===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
extruder: pressure_advance: 0.048000
pressure_advance_smooth_time: 0.040000
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Configured MCU 'host' (1024 moves)
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 547602244176: {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
=============== Log rollover at Fri Jul 28 00:00:00 2023 ===============
Stats 64051.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49961075 bytes_read=8096120 bytes_retransmit=9 bytes_invalid=0 send_seq=963718 receive_seq=963718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110709 bytes_read=342898 bytes_retransmit=0 bytes_invalid=0 send_seq=18427 receive_seq=18427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997672 adj=49996870 sd_pos=798686 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.32 cputime=5659.148 memavail=3265680 print_time=18086.238 buffer_time=2.038 print_stall=0 extruder: target=210 temp=209.4 pwm=0.459
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64052.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49964550 bytes_read=8096698 bytes_retransmit=9 bytes_invalid=0 send_seq=963790 receive_seq=963790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110715 bytes_read=342914 bytes_retransmit=0 bytes_invalid=0 send_seq=18428 receive_seq=18428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997674 adj=49996870 sd_pos=798918 heater_bed: target=60 temp=60.0 pwm=0.363 sysload=0.29 cputime=5659.322 memavail=3265240 print_time=18087.273 buffer_time=2.073 print_stall=0 extruder: target=210 temp=209.6 pwm=0.426
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64053.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49969350 bytes_read=8097370 bytes_retransmit=9 bytes_invalid=0 send_seq=963881 receive_seq=963881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=110721 bytes_read=342943 bytes_retransmit=0 bytes_invalid=0 send_seq=18429 receive_seq=18429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997677 adj=49996849 sd_pos=799044 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.29 cputime=5659.482 memavail=3265244 print_time=18088.249 buffer_time=2.048 print_stall=0 extruder: target=210 temp=209.7 pwm=0.426
Stats 64054.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49972789 bytes_read=8097931 bytes_retransmit=9 bytes_invalid=0 send_seq=963950 receive_seq=963950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=110727 bytes_read=342959 bytes_retransmit=0 bytes_invalid=0 send_seq=18430 receive_seq=18430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997679 adj=49996823 sd_pos=799188 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.29 cputime=5659.681 memavail=3265244 print_time=18089.281 buffer_time=2.078 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64055.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49978155 bytes_read=8098633 bytes_retransmit=9 bytes_invalid=0 send_seq=964050 receive_seq=964050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=88 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=110733 bytes_read=342975 bytes_retransmit=0 bytes_invalid=0 send_seq=18431 receive_seq=18431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997682 adj=49996839 sd_pos=799886 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5659.834 memavail=3265244 print_time=18090.357 buffer_time=2.154 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
Stats 64056.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49981449 bytes_read=8099175 bytes_retransmit=9 bytes_invalid=0 send_seq=964115 receive_seq=964115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=110739 bytes_read=342991 bytes_retransmit=0 bytes_invalid=0 send_seq=18432 receive_seq=18432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997684 adj=49996753 sd_pos=799932 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.29 cputime=5660.078 memavail=3264236 print_time=18091.357 buffer_time=2.153 print_stall=0 extruder: target=210 temp=210.3 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64057.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49985356 bytes_read=8099787 bytes_retransmit=9 bytes_invalid=0 send_seq=964191 receive_seq=964191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=110745 bytes_read=343007 bytes_retransmit=0 bytes_invalid=0 send_seq=18433 receive_seq=18433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997686 adj=49996806 sd_pos=800267 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.27 cputime=5660.264 memavail=3264236 print_time=18092.438 buffer_time=2.233 print_stall=0 extruder: target=210 temp=210.5 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64058.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49990036 bytes_read=8100439 bytes_retransmit=9 bytes_invalid=0 send_seq=964281 receive_seq=964281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=63 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110751 bytes_read=343036 bytes_retransmit=0 bytes_invalid=0 send_seq=18434 receive_seq=18434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997691 adj=49996829 sd_pos=800368 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.27 cputime=5660.426 memavail=3264236 print_time=18093.364 buffer_time=2.158 print_stall=0 extruder: target=210 temp=210.5 pwm=0.317
Stats 64059.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49993360 bytes_read=8100995 bytes_retransmit=9 bytes_invalid=0 send_seq=964349 receive_seq=964349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=534 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110757 bytes_read=343052 bytes_retransmit=0 bytes_invalid=0 send_seq=18435 receive_seq=18435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997693 adj=49996893 sd_pos=800511 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.27 cputime=5660.635 memavail=3264236 print_time=18094.413 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.6 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64060.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=49998580 bytes_read=8101692 bytes_retransmit=9 bytes_invalid=0 send_seq=964446 receive_seq=964446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=579 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110763 bytes_read=343068 bytes_retransmit=0 bytes_invalid=0 send_seq=18436 receive_seq=18436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997694 adj=49996899 sd_pos=801249 heater_bed: target=60 temp=60.0 pwm=0.299 sysload=0.27 cputime=5660.777 memavail=3264236 print_time=18095.466 buffer_time=2.259 print_stall=0 extruder: target=210 temp=210.5 pwm=0.317
Stats 64061.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50001814 bytes_read=8102219 bytes_retransmit=9 bytes_invalid=0 send_seq=964511 receive_seq=964511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110769 bytes_read=343084 bytes_retransmit=0 bytes_invalid=0 send_seq=18437 receive_seq=18437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997696 adj=49996898 sd_pos=801331 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5660.982 memavail=3264236 print_time=18096.237 buffer_time=2.030 print_stall=0 extruder: target=210 temp=210.4 pwm=0.388
Stats 64062.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50005039 bytes_read=8102753 bytes_retransmit=9 bytes_invalid=0 send_seq=964569 receive_seq=964569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110781 bytes_read=343116 bytes_retransmit=0 bytes_invalid=0 send_seq=18439 receive_seq=18439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997701 adj=49996918 sd_pos=801331 heater_bed: target=60 temp=60.0 pwm=0.381 sysload=0.25 cputime=5661.168 memavail=3264236 print_time=18097.237 buffer_time=2.029 print_stall=0 extruder: target=210 temp=210.2 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64063.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50009562 bytes_read=8103419 bytes_retransmit=9 bytes_invalid=0 send_seq=964659 receive_seq=964659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110787 bytes_read=343145 bytes_retransmit=0 bytes_invalid=0 send_seq=18440 receive_seq=18440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997705 adj=49997001 sd_pos=801682 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.25 cputime=5661.309 memavail=3264244 print_time=18098.240 buffer_time=2.032 print_stall=0 extruder: target=210 temp=209.9 pwm=0.456
Stats 64064.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50013316 bytes_read=8103996 bytes_retransmit=9 bytes_invalid=0 send_seq=964734 receive_seq=964734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110793 bytes_read=343161 bytes_retransmit=0 bytes_invalid=0 send_seq=18441 receive_seq=18441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997708 adj=49997024 sd_pos=801826 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.25 cputime=5661.517 memavail=3264244 print_time=18099.277 buffer_time=2.069 print_stall=0 extruder: target=210 temp=209.7 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64065.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50018521 bytes_read=8104708 bytes_retransmit=9 bytes_invalid=0 send_seq=964833 receive_seq=964833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=174 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110799 bytes_read=343177 bytes_retransmit=0 bytes_invalid=0 send_seq=18442 receive_seq=18442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997711 adj=49996979 sd_pos=802518 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.25 cputime=5661.695 memavail=3264244 print_time=18100.558 buffer_time=2.349 print_stall=0 extruder: target=210 temp=209.6 pwm=0.456
Stats 64066.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50021371 bytes_read=8105214 bytes_retransmit=9 bytes_invalid=0 send_seq=964891 receive_seq=964891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110805 bytes_read=343193 bytes_retransmit=0 bytes_invalid=0 send_seq=18443 receive_seq=18443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997717 adj=49996944 sd_pos=802629 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.25 cputime=5661.889 memavail=3265000 print_time=18101.309 buffer_time=2.100 print_stall=0 extruder: target=210 temp=209.4 pwm=0.456
Stats 64067.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50024430 bytes_read=8105747 bytes_retransmit=9 bytes_invalid=0 send_seq=964954 receive_seq=964954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110811 bytes_read=343209 bytes_retransmit=0 bytes_invalid=0 send_seq=18444 receive_seq=18444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997719 adj=49997012 sd_pos=802629 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.23 cputime=5662.076 memavail=3265000 print_time=18102.309 buffer_time=2.100 print_stall=0 extruder: target=210 temp=209.4 pwm=0.438
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64068.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50029520 bytes_read=8106444 bytes_retransmit=9 bytes_invalid=0 send_seq=965050 receive_seq=965050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=110817 bytes_read=343238 bytes_retransmit=0 bytes_invalid=0 send_seq=18445 receive_seq=18445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997721 adj=49996993 sd_pos=802985 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.23 cputime=5662.223 memavail=3265000 print_time=18103.342 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.5 pwm=0.438
Stats 64069.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50033079 bytes_read=8107000 bytes_retransmit=9 bytes_invalid=0 send_seq=965118 receive_seq=965118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=49 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=110823 bytes_read=343254 bytes_retransmit=0 bytes_invalid=0 send_seq=18446 receive_seq=18446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997725 adj=49996973 sd_pos=803130 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.23 cputime=5662.428 memavail=3265000 print_time=18104.386 buffer_time=2.175 print_stall=0 extruder: target=210 temp=209.7 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64070.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50037233 bytes_read=8107595 bytes_retransmit=9 bytes_invalid=0 send_seq=965197 receive_seq=965197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=110829 bytes_read=343270 bytes_retransmit=0 bytes_invalid=0 send_seq=18447 receive_seq=18447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997727 adj=49996978 sd_pos=803831 heater_bed: target=60 temp=60.0 pwm=0.228 sysload=0.23 cputime=5662.585 memavail=3265000 print_time=18105.345 buffer_time=2.133 print_stall=0 extruder: target=210 temp=209.9 pwm=0.376
Stats 64071.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50041055 bytes_read=8108190 bytes_retransmit=9 bytes_invalid=0 send_seq=965273 receive_seq=965273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=110835 bytes_read=343286 bytes_retransmit=0 bytes_invalid=0 send_seq=18448 receive_seq=18448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997730 adj=49996982 sd_pos=803831 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.23 cputime=5662.790 memavail=3265000 print_time=18106.391 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
Stats 64072.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50044472 bytes_read=8108767 bytes_retransmit=9 bytes_invalid=0 send_seq=965342 receive_seq=965342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=110841 bytes_read=343302 bytes_retransmit=0 bytes_invalid=0 send_seq=18449 receive_seq=18449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997732 adj=49996943 sd_pos=803948 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.21 cputime=5662.994 memavail=3264504 print_time=18107.412 buffer_time=2.197 print_stall=0 extruder: target=210 temp=210.3 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64073.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50049588 bytes_read=8109444 bytes_retransmit=9 bytes_invalid=0 send_seq=965437 receive_seq=965437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=228 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110847 bytes_read=343331 bytes_retransmit=0 bytes_invalid=0 send_seq=18450 receive_seq=18450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997734 adj=49996931 sd_pos=804375 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.21 cputime=5663.144 memavail=3264504 print_time=18108.402 buffer_time=2.187 print_stall=0 extruder: target=210 temp=210.5 pwm=0.324
Stats 64074.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50052873 bytes_read=8109991 bytes_retransmit=9 bytes_invalid=0 send_seq=965503 receive_seq=965503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=130 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110853 bytes_read=343347 bytes_retransmit=0 bytes_invalid=0 send_seq=18451 receive_seq=18451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997736 adj=49996930 sd_pos=804375 heater_bed: target=60 temp=60.0 pwm=0.013 sysload=0.21 cputime=5663.338 memavail=3264504 print_time=18109.402 buffer_time=2.186 print_stall=0 extruder: target=210 temp=210.5 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64075.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50056383 bytes_read=8110547 bytes_retransmit=9 bytes_invalid=0 send_seq=965571 receive_seq=965571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110859 bytes_read=343363 bytes_retransmit=0 bytes_invalid=0 send_seq=18452 receive_seq=18452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997738 adj=49996907 sd_pos=804997 heater_bed: target=60 temp=60.0 pwm=0.321 sysload=0.21 cputime=5663.472 memavail=3264504 print_time=18110.248 buffer_time=2.032 print_stall=0 extruder: target=210 temp=210.5 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64076.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50060674 bytes_read=8111159 bytes_retransmit=9 bytes_invalid=0 send_seq=965653 receive_seq=965653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110865 bytes_read=343379 bytes_retransmit=0 bytes_invalid=0 send_seq=18453 receive_seq=18453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997741 adj=49996913 sd_pos=805131 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.21 cputime=5663.629 memavail=3264004 print_time=18111.225 buffer_time=2.008 print_stall=0 extruder: target=210 temp=210.4 pwm=0.379
Stats 64077.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50064180 bytes_read=8111742 bytes_retransmit=9 bytes_invalid=0 send_seq=965723 receive_seq=965723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=110871 bytes_read=343395 bytes_retransmit=0 bytes_invalid=0 send_seq=18454 receive_seq=18454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997742 adj=49996940 sd_pos=805253 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.35 cputime=5663.889 memavail=3263764 print_time=18112.235 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64078.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50069562 bytes_read=8112468 bytes_retransmit=9 bytes_invalid=0 send_seq=965825 receive_seq=965825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=345 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110877 bytes_read=343424 bytes_retransmit=0 bytes_invalid=0 send_seq=18455 receive_seq=18455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997744 adj=49996888 sd_pos=805617 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.35 cputime=5664.082 memavail=3263764 print_time=18113.460 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.0 pwm=0.432
Stats 64079.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50073148 bytes_read=8113040 bytes_retransmit=9 bytes_invalid=0 send_seq=965896 receive_seq=965896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=507 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110883 bytes_read=343440 bytes_retransmit=0 bytes_invalid=0 send_seq=18456 receive_seq=18456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997746 adj=49996830 sd_pos=805761 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.35 cputime=5664.291 memavail=3263764 print_time=18114.501 buffer_time=2.213 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64080.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50076697 bytes_read=8113606 bytes_retransmit=9 bytes_invalid=0 send_seq=965966 receive_seq=965966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110889 bytes_read=343456 bytes_retransmit=0 bytes_invalid=0 send_seq=18457 receive_seq=18457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997750 adj=49996842 sd_pos=806325 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.35 cputime=5664.422 memavail=3263764 print_time=18115.296 buffer_time=2.008 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64081.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50081432 bytes_read=8114258 bytes_retransmit=9 bytes_invalid=0 send_seq=966057 receive_seq=966057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110895 bytes_read=343472 bytes_retransmit=0 bytes_invalid=0 send_seq=18458 receive_seq=18458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997755 adj=49996890 sd_pos=806570 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.35 cputime=5664.599 memavail=3263512 print_time=18116.299 buffer_time=2.009 print_stall=0 extruder: target=210 temp=209.4 pwm=0.432
Stats 64082.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50084624 bytes_read=8114811 bytes_retransmit=9 bytes_invalid=0 send_seq=966121 receive_seq=966121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110901 bytes_read=343488 bytes_retransmit=0 bytes_invalid=0 send_seq=18459 receive_seq=18459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997756 adj=49996951 sd_pos=806570 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.32 cputime=5664.846 memavail=3263512 print_time=18117.299 buffer_time=2.009 print_stall=0 extruder: target=210 temp=209.4 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64084.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50090260 bytes_read=8115542 bytes_retransmit=9 bytes_invalid=0 send_seq=966224 receive_seq=966224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=110907 bytes_read=343517 bytes_retransmit=0 bytes_invalid=0 send_seq=18460 receive_seq=18460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997759 adj=49996930 sd_pos=806925 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.32 cputime=5665.028 memavail=3263516 print_time=18118.526 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.5 pwm=0.451
Stats 64085.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50093676 bytes_read=8116044 bytes_retransmit=9 bytes_invalid=0 send_seq=966284 receive_seq=966284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=110913 bytes_read=343533 bytes_retransmit=0 bytes_invalid=0 send_seq=18461 receive_seq=18461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997761 adj=49996928 sd_pos=806998 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.32 cputime=5665.229 memavail=3263516 print_time=18119.540 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.6 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64086.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50098003 bytes_read=8116695 bytes_retransmit=9 bytes_invalid=0 send_seq=966368 receive_seq=966368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=110919 bytes_read=343549 bytes_retransmit=0 bytes_invalid=0 send_seq=18462 receive_seq=18462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997763 adj=49996929 sd_pos=807739 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.32 cputime=5665.381 memavail=3263520 print_time=18120.472 buffer_time=2.139 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
Stats 64087.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50102081 bytes_read=8117297 bytes_retransmit=9 bytes_invalid=0 send_seq=966448 receive_seq=966448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=17 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=110925 bytes_read=343565 bytes_retransmit=0 bytes_invalid=0 send_seq=18463 receive_seq=18463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997765 adj=49996936 sd_pos=807850 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.32 cputime=5665.589 memavail=3264024 print_time=18121.561 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.9 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64088.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50106061 bytes_read=8117930 bytes_retransmit=9 bytes_invalid=0 send_seq=966528 receive_seq=966528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=110931 bytes_read=343581 bytes_retransmit=0 bytes_invalid=0 send_seq=18464 receive_seq=18464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997770 adj=49996927 sd_pos=808078 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.30 cputime=5665.834 memavail=3264024 print_time=18122.748 buffer_time=2.385 print_stall=0 extruder: target=210 temp=210.1 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64089.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50110069 bytes_read=8118546 bytes_retransmit=9 bytes_invalid=0 send_seq=966608 receive_seq=966608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110937 bytes_read=343610 bytes_retransmit=0 bytes_invalid=0 send_seq=18465 receive_seq=18465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997772 adj=49996941 sd_pos=808205 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.30 cputime=5665.956 memavail=3263784 print_time=18123.440 buffer_time=2.076 print_stall=0 extruder: target=210 temp=210.2 pwm=0.353
Stats 64090.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50113217 bytes_read=8119073 bytes_retransmit=9 bytes_invalid=0 send_seq=966673 receive_seq=966673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110943 bytes_read=343626 bytes_retransmit=0 bytes_invalid=0 send_seq=18466 receive_seq=18466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997776 adj=49996994 sd_pos=808205 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.30 cputime=5666.144 memavail=3263784 print_time=18124.441 buffer_time=2.075 print_stall=0 extruder: target=210 temp=210.3 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64091.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50117861 bytes_read=8119730 bytes_retransmit=9 bytes_invalid=0 send_seq=966761 receive_seq=966761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110949 bytes_read=343641 bytes_retransmit=0 bytes_invalid=0 send_seq=18467 receive_seq=18467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997778 adj=49996995 sd_pos=809042 heater_bed: target=60 temp=60.0 pwm=0.215 sysload=0.30 cputime=5666.305 memavail=3263788 print_time=18125.455 buffer_time=2.089 print_stall=0 extruder: target=210 temp=210.4 pwm=0.353
Stats 64092.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50122003 bytes_read=8120350 bytes_retransmit=9 bytes_invalid=0 send_seq=966842 receive_seq=966842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=108 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110955 bytes_read=343656 bytes_retransmit=0 bytes_invalid=0 send_seq=18468 receive_seq=18468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997780 adj=49996977 sd_pos=809114 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.30 cputime=5666.512 memavail=3263792 print_time=18126.513 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.5 pwm=0.353
Stats 64093.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50125282 bytes_read=8120903 bytes_retransmit=9 bytes_invalid=0 send_seq=966910 receive_seq=966910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110961 bytes_read=343671 bytes_retransmit=0 bytes_invalid=0 send_seq=18469 receive_seq=18469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997784 adj=49996977 sd_pos=809160 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.27 cputime=5666.739 memavail=3263792 print_time=18127.513 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.4 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64094.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50130566 bytes_read=8121615 bytes_retransmit=9 bytes_invalid=0 send_seq=967009 receive_seq=967009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=58 freq=400007866 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110967 bytes_read=343699 bytes_retransmit=0 bytes_invalid=0 send_seq=18470 receive_seq=18470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997785 adj=49996948 sd_pos=809615 heater_bed: target=60 temp=60.0 pwm=0.256 sysload=0.27 cputime=5666.903 memavail=3263792 print_time=18128.501 buffer_time=2.133 print_stall=0 extruder: target=210 temp=210.3 pwm=0.378
Stats 64095.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50133752 bytes_read=8122151 bytes_retransmit=9 bytes_invalid=0 send_seq=967073 receive_seq=967073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=58 freq=400007874 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110973 bytes_read=343714 bytes_retransmit=0 bytes_invalid=0 send_seq=18471 receive_seq=18471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997788 adj=49996668 sd_pos=809615 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.27 cputime=5667.095 memavail=3263792 print_time=18129.501 buffer_time=2.133 print_stall=0 extruder: target=210 temp=210.1 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64096.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50137956 bytes_read=8122743 bytes_retransmit=9 bytes_invalid=0 send_seq=967151 receive_seq=967151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007851 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110979 bytes_read=343729 bytes_retransmit=0 bytes_invalid=0 send_seq=18472 receive_seq=18472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997788 adj=49996713 sd_pos=810372 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.27 cputime=5667.233 memavail=3263292 print_time=18130.487 buffer_time=2.118 print_stall=0 extruder: target=210 temp=210.0 pwm=0.430
Stats 64097.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50141903 bytes_read=8123350 bytes_retransmit=9 bytes_invalid=0 send_seq=967229 receive_seq=967229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007849 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110985 bytes_read=343745 bytes_retransmit=0 bytes_invalid=0 send_seq=18473 receive_seq=18473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997791 adj=49996769 sd_pos=810488 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.27 cputime=5667.428 memavail=3262788 print_time=18131.494 buffer_time=2.124 print_stall=0 extruder: target=210 temp=209.8 pwm=0.430
Stats 64098.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50145458 bytes_read=8123947 bytes_retransmit=9 bytes_invalid=0 send_seq=967302 receive_seq=967302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007837 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110991 bytes_read=343761 bytes_retransmit=0 bytes_invalid=0 send_seq=18474 receive_seq=18474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997792 adj=49996809 sd_pos=810488 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.33 cputime=5667.626 memavail=3262788 print_time=18132.557 buffer_time=2.185 print_stall=0 extruder: target=210 temp=209.7 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64099.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50150120 bytes_read=8124594 bytes_retransmit=9 bytes_invalid=0 send_seq=967391 receive_seq=967391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007837 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110997 bytes_read=343790 bytes_retransmit=0 bytes_invalid=0 send_seq=18475 receive_seq=18475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997796 adj=49996844 sd_pos=810845 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.33 cputime=5667.844 memavail=3262788 print_time=18133.529 buffer_time=2.157 print_stall=0 extruder: target=210 temp=209.7 pwm=0.430
Stats 64100.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50153354 bytes_read=8125136 bytes_retransmit=9 bytes_invalid=0 send_seq=967456 receive_seq=967456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007833 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111003 bytes_read=343806 bytes_retransmit=0 bytes_invalid=0 send_seq=18476 receive_seq=18476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997796 adj=49996891 sd_pos=810845 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.33 cputime=5668.031 memavail=3262788 print_time=18134.529 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.8 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64101.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50157550 bytes_read=8125767 bytes_retransmit=9 bytes_invalid=0 send_seq=967539 receive_seq=967539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=400007818 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111009 bytes_read=343822 bytes_retransmit=0 bytes_invalid=0 send_seq=18477 receive_seq=18477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997797 adj=49996885 sd_pos=811712 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.33 cputime=5668.183 memavail=3262788 print_time=18135.485 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.8 pwm=0.435
Stats 64102.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50161880 bytes_read=8126394 bytes_retransmit=9 bytes_invalid=0 send_seq=967624 receive_seq=967624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007801 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111015 bytes_read=343838 bytes_retransmit=0 bytes_invalid=0 send_seq=18478 receive_seq=18478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997800 adj=49996914 sd_pos=811783 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.33 cputime=5668.390 memavail=3262788 print_time=18136.594 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.9 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64103.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50165100 bytes_read=8126959 bytes_retransmit=9 bytes_invalid=0 send_seq=967691 receive_seq=967691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111021 bytes_read=343854 bytes_retransmit=0 bytes_invalid=0 send_seq=18479 receive_seq=18479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997803 adj=49996952 sd_pos=811968 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.31 cputime=5668.575 memavail=3262540 print_time=18137.581 buffer_time=2.195 print_stall=0 extruder: target=210 temp=210.1 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64104.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50169884 bytes_read=8127632 bytes_retransmit=9 bytes_invalid=0 send_seq=967783 receive_seq=967783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111027 bytes_read=343883 bytes_retransmit=0 bytes_invalid=0 send_seq=18480 receive_seq=18480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997807 adj=49996996 sd_pos=812215 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.31 cputime=5668.785 memavail=3262540 print_time=18138.567 buffer_time=2.177 print_stall=0 extruder: target=210 temp=210.2 pwm=0.383
Stats 64105.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50173452 bytes_read=8128194 bytes_retransmit=9 bytes_invalid=0 send_seq=967855 receive_seq=967855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=91 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111033 bytes_read=343899 bytes_retransmit=0 bytes_invalid=0 send_seq=18481 receive_seq=18481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997812 adj=49997032 sd_pos=812355 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.31 cputime=5668.991 memavail=3262540 print_time=18139.605 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.4 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64106.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50177926 bytes_read=8128851 bytes_retransmit=9 bytes_invalid=0 send_seq=967943 receive_seq=967943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007743 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111039 bytes_read=343915 bytes_retransmit=0 bytes_invalid=0 send_seq=18482 receive_seq=18482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997814 adj=49997062 sd_pos=813054 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.31 cputime=5669.146 memavail=3262540 print_time=18140.568 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.4 pwm=0.383
Stats 64107.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50181898 bytes_read=8129457 bytes_retransmit=9 bytes_invalid=0 send_seq=968021 receive_seq=968021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=157 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111045 bytes_read=343931 bytes_retransmit=0 bytes_invalid=0 send_seq=18483 receive_seq=18483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997817 adj=49997086 sd_pos=813054 heater_bed: target=60 temp=60.0 pwm=0.018 sysload=0.31 cputime=5669.339 memavail=3261288 print_time=18141.604 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.5 pwm=0.343
Stats 64108.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50185287 bytes_read=8130015 bytes_retransmit=9 bytes_invalid=0 send_seq=968089 receive_seq=968089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111051 bytes_read=343947 bytes_retransmit=0 bytes_invalid=0 send_seq=18484 receive_seq=18484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997819 adj=49997070 sd_pos=813167 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.52 cputime=5669.544 memavail=3260124 print_time=18142.604 buffer_time=2.202 print_stall=0 extruder: target=210 temp=210.5 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64109.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50190133 bytes_read=8130677 bytes_retransmit=9 bytes_invalid=0 send_seq=968178 receive_seq=968178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111057 bytes_read=343963 bytes_retransmit=0 bytes_invalid=0 send_seq=18485 receive_seq=18485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997820 adj=49997064 sd_pos=813560 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.52 cputime=5669.699 memavail=3259388 print_time=18143.581 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.4 pwm=0.343
Stats 64110.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50193414 bytes_read=8131228 bytes_retransmit=9 bytes_invalid=0 send_seq=968245 receive_seq=968245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111063 bytes_read=343992 bytes_retransmit=0 bytes_invalid=0 send_seq=18486 receive_seq=18486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997821 adj=49997083 sd_pos=813629 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.52 cputime=5669.958 memavail=3259388 print_time=18144.602 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.4 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64111.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50198470 bytes_read=8131910 bytes_retransmit=9 bytes_invalid=0 send_seq=968341 receive_seq=968341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=978 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111069 bytes_read=344008 bytes_retransmit=0 bytes_invalid=0 send_seq=18487 receive_seq=18487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997823 adj=49997063 sd_pos=814392 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.52 cputime=5670.131 memavail=3259388 print_time=18145.808 buffer_time=2.404 print_stall=0 extruder: target=210 temp=210.2 pwm=0.390
Stats 64112.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50201674 bytes_read=8132452 bytes_retransmit=9 bytes_invalid=0 send_seq=968406 receive_seq=968406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=210 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111075 bytes_read=344024 bytes_retransmit=0 bytes_invalid=0 send_seq=18488 receive_seq=18488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997824 adj=49997023 sd_pos=814502 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.52 cputime=5670.297 memavail=3259136 print_time=18146.559 buffer_time=2.154 print_stall=0 extruder: target=210 temp=210.0 pwm=0.390
Stats 64113.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50205075 bytes_read=8133024 bytes_retransmit=9 bytes_invalid=0 send_seq=968474 receive_seq=968474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111081 bytes_read=344040 bytes_retransmit=0 bytes_invalid=0 send_seq=18489 receive_seq=18489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997824 adj=49997043 sd_pos=814502 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.48 cputime=5670.487 memavail=3259136 print_time=18147.560 buffer_time=2.154 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64114.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50210233 bytes_read=8133712 bytes_retransmit=9 bytes_invalid=0 send_seq=968572 receive_seq=968572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111087 bytes_read=344056 bytes_retransmit=0 bytes_invalid=0 send_seq=18490 receive_seq=18490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997826 adj=49997026 sd_pos=814858 heater_bed: target=60 temp=60.0 pwm=0.020 sysload=0.48 cputime=5670.638 memavail=3259136 print_time=18148.546 buffer_time=2.140 print_stall=0 extruder: target=210 temp=209.7 pwm=0.454
Stats 64115.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50213485 bytes_read=8134263 bytes_retransmit=9 bytes_invalid=0 send_seq=968639 receive_seq=968639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111093 bytes_read=344085 bytes_retransmit=0 bytes_invalid=0 send_seq=18491 receive_seq=18491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997832 adj=49997034 sd_pos=814858 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.48 cputime=5670.866 memavail=3259136 print_time=18149.546 buffer_time=2.140 print_stall=0 extruder: target=210 temp=209.5 pwm=0.454
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64116.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50217943 bytes_read=8134914 bytes_retransmit=9 bytes_invalid=0 send_seq=968726 receive_seq=968726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111099 bytes_read=344101 bytes_retransmit=0 bytes_invalid=0 send_seq=18492 receive_seq=18492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997835 adj=49997036 sd_pos=815695 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.48 cputime=5671.020 memavail=3259388 print_time=18150.553 buffer_time=2.146 print_stall=0 extruder: target=210 temp=209.4 pwm=0.454
Stats 64117.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50221777 bytes_read=8135501 bytes_retransmit=9 bytes_invalid=0 send_seq=968803 receive_seq=968803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111105 bytes_read=344117 bytes_retransmit=0 bytes_invalid=0 send_seq=18493 receive_seq=18493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997838 adj=49997072 sd_pos=815805 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.48 cputime=5671.224 memavail=3263856 print_time=18151.594 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.4 pwm=0.454
Stats 64118.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50225018 bytes_read=8136074 bytes_retransmit=9 bytes_invalid=0 send_seq=968871 receive_seq=968871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111111 bytes_read=344133 bytes_retransmit=0 bytes_invalid=0 send_seq=18494 receive_seq=18494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997838 adj=49997069 sd_pos=815805 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.44 cputime=5671.413 memavail=3263856 print_time=18152.594 buffer_time=2.185 print_stall=0 extruder: target=210 temp=209.5 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64119.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50230044 bytes_read=8136770 bytes_retransmit=9 bytes_invalid=0 send_seq=968967 receive_seq=968967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111117 bytes_read=344149 bytes_retransmit=0 bytes_invalid=0 send_seq=18495 receive_seq=18495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997838 adj=49997045 sd_pos=816164 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.44 cputime=5671.554 memavail=3263604 print_time=18153.565 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.7 pwm=0.427
Stats 64120.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50233434 bytes_read=8137317 bytes_retransmit=9 bytes_invalid=0 send_seq=969036 receive_seq=969036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=7 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111123 bytes_read=344178 bytes_retransmit=0 bytes_invalid=0 send_seq=18496 receive_seq=18496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997839 adj=49997047 sd_pos=816280 heater_bed: target=60 temp=60.0 pwm=0.281 sysload=0.44 cputime=5671.808 memavail=3268108 print_time=18154.587 buffer_time=2.177 print_stall=0 extruder: target=210 temp=209.8 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64121.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50237341 bytes_read=8137924 bytes_retransmit=9 bytes_invalid=0 send_seq=969114 receive_seq=969114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111129 bytes_read=344194 bytes_retransmit=0 bytes_invalid=0 send_seq=18497 receive_seq=18497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997841 adj=49997037 sd_pos=817007 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.44 cputime=5671.972 memavail=3267128 print_time=18155.493 buffer_time=2.083 print_stall=0 extruder: target=210 temp=210.0 pwm=0.364
Stats 64122.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50241446 bytes_read=8138545 bytes_retransmit=9 bytes_invalid=0 send_seq=969195 receive_seq=969195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111135 bytes_read=344210 bytes_retransmit=0 bytes_invalid=0 send_seq=18498 receive_seq=18498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997842 adj=49997050 sd_pos=817007 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.44 cputime=5672.159 memavail=3267128 print_time=18156.598 buffer_time=2.188 print_stall=0 extruder: target=210 temp=210.2 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64123.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50245879 bytes_read=8139193 bytes_retransmit=9 bytes_invalid=0 send_seq=969281 receive_seq=969281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=64 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111141 bytes_read=344226 bytes_retransmit=0 bytes_invalid=0 send_seq=18499 receive_seq=18499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997845 adj=49996973 sd_pos=817369 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.41 cputime=5672.365 memavail=3265632 print_time=18157.801 buffer_time=2.389 print_stall=0 extruder: target=210 temp=210.5 pwm=0.312
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64124.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50249920 bytes_read=8139805 bytes_retransmit=9 bytes_invalid=0 send_seq=969360 receive_seq=969360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111147 bytes_read=344242 bytes_retransmit=0 bytes_invalid=0 send_seq=18500 receive_seq=18500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997848 adj=49996920 sd_pos=817543 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.41 cputime=5672.518 memavail=3265632 print_time=18158.617 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.5 pwm=0.312
Stats 64125.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50253049 bytes_read=8140342 bytes_retransmit=9 bytes_invalid=0 send_seq=969425 receive_seq=969425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111153 bytes_read=344271 bytes_retransmit=0 bytes_invalid=0 send_seq=18501 receive_seq=18501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997852 adj=49996939 sd_pos=817617 heater_bed: target=60 temp=60.0 pwm=0.023 sysload=0.41 cputime=5672.741 memavail=3265632 print_time=18159.607 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.6 pwm=0.312
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64126.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50258199 bytes_read=8141034 bytes_retransmit=9 bytes_invalid=0 send_seq=969523 receive_seq=969523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111159 bytes_read=344287 bytes_retransmit=0 bytes_invalid=0 send_seq=18502 receive_seq=18502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997852 adj=49996946 sd_pos=818348 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.41 cputime=5672.901 memavail=3265632 print_time=18160.637 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.5 pwm=0.387
Stats 64127.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50261409 bytes_read=8141600 bytes_retransmit=9 bytes_invalid=0 send_seq=969590 receive_seq=969590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111165 bytes_read=344303 bytes_retransmit=0 bytes_invalid=0 send_seq=18503 receive_seq=18503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997852 adj=49996922 sd_pos=818348 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.41 cputime=5673.087 memavail=3266140 print_time=18161.637 buffer_time=2.193 print_stall=0 extruder: target=210 temp=210.3 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64128.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50264848 bytes_read=8142163 bytes_retransmit=9 bytes_invalid=0 send_seq=969659 receive_seq=969659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111171 bytes_read=344319 bytes_retransmit=0 bytes_invalid=0 send_seq=18504 receive_seq=18504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997856 adj=49996911 sd_pos=818723 heater_bed: target=60 temp=60.0 pwm=0.337 sysload=0.37 cputime=5673.259 memavail=3266140 print_time=18162.639 buffer_time=2.193 print_stall=0 extruder: target=210 temp=210.1 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64129.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50269622 bytes_read=8142820 bytes_retransmit=9 bytes_invalid=0 send_seq=969750 receive_seq=969750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111177 bytes_read=344335 bytes_retransmit=0 bytes_invalid=0 send_seq=18505 receive_seq=18505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997858 adj=49996935 sd_pos=818893 heater_bed: target=60 temp=60.0 pwm=0.024 sysload=0.37 cputime=5673.423 memavail=3266140 print_time=18163.633 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.9 pwm=0.387
Stats 64130.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50272844 bytes_read=8143381 bytes_retransmit=9 bytes_invalid=0 send_seq=969816 receive_seq=969816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111183 bytes_read=344364 bytes_retransmit=0 bytes_invalid=0 send_seq=18506 receive_seq=18506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997859 adj=49996980 sd_pos=818893 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.37 cputime=5673.611 memavail=3266140 print_time=18164.633 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.7 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64131.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50277754 bytes_read=8144043 bytes_retransmit=9 bytes_invalid=0 send_seq=969908 receive_seq=969908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111189 bytes_read=344380 bytes_retransmit=0 bytes_invalid=0 send_seq=18507 receive_seq=18507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997865 adj=49996961 sd_pos=819657 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.37 cputime=5673.809 memavail=3266140 print_time=18165.647 buffer_time=2.199 print_stall=0 extruder: target=210 temp=209.5 pwm=0.456
Stats 64132.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50281186 bytes_read=8144610 bytes_retransmit=9 bytes_invalid=0 send_seq=969978 receive_seq=969978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111195 bytes_read=344396 bytes_retransmit=0 bytes_invalid=0 send_seq=18508 receive_seq=18508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997867 adj=49996897 sd_pos=819727 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.37 cputime=5674.010 memavail=3266140 print_time=18166.677 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.4 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64133.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50284593 bytes_read=8145187 bytes_retransmit=9 bytes_invalid=0 send_seq=970047 receive_seq=970047 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007797 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111201 bytes_read=344412 bytes_retransmit=0 bytes_invalid=0 send_seq=18509 receive_seq=18509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997871 adj=49996952 sd_pos=819957 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.34 cputime=5674.165 memavail=3265900 print_time=18167.607 buffer_time=2.138 print_stall=0 extruder: target=210 temp=209.5 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64134.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50289183 bytes_read=8145850 bytes_retransmit=9 bytes_invalid=0 send_seq=970137 receive_seq=970137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111213 bytes_read=344444 bytes_retransmit=0 bytes_invalid=0 send_seq=18511 receive_seq=18511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997874 adj=49997041 sd_pos=820083 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.34 cputime=5674.326 memavail=3265900 print_time=18168.495 buffer_time=2.025 print_stall=0 extruder: target=210 temp=209.5 pwm=0.455
Stats 64135.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50292547 bytes_read=8146406 bytes_retransmit=9 bytes_invalid=0 send_seq=970205 receive_seq=970205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007769 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111219 bytes_read=344473 bytes_retransmit=0 bytes_invalid=0 send_seq=18512 receive_seq=18512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997876 adj=49997070 sd_pos=820152 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.34 cputime=5674.525 memavail=3265900 print_time=18169.515 buffer_time=2.043 print_stall=0 extruder: target=210 temp=209.6 pwm=0.405
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64136.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50297728 bytes_read=8147104 bytes_retransmit=9 bytes_invalid=0 send_seq=970302 receive_seq=970302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111225 bytes_read=344489 bytes_retransmit=0 bytes_invalid=0 send_seq=18513 receive_seq=18513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997875 adj=49997089 sd_pos=820951 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.34 cputime=5674.721 memavail=3265900 print_time=18170.530 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.9 pwm=0.405
Stats 64137.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50300895 bytes_read=8147636 bytes_retransmit=9 bytes_invalid=0 send_seq=970368 receive_seq=970368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111231 bytes_read=344505 bytes_retransmit=0 bytes_invalid=0 send_seq=18514 receive_seq=18514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997877 adj=49997048 sd_pos=820951 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.34 cputime=5674.907 memavail=3265660 print_time=18171.530 buffer_time=2.058 print_stall=0 extruder: target=210 temp=210.1 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64138.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50305232 bytes_read=8148294 bytes_retransmit=9 bytes_invalid=0 send_seq=970453 receive_seq=970453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007765 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111237 bytes_read=344521 bytes_retransmit=0 bytes_invalid=0 send_seq=18515 receive_seq=18515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997880 adj=49997036 sd_pos=821428 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.39 cputime=5675.106 memavail=3265660 print_time=18172.658 buffer_time=2.185 print_stall=0 extruder: target=210 temp=210.2 pwm=0.348
Stats 64139.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50308478 bytes_read=8148835 bytes_retransmit=9 bytes_invalid=0 send_seq=970518 receive_seq=970518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=111243 bytes_read=344537 bytes_retransmit=0 bytes_invalid=0 send_seq=18516 receive_seq=18516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997884 adj=49997044 sd_pos=821428 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.39 cputime=5675.252 memavail=3265660 print_time=18173.503 buffer_time=2.029 print_stall=0 extruder: target=210 temp=210.4 pwm=0.348
Stats 64140.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50312223 bytes_read=8149407 bytes_retransmit=9 bytes_invalid=0 send_seq=970592 receive_seq=970592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111249 bytes_read=344566 bytes_retransmit=0 bytes_invalid=0 send_seq=18517 receive_seq=18517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997889 adj=49997100 sd_pos=821584 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.39 cputime=5675.455 memavail=3265660 print_time=18174.545 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.5 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64141.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50317045 bytes_read=8150069 bytes_retransmit=9 bytes_invalid=0 send_seq=970681 receive_seq=970681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111255 bytes_read=344582 bytes_retransmit=0 bytes_invalid=0 send_seq=18518 receive_seq=18518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997890 adj=49997154 sd_pos=822352 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.39 cputime=5675.638 memavail=3265660 print_time=18175.575 buffer_time=2.099 print_stall=0 extruder: target=210 temp=210.5 pwm=0.343
Stats 64142.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50320238 bytes_read=8150610 bytes_retransmit=9 bytes_invalid=0 send_seq=970746 receive_seq=970746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111261 bytes_read=344598 bytes_retransmit=0 bytes_invalid=0 send_seq=18519 receive_seq=18519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997892 adj=49997129 sd_pos=822352 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.39 cputime=5675.824 memavail=3265660 print_time=18176.575 buffer_time=2.099 print_stall=0 extruder: target=210 temp=210.3 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64143.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50324877 bytes_read=8151257 bytes_retransmit=9 bytes_invalid=0 send_seq=970835 receive_seq=970835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111267 bytes_read=344614 bytes_retransmit=0 bytes_invalid=0 send_seq=18520 receive_seq=18520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997896 adj=49997111 sd_pos=822755 heater_bed: target=60 temp=60.0 pwm=0.244 sysload=0.36 cputime=5676.004 memavail=3265660 print_time=18177.792 buffer_time=2.315 print_stall=0 extruder: target=210 temp=210.2 pwm=0.398
Stats 64144.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50328079 bytes_read=8151820 bytes_retransmit=9 bytes_invalid=0 send_seq=970901 receive_seq=970901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111273 bytes_read=344630 bytes_retransmit=0 bytes_invalid=0 send_seq=18521 receive_seq=18521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997900 adj=49997103 sd_pos=822755 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.36 cputime=5676.145 memavail=3265660 print_time=18178.547 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.1 pwm=0.398
Stats 64145.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50331861 bytes_read=8152411 bytes_retransmit=9 bytes_invalid=0 send_seq=970976 receive_seq=970976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111279 bytes_read=344659 bytes_retransmit=0 bytes_invalid=0 send_seq=18522 receive_seq=18522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997901 adj=49997115 sd_pos=822900 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.36 cputime=5676.351 memavail=3265664 print_time=18179.586 buffer_time=2.108 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64146.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50336814 bytes_read=8153074 bytes_retransmit=9 bytes_invalid=0 send_seq=971069 receive_seq=971069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111285 bytes_read=344675 bytes_retransmit=0 bytes_invalid=0 send_seq=18523 receive_seq=18523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997901 adj=49997040 sd_pos=823643 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.36 cputime=5676.501 memavail=3265664 print_time=18180.630 buffer_time=2.151 print_stall=0 extruder: target=210 temp=209.7 pwm=0.462
Stats 64147.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50340183 bytes_read=8153599 bytes_retransmit=9 bytes_invalid=0 send_seq=971131 receive_seq=971131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=400007765 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111291 bytes_read=344691 bytes_retransmit=0 bytes_invalid=0 send_seq=18524 receive_seq=18524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997902 adj=49997041 sd_pos=823713 heater_bed: target=60 temp=60.0 pwm=0.337 sysload=0.36 cputime=5676.762 memavail=3264920 print_time=18181.651 buffer_time=2.171 print_stall=0 extruder: target=210 temp=209.7 pwm=0.462
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64148.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50344766 bytes_read=8154265 bytes_retransmit=9 bytes_invalid=0 send_seq=971221 receive_seq=971221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007752 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111297 bytes_read=344707 bytes_retransmit=0 bytes_invalid=0 send_seq=18525 receive_seq=18525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997905 adj=49997035 sd_pos=824066 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.33 cputime=5676.965 memavail=3264920 print_time=18182.846 buffer_time=2.365 print_stall=0 extruder: target=210 temp=209.7 pwm=0.462
Stats 64149.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50348093 bytes_read=8154823 bytes_retransmit=9 bytes_invalid=0 send_seq=971289 receive_seq=971289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111303 bytes_read=344723 bytes_retransmit=0 bytes_invalid=0 send_seq=18526 receive_seq=18526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997905 adj=49997054 sd_pos=824066 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.33 cputime=5677.110 memavail=3264920 print_time=18183.629 buffer_time=2.147 print_stall=0 extruder: target=210 temp=209.6 pwm=0.462
Stats 64150.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50351263 bytes_read=8155360 bytes_retransmit=9 bytes_invalid=0 send_seq=971353 receive_seq=971353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007740 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111309 bytes_read=344752 bytes_retransmit=0 bytes_invalid=0 send_seq=18527 receive_seq=18527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997911 adj=49997078 sd_pos=824134 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.33 cputime=5677.299 memavail=3264920 print_time=18184.618 buffer_time=2.136 print_stall=0 extruder: target=210 temp=209.8 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64151.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50356697 bytes_read=8156086 bytes_retransmit=9 bytes_invalid=0 send_seq=971455 receive_seq=971455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=63 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111315 bytes_read=344768 bytes_retransmit=0 bytes_invalid=0 send_seq=18528 receive_seq=18528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997912 adj=49997125 sd_pos=824903 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.33 cputime=5677.460 memavail=3264920 print_time=18185.673 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.9 pwm=0.400
Stats 64152.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50359865 bytes_read=8156608 bytes_retransmit=9 bytes_invalid=0 send_seq=971519 receive_seq=971519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111321 bytes_read=344784 bytes_retransmit=0 bytes_invalid=0 send_seq=18529 receive_seq=18529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997913 adj=49997116 sd_pos=824903 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.33 cputime=5677.693 memavail=3264920 print_time=18186.673 buffer_time=2.190 print_stall=0 extruder: target=210 temp=210.1 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64153.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50363759 bytes_read=8157166 bytes_retransmit=9 bytes_invalid=0 send_seq=971596 receive_seq=971584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=1108 upcoming_bytes=0 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111327 bytes_read=344800 bytes_retransmit=0 bytes_invalid=0 send_seq=18530 receive_seq=18530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997916 adj=49997113 sd_pos=825375 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.31 cputime=5677.892 memavail=3264920 print_time=18187.812 buffer_time=2.320 print_stall=0 extruder: target=210 temp=210.3 pwm=0.338
Stats 64154.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50368372 bytes_read=8157872 bytes_retransmit=9 bytes_invalid=0 send_seq=971682 receive_seq=971682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=98 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111333 bytes_read=344816 bytes_retransmit=0 bytes_invalid=0 send_seq=18531 receive_seq=18531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997920 adj=49997091 sd_pos=825375 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.31 cputime=5678.045 memavail=3264920 print_time=18188.674 buffer_time=2.181 print_stall=0 extruder: target=210 temp=210.5 pwm=0.338
Stats 64155.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50371777 bytes_read=8158379 bytes_retransmit=9 bytes_invalid=0 send_seq=971743 receive_seq=971743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=70 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111339 bytes_read=344845 bytes_retransmit=0 bytes_invalid=0 send_seq=18532 receive_seq=18532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997926 adj=49997141 sd_pos=825445 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.31 cputime=5678.241 memavail=3264920 print_time=18189.697 buffer_time=2.205 print_stall=0 extruder: target=210 temp=210.5 pwm=0.338
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64156.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50376721 bytes_read=8159061 bytes_retransmit=9 bytes_invalid=0 send_seq=971836 receive_seq=971836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111345 bytes_read=344861 bytes_retransmit=0 bytes_invalid=0 send_seq=18533 receive_seq=18533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997928 adj=49997200 sd_pos=826317 heater_bed: target=60 temp=60.0 pwm=0.310 sysload=0.31 cputime=5678.412 memavail=3264920 print_time=18190.723 buffer_time=2.230 print_stall=0 extruder: target=210 temp=210.5 pwm=0.338
Stats 64157.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50380013 bytes_read=8159606 bytes_retransmit=9 bytes_invalid=0 send_seq=971903 receive_seq=971903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111351 bytes_read=344877 bytes_retransmit=0 bytes_invalid=0 send_seq=18534 receive_seq=18534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997931 adj=49997184 sd_pos=826317 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.31 cputime=5678.642 memavail=3265688 print_time=18191.723 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.4 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64158.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50384198 bytes_read=8160189 bytes_retransmit=9 bytes_invalid=0 send_seq=971985 receive_seq=971973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=945 upcoming_bytes=479 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111357 bytes_read=344893 bytes_retransmit=0 bytes_invalid=0 send_seq=18535 receive_seq=18535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997932 adj=49997212 sd_pos=826717 heater_bed: target=60 temp=60.0 pwm=0.233 sysload=0.28 cputime=5678.822 memavail=3265688 print_time=18192.981 buffer_time=2.425 print_stall=0 extruder: target=210 temp=210.4 pwm=0.363
Stats 64159.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50388457 bytes_read=8160855 bytes_retransmit=9 bytes_invalid=0 send_seq=972063 receive_seq=972063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=16 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111363 bytes_read=344909 bytes_retransmit=0 bytes_invalid=0 send_seq=18536 receive_seq=18536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997932 adj=49997142 sd_pos=826858 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.28 cputime=5678.989 memavail=3265688 print_time=18193.767 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.1 pwm=0.418
Stats 64160.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50391818 bytes_read=8161387 bytes_retransmit=9 bytes_invalid=0 send_seq=972129 receive_seq=972129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111369 bytes_read=344938 bytes_retransmit=0 bytes_invalid=0 send_seq=18537 receive_seq=18537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997932 adj=49997150 sd_pos=826858 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.28 cputime=5679.184 memavail=3265688 print_time=18194.767 buffer_time=2.205 print_stall=0 extruder: target=210 temp=209.9 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64161.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50396033 bytes_read=8162019 bytes_retransmit=9 bytes_invalid=0 send_seq=972212 receive_seq=972212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111375 bytes_read=344954 bytes_retransmit=0 bytes_invalid=0 send_seq=18538 receive_seq=18538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997935 adj=49997101 sd_pos=827600 heater_bed: target=60 temp=60.0 pwm=0.262 sysload=0.28 cputime=5679.298 memavail=3265688 print_time=18195.575 buffer_time=2.013 print_stall=0 extruder: target=210 temp=209.7 pwm=0.470
Stats 64162.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50399234 bytes_read=8162550 bytes_retransmit=9 bytes_invalid=0 send_seq=972275 receive_seq=972275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111381 bytes_read=344970 bytes_retransmit=0 bytes_invalid=0 send_seq=18539 receive_seq=18539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997938 adj=49997132 sd_pos=827600 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.28 cputime=5679.519 memavail=3265688 print_time=18196.576 buffer_time=2.012 print_stall=0 extruder: target=210 temp=209.6 pwm=0.470
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64163.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50404488 bytes_read=8163268 bytes_retransmit=9 bytes_invalid=0 send_seq=972375 receive_seq=972375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111387 bytes_read=344986 bytes_retransmit=0 bytes_invalid=0 send_seq=18540 receive_seq=18540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997940 adj=49997090 sd_pos=828028 heater_bed: target=60 temp=60.0 pwm=0.294 sysload=0.26 cputime=5679.724 memavail=3265688 print_time=18197.814 buffer_time=2.250 print_stall=0 extruder: target=210 temp=209.6 pwm=0.470
Stats 64164.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50407832 bytes_read=8163825 bytes_retransmit=9 bytes_invalid=0 send_seq=972443 receive_seq=972443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111393 bytes_read=345002 bytes_retransmit=0 bytes_invalid=0 send_seq=18541 receive_seq=18541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997944 adj=49997033 sd_pos=828074 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.26 cputime=5679.877 memavail=3265688 print_time=18198.583 buffer_time=2.017 print_stall=0 extruder: target=210 temp=209.5 pwm=0.470
Stats 64165.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50410909 bytes_read=8164356 bytes_retransmit=9 bytes_invalid=0 send_seq=972506 receive_seq=972506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=111399 bytes_read=345031 bytes_retransmit=0 bytes_invalid=0 send_seq=18542 receive_seq=18542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997945 adj=49997102 sd_pos=828074 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.26 cputime=5680.065 memavail=3265688 print_time=18199.584 buffer_time=2.017 print_stall=0 extruder: target=210 temp=209.7 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64166.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50416173 bytes_read=8165013 bytes_retransmit=9 bytes_invalid=0 send_seq=972597 receive_seq=972597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=111405 bytes_read=345047 bytes_retransmit=0 bytes_invalid=0 send_seq=18543 receive_seq=18543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997944 adj=49997106 sd_pos=828847 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.26 cputime=5680.209 memavail=3265696 print_time=18200.620 buffer_time=2.053 print_stall=0 extruder: target=210 temp=209.9 pwm=0.409
Stats 64167.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50419653 bytes_read=8165579 bytes_retransmit=9 bytes_invalid=0 send_seq=972667 receive_seq=972667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=111411 bytes_read=345063 bytes_retransmit=0 bytes_invalid=0 send_seq=18544 receive_seq=18544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997945 adj=49997120 sd_pos=829029 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.26 cputime=5680.419 memavail=3263932 print_time=18201.645 buffer_time=2.078 print_stall=0 extruder: target=210 temp=210.1 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64168.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50423218 bytes_read=8166167 bytes_retransmit=9 bytes_invalid=0 send_seq=972739 receive_seq=972739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=111417 bytes_read=345079 bytes_retransmit=0 bytes_invalid=0 send_seq=18545 receive_seq=18545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997945 adj=49997084 sd_pos=829259 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.24 cputime=5680.647 memavail=3263932 print_time=18202.696 buffer_time=2.128 print_stall=0 extruder: target=210 temp=210.3 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64169.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50427998 bytes_read=8166824 bytes_retransmit=9 bytes_invalid=0 send_seq=972830 receive_seq=972830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=111423 bytes_read=345095 bytes_retransmit=0 bytes_invalid=0 send_seq=18546 receive_seq=18546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997946 adj=49997067 sd_pos=829385 heater_bed: target=60 temp=60.0 pwm=0.307 sysload=0.24 cputime=5680.811 memavail=3263932 print_time=18203.675 buffer_time=2.107 print_stall=0 extruder: target=210 temp=210.4 pwm=0.357
Stats 64170.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50431369 bytes_read=8167381 bytes_retransmit=9 bytes_invalid=0 send_seq=972898 receive_seq=972898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111429 bytes_read=345124 bytes_retransmit=0 bytes_invalid=0 send_seq=18547 receive_seq=18547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997950 adj=49997033 sd_pos=829456 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.24 cputime=5681.004 memavail=3263692 print_time=18204.706 buffer_time=2.137 print_stall=0 extruder: target=210 temp=210.5 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64171.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50436441 bytes_read=8168067 bytes_retransmit=9 bytes_invalid=0 send_seq=972992 receive_seq=972992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111435 bytes_read=345140 bytes_retransmit=0 bytes_invalid=0 send_seq=18548 receive_seq=18548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997952 adj=49997090 sd_pos=830224 heater_bed: target=60 temp=60.0 pwm=0.266 sysload=0.24 cputime=5681.164 memavail=3263696 print_time=18205.717 buffer_time=2.147 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
Stats 64172.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50439603 bytes_read=8168599 bytes_retransmit=9 bytes_invalid=0 send_seq=973058 receive_seq=973058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111441 bytes_read=345156 bytes_retransmit=0 bytes_invalid=0 send_seq=18549 receive_seq=18549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997953 adj=49997034 sd_pos=830224 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.24 cputime=5681.350 memavail=3263192 print_time=18206.717 buffer_time=2.147 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64173.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50444726 bytes_read=8169307 bytes_retransmit=9 bytes_invalid=0 send_seq=973153 receive_seq=973153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007798 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111447 bytes_read=345172 bytes_retransmit=0 bytes_invalid=0 send_seq=18550 receive_seq=18550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997956 adj=49997011 sd_pos=830695 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5681.582 memavail=3262968 print_time=18207.946 buffer_time=2.375 print_stall=0 extruder: target=210 temp=210.4 pwm=0.341
Stats 64174.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50448098 bytes_read=8169868 bytes_retransmit=9 bytes_invalid=0 send_seq=973222 receive_seq=973222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=424 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111453 bytes_read=345188 bytes_retransmit=0 bytes_invalid=0 send_seq=18551 receive_seq=18551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997957 adj=49996982 sd_pos=830834 heater_bed: target=60 temp=60.0 pwm=0.023 sysload=0.22 cputime=5681.747 memavail=3262464 print_time=18208.749 buffer_time=2.177 print_stall=0 extruder: target=210 temp=210.2 pwm=0.398
Stats 64175.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50451596 bytes_read=8170390 bytes_retransmit=9 bytes_invalid=0 send_seq=973286 receive_seq=973286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=107 freq=400007804 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111459 bytes_read=345217 bytes_retransmit=0 bytes_invalid=0 send_seq=18552 receive_seq=18552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997957 adj=49997011 sd_pos=830834 heater_bed: target=60 temp=60.0 pwm=0.286 sysload=0.22 cputime=5681.940 memavail=3262468 print_time=18209.749 buffer_time=2.176 print_stall=0 extruder: target=210 temp=210.1 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64176.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50456467 bytes_read=8171067 bytes_retransmit=9 bytes_invalid=0 send_seq=973378 receive_seq=973378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007847 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111465 bytes_read=345233 bytes_retransmit=0 bytes_invalid=0 send_seq=18553 receive_seq=18553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997959 adj=49996985 sd_pos=831533 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.22 cputime=5682.093 memavail=3262720 print_time=18210.743 buffer_time=2.170 print_stall=0 extruder: target=210 temp=209.8 pwm=0.448
Stats 64177.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50459830 bytes_read=8171598 bytes_retransmit=9 bytes_invalid=0 send_seq=973441 receive_seq=973441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007833 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111471 bytes_read=345248 bytes_retransmit=0 bytes_invalid=0 send_seq=18554 receive_seq=18554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997960 adj=49996934 sd_pos=831649 heater_bed: target=60 temp=60.0 pwm=0.282 sysload=0.22 cputime=5682.294 memavail=3263476 print_time=18211.769 buffer_time=2.196 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64178.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50463032 bytes_read=8172113 bytes_retransmit=9 bytes_invalid=0 send_seq=973504 receive_seq=973504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007819 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111477 bytes_read=345262 bytes_retransmit=0 bytes_invalid=0 send_seq=18555 receive_seq=18555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997962 adj=49996981 sd_pos=831881 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.20 cputime=5682.507 memavail=3263476 print_time=18212.671 buffer_time=2.097 print_stall=0 extruder: target=210 temp=209.5 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64179.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50467770 bytes_read=8172798 bytes_retransmit=9 bytes_invalid=0 send_seq=973595 receive_seq=973595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=400007812 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111483 bytes_read=345277 bytes_retransmit=0 bytes_invalid=0 send_seq=18556 receive_seq=18556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997964 adj=49997030 sd_pos=832007 heater_bed: target=60 temp=60.0 pwm=0.372 sysload=0.20 cputime=5682.673 memavail=3263480 print_time=18213.602 buffer_time=2.028 print_stall=0 extruder: target=210 temp=209.4 pwm=0.448
Stats 64180.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50471950 bytes_read=8173424 bytes_retransmit=9 bytes_invalid=0 send_seq=973677 receive_seq=973677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=14 freq=400007806 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111489 bytes_read=345305 bytes_retransmit=0 bytes_invalid=0 send_seq=18557 receive_seq=18557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997965 adj=49997058 sd_pos=832151 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.20 cputime=5682.913 memavail=3263480 print_time=18214.878 buffer_time=2.259 print_stall=0 extruder: target=210 temp=209.4 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64181.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50476406 bytes_read=8174061 bytes_retransmit=9 bytes_invalid=0 send_seq=973764 receive_seq=973764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=400007788 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111495 bytes_read=345320 bytes_retransmit=0 bytes_invalid=0 send_seq=18558 receive_seq=18558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997967 adj=49997063 sd_pos=832917 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.20 cputime=5683.033 memavail=3263480 print_time=18215.675 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.6 pwm=0.411
Stats 64182.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50479562 bytes_read=8174548 bytes_retransmit=9 bytes_invalid=0 send_seq=973818 receive_seq=973818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111501 bytes_read=345335 bytes_retransmit=0 bytes_invalid=0 send_seq=18559 receive_seq=18559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997977 adj=49997108 sd_pos=832917 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.18 cputime=5683.219 memavail=3263480 print_time=18216.676 buffer_time=2.055 print_stall=0 extruder: target=210 temp=209.6 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64183.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50484052 bytes_read=8175215 bytes_retransmit=9 bytes_invalid=0 send_seq=973905 receive_seq=973905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111507 bytes_read=345351 bytes_retransmit=0 bytes_invalid=0 send_seq=18560 receive_seq=18560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997976 adj=49997238 sd_pos=833330 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.18 cputime=5683.458 memavail=3263480 print_time=18217.759 buffer_time=2.138 print_stall=0 extruder: target=210 temp=209.8 pwm=0.411
Stats 64184.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50487580 bytes_read=8175772 bytes_retransmit=9 bytes_invalid=0 send_seq=973976 receive_seq=973976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111513 bytes_read=345367 bytes_retransmit=0 bytes_invalid=0 send_seq=18561 receive_seq=18561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997978 adj=49997227 sd_pos=833330 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.18 cputime=5683.658 memavail=3263480 print_time=18218.652 buffer_time=2.030 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
Stats 64185.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50491000 bytes_read=8176324 bytes_retransmit=9 bytes_invalid=0 send_seq=974043 receive_seq=974043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111519 bytes_read=345396 bytes_retransmit=0 bytes_invalid=0 send_seq=18562 receive_seq=18562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997981 adj=49997166 sd_pos=833473 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.18 cputime=5683.856 memavail=3263480 print_time=18219.676 buffer_time=2.054 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64186.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50496184 bytes_read=8177015 bytes_retransmit=9 bytes_invalid=0 send_seq=974138 receive_seq=974138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007738 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111525 bytes_read=345412 bytes_retransmit=0 bytes_invalid=0 send_seq=18563 receive_seq=18563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997981 adj=49997186 sd_pos=834173 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5684.022 memavail=3263480 print_time=18220.820 buffer_time=2.197 print_stall=0 extruder: target=210 temp=210.3 pwm=0.370
Stats 64187.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50499344 bytes_read=8177542 bytes_retransmit=9 bytes_invalid=0 send_seq=974203 receive_seq=974203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111531 bytes_read=345428 bytes_retransmit=0 bytes_invalid=0 send_seq=18564 receive_seq=18564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997983 adj=49997181 sd_pos=834289 heater_bed: target=60 temp=60.0 pwm=0.279 sysload=0.25 cputime=5684.209 memavail=3262980 print_time=18221.732 buffer_time=2.108 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64188.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50502602 bytes_read=8178105 bytes_retransmit=9 bytes_invalid=0 send_seq=974269 receive_seq=974269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111537 bytes_read=345444 bytes_retransmit=0 bytes_invalid=0 send_seq=18565 receive_seq=18565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997983 adj=49997214 sd_pos=834555 heater_bed: target=60 temp=60.0 pwm=0.034 sysload=0.25 cputime=5684.357 memavail=3262980 print_time=18222.642 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.3 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64189.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50507733 bytes_read=8178802 bytes_retransmit=9 bytes_invalid=0 send_seq=974366 receive_seq=974366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111543 bytes_read=345460 bytes_retransmit=0 bytes_invalid=0 send_seq=18566 receive_seq=18566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997984 adj=49997221 sd_pos=834682 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.25 cputime=5684.604 memavail=3262980 print_time=18223.813 buffer_time=2.187 print_stall=0 extruder: target=210 temp=210.2 pwm=0.371
Stats 64190.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50511604 bytes_read=8179383 bytes_retransmit=9 bytes_invalid=0 send_seq=974442 receive_seq=974442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111549 bytes_read=345489 bytes_retransmit=0 bytes_invalid=0 send_seq=18567 receive_seq=18567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997985 adj=49997197 sd_pos=834825 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.25 cputime=5684.806 memavail=3262980 print_time=18224.863 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.2 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64191.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50516179 bytes_read=8180059 bytes_retransmit=9 bytes_invalid=0 send_seq=974531 receive_seq=974531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111555 bytes_read=345505 bytes_retransmit=0 bytes_invalid=0 send_seq=18568 receive_seq=18568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997986 adj=49997151 sd_pos=835519 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.25 cputime=5684.917 memavail=3262980 print_time=18225.659 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.1 pwm=0.371
Stats 64192.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50519339 bytes_read=8180541 bytes_retransmit=9 bytes_invalid=0 send_seq=974587 receive_seq=974587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111561 bytes_read=345521 bytes_retransmit=0 bytes_invalid=0 send_seq=18569 receive_seq=18569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997988 adj=49997134 sd_pos=835626 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.23 cputime=5685.127 memavail=3263720 print_time=18226.660 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.1 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64193.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50522883 bytes_read=8181103 bytes_retransmit=9 bytes_invalid=0 send_seq=974659 receive_seq=974659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111567 bytes_read=345537 bytes_retransmit=0 bytes_invalid=0 send_seq=18570 receive_seq=18570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997989 adj=49997156 sd_pos=835882 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.23 cputime=5685.307 memavail=3263744 print_time=18227.712 buffer_time=2.066 print_stall=0 extruder: target=210 temp=209.9 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64194.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50527473 bytes_read=8181790 bytes_retransmit=9 bytes_invalid=0 send_seq=974747 receive_seq=974747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111573 bytes_read=345553 bytes_retransmit=0 bytes_invalid=0 send_seq=18571 receive_seq=18571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997989 adj=49997170 sd_pos=836080 heater_bed: target=60 temp=60.0 pwm=0.409 sysload=0.23 cputime=5685.489 memavail=3263744 print_time=18228.692 buffer_time=2.045 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
Stats 64195.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50531160 bytes_read=8182362 bytes_retransmit=9 bytes_invalid=0 send_seq=974821 receive_seq=974821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111579 bytes_read=345582 bytes_retransmit=0 bytes_invalid=0 send_seq=18572 receive_seq=18572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997990 adj=49997163 sd_pos=836153 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.23 cputime=5685.690 memavail=3263744 print_time=18229.702 buffer_time=2.055 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64196.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50536061 bytes_read=8183044 bytes_retransmit=9 bytes_invalid=0 send_seq=974914 receive_seq=974914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=11 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111585 bytes_read=345598 bytes_retransmit=0 bytes_invalid=0 send_seq=18573 receive_seq=18573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997993 adj=49997134 sd_pos=836899 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.23 cputime=5685.830 memavail=3263744 print_time=18230.769 buffer_time=2.121 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
Stats 64197.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50539490 bytes_read=8183605 bytes_retransmit=9 bytes_invalid=0 send_seq=974983 receive_seq=974983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111591 bytes_read=345614 bytes_retransmit=0 bytes_invalid=0 send_seq=18574 receive_seq=18574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997997 adj=49997145 sd_pos=836968 heater_bed: target=60 temp=60.0 pwm=0.267 sysload=0.21 cputime=5686.035 memavail=3263744 print_time=18231.786 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64198.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50544092 bytes_read=8184237 bytes_retransmit=9 bytes_invalid=0 send_seq=975069 receive_seq=975069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111597 bytes_read=345630 bytes_retransmit=0 bytes_invalid=0 send_seq=18575 receive_seq=18575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997999 adj=49997209 sd_pos=837320 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.21 cputime=5686.234 memavail=3263744 print_time=18232.951 buffer_time=2.302 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
Stats 64199.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50547411 bytes_read=8184800 bytes_retransmit=9 bytes_invalid=0 send_seq=975135 receive_seq=975135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=111603 bytes_read=345646 bytes_retransmit=0 bytes_invalid=0 send_seq=18576 receive_seq=18576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997999 adj=49997217 sd_pos=837320 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.21 cputime=5686.404 memavail=3263744 print_time=18233.764 buffer_time=2.115 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
Stats 64200.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50550604 bytes_read=8185326 bytes_retransmit=9 bytes_invalid=0 send_seq=975198 receive_seq=975198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111609 bytes_read=345675 bytes_retransmit=0 bytes_invalid=0 send_seq=18577 receive_seq=18577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998003 adj=49997245 sd_pos=837401 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.21 cputime=5686.599 memavail=3263744 print_time=18234.794 buffer_time=2.144 print_stall=0 extruder: target=210 temp=209.7 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64201.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50555987 bytes_read=8186033 bytes_retransmit=9 bytes_invalid=0 send_seq=975299 receive_seq=975299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=270 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111615 bytes_read=345691 bytes_retransmit=0 bytes_invalid=0 send_seq=18578 receive_seq=18578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998004 adj=49997282 sd_pos=838172 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.21 cputime=5686.737 memavail=3263492 print_time=18235.807 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.8 pwm=0.386
Stats 64202.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50559185 bytes_read=8186575 bytes_retransmit=9 bytes_invalid=0 send_seq=975364 receive_seq=975364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=285 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111621 bytes_read=345707 bytes_retransmit=0 bytes_invalid=0 send_seq=18579 receive_seq=18579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998006 adj=49997272 sd_pos=838283 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.27 cputime=5686.942 memavail=3263492 print_time=18236.808 buffer_time=2.157 print_stall=0 extruder: target=210 temp=210.0 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64203.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50564317 bytes_read=8187287 bytes_retransmit=9 bytes_invalid=0 send_seq=975461 receive_seq=975461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111633 bytes_read=345739 bytes_retransmit=0 bytes_invalid=0 send_seq=18581 receive_seq=18581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998009 adj=49997187 sd_pos=838642 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.27 cputime=5687.135 memavail=3263492 print_time=18238.035 buffer_time=2.384 print_stall=0 extruder: target=210 temp=210.2 pwm=0.386
Stats 64204.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50567650 bytes_read=8187830 bytes_retransmit=9 bytes_invalid=0 send_seq=975526 receive_seq=975526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111639 bytes_read=345755 bytes_retransmit=0 bytes_invalid=0 send_seq=18582 receive_seq=18582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998012 adj=49997201 sd_pos=838642 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.27 cputime=5687.312 memavail=3263492 print_time=18238.780 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.3 pwm=0.386
Stats 64205.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50570625 bytes_read=8188347 bytes_retransmit=9 bytes_invalid=0 send_seq=975586 receive_seq=975586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=111645 bytes_read=345784 bytes_retransmit=0 bytes_invalid=0 send_seq=18583 receive_seq=18583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998013 adj=49997226 sd_pos=838713 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.27 cputime=5687.498 memavail=3263492 print_time=18239.696 buffer_time=2.043 print_stall=0 extruder: target=210 temp=210.4 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64206.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50576180 bytes_read=8189088 bytes_retransmit=9 bytes_invalid=0 send_seq=975691 receive_seq=975691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=316 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=111651 bytes_read=345800 bytes_retransmit=0 bytes_invalid=0 send_seq=18584 receive_seq=18584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998016 adj=49997228 sd_pos=839478 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.27 cputime=5687.657 memavail=3263500 print_time=18240.820 buffer_time=2.167 print_stall=0 extruder: target=210 temp=210.5 pwm=0.345
Stats 64207.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50579399 bytes_read=8189615 bytes_retransmit=9 bytes_invalid=0 send_seq=975756 receive_seq=975756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=442 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=111657 bytes_read=345816 bytes_retransmit=0 bytes_invalid=0 send_seq=18585 receive_seq=18585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998016 adj=49997200 sd_pos=839593 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.33 cputime=5687.870 memavail=3263756 print_time=18241.841 buffer_time=2.187 print_stall=0 extruder: target=210 temp=210.5 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64208.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50584321 bytes_read=8190292 bytes_retransmit=9 bytes_invalid=0 send_seq=975848 receive_seq=975848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=111663 bytes_read=345832 bytes_retransmit=0 bytes_invalid=0 send_seq=18586 receive_seq=18586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998018 adj=49997201 sd_pos=839984 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.33 cputime=5688.060 memavail=3263756 print_time=18242.953 buffer_time=2.298 print_stall=0 extruder: target=210 temp=210.5 pwm=0.345
Stats 64209.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50588302 bytes_read=8190919 bytes_retransmit=9 bytes_invalid=0 send_seq=975927 receive_seq=975927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=111669 bytes_read=345848 bytes_retransmit=0 bytes_invalid=0 send_seq=18587 receive_seq=18587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998020 adj=49997205 sd_pos=840083 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.33 cputime=5688.266 memavail=3263756 print_time=18243.868 buffer_time=2.175 print_stall=0 extruder: target=210 temp=210.3 pwm=0.395
Stats 64210.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50591428 bytes_read=8191444 bytes_retransmit=9 bytes_invalid=0 send_seq=975992 receive_seq=975992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111675 bytes_read=345877 bytes_retransmit=0 bytes_invalid=0 send_seq=18588 receive_seq=18588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998023 adj=49997214 sd_pos=840083 heater_bed: target=60 temp=60.0 pwm=0.276 sysload=0.33 cputime=5688.450 memavail=3263756 print_time=18244.868 buffer_time=2.174 print_stall=0 extruder: target=210 temp=210.2 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64211.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50596421 bytes_read=8192128 bytes_retransmit=9 bytes_invalid=0 send_seq=976086 receive_seq=976086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111681 bytes_read=345893 bytes_retransmit=0 bytes_invalid=0 send_seq=18589 receive_seq=18589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998023 adj=49997228 sd_pos=840807 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.33 cputime=5688.581 memavail=3263756 print_time=18245.799 buffer_time=2.104 print_stall=0 extruder: target=210 temp=210.1 pwm=0.395
Stats 64212.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50599629 bytes_read=8192664 bytes_retransmit=9 bytes_invalid=0 send_seq=976150 receive_seq=976150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111687 bytes_read=345909 bytes_retransmit=0 bytes_invalid=0 send_seq=18590 receive_seq=18590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998026 adj=49997213 sd_pos=840807 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.31 cputime=5688.771 memavail=3263756 print_time=18246.799 buffer_time=2.103 print_stall=0 extruder: target=210 temp=209.9 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64213.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50603749 bytes_read=8193266 bytes_retransmit=9 bytes_invalid=0 send_seq=976230 receive_seq=976230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111693 bytes_read=345925 bytes_retransmit=0 bytes_invalid=0 send_seq=18591 receive_seq=18591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998027 adj=49997224 sd_pos=841160 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.31 cputime=5688.965 memavail=3263504 print_time=18247.880 buffer_time=2.183 print_stall=0 extruder: target=210 temp=209.8 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64214.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50608272 bytes_read=8193939 bytes_retransmit=9 bytes_invalid=0 send_seq=976318 receive_seq=976318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=579 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111699 bytes_read=345941 bytes_retransmit=0 bytes_invalid=0 send_seq=18592 receive_seq=18592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998028 adj=49997213 sd_pos=841358 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.31 cputime=5689.146 memavail=3263508 print_time=18248.883 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.7 pwm=0.428
Stats 64215.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50611885 bytes_read=8194515 bytes_retransmit=9 bytes_invalid=0 send_seq=976390 receive_seq=976390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=173 freq=400007582 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111705 bytes_read=345970 bytes_retransmit=0 bytes_invalid=0 send_seq=18593 receive_seq=18593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998030 adj=49997206 sd_pos=841358 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.31 cputime=5689.384 memavail=3263508 print_time=18249.883 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64216.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50617301 bytes_read=8195217 bytes_retransmit=9 bytes_invalid=0 send_seq=976490 receive_seq=976490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=14 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111711 bytes_read=345986 bytes_retransmit=0 bytes_invalid=0 send_seq=18594 receive_seq=18594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998032 adj=49997218 sd_pos=842153 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.31 cputime=5689.527 memavail=3263512 print_time=18250.887 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
Stats 64217.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50620516 bytes_read=8195764 bytes_retransmit=9 bytes_invalid=0 send_seq=976556 receive_seq=976556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111717 bytes_read=346002 bytes_retransmit=0 bytes_invalid=0 send_seq=18595 receive_seq=18595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998034 adj=49997156 sd_pos=842219 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.28 cputime=5689.726 memavail=3263260 print_time=18251.887 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.7 pwm=0.412
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64218.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50624978 bytes_read=8196415 bytes_retransmit=9 bytes_invalid=0 send_seq=976643 receive_seq=976643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111723 bytes_read=346018 bytes_retransmit=0 bytes_invalid=0 send_seq=18596 receive_seq=18596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998036 adj=49997163 sd_pos=842575 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.28 cputime=5689.909 memavail=3263260 print_time=18253.006 buffer_time=2.307 print_stall=0 extruder: target=210 temp=209.8 pwm=0.412
Stats 64219.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50628759 bytes_read=8197013 bytes_retransmit=9 bytes_invalid=0 send_seq=976719 receive_seq=976719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=111729 bytes_read=346034 bytes_retransmit=0 bytes_invalid=0 send_seq=18597 receive_seq=18597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998039 adj=49997165 sd_pos=842647 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.28 cputime=5690.077 memavail=3263260 print_time=18253.877 buffer_time=2.178 print_stall=0 extruder: target=210 temp=209.9 pwm=0.412
Stats 64220.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50631784 bytes_read=8197550 bytes_retransmit=9 bytes_invalid=0 send_seq=976783 receive_seq=976783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111735 bytes_read=346063 bytes_retransmit=0 bytes_invalid=0 send_seq=18598 receive_seq=18598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998041 adj=49997196 sd_pos=842647 heater_bed: target=60 temp=60.0 pwm=0.230 sysload=0.28 cputime=5690.299 memavail=3263260 print_time=18254.878 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.0 pwm=0.412
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64221.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50636899 bytes_read=8198247 bytes_retransmit=9 bytes_invalid=0 send_seq=976880 receive_seq=976880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111741 bytes_read=346079 bytes_retransmit=0 bytes_invalid=0 send_seq=18599 receive_seq=18599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998043 adj=49997204 sd_pos=843410 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.28 cputime=5690.434 memavail=3263260 print_time=18255.851 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.1 pwm=0.366
Stats 64222.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50640014 bytes_read=8198779 bytes_retransmit=9 bytes_invalid=0 send_seq=976946 receive_seq=976946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111747 bytes_read=346095 bytes_retransmit=0 bytes_invalid=0 send_seq=18600 receive_seq=18600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998047 adj=49997218 sd_pos=843410 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.34 cputime=5690.620 memavail=3263264 print_time=18256.851 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64223.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50643775 bytes_read=8199367 bytes_retransmit=9 bytes_invalid=0 send_seq=977017 receive_seq=977017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111753 bytes_read=346111 bytes_retransmit=0 bytes_invalid=0 send_seq=18601 receive_seq=18601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998050 adj=49997260 sd_pos=843759 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.34 cputime=5690.806 memavail=3263264 print_time=18257.909 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.4 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64224.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50648472 bytes_read=8200023 bytes_retransmit=9 bytes_invalid=0 send_seq=977105 receive_seq=977105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=150 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111759 bytes_read=346127 bytes_retransmit=0 bytes_invalid=0 send_seq=18602 receive_seq=18602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998053 adj=49997268 sd_pos=843954 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.34 cputime=5690.976 memavail=3263264 print_time=18258.902 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
Stats 64225.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50651830 bytes_read=8200565 bytes_retransmit=9 bytes_invalid=0 send_seq=977173 receive_seq=977173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111765 bytes_read=346156 bytes_retransmit=0 bytes_invalid=0 send_seq=18603 receive_seq=18603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998064 adj=49997273 sd_pos=843954 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.34 cputime=5691.208 memavail=3263264 print_time=18259.902 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.4 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64226.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50657097 bytes_read=8201277 bytes_retransmit=9 bytes_invalid=0 send_seq=977272 receive_seq=977272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=31 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111771 bytes_read=346172 bytes_retransmit=0 bytes_invalid=0 send_seq=18604 receive_seq=18604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998067 adj=49997340 sd_pos=844719 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.34 cputime=5691.361 memavail=3263264 print_time=18261.013 buffer_time=2.310 print_stall=0 extruder: target=210 temp=210.4 pwm=0.364
Stats 64227.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50659543 bytes_read=8201758 bytes_retransmit=9 bytes_invalid=0 send_seq=977325 receive_seq=977325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111777 bytes_read=346188 bytes_retransmit=0 bytes_invalid=0 send_seq=18605 receive_seq=18605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998069 adj=49997304 sd_pos=844719 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.39 cputime=5691.504 memavail=3263016 print_time=18261.764 buffer_time=2.059 print_stall=0 extruder: target=210 temp=210.3 pwm=0.364
Stats 64228.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50663155 bytes_read=8202336 bytes_retransmit=9 bytes_invalid=0 send_seq=977397 receive_seq=977397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111783 bytes_read=346204 bytes_retransmit=0 bytes_invalid=0 send_seq=18606 receive_seq=18606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998071 adj=49997340 sd_pos=844835 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.39 cputime=5691.707 memavail=3263016 print_time=18262.788 buffer_time=2.083 print_stall=0 extruder: target=210 temp=210.2 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64229.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50667834 bytes_read=8202983 bytes_retransmit=9 bytes_invalid=0 send_seq=977483 receive_seq=977483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111789 bytes_read=346220 bytes_retransmit=0 bytes_invalid=0 send_seq=18607 receive_seq=18607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998074 adj=49997330 sd_pos=845230 heater_bed: target=60 temp=60.0 pwm=0.277 sysload=0.39 cputime=5691.857 memavail=3263016 print_time=18263.765 buffer_time=2.059 print_stall=0 extruder: target=210 temp=210.1 pwm=0.364
Stats 64230.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50671440 bytes_read=8203529 bytes_retransmit=9 bytes_invalid=0 send_seq=977549 receive_seq=977549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111795 bytes_read=346236 bytes_retransmit=0 bytes_invalid=0 send_seq=18608 receive_seq=18608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998077 adj=49997331 sd_pos=845374 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.39 cputime=5692.088 memavail=3263016 print_time=18264.798 buffer_time=2.092 print_stall=0 extruder: target=210 temp=209.9 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64231.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50675402 bytes_read=8204126 bytes_retransmit=9 bytes_invalid=0 send_seq=977628 receive_seq=977628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111801 bytes_read=346265 bytes_retransmit=0 bytes_invalid=0 send_seq=18609 receive_seq=18609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998078 adj=49997321 sd_pos=846102 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.39 cputime=5692.234 memavail=3263016 print_time=18265.781 buffer_time=2.074 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
Stats 64232.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50679402 bytes_read=8204738 bytes_retransmit=9 bytes_invalid=0 send_seq=977708 receive_seq=977708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111807 bytes_read=346281 bytes_retransmit=0 bytes_invalid=0 send_seq=18610 receive_seq=18610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998080 adj=49997296 sd_pos=846102 heater_bed: target=60 temp=60.0 pwm=0.020 sysload=0.44 cputime=5692.419 memavail=3262260 print_time=18266.796 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.7 pwm=0.390
Stats 64233.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50682592 bytes_read=8205300 bytes_retransmit=9 bytes_invalid=0 send_seq=977774 receive_seq=977774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111813 bytes_read=346297 bytes_retransmit=0 bytes_invalid=0 send_seq=18611 receive_seq=18611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998080 adj=49997285 sd_pos=846148 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.44 cputime=5692.609 memavail=3262260 print_time=18267.797 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.6 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64234.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50687230 bytes_read=8205947 bytes_retransmit=9 bytes_invalid=0 send_seq=977863 receive_seq=977863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111819 bytes_read=346313 bytes_retransmit=0 bytes_invalid=0 send_seq=18612 receive_seq=18612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998082 adj=49997194 sd_pos=846501 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.44 cputime=5692.752 memavail=3261004 print_time=18268.768 buffer_time=2.059 print_stall=0 extruder: target=210 temp=209.5 pwm=0.452
Stats 64235.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50690506 bytes_read=8206499 bytes_retransmit=9 bytes_invalid=0 send_seq=977930 receive_seq=977930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111825 bytes_read=346329 bytes_retransmit=0 bytes_invalid=0 send_seq=18613 receive_seq=18613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998084 adj=49997199 sd_pos=846590 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.44 cputime=5692.949 memavail=3261004 print_time=18269.769 buffer_time=2.059 print_stall=0 extruder: target=210 temp=209.4 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64236.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50694862 bytes_read=8207145 bytes_retransmit=9 bytes_invalid=0 send_seq=978016 receive_seq=978016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111831 bytes_read=346358 bytes_retransmit=0 bytes_invalid=0 send_seq=18614 receive_seq=18614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998085 adj=49997199 sd_pos=847296 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.44 cputime=5693.133 memavail=3261004 print_time=18270.766 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.4 pwm=0.452
Stats 64237.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50698960 bytes_read=8207752 bytes_retransmit=9 bytes_invalid=0 send_seq=978097 receive_seq=978097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111837 bytes_read=346374 bytes_retransmit=0 bytes_invalid=0 send_seq=18615 receive_seq=18615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998088 adj=49997223 sd_pos=847369 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.41 cputime=5693.330 memavail=3261008 print_time=18271.767 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.6 pwm=0.425
Stats 64238.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50702393 bytes_read=8208314 bytes_retransmit=9 bytes_invalid=0 send_seq=978166 receive_seq=978166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111843 bytes_read=346390 bytes_retransmit=0 bytes_invalid=0 send_seq=18616 receive_seq=18616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998089 adj=49997237 sd_pos=847439 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.41 cputime=5693.527 memavail=3261008 print_time=18272.797 buffer_time=2.086 print_stall=0 extruder: target=210 temp=209.7 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64239.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50707434 bytes_read=8209026 bytes_retransmit=9 bytes_invalid=0 send_seq=978262 receive_seq=978262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111849 bytes_read=346406 bytes_retransmit=0 bytes_invalid=0 send_seq=18617 receive_seq=18617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998091 adj=49997221 sd_pos=847799 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.41 cputime=5693.674 memavail=3261008 print_time=18273.785 buffer_time=2.072 print_stall=0 extruder: target=210 temp=209.8 pwm=0.425
Stats 64240.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50710606 bytes_read=8209558 bytes_retransmit=9 bytes_invalid=0 send_seq=978328 receive_seq=978328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111855 bytes_read=346422 bytes_retransmit=0 bytes_invalid=0 send_seq=18618 receive_seq=18618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998092 adj=49997206 sd_pos=847799 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.41 cputime=5693.860 memavail=3261008 print_time=18274.785 buffer_time=2.071 print_stall=0 extruder: target=210 temp=210.1 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64241.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50715031 bytes_read=8210205 bytes_retransmit=9 bytes_invalid=0 send_seq=978414 receive_seq=978414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111861 bytes_read=346451 bytes_retransmit=0 bytes_invalid=0 send_seq=18619 receive_seq=18619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998097 adj=49997236 sd_pos=848624 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.41 cputime=5694.099 memavail=3261008 print_time=18275.788 buffer_time=2.073 print_stall=0 extruder: target=210 temp=210.2 pwm=0.359
Stats 64242.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50719220 bytes_read=8210835 bytes_retransmit=9 bytes_invalid=0 send_seq=978497 receive_seq=978497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111867 bytes_read=346467 bytes_retransmit=0 bytes_invalid=0 send_seq=18620 receive_seq=18620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998096 adj=49997255 sd_pos=848697 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.37 cputime=5694.302 memavail=3261008 print_time=18276.811 buffer_time=2.095 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
Stats 64243.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50722408 bytes_read=8211357 bytes_retransmit=9 bytes_invalid=0 send_seq=978562 receive_seq=978562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111873 bytes_read=346483 bytes_retransmit=0 bytes_invalid=0 send_seq=18621 receive_seq=18621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998096 adj=49997235 sd_pos=848755 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.37 cputime=5694.489 memavail=3261008 print_time=18277.811 buffer_time=2.095 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64244.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50727457 bytes_read=8212055 bytes_retransmit=9 bytes_invalid=0 send_seq=978655 receive_seq=978655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111879 bytes_read=346499 bytes_retransmit=0 bytes_invalid=0 send_seq=18622 receive_seq=18622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998096 adj=49997221 sd_pos=849136 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.37 cputime=5694.626 memavail=3260256 print_time=18278.793 buffer_time=2.076 print_stall=0 extruder: target=210 temp=210.6 pwm=0.346
Stats 64245.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50730554 bytes_read=8212591 bytes_retransmit=9 bytes_invalid=0 send_seq=978719 receive_seq=978719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111885 bytes_read=346515 bytes_retransmit=0 bytes_invalid=0 send_seq=18623 receive_seq=18623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998096 adj=49997226 sd_pos=849225 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.37 cputime=5694.824 memavail=3260260 print_time=18279.794 buffer_time=2.076 print_stall=0 extruder: target=210 temp=210.5 pwm=0.346
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64246.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50736120 bytes_read=8213313 bytes_retransmit=9 bytes_invalid=0 send_seq=978823 receive_seq=978823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=146 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111891 bytes_read=346544 bytes_retransmit=0 bytes_invalid=0 send_seq=18624 receive_seq=18624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998099 adj=49997214 sd_pos=849965 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.37 cputime=5695.046 memavail=3260260 print_time=18281.043 buffer_time=2.316 print_stall=0 extruder: target=210 temp=210.5 pwm=0.346
Stats 64247.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50738955 bytes_read=8213839 bytes_retransmit=9 bytes_invalid=0 send_seq=978882 receive_seq=978882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111897 bytes_read=346560 bytes_retransmit=0 bytes_invalid=0 send_seq=18625 receive_seq=18625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998101 adj=49997216 sd_pos=850035 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.34 cputime=5695.245 memavail=3259760 print_time=18281.814 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.3 pwm=0.398
Stats 64248.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50742058 bytes_read=8214361 bytes_retransmit=9 bytes_invalid=0 send_seq=978946 receive_seq=978946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111903 bytes_read=346576 bytes_retransmit=0 bytes_invalid=0 send_seq=18626 receive_seq=18626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998103 adj=49997231 sd_pos=850035 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.34 cputime=5695.430 memavail=3259760 print_time=18282.815 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.2 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64249.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50746918 bytes_read=8215049 bytes_retransmit=9 bytes_invalid=0 send_seq=979040 receive_seq=979040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111909 bytes_read=346592 bytes_retransmit=0 bytes_invalid=0 send_seq=18627 receive_seq=18627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998103 adj=49997231 sd_pos=850433 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.34 cputime=5695.576 memavail=3259760 print_time=18283.790 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.9 pwm=0.398
Stats 64250.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50750054 bytes_read=8215605 bytes_retransmit=9 bytes_invalid=0 send_seq=979105 receive_seq=979105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111915 bytes_read=346608 bytes_retransmit=0 bytes_invalid=0 send_seq=18628 receive_seq=18628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998105 adj=49997222 sd_pos=850476 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.34 cputime=5695.776 memavail=3259760 print_time=18284.791 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64251.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50755756 bytes_read=8216297 bytes_retransmit=9 bytes_invalid=0 send_seq=979213 receive_seq=979203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111921 bytes_read=346637 bytes_retransmit=0 bytes_invalid=0 send_seq=18629 receive_seq=18629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998107 adj=49997180 sd_pos=851174 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.34 cputime=5695.966 memavail=3259760 print_time=18286.045 buffer_time=2.290 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
Stats 64252.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50758967 bytes_read=8216894 bytes_retransmit=9 bytes_invalid=0 send_seq=979279 receive_seq=979279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=188 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111927 bytes_read=346653 bytes_retransmit=0 bytes_invalid=0 send_seq=18630 receive_seq=18630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998108 adj=49997161 sd_pos=851290 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.31 cputime=5696.220 memavail=3259760 print_time=18287.066 buffer_time=2.309 print_stall=0 extruder: target=210 temp=209.5 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64253.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50761971 bytes_read=8217372 bytes_retransmit=9 bytes_invalid=0 send_seq=979332 receive_seq=979332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111933 bytes_read=346669 bytes_retransmit=0 bytes_invalid=0 send_seq=18631 receive_seq=18631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998110 adj=49997203 sd_pos=851434 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.31 cputime=5696.373 memavail=3259760 print_time=18287.945 buffer_time=2.188 print_stall=0 extruder: target=210 temp=209.4 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64254.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50766290 bytes_read=8218007 bytes_retransmit=9 bytes_invalid=0 send_seq=979416 receive_seq=979416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111939 bytes_read=346685 bytes_retransmit=0 bytes_invalid=0 send_seq=18632 receive_seq=18632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998111 adj=49997224 sd_pos=851649 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.31 cputime=5696.517 memavail=3259760 print_time=18288.795 buffer_time=2.038 print_stall=0 extruder: target=210 temp=209.4 pwm=0.448
Stats 64255.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50769920 bytes_read=8218584 bytes_retransmit=9 bytes_invalid=0 send_seq=979488 receive_seq=979488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111945 bytes_read=346701 bytes_retransmit=0 bytes_invalid=0 send_seq=18633 receive_seq=18633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998114 adj=49997240 sd_pos=851737 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.31 cputime=5696.719 memavail=3259760 print_time=18289.803 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.5 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64256.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50775154 bytes_read=8219290 bytes_retransmit=9 bytes_invalid=0 send_seq=979586 receive_seq=979586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=309 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111951 bytes_read=346730 bytes_retransmit=0 bytes_invalid=0 send_seq=18634 receive_seq=18634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998116 adj=49997254 sd_pos=852440 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.31 cputime=5696.885 memavail=3259760 print_time=18290.892 buffer_time=2.133 print_stall=0 extruder: target=210 temp=209.6 pwm=0.422
Stats 64257.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50778704 bytes_read=8219837 bytes_retransmit=9 bytes_invalid=0 send_seq=979655 receive_seq=979655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111957 bytes_read=346746 bytes_retransmit=0 bytes_invalid=0 send_seq=18635 receive_seq=18635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998116 adj=49997245 sd_pos=852440 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.29 cputime=5697.135 memavail=3260648 print_time=18291.892 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.7 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64258.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50783633 bytes_read=8220529 bytes_retransmit=9 bytes_invalid=0 send_seq=979750 receive_seq=979750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111963 bytes_read=346762 bytes_retransmit=0 bytes_invalid=0 send_seq=18636 receive_seq=18636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998119 adj=49997181 sd_pos=852881 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.29 cputime=5697.324 memavail=3260780 print_time=18293.113 buffer_time=2.353 print_stall=0 extruder: target=210 temp=209.9 pwm=0.422
Stats 64259.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50786816 bytes_read=8221091 bytes_retransmit=9 bytes_invalid=0 send_seq=979816 receive_seq=979816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111969 bytes_read=346778 bytes_retransmit=0 bytes_invalid=0 send_seq=18637 receive_seq=18637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998122 adj=49997202 sd_pos=852910 heater_bed: target=60 temp=59.9 pwm=0.340 sysload=0.29 cputime=5697.472 memavail=3260780 print_time=18293.864 buffer_time=2.102 print_stall=0 extruder: target=210 temp=210.1 pwm=0.366
Stats 64260.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50790234 bytes_read=8221643 bytes_retransmit=9 bytes_invalid=0 send_seq=979886 receive_seq=979886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111975 bytes_read=346794 bytes_retransmit=0 bytes_invalid=0 send_seq=18638 receive_seq=18638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998124 adj=49997265 sd_pos=852996 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.29 cputime=5697.671 memavail=3260780 print_time=18294.868 buffer_time=2.105 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64261.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50795499 bytes_read=8222360 bytes_retransmit=9 bytes_invalid=0 send_seq=979986 receive_seq=979986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111981 bytes_read=346823 bytes_retransmit=0 bytes_invalid=0 send_seq=18639 receive_seq=18639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998125 adj=49997294 sd_pos=853701 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5697.823 memavail=3260780 print_time=18295.870 buffer_time=2.106 print_stall=0 extruder: target=210 temp=210.4 pwm=0.366
Stats 64262.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50798530 bytes_read=8222896 bytes_retransmit=9 bytes_invalid=0 send_seq=980050 receive_seq=980050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111987 bytes_read=346839 bytes_retransmit=0 bytes_invalid=0 send_seq=18640 receive_seq=18640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998126 adj=49997290 sd_pos=853701 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.35 cputime=5698.010 memavail=3260780 print_time=18296.870 buffer_time=2.106 print_stall=0 extruder: target=210 temp=210.4 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64263.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50802368 bytes_read=8223483 bytes_retransmit=9 bytes_invalid=0 send_seq=980127 receive_seq=980127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111993 bytes_read=346854 bytes_retransmit=0 bytes_invalid=0 send_seq=18641 receive_seq=18641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998126 adj=49997294 sd_pos=854090 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.35 cputime=5698.230 memavail=3260780 print_time=18297.923 buffer_time=2.158 print_stall=0 extruder: target=210 temp=210.5 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64264.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50807112 bytes_read=8224161 bytes_retransmit=9 bytes_invalid=0 send_seq=980217 receive_seq=980217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=129 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111999 bytes_read=346869 bytes_retransmit=0 bytes_invalid=0 send_seq=18642 receive_seq=18642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998127 adj=49997280 sd_pos=854275 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.35 cputime=5698.405 memavail=3260780 print_time=18298.873 buffer_time=2.107 print_stall=0 extruder: target=210 temp=210.5 pwm=0.339
Stats 64265.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50810484 bytes_read=8224721 bytes_retransmit=9 bytes_invalid=0 send_seq=980286 receive_seq=980286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112005 bytes_read=346884 bytes_retransmit=0 bytes_invalid=0 send_seq=18643 receive_seq=18643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998129 adj=49997274 sd_pos=854275 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.35 cputime=5698.597 memavail=3260780 print_time=18299.873 buffer_time=2.106 print_stall=0 extruder: target=210 temp=210.4 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64266.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50815173 bytes_read=8225378 bytes_retransmit=9 bytes_invalid=0 send_seq=980377 receive_seq=980377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112011 bytes_read=346912 bytes_retransmit=0 bytes_invalid=0 send_seq=18644 receive_seq=18644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998130 adj=49997286 sd_pos=855049 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.35 cputime=5698.749 memavail=3260780 print_time=18300.867 buffer_time=2.099 print_stall=0 extruder: target=210 temp=210.2 pwm=0.405
Stats 64267.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50818670 bytes_read=8225945 bytes_retransmit=9 bytes_invalid=0 send_seq=980447 receive_seq=980447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112017 bytes_read=346927 bytes_retransmit=0 bytes_invalid=0 send_seq=18645 receive_seq=18645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998131 adj=49997260 sd_pos=855119 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.40 cputime=5698.951 memavail=3261284 print_time=18301.897 buffer_time=2.129 print_stall=0 extruder: target=210 temp=210.1 pwm=0.405
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64268.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50822033 bytes_read=8226506 bytes_retransmit=9 bytes_invalid=0 send_seq=980516 receive_seq=980516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112023 bytes_read=346943 bytes_retransmit=0 bytes_invalid=0 send_seq=18646 receive_seq=18646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998139 adj=49997271 sd_pos=855351 heater_bed: target=60 temp=60.0 pwm=0.029 sysload=0.40 cputime=5699.161 memavail=3261284 print_time=18302.835 buffer_time=2.067 print_stall=0 extruder: target=210 temp=209.8 pwm=0.405
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64269.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50826479 bytes_read=8227159 bytes_retransmit=9 bytes_invalid=0 send_seq=980603 receive_seq=980603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112029 bytes_read=346959 bytes_retransmit=0 bytes_invalid=0 send_seq=18647 receive_seq=18647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998139 adj=49997357 sd_pos=855479 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.40 cputime=5699.318 memavail=3261284 print_time=18303.816 buffer_time=2.047 print_stall=0 extruder: target=210 temp=209.6 pwm=0.456
Stats 64270.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50830089 bytes_read=8227736 bytes_retransmit=9 bytes_invalid=0 send_seq=980675 receive_seq=980675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112035 bytes_read=346975 bytes_retransmit=0 bytes_invalid=0 send_seq=18648 receive_seq=18648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998140 adj=49997351 sd_pos=855565 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.40 cputime=5699.522 memavail=3261284 print_time=18304.834 buffer_time=2.064 print_stall=0 extruder: target=210 temp=209.6 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64271.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50834978 bytes_read=8228412 bytes_retransmit=9 bytes_invalid=0 send_seq=980767 receive_seq=980767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=112041 bytes_read=347004 bytes_retransmit=0 bytes_invalid=0 send_seq=18649 receive_seq=18649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998141 adj=49997333 sd_pos=856297 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.40 cputime=5699.667 memavail=3261280 print_time=18305.889 buffer_time=2.118 print_stall=0 extruder: target=210 temp=209.5 pwm=0.456
Stats 64272.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50838385 bytes_read=8228959 bytes_retransmit=9 bytes_invalid=0 send_seq=980836 receive_seq=980836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=112047 bytes_read=347020 bytes_retransmit=0 bytes_invalid=0 send_seq=18650 receive_seq=18650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998143 adj=49997151 sd_pos=856412 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.37 cputime=5699.873 memavail=3261280 print_time=18306.919 buffer_time=2.148 print_stall=0 extruder: target=210 temp=209.5 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64273.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=50841958 bytes_read=8229536 bytes_retransmit=9 bytes_invalid=0 send_seq=980908 receive_seq=980908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007812 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=112053 bytes_read=347036 bytes_retransmit=0 bytes_invalid=0 send_seq=18651 receive_seq=18651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998144 adj=49997205 sd_pos=856639 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.37 cputime=5700.088 memavail=3260528 print_time=18307.970 buffer_time=2.198 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64274.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50846772 bytes_read=8230233 bytes_retransmit=9 bytes_invalid=0 send_seq=981001 receive_seq=981001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007862 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=112059 bytes_read=347052 bytes_retransmit=0 bytes_invalid=0 send_seq=18652 receive_seq=18652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998145 adj=49997090 sd_pos=856766 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.37 cputime=5700.252 memavail=3260528 print_time=18308.907 buffer_time=2.135 print_stall=0 extruder: target=210 temp=209.9 pwm=0.420
Stats 64275.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50849862 bytes_read=8230756 bytes_retransmit=9 bytes_invalid=0 send_seq=981066 receive_seq=981066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007832 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000019 bytes_write=112065 bytes_read=347068 bytes_retransmit=0 bytes_invalid=0 send_seq=18653 receive_seq=18653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998145 adj=49997026 sd_pos=856811 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.37 cputime=5700.440 memavail=3260528 print_time=18309.907 buffer_time=2.134 print_stall=0 extruder: target=210 temp=210.0 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64276.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50854751 bytes_read=8231438 bytes_retransmit=9 bytes_invalid=0 send_seq=981159 receive_seq=981159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=400007885 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112071 bytes_read=347097 bytes_retransmit=0 bytes_invalid=0 send_seq=18654 receive_seq=18654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998145 adj=49997103 sd_pos=857551 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.37 cputime=5700.606 memavail=3260528 print_time=18310.912 buffer_time=2.138 print_stall=0 extruder: target=210 temp=210.1 pwm=0.369
Stats 64277.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50857895 bytes_read=8231979 bytes_retransmit=9 bytes_invalid=0 send_seq=981224 receive_seq=981224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007934 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112077 bytes_read=347113 bytes_retransmit=0 bytes_invalid=0 send_seq=18655 receive_seq=18655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998145 adj=49997031 sd_pos=857551 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.34 cputime=5700.788 memavail=3261288 print_time=18311.912 buffer_time=2.138 print_stall=0 extruder: target=210 temp=210.4 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64278.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50861990 bytes_read=8232586 bytes_retransmit=9 bytes_invalid=0 send_seq=981305 receive_seq=981305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007970 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112083 bytes_read=347129 bytes_retransmit=0 bytes_invalid=0 send_seq=18656 receive_seq=18656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998146 adj=49996979 sd_pos=858023 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.34 cputime=5701.033 memavail=3261288 print_time=18312.970 buffer_time=2.195 print_stall=0 extruder: target=210 temp=210.6 pwm=0.369
Stats 64279.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50865778 bytes_read=8233220 bytes_retransmit=9 bytes_invalid=0 send_seq=981383 receive_seq=981383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007888 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112095 bytes_read=347161 bytes_retransmit=0 bytes_invalid=0 send_seq=18658 receive_seq=18658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998150 adj=49996968 sd_pos=858023 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.34 cputime=5701.186 memavail=3261288 print_time=18313.902 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.7 pwm=0.313
Stats 64280.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50868915 bytes_read=8233731 bytes_retransmit=9 bytes_invalid=0 send_seq=981442 receive_seq=981442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007854 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112101 bytes_read=347177 bytes_retransmit=0 bytes_invalid=0 send_seq=18659 receive_seq=18659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998151 adj=49997177 sd_pos=858111 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.34 cputime=5701.376 memavail=3261288 print_time=18314.902 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.7 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64281.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50874239 bytes_read=8234443 bytes_retransmit=9 bytes_invalid=0 send_seq=981544 receive_seq=981544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007821 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112107 bytes_read=347206 bytes_retransmit=0 bytes_invalid=0 send_seq=18660 receive_seq=18660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998152 adj=49997245 sd_pos=858855 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.34 cputime=5701.535 memavail=3261288 print_time=18316.002 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.6 pwm=0.365
Stats 64282.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50877546 bytes_read=8234980 bytes_retransmit=9 bytes_invalid=0 send_seq=981608 receive_seq=981608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007794 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112113 bytes_read=347222 bytes_retransmit=0 bytes_invalid=0 send_seq=18661 receive_seq=18661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998154 adj=49997287 sd_pos=858925 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.31 cputime=5701.740 memavail=3261288 print_time=18317.023 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.4 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64283.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50881888 bytes_read=8235632 bytes_retransmit=9 bytes_invalid=0 send_seq=981692 receive_seq=981692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112119 bytes_read=347238 bytes_retransmit=0 bytes_invalid=0 send_seq=18662 receive_seq=18662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998155 adj=49997329 sd_pos=859313 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.31 cputime=5701.883 memavail=3261288 print_time=18317.992 buffer_time=2.176 print_stall=0 extruder: target=210 temp=210.1 pwm=0.416
Stats 64284.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50885845 bytes_read=8236214 bytes_retransmit=9 bytes_invalid=0 send_seq=981768 receive_seq=981768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=7 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112125 bytes_read=347254 bytes_retransmit=0 bytes_invalid=0 send_seq=18663 receive_seq=18663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998155 adj=49997367 sd_pos=859398 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.31 cputime=5702.149 memavail=3261288 print_time=18318.993 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.9 pwm=0.416
Stats 64285.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50889059 bytes_read=8236760 bytes_retransmit=9 bytes_invalid=0 send_seq=981834 receive_seq=981834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112131 bytes_read=347270 bytes_retransmit=0 bytes_invalid=0 send_seq=18664 receive_seq=18664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998158 adj=49997354 sd_pos=859398 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.31 cputime=5702.335 memavail=3261292 print_time=18319.993 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.7 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64286.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50893932 bytes_read=8237438 bytes_retransmit=9 bytes_invalid=0 send_seq=981927 receive_seq=981927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112137 bytes_read=347299 bytes_retransmit=0 bytes_invalid=0 send_seq=18665 receive_seq=18665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998159 adj=49997372 sd_pos=860210 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.31 cputime=5702.491 memavail=3261292 print_time=18320.915 buffer_time=2.097 print_stall=0 extruder: target=210 temp=209.5 pwm=0.468
Stats 64287.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50897556 bytes_read=8238005 bytes_retransmit=9 bytes_invalid=0 send_seq=982000 receive_seq=982000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007845 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112143 bytes_read=347315 bytes_retransmit=0 bytes_invalid=0 send_seq=18666 receive_seq=18666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998161 adj=49997384 sd_pos=860210 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.28 cputime=5702.691 memavail=3260684 print_time=18322.019 buffer_time=2.201 print_stall=0 extruder: target=210 temp=209.4 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64288.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50902778 bytes_read=8238737 bytes_retransmit=9 bytes_invalid=0 send_seq=982097 receive_seq=982097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=7 freq=400007836 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112149 bytes_read=347331 bytes_retransmit=0 bytes_invalid=0 send_seq=18667 receive_seq=18667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998172 adj=49997182 sd_pos=860647 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.28 cputime=5702.898 memavail=3260792 print_time=18323.235 buffer_time=2.361 print_stall=0 extruder: target=210 temp=209.3 pwm=0.468
Stats 64289.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50905499 bytes_read=8239234 bytes_retransmit=9 bytes_invalid=0 send_seq=982156 receive_seq=982156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=400007818 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112155 bytes_read=347347 bytes_retransmit=0 bytes_invalid=0 send_seq=18668 receive_seq=18668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998172 adj=49997313 sd_pos=860647 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.28 cputime=5703.086 memavail=3260792 print_time=18323.994 buffer_time=2.119 print_stall=0 extruder: target=210 temp=209.4 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64290.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50909556 bytes_read=8239856 bytes_retransmit=9 bytes_invalid=0 send_seq=982237 receive_seq=982237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007914 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112161 bytes_read=347363 bytes_retransmit=0 bytes_invalid=0 send_seq=18669 receive_seq=18669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998173 adj=49997348 sd_pos=861208 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.28 cputime=5703.276 memavail=3260792 print_time=18325.134 buffer_time=2.259 print_stall=0 extruder: target=210 temp=209.5 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64291.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50914066 bytes_read=8240497 bytes_retransmit=9 bytes_invalid=0 send_seq=982322 receive_seq=982322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007909 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112167 bytes_read=347392 bytes_retransmit=0 bytes_invalid=0 send_seq=18670 receive_seq=18670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998173 adj=49997165 sd_pos=861345 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.28 cputime=5703.438 memavail=3260792 print_time=18326.111 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.7 pwm=0.406
Stats 64292.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50917403 bytes_read=8241019 bytes_retransmit=9 bytes_invalid=0 send_seq=982386 receive_seq=982386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=85 freq=400007886 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112173 bytes_read=347408 bytes_retransmit=0 bytes_invalid=0 send_seq=18671 receive_seq=18671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998174 adj=49997181 sd_pos=861457 heater_bed: target=60 temp=60.0 pwm=0.252 sysload=0.26 cputime=5703.636 memavail=3260792 print_time=18327.119 buffer_time=2.202 print_stall=0 extruder: target=210 temp=209.9 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64293.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50922308 bytes_read=8241697 bytes_retransmit=9 bytes_invalid=0 send_seq=982475 receive_seq=982475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=297 freq=400007859 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112179 bytes_read=347424 bytes_retransmit=0 bytes_invalid=0 send_seq=18672 receive_seq=18672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998175 adj=49997231 sd_pos=861850 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.26 cputime=5703.781 memavail=3260792 print_time=18328.126 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.1 pwm=0.352
Stats 64294.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50925751 bytes_read=8242248 bytes_retransmit=9 bytes_invalid=0 send_seq=982542 receive_seq=982542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=249 freq=400007909 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112185 bytes_read=347440 bytes_retransmit=0 bytes_invalid=0 send_seq=18673 receive_seq=18673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998176 adj=49997276 sd_pos=861936 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.26 cputime=5704.037 memavail=3260792 print_time=18329.134 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.4 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64295.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50929969 bytes_read=8242815 bytes_retransmit=9 bytes_invalid=0 send_seq=982615 receive_seq=982615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007872 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112191 bytes_read=347456 bytes_retransmit=0 bytes_invalid=0 send_seq=18674 receive_seq=18674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998177 adj=49997192 sd_pos=862501 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.26 cputime=5704.218 memavail=3260792 print_time=18330.228 buffer_time=2.302 print_stall=0 extruder: target=210 temp=210.5 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64296.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50934362 bytes_read=8243466 bytes_retransmit=9 bytes_invalid=0 send_seq=982700 receive_seq=982700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=138 freq=400007916 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112197 bytes_read=347485 bytes_retransmit=0 bytes_invalid=0 send_seq=18675 receive_seq=18675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998177 adj=49997260 sd_pos=862749 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.26 cputime=5704.388 memavail=3260792 print_time=18331.162 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.6 pwm=0.352
Stats 64297.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50937595 bytes_read=8244003 bytes_retransmit=9 bytes_invalid=0 send_seq=982767 receive_seq=982767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=166 freq=400007957 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112203 bytes_read=347501 bytes_retransmit=0 bytes_invalid=0 send_seq=18676 receive_seq=18676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998177 adj=49997186 sd_pos=862749 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.32 cputime=5704.576 memavail=3260800 print_time=18332.162 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.6 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64298.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50942805 bytes_read=8244731 bytes_retransmit=9 bytes_invalid=0 send_seq=982866 receive_seq=982866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007915 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112209 bytes_read=347517 bytes_retransmit=0 bytes_invalid=0 send_seq=18677 receive_seq=18677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998178 adj=49997123 sd_pos=863109 heater_bed: target=60 temp=60.0 pwm=0.040 sysload=0.32 cputime=5704.720 memavail=3260800 print_time=18333.195 buffer_time=2.238 print_stall=0 extruder: target=210 temp=210.6 pwm=0.331
Stats 64299.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50945853 bytes_read=8245272 bytes_retransmit=9 bytes_invalid=0 send_seq=982931 receive_seq=982931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400008062 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112215 bytes_read=347533 bytes_retransmit=0 bytes_invalid=0 send_seq=18678 receive_seq=18678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998184 adj=49997211 sd_pos=863196 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.32 cputime=5704.983 memavail=3260800 print_time=18334.150 buffer_time=2.158 print_stall=0 extruder: target=210 temp=210.4 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64300.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50950414 bytes_read=8245884 bytes_retransmit=9 bytes_invalid=0 send_seq=983013 receive_seq=983013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400008034 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=112221 bytes_read=347549 bytes_retransmit=0 bytes_invalid=0 send_seq=18679 receive_seq=18679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998189 adj=49997046 sd_pos=863763 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.32 cputime=5705.172 memavail=3260800 print_time=18335.313 buffer_time=2.309 print_stall=0 extruder: target=210 temp=210.3 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64301.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50953964 bytes_read=8246456 bytes_retransmit=9 bytes_invalid=0 send_seq=983084 receive_seq=983084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008069 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112227 bytes_read=347578 bytes_retransmit=0 bytes_invalid=0 send_seq=18680 receive_seq=18680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998189 adj=49997184 sd_pos=863896 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.32 cputime=5705.295 memavail=3260800 print_time=18336.018 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.1 pwm=0.383
Stats 64302.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50957224 bytes_read=8247007 bytes_retransmit=9 bytes_invalid=0 send_seq=983151 receive_seq=983151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008125 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112233 bytes_read=347594 bytes_retransmit=0 bytes_invalid=0 send_seq=18681 receive_seq=18681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998190 adj=49997129 sd_pos=863896 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.30 cputime=5705.482 memavail=3260800 print_time=18337.018 buffer_time=2.013 print_stall=0 extruder: target=210 temp=209.8 pwm=0.437
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64303.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50962745 bytes_read=8247745 bytes_retransmit=9 bytes_invalid=0 send_seq=983255 receive_seq=983255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=534 freq=400008085 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112239 bytes_read=347610 bytes_retransmit=0 bytes_invalid=0 send_seq=18682 receive_seq=18682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998192 adj=49997057 sd_pos=864360 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.30 cputime=5705.676 memavail=3260800 print_time=18338.321 buffer_time=2.315 print_stall=0 extruder: target=210 temp=209.7 pwm=0.437
Stats 64304.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50965917 bytes_read=8248282 bytes_retransmit=9 bytes_invalid=0 send_seq=983319 receive_seq=983319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400008036 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112245 bytes_read=347626 bytes_retransmit=0 bytes_invalid=0 send_seq=18683 receive_seq=18683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998194 adj=49997182 sd_pos=864474 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.30 cputime=5705.874 memavail=3260800 print_time=18339.088 buffer_time=2.081 print_stall=0 extruder: target=210 temp=209.5 pwm=0.437
Stats 64305.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50969196 bytes_read=8248823 bytes_retransmit=9 bytes_invalid=0 send_seq=983384 receive_seq=983384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007993 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112251 bytes_read=347642 bytes_retransmit=0 bytes_invalid=0 send_seq=18684 receive_seq=18684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998195 adj=49997282 sd_pos=864474 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.30 cputime=5706.064 memavail=3260800 print_time=18340.088 buffer_time=2.081 print_stall=0 extruder: target=210 temp=209.5 pwm=0.437
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64306.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50973651 bytes_read=8249445 bytes_retransmit=9 bytes_invalid=0 send_seq=983468 receive_seq=983468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007953 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112257 bytes_read=347671 bytes_retransmit=0 bytes_invalid=0 send_seq=18685 receive_seq=18685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998197 adj=49997350 sd_pos=865270 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.30 cputime=5706.202 memavail=3260800 print_time=18341.021 buffer_time=2.013 print_stall=0 extruder: target=210 temp=209.5 pwm=0.434
Stats 64307.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=50977469 bytes_read=8250012 bytes_retransmit=9 bytes_invalid=0 send_seq=983539 receive_seq=983539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007917 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112263 bytes_read=347687 bytes_retransmit=0 bytes_invalid=0 send_seq=18686 receive_seq=18686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998202 adj=49997419 sd_pos=865312 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.27 cputime=5706.433 memavail=3260304 print_time=18342.115 buffer_time=2.107 print_stall=0 extruder: target=210 temp=209.6 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64308.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50982496 bytes_read=8250679 bytes_retransmit=9 bytes_invalid=0 send_seq=983626 receive_seq=983626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=375 freq=400007897 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112269 bytes_read=347703 bytes_retransmit=0 bytes_invalid=0 send_seq=18687 receive_seq=18687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998206 adj=49997485 sd_pos=865666 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.27 cputime=5706.615 memavail=3260052 print_time=18343.345 buffer_time=2.336 print_stall=0 extruder: target=210 temp=209.7 pwm=0.434
Stats 64309.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50985247 bytes_read=8251176 bytes_retransmit=9 bytes_invalid=0 send_seq=983685 receive_seq=983685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=400007868 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112275 bytes_read=347719 bytes_retransmit=0 bytes_invalid=0 send_seq=18688 receive_seq=18688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998207 adj=49997470 sd_pos=865755 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.27 cputime=5706.780 memavail=3260052 print_time=18344.049 buffer_time=2.039 print_stall=0 extruder: target=210 temp=209.8 pwm=0.382
Stats 64310.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50988777 bytes_read=8251748 bytes_retransmit=9 bytes_invalid=0 send_seq=983756 receive_seq=983756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007852 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112281 bytes_read=347735 bytes_retransmit=0 bytes_invalid=0 send_seq=18689 receive_seq=18689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998211 adj=49997533 sd_pos=865755 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.27 cputime=5707.110 memavail=3260052 print_time=18345.099 buffer_time=2.088 print_stall=0 extruder: target=210 temp=210.0 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64311.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50993933 bytes_read=8252449 bytes_retransmit=9 bytes_invalid=0 send_seq=983853 receive_seq=983853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=112287 bytes_read=347764 bytes_retransmit=0 bytes_invalid=0 send_seq=18690 receive_seq=18690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998211 adj=49997542 sd_pos=866456 heater_bed: target=60 temp=60.0 pwm=0.270 sysload=0.27 cputime=5707.264 memavail=3260052 print_time=18346.139 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.2 pwm=0.329
Stats 64312.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=50997113 bytes_read=8252981 bytes_retransmit=9 bytes_invalid=0 send_seq=983919 receive_seq=983919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007799 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=112293 bytes_read=347780 bytes_retransmit=0 bytes_invalid=0 send_seq=18691 receive_seq=18691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998212 adj=49997524 sd_pos=866456 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.25 cputime=5707.449 memavail=3260052 print_time=18347.139 buffer_time=2.126 print_stall=0 extruder: target=210 temp=210.4 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64313.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51002433 bytes_read=8253719 bytes_retransmit=9 bytes_invalid=0 send_seq=984020 receive_seq=984020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=764 freq=400007778 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=112299 bytes_read=347796 bytes_retransmit=0 bytes_invalid=0 send_seq=18692 receive_seq=18692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998214 adj=49997525 sd_pos=866928 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.25 cputime=5707.645 memavail=3260052 print_time=18348.391 buffer_time=2.378 print_stall=0 extruder: target=210 temp=210.5 pwm=0.329
Stats 64314.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51005694 bytes_read=8254270 bytes_retransmit=9 bytes_invalid=0 send_seq=984087 receive_seq=984087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=123 freq=400007752 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=112305 bytes_read=347812 bytes_retransmit=0 bytes_invalid=0 send_seq=18693 receive_seq=18693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998216 adj=49997479 sd_pos=867000 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.25 cputime=5707.804 memavail=3260052 print_time=18349.142 buffer_time=2.128 print_stall=0 extruder: target=210 temp=210.3 pwm=0.393
Stats 64315.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51009313 bytes_read=8254832 bytes_retransmit=9 bytes_invalid=0 send_seq=984159 receive_seq=984159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=112311 bytes_read=347828 bytes_retransmit=0 bytes_invalid=0 send_seq=18694 receive_seq=18694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998219 adj=49997542 sd_pos=867000 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.25 cputime=5708.059 memavail=3260052 print_time=18350.161 buffer_time=2.147 print_stall=0 extruder: target=210 temp=210.3 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64316.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51013867 bytes_read=8255494 bytes_retransmit=9 bytes_invalid=0 send_seq=984248 receive_seq=984248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112317 bytes_read=347857 bytes_retransmit=0 bytes_invalid=0 send_seq=18695 receive_seq=18695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998221 adj=49997544 sd_pos=867800 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.25 cputime=5708.193 memavail=3260052 print_time=18351.061 buffer_time=2.046 print_stall=0 extruder: target=210 temp=210.1 pwm=0.393
Stats 64317.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51017748 bytes_read=8256088 bytes_retransmit=9 bytes_invalid=0 send_seq=984324 receive_seq=984324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=66 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112323 bytes_read=347873 bytes_retransmit=0 bytes_invalid=0 send_seq=18696 receive_seq=18696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998223 adj=49997577 sd_pos=867843 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.23 cputime=5708.407 memavail=3259304 print_time=18352.216 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.0 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64318.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51020652 bytes_read=8256612 bytes_retransmit=9 bytes_invalid=0 send_seq=984386 receive_seq=984386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112329 bytes_read=347889 bytes_retransmit=0 bytes_invalid=0 send_seq=18697 receive_seq=18697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998224 adj=49997494 sd_pos=868070 heater_bed: target=60 temp=60.0 pwm=0.217 sysload=0.23 cputime=5708.541 memavail=3259304 print_time=18353.017 buffer_time=1.998 print_stall=0 extruder: target=210 temp=209.8 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64319.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51026149 bytes_read=8257344 bytes_retransmit=9 bytes_invalid=0 send_seq=984489 receive_seq=984489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112335 bytes_read=347905 bytes_retransmit=0 bytes_invalid=0 send_seq=18698 receive_seq=18698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998224 adj=49997518 sd_pos=868199 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.23 cputime=5708.742 memavail=3259304 print_time=18354.227 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.7 pwm=0.436
Stats 64320.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51029439 bytes_read=8257865 bytes_retransmit=9 bytes_invalid=0 send_seq=984550 receive_seq=984550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112341 bytes_read=347921 bytes_retransmit=0 bytes_invalid=0 send_seq=18699 receive_seq=18699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998225 adj=49997498 sd_pos=868313 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.23 cputime=5708.978 memavail=3259304 print_time=18355.246 buffer_time=2.165 print_stall=0 extruder: target=210 temp=209.6 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64321.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51034417 bytes_read=8258552 bytes_retransmit=9 bytes_invalid=0 send_seq=984644 receive_seq=984644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112347 bytes_read=347937 bytes_retransmit=0 bytes_invalid=0 send_seq=18700 receive_seq=18700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998226 adj=49997478 sd_pos=869016 heater_bed: target=60 temp=60.0 pwm=0.385 sysload=0.23 cputime=5709.133 memavail=3259304 print_time=18356.262 buffer_time=2.181 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
Stats 64322.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51037957 bytes_read=8259128 bytes_retransmit=9 bytes_invalid=0 send_seq=984716 receive_seq=984716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=14 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112353 bytes_read=347966 bytes_retransmit=0 bytes_invalid=0 send_seq=18701 receive_seq=18701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998227 adj=49997455 sd_pos=869189 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.21 cputime=5709.327 memavail=3259304 print_time=18357.245 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64323.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51042086 bytes_read=8259751 bytes_retransmit=9 bytes_invalid=0 send_seq=984797 receive_seq=984797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112359 bytes_read=347982 bytes_retransmit=0 bytes_invalid=0 send_seq=18702 receive_seq=18702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998228 adj=49997472 sd_pos=869597 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.21 cputime=5709.489 memavail=3259304 print_time=18358.203 buffer_time=2.120 print_stall=0 extruder: target=210 temp=209.6 pwm=0.421
Stats 64324.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51045961 bytes_read=8260348 bytes_retransmit=9 bytes_invalid=0 send_seq=984873 receive_seq=984873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=0 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112365 bytes_read=347998 bytes_retransmit=0 bytes_invalid=0 send_seq=18703 receive_seq=18703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998228 adj=49997472 sd_pos=869670 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.21 cputime=5709.681 memavail=3259304 print_time=18359.255 buffer_time=2.172 print_stall=0 extruder: target=210 temp=209.7 pwm=0.421
Stats 64325.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51049366 bytes_read=8260909 bytes_retransmit=9 bytes_invalid=0 send_seq=984942 receive_seq=984942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112371 bytes_read=348014 bytes_retransmit=0 bytes_invalid=0 send_seq=18704 receive_seq=18704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998230 adj=49997465 sd_pos=869760 heater_bed: target=60 temp=60.0 pwm=0.227 sysload=0.21 cputime=5709.881 memavail=3259304 print_time=18360.297 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.9 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64326.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51054521 bytes_read=8261596 bytes_retransmit=9 bytes_invalid=0 send_seq=985039 receive_seq=985039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=8 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112377 bytes_read=348043 bytes_retransmit=0 bytes_invalid=0 send_seq=18705 receive_seq=18705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998234 adj=49997482 sd_pos=870419 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.21 cputime=5710.079 memavail=3259304 print_time=18361.300 buffer_time=2.204 print_stall=0 extruder: target=210 temp=210.0 pwm=0.421
Stats 64327.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51057922 bytes_read=8262163 bytes_retransmit=9 bytes_invalid=0 send_seq=985109 receive_seq=985109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=125 freq=400007553 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112383 bytes_read=348059 bytes_retransmit=0 bytes_invalid=0 send_seq=18706 receive_seq=18706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998235 adj=49997506 sd_pos=870534 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.19 cputime=5710.285 memavail=3260080 print_time=18362.330 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.1 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64328.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51062856 bytes_read=8262856 bytes_retransmit=9 bytes_invalid=0 send_seq=985202 receive_seq=985202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=458 freq=400007535 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112389 bytes_read=348075 bytes_retransmit=0 bytes_invalid=0 send_seq=18707 receive_seq=18707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998235 adj=49997508 sd_pos=870899 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.19 cputime=5710.444 memavail=3260080 print_time=18363.370 buffer_time=2.246 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
Stats 64329.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51066132 bytes_read=8263407 bytes_retransmit=9 bytes_invalid=0 send_seq=985269 receive_seq=985269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007527 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112395 bytes_read=348091 bytes_retransmit=0 bytes_invalid=0 send_seq=18708 receive_seq=18708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998235 adj=49997493 sd_pos=870971 heater_bed: target=60 temp=60.0 pwm=0.049 sysload=0.19 cputime=5710.624 memavail=3260080 print_time=18364.233 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.5 pwm=0.355
Stats 64330.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51069533 bytes_read=8263968 bytes_retransmit=9 bytes_invalid=0 send_seq=985338 receive_seq=985338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007538 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112401 bytes_read=348107 bytes_retransmit=0 bytes_invalid=0 send_seq=18709 receive_seq=18709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998237 adj=49997492 sd_pos=871044 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.19 cputime=5710.802 memavail=3260080 print_time=18365.164 buffer_time=2.010 print_stall=0 extruder: target=210 temp=210.4 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64331.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51074248 bytes_read=8264625 bytes_retransmit=9 bytes_invalid=0 send_seq=985429 receive_seq=985429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007540 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=112407 bytes_read=348123 bytes_retransmit=0 bytes_invalid=0 send_seq=18710 receive_seq=18710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998238 adj=49997466 sd_pos=871743 heater_bed: target=60 temp=60.0 pwm=0.277 sysload=0.19 cputime=5711.016 memavail=3260080 print_time=18366.208 buffer_time=2.053 print_stall=0 extruder: target=210 temp=210.4 pwm=0.361
Stats 64332.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51077483 bytes_read=8265177 bytes_retransmit=9 bytes_invalid=0 send_seq=985496 receive_seq=985496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=400007522 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112413 bytes_read=348152 bytes_retransmit=0 bytes_invalid=0 send_seq=18711 receive_seq=18711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998241 adj=49997444 sd_pos=871743 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.18 cputime=5711.203 memavail=3260080 print_time=18367.208 buffer_time=2.052 print_stall=0 extruder: target=210 temp=210.3 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64333.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51083046 bytes_read=8265934 bytes_retransmit=9 bytes_invalid=0 send_seq=985601 receive_seq=985601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112419 bytes_read=348168 bytes_retransmit=0 bytes_invalid=0 send_seq=18712 receive_seq=18712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998240 adj=49997473 sd_pos=872219 heater_bed: target=60 temp=60.0 pwm=0.241 sysload=0.18 cputime=5711.388 memavail=3260080 print_time=18368.463 buffer_time=2.307 print_stall=0 extruder: target=210 temp=210.2 pwm=0.361
Stats 64334.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51085542 bytes_read=8266412 bytes_retransmit=9 bytes_invalid=0 send_seq=985654 receive_seq=985654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007503 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112431 bytes_read=348200 bytes_retransmit=0 bytes_invalid=0 send_seq=18714 receive_seq=18714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998242 adj=49997397 sd_pos=872219 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.18 cputime=5711.533 memavail=3260080 print_time=18369.213 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.1 pwm=0.413
Stats 64335.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51089364 bytes_read=8267004 bytes_retransmit=9 bytes_invalid=0 send_seq=985729 receive_seq=985729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007520 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112437 bytes_read=348216 bytes_retransmit=0 bytes_invalid=0 send_seq=18715 receive_seq=18715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998242 adj=49997462 sd_pos=872358 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.18 cputime=5711.733 memavail=3260080 print_time=18370.265 buffer_time=2.107 print_stall=0 extruder: target=210 temp=210.0 pwm=0.413
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64336.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51094333 bytes_read=8267695 bytes_retransmit=9 bytes_invalid=0 send_seq=985824 receive_seq=985824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=631 freq=400007516 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112443 bytes_read=348232 bytes_retransmit=0 bytes_invalid=0 send_seq=18716 receive_seq=18716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998245 adj=49997408 sd_pos=873198 heater_bed: target=60 temp=60.0 pwm=0.230 sysload=0.18 cputime=5711.945 memavail=3260344 print_time=18371.359 buffer_time=2.201 print_stall=0 extruder: target=210 temp=209.8 pwm=0.413
Stats 64337.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51097982 bytes_read=8268212 bytes_retransmit=9 bytes_invalid=0 send_seq=985887 receive_seq=985887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=370 freq=400007511 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112449 bytes_read=348261 bytes_retransmit=0 bytes_invalid=0 send_seq=18717 receive_seq=18717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998249 adj=49997415 sd_pos=873198 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.16 cputime=5712.138 memavail=3260344 print_time=18372.361 buffer_time=2.202 print_stall=0 extruder: target=210 temp=209.7 pwm=0.413
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64338.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51101177 bytes_read=8268775 bytes_retransmit=9 bytes_invalid=0 send_seq=985953 receive_seq=985953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007500 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112455 bytes_read=348277 bytes_retransmit=0 bytes_invalid=0 send_seq=18718 receive_seq=18718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998249 adj=49997450 sd_pos=873423 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.16 cputime=5712.273 memavail=3260344 print_time=18373.160 buffer_time=2.001 print_stall=0 extruder: target=210 temp=209.6 pwm=0.444
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64339.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51106584 bytes_read=8269471 bytes_retransmit=9 bytes_invalid=0 send_seq=986050 receive_seq=986050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007497 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112461 bytes_read=348293 bytes_retransmit=0 bytes_invalid=0 send_seq=18719 receive_seq=18719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998250 adj=49997462 sd_pos=873550 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.16 cputime=5712.475 memavail=3260344 print_time=18374.360 buffer_time=2.200 print_stall=0 extruder: target=210 temp=209.6 pwm=0.444
Stats 64340.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51109970 bytes_read=8270018 bytes_retransmit=9 bytes_invalid=0 send_seq=986119 receive_seq=986119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007489 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112467 bytes_read=348309 bytes_retransmit=0 bytes_invalid=0 send_seq=18720 receive_seq=18720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998253 adj=49997437 sd_pos=873666 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.16 cputime=5712.674 memavail=3260344 print_time=18375.380 buffer_time=2.210 print_stall=0 extruder: target=210 temp=209.5 pwm=0.444
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64341.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51114535 bytes_read=8270675 bytes_retransmit=9 bytes_invalid=0 send_seq=986207 receive_seq=986207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007481 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112473 bytes_read=348325 bytes_retransmit=0 bytes_invalid=0 send_seq=18721 receive_seq=18721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998254 adj=49997463 sd_pos=874396 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.16 cputime=5712.828 memavail=3260344 print_time=18376.194 buffer_time=2.023 print_stall=0 extruder: target=210 temp=209.7 pwm=0.444
Stats 64342.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51117913 bytes_read=8271236 bytes_retransmit=9 bytes_invalid=0 send_seq=986276 receive_seq=986276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007476 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112479 bytes_read=348354 bytes_retransmit=0 bytes_invalid=0 send_seq=18722 receive_seq=18722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998255 adj=49997480 sd_pos=874574 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.23 cputime=5713.034 memavail=3260344 print_time=18377.212 buffer_time=2.041 print_stall=0 extruder: target=210 temp=209.8 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64343.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51122385 bytes_read=8271889 bytes_retransmit=9 bytes_invalid=0 send_seq=986363 receive_seq=986363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007469 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112485 bytes_read=348370 bytes_retransmit=0 bytes_invalid=0 send_seq=18723 receive_seq=18723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998256 adj=49997466 sd_pos=874926 heater_bed: target=60 temp=60.0 pwm=0.001 sysload=0.23 cputime=5713.220 memavail=3260344 print_time=18378.358 buffer_time=2.186 print_stall=0 extruder: target=210 temp=210.0 pwm=0.388
Stats 64344.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51125663 bytes_read=8272436 bytes_retransmit=9 bytes_invalid=0 send_seq=986429 receive_seq=986429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007476 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112491 bytes_read=348386 bytes_retransmit=0 bytes_invalid=0 send_seq=18724 receive_seq=18724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998257 adj=49997446 sd_pos=875014 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.23 cputime=5713.380 memavail=3260344 print_time=18379.187 buffer_time=2.015 print_stall=0 extruder: target=210 temp=210.2 pwm=0.388
Stats 64345.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51128859 bytes_read=8272977 bytes_retransmit=9 bytes_invalid=0 send_seq=986494 receive_seq=986494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007472 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112497 bytes_read=348402 bytes_retransmit=0 bytes_invalid=0 send_seq=18725 receive_seq=18725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998257 adj=49997443 sd_pos=875014 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.23 cputime=5713.566 memavail=3260344 print_time=18380.187 buffer_time=2.015 print_stall=0 extruder: target=210 temp=210.3 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64346.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51134668 bytes_read=8273689 bytes_retransmit=9 bytes_invalid=0 send_seq=986596 receive_seq=986596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1339 freq=400007470 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112503 bytes_read=348431 bytes_retransmit=0 bytes_invalid=0 send_seq=18726 receive_seq=18726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998263 adj=49997425 sd_pos=877553 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.23 cputime=5713.759 memavail=3259232 print_time=18381.384 buffer_time=2.181 print_stall=0 extruder: target=210 temp=210.4 pwm=0.330
Stats 64347.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51137921 bytes_read=8274236 bytes_retransmit=9 bytes_invalid=0 send_seq=986662 receive_seq=986662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=1472 freq=400007461 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112509 bytes_read=348447 bytes_retransmit=0 bytes_invalid=0 send_seq=18727 receive_seq=18727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998264 adj=49997473 sd_pos=877625 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.21 cputime=5713.977 memavail=3259348 print_time=18382.412 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.5 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64348.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51144382 bytes_read=8275018 bytes_retransmit=9 bytes_invalid=0 send_seq=986780 receive_seq=986772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=119 freq=400007498 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112515 bytes_read=348462 bytes_retransmit=0 bytes_invalid=0 send_seq=18728 receive_seq=18728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998265 adj=49997468 sd_pos=878027 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.21 cputime=5714.176 memavail=3259348 print_time=18383.638 buffer_time=2.434 print_stall=0 extruder: target=210 temp=210.5 pwm=0.330
Stats 64349.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51147686 bytes_read=8275594 bytes_retransmit=9 bytes_invalid=0 send_seq=986847 receive_seq=986847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007541 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112521 bytes_read=348477 bytes_retransmit=0 bytes_invalid=0 send_seq=18729 receive_seq=18729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998265 adj=49997384 sd_pos=878027 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.21 cputime=5714.319 memavail=3259348 print_time=18384.384 buffer_time=2.179 print_stall=0 extruder: target=210 temp=210.3 pwm=0.381
Stats 64350.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51151109 bytes_read=8276157 bytes_retransmit=9 bytes_invalid=0 send_seq=986917 receive_seq=986917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=311 freq=400007523 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112527 bytes_read=348492 bytes_retransmit=0 bytes_invalid=0 send_seq=18730 receive_seq=18730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998266 adj=49997321 sd_pos=878171 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.21 cputime=5714.518 memavail=3259348 print_time=18385.433 buffer_time=2.220 print_stall=0 extruder: target=210 temp=210.3 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64351.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51155991 bytes_read=8276833 bytes_retransmit=9 bytes_invalid=0 send_seq=987009 receive_seq=987009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007515 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112533 bytes_read=348507 bytes_retransmit=0 bytes_invalid=0 send_seq=18731 receive_seq=18731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998266 adj=49997362 sd_pos=881365 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.21 cputime=5714.643 memavail=3259352 print_time=18386.277 buffer_time=2.063 print_stall=0 extruder: target=210 temp=210.1 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64352.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51159434 bytes_read=8277370 bytes_retransmit=9 bytes_invalid=0 send_seq=987076 receive_seq=987076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5282 freq=400007518 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112539 bytes_read=348535 bytes_retransmit=0 bytes_invalid=0 send_seq=18732 receive_seq=18732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998267 adj=49997370 sd_pos=896332 heater_bed: target=60 temp=60.0 pwm=0.233 sysload=0.28 cputime=5714.910 memavail=3259348 print_time=18387.419 buffer_time=2.205 print_stall=0 extruder: target=210 temp=209.9 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64353.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51164625 bytes_read=8278078 bytes_retransmit=9 bytes_invalid=0 send_seq=987171 receive_seq=987171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=5333 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112545 bytes_read=348551 bytes_retransmit=0 bytes_invalid=0 send_seq=18733 receive_seq=18733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998268 adj=49997364 sd_pos=898141 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.28 cputime=5715.078 memavail=3259348 print_time=18388.361 buffer_time=2.146 print_stall=0 extruder: target=210 temp=209.8 pwm=0.435
Stats 64354.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51172738 bytes_read=8279004 bytes_retransmit=9 bytes_invalid=0 send_seq=987313 receive_seq=987313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=822 freq=400007583 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112551 bytes_read=348567 bytes_retransmit=0 bytes_invalid=0 send_seq=18734 receive_seq=18734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998270 adj=49997237 sd_pos=898141 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.28 cputime=5715.287 memavail=3259348 print_time=18389.361 buffer_time=2.146 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64355.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51178898 bytes_read=8279776 bytes_retransmit=9 bytes_invalid=0 send_seq=987427 receive_seq=987427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112557 bytes_read=348583 bytes_retransmit=0 bytes_invalid=0 send_seq=18735 receive_seq=18735 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998272 adj=49997304 sd_pos=898538 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.28 cputime=5715.452 memavail=3259348 print_time=18390.511 buffer_time=2.295 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
Stats 64356.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51181508 bytes_read=8280268 bytes_retransmit=9 bytes_invalid=0 send_seq=987482 receive_seq=987482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112563 bytes_read=348599 bytes_retransmit=0 bytes_invalid=0 send_seq=18736 receive_seq=18736 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998272 adj=49997214 sd_pos=898680 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.28 cputime=5715.609 memavail=3259384 print_time=18391.227 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.8 pwm=0.408
Stats 64357.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51185219 bytes_read=8280854 bytes_retransmit=9 bytes_invalid=0 send_seq=987556 receive_seq=987556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112569 bytes_read=348628 bytes_retransmit=0 bytes_invalid=0 send_seq=18737 receive_seq=18737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998273 adj=49997139 sd_pos=898680 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.25 cputime=5715.850 memavail=3259384 print_time=18392.299 buffer_time=2.082 print_stall=0 extruder: target=210 temp=210.1 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64358.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51190392 bytes_read=8281562 bytes_retransmit=9 bytes_invalid=0 send_seq=987654 receive_seq=987654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1834 freq=400007846 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112575 bytes_read=348644 bytes_retransmit=0 bytes_invalid=0 send_seq=18738 receive_seq=18738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998272 adj=49997073 sd_pos=907970 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.25 cputime=5716.011 memavail=3258640 print_time=18393.345 buffer_time=2.128 print_stall=0 extruder: target=210 temp=210.2 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64359.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51193936 bytes_read=8282129 bytes_retransmit=9 bytes_invalid=0 send_seq=987724 receive_seq=987724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=6172 freq=400007900 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112581 bytes_read=348660 bytes_retransmit=0 bytes_invalid=0 send_seq=18739 receive_seq=18739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998273 adj=49997024 sd_pos=918548 heater_bed: target=60 temp=60.0 pwm=0.330 sysload=0.25 cputime=5716.171 memavail=3258640 print_time=18394.452 buffer_time=2.234 print_stall=0 extruder: target=210 temp=210.5 pwm=0.350
Stats 64360.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51200947 bytes_read=8282971 bytes_retransmit=9 bytes_invalid=0 send_seq=987850 receive_seq=987850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3469 freq=400007946 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112587 bytes_read=348676 bytes_retransmit=0 bytes_invalid=0 send_seq=18740 receive_seq=18740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998273 adj=49997013 sd_pos=918548 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.25 cputime=5716.374 memavail=3258640 print_time=18395.451 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.6 pwm=0.350
Stats 64361.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51207629 bytes_read=8283802 bytes_retransmit=9 bytes_invalid=0 send_seq=987973 receive_seq=987973 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=20 upcoming_bytes=613 freq=400007902 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112593 bytes_read=348692 bytes_retransmit=0 bytes_invalid=0 send_seq=18741 receive_seq=18741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998273 adj=49996992 sd_pos=918658 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.25 cputime=5716.593 memavail=3258640 print_time=18396.473 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.6 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64362.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51213066 bytes_read=8284503 bytes_retransmit=9 bytes_invalid=0 send_seq=988070 receive_seq=988070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=16 freq=400007902 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112599 bytes_read=348721 bytes_retransmit=0 bytes_invalid=0 send_seq=18742 receive_seq=18742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998277 adj=49997116 sd_pos=919019 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.23 cputime=5716.791 memavail=3258640 print_time=18397.471 buffer_time=2.204 print_stall=0 extruder: target=210 temp=210.7 pwm=0.327
Stats 64363.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51216259 bytes_read=8285051 bytes_retransmit=9 bytes_invalid=0 send_seq=988136 receive_seq=988136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007868 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112605 bytes_read=348737 bytes_retransmit=0 bytes_invalid=0 send_seq=18743 receive_seq=18743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998278 adj=49997192 sd_pos=919019 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.23 cputime=5716.975 memavail=3258640 print_time=18398.471 buffer_time=2.203 print_stall=0 extruder: target=210 temp=210.8 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64364.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51219804 bytes_read=8285578 bytes_retransmit=9 bytes_invalid=0 send_seq=988198 receive_seq=988198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007851 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112611 bytes_read=348753 bytes_retransmit=0 bytes_invalid=0 send_seq=18744 receive_seq=18744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998280 adj=49997268 sd_pos=922537 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.23 cputime=5717.158 memavail=3258640 print_time=18399.363 buffer_time=2.095 print_stall=0 extruder: target=210 temp=210.7 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64365.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51224516 bytes_read=8286239 bytes_retransmit=9 bytes_invalid=0 send_seq=988287 receive_seq=988287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1990 freq=400007825 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112617 bytes_read=348769 bytes_retransmit=0 bytes_invalid=0 send_seq=18745 receive_seq=18745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998282 adj=49997324 sd_pos=935323 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.23 cputime=5717.477 memavail=3258640 print_time=18400.335 buffer_time=2.067 print_stall=0 extruder: target=210 temp=210.6 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64366.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51228269 bytes_read=8286811 bytes_retransmit=9 bytes_invalid=0 send_seq=988361 receive_seq=988361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=5090 freq=400007905 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112623 bytes_read=348785 bytes_retransmit=0 bytes_invalid=0 send_seq=18746 receive_seq=18746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998282 adj=49997387 sd_pos=943667 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.23 cputime=5717.732 memavail=3258436 print_time=18401.387 buffer_time=2.118 print_stall=0 extruder: target=210 temp=210.4 pwm=0.370
Stats 64367.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51235475 bytes_read=8287678 bytes_retransmit=9 bytes_invalid=0 send_seq=988491 receive_seq=988491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2170 freq=400007871 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112629 bytes_read=348814 bytes_retransmit=0 bytes_invalid=0 send_seq=18747 receive_seq=18747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998283 adj=49997249 sd_pos=943667 heater_bed: target=60 temp=60.0 pwm=0.268 sysload=0.21 cputime=5718.028 memavail=3258432 print_time=18402.394 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
Stats 64368.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51241194 bytes_read=8288440 bytes_retransmit=9 bytes_invalid=0 send_seq=988597 receive_seq=988597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112635 bytes_read=348830 bytes_retransmit=0 bytes_invalid=0 send_seq=18748 receive_seq=18748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998285 adj=49997326 sd_pos=943824 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.21 cputime=5718.240 memavail=3258432 print_time=18403.400 buffer_time=2.130 print_stall=0 extruder: target=210 temp=209.9 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64369.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51245839 bytes_read=8289082 bytes_retransmit=9 bytes_invalid=0 send_seq=988685 receive_seq=988685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007811 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112641 bytes_read=348846 bytes_retransmit=0 bytes_invalid=0 send_seq=18749 receive_seq=18749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998286 adj=49997382 sd_pos=944226 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.21 cputime=5718.387 memavail=3258432 print_time=18404.373 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
Stats 64370.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51248882 bytes_read=8289559 bytes_retransmit=9 bytes_invalid=0 send_seq=988737 receive_seq=988737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112647 bytes_read=348862 bytes_retransmit=0 bytes_invalid=0 send_seq=18750 receive_seq=18750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998287 adj=49997437 sd_pos=944226 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.21 cputime=5718.573 memavail=3258432 print_time=18405.373 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64371.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51253624 bytes_read=8290226 bytes_retransmit=9 bytes_invalid=0 send_seq=988828 receive_seq=988828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112653 bytes_read=348878 bytes_retransmit=0 bytes_invalid=0 send_seq=18751 receive_seq=18751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998288 adj=49997456 sd_pos=944556 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.21 cputime=5718.802 memavail=3258432 print_time=18406.495 buffer_time=2.194 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
Stats 64373.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51257750 bytes_read=8290848 bytes_retransmit=9 bytes_invalid=0 send_seq=988909 receive_seq=988909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=553 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112659 bytes_read=348907 bytes_retransmit=0 bytes_invalid=0 send_seq=18752 receive_seq=18752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998289 adj=49997465 sd_pos=944643 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.20 cputime=5719.110 memavail=3258432 print_time=18407.535 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.7 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64374.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51262017 bytes_read=8291480 bytes_retransmit=9 bytes_invalid=0 send_seq=988989 receive_seq=988989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=994 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112665 bytes_read=348923 bytes_retransmit=0 bytes_invalid=0 send_seq=18753 receive_seq=18753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998291 adj=49997479 sd_pos=945448 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.20 cputime=5719.303 memavail=3258432 print_time=18408.472 buffer_time=2.113 print_stall=0 extruder: target=210 temp=209.9 pwm=0.383
Stats 64375.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51266415 bytes_read=8292102 bytes_retransmit=9 bytes_invalid=0 send_seq=989073 receive_seq=989073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112671 bytes_read=348939 bytes_retransmit=0 bytes_invalid=0 send_seq=18754 receive_seq=18754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998292 adj=49997535 sd_pos=945448 heater_bed: target=60 temp=60.0 pwm=0.286 sysload=0.20 cputime=5719.501 memavail=3258432 print_time=18409.473 buffer_time=2.112 print_stall=0 extruder: target=210 temp=209.9 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64376.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51270499 bytes_read=8292724 bytes_retransmit=9 bytes_invalid=0 send_seq=989154 receive_seq=989154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007850 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112677 bytes_read=348955 bytes_retransmit=0 bytes_invalid=0 send_seq=18755 receive_seq=18755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998295 adj=49997544 sd_pos=945848 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.20 cputime=5719.652 memavail=3258432 print_time=18410.379 buffer_time=2.017 print_stall=0 extruder: target=210 temp=210.0 pwm=0.383
Stats 64377.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51274842 bytes_read=8293355 bytes_retransmit=9 bytes_invalid=0 send_seq=989237 receive_seq=989237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007832 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112683 bytes_read=348971 bytes_retransmit=0 bytes_invalid=0 send_seq=18756 receive_seq=18756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998297 adj=49997299 sd_pos=945848 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.20 cputime=5719.845 memavail=3259320 print_time=18411.444 buffer_time=2.082 print_stall=0 extruder: target=210 temp=210.2 pwm=0.329
Stats 64378.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=51278533 bytes_read=8293912 bytes_retransmit=9 bytes_invalid=0 send_seq=989308 receive_seq=989308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007794 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112689 bytes_read=349000 bytes_retransmit=0 bytes_invalid=0 send_seq=18757 receive_seq=18757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998298 adj=49997363 sd_pos=946005 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.18 cputime=5720.050 memavail=3259452 print_time=18412.489 buffer_time=2.126 print_stall=0 extruder: target=210 temp=210.2 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64379.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51283673 bytes_read=8294630 bytes_retransmit=9 bytes_invalid=0 send_seq=989405 receive_seq=989405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=483 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112695 bytes_read=349016 bytes_retransmit=0 bytes_invalid=0 send_seq=18758 receive_seq=18758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998300 adj=49997416 sd_pos=946367 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.18 cputime=5720.367 memavail=3259452 print_time=18413.655 buffer_time=2.232 print_stall=0 extruder: target=210 temp=210.2 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64380.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51287166 bytes_read=8295196 bytes_retransmit=9 bytes_invalid=0 send_seq=989475 receive_seq=989475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1854 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112701 bytes_read=349032 bytes_retransmit=0 bytes_invalid=0 send_seq=18759 receive_seq=18759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998301 adj=49997463 sd_pos=947142 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.18 cputime=5720.560 memavail=3259452 print_time=18414.588 buffer_time=2.165 print_stall=0 extruder: target=210 temp=210.2 pwm=0.329
Stats 64381.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51291979 bytes_read=8295843 bytes_retransmit=9 bytes_invalid=0 send_seq=989564 receive_seq=989564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1472 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112707 bytes_read=349048 bytes_retransmit=0 bytes_invalid=0 send_seq=18760 receive_seq=18760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998302 adj=49997511 sd_pos=947255 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.18 cputime=5720.776 memavail=3259452 print_time=18415.624 buffer_time=2.201 print_stall=0 extruder: target=210 temp=210.1 pwm=0.387
Stats 64382.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51296779 bytes_read=8296514 bytes_retransmit=9 bytes_invalid=0 send_seq=989655 receive_seq=989655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112713 bytes_read=349064 bytes_retransmit=0 bytes_invalid=0 send_seq=18761 receive_seq=18761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998303 adj=49997522 sd_pos=947255 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.18 cputime=5720.968 memavail=3259452 print_time=18416.624 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.0 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64383.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51301735 bytes_read=8297201 bytes_retransmit=9 bytes_invalid=0 send_seq=989750 receive_seq=989750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112719 bytes_read=349093 bytes_retransmit=0 bytes_invalid=0 send_seq=18762 receive_seq=18762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998305 adj=49997538 sd_pos=947613 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.17 cputime=5721.120 memavail=3259452 print_time=18417.601 buffer_time=2.177 print_stall=0 extruder: target=210 temp=209.7 pwm=0.438
Stats 64384.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51304969 bytes_read=8297744 bytes_retransmit=9 bytes_invalid=0 send_seq=989815 receive_seq=989815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112725 bytes_read=349109 bytes_retransmit=0 bytes_invalid=0 send_seq=18763 receive_seq=18763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998306 adj=49997563 sd_pos=947613 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.17 cputime=5721.336 memavail=3259452 print_time=18418.601 buffer_time=2.177 print_stall=0 extruder: target=210 temp=209.6 pwm=0.438
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64385.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51309081 bytes_read=8298366 bytes_retransmit=9 bytes_invalid=0 send_seq=989896 receive_seq=989896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112731 bytes_read=349125 bytes_retransmit=0 bytes_invalid=0 send_seq=18764 receive_seq=18764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998307 adj=49997572 sd_pos=948045 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.17 cputime=5721.526 memavail=3259452 print_time=18419.517 buffer_time=2.092 print_stall=0 extruder: target=210 temp=209.6 pwm=0.438
Stats 64386.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51313253 bytes_read=8298992 bytes_retransmit=9 bytes_invalid=0 send_seq=989978 receive_seq=989978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=404 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112737 bytes_read=349141 bytes_retransmit=0 bytes_invalid=0 send_seq=18765 receive_seq=18765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998308 adj=49997603 sd_pos=948179 heater_bed: target=60 temp=60.0 pwm=0.049 sysload=0.17 cputime=5721.781 memavail=3259452 print_time=18420.560 buffer_time=2.135 print_stall=0 extruder: target=210 temp=209.6 pwm=0.438
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64387.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51317619 bytes_read=8299604 bytes_retransmit=9 bytes_invalid=0 send_seq=990060 receive_seq=990060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1388 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112743 bytes_read=349157 bytes_retransmit=0 bytes_invalid=0 send_seq=18766 receive_seq=18766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998309 adj=49997594 sd_pos=948883 heater_bed: target=60 temp=60.0 pwm=0.255 sysload=0.17 cputime=5721.959 memavail=3259464 print_time=18421.529 buffer_time=2.103 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
Stats 64388.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51322179 bytes_read=8300265 bytes_retransmit=9 bytes_invalid=0 send_seq=990146 receive_seq=990146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=558 freq=400007559 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112749 bytes_read=349186 bytes_retransmit=0 bytes_invalid=0 send_seq=18767 receive_seq=18767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998311 adj=49997597 sd_pos=948997 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.15 cputime=5722.178 memavail=3259468 print_time=18422.555 buffer_time=2.128 print_stall=0 extruder: target=210 temp=209.7 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64389.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51326370 bytes_read=8300888 bytes_retransmit=9 bytes_invalid=0 send_seq=990227 receive_seq=990227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007548 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112755 bytes_read=349202 bytes_retransmit=0 bytes_invalid=0 send_seq=18768 receive_seq=18768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998314 adj=49997594 sd_pos=949228 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.15 cputime=5722.387 memavail=3259468 print_time=18423.594 buffer_time=2.166 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64390.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51330986 bytes_read=8301556 bytes_retransmit=9 bytes_invalid=0 send_seq=990318 receive_seq=990318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007512 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112767 bytes_read=349234 bytes_retransmit=0 bytes_invalid=0 send_seq=18770 receive_seq=18770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998316 adj=49997599 sd_pos=949355 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.15 cputime=5722.547 memavail=3259468 print_time=18424.568 buffer_time=2.140 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
Stats 64391.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51334198 bytes_read=8302122 bytes_retransmit=9 bytes_invalid=0 send_seq=990385 receive_seq=990385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007499 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112773 bytes_read=349250 bytes_retransmit=0 bytes_invalid=0 send_seq=18771 receive_seq=18771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998318 adj=49997643 sd_pos=949400 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.15 cputime=5722.735 memavail=3259468 print_time=18425.568 buffer_time=2.140 print_stall=0 extruder: target=210 temp=210.3 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64392.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51338076 bytes_read=8302714 bytes_retransmit=9 bytes_invalid=0 send_seq=990463 receive_seq=990463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007481 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112779 bytes_read=349266 bytes_retransmit=0 bytes_invalid=0 send_seq=18772 receive_seq=18772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998319 adj=49997639 sd_pos=949733 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.15 cputime=5722.924 memavail=3259468 print_time=18426.439 buffer_time=2.010 print_stall=0 extruder: target=210 temp=210.4 pwm=0.325
Stats 64393.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51342690 bytes_read=8303363 bytes_retransmit=9 bytes_invalid=0 send_seq=990553 receive_seq=990553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=119 freq=400007470 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112785 bytes_read=349295 bytes_retransmit=0 bytes_invalid=0 send_seq=18773 receive_seq=18773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998321 adj=49997661 sd_pos=949833 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.22 cputime=5723.181 memavail=3259472 print_time=18427.486 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.4 pwm=0.325
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64394.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51347085 bytes_read=8303993 bytes_retransmit=9 bytes_invalid=0 send_seq=990630 receive_seq=990630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=1386 freq=400007467 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112791 bytes_read=349311 bytes_retransmit=0 bytes_invalid=0 send_seq=18774 receive_seq=18774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998323 adj=49997643 sd_pos=950571 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.22 cputime=5723.463 memavail=3259472 print_time=18428.674 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.4 pwm=0.325
Stats 64395.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51351777 bytes_read=8304645 bytes_retransmit=9 bytes_invalid=0 send_seq=990720 receive_seq=990720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007459 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112797 bytes_read=349327 bytes_retransmit=0 bytes_invalid=0 send_seq=18775 receive_seq=18775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998324 adj=49997591 sd_pos=950616 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.22 cputime=5723.662 memavail=3259472 print_time=18429.662 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.3 pwm=0.325
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64396.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51356963 bytes_read=8305357 bytes_retransmit=9 bytes_invalid=0 send_seq=990819 receive_seq=990819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=21 freq=400007452 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112803 bytes_read=349343 bytes_retransmit=0 bytes_invalid=0 send_seq=18776 receive_seq=18776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998327 adj=49997582 sd_pos=951049 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.22 cputime=5723.834 memavail=3259472 print_time=18430.675 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.2 pwm=0.378
Stats 64397.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51360135 bytes_read=8305888 bytes_retransmit=9 bytes_invalid=0 send_seq=990882 receive_seq=990882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=21 freq=400007456 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112809 bytes_read=349359 bytes_retransmit=0 bytes_invalid=0 send_seq=18777 receive_seq=18777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998328 adj=49997593 sd_pos=951049 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.22 cputime=5724.019 memavail=3259620 print_time=18431.675 buffer_time=2.205 print_stall=0 extruder: target=210 temp=210.0 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64398.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51364734 bytes_read=8306540 bytes_retransmit=9 bytes_invalid=0 send_seq=990972 receive_seq=990972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007464 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112815 bytes_read=349388 bytes_retransmit=0 bytes_invalid=0 send_seq=18778 receive_seq=18778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998333 adj=49997570 sd_pos=951425 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.20 cputime=5724.242 memavail=3259732 print_time=18432.797 buffer_time=2.298 print_stall=0 extruder: target=210 temp=209.8 pwm=0.435
Stats 64399.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51367969 bytes_read=8307103 bytes_retransmit=9 bytes_invalid=0 send_seq=991038 receive_seq=991038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112821 bytes_read=349404 bytes_retransmit=0 bytes_invalid=0 send_seq=18779 receive_seq=18779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998337 adj=49997566 sd_pos=951425 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.20 cputime=5724.478 memavail=3259732 print_time=18433.548 buffer_time=2.047 print_stall=0 extruder: target=210 temp=209.6 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64400.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51371815 bytes_read=8307694 bytes_retransmit=9 bytes_invalid=0 send_seq=991113 receive_seq=991113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2811 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112827 bytes_read=349420 bytes_retransmit=0 bytes_invalid=0 send_seq=18780 receive_seq=18780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998337 adj=49997343 sd_pos=952274 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.20 cputime=5724.713 memavail=3259732 print_time=18434.816 buffer_time=2.315 print_stall=0 extruder: target=210 temp=209.4 pwm=0.435
Stats 64401.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51376849 bytes_read=8308371 bytes_retransmit=9 bytes_invalid=0 send_seq=991208 receive_seq=991208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=416 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112833 bytes_read=349436 bytes_retransmit=0 bytes_invalid=0 send_seq=18781 receive_seq=18781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998337 adj=49997253 sd_pos=952274 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.20 cputime=5724.875 memavail=3259732 print_time=18435.566 buffer_time=2.064 print_stall=0 extruder: target=210 temp=209.4 pwm=0.435
Stats 64402.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51380725 bytes_read=8308973 bytes_retransmit=9 bytes_invalid=0 send_seq=991285 receive_seq=991285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112839 bytes_read=349452 bytes_retransmit=0 bytes_invalid=0 send_seq=18782 receive_seq=18782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998338 adj=49997291 sd_pos=952391 heater_bed: target=60 temp=60.0 pwm=0.239 sysload=0.20 cputime=5725.076 memavail=3259732 print_time=18436.596 buffer_time=2.094 print_stall=0 extruder: target=210 temp=209.4 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64403.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51386069 bytes_read=8309694 bytes_retransmit=9 bytes_invalid=0 send_seq=991386 receive_seq=991386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=21 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112845 bytes_read=349481 bytes_retransmit=0 bytes_invalid=0 send_seq=18783 receive_seq=18783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998338 adj=49997226 sd_pos=952824 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.19 cputime=5725.228 memavail=3259732 print_time=18437.600 buffer_time=2.097 print_stall=0 extruder: target=210 temp=209.4 pwm=0.465
Stats 64404.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51389381 bytes_read=8310236 bytes_retransmit=9 bytes_invalid=0 send_seq=991452 receive_seq=991452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=213 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112851 bytes_read=349497 bytes_retransmit=0 bytes_invalid=0 send_seq=18784 receive_seq=18784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998339 adj=49997292 sd_pos=952896 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.19 cputime=5725.468 memavail=3259732 print_time=18438.618 buffer_time=2.115 print_stall=0 extruder: target=210 temp=209.6 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64405.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51393555 bytes_read=8310863 bytes_retransmit=9 bytes_invalid=0 send_seq=991534 receive_seq=991534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112857 bytes_read=349513 bytes_retransmit=0 bytes_invalid=0 send_seq=18785 receive_seq=18785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998340 adj=49997361 sd_pos=953257 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.19 cputime=5725.635 memavail=3259732 print_time=18439.526 buffer_time=2.022 print_stall=0 extruder: target=210 temp=209.7 pwm=0.411
Stats 64406.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51397928 bytes_read=8311509 bytes_retransmit=9 bytes_invalid=0 send_seq=991620 receive_seq=991620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112863 bytes_read=349529 bytes_retransmit=0 bytes_invalid=0 send_seq=18786 receive_seq=18786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998342 adj=49997424 sd_pos=953323 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.19 cputime=5725.906 memavail=3259732 print_time=18440.533 buffer_time=2.028 print_stall=0 extruder: target=210 temp=210.0 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64407.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51402473 bytes_read=8312146 bytes_retransmit=9 bytes_invalid=0 send_seq=991707 receive_seq=991707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1573 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112869 bytes_read=349545 bytes_retransmit=0 bytes_invalid=0 send_seq=18787 receive_seq=18787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998345 adj=49997304 sd_pos=954102 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.19 cputime=5726.141 memavail=3259464 print_time=18441.759 buffer_time=2.221 print_stall=0 extruder: target=210 temp=210.2 pwm=0.358
Stats 64408.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51406950 bytes_read=8312807 bytes_retransmit=9 bytes_invalid=0 send_seq=991793 receive_seq=991793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=405 freq=400007719 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112875 bytes_read=349574 bytes_retransmit=0 bytes_invalid=0 send_seq=18788 receive_seq=18788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998345 adj=49997358 sd_pos=954102 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.25 cputime=5726.344 memavail=3259488 print_time=18442.759 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.4 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64409.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51411489 bytes_read=8313460 bytes_retransmit=9 bytes_invalid=0 send_seq=991880 receive_seq=991880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112881 bytes_read=349590 bytes_retransmit=0 bytes_invalid=0 send_seq=18789 receive_seq=18789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998346 adj=49997415 sd_pos=954427 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.25 cputime=5726.487 memavail=3259488 print_time=18443.733 buffer_time=2.184 print_stall=0 extruder: target=210 temp=210.5 pwm=0.358
Stats 64410.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51415596 bytes_read=8314082 bytes_retransmit=9 bytes_invalid=0 send_seq=991961 receive_seq=991961 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112887 bytes_read=349606 bytes_retransmit=0 bytes_invalid=0 send_seq=18790 receive_seq=18790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998347 adj=49997443 sd_pos=954455 heater_bed: target=60 temp=60.0 pwm=0.275 sysload=0.25 cputime=5726.718 memavail=3259488 print_time=18444.735 buffer_time=2.185 print_stall=0 extruder: target=210 temp=210.5 pwm=0.349
Stats 64411.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51419081 bytes_read=8314648 bytes_retransmit=9 bytes_invalid=0 send_seq=992031 receive_seq=992031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112893 bytes_read=349622 bytes_retransmit=0 bytes_invalid=0 send_seq=18791 receive_seq=18791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998347 adj=49997456 sd_pos=954546 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.25 cputime=5726.918 memavail=3259488 print_time=18445.742 buffer_time=2.191 print_stall=0 extruder: target=210 temp=210.5 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64412.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51423213 bytes_read=8315255 bytes_retransmit=9 bytes_invalid=0 send_seq=992112 receive_seq=992112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112899 bytes_read=349638 bytes_retransmit=0 bytes_invalid=0 send_seq=18792 receive_seq=18792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998347 adj=49997363 sd_pos=954836 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.25 cputime=5727.118 memavail=3259488 print_time=18446.619 buffer_time=2.068 print_stall=0 extruder: target=210 temp=210.5 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64413.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51427430 bytes_read=8315882 bytes_retransmit=9 bytes_invalid=0 send_seq=992194 receive_seq=992194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1057 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112905 bytes_read=349667 bytes_retransmit=0 bytes_invalid=0 send_seq=18793 receive_seq=18793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998349 adj=49997295 sd_pos=955554 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.23 cputime=5727.372 memavail=3259488 print_time=18447.708 buffer_time=2.156 print_stall=0 extruder: target=210 temp=210.4 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64414.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51431865 bytes_read=8316532 bytes_retransmit=9 bytes_invalid=0 send_seq=992278 receive_seq=992278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=831 freq=400007730 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112911 bytes_read=349683 bytes_retransmit=0 bytes_invalid=0 send_seq=18794 receive_seq=18794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998351 adj=49997380 sd_pos=955683 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.23 cputime=5727.541 memavail=3259492 print_time=18448.606 buffer_time=2.052 print_stall=0 extruder: target=210 temp=210.2 pwm=0.372
Stats 64415.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51436334 bytes_read=8317160 bytes_retransmit=9 bytes_invalid=0 send_seq=992364 receive_seq=992364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112917 bytes_read=349699 bytes_retransmit=0 bytes_invalid=0 send_seq=18795 receive_seq=18795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998355 adj=49997455 sd_pos=955828 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.23 cputime=5727.832 memavail=3259492 print_time=18449.625 buffer_time=2.072 print_stall=0 extruder: target=210 temp=210.0 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64416.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51441272 bytes_read=8317857 bytes_retransmit=9 bytes_invalid=0 send_seq=992460 receive_seq=992460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112923 bytes_read=349715 bytes_retransmit=0 bytes_invalid=0 send_seq=18796 receive_seq=18796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998355 adj=49997533 sd_pos=956232 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.23 cputime=5727.978 memavail=3259492 print_time=18450.604 buffer_time=2.049 print_stall=0 extruder: target=210 temp=209.9 pwm=0.423
Stats 64417.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51444444 bytes_read=8318398 bytes_retransmit=9 bytes_invalid=0 send_seq=992525 receive_seq=992525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112929 bytes_read=349731 bytes_retransmit=0 bytes_invalid=0 send_seq=18797 receive_seq=18797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998357 adj=49997559 sd_pos=956232 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.23 cputime=5728.164 memavail=3258236 print_time=18451.604 buffer_time=2.048 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64418.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51448819 bytes_read=8319030 bytes_retransmit=9 bytes_invalid=0 send_seq=992611 receive_seq=992611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112935 bytes_read=349760 bytes_retransmit=0 bytes_invalid=0 send_seq=18798 receive_seq=18798 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998358 adj=49997557 sd_pos=956573 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.37 cputime=5728.386 memavail=3258236 print_time=18452.727 buffer_time=2.171 print_stall=0 extruder: target=210 temp=209.6 pwm=0.423
Stats 64419.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51453121 bytes_read=8319683 bytes_retransmit=9 bytes_invalid=0 send_seq=992695 receive_seq=992695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=7 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112941 bytes_read=349776 bytes_retransmit=0 bytes_invalid=0 send_seq=18799 receive_seq=18799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998360 adj=49997554 sd_pos=956573 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.37 cputime=5728.637 memavail=3258236 print_time=18453.728 buffer_time=2.171 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64420.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51456568 bytes_read=8320244 bytes_retransmit=9 bytes_invalid=0 send_seq=992764 receive_seq=992764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2703 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112947 bytes_read=349792 bytes_retransmit=0 bytes_invalid=0 send_seq=18800 receive_seq=18800 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998360 adj=49997560 sd_pos=957420 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.37 cputime=5728.868 memavail=3258236 print_time=18454.772 buffer_time=2.214 print_stall=0 extruder: target=210 temp=209.6 pwm=0.403
Stats 64421.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51461385 bytes_read=8320876 bytes_retransmit=9 bytes_invalid=0 send_seq=992850 receive_seq=992850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=1241 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112953 bytes_read=349808 bytes_retransmit=0 bytes_invalid=0 send_seq=18801 receive_seq=18801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998361 adj=49997566 sd_pos=957590 heater_bed: target=60 temp=60.0 pwm=0.217 sysload=0.37 cputime=5729.086 memavail=3258236 print_time=18455.591 buffer_time=2.033 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
Stats 64422.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51465896 bytes_read=8321528 bytes_retransmit=9 bytes_invalid=0 send_seq=992937 receive_seq=992937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=112959 bytes_read=349824 bytes_retransmit=0 bytes_invalid=0 send_seq=18802 receive_seq=18802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998362 adj=49997606 sd_pos=957590 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.37 cputime=5729.285 memavail=3258236 print_time=18456.592 buffer_time=2.032 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64423.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51470922 bytes_read=8322214 bytes_retransmit=9 bytes_invalid=0 send_seq=993031 receive_seq=993031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112965 bytes_read=349853 bytes_retransmit=0 bytes_invalid=0 send_seq=18803 receive_seq=18803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998365 adj=49997459 sd_pos=957980 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.34 cputime=5729.434 memavail=3258236 print_time=18457.581 buffer_time=2.021 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
Stats 64424.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51474293 bytes_read=8322761 bytes_retransmit=9 bytes_invalid=0 send_seq=993100 receive_seq=993100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112971 bytes_read=349869 bytes_retransmit=0 bytes_invalid=0 send_seq=18804 receive_seq=18804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998366 adj=49997489 sd_pos=958125 heater_bed: target=60 temp=60.0 pwm=0.253 sysload=0.34 cputime=5729.628 memavail=3258236 print_time=18458.576 buffer_time=2.015 print_stall=0 extruder: target=210 temp=210.0 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64425.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51479275 bytes_read=8323466 bytes_retransmit=9 bytes_invalid=0 send_seq=993195 receive_seq=993195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112977 bytes_read=349885 bytes_retransmit=0 bytes_invalid=0 send_seq=18805 receive_seq=18805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998368 adj=49997364 sd_pos=958417 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.34 cputime=5729.862 memavail=3258236 print_time=18459.745 buffer_time=2.183 print_stall=0 extruder: target=210 temp=210.1 pwm=0.355
Stats 64426.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51483200 bytes_read=8324065 bytes_retransmit=9 bytes_invalid=0 send_seq=993272 receive_seq=993272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=866 freq=400007963 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112983 bytes_read=349901 bytes_retransmit=0 bytes_invalid=0 send_seq=18806 receive_seq=18806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998372 adj=49997281 sd_pos=958562 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.34 cputime=5730.191 memavail=3258236 print_time=18460.776 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.2 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64427.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51487661 bytes_read=8324692 bytes_retransmit=9 bytes_invalid=0 send_seq=993357 receive_seq=993357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1791 freq=400007930 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112989 bytes_read=349917 bytes_retransmit=0 bytes_invalid=0 send_seq=18807 receive_seq=18807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998374 adj=49997144 sd_pos=959386 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.34 cputime=5730.379 memavail=3257968 print_time=18461.826 buffer_time=2.214 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
Stats 64428.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51492444 bytes_read=8325364 bytes_retransmit=9 bytes_invalid=0 send_seq=993448 receive_seq=993448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=554 freq=400007904 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=112995 bytes_read=349946 bytes_retransmit=0 bytes_invalid=0 send_seq=18808 receive_seq=18808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998381 adj=49997257 sd_pos=959386 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.31 cputime=5730.586 memavail=3257992 print_time=18462.836 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.3 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64429.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51498028 bytes_read=8326116 bytes_retransmit=9 bytes_invalid=0 send_seq=993552 receive_seq=993552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=634 freq=400007887 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113001 bytes_read=349962 bytes_retransmit=0 bytes_invalid=0 send_seq=18809 receive_seq=18809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998384 adj=49997403 sd_pos=959770 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.31 cputime=5730.771 memavail=3257992 print_time=18464.079 buffer_time=2.422 print_stall=0 extruder: target=210 temp=210.2 pwm=0.362
Stats 64430.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51501063 bytes_read=8326648 bytes_retransmit=9 bytes_invalid=0 send_seq=993615 receive_seq=993615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007841 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113007 bytes_read=349978 bytes_retransmit=0 bytes_invalid=0 send_seq=18810 receive_seq=18810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998386 adj=49997467 sd_pos=959842 heater_bed: target=60 temp=60.0 pwm=0.018 sysload=0.31 cputime=5730.916 memavail=3257992 print_time=18464.797 buffer_time=2.139 print_stall=0 extruder: target=210 temp=210.1 pwm=0.362
Stats 64431.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51504967 bytes_read=8327249 bytes_retransmit=9 bytes_invalid=0 send_seq=993692 receive_seq=993692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=400007845 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113013 bytes_read=349994 bytes_retransmit=0 bytes_invalid=0 send_seq=18811 receive_seq=18811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998390 adj=49997554 sd_pos=959914 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.31 cputime=5731.162 memavail=3257992 print_time=18465.871 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.0 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64432.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51509641 bytes_read=8327906 bytes_retransmit=9 bytes_invalid=0 send_seq=993783 receive_seq=993783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007814 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113019 bytes_read=350010 bytes_retransmit=0 bytes_invalid=0 send_seq=18812 receive_seq=18812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998390 adj=49997566 sd_pos=960324 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.31 cputime=5731.370 memavail=3257992 print_time=18466.794 buffer_time=2.129 print_stall=0 extruder: target=210 temp=210.0 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64433.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51513201 bytes_read=8328478 bytes_retransmit=9 bytes_invalid=0 send_seq=993854 receive_seq=993854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2020 freq=400007795 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113025 bytes_read=350039 bytes_retransmit=0 bytes_invalid=0 send_seq=18813 receive_seq=18813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998394 adj=49997593 sd_pos=961095 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.29 cputime=5731.638 memavail=3257992 print_time=18467.935 buffer_time=2.269 print_stall=0 extruder: target=210 temp=209.9 pwm=0.406
Stats 64434.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51517937 bytes_read=8329160 bytes_retransmit=9 bytes_invalid=0 send_seq=993944 receive_seq=993944 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=707 freq=400007759 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113031 bytes_read=350055 bytes_retransmit=0 bytes_invalid=0 send_seq=18814 receive_seq=18814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998394 adj=49997619 sd_pos=961164 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.29 cputime=5731.808 memavail=3257992 print_time=18468.743 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.7 pwm=0.406
Stats 64435.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51521944 bytes_read=8329757 bytes_retransmit=9 bytes_invalid=0 send_seq=994023 receive_seq=994023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113037 bytes_read=350070 bytes_retransmit=0 bytes_invalid=0 send_seq=18815 receive_seq=18815 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998395 adj=49997673 sd_pos=961208 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.29 cputime=5732.006 memavail=3257992 print_time=18469.743 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.5 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64436.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51526454 bytes_read=8330405 bytes_retransmit=9 bytes_invalid=0 send_seq=994110 receive_seq=994110 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113043 bytes_read=350085 bytes_retransmit=0 bytes_invalid=0 send_seq=18816 receive_seq=18816 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998397 adj=49997691 sd_pos=961567 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.29 cputime=5732.204 memavail=3257992 print_time=18470.720 buffer_time=2.053 print_stall=0 extruder: target=210 temp=209.5 pwm=0.457
Stats 64437.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51529864 bytes_read=8330970 bytes_retransmit=9 bytes_invalid=0 send_seq=994180 receive_seq=994180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113049 bytes_read=350100 bytes_retransmit=0 bytes_invalid=0 send_seq=18817 receive_seq=18817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998397 adj=49997702 sd_pos=961658 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.29 cputime=5732.401 memavail=3257992 print_time=18471.722 buffer_time=2.054 print_stall=0 extruder: target=210 temp=209.5 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64438.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51534405 bytes_read=8331612 bytes_retransmit=9 bytes_invalid=0 send_seq=994268 receive_seq=994268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113055 bytes_read=350128 bytes_retransmit=0 bytes_invalid=0 send_seq=18818 receive_seq=18818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998398 adj=49997693 sd_pos=961953 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.27 cputime=5732.622 memavail=3258004 print_time=18472.843 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.5 pwm=0.457
Stats 64439.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51538672 bytes_read=8332270 bytes_retransmit=9 bytes_invalid=0 send_seq=994353 receive_seq=994353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=613 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113061 bytes_read=350143 bytes_retransmit=0 bytes_invalid=0 send_seq=18819 receive_seq=18819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998398 adj=49997671 sd_pos=962054 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.27 cputime=5732.890 memavail=3258004 print_time=18473.895 buffer_time=2.194 print_stall=0 extruder: target=210 temp=209.6 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64440.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51542736 bytes_read=8332871 bytes_retransmit=9 bytes_invalid=0 send_seq=994430 receive_seq=994430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1746 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113067 bytes_read=350159 bytes_retransmit=0 bytes_invalid=0 send_seq=18820 receive_seq=18820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998398 adj=49997662 sd_pos=962776 heater_bed: target=60 temp=60.0 pwm=0.262 sysload=0.27 cputime=5733.069 memavail=3258004 print_time=18474.913 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.8 pwm=0.402
Stats 64441.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51547605 bytes_read=8333533 bytes_retransmit=9 bytes_invalid=0 send_seq=994522 receive_seq=994522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=217 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113073 bytes_read=350175 bytes_retransmit=0 bytes_invalid=0 send_seq=18821 receive_seq=18821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998398 adj=49997649 sd_pos=962776 heater_bed: target=60 temp=60.0 pwm=0.048 sysload=0.27 cputime=5733.314 memavail=3258004 print_time=18475.913 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.9 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64442.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51552123 bytes_read=8334165 bytes_retransmit=9 bytes_invalid=0 send_seq=994605 receive_seq=994605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113079 bytes_read=350191 bytes_retransmit=0 bytes_invalid=0 send_seq=18822 receive_seq=18822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998399 adj=49997637 sd_pos=963246 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.27 cputime=5733.465 memavail=3258012 print_time=18476.887 buffer_time=2.179 print_stall=0 extruder: target=210 temp=210.1 pwm=0.347
Stats 64443.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51556092 bytes_read=8334787 bytes_retransmit=9 bytes_invalid=0 send_seq=994684 receive_seq=994684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007545 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113091 bytes_read=350236 bytes_retransmit=0 bytes_invalid=0 send_seq=18824 receive_seq=18824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998402 adj=49997636 sd_pos=963246 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.24 cputime=5733.645 memavail=3258012 print_time=18477.912 buffer_time=2.204 print_stall=0 extruder: target=210 temp=210.4 pwm=0.347
Stats 64444.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51559293 bytes_read=8335330 bytes_retransmit=9 bytes_invalid=0 send_seq=994749 receive_seq=994749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007525 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113097 bytes_read=350252 bytes_retransmit=0 bytes_invalid=0 send_seq=18825 receive_seq=18825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998402 adj=49997698 sd_pos=963334 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.24 cputime=5733.839 memavail=3258012 print_time=18478.913 buffer_time=2.205 print_stall=0 extruder: target=210 temp=210.5 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64445.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51563614 bytes_read=8335967 bytes_retransmit=9 bytes_invalid=0 send_seq=994833 receive_seq=994833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007515 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113103 bytes_read=350268 bytes_retransmit=0 bytes_invalid=0 send_seq=18826 receive_seq=18826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997693 sd_pos=963742 heater_bed: target=60 temp=60.0 pwm=0.278 sysload=0.24 cputime=5734.062 memavail=3258012 print_time=18479.795 buffer_time=2.086 print_stall=0 extruder: target=210 temp=210.5 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64446.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51567458 bytes_read=8336563 bytes_retransmit=9 bytes_invalid=0 send_seq=994909 receive_seq=994909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=768 freq=400007495 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113109 bytes_read=350284 bytes_retransmit=0 bytes_invalid=0 send_seq=18827 receive_seq=18827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997688 sd_pos=964451 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.24 cputime=5734.353 memavail=3258012 print_time=18480.827 buffer_time=2.117 print_stall=0 extruder: target=210 temp=210.6 pwm=0.340
Stats 64447.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51572424 bytes_read=8337246 bytes_retransmit=9 bytes_invalid=0 send_seq=995003 receive_seq=995003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=289 freq=400007583 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113115 bytes_read=350300 bytes_retransmit=0 bytes_invalid=0 send_seq=18828 receive_seq=18828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998404 adj=49997676 sd_pos=964451 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.24 cputime=5734.561 memavail=3258500 print_time=18481.958 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.5 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64448.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51576789 bytes_read=8337867 bytes_retransmit=9 bytes_invalid=0 send_seq=995088 receive_seq=995084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=0 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113121 bytes_read=350329 bytes_retransmit=0 bytes_invalid=0 send_seq=18829 receive_seq=18829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997500 sd_pos=964804 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.22 cputime=5734.758 memavail=3258524 print_time=18483.094 buffer_time=2.317 print_stall=0 extruder: target=210 temp=210.3 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64449.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51581204 bytes_read=8338530 bytes_retransmit=9 bytes_invalid=0 send_seq=995173 receive_seq=995173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=115 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113127 bytes_read=350345 bytes_retransmit=0 bytes_invalid=0 send_seq=18830 receive_seq=18830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997404 sd_pos=964999 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.22 cputime=5734.915 memavail=3258524 print_time=18483.984 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.2 pwm=0.402
Stats 64450.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51584502 bytes_read=8339067 bytes_retransmit=9 bytes_invalid=0 send_seq=995237 receive_seq=995237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113133 bytes_read=350361 bytes_retransmit=0 bytes_invalid=0 send_seq=18831 receive_seq=18831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997438 sd_pos=965071 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.22 cputime=5735.082 memavail=3258524 print_time=18484.803 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.0 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64451.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51589598 bytes_read=8339773 bytes_retransmit=9 bytes_invalid=0 send_seq=995335 receive_seq=995335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113139 bytes_read=350377 bytes_retransmit=0 bytes_invalid=0 send_seq=18832 receive_seq=18832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998403 adj=49997483 sd_pos=965470 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.22 cputime=5735.347 memavail=3258524 print_time=18485.941 buffer_time=2.154 print_stall=0 extruder: target=210 temp=209.8 pwm=0.402
Stats 64452.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51593419 bytes_read=8340355 bytes_retransmit=9 bytes_invalid=0 send_seq=995411 receive_seq=995411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=567 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113145 bytes_read=350393 bytes_retransmit=0 bytes_invalid=0 send_seq=18833 receive_seq=18833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998404 adj=49997502 sd_pos=965536 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.22 cputime=5735.623 memavail=3258524 print_time=18486.951 buffer_time=2.164 print_stall=0 extruder: target=210 temp=209.7 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64453.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51597573 bytes_read=8340962 bytes_retransmit=9 bytes_invalid=0 send_seq=995489 receive_seq=995489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=990 freq=400007564 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113151 bytes_read=350422 bytes_retransmit=0 bytes_invalid=0 send_seq=18834 receive_seq=18834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998404 adj=49997539 sd_pos=966275 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.21 cputime=5735.789 memavail=3258524 print_time=18487.887 buffer_time=2.099 print_stall=0 extruder: target=210 temp=209.7 pwm=0.437
Stats 64454.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51602232 bytes_read=8341614 bytes_retransmit=9 bytes_invalid=0 send_seq=995573 receive_seq=995573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007553 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113157 bytes_read=350438 bytes_retransmit=0 bytes_invalid=0 send_seq=18835 receive_seq=18835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998404 adj=49997504 sd_pos=966349 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.21 cputime=5736.001 memavail=3258524 print_time=18488.907 buffer_time=2.118 print_stall=0 extruder: target=210 temp=209.5 pwm=0.437
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64455.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51607106 bytes_read=8342281 bytes_retransmit=9 bytes_invalid=0 send_seq=995666 receive_seq=995666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=400007539 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113163 bytes_read=350454 bytes_retransmit=0 bytes_invalid=0 send_seq=18836 receive_seq=18836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998405 adj=49997513 sd_pos=966772 heater_bed: target=60 temp=60.0 pwm=0.208 sysload=0.21 cputime=5736.164 memavail=3258524 print_time=18489.982 buffer_time=2.193 print_stall=0 extruder: target=210 temp=209.5 pwm=0.437
Stats 64456.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51610863 bytes_read=8342868 bytes_retransmit=9 bytes_invalid=0 send_seq=995740 receive_seq=995740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007525 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113169 bytes_read=350470 bytes_retransmit=0 bytes_invalid=0 send_seq=18837 receive_seq=18837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998407 adj=49997533 sd_pos=966845 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.21 cputime=5736.399 memavail=3258524 print_time=18490.979 buffer_time=2.174 print_stall=0 extruder: target=210 temp=209.6 pwm=0.437
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64457.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51615212 bytes_read=8343496 bytes_retransmit=9 bytes_invalid=0 send_seq=995823 receive_seq=995823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007538 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=113175 bytes_read=350486 bytes_retransmit=0 bytes_invalid=0 send_seq=18838 receive_seq=18838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998408 adj=49997568 sd_pos=967201 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.21 cputime=5736.625 memavail=3259012 print_time=18492.100 buffer_time=2.294 print_stall=0 extruder: target=210 temp=209.7 pwm=0.410
Stats 64458.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51618684 bytes_read=8344051 bytes_retransmit=9 bytes_invalid=0 send_seq=995894 receive_seq=995894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007524 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113181 bytes_read=350515 bytes_retransmit=0 bytes_invalid=0 send_seq=18839 receive_seq=18839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998408 adj=49997539 sd_pos=967201 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.35 cputime=5736.827 memavail=3259036 print_time=18492.862 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.8 pwm=0.410
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64459.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51622307 bytes_read=8344649 bytes_retransmit=9 bytes_invalid=0 send_seq=995967 receive_seq=995967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2532 freq=400007508 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113187 bytes_read=350531 bytes_retransmit=0 bytes_invalid=0 send_seq=18840 receive_seq=18840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998410 adj=49997558 sd_pos=968531 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.35 cputime=5737.028 memavail=3259036 print_time=18494.101 buffer_time=2.293 print_stall=0 extruder: target=210 temp=210.0 pwm=0.358
Stats 64460.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51627361 bytes_read=8345335 bytes_retransmit=9 bytes_invalid=0 send_seq=996061 receive_seq=996061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=226 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113193 bytes_read=350547 bytes_retransmit=0 bytes_invalid=0 send_seq=18841 receive_seq=18841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998410 adj=49997578 sd_pos=970383 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.35 cputime=5737.085 memavail=3259036 print_time=18494.889 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.2 pwm=0.358
Stats 64461.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51631131 bytes_read=8345907 bytes_retransmit=9 bytes_invalid=0 send_seq=996135 receive_seq=996135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007555 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113199 bytes_read=350563 bytes_retransmit=0 bytes_invalid=0 send_seq=18842 receive_seq=18842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998410 adj=49997463 sd_pos=972909 heater_bed: target=60 temp=60.0 pwm=0.023 sysload=0.35 cputime=5737.137 memavail=3259036 print_time=18495.940 buffer_time=2.131 print_stall=0 extruder: target=210 temp=210.3 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64462.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51636282 bytes_read=8346599 bytes_retransmit=9 bytes_invalid=0 send_seq=996230 receive_seq=996230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=226 freq=400007535 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113205 bytes_read=350579 bytes_retransmit=0 bytes_invalid=0 send_seq=18843 receive_seq=18843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998411 adj=49997501 sd_pos=973414 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.35 cputime=5737.318 memavail=3259036 print_time=18496.936 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.3 pwm=0.358
Stats 64463.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51639702 bytes_read=8347160 bytes_retransmit=9 bytes_invalid=0 send_seq=996299 receive_seq=996299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=35 freq=400007513 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113211 bytes_read=350608 bytes_retransmit=0 bytes_invalid=0 send_seq=18844 receive_seq=18844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998412 adj=49997529 sd_pos=973459 heater_bed: target=60 temp=60.0 pwm=0.244 sysload=0.32 cputime=5737.523 memavail=3259036 print_time=18497.936 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64464.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51643593 bytes_read=8347758 bytes_retransmit=9 bytes_invalid=0 send_seq=996375 receive_seq=996375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007522 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113217 bytes_read=350624 bytes_retransmit=0 bytes_invalid=0 send_seq=18845 receive_seq=18845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998413 adj=49997572 sd_pos=973889 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.32 cputime=5737.699 memavail=3259036 print_time=18498.834 buffer_time=2.023 print_stall=0 extruder: target=210 temp=210.3 pwm=0.360
Stats 64465.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51648186 bytes_read=8348410 bytes_retransmit=9 bytes_invalid=0 send_seq=996462 receive_seq=996462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=105 freq=400007512 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113223 bytes_read=350640 bytes_retransmit=0 bytes_invalid=0 send_seq=18846 receive_seq=18846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998414 adj=49997557 sd_pos=973889 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.32 cputime=5737.963 memavail=3259036 print_time=18499.878 buffer_time=2.066 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64466.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51652625 bytes_read=8349036 bytes_retransmit=9 bytes_invalid=0 send_seq=996544 receive_seq=996544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1258 freq=400007498 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113229 bytes_read=350656 bytes_retransmit=0 bytes_invalid=0 send_seq=18847 receive_seq=18847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998414 adj=49997571 sd_pos=975896 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.32 cputime=5738.107 memavail=3259036 print_time=18501.043 buffer_time=2.229 print_stall=0 extruder: target=210 temp=210.2 pwm=0.360
Stats 64467.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51657064 bytes_read=8349658 bytes_retransmit=9 bytes_invalid=0 send_seq=996628 receive_seq=996628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=291 freq=400007516 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113235 bytes_read=350672 bytes_retransmit=0 bytes_invalid=0 send_seq=18848 receive_seq=18848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998418 adj=49997563 sd_pos=978061 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.32 cputime=5738.182 memavail=3265596 print_time=18502.057 buffer_time=2.243 print_stall=0 extruder: target=210 temp=210.1 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64468.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51660428 bytes_read=8350205 bytes_retransmit=9 bytes_invalid=0 send_seq=996695 receive_seq=996695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007534 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113241 bytes_read=350701 bytes_retransmit=0 bytes_invalid=0 send_seq=18849 receive_seq=18849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998423 adj=49997568 sd_pos=979594 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.30 cputime=5738.262 memavail=3264588 print_time=18502.905 buffer_time=2.089 print_stall=0 extruder: target=210 temp=210.0 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64469.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51665613 bytes_read=8350927 bytes_retransmit=9 bytes_invalid=0 send_seq=996793 receive_seq=996793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=210 freq=400007553 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113247 bytes_read=350717 bytes_retransmit=0 bytes_invalid=0 send_seq=18850 receive_seq=18850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998424 adj=49997589 sd_pos=979723 heater_bed: target=60 temp=60.0 pwm=0.041 sysload=0.30 cputime=5738.499 memavail=3262824 print_time=18504.042 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.8 pwm=0.406
Stats 64470.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51669347 bytes_read=8351514 bytes_retransmit=9 bytes_invalid=0 send_seq=996867 receive_seq=996867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=49 freq=400007559 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113253 bytes_read=350733 bytes_retransmit=0 bytes_invalid=0 send_seq=18851 receive_seq=18851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998426 adj=49997548 sd_pos=979793 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.30 cputime=5738.705 memavail=3264452 print_time=18505.063 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.7 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64471.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51674185 bytes_read=8352190 bytes_retransmit=9 bytes_invalid=0 send_seq=996959 receive_seq=996959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=238 freq=400007546 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113259 bytes_read=350749 bytes_retransmit=0 bytes_invalid=0 send_seq=18852 receive_seq=18852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998429 adj=49997549 sd_pos=980184 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.30 cputime=5738.932 memavail=3264592 print_time=18506.000 buffer_time=2.142 print_stall=0 extruder: target=210 temp=209.7 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64472.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51677648 bytes_read=8352732 bytes_retransmit=9 bytes_invalid=0 send_seq=997027 receive_seq=997027 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2134 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113265 bytes_read=350765 bytes_retransmit=0 bytes_invalid=0 send_seq=18853 receive_seq=18853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998431 adj=49997597 sd_pos=981053 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.30 cputime=5739.176 memavail=3264592 print_time=18507.108 buffer_time=2.251 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
Stats 64473.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51682819 bytes_read=8353424 bytes_retransmit=9 bytes_invalid=0 send_seq=997122 receive_seq=997122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=734 freq=400007523 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113271 bytes_read=350794 bytes_retransmit=0 bytes_invalid=0 send_seq=18854 receive_seq=18854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998432 adj=49997614 sd_pos=982779 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.27 cputime=5739.235 memavail=3264592 print_time=18507.951 buffer_time=2.092 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
Stats 64474.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51687212 bytes_read=8354076 bytes_retransmit=9 bytes_invalid=0 send_seq=997206 receive_seq=997206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=8 freq=400007529 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113277 bytes_read=350810 bytes_retransmit=0 bytes_invalid=0 send_seq=18855 receive_seq=18855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998436 adj=49997631 sd_pos=985050 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5739.343 memavail=3264592 print_time=18508.991 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64475.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51692181 bytes_read=8354753 bytes_retransmit=9 bytes_invalid=0 send_seq=997301 receive_seq=997301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=251 freq=400007519 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113283 bytes_read=350826 bytes_retransmit=0 bytes_invalid=0 send_seq=18856 receive_seq=18856 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998441 adj=49997637 sd_pos=986249 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.27 cputime=5739.492 memavail=3270632 print_time=18509.990 buffer_time=2.130 print_stall=0 extruder: target=210 temp=209.7 pwm=0.420
Stats 64476.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51695593 bytes_read=8355310 bytes_retransmit=9 bytes_invalid=0 send_seq=997369 receive_seq=997369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=498 freq=400007521 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113289 bytes_read=350842 bytes_retransmit=0 bytes_invalid=0 send_seq=18857 receive_seq=18857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998442 adj=49997693 sd_pos=986390 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.27 cputime=5739.759 memavail=3268636 print_time=18511.027 buffer_time=2.166 print_stall=0 extruder: target=210 temp=209.8 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64477.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51700656 bytes_read=8356006 bytes_retransmit=9 bytes_invalid=0 send_seq=997465 receive_seq=997465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=0 freq=400007527 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113295 bytes_read=350858 bytes_retransmit=0 bytes_invalid=0 send_seq=18858 receive_seq=18858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998444 adj=49997665 sd_pos=986745 heater_bed: target=60 temp=60.0 pwm=0.012 sysload=0.27 cputime=5739.989 memavail=3266620 print_time=18512.166 buffer_time=2.304 print_stall=0 extruder: target=210 temp=209.9 pwm=0.394
Stats 64478.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=51703971 bytes_read=8356548 bytes_retransmit=9 bytes_invalid=0 send_seq=997533 receive_seq=997533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007528 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113301 bytes_read=350887 bytes_retransmit=0 bytes_invalid=0 send_seq=18859 receive_seq=18859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998445 adj=49997634 sd_pos=986745 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.33 cputime=5740.186 memavail=3266400 print_time=18512.916 buffer_time=2.054 print_stall=0 extruder: target=210 temp=210.0 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64479.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51707636 bytes_read=8357141 bytes_retransmit=9 bytes_invalid=0 send_seq=997606 receive_seq=997606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2788 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113307 bytes_read=350903 bytes_retransmit=0 bytes_invalid=0 send_seq=18860 receive_seq=18860 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998445 adj=49997637 sd_pos=988015 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.33 cputime=5740.379 memavail=3266400 print_time=18514.136 buffer_time=2.273 print_stall=0 extruder: target=210 temp=210.1 pwm=0.394
Stats 64480.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51712610 bytes_read=8357777 bytes_retransmit=9 bytes_invalid=0 send_seq=997690 receive_seq=997690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=620 freq=400007527 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113313 bytes_read=350919 bytes_retransmit=0 bytes_invalid=0 send_seq=18861 receive_seq=18861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998444 adj=49997589 sd_pos=989619 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.33 cputime=5740.432 memavail=3265648 print_time=18514.918 buffer_time=2.054 print_stall=0 extruder: target=210 temp=210.2 pwm=0.368
Stats 64481.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51717033 bytes_read=8358399 bytes_retransmit=9 bytes_invalid=0 send_seq=997774 receive_seq=997774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007528 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113319 bytes_read=350935 bytes_retransmit=0 bytes_invalid=0 send_seq=18862 receive_seq=18862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998449 adj=49997587 sd_pos=991683 heater_bed: target=60 temp=60.0 pwm=0.011 sysload=0.33 cputime=5740.520 memavail=3265424 print_time=18515.978 buffer_time=2.113 print_stall=0 extruder: target=210 temp=210.3 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64482.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51721777 bytes_read=8359071 bytes_retransmit=9 bytes_invalid=0 send_seq=997865 receive_seq=997865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007528 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113325 bytes_read=350951 bytes_retransmit=0 bytes_invalid=0 send_seq=18863 receive_seq=18863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998457 adj=49997627 sd_pos=992600 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.33 cputime=5740.664 memavail=3264416 print_time=18516.953 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.3 pwm=0.368
Stats 64483.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51724957 bytes_read=8359572 bytes_retransmit=9 bytes_invalid=0 send_seq=997922 receive_seq=997922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007535 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=113331 bytes_read=350980 bytes_retransmit=0 bytes_invalid=0 send_seq=18864 receive_seq=18864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998457 adj=49997704 sd_pos=992646 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.38 cputime=5740.855 memavail=3263412 print_time=18517.953 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.3 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64484.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51729531 bytes_read=8360200 bytes_retransmit=9 bytes_invalid=0 send_seq=998012 receive_seq=998004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007517 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=113337 bytes_read=350996 bytes_retransmit=0 bytes_invalid=0 send_seq=18865 receive_seq=18865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998458 adj=49997668 sd_pos=992977 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.38 cputime=5741.086 memavail=3263172 print_time=18519.075 buffer_time=2.190 print_stall=0 extruder: target=210 temp=210.3 pwm=0.379
Stats 64485.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51733978 bytes_read=8360911 bytes_retransmit=9 bytes_invalid=0 send_seq=998100 receive_seq=998100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=524 freq=400007506 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=113343 bytes_read=351012 bytes_retransmit=0 bytes_invalid=0 send_seq=18866 receive_seq=18866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998457 adj=49997661 sd_pos=993114 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.38 cputime=5741.365 memavail=3263172 print_time=18520.139 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64486.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51737885 bytes_read=8361483 bytes_retransmit=9 bytes_invalid=0 send_seq=998174 receive_seq=998174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1316 freq=400007507 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=113349 bytes_read=351028 bytes_retransmit=0 bytes_invalid=0 send_seq=18867 receive_seq=18867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998457 adj=49997645 sd_pos=994631 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.38 cputime=5741.485 memavail=3263172 print_time=18521.065 buffer_time=2.121 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
Stats 64487.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51742325 bytes_read=8362070 bytes_retransmit=9 bytes_invalid=0 send_seq=998251 receive_seq=998251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007495 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=113355 bytes_read=351044 bytes_retransmit=0 bytes_invalid=0 send_seq=18868 receive_seq=18868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998457 adj=49997623 sd_pos=996445 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.51 cputime=5741.573 memavail=3263320 print_time=18522.091 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.1 pwm=0.379
Stats 64488.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=51745388 bytes_read=8362601 bytes_retransmit=9 bytes_invalid=0 send_seq=998311 receive_seq=998311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007517 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113361 bytes_read=351073 bytes_retransmit=0 bytes_invalid=0 send_seq=18869 receive_seq=18869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998462 adj=49997620 sd_pos=998138 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.51 cputime=5741.651 memavail=3268004 print_time=18523.117 buffer_time=2.171 print_stall=0 extruder: target=210 temp=210.0 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64489.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51749915 bytes_read=8363252 bytes_retransmit=9 bytes_invalid=0 send_seq=998398 receive_seq=998398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007513 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113367 bytes_read=351089 bytes_retransmit=0 bytes_invalid=0 send_seq=18870 receive_seq=18870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998465 adj=49997630 sd_pos=998909 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.51 cputime=5741.852 memavail=3266508 print_time=18524.090 buffer_time=2.143 print_stall=0 extruder: target=210 temp=210.0 pwm=0.416
Stats 64490.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51753118 bytes_read=8363791 bytes_retransmit=9 bytes_invalid=0 send_seq=998463 receive_seq=998463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007501 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113373 bytes_read=351105 bytes_retransmit=0 bytes_invalid=0 send_seq=18871 receive_seq=18871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998465 adj=49997650 sd_pos=998909 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.51 cputime=5742.039 memavail=3265500 print_time=18525.090 buffer_time=2.143 print_stall=0 extruder: target=210 temp=209.9 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64491.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51756974 bytes_read=8364387 bytes_retransmit=9 bytes_invalid=0 send_seq=998539 receive_seq=998539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007493 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113379 bytes_read=351121 bytes_retransmit=0 bytes_invalid=0 send_seq=18872 receive_seq=18872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998464 adj=49997642 sd_pos=999282 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.51 cputime=5742.213 memavail=3265500 print_time=18525.969 buffer_time=2.021 print_stall=0 extruder: target=210 temp=209.9 pwm=0.416
Stats 64492.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51761512 bytes_read=8365029 bytes_retransmit=9 bytes_invalid=0 send_seq=998627 receive_seq=998627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=400007489 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113385 bytes_read=351137 bytes_retransmit=0 bytes_invalid=0 send_seq=18873 receive_seq=18873 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998464 adj=49997637 sd_pos=999422 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.47 cputime=5742.471 memavail=3265500 print_time=18526.973 buffer_time=2.025 print_stall=0 extruder: target=210 temp=210.0 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64493.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51765927 bytes_read=8365666 bytes_retransmit=9 bytes_invalid=0 send_seq=998712 receive_seq=998711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1392 freq=400007483 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113391 bytes_read=351166 bytes_retransmit=0 bytes_invalid=0 send_seq=18874 receive_seq=18874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998463 adj=49997626 sd_pos=1001203 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.47 cputime=5742.628 memavail=3264784 print_time=18528.185 buffer_time=2.237 print_stall=0 extruder: target=210 temp=210.0 pwm=0.376
Stats 64494.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51769827 bytes_read=8366278 bytes_retransmit=9 bytes_invalid=0 send_seq=998787 receive_seq=998787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007486 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113397 bytes_read=351182 bytes_retransmit=0 bytes_invalid=0 send_seq=18875 receive_seq=18875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998462 adj=49997586 sd_pos=1002667 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.47 cputime=5742.682 memavail=3264784 print_time=18528.970 buffer_time=2.021 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
Stats 64495.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51772969 bytes_read=8366805 bytes_retransmit=9 bytes_invalid=0 send_seq=998852 receive_seq=998852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007511 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113403 bytes_read=351198 bytes_retransmit=0 bytes_invalid=0 send_seq=18876 receive_seq=18876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998466 adj=49997561 sd_pos=1004416 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.47 cputime=5742.749 memavail=3264788 print_time=18529.976 buffer_time=2.026 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64496.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51777936 bytes_read=8367462 bytes_retransmit=9 bytes_invalid=0 send_seq=998940 receive_seq=998940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007519 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113409 bytes_read=351214 bytes_retransmit=0 bytes_invalid=0 send_seq=18877 receive_seq=18877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998469 adj=49997565 sd_pos=1005396 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.47 cputime=5742.910 memavail=3264792 print_time=18531.027 buffer_time=2.077 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
Stats 64497.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51781537 bytes_read=8368043 bytes_retransmit=9 bytes_invalid=0 send_seq=999013 receive_seq=999013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007523 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113415 bytes_read=351230 bytes_retransmit=0 bytes_invalid=0 send_seq=18878 receive_seq=18878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998469 adj=49997582 sd_pos=1005467 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.43 cputime=5743.110 memavail=3264436 print_time=18532.043 buffer_time=2.092 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64498.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51786348 bytes_read=8368710 bytes_retransmit=9 bytes_invalid=0 send_seq=999106 receive_seq=999106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007524 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=113421 bytes_read=351246 bytes_retransmit=0 bytes_invalid=0 send_seq=18879 receive_seq=18879 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998469 adj=49997571 sd_pos=1005872 heater_bed: target=60 temp=60.0 pwm=0.314 sysload=0.43 cputime=5743.343 memavail=3264544 print_time=18533.188 buffer_time=2.236 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
Stats 64499.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51790249 bytes_read=8369328 bytes_retransmit=9 bytes_invalid=0 send_seq=999183 receive_seq=999183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=530 freq=400007520 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113427 bytes_read=351275 bytes_retransmit=0 bytes_invalid=0 send_seq=18880 receive_seq=18880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998469 adj=49997551 sd_pos=1005872 heater_bed: target=60 temp=60.0 pwm=0.309 sysload=0.43 cputime=5743.608 memavail=3264544 print_time=18534.188 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64500.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51794268 bytes_read=8369934 bytes_retransmit=9 bytes_invalid=0 send_seq=999262 receive_seq=999262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1909 freq=400007511 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113433 bytes_read=351291 bytes_retransmit=0 bytes_invalid=0 send_seq=18881 receive_seq=18881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998468 adj=49997556 sd_pos=1007140 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.43 cputime=5743.750 memavail=3264544 print_time=18535.118 buffer_time=2.118 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
Stats 64501.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51798976 bytes_read=8370580 bytes_retransmit=9 bytes_invalid=0 send_seq=999351 receive_seq=999351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=438 freq=400007538 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113439 bytes_read=351307 bytes_retransmit=0 bytes_invalid=0 send_seq=18882 receive_seq=18882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998467 adj=49997557 sd_pos=1008983 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.43 cputime=5743.822 memavail=3264544 print_time=18536.138 buffer_time=2.137 print_stall=0 extruder: target=210 temp=210.1 pwm=0.395
Stats 64502.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51802541 bytes_read=8371147 bytes_retransmit=9 bytes_invalid=0 send_seq=999421 receive_seq=999421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007540 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113445 bytes_read=351323 bytes_retransmit=0 bytes_invalid=0 send_seq=18883 receive_seq=18883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998468 adj=49997493 sd_pos=1010787 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.40 cputime=5743.906 memavail=3269408 print_time=18537.159 buffer_time=2.157 print_stall=0 extruder: target=210 temp=210.0 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64503.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51807656 bytes_read=8371853 bytes_retransmit=9 bytes_invalid=0 send_seq=999519 receive_seq=999519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400007528 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113451 bytes_read=351339 bytes_retransmit=0 bytes_invalid=0 send_seq=18884 receive_seq=18884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998469 adj=49997507 sd_pos=1011943 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.40 cputime=5744.011 memavail=3268948 print_time=18538.203 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.0 pwm=0.395
Stats 64504.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51810912 bytes_read=8372412 bytes_retransmit=9 bytes_invalid=0 send_seq=999585 receive_seq=999585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113463 bytes_read=351384 bytes_retransmit=0 bytes_invalid=0 send_seq=18886 receive_seq=18886 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998470 adj=49997553 sd_pos=1011989 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.40 cputime=5744.207 memavail=3267940 print_time=18539.203 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.0 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64505.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51815360 bytes_read=8373069 bytes_retransmit=9 bytes_invalid=0 send_seq=999673 receive_seq=999673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113469 bytes_read=351400 bytes_retransmit=0 bytes_invalid=0 send_seq=18887 receive_seq=18887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998470 adj=49997339 sd_pos=1012325 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.40 cputime=5744.429 memavail=3267944 print_time=18540.325 buffer_time=2.301 print_stall=0 extruder: target=210 temp=209.9 pwm=0.390
Stats 64506.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51818937 bytes_read=8373650 bytes_retransmit=9 bytes_invalid=0 send_seq=999746 receive_seq=999746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007756 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113475 bytes_read=351416 bytes_retransmit=0 bytes_invalid=0 send_seq=18888 receive_seq=18888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998470 adj=49997278 sd_pos=1012462 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.40 cputime=5744.646 memavail=3267944 print_time=18541.093 buffer_time=2.068 print_stall=0 extruder: target=210 temp=209.9 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64507.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51822376 bytes_read=8374197 bytes_retransmit=9 bytes_invalid=0 send_seq=999815 receive_seq=999815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2689 freq=400007740 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113481 bytes_read=351432 bytes_retransmit=0 bytes_invalid=0 send_seq=18889 receive_seq=18889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998471 adj=49997252 sd_pos=1013478 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.37 cputime=5744.844 memavail=3271760 print_time=18542.288 buffer_time=2.263 print_stall=0 extruder: target=210 temp=210.0 pwm=0.390
Stats 64508.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51827526 bytes_read=8374899 bytes_retransmit=9 bytes_invalid=0 send_seq=999912 receive_seq=999912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007730 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=113487 bytes_read=351448 bytes_retransmit=0 bytes_invalid=0 send_seq=18890 receive_seq=18890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998478 adj=49997367 sd_pos=1014534 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.37 cputime=5744.915 memavail=3270880 print_time=18543.088 buffer_time=2.061 print_stall=0 extruder: target=210 temp=210.0 pwm=0.390
Stats 64509.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51830340 bytes_read=8375416 bytes_retransmit=9 bytes_invalid=0 send_seq=999969 receive_seq=999969 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=113493 bytes_read=351477 bytes_retransmit=0 bytes_invalid=0 send_seq=18891 receive_seq=18891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998481 adj=49997478 sd_pos=1016041 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.37 cputime=5744.978 memavail=3270880 print_time=18544.154 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.0 pwm=0.401
Stats 64510.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51833125 bytes_read=8375913 bytes_retransmit=9 bytes_invalid=0 send_seq=1000028 receive_seq=1000028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=113499 bytes_read=351493 bytes_retransmit=0 bytes_invalid=0 send_seq=18892 receive_seq=18892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998485 adj=49997541 sd_pos=1017577 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.37 cputime=5745.047 memavail=3270880 print_time=18545.220 buffer_time=2.192 print_stall=0 extruder: target=210 temp=210.0 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64511.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51837761 bytes_read=8376598 bytes_retransmit=9 bytes_invalid=0 send_seq=1000120 receive_seq=1000120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=113505 bytes_read=351509 bytes_retransmit=0 bytes_invalid=0 send_seq=18893 receive_seq=18893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998484 adj=49997591 sd_pos=1018148 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.37 cputime=5745.219 memavail=3269384 print_time=18546.213 buffer_time=2.184 print_stall=0 extruder: target=210 temp=210.0 pwm=0.401
Stats 64512.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51840970 bytes_read=8377135 bytes_retransmit=9 bytes_invalid=0 send_seq=1000187 receive_seq=1000187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=113511 bytes_read=351525 bytes_retransmit=0 bytes_invalid=0 send_seq=18894 receive_seq=18894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998482 adj=49997593 sd_pos=1018148 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.34 cputime=5745.405 memavail=3268152 print_time=18547.213 buffer_time=2.184 print_stall=0 extruder: target=210 temp=210.0 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64513.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51844780 bytes_read=8377722 bytes_retransmit=9 bytes_invalid=0 send_seq=1000264 receive_seq=1000264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=113517 bytes_read=351541 bytes_retransmit=0 bytes_invalid=0 send_seq=18895 receive_seq=18895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998481 adj=49997557 sd_pos=1018478 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.34 cputime=5745.586 memavail=3268152 print_time=18548.085 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.1 pwm=0.377
Stats 64514.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51849028 bytes_read=8378384 bytes_retransmit=9 bytes_invalid=0 send_seq=1000347 receive_seq=1000347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113523 bytes_read=351570 bytes_retransmit=0 bytes_invalid=0 send_seq=18896 receive_seq=18896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998482 adj=49997580 sd_pos=1018549 heater_bed: target=60 temp=60.0 pwm=0.010 sysload=0.34 cputime=5745.850 memavail=3268152 print_time=18549.077 buffer_time=2.047 print_stall=0 extruder: target=210 temp=210.2 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64515.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51853497 bytes_read=8379021 bytes_retransmit=9 bytes_invalid=0 send_seq=1000434 receive_seq=1000434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=964 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113529 bytes_read=351586 bytes_retransmit=0 bytes_invalid=0 send_seq=18897 receive_seq=18897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998481 adj=49997578 sd_pos=1019929 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.34 cputime=5745.992 memavail=3268152 print_time=18550.074 buffer_time=2.044 print_stall=0 extruder: target=210 temp=210.3 pwm=0.377
Stats 64516.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51857399 bytes_read=8379608 bytes_retransmit=9 bytes_invalid=0 send_seq=1000511 receive_seq=1000511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113535 bytes_read=351602 bytes_retransmit=0 bytes_invalid=0 send_seq=18898 receive_seq=18898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998485 adj=49997589 sd_pos=1021413 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.34 cputime=5746.049 memavail=3267408 print_time=18551.137 buffer_time=2.105 print_stall=0 extruder: target=210 temp=210.4 pwm=0.377
Stats 64517.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51860286 bytes_read=8380149 bytes_retransmit=9 bytes_invalid=0 send_seq=1000573 receive_seq=1000573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113541 bytes_read=351618 bytes_retransmit=0 bytes_invalid=0 send_seq=18899 receive_seq=18899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998489 adj=49997613 sd_pos=1022954 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.31 cputime=5746.114 memavail=3266428 print_time=18552.199 buffer_time=2.167 print_stall=0 extruder: target=210 temp=210.4 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64518.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51863022 bytes_read=8380641 bytes_retransmit=9 bytes_invalid=0 send_seq=1000631 receive_seq=1000631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113547 bytes_read=351634 bytes_retransmit=0 bytes_invalid=0 send_seq=18900 receive_seq=18900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998497 adj=49997652 sd_pos=1024158 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.31 cputime=5746.172 memavail=3266428 print_time=18553.114 buffer_time=2.082 print_stall=0 extruder: target=210 temp=210.4 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64519.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=51867855 bytes_read=8381288 bytes_retransmit=9 bytes_invalid=0 send_seq=1000720 receive_seq=1000720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=113553 bytes_read=351663 bytes_retransmit=0 bytes_invalid=0 send_seq=18901 receive_seq=18901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998503 adj=49997721 sd_pos=1024333 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.31 cputime=5746.425 memavail=3266428 print_time=18554.046 buffer_time=2.012 print_stall=0 extruder: target=210 temp=210.4 pwm=0.353
Stats 64520.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51871583 bytes_read=8381910 bytes_retransmit=9 bytes_invalid=0 send_seq=1000795 receive_seq=1000795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=514 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=113559 bytes_read=351678 bytes_retransmit=0 bytes_invalid=0 send_seq=18902 receive_seq=18902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998502 adj=49997783 sd_pos=1024406 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.31 cputime=5746.668 memavail=3266428 print_time=18555.311 buffer_time=2.276 print_stall=0 extruder: target=210 temp=210.3 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64521.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51876280 bytes_read=8382555 bytes_retransmit=9 bytes_invalid=0 send_seq=1000884 receive_seq=1000884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=113565 bytes_read=351693 bytes_retransmit=0 bytes_invalid=0 send_seq=18903 receive_seq=18903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998500 adj=49997699 sd_pos=1024702 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.31 cputime=5746.903 memavail=3266428 print_time=18556.183 buffer_time=2.149 print_stall=0 extruder: target=210 temp=210.2 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64522.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51880140 bytes_read=8383134 bytes_retransmit=9 bytes_invalid=0 send_seq=1000960 receive_seq=1000960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1931 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=113571 bytes_read=351708 bytes_retransmit=0 bytes_invalid=0 send_seq=18904 receive_seq=18904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998498 adj=49997672 sd_pos=1025703 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.28 cputime=5747.150 memavail=3266428 print_time=18557.302 buffer_time=2.267 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
Stats 64523.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51884691 bytes_read=8383780 bytes_retransmit=9 bytes_invalid=0 send_seq=1001043 receive_seq=1001043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=627 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=113577 bytes_read=351723 bytes_retransmit=0 bytes_invalid=0 send_seq=18905 receive_seq=18905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998496 adj=49997640 sd_pos=1026813 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.28 cputime=5747.200 memavail=3266428 print_time=18558.198 buffer_time=2.162 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
Stats 64524.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51888234 bytes_read=8384337 bytes_retransmit=9 bytes_invalid=0 send_seq=1001114 receive_seq=1001114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113583 bytes_read=351751 bytes_retransmit=0 bytes_invalid=0 send_seq=18906 receive_seq=18906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998498 adj=49997628 sd_pos=1028229 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.28 cputime=5747.250 memavail=3266428 print_time=18559.256 buffer_time=2.220 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
Stats 64525.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51890411 bytes_read=8384795 bytes_retransmit=9 bytes_invalid=0 send_seq=1001162 receive_seq=1001162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113589 bytes_read=351767 bytes_retransmit=0 bytes_invalid=0 send_seq=18907 receive_seq=18907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998502 adj=49997648 sd_pos=1029310 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.28 cputime=5747.307 memavail=3266436 print_time=18560.050 buffer_time=2.014 print_stall=0 extruder: target=210 temp=209.8 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64526.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51895743 bytes_read=8385526 bytes_retransmit=9 bytes_invalid=0 send_seq=1001262 receive_seq=1001262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113595 bytes_read=351783 bytes_retransmit=0 bytes_invalid=0 send_seq=18908 receive_seq=18908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998506 adj=49997627 sd_pos=1030399 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.28 cputime=5747.479 memavail=3266436 print_time=18561.260 buffer_time=2.210 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
Stats 64527.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51898876 bytes_read=8386043 bytes_retransmit=9 bytes_invalid=0 send_seq=1001325 receive_seq=1001325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113601 bytes_read=351799 bytes_retransmit=0 bytes_invalid=0 send_seq=18909 receive_seq=18909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998505 adj=49997662 sd_pos=1030542 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.26 cputime=5747.652 memavail=3264924 print_time=18562.052 buffer_time=2.002 print_stall=0 extruder: target=210 temp=209.5 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64528.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51902533 bytes_read=8386610 bytes_retransmit=9 bytes_invalid=0 send_seq=1001395 receive_seq=1001395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113607 bytes_read=351815 bytes_retransmit=0 bytes_invalid=0 send_seq=18910 receive_seq=18910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998504 adj=49997666 sd_pos=1030832 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.26 cputime=5747.857 memavail=3264416 print_time=18563.155 buffer_time=2.104 print_stall=0 extruder: target=210 temp=209.4 pwm=0.428
Stats 64529.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51907787 bytes_read=8387337 bytes_retransmit=9 bytes_invalid=0 send_seq=1001494 receive_seq=1001494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=258 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113613 bytes_read=351844 bytes_retransmit=0 bytes_invalid=0 send_seq=18911 receive_seq=18911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998503 adj=49997633 sd_pos=1030973 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.26 cputime=5748.143 memavail=3264416 print_time=18564.219 buffer_time=2.167 print_stall=0 extruder: target=210 temp=209.5 pwm=0.417
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64530.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51911058 bytes_read=8387859 bytes_retransmit=9 bytes_invalid=0 send_seq=1001558 receive_seq=1001558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1970 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113619 bytes_read=351860 bytes_retransmit=0 bytes_invalid=0 send_seq=18912 receive_seq=18912 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998502 adj=49997590 sd_pos=1031976 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.26 cputime=5748.304 memavail=3264416 print_time=18565.206 buffer_time=2.153 print_stall=0 extruder: target=210 temp=209.6 pwm=0.417
Stats 64531.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51916005 bytes_read=8388536 bytes_retransmit=9 bytes_invalid=0 send_seq=1001650 receive_seq=1001650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113625 bytes_read=351876 bytes_retransmit=0 bytes_invalid=0 send_seq=18913 receive_seq=18913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998502 adj=49997582 sd_pos=1033454 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.26 cputime=5748.356 memavail=3264416 print_time=18566.261 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.7 pwm=0.366
Stats 64532.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51918263 bytes_read=8389003 bytes_retransmit=9 bytes_invalid=0 send_seq=1001701 receive_seq=1001701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113631 bytes_read=351892 bytes_retransmit=0 bytes_invalid=0 send_seq=18914 receive_seq=18914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998508 adj=49997596 sd_pos=1034618 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.24 cputime=5748.415 memavail=3264416 print_time=18567.052 buffer_time=1.999 print_stall=0 extruder: target=210 temp=210.0 pwm=0.366
Stats 64533.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51921044 bytes_read=8389495 bytes_retransmit=9 bytes_invalid=0 send_seq=1001759 receive_seq=1001759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113637 bytes_read=351908 bytes_retransmit=0 bytes_invalid=0 send_seq=18915 receive_seq=18915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998514 adj=49997689 sd_pos=1036130 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.24 cputime=5748.495 memavail=3264420 print_time=18568.107 buffer_time=2.051 print_stall=0 extruder: target=210 temp=210.0 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64534.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51926045 bytes_read=8390183 bytes_retransmit=9 bytes_invalid=0 send_seq=1001850 receive_seq=1001850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=113643 bytes_read=351937 bytes_retransmit=0 bytes_invalid=0 send_seq=18916 receive_seq=18916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998512 adj=49997722 sd_pos=1036664 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.24 cputime=5748.672 memavail=3264420 print_time=18569.110 buffer_time=2.054 print_stall=0 extruder: target=210 temp=210.1 pwm=0.366
Stats 64535.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51929391 bytes_read=8390744 bytes_retransmit=9 bytes_invalid=0 send_seq=1001919 receive_seq=1001919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=113649 bytes_read=351953 bytes_retransmit=0 bytes_invalid=0 send_seq=18917 receive_seq=18917 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998510 adj=49997656 sd_pos=1036753 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.24 cputime=5748.874 memavail=3263672 print_time=18570.120 buffer_time=2.063 print_stall=0 extruder: target=210 temp=210.1 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64536.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51934344 bytes_read=8391421 bytes_retransmit=9 bytes_invalid=0 send_seq=1002014 receive_seq=1002014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007719 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=113655 bytes_read=351969 bytes_retransmit=0 bytes_invalid=0 send_seq=18918 receive_seq=18918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998513 adj=49997639 sd_pos=1037118 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.24 cputime=5749.122 memavail=3263672 print_time=18571.284 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.1 pwm=0.364
Stats 64537.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51938223 bytes_read=8392023 bytes_retransmit=9 bytes_invalid=0 send_seq=1002091 receive_seq=1002091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=868 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=113661 bytes_read=351985 bytes_retransmit=0 bytes_invalid=0 send_seq=18919 receive_seq=18919 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998511 adj=49997459 sd_pos=1037186 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.30 cputime=5749.409 memavail=3263448 print_time=18572.282 buffer_time=2.193 print_stall=0 extruder: target=210 temp=210.1 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64538.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51942567 bytes_read=8392654 bytes_retransmit=9 bytes_invalid=0 send_seq=1002174 receive_seq=1002174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1069 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=113667 bytes_read=352001 bytes_retransmit=0 bytes_invalid=0 send_seq=18920 receive_seq=18920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998510 adj=49997473 sd_pos=1038647 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.30 cputime=5749.478 memavail=3263448 print_time=18573.244 buffer_time=2.153 print_stall=0 extruder: target=210 temp=210.2 pwm=0.364
Stats 64539.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51946654 bytes_read=8393256 bytes_retransmit=9 bytes_invalid=0 send_seq=1002254 receive_seq=1002254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007936 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113673 bytes_read=352030 bytes_retransmit=0 bytes_invalid=0 send_seq=18921 receive_seq=18921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998514 adj=49997441 sd_pos=1040133 heater_bed: target=60 temp=60.0 pwm=0.308 sysload=0.30 cputime=5749.537 memavail=3263448 print_time=18574.294 buffer_time=2.204 print_stall=0 extruder: target=210 temp=210.1 pwm=0.398
Stats 64540.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51949462 bytes_read=8393764 bytes_retransmit=9 bytes_invalid=0 send_seq=1002309 receive_seq=1002309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007921 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113679 bytes_read=352046 bytes_retransmit=0 bytes_invalid=0 send_seq=18922 receive_seq=18922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998517 adj=49997196 sd_pos=1041633 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.30 cputime=5749.607 memavail=3263448 print_time=18575.345 buffer_time=2.251 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64541.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51952915 bytes_read=8394330 bytes_retransmit=9 bytes_invalid=0 send_seq=1002379 receive_seq=1002379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007923 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113685 bytes_read=352062 bytes_retransmit=0 bytes_invalid=0 send_seq=18923 receive_seq=18923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997313 sd_pos=1042763 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.30 cputime=5749.700 memavail=3267920 print_time=18576.239 buffer_time=2.144 print_stall=0 extruder: target=210 temp=209.8 pwm=0.398
Stats 64542.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51957208 bytes_read=8394947 bytes_retransmit=9 bytes_invalid=0 send_seq=1002462 receive_seq=1002462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=400007905 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113691 bytes_read=352078 bytes_retransmit=0 bytes_invalid=0 send_seq=18924 receive_seq=18924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998518 adj=49997371 sd_pos=1042850 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.28 cputime=5749.907 memavail=3265012 print_time=18577.310 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64543.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51960712 bytes_read=8395519 bytes_retransmit=9 bytes_invalid=0 send_seq=1002534 receive_seq=1002534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007877 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=113697 bytes_read=352094 bytes_retransmit=0 bytes_invalid=0 send_seq=18925 receive_seq=18925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998516 adj=49997408 sd_pos=1043135 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.28 cputime=5750.117 memavail=3264284 print_time=18578.375 buffer_time=2.251 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
Stats 64544.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51964745 bytes_read=8396151 bytes_retransmit=9 bytes_invalid=0 send_seq=1002614 receive_seq=1002614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007860 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=113703 bytes_read=352123 bytes_retransmit=0 bytes_invalid=0 send_seq=18926 receive_seq=18926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998514 adj=49997459 sd_pos=1043135 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.28 cputime=5750.330 memavail=3263536 print_time=18579.182 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64545.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51968862 bytes_read=8396758 bytes_retransmit=9 bytes_invalid=0 send_seq=1002695 receive_seq=1002695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1113 freq=400007828 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=113709 bytes_read=352139 bytes_retransmit=0 bytes_invalid=0 send_seq=18927 receive_seq=18927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998513 adj=49997463 sd_pos=1044076 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.28 cputime=5750.538 memavail=3263536 print_time=18580.162 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
Stats 64546.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51973579 bytes_read=8397395 bytes_retransmit=9 bytes_invalid=0 send_seq=1002779 receive_seq=1002779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=112 freq=400007795 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=113715 bytes_read=352155 bytes_retransmit=0 bytes_invalid=0 send_seq=18928 receive_seq=18928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998514 adj=49997518 sd_pos=1045548 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.28 cputime=5750.600 memavail=3263536 print_time=18581.243 buffer_time=2.117 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
Stats 64547.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51976495 bytes_read=8397916 bytes_retransmit=9 bytes_invalid=0 send_seq=1002840 receive_seq=1002840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007812 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=113721 bytes_read=352171 bytes_retransmit=0 bytes_invalid=0 send_seq=18929 receive_seq=18929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998518 adj=49997584 sd_pos=1047031 heater_bed: target=60 temp=60.0 pwm=0.227 sysload=0.25 cputime=5750.668 memavail=3263536 print_time=18582.289 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.8 pwm=0.432
Stats 64548.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51979384 bytes_read=8398428 bytes_retransmit=9 bytes_invalid=0 send_seq=1002902 receive_seq=1002902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007794 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=113727 bytes_read=352187 bytes_retransmit=0 bytes_invalid=0 send_seq=18930 receive_seq=18930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998525 adj=49997596 sd_pos=1048450 heater_bed: target=60 temp=60.0 pwm=0.049 sysload=0.25 cputime=5750.735 memavail=3263536 print_time=18583.336 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.9 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64549.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51984232 bytes_read=8399145 bytes_retransmit=9 bytes_invalid=0 send_seq=1002996 receive_seq=1002996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007824 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113733 bytes_read=352216 bytes_retransmit=0 bytes_invalid=0 send_seq=18931 receive_seq=18931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998526 adj=49997693 sd_pos=1048951 heater_bed: target=60 temp=60.0 pwm=0.208 sysload=0.25 cputime=5750.985 memavail=3263296 print_time=18584.270 buffer_time=2.142 print_stall=0 extruder: target=210 temp=210.1 pwm=0.383
Stats 64550.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51987426 bytes_read=8399667 bytes_retransmit=9 bytes_invalid=0 send_seq=1003060 receive_seq=1003060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=400007822 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113739 bytes_read=352232 bytes_retransmit=0 bytes_invalid=0 send_seq=18932 receive_seq=18932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998524 adj=49997638 sd_pos=1048951 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.25 cputime=5751.176 memavail=3264036 print_time=18585.270 buffer_time=2.141 print_stall=0 extruder: target=210 temp=210.1 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64551.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51991406 bytes_read=8400259 bytes_retransmit=9 bytes_invalid=0 send_seq=1003138 receive_seq=1003138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007813 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113745 bytes_read=352248 bytes_retransmit=0 bytes_invalid=0 send_seq=18933 receive_seq=18933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998523 adj=49997608 sd_pos=1049303 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.25 cputime=5751.368 memavail=3264052 print_time=18586.157 buffer_time=2.027 print_stall=0 extruder: target=210 temp=210.3 pwm=0.383
Stats 64552.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=51995701 bytes_read=8400895 bytes_retransmit=9 bytes_invalid=0 send_seq=1003219 receive_seq=1003219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113751 bytes_read=352264 bytes_retransmit=0 bytes_invalid=0 send_seq=18934 receive_seq=18934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998522 adj=49997597 sd_pos=1049303 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.23 cputime=5751.620 memavail=3264052 print_time=18587.157 buffer_time=2.026 print_stall=0 extruder: target=210 temp=210.4 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64553.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52000219 bytes_read=8401516 bytes_retransmit=9 bytes_invalid=0 send_seq=1003303 receive_seq=1003303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1134 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113757 bytes_read=352280 bytes_retransmit=0 bytes_invalid=0 send_seq=18935 receive_seq=18935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997611 sd_pos=1050771 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.23 cputime=5751.731 memavail=3263548 print_time=18588.247 buffer_time=2.116 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
Stats 64554.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52004663 bytes_read=8402154 bytes_retransmit=9 bytes_invalid=0 send_seq=1003388 receive_seq=1003388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=39 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000018 bytes_write=113763 bytes_read=352309 bytes_retransmit=0 bytes_invalid=0 send_seq=18936 receive_seq=18936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998518 adj=49997597 sd_pos=1052262 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.23 cputime=5751.781 memavail=3263548 print_time=18589.320 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
Stats 64555.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52007589 bytes_read=8402695 bytes_retransmit=9 bytes_invalid=0 send_seq=1003450 receive_seq=1003450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000018 bytes_write=113769 bytes_read=352325 bytes_retransmit=0 bytes_invalid=0 send_seq=18937 receive_seq=18937 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998519 adj=49997594 sd_pos=1053738 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.23 cputime=5751.843 memavail=3263548 print_time=18590.382 buffer_time=2.250 print_stall=0 extruder: target=210 temp=210.4 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64556.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52010590 bytes_read=8403207 bytes_retransmit=9 bytes_invalid=0 send_seq=1003512 receive_seq=1003512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000018 bytes_write=113775 bytes_read=352341 bytes_retransmit=0 bytes_invalid=0 send_seq=18938 receive_seq=18938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997621 sd_pos=1054862 heater_bed: target=60 temp=60.0 pwm=0.010 sysload=0.23 cputime=5751.904 memavail=3263548 print_time=18591.247 buffer_time=2.115 print_stall=0 extruder: target=210 temp=210.3 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64557.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52015255 bytes_read=8403869 bytes_retransmit=9 bytes_invalid=0 send_seq=1003604 receive_seq=1003604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000018 bytes_write=113781 bytes_read=352357 bytes_retransmit=0 bytes_invalid=0 send_seq=18939 receive_seq=18939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997645 sd_pos=1055073 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.22 cputime=5752.119 memavail=3263056 print_time=18592.213 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.2 pwm=0.374
Stats 64558.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52018485 bytes_read=8404435 bytes_retransmit=9 bytes_invalid=0 send_seq=1003671 receive_seq=1003671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007735 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000018 bytes_write=113787 bytes_read=352373 bytes_retransmit=0 bytes_invalid=0 send_seq=18940 receive_seq=18940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997659 sd_pos=1055073 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.22 cputime=5752.307 memavail=3263056 print_time=18593.213 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.2 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64559.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52023628 bytes_read=8405138 bytes_retransmit=9 bytes_invalid=0 send_seq=1003768 receive_seq=1003768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=113793 bytes_read=352402 bytes_retransmit=0 bytes_invalid=0 send_seq=18941 receive_seq=18941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997599 sd_pos=1055433 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.22 cputime=5752.576 memavail=3263056 print_time=18594.348 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.0 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64560.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52027126 bytes_read=8405660 bytes_retransmit=9 bytes_invalid=0 send_seq=1003829 receive_seq=1003829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=627 freq=400007758 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=113799 bytes_read=352418 bytes_retransmit=0 bytes_invalid=0 send_seq=18942 receive_seq=18942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998520 adj=49997560 sd_pos=1056018 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.22 cputime=5752.784 memavail=3263056 print_time=18595.232 buffer_time=2.073 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64561.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52031877 bytes_read=8406331 bytes_retransmit=9 bytes_invalid=0 send_seq=1003920 receive_seq=1003920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=801 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=113805 bytes_read=352434 bytes_retransmit=0 bytes_invalid=0 send_seq=18943 receive_seq=18943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998519 adj=49997549 sd_pos=1057286 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.22 cputime=5752.843 memavail=3263056 print_time=18596.254 buffer_time=2.094 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
Stats 64562.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52036139 bytes_read=8406933 bytes_retransmit=9 bytes_invalid=0 send_seq=1004000 receive_seq=1004000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=113811 bytes_read=352450 bytes_retransmit=0 bytes_invalid=0 send_seq=18944 receive_seq=18944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998521 adj=49997579 sd_pos=1058769 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.20 cputime=5752.923 memavail=3263056 print_time=18597.347 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
Stats 64563.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52038990 bytes_read=8407445 bytes_retransmit=9 bytes_invalid=0 send_seq=1004059 receive_seq=1004059 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=0 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=113817 bytes_read=352466 bytes_retransmit=0 bytes_invalid=0 send_seq=18945 receive_seq=18945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998527 adj=49997606 sd_pos=1060198 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.20 cputime=5752.986 memavail=3263060 print_time=18598.385 buffer_time=2.224 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64564.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52043054 bytes_read=8408058 bytes_retransmit=9 bytes_invalid=0 send_seq=1004139 receive_seq=1004139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113823 bytes_read=352495 bytes_retransmit=0 bytes_invalid=0 send_seq=18946 receive_seq=18946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998529 adj=49997683 sd_pos=1061084 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.20 cputime=5753.138 memavail=3263060 print_time=18599.325 buffer_time=2.164 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
Stats 64565.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52046571 bytes_read=8408629 bytes_retransmit=9 bytes_invalid=0 send_seq=1004210 receive_seq=1004210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113829 bytes_read=352511 bytes_retransmit=0 bytes_invalid=0 send_seq=18947 receive_seq=18947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998526 adj=49997715 sd_pos=1061159 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.20 cputime=5753.337 memavail=3263060 print_time=18600.348 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64566.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52049448 bytes_read=8409156 bytes_retransmit=9 bytes_invalid=0 send_seq=1004272 receive_seq=1004272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113835 bytes_read=352527 bytes_retransmit=0 bytes_invalid=0 send_seq=18948 receive_seq=18948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998524 adj=49997648 sd_pos=1061450 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.20 cputime=5753.498 memavail=3263060 print_time=18601.173 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
Stats 64567.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52054701 bytes_read=8409867 bytes_retransmit=9 bytes_invalid=0 send_seq=1004371 receive_seq=1004371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=64 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113841 bytes_read=352543 bytes_retransmit=0 bytes_invalid=0 send_seq=18949 receive_seq=18949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998529 adj=49997621 sd_pos=1061568 heater_bed: target=60 temp=60.0 pwm=0.304 sysload=0.18 cputime=5753.789 memavail=3263060 print_time=18602.238 buffer_time=2.075 print_stall=0 extruder: target=210 temp=209.6 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64568.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52058491 bytes_read=8410439 bytes_retransmit=9 bytes_invalid=0 send_seq=1004445 receive_seq=1004445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1568 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113847 bytes_read=352559 bytes_retransmit=0 bytes_invalid=0 send_seq=18950 receive_seq=18950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998528 adj=49997693 sd_pos=1062668 heater_bed: target=60 temp=60.0 pwm=0.253 sysload=0.18 cputime=5753.934 memavail=3263068 print_time=18603.202 buffer_time=2.038 print_stall=0 extruder: target=210 temp=209.7 pwm=0.434
Stats 64569.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52063435 bytes_read=8411111 bytes_retransmit=9 bytes_invalid=0 send_seq=1004536 receive_seq=1004536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113853 bytes_read=352588 bytes_retransmit=0 bytes_invalid=0 send_seq=18951 receive_seq=18951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998527 adj=49997679 sd_pos=1064165 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.18 cputime=5753.985 memavail=3263068 print_time=18604.245 buffer_time=2.080 print_stall=0 extruder: target=210 temp=209.8 pwm=0.382
Stats 64570.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52066446 bytes_read=8411653 bytes_retransmit=9 bytes_invalid=0 send_seq=1004598 receive_seq=1004598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=0 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113859 bytes_read=352604 bytes_retransmit=0 bytes_invalid=0 send_seq=18952 receive_seq=18952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998531 adj=49997641 sd_pos=1065698 heater_bed: target=60 temp=60.0 pwm=0.026 sysload=0.18 cputime=5754.060 memavail=3263068 print_time=18605.300 buffer_time=2.134 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64571.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52070968 bytes_read=8412306 bytes_retransmit=9 bytes_invalid=0 send_seq=1004686 receive_seq=1004686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113871 bytes_read=352636 bytes_retransmit=0 bytes_invalid=0 send_seq=18954 receive_seq=18954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998534 adj=49997708 sd_pos=1067370 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.18 cputime=5754.113 memavail=3267172 print_time=18606.481 buffer_time=2.314 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64572.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52075299 bytes_read=8412943 bytes_retransmit=9 bytes_invalid=0 send_seq=1004770 receive_seq=1004770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=354 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113877 bytes_read=352652 bytes_retransmit=0 bytes_invalid=0 send_seq=18955 receive_seq=18955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998534 adj=49997758 sd_pos=1067442 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.17 cputime=5754.275 memavail=3265940 print_time=18607.409 buffer_time=2.209 print_stall=0 extruder: target=210 temp=210.2 pwm=0.382
Stats 64573.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52078634 bytes_read=8413489 bytes_retransmit=9 bytes_invalid=0 send_seq=1004836 receive_seq=1004836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=566 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=113883 bytes_read=352668 bytes_retransmit=0 bytes_invalid=0 send_seq=18956 receive_seq=18956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998532 adj=49997739 sd_pos=1067532 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.17 cputime=5754.476 memavail=3264932 print_time=18608.420 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.3 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64574.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52083315 bytes_read=8414152 bytes_retransmit=9 bytes_invalid=0 send_seq=1004925 receive_seq=1004925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113889 bytes_read=352697 bytes_retransmit=0 bytes_invalid=0 send_seq=18957 receive_seq=18957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998534 adj=49997701 sd_pos=1067794 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.17 cputime=5754.682 memavail=3264932 print_time=18609.292 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.4 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64575.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52087434 bytes_read=8414728 bytes_retransmit=9 bytes_invalid=0 send_seq=1004998 receive_seq=1004998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=911 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113895 bytes_read=352713 bytes_retransmit=0 bytes_invalid=0 send_seq=18958 receive_seq=18958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998534 adj=49997708 sd_pos=1068459 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.17 cputime=5754.954 memavail=3264932 print_time=18610.388 buffer_time=2.175 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64576.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52091895 bytes_read=8415369 bytes_retransmit=9 bytes_invalid=0 send_seq=1005083 receive_seq=1005083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1183 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113901 bytes_read=352729 bytes_retransmit=0 bytes_invalid=0 send_seq=18959 receive_seq=18959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998541 adj=49997671 sd_pos=1069773 heater_bed: target=60 temp=60.0 pwm=0.265 sysload=0.17 cputime=5755.061 memavail=3264932 print_time=18611.378 buffer_time=2.164 print_stall=0 extruder: target=210 temp=210.5 pwm=0.359
Stats 64577.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52096641 bytes_read=8416001 bytes_retransmit=9 bytes_invalid=0 send_seq=1005169 receive_seq=1005169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=80 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113907 bytes_read=352745 bytes_retransmit=0 bytes_invalid=0 send_seq=18960 receive_seq=18960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998543 adj=49997762 sd_pos=1071394 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.15 cputime=5755.152 memavail=3264688 print_time=18612.456 buffer_time=2.242 print_stall=0 extruder: target=210 temp=210.5 pwm=0.360
Stats 64578.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52098941 bytes_read=8416468 bytes_retransmit=9 bytes_invalid=0 send_seq=1005219 receive_seq=1005219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113913 bytes_read=352761 bytes_retransmit=0 bytes_invalid=0 send_seq=18961 receive_seq=18961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998546 adj=49997757 sd_pos=1072510 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.15 cputime=5755.199 memavail=3268832 print_time=18613.227 buffer_time=2.012 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64579.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52104478 bytes_read=8417194 bytes_retransmit=9 bytes_invalid=0 send_seq=1005321 receive_seq=1005321 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=0 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=113919 bytes_read=352790 bytes_retransmit=0 bytes_invalid=0 send_seq=18962 receive_seq=18962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998548 adj=49997797 sd_pos=1073843 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.15 cputime=5755.333 memavail=3268580 print_time=18614.445 buffer_time=2.228 print_stall=0 extruder: target=210 temp=210.2 pwm=0.360
Stats 64580.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52107979 bytes_read=8417782 bytes_retransmit=9 bytes_invalid=0 send_seq=1005392 receive_seq=1005392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=84 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=113925 bytes_read=352806 bytes_retransmit=0 bytes_invalid=0 send_seq=18963 receive_seq=18963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998548 adj=49997732 sd_pos=1074067 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.15 cputime=5755.545 memavail=3267824 print_time=18615.465 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.0 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64581.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52111302 bytes_read=8418338 bytes_retransmit=9 bytes_invalid=0 send_seq=1005460 receive_seq=1005460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=113931 bytes_read=352822 bytes_retransmit=0 bytes_invalid=0 send_seq=18964 receive_seq=18964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998549 adj=49997457 sd_pos=1074499 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.15 cputime=5755.719 memavail=3267572 print_time=18616.336 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.8 pwm=0.414
Stats 64582.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52116380 bytes_read=8419030 bytes_retransmit=9 bytes_invalid=0 send_seq=1005558 receive_seq=1005558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=43 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=113937 bytes_read=352838 bytes_retransmit=0 bytes_invalid=0 send_seq=18965 receive_seq=18965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998547 adj=49997504 sd_pos=1074616 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.22 cputime=5755.989 memavail=3267576 print_time=18617.356 buffer_time=2.095 print_stall=0 extruder: target=210 temp=209.8 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64583.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52119957 bytes_read=8419607 bytes_retransmit=9 bytes_invalid=0 send_seq=1005630 receive_seq=1005630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1973 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=113943 bytes_read=352854 bytes_retransmit=0 bytes_invalid=0 send_seq=18966 receive_seq=18966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998546 adj=49997531 sd_pos=1075644 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.22 cputime=5756.142 memavail=3266568 print_time=18618.349 buffer_time=2.088 print_stall=0 extruder: target=210 temp=209.7 pwm=0.414
Stats 64584.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52125157 bytes_read=8420329 bytes_retransmit=9 bytes_invalid=0 send_seq=1005728 receive_seq=1005728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=780 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113949 bytes_read=352883 bytes_retransmit=0 bytes_invalid=0 send_seq=18967 receive_seq=18967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998545 adj=49997575 sd_pos=1077391 heater_bed: target=60 temp=60.0 pwm=0.332 sysload=0.22 cputime=5756.209 memavail=3266316 print_time=18619.427 buffer_time=2.165 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
Stats 64585.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52128835 bytes_read=8420896 bytes_retransmit=9 bytes_invalid=0 send_seq=1005801 receive_seq=1005801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113955 bytes_read=352899 bytes_retransmit=0 bytes_invalid=0 send_seq=18968 receive_seq=18968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998545 adj=49997585 sd_pos=1078843 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.22 cputime=5756.293 memavail=3266084 print_time=18620.452 buffer_time=2.189 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64586.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52132498 bytes_read=8421473 bytes_retransmit=9 bytes_invalid=0 send_seq=1005874 receive_seq=1005874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113961 bytes_read=352915 bytes_retransmit=0 bytes_invalid=0 send_seq=18969 receive_seq=18969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997498 sd_pos=1080449 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.22 cputime=5756.369 memavail=3266336 print_time=18621.581 buffer_time=2.317 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64587.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52137087 bytes_read=8422134 bytes_retransmit=9 bytes_invalid=0 send_seq=1005963 receive_seq=1005963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113967 bytes_read=352931 bytes_retransmit=0 bytes_invalid=0 send_seq=18970 receive_seq=18970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997544 sd_pos=1080708 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.20 cputime=5756.529 memavail=3265580 print_time=18622.348 buffer_time=2.083 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
Stats 64588.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52140374 bytes_read=8422671 bytes_retransmit=9 bytes_invalid=0 send_seq=1006030 receive_seq=1006030 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=285 freq=400007754 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=113973 bytes_read=352947 bytes_retransmit=0 bytes_invalid=0 send_seq=18971 receive_seq=18971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998552 adj=49997594 sd_pos=1080959 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.20 cputime=5756.742 memavail=3265076 print_time=18623.397 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.8 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64589.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52144707 bytes_read=8423329 bytes_retransmit=9 bytes_invalid=0 send_seq=1006115 receive_seq=1006115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113979 bytes_read=352976 bytes_retransmit=0 bytes_invalid=0 send_seq=18972 receive_seq=18972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998549 adj=49997588 sd_pos=1081338 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.20 cputime=5756.931 memavail=3264068 print_time=18624.298 buffer_time=2.032 print_stall=0 extruder: target=210 temp=209.9 pwm=0.394
Stats 64590.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52148993 bytes_read=8423950 bytes_retransmit=9 bytes_invalid=0 send_seq=1006196 receive_seq=1006196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113985 bytes_read=352992 bytes_retransmit=0 bytes_invalid=0 send_seq=18973 receive_seq=18973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998548 adj=49997540 sd_pos=1081382 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.20 cputime=5757.204 memavail=3264068 print_time=18625.298 buffer_time=2.031 print_stall=0 extruder: target=210 temp=210.1 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64591.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52153579 bytes_read=8424597 bytes_retransmit=9 bytes_invalid=0 send_seq=1006285 receive_seq=1006285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=785 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113991 bytes_read=353008 bytes_retransmit=0 bytes_invalid=0 send_seq=18974 receive_seq=18974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998546 adj=49997564 sd_pos=1082826 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.20 cputime=5757.303 memavail=3264068 print_time=18626.277 buffer_time=2.009 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
Stats 64592.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52157274 bytes_read=8425164 bytes_retransmit=9 bytes_invalid=0 send_seq=1006355 receive_seq=1006355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=113997 bytes_read=353024 bytes_retransmit=0 bytes_invalid=0 send_seq=18975 receive_seq=18975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998547 adj=49997581 sd_pos=1084307 heater_bed: target=60 temp=60.0 pwm=0.004 sysload=0.19 cputime=5757.368 memavail=3263564 print_time=18627.296 buffer_time=2.027 print_stall=0 extruder: target=210 temp=210.5 pwm=0.327
Stats 64593.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52160818 bytes_read=8425735 bytes_retransmit=9 bytes_invalid=0 send_seq=1006426 receive_seq=1006426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=114003 bytes_read=353040 bytes_retransmit=0 bytes_invalid=0 send_seq=18976 receive_seq=18976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998547 adj=49997620 sd_pos=1085929 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.19 cputime=5757.421 memavail=3268160 print_time=18628.383 buffer_time=2.113 print_stall=0 extruder: target=210 temp=210.6 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64594.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52166038 bytes_read=8426448 bytes_retransmit=9 bytes_invalid=0 send_seq=1006525 receive_seq=1006525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114009 bytes_read=353069 bytes_retransmit=0 bytes_invalid=0 send_seq=18977 receive_seq=18977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998548 adj=49997626 sd_pos=1087175 heater_bed: target=60 temp=60.0 pwm=0.282 sysload=0.19 cputime=5757.496 memavail=3268160 print_time=18629.665 buffer_time=2.395 print_stall=0 extruder: target=210 temp=210.5 pwm=0.327
Stats 64595.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52169265 bytes_read=8426990 bytes_retransmit=9 bytes_invalid=0 send_seq=1006590 receive_seq=1006590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114015 bytes_read=353085 bytes_retransmit=0 bytes_invalid=0 send_seq=18978 receive_seq=18978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998548 adj=49997665 sd_pos=1087493 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.19 cputime=5757.667 memavail=3268160 print_time=18630.490 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.4 pwm=0.370
Stats 64596.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52172623 bytes_read=8427549 bytes_retransmit=9 bytes_invalid=0 send_seq=1006659 receive_seq=1006659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114021 bytes_read=353101 bytes_retransmit=0 bytes_invalid=0 send_seq=18979 receive_seq=18979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998549 adj=49997687 sd_pos=1087837 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.19 cputime=5757.836 memavail=3267152 print_time=18631.286 buffer_time=2.015 print_stall=0 extruder: target=210 temp=210.3 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64597.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52177490 bytes_read=8428213 bytes_retransmit=9 bytes_invalid=0 send_seq=1006752 receive_seq=1006752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=601 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114027 bytes_read=353117 bytes_retransmit=0 bytes_invalid=0 send_seq=18980 receive_seq=18980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998551 adj=49997730 sd_pos=1088248 heater_bed: target=60 temp=60.0 pwm=0.281 sysload=0.25 cputime=5758.122 memavail=3266656 print_time=18632.419 buffer_time=2.147 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64598.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52181429 bytes_read=8428815 bytes_retransmit=9 bytes_invalid=0 send_seq=1006829 receive_seq=1006829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1331 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114033 bytes_read=353133 bytes_retransmit=0 bytes_invalid=0 send_seq=18981 receive_seq=18981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998555 adj=49997754 sd_pos=1089000 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.25 cputime=5758.373 memavail=3265648 print_time=18633.338 buffer_time=2.065 print_stall=0 extruder: target=210 temp=209.9 pwm=0.424
Stats 64599.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52186646 bytes_read=8429537 bytes_retransmit=9 bytes_invalid=0 send_seq=1006927 receive_seq=1006927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114039 bytes_read=353162 bytes_retransmit=0 bytes_invalid=0 send_seq=18982 receive_seq=18982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997785 sd_pos=1090535 heater_bed: target=60 temp=60.0 pwm=0.338 sysload=0.25 cputime=5758.428 memavail=3265648 print_time=18634.375 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.6 pwm=0.424
Stats 64600.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52189515 bytes_read=8430034 bytes_retransmit=9 bytes_invalid=0 send_seq=1006986 receive_seq=1006986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114045 bytes_read=353178 bytes_retransmit=0 bytes_invalid=0 send_seq=18983 receive_seq=18983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998553 adj=49997710 sd_pos=1092067 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.25 cputime=5758.464 memavail=3265648 print_time=18635.409 buffer_time=2.136 print_stall=0 extruder: target=210 temp=209.6 pwm=0.424
Stats 64601.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52192772 bytes_read=8430586 bytes_retransmit=9 bytes_invalid=0 send_seq=1007053 receive_seq=1007053 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=0 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114051 bytes_read=353194 bytes_retransmit=0 bytes_invalid=0 send_seq=18984 receive_seq=18984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998552 adj=49997683 sd_pos=1093662 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.25 cputime=5758.500 memavail=3265648 print_time=18636.438 buffer_time=2.164 print_stall=0 extruder: target=210 temp=209.5 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64602.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52197793 bytes_read=8431282 bytes_retransmit=9 bytes_invalid=0 send_seq=1007149 receive_seq=1007149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114057 bytes_read=353210 bytes_retransmit=0 bytes_invalid=0 send_seq=18985 receive_seq=18985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997668 sd_pos=1094258 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.23 cputime=5758.618 memavail=3265648 print_time=18637.416 buffer_time=2.142 print_stall=0 extruder: target=210 temp=209.5 pwm=0.418
Stats 64603.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52201316 bytes_read=8431844 bytes_retransmit=9 bytes_invalid=0 send_seq=1007221 receive_seq=1007221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=309 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114063 bytes_read=353226 bytes_retransmit=0 bytes_invalid=0 send_seq=18986 receive_seq=18986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997683 sd_pos=1094617 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.23 cputime=5758.860 memavail=3265412 print_time=18638.523 buffer_time=2.248 print_stall=0 extruder: target=210 temp=209.5 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64604.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52206144 bytes_read=8432521 bytes_retransmit=9 bytes_invalid=0 send_seq=1007313 receive_seq=1007313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007582 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114069 bytes_read=353255 bytes_retransmit=0 bytes_invalid=0 send_seq=18987 receive_seq=18987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997673 sd_pos=1095093 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.23 cputime=5759.055 memavail=3265412 print_time=18639.431 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.6 pwm=0.418
Stats 64605.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52209728 bytes_read=8433113 bytes_retransmit=9 bytes_invalid=0 send_seq=1007385 receive_seq=1007385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=924 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114075 bytes_read=353271 bytes_retransmit=0 bytes_invalid=0 send_seq=18988 receive_seq=18988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998555 adj=49997652 sd_pos=1095165 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.23 cputime=5759.332 memavail=3265412 print_time=18640.449 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.7 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64606.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52214301 bytes_read=8433700 bytes_retransmit=9 bytes_invalid=0 send_seq=1007462 receive_seq=1007462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2026 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114081 bytes_read=353286 bytes_retransmit=0 bytes_invalid=0 send_seq=18989 receive_seq=18989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998554 adj=49997610 sd_pos=1096649 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.23 cputime=5759.432 memavail=3265412 print_time=18641.475 buffer_time=2.198 print_stall=0 extruder: target=210 temp=209.8 pwm=0.376
Stats 64607.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52219134 bytes_read=8434358 bytes_retransmit=9 bytes_invalid=0 send_seq=1007551 receive_seq=1007551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=114 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114087 bytes_read=353301 bytes_retransmit=0 bytes_invalid=0 send_seq=18990 receive_seq=18990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998553 adj=49997607 sd_pos=1098133 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.21 cputime=5759.483 memavail=3264184 print_time=18642.485 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.0 pwm=0.376
Stats 64608.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52221866 bytes_read=8434813 bytes_retransmit=9 bytes_invalid=0 send_seq=1007599 receive_seq=1007599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114093 bytes_read=353316 bytes_retransmit=0 bytes_invalid=0 send_seq=18991 receive_seq=18991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998553 adj=49997617 sd_pos=1099675 heater_bed: target=60 temp=60.0 pwm=0.230 sysload=0.21 cputime=5759.525 memavail=3264184 print_time=18643.497 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64609.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52225510 bytes_read=8435370 bytes_retransmit=9 bytes_invalid=0 send_seq=1007670 receive_seq=1007670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114099 bytes_read=353344 bytes_retransmit=0 bytes_invalid=0 send_seq=18992 receive_seq=18992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998558 adj=49997583 sd_pos=1100981 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.21 cputime=5759.601 memavail=3264436 print_time=18644.427 buffer_time=2.148 print_stall=0 extruder: target=210 temp=210.2 pwm=0.376
Stats 64611.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52230207 bytes_read=8436038 bytes_retransmit=9 bytes_invalid=0 send_seq=1007760 receive_seq=1007757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114105 bytes_read=353359 bytes_retransmit=0 bytes_invalid=0 send_seq=18993 receive_seq=18993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998560 adj=49997543 sd_pos=1101348 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.21 cputime=5759.854 memavail=3266200 print_time=18645.526 buffer_time=2.211 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64612.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52234281 bytes_read=8436639 bytes_retransmit=9 bytes_invalid=0 send_seq=1007834 receive_seq=1007834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=861 freq=400007709 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114111 bytes_read=353375 bytes_retransmit=0 bytes_invalid=0 send_seq=18994 receive_seq=18994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998560 adj=49997535 sd_pos=1101926 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.21 cputime=5760.083 memavail=3265444 print_time=18646.731 buffer_time=2.367 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
Stats 64613.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52238657 bytes_read=8437271 bytes_retransmit=9 bytes_invalid=0 send_seq=1007918 receive_seq=1007917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=182 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114117 bytes_read=353391 bytes_retransmit=0 bytes_invalid=0 send_seq=18995 receive_seq=18995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998561 adj=49997557 sd_pos=1102001 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.20 cputime=5760.297 memavail=3265204 print_time=18647.485 buffer_time=2.120 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64614.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52242264 bytes_read=8437847 bytes_retransmit=9 bytes_invalid=0 send_seq=1007989 receive_seq=1007989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2512 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114123 bytes_read=353407 bytes_retransmit=0 bytes_invalid=0 send_seq=18996 receive_seq=18996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998560 adj=49997546 sd_pos=1103185 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.20 cputime=5760.485 memavail=3264196 print_time=18648.668 buffer_time=2.304 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
Stats 64615.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52247185 bytes_read=8438530 bytes_retransmit=9 bytes_invalid=0 send_seq=1008082 receive_seq=1008082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114129 bytes_read=353436 bytes_retransmit=0 bytes_invalid=0 send_seq=18997 receive_seq=18997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998559 adj=49997570 sd_pos=1104299 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.20 cputime=5760.535 memavail=3264196 print_time=18649.423 buffer_time=2.058 print_stall=0 extruder: target=210 temp=210.3 pwm=0.369
Stats 64616.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52249936 bytes_read=8439037 bytes_retransmit=9 bytes_invalid=0 send_seq=1008140 receive_seq=1008140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007766 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114135 bytes_read=353452 bytes_retransmit=0 bytes_invalid=0 send_seq=18998 receive_seq=18998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998562 adj=49997564 sd_pos=1105716 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.20 cputime=5760.594 memavail=3264208 print_time=18650.428 buffer_time=2.063 print_stall=0 extruder: target=210 temp=210.1 pwm=0.369
Stats 64617.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52252853 bytes_read=8439558 bytes_retransmit=9 bytes_invalid=0 send_seq=1008201 receive_seq=1008201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007830 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114141 bytes_read=353468 bytes_retransmit=0 bytes_invalid=0 send_seq=18999 receive_seq=18999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998571 adj=49997509 sd_pos=1107241 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.20 cputime=5760.662 memavail=3268160 print_time=18651.437 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.0 pwm=0.426
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64618.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52257810 bytes_read=8440230 bytes_retransmit=9 bytes_invalid=0 send_seq=1008295 receive_seq=1008295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007874 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114147 bytes_read=353484 bytes_retransmit=0 bytes_invalid=0 send_seq=19000 receive_seq=19000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998574 adj=49997536 sd_pos=1107998 heater_bed: target=60 temp=60.0 pwm=0.241 sysload=0.18 cputime=5760.828 memavail=3268448 print_time=18652.405 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.7 pwm=0.426
Stats 64619.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52261604 bytes_read=8440782 bytes_retransmit=9 bytes_invalid=0 send_seq=1008363 receive_seq=1008363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=491 freq=400007846 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114153 bytes_read=353500 bytes_retransmit=0 bytes_invalid=0 send_seq=19001 receive_seq=19001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998573 adj=49997512 sd_pos=1108270 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.18 cputime=5761.049 memavail=3267696 print_time=18653.501 buffer_time=2.133 print_stall=0 extruder: target=210 temp=209.7 pwm=0.426
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64620.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52266173 bytes_read=8441454 bytes_retransmit=9 bytes_invalid=0 send_seq=1008451 receive_seq=1008451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007834 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114159 bytes_read=353529 bytes_retransmit=0 bytes_invalid=0 send_seq=19002 receive_seq=19002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998572 adj=49997568 sd_pos=1108718 heater_bed: target=60 temp=60.0 pwm=0.013 sysload=0.18 cputime=5761.247 memavail=3267696 print_time=18654.384 buffer_time=2.015 print_stall=0 extruder: target=210 temp=209.6 pwm=0.426
Stats 64621.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52270550 bytes_read=8442081 bytes_retransmit=9 bytes_invalid=0 send_seq=1008536 receive_seq=1008536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007838 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114165 bytes_read=353545 bytes_retransmit=0 bytes_invalid=0 send_seq=19003 receive_seq=19003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998575 adj=49997580 sd_pos=1108792 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.18 cputime=5761.526 memavail=3266688 print_time=18655.388 buffer_time=2.019 print_stall=0 extruder: target=210 temp=209.6 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64622.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52275076 bytes_read=8442733 bytes_retransmit=9 bytes_invalid=0 send_seq=1008623 receive_seq=1008623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1442 freq=400007806 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114171 bytes_read=353561 bytes_retransmit=0 bytes_invalid=0 send_seq=19004 receive_seq=19004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998574 adj=49997615 sd_pos=1110653 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.18 cputime=5761.623 memavail=3266688 print_time=18656.609 buffer_time=2.240 print_stall=0 extruder: target=210 temp=209.7 pwm=0.382
Stats 64623.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52278869 bytes_read=8443319 bytes_retransmit=9 bytes_invalid=0 send_seq=1008697 receive_seq=1008697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007789 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114177 bytes_read=353577 bytes_retransmit=0 bytes_invalid=0 send_seq=19005 receive_seq=19005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998573 adj=49997637 sd_pos=1111807 heater_bed: target=60 temp=60.0 pwm=0.053 sysload=0.16 cputime=5761.680 memavail=3266688 print_time=18657.400 buffer_time=2.030 print_stall=0 extruder: target=210 temp=209.9 pwm=0.382
Stats 64624.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52281811 bytes_read=8443826 bytes_retransmit=9 bytes_invalid=0 send_seq=1008758 receive_seq=1008758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007788 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114183 bytes_read=353593 bytes_retransmit=0 bytes_invalid=0 send_seq=19006 receive_seq=19006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998578 adj=49997652 sd_pos=1113374 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.16 cputime=5761.750 memavail=3268456 print_time=18658.451 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.0 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64625.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52285281 bytes_read=8444409 bytes_retransmit=9 bytes_invalid=0 send_seq=1008828 receive_seq=1008828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114189 bytes_read=353622 bytes_retransmit=0 bytes_invalid=0 send_seq=19007 receive_seq=19007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998585 adj=49997709 sd_pos=1114547 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.16 cputime=5761.834 memavail=3270448 print_time=18659.386 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
Stats 64626.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52289659 bytes_read=8445050 bytes_retransmit=9 bytes_invalid=0 send_seq=1008913 receive_seq=1008913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007920 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114195 bytes_read=353638 bytes_retransmit=0 bytes_invalid=0 send_seq=19008 receive_seq=19008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998596 adj=49997825 sd_pos=1114867 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.16 cputime=5762.093 memavail=3269440 print_time=18660.444 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.1 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64627.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52294522 bytes_read=8445727 bytes_retransmit=9 bytes_invalid=0 send_seq=1009008 receive_seq=1009008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=78 freq=400007891 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114201 bytes_read=353654 bytes_retransmit=0 bytes_invalid=0 send_seq=19009 receive_seq=19009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998595 adj=49997669 sd_pos=1115500 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.16 cputime=5762.316 memavail=3269440 print_time=18661.630 buffer_time=2.257 print_stall=0 extruder: target=210 temp=210.1 pwm=0.371
Stats 64628.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52298321 bytes_read=8446314 bytes_retransmit=9 bytes_invalid=0 send_seq=1009082 receive_seq=1009082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007861 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114207 bytes_read=353670 bytes_retransmit=0 bytes_invalid=0 send_seq=19010 receive_seq=19010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998594 adj=49997683 sd_pos=1115573 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.15 cputime=5762.540 memavail=3267456 print_time=18662.392 buffer_time=2.018 print_stall=0 extruder: target=210 temp=210.2 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64629.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52302041 bytes_read=8446898 bytes_retransmit=9 bytes_invalid=0 send_seq=1009156 receive_seq=1009156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2157 freq=400007849 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114213 bytes_read=353686 bytes_retransmit=0 bytes_invalid=0 send_seq=19011 receive_seq=19011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998593 adj=49997714 sd_pos=1116938 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.15 cputime=5762.733 memavail=3267456 print_time=18663.574 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.2 pwm=0.371
Stats 64630.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52306735 bytes_read=8447559 bytes_retransmit=9 bytes_invalid=0 send_seq=1009245 receive_seq=1009245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007817 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114219 bytes_read=353715 bytes_retransmit=0 bytes_invalid=0 send_seq=19012 receive_seq=19012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998591 adj=49997690 sd_pos=1118192 heater_bed: target=60 temp=60.0 pwm=0.010 sysload=0.15 cputime=5762.779 memavail=3267216 print_time=18664.390 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.3 pwm=0.371
Stats 64631.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52309639 bytes_read=8448081 bytes_retransmit=9 bytes_invalid=0 send_seq=1009306 receive_seq=1009306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114225 bytes_read=353731 bytes_retransmit=0 bytes_invalid=0 send_seq=19013 receive_seq=19013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998595 adj=49997719 sd_pos=1119816 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.15 cputime=5762.833 memavail=3267216 print_time=18665.444 buffer_time=2.068 print_stall=0 extruder: target=210 temp=210.2 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64632.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52313845 bytes_read=8448707 bytes_retransmit=9 bytes_invalid=0 send_seq=1009388 receive_seq=1009388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114231 bytes_read=353747 bytes_retransmit=0 bytes_invalid=0 send_seq=19014 receive_seq=19014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998597 adj=49997781 sd_pos=1121381 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.15 cputime=5762.938 memavail=3267216 print_time=18666.575 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.1 pwm=0.362
Stats 64633.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52318014 bytes_read=8449329 bytes_retransmit=9 bytes_invalid=0 send_seq=1009472 receive_seq=1009472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114237 bytes_read=353763 bytes_retransmit=0 bytes_invalid=0 send_seq=19015 receive_seq=19015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998594 adj=49997788 sd_pos=1121610 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.14 cputime=5763.097 memavail=3266992 print_time=18667.495 buffer_time=2.117 print_stall=0 extruder: target=210 temp=210.0 pwm=0.421
Stats 64634.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52321809 bytes_read=8449921 bytes_retransmit=9 bytes_invalid=0 send_seq=1009548 receive_seq=1009547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=430 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114249 bytes_read=353795 bytes_retransmit=0 bytes_invalid=0 send_seq=19017 receive_seq=19017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998593 adj=49997794 sd_pos=1121976 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.14 cputime=5763.313 memavail=3266996 print_time=18668.559 buffer_time=2.170 print_stall=0 extruder: target=210 temp=209.9 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64635.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52326711 bytes_read=8450639 bytes_retransmit=9 bytes_invalid=0 send_seq=1009642 receive_seq=1009642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=170 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114255 bytes_read=353824 bytes_retransmit=0 bytes_invalid=0 send_seq=19018 receive_seq=19018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998593 adj=49997841 sd_pos=1122547 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.14 cputime=5763.551 memavail=3266996 print_time=18669.478 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.7 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64636.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52330519 bytes_read=8451211 bytes_retransmit=9 bytes_invalid=0 send_seq=1009716 receive_seq=1009716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3572 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114261 bytes_read=353840 bytes_retransmit=0 bytes_invalid=0 send_seq=19019 receive_seq=19019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998592 adj=49997851 sd_pos=1123666 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.14 cputime=5763.804 memavail=3266996 print_time=18670.752 buffer_time=2.362 print_stall=0 extruder: target=210 temp=209.7 pwm=0.421
Stats 64637.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52335492 bytes_read=8451898 bytes_retransmit=9 bytes_invalid=0 send_seq=1009810 receive_seq=1009810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1076 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114267 bytes_read=353856 bytes_retransmit=0 bytes_invalid=0 send_seq=19020 receive_seq=19020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998597 adj=49997783 sd_pos=1124844 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.14 cputime=5763.857 memavail=3266996 print_time=18671.531 buffer_time=2.140 print_stall=0 extruder: target=210 temp=209.7 pwm=0.421
Stats 64638.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52339455 bytes_read=8452459 bytes_retransmit=9 bytes_invalid=0 send_seq=1009879 receive_seq=1009879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114273 bytes_read=353872 bytes_retransmit=0 bytes_invalid=0 send_seq=19021 receive_seq=19021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998603 adj=49997838 sd_pos=1126434 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.13 cputime=5763.940 memavail=3265892 print_time=18672.582 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.7 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64639.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52342574 bytes_read=8452916 bytes_retransmit=9 bytes_invalid=0 send_seq=1009942 receive_seq=1009930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=495 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114279 bytes_read=353888 bytes_retransmit=0 bytes_invalid=0 send_seq=19022 receive_seq=19022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998607 adj=49997873 sd_pos=1128118 heater_bed: target=60 temp=60.0 pwm=0.234 sysload=0.13 cputime=5764.020 memavail=3269992 print_time=18673.779 buffer_time=2.377 print_stall=0 extruder: target=210 temp=209.7 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64640.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52347620 bytes_read=8453663 bytes_retransmit=9 bytes_invalid=0 send_seq=1010038 receive_seq=1010031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=114285 bytes_read=353917 bytes_retransmit=0 bytes_invalid=0 send_seq=19023 receive_seq=19023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998609 adj=49997816 sd_pos=1128600 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.13 cputime=5764.305 memavail=3269992 print_time=18674.668 buffer_time=2.224 print_stall=0 extruder: target=210 temp=209.8 pwm=0.420
Stats 64641.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52351035 bytes_read=8454225 bytes_retransmit=9 bytes_invalid=0 send_seq=1010103 receive_seq=1010103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=71 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=114291 bytes_read=353933 bytes_retransmit=0 bytes_invalid=0 send_seq=19024 receive_seq=19024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998607 adj=49997820 sd_pos=1128828 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.13 cputime=5764.477 memavail=3269752 print_time=18675.572 buffer_time=2.128 print_stall=0 extruder: target=210 temp=209.8 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64642.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52355681 bytes_read=8454877 bytes_retransmit=9 bytes_invalid=0 send_seq=1010193 receive_seq=1010193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=114297 bytes_read=353949 bytes_retransmit=0 bytes_invalid=0 send_seq=19025 receive_seq=19025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998607 adj=49997819 sd_pos=1129200 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.13 cputime=5764.677 memavail=3268744 print_time=18676.502 buffer_time=2.057 print_stall=0 extruder: target=210 temp=210.0 pwm=0.381
Stats 64643.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52359688 bytes_read=8455498 bytes_retransmit=9 bytes_invalid=0 send_seq=1010271 receive_seq=1010271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1495 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=114303 bytes_read=353965 bytes_retransmit=0 bytes_invalid=0 send_seq=19026 receive_seq=19026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998608 adj=49997785 sd_pos=1130171 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.12 cputime=5764.977 memavail=3268244 print_time=18677.582 buffer_time=2.137 print_stall=0 extruder: target=210 temp=210.2 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64644.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52364374 bytes_read=8456145 bytes_retransmit=9 bytes_invalid=0 send_seq=1010360 receive_seq=1010360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1977 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=114309 bytes_read=353981 bytes_retransmit=0 bytes_invalid=0 send_seq=19027 receive_seq=19027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998605 adj=49997786 sd_pos=1131734 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.12 cputime=5765.061 memavail=3267992 print_time=18678.525 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.3 pwm=0.381
Stats 64645.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52369420 bytes_read=8456828 bytes_retransmit=9 bytes_invalid=0 send_seq=1010453 receive_seq=1010453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114315 bytes_read=354010 bytes_retransmit=0 bytes_invalid=0 send_seq=19028 receive_seq=19028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998603 adj=49997767 sd_pos=1133318 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.12 cputime=5765.114 memavail=3267752 print_time=18679.571 buffer_time=2.124 print_stall=0 extruder: target=210 temp=210.4 pwm=0.381
Stats 64646.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52372451 bytes_read=8457374 bytes_retransmit=9 bytes_invalid=0 send_seq=1010516 receive_seq=1010516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114321 bytes_read=354026 bytes_retransmit=0 bytes_invalid=0 send_seq=19029 receive_seq=19029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998604 adj=49997749 sd_pos=1134962 heater_bed: target=60 temp=60.0 pwm=0.277 sysload=0.12 cputime=5765.178 memavail=3267752 print_time=18680.636 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.5 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64647.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52377435 bytes_read=8458031 bytes_retransmit=9 bytes_invalid=0 send_seq=1010607 receive_seq=1010607 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114327 bytes_read=354042 bytes_retransmit=0 bytes_invalid=0 send_seq=19030 receive_seq=19030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998608 adj=49997724 sd_pos=1135854 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.12 cputime=5765.309 memavail=3267500 print_time=18681.647 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.5 pwm=0.329
Stats 64648.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52380991 bytes_read=8458603 bytes_retransmit=9 bytes_invalid=0 send_seq=1010678 receive_seq=1010678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=553 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114333 bytes_read=354058 bytes_retransmit=0 bytes_invalid=0 send_seq=19031 receive_seq=19031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998605 adj=49997756 sd_pos=1136446 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.11 cputime=5765.522 memavail=3266776 print_time=18682.614 buffer_time=2.165 print_stall=0 extruder: target=210 temp=210.4 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64649.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52385697 bytes_read=8459264 bytes_retransmit=9 bytes_invalid=0 send_seq=1010767 receive_seq=1010767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=704 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=114339 bytes_read=354074 bytes_retransmit=0 bytes_invalid=0 send_seq=19032 receive_seq=19032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998604 adj=49997732 sd_pos=1137128 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.11 cputime=5765.755 memavail=3266272 print_time=18683.828 buffer_time=2.379 print_stall=0 extruder: target=210 temp=210.3 pwm=0.384
Stats 64650.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52390216 bytes_read=8459862 bytes_retransmit=9 bytes_invalid=0 send_seq=1010843 receive_seq=1010843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1113 freq=400007565 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114345 bytes_read=354103 bytes_retransmit=0 bytes_invalid=0 send_seq=19033 receive_seq=19033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998602 adj=49997720 sd_pos=1138261 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.11 cputime=5765.988 memavail=3266272 print_time=18684.716 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.2 pwm=0.384
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64651.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52394154 bytes_read=8460459 bytes_retransmit=9 bytes_invalid=0 send_seq=1010920 receive_seq=1010920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=3048 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114351 bytes_read=354119 bytes_retransmit=0 bytes_invalid=0 send_seq=19034 receive_seq=19034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998600 adj=49997707 sd_pos=1140271 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.11 cputime=5766.196 memavail=3265768 print_time=18685.698 buffer_time=2.191 print_stall=0 extruder: target=210 temp=210.1 pwm=0.384
Stats 64652.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52399594 bytes_read=8461185 bytes_retransmit=9 bytes_invalid=0 send_seq=1011022 receive_seq=1011022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1003 freq=400007574 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114357 bytes_read=354135 bytes_retransmit=0 bytes_invalid=0 send_seq=19035 receive_seq=19035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998598 adj=49997637 sd_pos=1141805 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.11 cputime=5766.252 memavail=3265012 print_time=18686.758 buffer_time=2.250 print_stall=0 extruder: target=210 temp=209.9 pwm=0.384
Stats 64653.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52403024 bytes_read=8461732 bytes_retransmit=9 bytes_invalid=0 send_seq=1011091 receive_seq=1011091 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114363 bytes_read=354151 bytes_retransmit=0 bytes_invalid=0 send_seq=19036 receive_seq=19036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998602 adj=49997639 sd_pos=1143066 heater_bed: target=60 temp=60.0 pwm=0.285 sysload=0.18 cputime=5766.307 memavail=3265012 print_time=18687.555 buffer_time=2.047 print_stall=0 extruder: target=210 temp=209.9 pwm=0.414
Stats 64654.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=52405959 bytes_read=8462254 bytes_retransmit=9 bytes_invalid=0 send_seq=1011152 receive_seq=1011152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114369 bytes_read=354167 bytes_retransmit=0 bytes_invalid=0 send_seq=19037 receive_seq=19037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998604 adj=49997659 sd_pos=1144821 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.18 cputime=5766.382 memavail=3265012 print_time=18688.610 buffer_time=2.100 print_stall=0 extruder: target=210 temp=209.7 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64655.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52411885 bytes_read=8463046 bytes_retransmit=9 bytes_invalid=0 send_seq=1011264 receive_seq=1011264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114375 bytes_read=354183 bytes_retransmit=0 bytes_invalid=0 send_seq=19038 receive_seq=19038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998606 adj=49997687 sd_pos=1145538 heater_bed: target=60 temp=60.0 pwm=0.352 sysload=0.18 cputime=5766.557 memavail=3265012 print_time=18689.736 buffer_time=2.226 print_stall=0 extruder: target=210 temp=209.7 pwm=0.414
Stats 64656.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52414811 bytes_read=8463553 bytes_retransmit=9 bytes_invalid=0 send_seq=1011325 receive_seq=1011325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=995 freq=400007577 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114381 bytes_read=354212 bytes_retransmit=0 bytes_invalid=0 send_seq=19039 receive_seq=19039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998606 adj=49997726 sd_pos=1146029 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.18 cputime=5766.727 memavail=3264776 print_time=18690.733 buffer_time=2.222 print_stall=0 extruder: target=210 temp=209.6 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64657.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52420182 bytes_read=8464270 bytes_retransmit=9 bytes_invalid=0 send_seq=1011425 receive_seq=1011425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=204 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114387 bytes_read=354228 bytes_retransmit=0 bytes_invalid=0 send_seq=19040 receive_seq=19040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998606 adj=49997702 sd_pos=1147319 heater_bed: target=60 temp=60.0 pwm=0.328 sysload=0.18 cputime=5766.916 memavail=3264168 print_time=18691.657 buffer_time=2.145 print_stall=0 extruder: target=210 temp=209.7 pwm=0.424
Stats 64658.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52424034 bytes_read=8464861 bytes_retransmit=9 bytes_invalid=0 send_seq=1011500 receive_seq=1011500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1980 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114393 bytes_read=354244 bytes_retransmit=0 bytes_invalid=0 send_seq=19041 receive_seq=19041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998605 adj=49997653 sd_pos=1149951 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.25 cputime=5767.216 memavail=3264276 print_time=18692.730 buffer_time=2.200 print_stall=0 extruder: target=210 temp=209.7 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64659.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52428738 bytes_read=8465503 bytes_retransmit=9 bytes_invalid=0 send_seq=1011588 receive_seq=1011588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1698 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114399 bytes_read=354260 bytes_retransmit=0 bytes_invalid=0 send_seq=19042 receive_seq=19042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998603 adj=49997574 sd_pos=1151523 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.25 cputime=5767.325 memavail=3264276 print_time=18693.646 buffer_time=2.115 print_stall=0 extruder: target=210 temp=209.8 pwm=0.424
Stats 64660.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52433751 bytes_read=8466220 bytes_retransmit=9 bytes_invalid=0 send_seq=1011682 receive_seq=1011682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114405 bytes_read=354276 bytes_retransmit=0 bytes_invalid=0 send_seq=19043 receive_seq=19043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998607 adj=49997576 sd_pos=1153117 heater_bed: target=60 temp=60.0 pwm=0.249 sysload=0.25 cputime=5767.410 memavail=3264276 print_time=18694.700 buffer_time=2.169 print_stall=0 extruder: target=210 temp=210.1 pwm=0.359
Stats 64661.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52437055 bytes_read=8466761 bytes_retransmit=9 bytes_invalid=0 send_seq=1011750 receive_seq=1011750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=0 freq=400007845 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=114411 bytes_read=354305 bytes_retransmit=0 bytes_invalid=0 send_seq=19044 receive_seq=19044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998611 adj=49997654 sd_pos=1154860 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.25 cputime=5767.472 memavail=3264276 print_time=18695.774 buffer_time=2.242 print_stall=0 extruder: target=210 temp=210.1 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64662.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52442385 bytes_read=8467463 bytes_retransmit=9 bytes_invalid=0 send_seq=1011851 receive_seq=1011851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3400 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=114417 bytes_read=354321 bytes_retransmit=0 bytes_invalid=0 send_seq=19045 receive_seq=19045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998612 adj=49997385 sd_pos=1156774 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.25 cputime=5767.579 memavail=3264276 print_time=18697.225 buffer_time=2.692 print_stall=0 extruder: target=210 temp=210.2 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64663.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52445265 bytes_read=8467994 bytes_retransmit=9 bytes_invalid=0 send_seq=1011911 receive_seq=1011911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=7480 freq=400007789 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=114423 bytes_read=354337 bytes_retransmit=0 bytes_invalid=0 send_seq=19046 receive_seq=19046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998611 adj=49997522 sd_pos=1157813 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.23 cputime=5767.626 memavail=3264276 print_time=18698.089 buffer_time=2.555 print_stall=0 extruder: target=210 temp=210.3 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64664.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52449459 bytes_read=8468601 bytes_retransmit=9 bytes_invalid=0 send_seq=1011992 receive_seq=1011992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=6691 freq=400007776 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=114429 bytes_read=354353 bytes_retransmit=0 bytes_invalid=0 send_seq=19047 receive_seq=19047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998610 adj=49997558 sd_pos=1157959 heater_bed: target=60 temp=60.0 pwm=0.285 sysload=0.23 cputime=5767.703 memavail=3264276 print_time=18698.544 buffer_time=2.009 print_stall=0 extruder: target=210 temp=210.2 pwm=0.360
Stats 64665.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52458148 bytes_read=8469589 bytes_retransmit=9 bytes_invalid=0 send_seq=1012146 receive_seq=1012146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=3501 freq=400007794 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=114435 bytes_read=354369 bytes_retransmit=0 bytes_invalid=0 send_seq=19048 receive_seq=19048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998611 adj=49997570 sd_pos=1158532 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.23 cputime=5767.953 memavail=3264276 print_time=18699.783 buffer_time=2.247 print_stall=0 extruder: target=210 temp=210.2 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64666.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52465821 bytes_read=8470510 bytes_retransmit=9 bytes_invalid=0 send_seq=1012284 receive_seq=1012284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1580 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114441 bytes_read=354398 bytes_retransmit=0 bytes_invalid=0 send_seq=19049 receive_seq=19049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998609 adj=49997558 sd_pos=1159508 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.23 cputime=5768.146 memavail=3264036 print_time=18700.950 buffer_time=2.414 print_stall=0 extruder: target=210 temp=210.3 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64667.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52470308 bytes_read=8471117 bytes_retransmit=9 bytes_invalid=0 send_seq=1012365 receive_seq=1012365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=518 freq=400007730 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114447 bytes_read=354414 bytes_retransmit=0 bytes_invalid=0 send_seq=19050 receive_seq=19050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998608 adj=49997615 sd_pos=1160264 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.23 cputime=5768.311 memavail=3262776 print_time=18701.559 buffer_time=2.021 print_stall=0 extruder: target=210 temp=210.3 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64668.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52474423 bytes_read=8471699 bytes_retransmit=9 bytes_invalid=0 send_seq=1012441 receive_seq=1012441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2286 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114453 bytes_read=354430 bytes_retransmit=0 bytes_invalid=0 send_seq=19051 receive_seq=19051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998606 adj=49997638 sd_pos=1161873 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.29 cputime=5768.566 memavail=3262784 print_time=18702.539 buffer_time=2.001 print_stall=0 extruder: target=210 temp=210.4 pwm=0.346
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64669.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52480123 bytes_read=8472455 bytes_retransmit=9 bytes_invalid=0 send_seq=1012546 receive_seq=1012546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2180 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114459 bytes_read=354446 bytes_retransmit=0 bytes_invalid=0 send_seq=19052 receive_seq=19052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998604 adj=49997625 sd_pos=1164194 heater_bed: target=60 temp=60.0 pwm=0.335 sysload=0.29 cputime=5768.647 memavail=3262784 print_time=18703.573 buffer_time=2.034 print_stall=0 extruder: target=210 temp=210.5 pwm=0.346
Stats 64670.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52485344 bytes_read=8473153 bytes_retransmit=9 bytes_invalid=0 send_seq=1012642 receive_seq=1012642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114465 bytes_read=354462 bytes_retransmit=0 bytes_invalid=0 send_seq=19053 receive_seq=19053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998603 adj=49997637 sd_pos=1165851 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.29 cputime=5768.700 memavail=3263524 print_time=18704.610 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.5 pwm=0.346
Stats 64671.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52488407 bytes_read=8473670 bytes_retransmit=9 bytes_invalid=0 send_seq=1012705 receive_seq=1012705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114471 bytes_read=354491 bytes_retransmit=0 bytes_invalid=0 send_seq=19054 receive_seq=19054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998602 adj=49997676 sd_pos=1167577 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.29 cputime=5768.737 memavail=3266968 print_time=18705.660 buffer_time=2.120 print_stall=0 extruder: target=210 temp=210.4 pwm=0.346
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64672.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52494043 bytes_read=8474362 bytes_retransmit=9 bytes_invalid=0 send_seq=1012810 receive_seq=1012798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=317 upcoming_bytes=2565 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114477 bytes_read=354507 bytes_retransmit=0 bytes_invalid=0 send_seq=19055 receive_seq=19055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998602 adj=49997689 sd_pos=1169629 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.29 cputime=5768.791 memavail=3266476 print_time=18707.010 buffer_time=2.466 print_stall=0 extruder: target=210 temp=210.2 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64673.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52497282 bytes_read=8474902 bytes_retransmit=9 bytes_invalid=0 send_seq=1012866 receive_seq=1012866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=6984 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114483 bytes_read=354523 bytes_retransmit=0 bytes_invalid=0 send_seq=19056 receive_seq=19056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998610 adj=49997666 sd_pos=1170915 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.26 cputime=5768.883 memavail=3266476 print_time=18707.910 buffer_time=2.366 print_stall=0 extruder: target=210 temp=210.1 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64674.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52502689 bytes_read=8475569 bytes_retransmit=9 bytes_invalid=0 send_seq=1012959 receive_seq=1012959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5793 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114489 bytes_read=354539 bytes_retransmit=0 bytes_invalid=0 send_seq=19057 receive_seq=19057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998616 adj=49997782 sd_pos=1171414 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.26 cputime=5769.083 memavail=3265468 print_time=18708.588 buffer_time=2.043 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
Stats 64675.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52511377 bytes_read=8476546 bytes_retransmit=9 bytes_invalid=0 send_seq=1013105 receive_seq=1013105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2638 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114495 bytes_read=354555 bytes_retransmit=0 bytes_invalid=0 send_seq=19058 receive_seq=19058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998614 adj=49997849 sd_pos=1172018 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.26 cputime=5769.292 memavail=3265468 print_time=18709.800 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.9 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64676.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52518020 bytes_read=8477343 bytes_retransmit=9 bytes_invalid=0 send_seq=1013224 receive_seq=1013224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1439 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=114501 bytes_read=354584 bytes_retransmit=0 bytes_invalid=0 send_seq=19059 receive_seq=19059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998613 adj=49997808 sd_pos=1172695 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.26 cputime=5769.467 memavail=3265468 print_time=18710.828 buffer_time=2.281 print_stall=0 extruder: target=210 temp=209.8 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64677.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52522297 bytes_read=8477920 bytes_retransmit=9 bytes_invalid=0 send_seq=1013299 receive_seq=1013299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2469 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=114507 bytes_read=354600 bytes_retransmit=0 bytes_invalid=0 send_seq=19060 receive_seq=19060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998613 adj=49997774 sd_pos=1175032 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.26 cputime=5769.690 memavail=3264460 print_time=18711.727 buffer_time=2.180 print_stall=0 extruder: target=210 temp=209.9 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64678.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52526779 bytes_read=8478576 bytes_retransmit=9 bytes_invalid=0 send_seq=1013384 receive_seq=1013384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=4106 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=114513 bytes_read=354616 bytes_retransmit=0 bytes_invalid=0 send_seq=19061 receive_seq=19061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998612 adj=49997787 sd_pos=1177687 heater_bed: target=60 temp=60.0 pwm=0.314 sysload=0.24 cputime=5769.897 memavail=3264216 print_time=18712.718 buffer_time=2.171 print_stall=0 extruder: target=210 temp=210.0 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64679.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=52533151 bytes_read=8479303 bytes_retransmit=9 bytes_invalid=0 send_seq=1013489 receive_seq=1013489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2495 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=114519 bytes_read=354632 bytes_retransmit=0 bytes_invalid=0 send_seq=19062 receive_seq=19062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998614 adj=49997763 sd_pos=1179083 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.24 cputime=5769.962 memavail=3264216 print_time=18713.693 buffer_time=2.145 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
Stats 64680.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52538850 bytes_read=8480061 bytes_retransmit=9 bytes_invalid=0 send_seq=1013594 receive_seq=1013594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=11 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=114525 bytes_read=354648 bytes_retransmit=0 bytes_invalid=0 send_seq=19063 receive_seq=19063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998620 adj=49997774 sd_pos=1180864 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.24 cputime=5770.073 memavail=3269452 print_time=18714.742 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.3 pwm=0.328
Stats 64681.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52541708 bytes_read=8480572 bytes_retransmit=9 bytes_invalid=0 send_seq=1013653 receive_seq=1013653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007574 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114531 bytes_read=354677 bytes_retransmit=0 bytes_invalid=0 send_seq=19064 receive_seq=19064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998626 adj=49997824 sd_pos=1182424 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.24 cputime=5770.139 memavail=3269588 print_time=18715.779 buffer_time=2.230 print_stall=0 extruder: target=210 temp=210.3 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64682.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52547570 bytes_read=8481319 bytes_retransmit=9 bytes_invalid=0 send_seq=1013762 receive_seq=1013762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2215 freq=400007562 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114537 bytes_read=354693 bytes_retransmit=0 bytes_invalid=0 send_seq=19065 receive_seq=19065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998627 adj=49997889 sd_pos=1184309 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.24 cputime=5770.219 memavail=3269588 print_time=18716.941 buffer_time=2.390 print_stall=0 extruder: target=210 temp=210.3 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64683.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52550418 bytes_read=8481785 bytes_retransmit=9 bytes_invalid=0 send_seq=1013813 receive_seq=1013813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=7029 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114543 bytes_read=354709 bytes_retransmit=0 bytes_invalid=0 send_seq=19066 receive_seq=19066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998629 adj=49997868 sd_pos=1185600 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.22 cputime=5770.319 memavail=3269356 print_time=18717.882 buffer_time=2.331 print_stall=0 extruder: target=210 temp=210.3 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64684.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52556579 bytes_read=8482560 bytes_retransmit=9 bytes_invalid=0 send_seq=1013925 receive_seq=1013925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=5716 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114549 bytes_read=354725 bytes_retransmit=0 bytes_invalid=0 send_seq=19067 receive_seq=19067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998631 adj=49997878 sd_pos=1185968 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.22 cputime=5770.524 memavail=3269356 print_time=18718.725 buffer_time=2.173 print_stall=0 extruder: target=210 temp=210.1 pwm=0.361
Stats 64685.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52564720 bytes_read=8483503 bytes_retransmit=9 bytes_invalid=0 send_seq=1014070 receive_seq=1014070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=2139 freq=400007534 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114555 bytes_read=354741 bytes_retransmit=0 bytes_invalid=0 send_seq=19068 receive_seq=19068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998628 adj=49997882 sd_pos=1186475 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.22 cputime=5770.708 memavail=3269356 print_time=18719.620 buffer_time=2.067 print_stall=0 extruder: target=210 temp=209.9 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64686.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52571452 bytes_read=8484330 bytes_retransmit=9 bytes_invalid=0 send_seq=1014192 receive_seq=1014192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1820 freq=400007521 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114561 bytes_read=354770 bytes_retransmit=0 bytes_invalid=0 send_seq=19069 receive_seq=19069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998627 adj=49997856 sd_pos=1187525 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.22 cputime=5770.902 memavail=3269356 print_time=18720.857 buffer_time=2.304 print_stall=0 extruder: target=210 temp=209.9 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64687.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52576012 bytes_read=8484976 bytes_retransmit=9 bytes_invalid=0 send_seq=1014279 receive_seq=1014278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3416 freq=400007507 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114567 bytes_read=354786 bytes_retransmit=0 bytes_invalid=0 send_seq=19070 receive_seq=19070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998626 adj=49997808 sd_pos=1190355 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.22 cputime=5771.155 memavail=3267848 print_time=18721.860 buffer_time=2.306 print_stall=0 extruder: target=210 temp=209.8 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64688.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52580578 bytes_read=8485629 bytes_retransmit=9 bytes_invalid=0 send_seq=1014366 receive_seq=1014366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=5316 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114579 bytes_read=354818 bytes_retransmit=0 bytes_invalid=0 send_seq=19072 receive_seq=19072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998630 adj=49997793 sd_pos=1193907 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.21 cputime=5771.363 memavail=3267848 print_time=18722.897 buffer_time=2.342 print_stall=0 extruder: target=210 temp=209.8 pwm=0.414
Stats 64689.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52586906 bytes_read=8486406 bytes_retransmit=9 bytes_invalid=0 send_seq=1014478 receive_seq=1014478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2399 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114585 bytes_read=354834 bytes_retransmit=0 bytes_invalid=0 send_seq=19073 receive_seq=19073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998632 adj=49997779 sd_pos=1195224 heater_bed: target=60 temp=60.0 pwm=0.295 sysload=0.21 cputime=5771.445 memavail=3267848 print_time=18723.748 buffer_time=2.192 print_stall=0 extruder: target=210 temp=209.9 pwm=0.361
Stats 64690.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52592460 bytes_read=8487153 bytes_retransmit=9 bytes_invalid=0 send_seq=1014581 receive_seq=1014581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114591 bytes_read=354850 bytes_retransmit=0 bytes_invalid=0 send_seq=19074 receive_seq=19074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998635 adj=49997765 sd_pos=1196847 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.21 cputime=5771.550 memavail=3267124 print_time=18724.770 buffer_time=2.211 print_stall=0 extruder: target=210 temp=210.0 pwm=0.361
Stats 64691.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52595240 bytes_read=8487650 bytes_retransmit=9 bytes_invalid=0 send_seq=1014640 receive_seq=1014640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114597 bytes_read=354879 bytes_retransmit=0 bytes_invalid=0 send_seq=19075 receive_seq=19075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998637 adj=49997465 sd_pos=1198458 heater_bed: target=60 temp=60.1 pwm=0.052 sysload=0.21 cputime=5771.623 memavail=3267124 print_time=18725.792 buffer_time=2.233 print_stall=0 extruder: target=210 temp=210.0 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64692.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52601029 bytes_read=8488407 bytes_retransmit=9 bytes_invalid=0 send_seq=1014748 receive_seq=1014748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3496 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114603 bytes_read=354894 bytes_retransmit=0 bytes_invalid=0 send_seq=19076 receive_seq=19076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998640 adj=49997535 sd_pos=1200401 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.21 cputime=5771.730 memavail=3267124 print_time=18727.029 buffer_time=2.469 print_stall=0 extruder: target=210 temp=210.1 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64693.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52603985 bytes_read=8488928 bytes_retransmit=9 bytes_invalid=0 send_seq=1014809 receive_seq=1014809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=6460 freq=400007754 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114609 bytes_read=354909 bytes_retransmit=0 bytes_invalid=0 send_seq=19077 receive_seq=19077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998641 adj=49997590 sd_pos=1201719 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.19 cputime=5771.816 memavail=3267128 print_time=18727.711 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.1 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64694.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52610574 bytes_read=8489680 bytes_retransmit=9 bytes_invalid=0 send_seq=1014920 receive_seq=1014920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=6524 freq=400007743 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114615 bytes_read=354924 bytes_retransmit=0 bytes_invalid=0 send_seq=19078 receive_seq=19078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998640 adj=49997636 sd_pos=1202592 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.19 cputime=5772.069 memavail=3267128 print_time=18728.852 buffer_time=2.290 print_stall=0 extruder: target=210 temp=210.1 pwm=0.345
Stats 64695.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52619160 bytes_read=8490678 bytes_retransmit=9 bytes_invalid=0 send_seq=1015073 receive_seq=1015073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2124 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=114621 bytes_read=354939 bytes_retransmit=0 bytes_invalid=0 send_seq=19079 receive_seq=19079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998642 adj=49997642 sd_pos=1203003 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.19 cputime=5772.253 memavail=3267128 print_time=18729.717 buffer_time=2.155 print_stall=0 extruder: target=210 temp=210.1 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64696.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52625511 bytes_read=8491469 bytes_retransmit=9 bytes_invalid=0 send_seq=1015188 receive_seq=1015188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2112 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114627 bytes_read=354967 bytes_retransmit=0 bytes_invalid=0 send_seq=19080 receive_seq=19080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998643 adj=49997710 sd_pos=1204768 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.19 cputime=5772.401 memavail=3267128 print_time=18730.783 buffer_time=2.220 print_stall=0 extruder: target=210 temp=210.0 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64697.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52630039 bytes_read=8492106 bytes_retransmit=9 bytes_invalid=0 send_seq=1015275 receive_seq=1015275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=3170 freq=400007743 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114633 bytes_read=354983 bytes_retransmit=0 bytes_invalid=0 send_seq=19081 receive_seq=19081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998645 adj=49997680 sd_pos=1209131 heater_bed: target=60 temp=60.0 pwm=0.341 sysload=0.19 cputime=5772.648 memavail=3267132 print_time=18731.694 buffer_time=2.131 print_stall=0 extruder: target=210 temp=210.0 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64698.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52635361 bytes_read=8492778 bytes_retransmit=9 bytes_invalid=0 send_seq=1015366 receive_seq=1015366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=4483 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114639 bytes_read=354999 bytes_retransmit=0 bytes_invalid=0 send_seq=19082 receive_seq=19082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998643 adj=49997705 sd_pos=1211689 heater_bed: target=60 temp=60.1 pwm=0.007 sysload=0.17 cputime=5772.867 memavail=3267132 print_time=18732.735 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.0 pwm=0.380
Stats 64699.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52641896 bytes_read=8493589 bytes_retransmit=9 bytes_invalid=0 send_seq=1015485 receive_seq=1015485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2107 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114645 bytes_read=355015 bytes_retransmit=0 bytes_invalid=0 send_seq=19083 receive_seq=19083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998645 adj=49997715 sd_pos=1213416 heater_bed: target=60 temp=60.0 pwm=0.298 sysload=0.17 cputime=5772.949 memavail=3267132 print_time=18733.800 buffer_time=2.235 print_stall=0 extruder: target=210 temp=209.9 pwm=0.380
Stats 64700.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=52646380 bytes_read=8494216 bytes_retransmit=9 bytes_invalid=0 send_seq=1015570 receive_seq=1015570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=114651 bytes_read=355031 bytes_retransmit=0 bytes_invalid=0 send_seq=19084 receive_seq=19084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998648 adj=49997750 sd_pos=1214689 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.17 cputime=5773.038 memavail=3266892 print_time=18734.575 buffer_time=2.009 print_stall=0 extruder: target=210 temp=209.9 pwm=0.380
Stats 64701.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52649411 bytes_read=8494769 bytes_retransmit=9 bytes_invalid=0 send_seq=1015634 receive_seq=1015634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007788 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114657 bytes_read=355060 bytes_retransmit=0 bytes_invalid=0 send_seq=19085 receive_seq=19085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998647 adj=49997694 sd_pos=1216443 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.17 cputime=5773.103 memavail=3266896 print_time=18735.609 buffer_time=2.042 print_stall=0 extruder: target=210 temp=209.8 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64702.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52655503 bytes_read=8495540 bytes_retransmit=9 bytes_invalid=0 send_seq=1015745 receive_seq=1015745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2342 freq=400007771 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114663 bytes_read=355076 bytes_retransmit=0 bytes_invalid=0 send_seq=19086 receive_seq=19086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998651 adj=49997634 sd_pos=1218420 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.17 cputime=5773.198 memavail=3266896 print_time=18736.805 buffer_time=2.238 print_stall=0 extruder: target=210 temp=209.7 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64703.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52658511 bytes_read=8496052 bytes_retransmit=9 bytes_invalid=0 send_seq=1015807 receive_seq=1015807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=7260 freq=400007782 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114669 bytes_read=355092 bytes_retransmit=0 bytes_invalid=0 send_seq=19087 receive_seq=19087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997717 sd_pos=1219977 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.16 cputime=5773.305 memavail=3266140 print_time=18737.803 buffer_time=2.235 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64704.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52665399 bytes_read=8496863 bytes_retransmit=9 bytes_invalid=0 send_seq=1015926 receive_seq=1015926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=5337 freq=400007755 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114675 bytes_read=355108 bytes_retransmit=0 bytes_invalid=0 send_seq=19088 receive_seq=19088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998648 adj=49997669 sd_pos=1220569 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.16 cputime=5773.444 memavail=3266140 print_time=18738.683 buffer_time=2.113 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
Stats 64705.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52673871 bytes_read=8497826 bytes_retransmit=9 bytes_invalid=0 send_seq=1016076 receive_seq=1016076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2322 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=114681 bytes_read=355124 bytes_retransmit=0 bytes_invalid=0 send_seq=19089 receive_seq=19089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997697 sd_pos=1221110 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.16 cputime=5773.645 memavail=3265640 print_time=18739.696 buffer_time=2.126 print_stall=0 extruder: target=210 temp=209.5 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64706.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52680057 bytes_read=8498609 bytes_retransmit=9 bytes_invalid=0 send_seq=1016189 receive_seq=1016189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3059 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114687 bytes_read=355153 bytes_retransmit=0 bytes_invalid=0 send_seq=19090 receive_seq=19090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998647 adj=49997727 sd_pos=1222200 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.16 cputime=5773.833 memavail=3265640 print_time=18740.893 buffer_time=2.323 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64707.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52685224 bytes_read=8499306 bytes_retransmit=9 bytes_invalid=0 send_seq=1016285 receive_seq=1016285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3907 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114693 bytes_read=355169 bytes_retransmit=0 bytes_invalid=0 send_seq=19091 receive_seq=19091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998646 adj=49997733 sd_pos=1224104 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.16 cputime=5774.006 memavail=3265524 print_time=18741.743 buffer_time=2.171 print_stall=0 extruder: target=210 temp=209.9 pwm=0.354
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64708.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52690551 bytes_read=8500022 bytes_retransmit=9 bytes_invalid=0 send_seq=1016385 receive_seq=1016385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=7394 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114699 bytes_read=355185 bytes_retransmit=0 bytes_invalid=0 send_seq=19092 receive_seq=19092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998645 adj=49997730 sd_pos=1227589 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.15 cputime=5774.285 memavail=3269376 print_time=18742.936 buffer_time=2.333 print_stall=0 extruder: target=210 temp=210.1 pwm=0.354
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64709.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52697646 bytes_read=8500814 bytes_retransmit=9 bytes_invalid=0 send_seq=1016503 receive_seq=1016503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=7626 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114705 bytes_read=355201 bytes_retransmit=0 bytes_invalid=0 send_seq=19093 receive_seq=19093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998645 adj=49997724 sd_pos=1230123 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.15 cputime=5774.386 memavail=3269124 print_time=18743.878 buffer_time=2.275 print_stall=0 extruder: target=210 temp=210.3 pwm=0.354
Stats 64710.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52705577 bytes_read=8501737 bytes_retransmit=9 bytes_invalid=0 send_seq=1016641 receive_seq=1016641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2481 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114711 bytes_read=355217 bytes_retransmit=0 bytes_invalid=0 send_seq=19094 receive_seq=19094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998644 adj=49997738 sd_pos=1231368 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.15 cputime=5774.440 memavail=3269124 print_time=18744.654 buffer_time=2.050 print_stall=0 extruder: target=210 temp=210.5 pwm=0.293
Stats 64711.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52711142 bytes_read=8502453 bytes_retransmit=9 bytes_invalid=0 send_seq=1016741 receive_seq=1016741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114717 bytes_read=355246 bytes_retransmit=0 bytes_invalid=0 send_seq=19095 receive_seq=19095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998643 adj=49997750 sd_pos=1233053 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.15 cputime=5774.490 memavail=3269128 print_time=18745.698 buffer_time=2.093 print_stall=0 extruder: target=210 temp=210.6 pwm=0.293
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64712.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52714442 bytes_read=8502985 bytes_retransmit=9 bytes_invalid=0 send_seq=1016807 receive_seq=1016807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=0 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114723 bytes_read=355262 bytes_retransmit=0 bytes_invalid=0 send_seq=19096 receive_seq=19096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998641 adj=49997746 sd_pos=1234713 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.15 cputime=5774.527 memavail=3269128 print_time=18746.783 buffer_time=2.177 print_stall=0 extruder: target=210 temp=210.5 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64713.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52720052 bytes_read=8503732 bytes_retransmit=9 bytes_invalid=0 send_seq=1016913 receive_seq=1016913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1925 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114729 bytes_read=355278 bytes_retransmit=0 bytes_invalid=0 send_seq=19097 receive_seq=19097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998640 adj=49997714 sd_pos=1236385 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.13 cputime=5774.583 memavail=3268376 print_time=18747.645 buffer_time=2.038 print_stall=0 extruder: target=210 temp=210.4 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64714.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52722975 bytes_read=8504238 bytes_retransmit=9 bytes_invalid=0 send_seq=1016971 receive_seq=1016971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=7405 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114735 bytes_read=355294 bytes_retransmit=0 bytes_invalid=0 send_seq=19098 receive_seq=19098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998640 adj=49997715 sd_pos=1238129 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.13 cputime=5774.703 memavail=3268376 print_time=18748.717 buffer_time=2.109 print_stall=0 extruder: target=210 temp=210.3 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64715.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52731529 bytes_read=8505213 bytes_retransmit=9 bytes_invalid=0 send_seq=1017123 receive_seq=1017123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=6205 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=114741 bytes_read=355310 bytes_retransmit=0 bytes_invalid=0 send_seq=19099 receive_seq=19099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998638 adj=49997714 sd_pos=1239040 heater_bed: target=60 temp=60.0 pwm=0.413 sysload=0.13 cputime=5774.935 memavail=3268376 print_time=18749.907 buffer_time=2.273 print_stall=0 extruder: target=210 temp=210.1 pwm=0.404
Stats 64716.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52739777 bytes_read=8506142 bytes_retransmit=9 bytes_invalid=0 send_seq=1017263 receive_seq=1017263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=2535 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114747 bytes_read=355339 bytes_retransmit=0 bytes_invalid=0 send_seq=19100 receive_seq=19100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998638 adj=49997692 sd_pos=1239706 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.13 cputime=5775.088 memavail=3268136 print_time=18750.738 buffer_time=2.103 print_stall=0 extruder: target=210 temp=210.0 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64717.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52746483 bytes_read=8506944 bytes_retransmit=9 bytes_invalid=0 send_seq=1017383 receive_seq=1017383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1112 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114753 bytes_read=355355 bytes_retransmit=0 bytes_invalid=0 send_seq=19101 receive_seq=19101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998638 adj=49997712 sd_pos=1240500 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.13 cputime=5775.286 memavail=3266656 print_time=18751.703 buffer_time=2.067 print_stall=0 extruder: target=210 temp=209.8 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64718.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52751056 bytes_read=8507556 bytes_retransmit=9 bytes_invalid=0 send_seq=1017465 receive_seq=1017465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=7053 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114759 bytes_read=355371 bytes_retransmit=0 bytes_invalid=0 send_seq=19102 receive_seq=19102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998637 adj=49997722 sd_pos=1243653 heater_bed: target=60 temp=60.0 pwm=0.393 sysload=0.12 cputime=5775.540 memavail=3266656 print_time=18753.053 buffer_time=2.416 print_stall=0 extruder: target=210 temp=209.8 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64719.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52756702 bytes_read=8508312 bytes_retransmit=9 bytes_invalid=0 send_seq=1017570 receive_seq=1017570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=8213 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114765 bytes_read=355387 bytes_retransmit=0 bytes_invalid=0 send_seq=19103 receive_seq=19103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998637 adj=49997710 sd_pos=1245874 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.12 cputime=5775.718 memavail=3266656 print_time=18753.984 buffer_time=2.346 print_stall=0 extruder: target=210 temp=209.9 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64720.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52764246 bytes_read=8509205 bytes_retransmit=9 bytes_invalid=0 send_seq=1017705 receive_seq=1017705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=7548 freq=400007583 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114771 bytes_read=355403 bytes_retransmit=0 bytes_invalid=0 send_seq=19104 receive_seq=19104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998643 adj=49997732 sd_pos=1247530 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.12 cputime=5775.836 memavail=3266656 print_time=18754.761 buffer_time=2.122 print_stall=0 extruder: target=210 temp=209.9 pwm=0.372
Stats 64721.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52772640 bytes_read=8510157 bytes_retransmit=9 bytes_invalid=0 send_seq=1017855 receive_seq=1017855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2499 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114777 bytes_read=355432 bytes_retransmit=0 bytes_invalid=0 send_seq=19105 receive_seq=19105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998647 adj=49997792 sd_pos=1249142 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.12 cputime=5775.942 memavail=3266656 print_time=18755.784 buffer_time=2.144 print_stall=0 extruder: target=210 temp=210.0 pwm=0.372
Stats 64722.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52778316 bytes_read=8510913 bytes_retransmit=9 bytes_invalid=0 send_seq=1017960 receive_seq=1017960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114783 bytes_read=355448 bytes_retransmit=0 bytes_invalid=0 send_seq=19106 receive_seq=19106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997835 sd_pos=1250829 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.12 cputime=5776.026 memavail=3266656 print_time=18756.811 buffer_time=2.171 print_stall=0 extruder: target=210 temp=209.9 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64723.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52780842 bytes_read=8511385 bytes_retransmit=9 bytes_invalid=0 send_seq=1018014 receive_seq=1018014 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114789 bytes_read=355464 bytes_retransmit=0 bytes_invalid=0 send_seq=19107 receive_seq=19107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998654 adj=49997772 sd_pos=1253366 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.11 cputime=5776.094 memavail=3266656 print_time=18757.633 buffer_time=1.987 print_stall=0 extruder: target=210 temp=210.1 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64724.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52787051 bytes_read=8512157 bytes_retransmit=9 bytes_invalid=0 send_seq=1018128 receive_seq=1018128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=5659 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114795 bytes_read=355480 bytes_retransmit=0 bytes_invalid=0 send_seq=19108 receive_seq=19108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998652 adj=49997759 sd_pos=1254806 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.11 cputime=5776.198 memavail=3266928 print_time=18759.128 buffer_time=2.482 print_stall=0 extruder: target=210 temp=210.0 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64725.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52790702 bytes_read=8512769 bytes_retransmit=9 bytes_invalid=0 send_seq=1018201 receive_seq=1018201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=6926 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114801 bytes_read=355496 bytes_retransmit=0 bytes_invalid=0 send_seq=19109 receive_seq=19109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998651 adj=49997678 sd_pos=1255796 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.11 cputime=5776.240 memavail=3266688 print_time=18759.686 buffer_time=2.040 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64726.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52799123 bytes_read=8513716 bytes_retransmit=9 bytes_invalid=0 send_seq=1018351 receive_seq=1018351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=5079 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114807 bytes_read=355525 bytes_retransmit=0 bytes_invalid=0 send_seq=19110 receive_seq=19110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998650 adj=49997700 sd_pos=1256442 heater_bed: target=60 temp=60.0 pwm=0.275 sysload=0.11 cputime=5776.415 memavail=3266184 print_time=18760.770 buffer_time=2.122 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
Stats 64727.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52807339 bytes_read=8514668 bytes_retransmit=9 bytes_invalid=0 send_seq=1018498 receive_seq=1018498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2912 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114813 bytes_read=355541 bytes_retransmit=0 bytes_invalid=0 send_seq=19111 receive_seq=19111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997717 sd_pos=1257267 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.11 cputime=5776.621 memavail=3265932 print_time=18761.896 buffer_time=2.247 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64728.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52813400 bytes_read=8515444 bytes_retransmit=9 bytes_invalid=0 send_seq=1018610 receive_seq=1018610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2418 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114819 bytes_read=355557 bytes_retransmit=0 bytes_invalid=0 send_seq=19112 receive_seq=19112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998650 adj=49997671 sd_pos=1258414 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.10 cputime=5776.763 memavail=3265944 print_time=18762.837 buffer_time=2.188 print_stall=0 extruder: target=210 temp=210.3 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64729.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52819015 bytes_read=8516171 bytes_retransmit=9 bytes_invalid=0 send_seq=1018715 receive_seq=1018715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3451 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114825 bytes_read=355573 bytes_retransmit=0 bytes_invalid=0 send_seq=19113 receive_seq=19113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998650 adj=49997711 sd_pos=1259914 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.10 cputime=5776.997 memavail=3265944 print_time=18763.706 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.4 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64730.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52824089 bytes_read=8516874 bytes_retransmit=9 bytes_invalid=0 send_seq=1018809 receive_seq=1018809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=7684 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=114831 bytes_read=355589 bytes_retransmit=0 bytes_invalid=0 send_seq=19114 receive_seq=19114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997735 sd_pos=1262942 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.10 cputime=5777.170 memavail=3265944 print_time=18764.819 buffer_time=2.169 print_stall=0 extruder: target=210 temp=210.5 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64731.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52831965 bytes_read=8517795 bytes_retransmit=9 bytes_invalid=0 send_seq=1018950 receive_seq=1018950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7747 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=114837 bytes_read=355618 bytes_retransmit=0 bytes_invalid=0 send_seq=19115 receive_seq=19115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997721 sd_pos=1265283 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.10 cputime=5777.324 memavail=3265944 print_time=18765.974 buffer_time=2.322 print_stall=0 extruder: target=210 temp=210.5 pwm=0.328
Stats 64732.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52840795 bytes_read=8518782 bytes_retransmit=9 bytes_invalid=0 send_seq=1019107 receive_seq=1019107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1750 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=114843 bytes_read=355634 bytes_retransmit=0 bytes_invalid=0 send_seq=19116 receive_seq=19116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997734 sd_pos=1266547 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.10 cputime=5777.380 memavail=3265944 print_time=18766.743 buffer_time=2.091 print_stall=0 extruder: target=210 temp=210.5 pwm=0.313
Stats 64733.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52845482 bytes_read=8519434 bytes_retransmit=9 bytes_invalid=0 send_seq=1019194 receive_seq=1019194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=114849 bytes_read=355650 bytes_retransmit=0 bytes_invalid=0 send_seq=19117 receive_seq=19117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997751 sd_pos=1268161 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.18 cputime=5777.424 memavail=3270296 print_time=18767.765 buffer_time=2.113 print_stall=0 extruder: target=210 temp=210.4 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64734.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52851579 bytes_read=8520165 bytes_retransmit=9 bytes_invalid=0 send_seq=1019297 receive_seq=1019297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=555 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=114855 bytes_read=355666 bytes_retransmit=0 bytes_invalid=0 send_seq=19118 receive_seq=19118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998649 adj=49997755 sd_pos=1270577 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.18 cputime=5777.513 memavail=3270584 print_time=18769.184 buffer_time=2.531 print_stall=0 extruder: target=210 temp=210.1 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64735.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52854442 bytes_read=8520683 bytes_retransmit=9 bytes_invalid=0 send_seq=1019357 receive_seq=1019357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1804 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=114861 bytes_read=355682 bytes_retransmit=0 bytes_invalid=0 send_seq=19119 receive_seq=19119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998650 adj=49997753 sd_pos=1271487 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.18 cputime=5777.579 memavail=3268820 print_time=18769.660 buffer_time=2.007 print_stall=0 extruder: target=210 temp=209.9 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64736.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52857471 bytes_read=8521204 bytes_retransmit=9 bytes_invalid=0 send_seq=1019419 receive_seq=1019418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=9787 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114867 bytes_read=355711 bytes_retransmit=0 bytes_invalid=0 send_seq=19120 receive_seq=19120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998652 adj=49997768 sd_pos=1273829 heater_bed: target=60 temp=60.0 pwm=0.054 sysload=0.18 cputime=5777.735 memavail=3268568 print_time=18771.140 buffer_time=2.486 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
Stats 64737.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52865993 bytes_read=8522181 bytes_retransmit=9 bytes_invalid=0 send_seq=1019571 receive_seq=1019571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=5273 freq=400007565 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114873 bytes_read=355727 bytes_retransmit=0 bytes_invalid=0 send_seq=19121 receive_seq=19121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998655 adj=49997770 sd_pos=1274186 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.18 cputime=5777.921 memavail=3267564 print_time=18771.765 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.5 pwm=0.423
Stats 64738.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52874569 bytes_read=8523148 bytes_retransmit=9 bytes_invalid=0 send_seq=1019724 receive_seq=1019724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2390 freq=400007569 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114879 bytes_read=355743 bytes_retransmit=0 bytes_invalid=0 send_seq=19122 receive_seq=19122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998657 adj=49997820 sd_pos=1275077 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.24 cputime=5778.119 memavail=3267580 print_time=18772.820 buffer_time=2.165 print_stall=0 extruder: target=210 temp=209.4 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64739.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52880578 bytes_read=8523920 bytes_retransmit=9 bytes_invalid=0 send_seq=1019835 receive_seq=1019835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1962 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114885 bytes_read=355759 bytes_retransmit=0 bytes_invalid=0 send_seq=19123 receive_seq=19123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998657 adj=49997820 sd_pos=1275558 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.24 cputime=5778.323 memavail=3266572 print_time=18773.883 buffer_time=2.227 print_stall=0 extruder: target=210 temp=209.4 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64740.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52885498 bytes_read=8524612 bytes_retransmit=9 bytes_invalid=0 send_seq=1019927 receive_seq=1019927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=8153 freq=400007550 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114891 bytes_read=355775 bytes_retransmit=0 bytes_invalid=0 send_seq=19124 receive_seq=19124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998657 adj=49997800 sd_pos=1278697 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.24 cputime=5778.494 memavail=3266572 print_time=18775.202 buffer_time=2.545 print_stall=0 extruder: target=210 temp=209.7 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64741.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52890813 bytes_read=8525269 bytes_retransmit=9 bytes_invalid=0 send_seq=1020018 receive_seq=1020018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=8152 freq=400007547 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114897 bytes_read=355804 bytes_retransmit=0 bytes_invalid=0 send_seq=19125 receive_seq=19125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998656 adj=49997794 sd_pos=1279662 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.24 cputime=5778.663 memavail=3266576 print_time=18775.950 buffer_time=2.293 print_stall=0 extruder: target=210 temp=209.8 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64742.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52898690 bytes_read=8526196 bytes_retransmit=9 bytes_invalid=0 send_seq=1020160 receive_seq=1020160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=9018 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114903 bytes_read=355820 bytes_retransmit=0 bytes_invalid=0 send_seq=19126 receive_seq=19126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998656 adj=49997782 sd_pos=1282069 heater_bed: target=60 temp=60.0 pwm=0.304 sysload=0.24 cputime=5778.789 memavail=3266576 print_time=18776.787 buffer_time=2.130 print_stall=0 extruder: target=210 temp=210.0 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64743.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52907254 bytes_read=8527122 bytes_retransmit=9 bytes_invalid=0 send_seq=1020302 receive_seq=1020302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6925 freq=400007537 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114909 bytes_read=355836 bytes_retransmit=0 bytes_invalid=0 send_seq=19127 receive_seq=19127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998660 adj=49997801 sd_pos=1283912 heater_bed: target=60 temp=60.1 pwm=0.010 sysload=0.54 cputime=5778.913 memavail=3266328 print_time=18777.756 buffer_time=2.098 print_stall=0 extruder: target=210 temp=210.2 pwm=0.343
Stats 64744.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=52916929 bytes_read=8528179 bytes_retransmit=9 bytes_invalid=0 send_seq=1020473 receive_seq=1020473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=645 freq=400007565 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114915 bytes_read=355852 bytes_retransmit=0 bytes_invalid=0 send_seq=19128 receive_seq=19128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998663 adj=49997828 sd_pos=1285554 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.54 cputime=5779.027 memavail=3266328 print_time=18778.774 buffer_time=2.115 print_stall=0 extruder: target=210 temp=210.2 pwm=0.343
Stats 64745.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52920551 bytes_read=8528767 bytes_retransmit=9 bytes_invalid=0 send_seq=1020544 receive_seq=1020544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114921 bytes_read=355868 bytes_retransmit=0 bytes_invalid=0 send_seq=19129 receive_seq=19129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998668 adj=49997806 sd_pos=1287171 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.54 cputime=5779.106 memavail=3266328 print_time=18779.791 buffer_time=2.132 print_stall=0 extruder: target=210 temp=210.3 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64746.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52926565 bytes_read=8529523 bytes_retransmit=9 bytes_invalid=0 send_seq=1020652 receive_seq=1020652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=3553 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114927 bytes_read=355897 bytes_retransmit=0 bytes_invalid=0 send_seq=19130 receive_seq=19130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998674 adj=49997841 sd_pos=1289983 heater_bed: target=60 temp=60.0 pwm=0.274 sysload=0.54 cputime=5779.216 memavail=3266328 print_time=18781.254 buffer_time=2.576 print_stall=0 extruder: target=210 temp=210.4 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64747.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52929507 bytes_read=8530028 bytes_retransmit=9 bytes_invalid=0 send_seq=1020713 receive_seq=1020713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7804 freq=400007562 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114933 bytes_read=355913 bytes_retransmit=0 bytes_invalid=0 send_seq=19131 receive_seq=19131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998675 adj=49997860 sd_pos=1291713 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.54 cputime=5779.325 memavail=3266772 print_time=18782.160 buffer_time=2.482 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64748.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52935304 bytes_read=8530781 bytes_retransmit=9 bytes_invalid=0 send_seq=1020821 receive_seq=1020821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=6938 freq=400007550 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114939 bytes_read=355929 bytes_retransmit=0 bytes_invalid=0 send_seq=19132 receive_seq=19132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998674 adj=49997866 sd_pos=1292549 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.50 cputime=5779.398 memavail=3266836 print_time=18782.805 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
Stats 64749.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52943942 bytes_read=8531767 bytes_retransmit=9 bytes_invalid=0 send_seq=1020975 receive_seq=1020975 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=2608 freq=400007548 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114945 bytes_read=355945 bytes_retransmit=0 bytes_invalid=0 send_seq=19133 receive_seq=19133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998672 adj=49997872 sd_pos=1293189 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.50 cputime=5779.580 memavail=3266084 print_time=18783.701 buffer_time=2.021 print_stall=0 extruder: target=210 temp=210.2 pwm=0.339
Stats 64750.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52951427 bytes_read=8532650 bytes_retransmit=9 bytes_invalid=0 send_seq=1021108 receive_seq=1021108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=550 freq=400007557 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114951 bytes_read=355961 bytes_retransmit=0 bytes_invalid=0 send_seq=19134 receive_seq=19134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998672 adj=49997839 sd_pos=1293741 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.50 cputime=5779.769 memavail=3266084 print_time=18784.697 buffer_time=2.017 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64751.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52956328 bytes_read=8533322 bytes_retransmit=9 bytes_invalid=0 send_seq=1021199 receive_seq=1021199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=6075 freq=400007568 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=114957 bytes_read=355977 bytes_retransmit=0 bytes_invalid=0 send_seq=19135 receive_seq=19135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998672 adj=49997803 sd_pos=1296366 heater_bed: target=60 temp=60.0 pwm=0.215 sysload=0.50 cputime=5779.921 memavail=3266084 print_time=18786.059 buffer_time=2.378 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64752.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52961407 bytes_read=8534008 bytes_retransmit=9 bytes_invalid=0 send_seq=1021293 receive_seq=1021293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=8829 freq=400007554 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114963 bytes_read=356006 bytes_retransmit=0 bytes_invalid=0 send_seq=19136 receive_seq=19136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998671 adj=49997759 sd_pos=1298529 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.50 cputime=5780.125 memavail=3266084 print_time=18787.018 buffer_time=2.337 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64753.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52969098 bytes_read=8534880 bytes_retransmit=9 bytes_invalid=0 send_seq=1021427 receive_seq=1021427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=8788 freq=400007547 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114969 bytes_read=356022 bytes_retransmit=0 bytes_invalid=0 send_seq=19137 receive_seq=19137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998670 adj=49997758 sd_pos=1300809 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.54 cputime=5780.239 memavail=3266084 print_time=18787.775 buffer_time=2.093 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64754.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=52977252 bytes_read=8535772 bytes_retransmit=9 bytes_invalid=0 send_seq=1021562 receive_seq=1021562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=7675 freq=400007546 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114975 bytes_read=356038 bytes_retransmit=0 bytes_invalid=0 send_seq=19138 receive_seq=19138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998669 adj=49997752 sd_pos=1302685 heater_bed: target=60 temp=60.0 pwm=0.364 sysload=0.54 cputime=5780.403 memavail=3265844 print_time=18788.684 buffer_time=2.001 print_stall=0 extruder: target=210 temp=209.8 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64755.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52987640 bytes_read=8536919 bytes_retransmit=9 bytes_invalid=0 send_seq=1021745 receive_seq=1021745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4420 freq=400007553 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114981 bytes_read=356054 bytes_retransmit=0 bytes_invalid=0 send_seq=19139 receive_seq=19139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998670 adj=49997736 sd_pos=1304621 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.54 cputime=5780.509 memavail=3265852 print_time=18789.959 buffer_time=2.274 print_stall=0 extruder: target=210 temp=209.9 pwm=0.379
Stats 64756.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52994577 bytes_read=8537746 bytes_retransmit=9 bytes_invalid=0 send_seq=1021870 receive_seq=1021870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007549 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=114987 bytes_read=356070 bytes_retransmit=0 bytes_invalid=0 send_seq=19140 receive_seq=19140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998671 adj=49997743 sd_pos=1305881 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.54 cputime=5780.561 memavail=3265852 print_time=18790.711 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.9 pwm=0.379
Stats 64757.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=52997527 bytes_read=8538284 bytes_retransmit=9 bytes_invalid=0 send_seq=1021932 receive_seq=1021932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007551 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=114999 bytes_read=356115 bytes_retransmit=0 bytes_invalid=0 send_seq=19142 receive_seq=19142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998673 adj=49997753 sd_pos=1307528 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.54 cputime=5780.604 memavail=3266052 print_time=18791.734 buffer_time=2.048 print_stall=0 extruder: target=210 temp=209.8 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64758.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53003751 bytes_read=8539039 bytes_retransmit=9 bytes_invalid=0 send_seq=1022041 receive_seq=1022041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2180 freq=400007546 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115005 bytes_read=356131 bytes_retransmit=0 bytes_invalid=0 send_seq=19143 receive_seq=19143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998678 adj=49997777 sd_pos=1310149 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.50 cputime=5780.699 memavail=3269460 print_time=18793.062 buffer_time=2.374 print_stall=0 extruder: target=210 temp=209.8 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64759.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53006667 bytes_read=8539526 bytes_retransmit=9 bytes_invalid=0 send_seq=1022098 receive_seq=1022098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=6115 freq=400007559 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115011 bytes_read=356147 bytes_retransmit=0 bytes_invalid=0 send_seq=19144 receive_seq=19144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998680 adj=49997822 sd_pos=1311681 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.50 cputime=5780.797 memavail=3269460 print_time=18793.915 buffer_time=2.226 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64760.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53012448 bytes_read=8540289 bytes_retransmit=9 bytes_invalid=0 send_seq=1022204 receive_seq=1022204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=7015 freq=400007558 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115017 bytes_read=356163 bytes_retransmit=0 bytes_invalid=0 send_seq=19145 receive_seq=19145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998678 adj=49997816 sd_pos=1312760 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.50 cputime=5780.954 memavail=3268704 print_time=18794.827 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
Stats 64761.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53021307 bytes_read=8541280 bytes_retransmit=9 bytes_invalid=0 send_seq=1022359 receive_seq=1022359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3434 freq=400007556 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115023 bytes_read=356179 bytes_retransmit=0 bytes_invalid=0 send_seq=19146 receive_seq=19146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998678 adj=49997788 sd_pos=1313252 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.50 cputime=5781.144 memavail=3268708 print_time=18795.809 buffer_time=2.120 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64762.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53028580 bytes_read=8542127 bytes_retransmit=9 bytes_invalid=0 send_seq=1022488 receive_seq=1022488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2305 freq=400007566 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115029 bytes_read=356208 bytes_retransmit=0 bytes_invalid=0 send_seq=19147 receive_seq=19147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998679 adj=49997774 sd_pos=1314329 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.50 cputime=5781.341 memavail=3268708 print_time=18796.971 buffer_time=2.280 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64763.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53033738 bytes_read=8542784 bytes_retransmit=9 bytes_invalid=0 send_seq=1022576 receive_seq=1022576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2120 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115035 bytes_read=356224 bytes_retransmit=0 bytes_invalid=0 send_seq=19148 receive_seq=19148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998685 adj=49997763 sd_pos=1314877 heater_bed: target=60 temp=60.0 pwm=0.017 sysload=0.46 cputime=5781.496 memavail=3268708 print_time=18797.751 buffer_time=2.060 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64764.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53039092 bytes_read=8543495 bytes_retransmit=9 bytes_invalid=0 send_seq=1022675 receive_seq=1022675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9160 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115041 bytes_read=356240 bytes_retransmit=0 bytes_invalid=0 send_seq=19149 receive_seq=19149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998686 adj=49997825 sd_pos=1318695 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.46 cputime=5781.664 memavail=3268708 print_time=18799.127 buffer_time=2.436 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64765.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53045243 bytes_read=8544273 bytes_retransmit=9 bytes_invalid=0 send_seq=1022787 receive_seq=1022787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=11944 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115047 bytes_read=356256 bytes_retransmit=0 bytes_invalid=0 send_seq=19150 receive_seq=19150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49997788 sd_pos=1320895 heater_bed: target=60 temp=60.0 pwm=0.040 sysload=0.46 cputime=5781.902 memavail=3268468 print_time=18800.260 buffer_time=2.568 print_stall=0 extruder: target=210 temp=210.3 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64766.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53054209 bytes_read=8545285 bytes_retransmit=9 bytes_invalid=0 send_seq=1022946 receive_seq=1022946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=11320 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115053 bytes_read=356272 bytes_retransmit=0 bytes_invalid=0 send_seq=19151 receive_seq=19151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998687 adj=49997767 sd_pos=1323072 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.46 cputime=5782.004 memavail=3268468 print_time=18801.074 buffer_time=2.381 print_stall=0 extruder: target=210 temp=210.3 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64767.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53062224 bytes_read=8546211 bytes_retransmit=9 bytes_invalid=0 send_seq=1023088 receive_seq=1023088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=7343 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115059 bytes_read=356301 bytes_retransmit=0 bytes_invalid=0 send_seq=19152 receive_seq=19152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998686 adj=49997759 sd_pos=1324029 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.46 cputime=5782.065 memavail=3266452 print_time=18801.736 buffer_time=2.041 print_stall=0 extruder: target=210 temp=210.3 pwm=0.305
Stats 64768.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53072277 bytes_read=8547248 bytes_retransmit=9 bytes_invalid=0 send_seq=1023255 receive_seq=1023255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=783 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115065 bytes_read=356317 bytes_retransmit=0 bytes_invalid=0 send_seq=19153 receive_seq=19153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998683 adj=49997764 sd_pos=1325861 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.42 cputime=5782.127 memavail=3266460 print_time=18802.775 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.3 pwm=0.305
Stats 64769.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53076201 bytes_read=8547834 bytes_retransmit=9 bytes_invalid=0 send_seq=1023330 receive_seq=1023330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=400007727 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115071 bytes_read=356333 bytes_retransmit=0 bytes_invalid=0 send_seq=19154 receive_seq=19154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998681 adj=49997608 sd_pos=1327572 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.42 cputime=5782.166 memavail=3266208 print_time=18803.839 buffer_time=2.143 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64770.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53081757 bytes_read=8548525 bytes_retransmit=9 bytes_invalid=0 send_seq=1023425 receive_seq=1023425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007900 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115077 bytes_read=356349 bytes_retransmit=0 bytes_invalid=0 send_seq=19155 receive_seq=19155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998685 adj=49997521 sd_pos=1329289 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.42 cputime=5782.221 memavail=3266208 print_time=18804.757 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64771.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53084929 bytes_read=8549058 bytes_retransmit=9 bytes_invalid=0 send_seq=1023488 receive_seq=1023488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=8504 freq=400007881 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115083 bytes_read=356365 bytes_retransmit=0 bytes_invalid=0 send_seq=19156 receive_seq=19156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998686 adj=49997319 sd_pos=1332124 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.42 cputime=5782.342 memavail=3266208 print_time=18806.215 buffer_time=2.519 print_stall=0 extruder: target=210 temp=209.8 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64772.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53090838 bytes_read=8549780 bytes_retransmit=9 bytes_invalid=0 send_seq=1023589 receive_seq=1023589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9171 freq=400007852 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115089 bytes_read=356394 bytes_retransmit=0 bytes_invalid=0 send_seq=19157 receive_seq=19157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49997512 sd_pos=1334229 heater_bed: target=60 temp=60.0 pwm=0.301 sysload=0.42 cputime=5782.458 memavail=3266212 print_time=18807.094 buffer_time=2.396 print_stall=0 extruder: target=210 temp=209.6 pwm=0.425
Stats 64773.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53099474 bytes_read=8550761 bytes_retransmit=9 bytes_invalid=0 send_seq=1023742 receive_seq=1023742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4581 freq=400007957 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115095 bytes_read=356410 bytes_retransmit=0 bytes_invalid=0 send_seq=19158 receive_seq=19158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49997603 sd_pos=1336853 heater_bed: target=60 temp=60.0 pwm=0.022 sysload=0.39 cputime=5782.590 memavail=3266212 print_time=18807.891 buffer_time=2.193 print_stall=0 extruder: target=210 temp=209.5 pwm=0.425
Stats 64774.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53107723 bytes_read=8551688 bytes_retransmit=9 bytes_invalid=0 send_seq=1023887 receive_seq=1023887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2670 freq=400007939 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115101 bytes_read=356426 bytes_retransmit=0 bytes_invalid=0 send_seq=19159 receive_seq=19159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998690 adj=49997448 sd_pos=1340022 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.39 cputime=5782.732 memavail=3266212 print_time=18809.090 buffer_time=2.391 print_stall=0 extruder: target=210 temp=209.5 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64775.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53112631 bytes_read=8552350 bytes_retransmit=9 bytes_invalid=0 send_seq=1023976 receive_seq=1023976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2786 freq=400007912 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115107 bytes_read=356442 bytes_retransmit=0 bytes_invalid=0 send_seq=19160 receive_seq=19160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49997556 sd_pos=1341204 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.39 cputime=5782.882 memavail=3266212 print_time=18809.733 buffer_time=2.033 print_stall=0 extruder: target=210 temp=209.6 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64776.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53118360 bytes_read=8553112 bytes_retransmit=9 bytes_invalid=0 send_seq=1024082 receive_seq=1024082 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=9574 freq=400007878 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115113 bytes_read=356458 bytes_retransmit=0 bytes_invalid=0 send_seq=19161 receive_seq=19161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998688 adj=49997583 sd_pos=1344776 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.39 cputime=5783.108 memavail=3265988 print_time=18811.263 buffer_time=2.563 print_stall=0 extruder: target=210 temp=209.7 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64777.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53125026 bytes_read=8553914 bytes_retransmit=9 bytes_invalid=0 send_seq=1024202 receive_seq=1024202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=10188 freq=400007859 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=115119 bytes_read=356487 bytes_retransmit=0 bytes_invalid=0 send_seq=19162 receive_seq=19162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998688 adj=49997672 sd_pos=1346945 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.39 cputime=5783.230 memavail=3265512 print_time=18812.041 buffer_time=2.340 print_stall=0 extruder: target=210 temp=209.9 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64778.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53132942 bytes_read=8554836 bytes_retransmit=9 bytes_invalid=0 send_seq=1024343 receive_seq=1024343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=11967 freq=400007851 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=115125 bytes_read=356502 bytes_retransmit=0 bytes_invalid=0 send_seq=19163 receive_seq=19163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998688 adj=49997694 sd_pos=1349316 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.44 cputime=5783.412 memavail=3265524 print_time=18813.211 buffer_time=2.507 print_stall=0 extruder: target=210 temp=210.1 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64779.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53142312 bytes_read=8555850 bytes_retransmit=9 bytes_invalid=0 send_seq=1024503 receive_seq=1024503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=7265 freq=400007821 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=115131 bytes_read=356517 bytes_retransmit=0 bytes_invalid=0 send_seq=19164 receive_seq=19164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998687 adj=49997713 sd_pos=1350338 heater_bed: target=60 temp=60.0 pwm=0.048 sysload=0.44 cputime=5783.473 memavail=3265524 print_time=18813.849 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.2 pwm=0.305
Stats 64780.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53150287 bytes_read=8556774 bytes_retransmit=9 bytes_invalid=0 send_seq=1024645 receive_seq=1024645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=2695 freq=400007809 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=115137 bytes_read=356532 bytes_retransmit=0 bytes_invalid=0 send_seq=19165 receive_seq=19165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49997735 sd_pos=1352033 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.44 cputime=5783.556 memavail=3265524 print_time=18814.921 buffer_time=2.217 print_stall=0 extruder: target=210 temp=210.4 pwm=0.305
Stats 64781.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53155556 bytes_read=8557461 bytes_retransmit=9 bytes_invalid=0 send_seq=1024739 receive_seq=1024739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007803 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=115143 bytes_read=356547 bytes_retransmit=0 bytes_invalid=0 send_seq=19166 receive_seq=19166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998696 adj=49997782 sd_pos=1353287 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.44 cputime=5783.636 memavail=3265524 print_time=18815.724 buffer_time=2.019 print_stall=0 extruder: target=210 temp=210.4 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64782.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53161824 bytes_read=8558252 bytes_retransmit=9 bytes_invalid=0 send_seq=1024854 receive_seq=1024854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3626 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115149 bytes_read=356575 bytes_retransmit=0 bytes_invalid=0 send_seq=19167 receive_seq=19167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998705 adj=49997873 sd_pos=1356553 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.44 cputime=5783.758 memavail=3265524 print_time=18817.439 buffer_time=2.733 print_stall=0 extruder: target=210 temp=210.3 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64783.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53164572 bytes_read=8558694 bytes_retransmit=9 bytes_invalid=0 send_seq=1024902 receive_seq=1024902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=5294 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115155 bytes_read=356591 bytes_retransmit=0 bytes_invalid=0 send_seq=19168 receive_seq=19168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998706 adj=49997897 sd_pos=1357410 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.40 cputime=5783.838 memavail=3265524 print_time=18817.990 buffer_time=2.283 print_stall=0 extruder: target=210 temp=210.1 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64784.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53169188 bytes_read=8559301 bytes_retransmit=9 bytes_invalid=0 send_seq=1024980 receive_seq=1024980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=9588 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115161 bytes_read=356607 bytes_retransmit=0 bytes_invalid=0 send_seq=19169 receive_seq=19169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998704 adj=49997937 sd_pos=1359648 heater_bed: target=60 temp=60.0 pwm=0.400 sysload=0.40 cputime=5783.937 memavail=3265524 print_time=18819.100 buffer_time=2.385 print_stall=0 extruder: target=210 temp=209.9 pwm=0.363
Stats 64785.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53177843 bytes_read=8560247 bytes_retransmit=9 bytes_invalid=0 send_seq=1025126 receive_seq=1025126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=5540 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115167 bytes_read=356623 bytes_retransmit=0 bytes_invalid=0 send_seq=19170 receive_seq=19170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998703 adj=49997921 sd_pos=1362091 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.40 cputime=5784.000 memavail=3265524 print_time=18819.804 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.7 pwm=0.422
Stats 64786.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=53186491 bytes_read=8561220 bytes_retransmit=9 bytes_invalid=0 send_seq=1025277 receive_seq=1025277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3457 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115173 bytes_read=356639 bytes_retransmit=0 bytes_invalid=0 send_seq=19171 receive_seq=19171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998703 adj=49997942 sd_pos=1365271 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.40 cputime=5784.074 memavail=3265524 print_time=18820.999 buffer_time=2.283 print_stall=0 extruder: target=210 temp=209.6 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64787.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=53192513 bytes_read=8561977 bytes_retransmit=9 bytes_invalid=0 send_seq=1025385 receive_seq=1025385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3163 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115179 bytes_read=356668 bytes_retransmit=0 bytes_invalid=0 send_seq=19172 receive_seq=19172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998702 adj=49997902 sd_pos=1366540 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.40 cputime=5784.210 memavail=3265464 print_time=18821.950 buffer_time=2.233 print_stall=0 extruder: target=210 temp=209.6 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64788.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=53197527 bytes_read=8562618 bytes_retransmit=9 bytes_invalid=0 send_seq=1025470 receive_seq=1025470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=5101 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115185 bytes_read=356684 bytes_retransmit=0 bytes_invalid=0 send_seq=19173 receive_seq=19173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998700 adj=49997885 sd_pos=1368472 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.37 cputime=5784.313 memavail=3265028 print_time=18822.773 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.7 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64789.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=53204174 bytes_read=8563420 bytes_retransmit=9 bytes_invalid=0 send_seq=1025590 receive_seq=1025590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=9196 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115191 bytes_read=356700 bytes_retransmit=0 bytes_invalid=0 send_seq=19174 receive_seq=19174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998703 adj=49997882 sd_pos=1371301 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.37 cputime=5784.554 memavail=3265028 print_time=18823.927 buffer_time=2.209 print_stall=0 extruder: target=210 temp=209.8 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64790.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=53212471 bytes_read=8564374 bytes_retransmit=9 bytes_invalid=0 send_seq=1025738 receive_seq=1025738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=10866 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115197 bytes_read=356716 bytes_retransmit=0 bytes_invalid=0 send_seq=19175 receive_seq=19175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998702 adj=49997861 sd_pos=1374386 heater_bed: target=60 temp=60.0 pwm=0.352 sysload=0.37 cputime=5784.753 memavail=3265028 print_time=18825.153 buffer_time=2.435 print_stall=0 extruder: target=210 temp=209.9 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64791.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53222346 bytes_read=8565470 bytes_retransmit=9 bytes_invalid=0 send_seq=1025911 receive_seq=1025911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=9072 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=115203 bytes_read=356732 bytes_retransmit=0 bytes_invalid=0 send_seq=19176 receive_seq=19176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998701 adj=49997828 sd_pos=1376444 heater_bed: target=60 temp=60.0 pwm=0.255 sysload=0.37 cputime=5784.833 memavail=3265028 print_time=18825.868 buffer_time=2.149 print_stall=0 extruder: target=210 temp=210.1 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64792.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53230475 bytes_read=8566402 bytes_retransmit=9 bytes_invalid=0 send_seq=1026057 receive_seq=1026057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=5769 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115209 bytes_read=356761 bytes_retransmit=0 bytes_invalid=0 send_seq=19177 receive_seq=19177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998699 adj=49997842 sd_pos=1377806 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.37 cputime=5784.899 memavail=3265028 print_time=18826.804 buffer_time=2.084 print_stall=0 extruder: target=210 temp=210.3 pwm=0.308
Stats 64793.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53239820 bytes_read=8567444 bytes_retransmit=9 bytes_invalid=0 send_seq=1026222 receive_seq=1026222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115215 bytes_read=356777 bytes_retransmit=0 bytes_invalid=0 send_seq=19178 receive_seq=19178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998699 adj=49997822 sd_pos=1379454 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.34 cputime=5784.962 memavail=3265028 print_time=18827.878 buffer_time=2.158 print_stall=0 extruder: target=210 temp=210.3 pwm=0.308
Stats 64794.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53242820 bytes_read=8567970 bytes_retransmit=9 bytes_invalid=0 send_seq=1026284 receive_seq=1026284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115221 bytes_read=356793 bytes_retransmit=0 bytes_invalid=0 send_seq=19179 receive_seq=19179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998699 adj=49997817 sd_pos=1381136 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.34 cputime=5785.003 memavail=3265028 print_time=18828.925 buffer_time=2.203 print_stall=0 extruder: target=210 temp=210.4 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64795.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53248577 bytes_read=8568687 bytes_retransmit=9 bytes_invalid=0 send_seq=1026387 receive_seq=1026387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=3332 freq=400007765 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115227 bytes_read=356809 bytes_retransmit=0 bytes_invalid=0 send_seq=19180 receive_seq=19180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998699 adj=49997814 sd_pos=1383748 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.34 cputime=5785.102 memavail=3265044 print_time=18830.147 buffer_time=2.424 print_stall=0 extruder: target=210 temp=210.4 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64796.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53251474 bytes_read=8569215 bytes_retransmit=9 bytes_invalid=0 send_seq=1026446 receive_seq=1026446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=7642 freq=400007903 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115233 bytes_read=356825 bytes_retransmit=0 bytes_invalid=0 send_seq=19181 receive_seq=19181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998701 adj=49997619 sd_pos=1385621 heater_bed: target=60 temp=60.0 pwm=0.339 sysload=0.34 cputime=5785.202 memavail=3265044 print_time=18831.049 buffer_time=2.326 print_stall=0 extruder: target=210 temp=210.4 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64797.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53258343 bytes_read=8570046 bytes_retransmit=9 bytes_invalid=0 send_seq=1026570 receive_seq=1026569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=6066 freq=400008023 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115239 bytes_read=356854 bytes_retransmit=0 bytes_invalid=0 send_seq=19182 receive_seq=19182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998701 adj=49997457 sd_pos=1387196 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.34 cputime=5785.324 memavail=3264228 print_time=18831.760 buffer_time=2.036 print_stall=0 extruder: target=210 temp=210.3 pwm=0.347
Stats 64798.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53266705 bytes_read=8570963 bytes_retransmit=9 bytes_invalid=0 send_seq=1026712 receive_seq=1026712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4098 freq=400007993 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115245 bytes_read=356870 bytes_retransmit=0 bytes_invalid=0 send_seq=19183 receive_seq=19183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998701 adj=49997260 sd_pos=1390505 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.31 cputime=5785.455 memavail=3264288 print_time=18832.863 buffer_time=2.137 print_stall=0 extruder: target=210 temp=210.1 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64799.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53273788 bytes_read=8571800 bytes_retransmit=9 bytes_invalid=0 send_seq=1026836 receive_seq=1026836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=3781 freq=400007976 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115251 bytes_read=356886 bytes_retransmit=0 bytes_invalid=0 send_seq=19184 receive_seq=19184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998707 adj=49997421 sd_pos=1393724 heater_bed: target=60 temp=60.0 pwm=0.277 sysload=0.31 cputime=5785.590 memavail=3264288 print_time=18834.100 buffer_time=2.374 print_stall=0 extruder: target=210 temp=210.0 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64800.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53279831 bytes_read=8572571 bytes_retransmit=9 bytes_invalid=0 send_seq=1026947 receive_seq=1026947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4899 freq=400007963 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115257 bytes_read=356902 bytes_retransmit=0 bytes_invalid=0 send_seq=19185 receive_seq=19185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998712 adj=49997589 sd_pos=1395120 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.31 cputime=5785.835 memavail=3264288 print_time=18835.064 buffer_time=2.337 print_stall=0 extruder: target=210 temp=209.8 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64801.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53285157 bytes_read=8573275 bytes_retransmit=9 bytes_invalid=0 send_seq=1027045 receive_seq=1027045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=6911 freq=400007937 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115263 bytes_read=356918 bytes_retransmit=0 bytes_invalid=0 send_seq=19186 receive_seq=19186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998713 adj=49997690 sd_pos=1397094 heater_bed: target=60 temp=60.0 pwm=0.317 sysload=0.31 cputime=5785.943 memavail=3263932 print_time=18835.828 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64802.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53291789 bytes_read=8574106 bytes_retransmit=9 bytes_invalid=0 send_seq=1027165 receive_seq=1027165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=10171 freq=400007906 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115269 bytes_read=356947 bytes_retransmit=0 bytes_invalid=0 send_seq=19187 receive_seq=19187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998710 adj=49997738 sd_pos=1399147 heater_bed: target=60 temp=60.0 pwm=0.028 sysload=0.31 cputime=5786.095 memavail=3263032 print_time=18836.950 buffer_time=2.222 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64803.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53301649 bytes_read=8575133 bytes_retransmit=9 bytes_invalid=0 send_seq=1027330 receive_seq=1027330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8779 freq=400007876 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115275 bytes_read=356963 bytes_retransmit=0 bytes_invalid=0 send_seq=19188 receive_seq=19188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998709 adj=49997752 sd_pos=1401151 heater_bed: target=60 temp=60.0 pwm=0.251 sysload=0.29 cputime=5786.212 memavail=3263036 print_time=18837.870 buffer_time=2.141 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64804.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53311170 bytes_read=8576165 bytes_retransmit=9 bytes_invalid=0 send_seq=1027496 receive_seq=1027496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11227 freq=400007853 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115281 bytes_read=356979 bytes_retransmit=0 bytes_invalid=0 send_seq=19189 receive_seq=19189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998708 adj=49997781 sd_pos=1404304 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.29 cputime=5786.354 memavail=3263036 print_time=18839.184 buffer_time=2.455 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
Stats 64805.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53319566 bytes_read=8577157 bytes_retransmit=9 bytes_invalid=0 send_seq=1027645 receive_seq=1027645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6478 freq=400007814 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115287 bytes_read=356995 bytes_retransmit=0 bytes_invalid=0 send_seq=19190 receive_seq=19190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998707 adj=49997776 sd_pos=1405635 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.29 cputime=5786.442 memavail=3263776 print_time=18839.962 buffer_time=2.232 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
Stats 64806.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53328940 bytes_read=8578179 bytes_retransmit=9 bytes_invalid=0 send_seq=1027809 receive_seq=1027809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007799 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115293 bytes_read=357011 bytes_retransmit=0 bytes_invalid=0 send_seq=19191 receive_seq=19191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998709 adj=49997823 sd_pos=1406869 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.29 cputime=5786.555 memavail=3267448 print_time=18840.757 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
Stats 64807.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53331928 bytes_read=8578686 bytes_retransmit=9 bytes_invalid=0 send_seq=1027870 receive_seq=1027870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007869 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115299 bytes_read=357040 bytes_retransmit=0 bytes_invalid=0 send_seq=19192 receive_seq=19192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998709 adj=49997865 sd_pos=1408580 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.29 cputime=5786.619 memavail=3266640 print_time=18841.828 buffer_time=2.096 print_stall=0 extruder: target=210 temp=209.9 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64808.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53337964 bytes_read=8579472 bytes_retransmit=9 bytes_invalid=0 send_seq=1027981 receive_seq=1027981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2127 freq=400007854 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115305 bytes_read=357056 bytes_retransmit=0 bytes_invalid=0 send_seq=19193 receive_seq=19193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998717 adj=49997735 sd_pos=1410724 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.26 cputime=5786.733 memavail=3266700 print_time=18843.072 buffer_time=2.340 print_stall=0 extruder: target=210 temp=210.1 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64809.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53340813 bytes_read=8579949 bytes_retransmit=9 bytes_invalid=0 send_seq=1028036 receive_seq=1028036 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=10003 freq=400007841 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115311 bytes_read=357072 bytes_retransmit=0 bytes_invalid=0 send_seq=19194 receive_seq=19194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998721 adj=49997835 sd_pos=1413895 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.26 cputime=5786.849 memavail=3266700 print_time=18844.382 buffer_time=2.648 print_stall=0 extruder: target=210 temp=210.3 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64810.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53347130 bytes_read=8580732 bytes_retransmit=9 bytes_invalid=0 send_seq=1028149 receive_seq=1028149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=9391 freq=400007818 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115317 bytes_read=357088 bytes_retransmit=0 bytes_invalid=0 send_seq=19195 receive_seq=19195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998724 adj=49997870 sd_pos=1415763 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.26 cputime=5786.961 memavail=3266700 print_time=18845.171 buffer_time=2.437 print_stall=0 extruder: target=210 temp=210.4 pwm=0.349
Stats 64811.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53355913 bytes_read=8581747 bytes_retransmit=9 bytes_invalid=0 send_seq=1028306 receive_seq=1028306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5354 freq=400007864 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=115323 bytes_read=357104 bytes_retransmit=0 bytes_invalid=0 send_seq=19196 receive_seq=19196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998729 adj=49997928 sd_pos=1417896 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.26 cputime=5787.083 memavail=3266700 print_time=18845.868 buffer_time=2.133 print_stall=0 extruder: target=210 temp=210.6 pwm=0.298
Stats 64812.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53364224 bytes_read=8582675 bytes_retransmit=9 bytes_invalid=0 send_seq=1028452 receive_seq=1028452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2751 freq=400007903 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115329 bytes_read=357133 bytes_retransmit=0 bytes_invalid=0 send_seq=19197 receive_seq=19197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998733 adj=49997914 sd_pos=1421257 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.26 cputime=5787.216 memavail=3266700 print_time=18846.881 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.6 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64813.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53370276 bytes_read=8583437 bytes_retransmit=9 bytes_invalid=0 send_seq=1028564 receive_seq=1028564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2513 freq=400007879 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115335 bytes_read=357149 bytes_retransmit=0 bytes_invalid=0 send_seq=19198 receive_seq=19198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998735 adj=49997871 sd_pos=1422361 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.24 cputime=5787.413 memavail=3266196 print_time=18847.776 buffer_time=2.040 print_stall=0 extruder: target=210 temp=210.6 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64814.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53375472 bytes_read=8584138 bytes_retransmit=9 bytes_invalid=0 send_seq=1028658 receive_seq=1028658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=7072 freq=400007842 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115341 bytes_read=357165 bytes_retransmit=0 bytes_invalid=0 send_seq=19199 receive_seq=19199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998731 adj=49997918 sd_pos=1424893 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.24 cputime=5787.572 memavail=3266196 print_time=18848.932 buffer_time=2.195 print_stall=0 extruder: target=210 temp=210.5 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64815.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53382277 bytes_read=8584950 bytes_retransmit=9 bytes_invalid=0 send_seq=1028780 receive_seq=1028780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=10056 freq=400007811 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115347 bytes_read=357181 bytes_retransmit=0 bytes_invalid=0 send_seq=19200 receive_seq=19200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998729 adj=49997886 sd_pos=1427669 heater_bed: target=60 temp=60.0 pwm=0.029 sysload=0.24 cputime=5787.693 memavail=3265948 print_time=18849.926 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.5 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64816.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53391127 bytes_read=8585943 bytes_retransmit=9 bytes_invalid=0 send_seq=1028935 receive_seq=1028935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=10444 freq=400007788 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115353 bytes_read=357197 bytes_retransmit=0 bytes_invalid=0 send_seq=19201 receive_seq=19201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998727 adj=49997886 sd_pos=1429437 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.24 cputime=5787.872 memavail=3265704 print_time=18851.066 buffer_time=2.328 print_stall=0 extruder: target=210 temp=210.3 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64817.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53401017 bytes_read=8587039 bytes_retransmit=9 bytes_invalid=0 send_seq=1029108 receive_seq=1029108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8150 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115359 bytes_read=357226 bytes_retransmit=0 bytes_invalid=0 send_seq=19202 receive_seq=19202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998725 adj=49997857 sd_pos=1431667 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.24 cputime=5787.986 memavail=3265200 print_time=18851.820 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.0 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64818.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53409130 bytes_read=8587961 bytes_retransmit=9 bytes_invalid=0 send_seq=1029252 receive_seq=1029252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=8584 freq=400007733 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115365 bytes_read=357242 bytes_retransmit=0 bytes_invalid=0 send_seq=19203 receive_seq=19203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998724 adj=49997876 sd_pos=1433512 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5788.075 memavail=3265208 print_time=18852.803 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.6 pwm=0.430
Stats 64819.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53418926 bytes_read=8589008 bytes_retransmit=9 bytes_invalid=0 send_seq=1029421 receive_seq=1029421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2232 freq=400007725 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115371 bytes_read=357258 bytes_retransmit=0 bytes_invalid=0 send_seq=19204 receive_seq=19204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998727 adj=49997885 sd_pos=1435104 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.22 cputime=5788.198 memavail=3265208 print_time=18853.838 buffer_time=2.096 print_stall=0 extruder: target=210 temp=209.5 pwm=0.430
Stats 64820.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53424332 bytes_read=8589689 bytes_retransmit=9 bytes_invalid=0 send_seq=1029511 receive_seq=1029511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115377 bytes_read=357274 bytes_retransmit=0 bytes_invalid=0 send_seq=19205 receive_seq=19205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998733 adj=49997902 sd_pos=1436854 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.22 cputime=5788.290 memavail=3265212 print_time=18854.904 buffer_time=2.161 print_stall=0 extruder: target=210 temp=209.3 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64821.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53430282 bytes_read=8590467 bytes_retransmit=9 bytes_invalid=0 send_seq=1029623 receive_seq=1029623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2526 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115383 bytes_read=357290 bytes_retransmit=0 bytes_invalid=0 send_seq=19206 receive_seq=19206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998738 adj=49997940 sd_pos=1440087 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.22 cputime=5788.396 memavail=3265212 print_time=18856.302 buffer_time=2.558 print_stall=0 extruder: target=210 temp=209.2 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64822.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53433174 bytes_read=8590962 bytes_retransmit=9 bytes_invalid=0 send_seq=1029682 receive_seq=1029682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=4087 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115389 bytes_read=357319 bytes_retransmit=0 bytes_invalid=0 send_seq=19207 receive_seq=19207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998738 adj=49997935 sd_pos=1441134 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5788.486 memavail=3265212 print_time=18856.856 buffer_time=2.112 print_stall=0 extruder: target=210 temp=209.3 pwm=0.407
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64823.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53437859 bytes_read=8591629 bytes_retransmit=9 bytes_invalid=0 send_seq=1029770 receive_seq=1029770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8989 freq=400007709 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115395 bytes_read=357335 bytes_retransmit=0 bytes_invalid=0 send_seq=19208 receive_seq=19208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998739 adj=49997949 sd_pos=1443877 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.20 cputime=5788.594 memavail=3265212 print_time=18858.120 buffer_time=2.376 print_stall=0 extruder: target=210 temp=209.5 pwm=0.407
Stats 64824.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53446236 bytes_read=8592576 bytes_retransmit=9 bytes_invalid=0 send_seq=1029919 receive_seq=1029919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=5696 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115401 bytes_read=357351 bytes_retransmit=0 bytes_invalid=0 send_seq=19209 receive_seq=19209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998737 adj=49997934 sd_pos=1446290 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.20 cputime=5788.656 memavail=3265212 print_time=18858.827 buffer_time=2.082 print_stall=0 extruder: target=210 temp=209.7 pwm=0.341
Stats 64825.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53454745 bytes_read=8593549 bytes_retransmit=9 bytes_invalid=0 send_seq=1030070 receive_seq=1030070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3220 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115407 bytes_read=357367 bytes_retransmit=0 bytes_invalid=0 send_seq=19210 receive_seq=19210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998734 adj=49997926 sd_pos=1449566 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.20 cputime=5788.729 memavail=3265212 print_time=18859.945 buffer_time=2.199 print_stall=0 extruder: target=210 temp=209.9 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64826.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53461229 bytes_read=8594371 bytes_retransmit=9 bytes_invalid=0 send_seq=1030186 receive_seq=1030186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3017 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115419 bytes_read=357399 bytes_retransmit=0 bytes_invalid=0 send_seq=19212 receive_seq=19212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998730 adj=49997821 sd_pos=1451168 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.20 cputime=5788.867 memavail=3265212 print_time=18860.955 buffer_time=2.209 print_stall=0 extruder: target=210 temp=210.2 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64827.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53466436 bytes_read=8595037 bytes_retransmit=9 bytes_invalid=0 send_seq=1030282 receive_seq=1030281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=12765 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115425 bytes_read=357428 bytes_retransmit=0 bytes_invalid=0 send_seq=19213 receive_seq=19213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998730 adj=49997783 sd_pos=1455514 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.20 cputime=5789.047 memavail=3264460 print_time=18862.631 buffer_time=2.844 print_stall=0 extruder: target=210 temp=210.4 pwm=0.288
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64828.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53473115 bytes_read=8595875 bytes_retransmit=9 bytes_invalid=0 send_seq=1030403 receive_seq=1030403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=12295 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115431 bytes_read=357444 bytes_retransmit=0 bytes_invalid=0 send_seq=19214 receive_seq=19214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998728 adj=49997745 sd_pos=1457045 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.27 cputime=5789.204 memavail=3264464 print_time=18863.219 buffer_time=2.433 print_stall=0 extruder: target=210 temp=210.6 pwm=0.288
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64829.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53481430 bytes_read=8596806 bytes_retransmit=9 bytes_invalid=0 send_seq=1030546 receive_seq=1030546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=14586 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115437 bytes_read=357460 bytes_retransmit=0 bytes_invalid=0 send_seq=19215 receive_seq=19215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998727 adj=49997742 sd_pos=1459204 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.27 cputime=5789.391 memavail=3264464 print_time=18864.530 buffer_time=2.743 print_stall=0 extruder: target=210 temp=210.6 pwm=0.288
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64830.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53491811 bytes_read=8597894 bytes_retransmit=9 bytes_invalid=0 send_seq=1030720 receive_seq=1030720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=10679 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115443 bytes_read=357476 bytes_retransmit=0 bytes_invalid=0 send_seq=19216 receive_seq=19216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998724 adj=49997767 sd_pos=1460802 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.27 cputime=5789.510 memavail=3264216 print_time=18865.235 buffer_time=2.447 print_stall=0 extruder: target=210 temp=210.5 pwm=0.288
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64831.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53499571 bytes_read=8598796 bytes_retransmit=9 bytes_invalid=0 send_seq=1030857 receive_seq=1030857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=9934 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=115449 bytes_read=357492 bytes_retransmit=0 bytes_invalid=0 send_seq=19217 receive_seq=19217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998722 adj=49997775 sd_pos=1462687 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.27 cputime=5789.579 memavail=3264216 print_time=18865.849 buffer_time=2.061 print_stall=0 extruder: target=210 temp=210.3 pwm=0.341
Stats 64832.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53509359 bytes_read=8599867 bytes_retransmit=9 bytes_invalid=0 send_seq=1031028 receive_seq=1031028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=4573 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=115455 bytes_read=357521 bytes_retransmit=0 bytes_invalid=0 send_seq=19218 receive_seq=19218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998720 adj=49997769 sd_pos=1464365 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.27 cputime=5789.643 memavail=3264216 print_time=18867.004 buffer_time=2.215 print_stall=0 extruder: target=210 temp=210.1 pwm=0.412
Stats 64833.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53517324 bytes_read=8600769 bytes_retransmit=9 bytes_invalid=0 send_seq=1031169 receive_seq=1031169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=115461 bytes_read=357537 bytes_retransmit=0 bytes_invalid=0 send_seq=19219 receive_seq=19219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998721 adj=49997781 sd_pos=1466141 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.25 cputime=5789.705 memavail=3264216 print_time=18868.034 buffer_time=2.244 print_stall=0 extruder: target=210 temp=209.7 pwm=0.412
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64834.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53519882 bytes_read=8601255 bytes_retransmit=9 bytes_invalid=0 send_seq=1031223 receive_seq=1031223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=115467 bytes_read=357553 bytes_retransmit=0 bytes_invalid=0 send_seq=19220 receive_seq=19220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998732 adj=49997774 sd_pos=1467398 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.25 cputime=5789.763 memavail=3264216 print_time=18868.844 buffer_time=2.054 print_stall=0 extruder: target=210 temp=209.5 pwm=0.467
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64835.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53525907 bytes_read=8602042 bytes_retransmit=9 bytes_invalid=0 send_seq=1031334 receive_seq=1031334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=5552 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=115473 bytes_read=357569 bytes_retransmit=0 bytes_invalid=0 send_seq=19221 receive_seq=19221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998734 adj=49997891 sd_pos=1470369 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.25 cputime=5789.890 memavail=3264216 print_time=18870.281 buffer_time=2.471 print_stall=0 extruder: target=210 temp=209.3 pwm=0.467
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64836.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53529256 bytes_read=8602574 bytes_retransmit=9 bytes_invalid=0 send_seq=1031400 receive_seq=1031400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=8419 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=115479 bytes_read=357585 bytes_retransmit=0 bytes_invalid=0 send_seq=19222 receive_seq=19222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998742 adj=49997786 sd_pos=1472339 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.25 cputime=5789.978 memavail=3264216 print_time=18870.997 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.4 pwm=0.467
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64837.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53537724 bytes_read=8603536 bytes_retransmit=9 bytes_invalid=0 send_seq=1031549 receive_seq=1031549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=6388 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115485 bytes_read=357614 bytes_retransmit=0 bytes_invalid=0 send_seq=19223 receive_seq=19223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997873 sd_pos=1474784 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.25 cputime=5790.103 memavail=3264236 print_time=18871.873 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.4 pwm=0.403
Stats 64838.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53546295 bytes_read=8604512 bytes_retransmit=9 bytes_invalid=0 send_seq=1031701 receive_seq=1031701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5263 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115491 bytes_read=357630 bytes_retransmit=0 bytes_invalid=0 send_seq=19224 receive_seq=19224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997927 sd_pos=1478954 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.39 cputime=5790.254 memavail=3264236 print_time=18873.201 buffer_time=2.388 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64839.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53553621 bytes_read=8605369 bytes_retransmit=9 bytes_invalid=0 send_seq=1031832 receive_seq=1031832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2631 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115497 bytes_read=357646 bytes_retransmit=0 bytes_invalid=0 send_seq=19225 receive_seq=19225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997884 sd_pos=1481115 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.39 cputime=5790.385 memavail=3264236 print_time=18874.051 buffer_time=2.237 print_stall=0 extruder: target=210 temp=209.9 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64840.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53558766 bytes_read=8606072 bytes_retransmit=9 bytes_invalid=0 send_seq=1031926 receive_seq=1031926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=4747 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115503 bytes_read=357662 bytes_retransmit=0 bytes_invalid=0 send_seq=19226 receive_seq=19226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998746 adj=49997789 sd_pos=1482557 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.39 cputime=5790.586 memavail=3264236 print_time=18874.977 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.3 pwm=0.287
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64841.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53564043 bytes_read=8606773 bytes_retransmit=9 bytes_invalid=0 send_seq=1032023 receive_seq=1032023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15122 freq=400007743 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115509 bytes_read=357678 bytes_retransmit=0 bytes_invalid=0 send_seq=19227 receive_seq=19227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998746 adj=49997812 sd_pos=1487134 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.39 cputime=5790.745 memavail=3264236 print_time=18876.671 buffer_time=2.857 print_stall=0 extruder: target=210 temp=210.6 pwm=0.287
Stats 64842.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53572205 bytes_read=8607695 bytes_retransmit=9 bytes_invalid=0 send_seq=1032167 receive_seq=1032167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=9742 freq=400007759 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=115515 bytes_read=357707 bytes_retransmit=0 bytes_invalid=0 send_seq=19228 receive_seq=19228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998743 adj=49997800 sd_pos=1487134 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.39 cputime=5790.852 memavail=3264236 print_time=18876.965 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.9 pwm=0.287
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64843.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53581674 bytes_read=8608702 bytes_retransmit=9 bytes_invalid=0 send_seq=1032325 receive_seq=1032325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=13411 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=115521 bytes_read=357723 bytes_retransmit=0 bytes_invalid=0 send_seq=19229 receive_seq=19229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998740 adj=49997749 sd_pos=1490891 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.36 cputime=5791.039 memavail=3264236 print_time=18878.479 buffer_time=2.663 print_stall=0 extruder: target=210 temp=210.9 pwm=0.287
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64844.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53591517 bytes_read=8609768 bytes_retransmit=9 bytes_invalid=0 send_seq=1032496 receive_seq=1032496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=12345 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=115527 bytes_read=357739 bytes_retransmit=0 bytes_invalid=0 send_seq=19230 receive_seq=19230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998738 adj=49997754 sd_pos=1493172 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.36 cputime=5791.128 memavail=3264500 print_time=18879.323 buffer_time=2.506 print_stall=0 extruder: target=210 temp=210.9 pwm=0.309
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64845.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53599804 bytes_read=8610721 bytes_retransmit=9 bytes_invalid=0 send_seq=1032643 receive_seq=1032643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=8008 freq=400007768 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=115533 bytes_read=357755 bytes_retransmit=0 bytes_invalid=0 send_seq=19231 receive_seq=19231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998740 adj=49997762 sd_pos=1494112 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.36 cputime=5791.233 memavail=3265240 print_time=18879.979 buffer_time=2.162 print_stall=0 extruder: target=210 temp=210.7 pwm=0.309
Stats 64846.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53609635 bytes_read=8611798 bytes_retransmit=9 bytes_invalid=0 send_seq=1032815 receive_seq=1032815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1796 freq=400007840 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=115539 bytes_read=357771 bytes_retransmit=0 bytes_invalid=0 send_seq=19232 receive_seq=19232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998742 adj=49997708 sd_pos=1495738 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.36 cputime=5791.354 memavail=3265256 print_time=18881.042 buffer_time=2.224 print_stall=0 extruder: target=210 temp=210.3 pwm=0.395
Stats 64847.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53614410 bytes_read=8612449 bytes_retransmit=9 bytes_invalid=0 send_seq=1032902 receive_seq=1032902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=400007845 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115545 bytes_read=357800 bytes_retransmit=0 bytes_invalid=0 send_seq=19233 receive_seq=19233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998744 adj=49997634 sd_pos=1497266 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.36 cputime=5791.436 memavail=3266000 print_time=18882.079 buffer_time=2.260 print_stall=0 extruder: target=210 temp=210.1 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64848.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53620032 bytes_read=8613151 bytes_retransmit=9 bytes_invalid=0 send_seq=1033002 receive_seq=1033002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=888 freq=400007819 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115551 bytes_read=357816 bytes_retransmit=0 bytes_invalid=0 send_seq=19234 receive_seq=19234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998744 adj=49997670 sd_pos=1499224 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.33 cputime=5791.537 memavail=3266016 print_time=18883.066 buffer_time=2.247 print_stall=0 extruder: target=210 temp=209.7 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64849.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53622836 bytes_read=8613648 bytes_retransmit=9 bytes_invalid=0 send_seq=1033058 receive_seq=1033058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=9571 freq=400007834 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115557 bytes_read=357832 bytes_retransmit=0 bytes_invalid=0 send_seq=19235 receive_seq=19235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997723 sd_pos=1502618 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.33 cputime=5791.679 memavail=3266016 print_time=18884.533 buffer_time=2.713 print_stall=0 extruder: target=210 temp=209.6 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64850.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53628304 bytes_read=8614380 bytes_retransmit=9 bytes_invalid=0 send_seq=1033158 receive_seq=1033158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=7970 freq=400007816 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115563 bytes_read=357848 bytes_retransmit=0 bytes_invalid=0 send_seq=19236 receive_seq=19236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997750 sd_pos=1503425 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.33 cputime=5791.777 memavail=3266016 print_time=18884.919 buffer_time=2.098 print_stall=0 extruder: target=210 temp=209.4 pwm=0.421
Stats 64851.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53637107 bytes_read=8615352 bytes_retransmit=9 bytes_invalid=0 send_seq=1033312 receive_seq=1033312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6653 freq=400007800 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=115569 bytes_read=357864 bytes_retransmit=0 bytes_invalid=0 send_seq=19237 receive_seq=19237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998756 adj=49997851 sd_pos=1506949 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.33 cputime=5791.916 memavail=3266016 print_time=18886.110 buffer_time=2.275 print_stall=0 extruder: target=210 temp=209.4 pwm=0.421
Stats 64852.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53645847 bytes_read=8616343 bytes_retransmit=9 bytes_invalid=0 send_seq=1033464 receive_seq=1033464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1760 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115575 bytes_read=357893 bytes_retransmit=0 bytes_invalid=0 send_seq=19238 receive_seq=19238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998761 adj=49997891 sd_pos=1509004 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.33 cputime=5792.038 memavail=3266016 print_time=18886.843 buffer_time=2.007 print_stall=0 extruder: target=210 temp=209.4 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64853.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53651814 bytes_read=8617085 bytes_retransmit=9 bytes_invalid=0 send_seq=1033572 receive_seq=1033572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=2035 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115581 bytes_read=357909 bytes_retransmit=0 bytes_invalid=0 send_seq=19239 receive_seq=19239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998758 adj=49997991 sd_pos=1511454 heater_bed: target=60 temp=60.0 pwm=0.021 sysload=0.38 cputime=5792.198 memavail=3265516 print_time=18887.856 buffer_time=2.020 print_stall=0 extruder: target=210 temp=209.6 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64854.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53657197 bytes_read=8617796 bytes_retransmit=9 bytes_invalid=0 send_seq=1033671 receive_seq=1033671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=14861 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115587 bytes_read=357925 bytes_retransmit=0 bytes_invalid=0 send_seq=19240 receive_seq=19240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997948 sd_pos=1517128 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.38 cputime=5792.524 memavail=3264760 print_time=18889.964 buffer_time=3.079 print_stall=0 extruder: target=210 temp=209.7 pwm=0.365
Stats 64855.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53663870 bytes_read=8618624 bytes_retransmit=9 bytes_invalid=0 send_seq=1033791 receive_seq=1033791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=8977 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115593 bytes_read=357941 bytes_retransmit=0 bytes_invalid=0 send_seq=19241 receive_seq=19241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997835 sd_pos=1517128 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.38 cputime=5792.563 memavail=3264760 print_time=18889.964 buffer_time=2.078 print_stall=0 extruder: target=210 temp=210.0 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64856.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53672298 bytes_read=8619581 bytes_retransmit=9 bytes_invalid=0 send_seq=1033939 receive_seq=1033939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=19004 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=115599 bytes_read=357957 bytes_retransmit=0 bytes_invalid=0 send_seq=19242 receive_seq=19242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997826 sd_pos=1522824 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.38 cputime=5792.831 memavail=3264760 print_time=18892.043 buffer_time=3.085 print_stall=0 extruder: target=210 temp=210.2 pwm=0.302
Stats 64857.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53683251 bytes_read=8620747 bytes_retransmit=9 bytes_invalid=0 send_seq=1034129 receive_seq=1034129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9163 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115605 bytes_read=357986 bytes_retransmit=0 bytes_invalid=0 send_seq=19243 receive_seq=19243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998748 adj=49997828 sd_pos=1522824 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.38 cputime=5792.880 memavail=3264516 print_time=18892.043 buffer_time=2.084 print_stall=0 extruder: target=210 temp=210.4 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64858.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53691262 bytes_read=8621654 bytes_retransmit=9 bytes_invalid=0 send_seq=1034270 receive_seq=1034270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16585 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115611 bytes_read=358002 bytes_retransmit=0 bytes_invalid=0 send_seq=19244 receive_seq=19244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998746 adj=49997825 sd_pos=1525442 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.35 cputime=5792.986 memavail=3264512 print_time=18893.628 buffer_time=2.669 print_stall=0 extruder: target=210 temp=210.3 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64859.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53702219 bytes_read=8622831 bytes_retransmit=9 bytes_invalid=0 send_seq=1034462 receive_seq=1034462 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=9386 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115617 bytes_read=358018 bytes_retransmit=0 bytes_invalid=0 send_seq=19245 receive_seq=19245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997828 sd_pos=1525910 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.35 cputime=5793.098 memavail=3264512 print_time=18894.045 buffer_time=2.085 print_stall=0 extruder: target=210 temp=210.4 pwm=0.302
Stats 64860.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53711784 bytes_read=8623893 bytes_retransmit=9 bytes_invalid=0 send_seq=1034629 receive_seq=1034628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3725 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115623 bytes_read=358034 bytes_retransmit=0 bytes_invalid=0 send_seq=19246 receive_seq=19246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997867 sd_pos=1527540 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.35 cputime=5793.215 memavail=3264512 print_time=18895.124 buffer_time=2.164 print_stall=0 extruder: target=210 temp=210.2 pwm=0.353
Stats 64861.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53719031 bytes_read=8624750 bytes_retransmit=9 bytes_invalid=0 send_seq=1034759 receive_seq=1034759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115629 bytes_read=358050 bytes_retransmit=0 bytes_invalid=0 send_seq=19247 receive_seq=19247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997883 sd_pos=1529162 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.35 cputime=5793.318 memavail=3264272 print_time=18896.207 buffer_time=2.246 print_stall=0 extruder: target=210 temp=210.1 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64862.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53724630 bytes_read=8625487 bytes_retransmit=9 bytes_invalid=0 send_seq=1034863 receive_seq=1034863 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2003 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=115635 bytes_read=358079 bytes_retransmit=0 bytes_invalid=0 send_seq=19248 receive_seq=19248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997873 sd_pos=1531576 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=0.35 cputime=5793.430 memavail=3265900 print_time=18897.493 buffer_time=2.497 print_stall=0 extruder: target=210 temp=210.0 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64863.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53727680 bytes_read=8625993 bytes_retransmit=9 bytes_invalid=0 send_seq=1034921 receive_seq=1034921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=4478 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=115641 bytes_read=358095 bytes_retransmit=0 bytes_invalid=0 send_seq=19249 receive_seq=19249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997865 sd_pos=1533093 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.32 cputime=5793.478 memavail=3266036 print_time=18898.154 buffer_time=2.157 print_stall=0 extruder: target=210 temp=209.9 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64864.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53732266 bytes_read=8626610 bytes_retransmit=9 bytes_invalid=0 send_seq=1035004 receive_seq=1035004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=6928 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=115647 bytes_read=358110 bytes_retransmit=0 bytes_invalid=0 send_seq=19250 receive_seq=19250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998748 adj=49997854 sd_pos=1534821 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.32 cputime=5793.533 memavail=3265788 print_time=18899.018 buffer_time=2.020 print_stall=0 extruder: target=210 temp=209.8 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64865.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53740696 bytes_read=8627579 bytes_retransmit=9 bytes_invalid=0 send_seq=1035152 receive_seq=1035152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=6600 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=115653 bytes_read=358125 bytes_retransmit=0 bytes_invalid=0 send_seq=19251 receive_seq=19251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998748 adj=49997831 sd_pos=1537233 heater_bed: target=60 temp=60.0 pwm=0.253 sysload=0.32 cputime=5793.606 memavail=3265788 print_time=18900.074 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
Stats 64866.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53749270 bytes_read=8628553 bytes_retransmit=9 bytes_invalid=0 send_seq=1035304 receive_seq=1035304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5210 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=115659 bytes_read=358140 bytes_retransmit=0 bytes_invalid=0 send_seq=19252 receive_seq=19252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997832 sd_pos=1541253 heater_bed: target=60 temp=60.0 pwm=0.234 sysload=0.32 cputime=5793.687 memavail=3265792 print_time=18901.399 buffer_time=2.400 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
Stats 64867.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53756687 bytes_read=8629425 bytes_retransmit=9 bytes_invalid=0 send_seq=1035438 receive_seq=1035438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=984 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115665 bytes_read=358168 bytes_retransmit=0 bytes_invalid=0 send_seq=19253 receive_seq=19253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998744 adj=49997841 sd_pos=1542880 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.32 cputime=5793.745 memavail=3265048 print_time=18902.053 buffer_time=2.054 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64868.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53761924 bytes_read=8630107 bytes_retransmit=9 bytes_invalid=0 send_seq=1035531 receive_seq=1035531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=10862 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115671 bytes_read=358183 bytes_retransmit=0 bytes_invalid=0 send_seq=19254 receive_seq=19254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998741 adj=49997806 sd_pos=1547192 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.30 cputime=5793.926 memavail=3265052 print_time=18903.696 buffer_time=2.696 print_stall=0 extruder: target=210 temp=209.8 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64869.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53767111 bytes_read=8630798 bytes_retransmit=9 bytes_invalid=0 send_seq=1035626 receive_seq=1035626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=7979 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115677 bytes_read=358199 bytes_retransmit=0 bytes_invalid=0 send_seq=19255 receive_seq=19255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998738 adj=49997766 sd_pos=1548260 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.30 cputime=5794.047 memavail=3264296 print_time=18903.990 buffer_time=1.977 print_stall=0 extruder: target=210 temp=210.0 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64870.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53776220 bytes_read=8631821 bytes_retransmit=9 bytes_invalid=0 send_seq=1035784 receive_seq=1035784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=15117 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115683 bytes_read=358215 bytes_retransmit=0 bytes_invalid=0 send_seq=19256 receive_seq=19256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998737 adj=49997759 sd_pos=1551797 heater_bed: target=60 temp=60.0 pwm=0.029 sysload=0.30 cputime=5794.228 memavail=3264300 print_time=18905.773 buffer_time=2.723 print_stall=0 extruder: target=210 temp=210.1 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64871.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53785400 bytes_read=8632832 bytes_retransmit=9 bytes_invalid=0 send_seq=1035943 receive_seq=1035943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=12355 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115689 bytes_read=358231 bytes_retransmit=0 bytes_invalid=0 send_seq=19257 receive_seq=19257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998736 adj=49997763 sd_pos=1552846 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.30 cputime=5794.339 memavail=3264300 print_time=18906.338 buffer_time=2.287 print_stall=0 extruder: target=210 temp=210.3 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64872.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53796166 bytes_read=8633979 bytes_retransmit=9 bytes_invalid=0 send_seq=1036132 receive_seq=1036132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=13947 freq=400007565 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=115695 bytes_read=358260 bytes_retransmit=0 bytes_invalid=0 send_seq=19258 receive_seq=19258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998735 adj=49997767 sd_pos=1555930 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.30 cputime=5794.507 memavail=3264304 print_time=18907.683 buffer_time=2.632 print_stall=0 extruder: target=210 temp=210.4 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64873.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53806039 bytes_read=8635061 bytes_retransmit=9 bytes_invalid=0 send_seq=1036305 receive_seq=1036305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7520 freq=400007554 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=115701 bytes_read=358276 bytes_retransmit=0 bytes_invalid=0 send_seq=19259 receive_seq=19259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998738 adj=49997777 sd_pos=1556487 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.27 cputime=5794.615 memavail=3264304 print_time=18908.105 buffer_time=2.053 print_stall=0 extruder: target=210 temp=210.4 pwm=0.310
Stats 64874.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53814059 bytes_read=8635992 bytes_retransmit=9 bytes_invalid=0 send_seq=1036448 receive_seq=1036448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2762 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=115707 bytes_read=358292 bytes_retransmit=0 bytes_invalid=0 send_seq=19260 receive_seq=19260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998741 adj=49997834 sd_pos=1558071 heater_bed: target=60 temp=59.9 pwm=0.300 sysload=0.27 cputime=5794.730 memavail=3264304 print_time=18909.138 buffer_time=2.084 print_stall=0 extruder: target=210 temp=210.3 pwm=0.310
Stats 64875.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53819867 bytes_read=8636740 bytes_retransmit=9 bytes_invalid=0 send_seq=1036554 receive_seq=1036554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=0 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=115713 bytes_read=358308 bytes_retransmit=0 bytes_invalid=0 send_seq=19261 receive_seq=19261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998743 adj=49997784 sd_pos=1559626 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.27 cputime=5794.822 memavail=3264304 print_time=18910.146 buffer_time=2.092 print_stall=0 extruder: target=210 temp=210.3 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64876.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53825996 bytes_read=8637522 bytes_retransmit=9 bytes_invalid=0 send_seq=1036668 receive_seq=1036668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=2619 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=115719 bytes_read=358324 bytes_retransmit=0 bytes_invalid=0 send_seq=19262 receive_seq=19262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998747 adj=49997742 sd_pos=1562602 heater_bed: target=60 temp=60.0 pwm=0.324 sysload=0.27 cputime=5794.930 memavail=3264308 print_time=18911.677 buffer_time=2.622 print_stall=0 extruder: target=210 temp=210.1 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64877.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53828845 bytes_read=8638027 bytes_retransmit=9 bytes_invalid=0 send_seq=1036726 receive_seq=1036726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3993 freq=400007629 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115725 bytes_read=358353 bytes_retransmit=0 bytes_invalid=0 send_seq=19263 receive_seq=19263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997825 sd_pos=1563536 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.27 cputime=5795.014 memavail=3264456 print_time=18912.167 buffer_time=2.112 print_stall=0 extruder: target=210 temp=210.0 pwm=0.359
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64878.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53833636 bytes_read=8638684 bytes_retransmit=9 bytes_invalid=0 send_seq=1036817 receive_seq=1036817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=9161 freq=400007601 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115731 bytes_read=358369 bytes_retransmit=0 bytes_invalid=0 send_seq=19264 receive_seq=19264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998752 adj=49997911 sd_pos=1566298 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.25 cputime=5795.084 memavail=3264560 print_time=18913.374 buffer_time=2.318 print_stall=0 extruder: target=210 temp=209.9 pwm=0.359
Stats 64879.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53842335 bytes_read=8639682 bytes_retransmit=9 bytes_invalid=0 send_seq=1036971 receive_seq=1036971 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=5381 freq=400007621 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115743 bytes_read=358401 bytes_retransmit=0 bytes_invalid=0 send_seq=19266 receive_seq=19266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997909 sd_pos=1568469 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.25 cputime=5795.147 memavail=3264560 print_time=18914.080 buffer_time=2.024 print_stall=0 extruder: target=210 temp=209.6 pwm=0.436
Stats 64880.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53850900 bytes_read=8640679 bytes_retransmit=9 bytes_invalid=0 send_seq=1037124 receive_seq=1037124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3467 freq=400007607 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115749 bytes_read=358417 bytes_retransmit=0 bytes_invalid=0 send_seq=19267 receive_seq=19267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997834 sd_pos=1571934 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.25 cputime=5795.222 memavail=3264560 print_time=18915.235 buffer_time=2.178 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64881.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53857107 bytes_read=8641446 bytes_retransmit=9 bytes_invalid=0 send_seq=1037237 receive_seq=1037237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3420 freq=400007609 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115755 bytes_read=358433 bytes_retransmit=0 bytes_invalid=0 send_seq=19268 receive_seq=19268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997869 sd_pos=1574781 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.25 cputime=5795.304 memavail=3264560 print_time=18916.374 buffer_time=2.316 print_stall=0 extruder: target=210 temp=209.4 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64882.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53862889 bytes_read=8642198 bytes_retransmit=9 bytes_invalid=0 send_seq=1037344 receive_seq=1037344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=9892 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115761 bytes_read=358462 bytes_retransmit=0 bytes_invalid=0 send_seq=19269 receive_seq=19269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997831 sd_pos=1577787 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.25 cputime=5795.438 memavail=3264560 print_time=18917.534 buffer_time=2.474 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64883.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53868246 bytes_read=8642864 bytes_retransmit=9 bytes_invalid=0 send_seq=1037434 receive_seq=1037434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=16010 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115767 bytes_read=358478 bytes_retransmit=0 bytes_invalid=0 send_seq=19270 receive_seq=19270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998752 adj=49997875 sd_pos=1580673 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.23 cputime=5795.660 memavail=3264568 print_time=18918.875 buffer_time=2.815 print_stall=0 extruder: target=210 temp=209.7 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64884.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53877427 bytes_read=8643856 bytes_retransmit=9 bytes_invalid=0 send_seq=1037592 receive_seq=1037592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=16117 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115773 bytes_read=358494 bytes_retransmit=0 bytes_invalid=0 send_seq=19271 receive_seq=19271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997856 sd_pos=1582448 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.23 cputime=5795.778 memavail=3264568 print_time=18919.762 buffer_time=2.701 print_stall=0 extruder: target=210 temp=209.9 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64885.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53886582 bytes_read=8644899 bytes_retransmit=9 bytes_invalid=0 send_seq=1037754 receive_seq=1037754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=14439 freq=400007551 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115779 bytes_read=358510 bytes_retransmit=0 bytes_invalid=0 send_seq=19272 receive_seq=19272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998753 adj=49997858 sd_pos=1584434 heater_bed: target=60 temp=60.0 pwm=0.020 sysload=0.23 cputime=5795.889 memavail=3264568 print_time=18920.430 buffer_time=2.368 print_stall=0 extruder: target=210 temp=210.1 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64886.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53898054 bytes_read=8646108 bytes_retransmit=9 bytes_invalid=0 send_seq=1037953 receive_seq=1037953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16800 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115785 bytes_read=358526 bytes_retransmit=0 bytes_invalid=0 send_seq=19273 receive_seq=19273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997915 sd_pos=1588177 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.23 cputime=5796.070 memavail=3264568 print_time=18921.900 buffer_time=2.837 print_stall=0 extruder: target=210 temp=210.3 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64887.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53908332 bytes_read=8647208 bytes_retransmit=9 bytes_invalid=0 send_seq=1038133 receive_seq=1038133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=10170 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115791 bytes_read=358555 bytes_retransmit=0 bytes_invalid=0 send_seq=19274 receive_seq=19274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997819 sd_pos=1588699 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.23 cputime=5796.132 memavail=3265460 print_time=18922.329 buffer_time=2.267 print_stall=0 extruder: target=210 temp=210.3 pwm=0.324
Stats 64888.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53916934 bytes_read=8648185 bytes_retransmit=9 bytes_invalid=0 send_seq=1038285 receive_seq=1038285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=4346 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115797 bytes_read=358571 bytes_retransmit=0 bytes_invalid=0 send_seq=19275 receive_seq=19275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997814 sd_pos=1589885 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.21 cputime=5796.209 memavail=3269256 print_time=18923.116 buffer_time=2.053 print_stall=0 extruder: target=210 temp=210.3 pwm=0.324
Stats 64889.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=53924666 bytes_read=8649091 bytes_retransmit=9 bytes_invalid=0 send_seq=1038423 receive_seq=1038423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115803 bytes_read=358587 bytes_retransmit=0 bytes_invalid=0 send_seq=19276 receive_seq=19276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998755 adj=49997883 sd_pos=1591425 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.21 cputime=5796.300 memavail=3269168 print_time=18924.144 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.4 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64890.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53930822 bytes_read=8649889 bytes_retransmit=9 bytes_invalid=0 send_seq=1038539 receive_seq=1038539 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3648 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115809 bytes_read=358603 bytes_retransmit=0 bytes_invalid=0 send_seq=19277 receive_seq=19277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998757 adj=49997886 sd_pos=1594491 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.21 cputime=5796.414 memavail=3269032 print_time=18925.899 buffer_time=2.797 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64891.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53933674 bytes_read=8650356 bytes_retransmit=9 bytes_invalid=0 send_seq=1038589 receive_seq=1038589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=5177 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115815 bytes_read=358619 bytes_retransmit=0 bytes_invalid=0 send_seq=19278 receive_seq=19278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998754 adj=49997862 sd_pos=1595681 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.21 cputime=5796.459 memavail=3268024 print_time=18926.414 buffer_time=2.312 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64892.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53937646 bytes_read=8650957 bytes_retransmit=9 bytes_invalid=0 send_seq=1038666 receive_seq=1038666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=8072 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=115821 bytes_read=358648 bytes_retransmit=0 bytes_invalid=0 send_seq=19279 receive_seq=19279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998755 adj=49997814 sd_pos=1597573 heater_bed: target=60 temp=60.0 pwm=0.232 sysload=0.21 cputime=5796.508 memavail=3267524 print_time=18927.194 buffer_time=2.092 print_stall=0 extruder: target=210 temp=210.2 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64893.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53946398 bytes_read=8651949 bytes_retransmit=9 bytes_invalid=0 send_seq=1038824 receive_seq=1038824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=6369 freq=400007554 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=115827 bytes_read=358664 bytes_retransmit=0 bytes_invalid=0 send_seq=19280 receive_seq=19280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998753 adj=49997843 sd_pos=1599968 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.19 cputime=5796.578 memavail=3267524 print_time=18928.144 buffer_time=2.041 print_stall=0 extruder: target=210 temp=210.0 pwm=0.380
Stats 64894.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=53955071 bytes_read=8652936 bytes_retransmit=9 bytes_invalid=0 send_seq=1038978 receive_seq=1038978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=5430 freq=400007561 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=115833 bytes_read=358680 bytes_retransmit=0 bytes_invalid=0 send_seq=19281 receive_seq=19281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997839 sd_pos=1604193 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.19 cputime=5796.659 memavail=3267524 print_time=18929.515 buffer_time=2.411 print_stall=0 extruder: target=210 temp=209.9 pwm=0.380
Stats 64895.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53962427 bytes_read=8653833 bytes_retransmit=9 bytes_invalid=0 send_seq=1039111 receive_seq=1039111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1705 freq=400007569 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=115839 bytes_read=358696 bytes_retransmit=0 bytes_invalid=0 send_seq=19282 receive_seq=19282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998752 adj=49997804 sd_pos=1605993 heater_bed: target=60 temp=60.0 pwm=0.046 sysload=0.19 cputime=5796.717 memavail=3267524 print_time=18930.230 buffer_time=2.126 print_stall=0 extruder: target=210 temp=209.8 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64896.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53967865 bytes_read=8654540 bytes_retransmit=9 bytes_invalid=0 send_seq=1039212 receive_seq=1039212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7733 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=115845 bytes_read=358712 bytes_retransmit=0 bytes_invalid=0 send_seq=19283 receive_seq=19283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998752 adj=49997802 sd_pos=1609798 heater_bed: target=60 temp=60.0 pwm=0.026 sysload=0.19 cputime=5796.900 memavail=3267272 print_time=18931.549 buffer_time=2.444 print_stall=0 extruder: target=210 temp=209.7 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64897.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53973142 bytes_read=8655194 bytes_retransmit=9 bytes_invalid=0 send_seq=1039300 receive_seq=1039300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=14033 freq=400007540 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115851 bytes_read=358741 bytes_retransmit=0 bytes_invalid=0 send_seq=19284 receive_seq=19284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997821 sd_pos=1613049 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.19 cputime=5797.068 memavail=3266768 print_time=18932.846 buffer_time=2.741 print_stall=0 extruder: target=210 temp=209.7 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64898.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53981111 bytes_read=8656114 bytes_retransmit=9 bytes_invalid=0 send_seq=1039441 receive_seq=1039441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=17634 freq=400007525 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115857 bytes_read=358757 bytes_retransmit=0 bytes_invalid=0 send_seq=19285 receive_seq=19285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997820 sd_pos=1616096 heater_bed: target=60 temp=60.0 pwm=0.022 sysload=0.18 cputime=5797.190 memavail=3266776 print_time=18933.927 buffer_time=2.822 print_stall=0 extruder: target=210 temp=209.8 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64899.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=53989676 bytes_read=8657021 bytes_retransmit=9 bytes_invalid=0 send_seq=1039582 receive_seq=1039582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=12611 freq=400007516 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115863 bytes_read=358773 bytes_retransmit=0 bytes_invalid=0 send_seq=19286 receive_seq=19286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997836 sd_pos=1616748 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5797.295 memavail=3266776 print_time=18934.272 buffer_time=2.167 print_stall=0 extruder: target=210 temp=209.8 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64900.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54000527 bytes_read=8658199 bytes_retransmit=9 bytes_invalid=0 send_seq=1039771 receive_seq=1039771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=17814 freq=400007513 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115869 bytes_read=358789 bytes_retransmit=0 bytes_invalid=0 send_seq=19287 receive_seq=19287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998749 adj=49997838 sd_pos=1620395 heater_bed: target=60 temp=60.0 pwm=0.368 sysload=0.18 cputime=5797.469 memavail=3266776 print_time=18935.960 buffer_time=2.854 print_stall=0 extruder: target=210 temp=209.8 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64901.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54011912 bytes_read=8659355 bytes_retransmit=9 bytes_invalid=0 send_seq=1039959 receive_seq=1039959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=11376 freq=400007512 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115875 bytes_read=358805 bytes_retransmit=0 bytes_invalid=0 send_seq=19288 receive_seq=19288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998750 adj=49997829 sd_pos=1621415 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.18 cputime=5797.574 memavail=3266776 print_time=18936.375 buffer_time=2.268 print_stall=0 extruder: target=210 temp=209.8 pwm=0.375
Stats 64902.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54020961 bytes_read=8660352 bytes_retransmit=9 bytes_invalid=0 send_seq=1040118 receive_seq=1040118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=5940 freq=400007505 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115881 bytes_read=358834 bytes_retransmit=0 bytes_invalid=0 send_seq=19289 receive_seq=19289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998751 adj=49997837 sd_pos=1622619 heater_bed: target=60 temp=60.0 pwm=0.332 sysload=0.18 cputime=5797.679 memavail=3266776 print_time=18937.211 buffer_time=2.103 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
Stats 64903.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54030363 bytes_read=8661389 bytes_retransmit=9 bytes_invalid=0 send_seq=1040282 receive_seq=1040282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007510 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115887 bytes_read=358850 bytes_retransmit=0 bytes_invalid=0 send_seq=19290 receive_seq=19290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998757 adj=49997864 sd_pos=1624188 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.16 cputime=5797.788 memavail=3266776 print_time=18938.233 buffer_time=2.124 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64904.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54036155 bytes_read=8662145 bytes_retransmit=9 bytes_invalid=0 send_seq=1040390 receive_seq=1040390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007518 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115893 bytes_read=358866 bytes_retransmit=0 bytes_invalid=0 send_seq=19291 receive_seq=19291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998759 adj=49997928 sd_pos=1626714 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.16 cputime=5797.877 memavail=3266776 print_time=18939.616 buffer_time=2.507 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64905.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54039213 bytes_read=8662678 bytes_retransmit=9 bytes_invalid=0 send_seq=1040453 receive_seq=1040453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=3572 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115899 bytes_read=358882 bytes_retransmit=0 bytes_invalid=0 send_seq=19292 receive_seq=19292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998764 adj=49997895 sd_pos=1628535 heater_bed: target=60 temp=60.0 pwm=0.346 sysload=0.16 cputime=5797.965 memavail=3266776 print_time=18940.383 buffer_time=2.273 print_stall=0 extruder: target=210 temp=210.1 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64906.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54042117 bytes_read=8663190 bytes_retransmit=9 bytes_invalid=0 send_seq=1040512 receive_seq=1040512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=8087 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115905 bytes_read=358898 bytes_retransmit=0 bytes_invalid=0 send_seq=19293 receive_seq=19293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998765 adj=49997829 sd_pos=1630249 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.16 cputime=5798.066 memavail=3266536 print_time=18941.299 buffer_time=2.188 print_stall=0 extruder: target=210 temp=210.3 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64907.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54050202 bytes_read=8664076 bytes_retransmit=9 bytes_invalid=0 send_seq=1040646 receive_seq=1040646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=7166 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115911 bytes_read=358914 bytes_retransmit=0 bytes_invalid=0 send_seq=19294 receive_seq=19294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998766 adj=49997862 sd_pos=1632839 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.16 cputime=5798.142 memavail=3266060 print_time=18942.319 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.4 pwm=0.333
Stats 64908.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54058849 bytes_read=8665039 bytes_retransmit=9 bytes_invalid=0 send_seq=1040799 receive_seq=1040799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=4577 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115917 bytes_read=358943 bytes_retransmit=0 bytes_invalid=0 send_seq=19295 receive_seq=19295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998763 adj=49997860 sd_pos=1635755 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.15 cputime=5798.211 memavail=3266060 print_time=18943.247 buffer_time=2.135 print_stall=0 extruder: target=210 temp=210.5 pwm=0.333
Stats 64909.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54066359 bytes_read=8665916 bytes_retransmit=9 bytes_invalid=0 send_seq=1040931 receive_seq=1040931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1813 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115923 bytes_read=358959 bytes_retransmit=0 bytes_invalid=0 send_seq=19296 receive_seq=19296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998764 adj=49997793 sd_pos=1638509 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.15 cputime=5798.278 memavail=3266060 print_time=18944.128 buffer_time=2.015 print_stall=0 extruder: target=210 temp=210.5 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64910.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54072254 bytes_read=8666678 bytes_retransmit=9 bytes_invalid=0 send_seq=1041037 receive_seq=1041037 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3809 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115929 bytes_read=358975 bytes_retransmit=0 bytes_invalid=0 send_seq=19297 receive_seq=19297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998762 adj=49997808 sd_pos=1640688 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.15 cputime=5798.411 memavail=3266060 print_time=18945.283 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.5 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64911.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54077579 bytes_read=8667345 bytes_retransmit=9 bytes_invalid=0 send_seq=1041130 receive_seq=1041130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=6482 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115935 bytes_read=358991 bytes_retransmit=0 bytes_invalid=0 send_seq=19298 receive_seq=19298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998764 adj=49997802 sd_pos=1642528 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.15 cputime=5798.542 memavail=3266060 print_time=18946.120 buffer_time=2.006 print_stall=0 extruder: target=210 temp=210.5 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64912.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54084888 bytes_read=8668192 bytes_retransmit=9 bytes_invalid=0 send_seq=1041256 receive_seq=1041256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=11116 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=115941 bytes_read=359007 bytes_retransmit=0 bytes_invalid=0 send_seq=19299 receive_seq=19299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998763 adj=49997826 sd_pos=1645877 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.15 cputime=5798.765 memavail=3266060 print_time=18947.371 buffer_time=2.257 print_stall=0 extruder: target=210 temp=210.5 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64913.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54094598 bytes_read=8669263 bytes_retransmit=9 bytes_invalid=0 send_seq=1041427 receive_seq=1041427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=14884 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115947 bytes_read=359036 bytes_retransmit=0 bytes_invalid=0 send_seq=19300 receive_seq=19300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998764 adj=49997820 sd_pos=1648935 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.14 cputime=5798.944 memavail=3266060 print_time=18948.776 buffer_time=2.661 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64914.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54104524 bytes_read=8670325 bytes_retransmit=9 bytes_invalid=0 send_seq=1041599 receive_seq=1041599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=17900 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115953 bytes_read=359052 bytes_retransmit=0 bytes_invalid=0 send_seq=19301 receive_seq=19301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998762 adj=49997826 sd_pos=1652002 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.14 cputime=5799.059 memavail=3266060 print_time=18949.971 buffer_time=2.855 print_stall=0 extruder: target=210 temp=210.1 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64915.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54113527 bytes_read=8671358 bytes_retransmit=9 bytes_invalid=0 send_seq=1041759 receive_seq=1041759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=19904 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115959 bytes_read=359068 bytes_retransmit=0 bytes_invalid=0 send_seq=19302 receive_seq=19302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998760 adj=49997805 sd_pos=1653735 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.14 cputime=5799.147 memavail=3266060 print_time=18951.021 buffer_time=2.905 print_stall=0 extruder: target=210 temp=209.9 pwm=0.365
Stats 64916.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54123771 bytes_read=8672469 bytes_retransmit=9 bytes_invalid=0 send_seq=1041938 receive_seq=1041938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=12051 freq=400007583 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115965 bytes_read=359084 bytes_retransmit=0 bytes_invalid=0 send_seq=19303 receive_seq=19303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998759 adj=49997793 sd_pos=1654120 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.14 cputime=5799.200 memavail=3266060 print_time=18951.306 buffer_time=2.189 print_stall=0 extruder: target=210 temp=209.7 pwm=0.420
Stats 64917.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54135140 bytes_read=8673661 bytes_retransmit=9 bytes_invalid=0 send_seq=1042136 receive_seq=1042136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4259 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=115971 bytes_read=359100 bytes_retransmit=0 bytes_invalid=0 send_seq=19304 receive_seq=19304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998759 adj=49997787 sd_pos=1655645 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.14 cputime=5799.317 memavail=3265560 print_time=18952.339 buffer_time=2.222 print_stall=0 extruder: target=210 temp=209.5 pwm=0.420
Stats 64918.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54142591 bytes_read=8674548 bytes_retransmit=9 bytes_invalid=0 send_seq=1042270 receive_seq=1042270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115977 bytes_read=359129 bytes_retransmit=0 bytes_invalid=0 send_seq=19305 receive_seq=19305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998759 adj=49997784 sd_pos=1657169 heater_bed: target=60 temp=60.0 pwm=0.018 sysload=0.21 cputime=5799.416 memavail=3265572 print_time=18953.337 buffer_time=2.219 print_stall=0 extruder: target=210 temp=209.4 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64919.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54148302 bytes_read=8675288 bytes_retransmit=9 bytes_invalid=0 send_seq=1042376 receive_seq=1042376 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3609 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115983 bytes_read=359145 bytes_retransmit=0 bytes_invalid=0 send_seq=19306 receive_seq=19306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998761 adj=49997746 sd_pos=1659971 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.21 cputime=5799.522 memavail=3269232 print_time=18954.818 buffer_time=2.699 print_stall=0 extruder: target=210 temp=209.4 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64920.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54151253 bytes_read=8675801 bytes_retransmit=9 bytes_invalid=0 send_seq=1042435 receive_seq=1042435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3643 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115989 bytes_read=359161 bytes_retransmit=0 bytes_invalid=0 send_seq=19307 receive_seq=19307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998765 adj=49997780 sd_pos=1662955 heater_bed: target=60 temp=60.0 pwm=0.250 sysload=0.21 cputime=5799.607 memavail=3268224 print_time=18955.111 buffer_time=1.980 print_stall=0 extruder: target=210 temp=209.5 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64921.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54155980 bytes_read=8676467 bytes_retransmit=9 bytes_invalid=0 send_seq=1042522 receive_seq=1042522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=10471 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=115995 bytes_read=359177 bytes_retransmit=0 bytes_invalid=0 send_seq=19308 receive_seq=19308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998771 adj=49997832 sd_pos=1664307 heater_bed: target=60 temp=60.0 pwm=0.012 sysload=0.21 cputime=5799.742 memavail=3268224 print_time=18956.574 buffer_time=2.442 print_stall=0 extruder: target=210 temp=209.8 pwm=0.373
Stats 64922.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54165021 bytes_read=8677434 bytes_retransmit=9 bytes_invalid=0 send_seq=1042675 receive_seq=1042675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=6306 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116001 bytes_read=359193 bytes_retransmit=0 bytes_invalid=0 send_seq=19309 receive_seq=19309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998777 adj=49997879 sd_pos=1666329 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.21 cputime=5799.862 memavail=3268224 print_time=18957.300 buffer_time=2.168 print_stall=0 extruder: target=210 temp=209.9 pwm=0.318
Stats 64923.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54173323 bytes_read=8678376 bytes_retransmit=9 bytes_invalid=0 send_seq=1042823 receive_seq=1042823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=4628 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=116007 bytes_read=359222 bytes_retransmit=0 bytes_invalid=0 send_seq=19310 receive_seq=19310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998779 adj=49997924 sd_pos=1669987 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.19 cputime=5799.992 memavail=3268224 print_time=18958.458 buffer_time=2.326 print_stall=0 extruder: target=210 temp=210.2 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64924.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54180665 bytes_read=8679257 bytes_retransmit=9 bytes_invalid=0 send_seq=1042953 receive_seq=1042953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13261 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=116013 bytes_read=359238 bytes_retransmit=0 bytes_invalid=0 send_seq=19311 receive_seq=19311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998781 adj=49997939 sd_pos=1674624 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.19 cputime=5800.196 memavail=3268000 print_time=18960.410 buffer_time=3.200 print_stall=0 extruder: target=210 temp=210.4 pwm=0.318
Stats 64925.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54186074 bytes_read=8679960 bytes_retransmit=9 bytes_invalid=0 send_seq=1043050 receive_seq=1043050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=8476 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=116019 bytes_read=359254 bytes_retransmit=0 bytes_invalid=0 send_seq=19312 receive_seq=19312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998780 adj=49997901 sd_pos=1674624 heater_bed: target=60 temp=60.0 pwm=0.288 sysload=0.19 cputime=5800.235 memavail=3267748 print_time=18960.410 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.6 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64926.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54191744 bytes_read=8680702 bytes_retransmit=9 bytes_invalid=0 send_seq=1043155 receive_seq=1043155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12331 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=116025 bytes_read=359270 bytes_retransmit=0 bytes_invalid=0 send_seq=19313 receive_seq=19313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998778 adj=49997888 sd_pos=1676908 heater_bed: target=60 temp=60.0 pwm=0.038 sysload=0.19 cputime=5800.340 memavail=3267748 print_time=18961.383 buffer_time=2.172 print_stall=0 extruder: target=210 temp=210.6 pwm=0.289
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64927.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54203089 bytes_read=8681898 bytes_retransmit=9 bytes_invalid=0 send_seq=1043351 receive_seq=1043351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=8673 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=116031 bytes_read=359286 bytes_retransmit=0 bytes_invalid=0 send_seq=19314 receive_seq=19314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998776 adj=49997872 sd_pos=1678891 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.19 cputime=5800.530 memavail=3267004 print_time=18962.311 buffer_time=2.099 print_stall=0 extruder: target=210 temp=210.7 pwm=0.289
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64928.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54213292 bytes_read=8682980 bytes_retransmit=9 bytes_invalid=0 send_seq=1043527 receive_seq=1043527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=14099 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116037 bytes_read=359315 bytes_retransmit=0 bytes_invalid=0 send_seq=19315 receive_seq=19315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998779 adj=49997876 sd_pos=1682729 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.18 cputime=5800.705 memavail=3271584 print_time=18963.894 buffer_time=2.675 print_stall=0 extruder: target=210 temp=210.5 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64929.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54221487 bytes_read=8683924 bytes_retransmit=9 bytes_invalid=0 send_seq=1043674 receive_seq=1043673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=15048 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116043 bytes_read=359331 bytes_retransmit=0 bytes_invalid=0 send_seq=19316 receive_seq=19316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998780 adj=49997869 sd_pos=1684342 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.18 cputime=5800.856 memavail=3270596 print_time=18965.000 buffer_time=2.781 print_stall=0 extruder: target=210 temp=210.3 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64930.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54231638 bytes_read=8685053 bytes_retransmit=9 bytes_invalid=0 send_seq=1043853 receive_seq=1043853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=18285 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116049 bytes_read=359347 bytes_retransmit=0 bytes_invalid=0 send_seq=19317 receive_seq=19317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998781 adj=49997887 sd_pos=1686578 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.18 cputime=5801.022 memavail=3270596 print_time=18966.301 buffer_time=3.081 print_stall=0 extruder: target=210 temp=210.0 pwm=0.392
Stats 64931.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54239862 bytes_read=8685980 bytes_retransmit=9 bytes_invalid=0 send_seq=1043998 receive_seq=1043998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=10961 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116055 bytes_read=359363 bytes_retransmit=0 bytes_invalid=0 send_seq=19318 receive_seq=19318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998781 adj=49997888 sd_pos=1686578 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.18 cputime=5801.064 memavail=3270596 print_time=18966.301 buffer_time=2.080 print_stall=0 extruder: target=210 temp=209.8 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64932.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54249709 bytes_read=8687017 bytes_retransmit=9 bytes_invalid=0 send_seq=1044163 receive_seq=1044162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=6003 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116061 bytes_read=359379 bytes_retransmit=0 bytes_invalid=0 send_seq=19319 receive_seq=19319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998782 adj=49997868 sd_pos=1687821 heater_bed: target=60 temp=60.0 pwm=0.002 sysload=0.18 cputime=5801.130 memavail=3270596 print_time=18967.280 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.6 pwm=0.392
Stats 64933.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54259631 bytes_read=8688113 bytes_retransmit=9 bytes_invalid=0 send_seq=1044338 receive_seq=1044338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116067 bytes_read=359408 bytes_retransmit=0 bytes_invalid=0 send_seq=19320 receive_seq=19320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998780 adj=49997883 sd_pos=1689483 heater_bed: target=60 temp=60.0 pwm=0.241 sysload=0.16 cputime=5801.191 memavail=3270596 print_time=18968.372 buffer_time=2.150 print_stall=0 extruder: target=210 temp=209.4 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64934.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54263047 bytes_read=8688676 bytes_retransmit=9 bytes_invalid=0 send_seq=1044408 receive_seq=1044408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116079 bytes_read=359440 bytes_retransmit=0 bytes_invalid=0 send_seq=19322 receive_seq=19322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998776 adj=49997875 sd_pos=1691042 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.16 cputime=5801.228 memavail=3270356 print_time=18969.452 buffer_time=2.230 print_stall=0 extruder: target=210 temp=209.4 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64935.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54268476 bytes_read=8689409 bytes_retransmit=9 bytes_invalid=0 send_seq=1044508 receive_seq=1044508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2398 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116085 bytes_read=359456 bytes_retransmit=0 bytes_invalid=0 send_seq=19323 receive_seq=19323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997821 sd_pos=1693346 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.16 cputime=5801.288 memavail=3270356 print_time=18970.359 buffer_time=2.136 print_stall=0 extruder: target=210 temp=209.4 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64936.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54271345 bytes_read=8689925 bytes_retransmit=9 bytes_invalid=0 send_seq=1044568 receive_seq=1044568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=9908 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116091 bytes_read=359472 bytes_retransmit=0 bytes_invalid=0 send_seq=19324 receive_seq=19324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998786 adj=49997953 sd_pos=1696187 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.16 cputime=5801.407 memavail=3270356 print_time=18971.632 buffer_time=2.409 print_stall=0 extruder: target=210 temp=209.6 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64937.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54279412 bytes_read=8690852 bytes_retransmit=9 bytes_invalid=0 send_seq=1044713 receive_seq=1044713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=8848 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116097 bytes_read=359488 bytes_retransmit=0 bytes_invalid=0 send_seq=19325 receive_seq=19325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997906 sd_pos=1698822 heater_bed: target=60 temp=60.0 pwm=0.001 sysload=0.16 cputime=5801.532 memavail=3268884 print_time=18972.520 buffer_time=2.297 print_stall=0 extruder: target=210 temp=209.7 pwm=0.372
Stats 64938.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54288502 bytes_read=8691874 bytes_retransmit=9 bytes_invalid=0 send_seq=1044874 receive_seq=1044874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3664 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116103 bytes_read=359517 bytes_retransmit=0 bytes_invalid=0 send_seq=19326 receive_seq=19326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997928 sd_pos=1700523 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.15 cputime=5801.651 memavail=3268884 print_time=18973.249 buffer_time=2.025 print_stall=0 extruder: target=210 temp=209.9 pwm=0.372
Stats 64939.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54296321 bytes_read=8692760 bytes_retransmit=9 bytes_invalid=0 send_seq=1045008 receive_seq=1045008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2160 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116109 bytes_read=359533 bytes_retransmit=0 bytes_invalid=0 send_seq=19327 receive_seq=19327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998794 adj=49997988 sd_pos=1703659 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.15 cputime=5801.780 memavail=3268884 print_time=18974.288 buffer_time=2.064 print_stall=0 extruder: target=210 temp=210.1 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64940.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54301661 bytes_read=8693447 bytes_retransmit=9 bytes_invalid=0 send_seq=1045103 receive_seq=1045103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3866 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116115 bytes_read=359549 bytes_retransmit=0 bytes_invalid=0 send_seq=19328 receive_seq=19328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998793 adj=49998003 sd_pos=1705903 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.15 cputime=5801.963 memavail=3268884 print_time=18975.396 buffer_time=2.171 print_stall=0 extruder: target=210 temp=210.3 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64941.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54307821 bytes_read=8694248 bytes_retransmit=9 bytes_invalid=0 send_seq=1045217 receive_seq=1045217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=7777 freq=400007574 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116121 bytes_read=359565 bytes_retransmit=0 bytes_invalid=0 send_seq=19329 receive_seq=19329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997943 sd_pos=1707807 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.15 cputime=5802.117 memavail=3268644 print_time=18976.525 buffer_time=2.262 print_stall=0 extruder: target=210 temp=210.5 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64942.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54314587 bytes_read=8695025 bytes_retransmit=9 bytes_invalid=0 send_seq=1045332 receive_seq=1045332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=10296 freq=400007559 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116127 bytes_read=359581 bytes_retransmit=0 bytes_invalid=0 send_seq=19330 receive_seq=19330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49997914 sd_pos=1710435 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.14 cputime=5802.224 memavail=3268644 print_time=18977.507 buffer_time=2.243 print_stall=0 extruder: target=210 temp=210.5 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64943.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54324371 bytes_read=8696057 bytes_retransmit=9 bytes_invalid=0 send_seq=1045495 receive_seq=1045495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=10644 freq=400007547 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116133 bytes_read=359610 bytes_retransmit=0 bytes_invalid=0 send_seq=19331 receive_seq=19331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998786 adj=49997893 sd_pos=1712636 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.14 cputime=5802.344 memavail=3268644 print_time=18978.518 buffer_time=2.252 print_stall=0 extruder: target=210 temp=210.5 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64944.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54333051 bytes_read=8696993 bytes_retransmit=9 bytes_invalid=0 send_seq=1045639 receive_seq=1045639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=9445 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116139 bytes_read=359626 bytes_retransmit=0 bytes_invalid=0 send_seq=19332 receive_seq=19332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998784 adj=49997877 sd_pos=1713797 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.14 cputime=5802.505 memavail=3268644 print_time=18979.381 buffer_time=2.115 print_stall=0 extruder: target=210 temp=210.3 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64945.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54342883 bytes_read=8698071 bytes_retransmit=9 bytes_invalid=0 send_seq=1045811 receive_seq=1045811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=12780 freq=400007582 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116145 bytes_read=359642 bytes_retransmit=0 bytes_invalid=0 send_seq=19333 receive_seq=19333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997804 sd_pos=1716795 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.14 cputime=5802.636 memavail=3268652 print_time=18980.731 buffer_time=2.464 print_stall=0 extruder: target=210 temp=210.1 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64946.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54352402 bytes_read=8699118 bytes_retransmit=9 bytes_invalid=0 send_seq=1045977 receive_seq=1045977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=12076 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116151 bytes_read=359658 bytes_retransmit=0 bytes_invalid=0 send_seq=19334 receive_seq=19334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998800 adj=49997894 sd_pos=1718291 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.14 cputime=5802.762 memavail=3268652 print_time=18981.526 buffer_time=2.259 print_stall=0 extruder: target=210 temp=209.9 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64947.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54362174 bytes_read=8700194 bytes_retransmit=9 bytes_invalid=0 send_seq=1046149 receive_seq=1046149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=10814 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116157 bytes_read=359674 bytes_retransmit=0 bytes_invalid=0 send_seq=19335 receive_seq=19335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998797 adj=49997997 sd_pos=1719928 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.12 cputime=5802.902 memavail=3267172 print_time=18982.349 buffer_time=2.080 print_stall=0 extruder: target=210 temp=209.5 pwm=0.431
Stats 64948.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54372344 bytes_read=8701286 bytes_retransmit=9 bytes_invalid=0 send_seq=1046327 receive_seq=1046327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=4845 freq=400007560 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116163 bytes_read=359703 bytes_retransmit=0 bytes_invalid=0 send_seq=19336 receive_seq=19336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998798 adj=49997960 sd_pos=1721491 heater_bed: target=60 temp=60.0 pwm=0.035 sysload=0.12 cputime=5802.967 memavail=3266932 print_time=18983.433 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.4 pwm=0.431
Stats 64949.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54380651 bytes_read=8702238 bytes_retransmit=9 bytes_invalid=0 send_seq=1046474 receive_seq=1046474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116169 bytes_read=359718 bytes_retransmit=0 bytes_invalid=0 send_seq=19337 receive_seq=19337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998796 adj=49997967 sd_pos=1723077 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.12 cputime=5803.021 memavail=3266932 print_time=18984.498 buffer_time=2.228 print_stall=0 extruder: target=210 temp=209.3 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64950.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54386365 bytes_read=8703000 bytes_retransmit=9 bytes_invalid=0 send_seq=1046580 receive_seq=1046580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=807 freq=400007556 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116175 bytes_read=359733 bytes_retransmit=0 bytes_invalid=0 send_seq=19338 receive_seq=19338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998793 adj=49997926 sd_pos=1725338 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.12 cputime=5803.069 memavail=3266932 print_time=18985.730 buffer_time=2.459 print_stall=0 extruder: target=210 temp=209.4 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64951.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54389301 bytes_read=8703497 bytes_retransmit=9 bytes_invalid=0 send_seq=1046640 receive_seq=1046640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3869 freq=400007557 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116181 bytes_read=359748 bytes_retransmit=0 bytes_invalid=0 send_seq=19339 receive_seq=19339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997859 sd_pos=1727051 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.12 cputime=5803.112 memavail=3266936 print_time=18986.412 buffer_time=2.141 print_stall=0 extruder: target=210 temp=209.6 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64952.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54393206 bytes_read=8704094 bytes_retransmit=9 bytes_invalid=0 send_seq=1046716 receive_seq=1046716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7662 freq=400007556 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=116187 bytes_read=359763 bytes_retransmit=0 bytes_invalid=0 send_seq=19340 receive_seq=19340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997825 sd_pos=1729106 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.11 cputime=5803.185 memavail=3266936 print_time=18987.363 buffer_time=2.091 print_stall=0 extruder: target=210 temp=209.8 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64953.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54401900 bytes_read=8705075 bytes_retransmit=9 bytes_invalid=0 send_seq=1046869 receive_seq=1046869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7435 freq=400007561 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116193 bytes_read=359791 bytes_retransmit=0 bytes_invalid=0 send_seq=19341 receive_seq=19341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997830 sd_pos=1732238 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.11 cputime=5803.348 memavail=3266940 print_time=18988.619 buffer_time=2.346 print_stall=0 extruder: target=210 temp=210.1 pwm=0.321
Stats 64954.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54410274 bytes_read=8706012 bytes_retransmit=9 bytes_invalid=0 send_seq=1047016 receive_seq=1047016 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4404 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116199 bytes_read=359806 bytes_retransmit=0 bytes_invalid=0 send_seq=19342 receive_seq=19342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998798 adj=49997846 sd_pos=1734450 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.11 cputime=5803.461 memavail=3266700 print_time=18989.357 buffer_time=2.083 print_stall=0 extruder: target=210 temp=210.3 pwm=0.321
Stats 64955.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54417210 bytes_read=8706870 bytes_retransmit=9 bytes_invalid=0 send_seq=1047141 receive_seq=1047141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=4042 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116205 bytes_read=359822 bytes_retransmit=0 bytes_invalid=0 send_seq=19343 receive_seq=19343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998805 adj=49997887 sd_pos=1737873 heater_bed: target=60 temp=60.0 pwm=0.046 sysload=0.11 cputime=5803.602 memavail=3266700 print_time=18990.569 buffer_time=2.294 print_stall=0 extruder: target=210 temp=210.4 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64956.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54423924 bytes_read=8707701 bytes_retransmit=9 bytes_invalid=0 send_seq=1047264 receive_seq=1047264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=3750 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116211 bytes_read=359838 bytes_retransmit=0 bytes_invalid=0 send_seq=19344 receive_seq=19344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998806 adj=49997949 sd_pos=1739631 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.11 cputime=5803.797 memavail=3266700 print_time=18991.445 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.6 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64957.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54429136 bytes_read=8708388 bytes_retransmit=9 bytes_invalid=0 send_seq=1047361 receive_seq=1047361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=8378 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116217 bytes_read=359854 bytes_retransmit=0 bytes_invalid=0 send_seq=19345 receive_seq=19345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998803 adj=49997958 sd_pos=1741943 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.10 cputime=5803.958 memavail=3265444 print_time=18992.639 buffer_time=2.364 print_stall=0 extruder: target=210 temp=210.6 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64958.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54436518 bytes_read=8709265 bytes_retransmit=9 bytes_invalid=0 send_seq=1047493 receive_seq=1047493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=8881 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=116223 bytes_read=359883 bytes_retransmit=0 bytes_invalid=0 send_seq=19346 receive_seq=19346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998801 adj=49997878 sd_pos=1743915 heater_bed: target=60 temp=60.0 pwm=0.007 sysload=0.10 cputime=5804.058 memavail=3265444 print_time=18993.446 buffer_time=2.171 print_stall=0 extruder: target=210 temp=210.5 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64959.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54444589 bytes_read=8710156 bytes_retransmit=9 bytes_invalid=0 send_seq=1047628 receive_seq=1047628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=10503 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=116229 bytes_read=359899 bytes_retransmit=0 bytes_invalid=0 send_seq=19347 receive_seq=19347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998798 adj=49997857 sd_pos=1745890 heater_bed: target=60 temp=60.0 pwm=0.314 sysload=0.10 cputime=5804.240 memavail=3264688 print_time=18994.603 buffer_time=2.328 print_stall=0 extruder: target=210 temp=210.4 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64960.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54454162 bytes_read=8711194 bytes_retransmit=9 bytes_invalid=0 send_seq=1047792 receive_seq=1047792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11423 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=116235 bytes_read=359915 bytes_retransmit=0 bytes_invalid=0 send_seq=19348 receive_seq=19348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998796 adj=49997825 sd_pos=1748049 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.10 cputime=5804.360 memavail=3264692 print_time=18995.663 buffer_time=2.386 print_stall=0 extruder: target=210 temp=210.1 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64961.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54462646 bytes_read=8712130 bytes_retransmit=9 bytes_invalid=0 send_seq=1047936 receive_seq=1047936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=12488 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=116241 bytes_read=359931 bytes_retransmit=0 bytes_invalid=0 send_seq=19349 receive_seq=19349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998796 adj=49997794 sd_pos=1749770 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.10 cputime=5804.439 memavail=3264692 print_time=18996.524 buffer_time=2.245 print_stall=0 extruder: target=210 temp=209.9 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64962.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54472227 bytes_read=8713157 bytes_retransmit=9 bytes_invalid=0 send_seq=1048099 receive_seq=1048099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=16282 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=116247 bytes_read=359947 bytes_retransmit=0 bytes_invalid=0 send_seq=19350 receive_seq=19350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998799 adj=49997813 sd_pos=1752210 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.10 cputime=5804.604 memavail=3264696 print_time=18997.839 buffer_time=2.559 print_stall=0 extruder: target=210 temp=209.5 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64963.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54483197 bytes_read=8714309 bytes_retransmit=9 bytes_invalid=0 send_seq=1048289 receive_seq=1048289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=9190 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116253 bytes_read=359976 bytes_retransmit=0 bytes_invalid=0 send_seq=19351 receive_seq=19351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998804 adj=49997839 sd_pos=1752706 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.10 cputime=5804.720 memavail=3264696 print_time=18998.297 buffer_time=2.016 print_stall=0 extruder: target=210 temp=209.3 pwm=0.469
Stats 64964.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54493280 bytes_read=8715401 bytes_retransmit=9 bytes_invalid=0 send_seq=1048464 receive_seq=1048464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=2622 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116259 bytes_read=359992 bytes_retransmit=0 bytes_invalid=0 send_seq=19352 receive_seq=19352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998806 adj=49997828 sd_pos=1754270 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.10 cputime=5804.838 memavail=3264696 print_time=18999.336 buffer_time=2.055 print_stall=0 extruder: target=210 temp=209.2 pwm=0.469
Stats 64965.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54499047 bytes_read=8716158 bytes_retransmit=9 bytes_invalid=0 send_seq=1048569 receive_seq=1048569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116265 bytes_read=360008 bytes_retransmit=0 bytes_invalid=0 send_seq=19353 receive_seq=19353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998817 adj=49997851 sd_pos=1755780 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.10 cputime=5804.926 memavail=3264456 print_time=19000.356 buffer_time=2.074 print_stall=0 extruder: target=210 temp=209.1 pwm=0.469
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64966.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54505221 bytes_read=8716890 bytes_retransmit=9 bytes_invalid=0 send_seq=1048685 receive_seq=1048675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2689 freq=400007810 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116271 bytes_read=360024 bytes_retransmit=0 bytes_invalid=0 send_seq=19354 receive_seq=19354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998814 adj=49997979 sd_pos=1758262 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.10 cputime=5805.029 memavail=3264712 print_time=19001.803 buffer_time=2.506 print_stall=0 extruder: target=210 temp=209.3 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64967.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54508112 bytes_read=8717452 bytes_retransmit=9 bytes_invalid=0 send_seq=1048744 receive_seq=1048744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=7337 freq=400007936 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116277 bytes_read=360040 bytes_retransmit=0 bytes_invalid=0 send_seq=19355 receive_seq=19355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998813 adj=49997704 sd_pos=1759870 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.09 cputime=5805.128 memavail=3264208 print_time=19002.748 buffer_time=2.452 print_stall=0 extruder: target=210 temp=209.6 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64968.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54513855 bytes_read=8718203 bytes_retransmit=9 bytes_invalid=0 send_seq=1048851 receive_seq=1048851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=6588 freq=400008049 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=116283 bytes_read=360069 bytes_retransmit=0 bytes_invalid=0 send_seq=19356 receive_seq=19356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998812 adj=49997535 sd_pos=1761383 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.09 cputime=5805.232 memavail=3264208 print_time=19003.528 buffer_time=2.231 print_stall=0 extruder: target=210 temp=210.1 pwm=0.291
Stats 64969.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54521949 bytes_read=8719130 bytes_retransmit=9 bytes_invalid=0 send_seq=1048996 receive_seq=1048996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=4089 freq=400008029 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=116289 bytes_read=360085 bytes_retransmit=0 bytes_invalid=0 send_seq=19357 receive_seq=19357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998812 adj=49997361 sd_pos=1764378 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.09 cputime=5805.343 memavail=3264208 print_time=19004.324 buffer_time=2.026 print_stall=0 extruder: target=210 temp=210.4 pwm=0.291
Stats 64970.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54529209 bytes_read=8720018 bytes_retransmit=9 bytes_invalid=0 send_seq=1049127 receive_seq=1049127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=5018 freq=400008001 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=116295 bytes_read=360101 bytes_retransmit=0 bytes_invalid=0 send_seq=19358 receive_seq=19358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998813 adj=49997423 sd_pos=1768702 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.09 cputime=5805.490 memavail=3264208 print_time=19005.820 buffer_time=2.522 print_stall=0 extruder: target=210 temp=210.7 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64971.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54535600 bytes_read=8720824 bytes_retransmit=9 bytes_invalid=0 send_seq=1049245 receive_seq=1049245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2435 freq=400007973 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=116301 bytes_read=360117 bytes_retransmit=0 bytes_invalid=0 send_seq=19359 receive_seq=19359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998814 adj=49997638 sd_pos=1769678 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.09 cputime=5805.613 memavail=3264208 print_time=19006.340 buffer_time=2.041 print_stall=0 extruder: target=210 temp=210.9 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64972.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54540871 bytes_read=8721508 bytes_retransmit=9 bytes_invalid=0 send_seq=1049342 receive_seq=1049342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4294 freq=400007953 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=116307 bytes_read=360133 bytes_retransmit=0 bytes_invalid=0 send_seq=19360 receive_seq=19360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998813 adj=49997695 sd_pos=1771459 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.24 cputime=5805.918 memavail=3264208 print_time=19007.398 buffer_time=2.097 print_stall=0 extruder: target=210 temp=210.9 pwm=0.277
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64973.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54547465 bytes_read=8722327 bytes_retransmit=9 bytes_invalid=0 send_seq=1049463 receive_seq=1049463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=8327 freq=400008000 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=116313 bytes_read=360162 bytes_retransmit=0 bytes_invalid=0 send_seq=19361 receive_seq=19361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998808 adj=49997719 sd_pos=1774130 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.24 cputime=5806.096 memavail=3264208 print_time=19008.805 buffer_time=2.503 print_stall=0 extruder: target=210 temp=210.8 pwm=0.277
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64974.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54554495 bytes_read=8723183 bytes_retransmit=9 bytes_invalid=0 send_seq=1049591 receive_seq=1049591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=6907 freq=400008040 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=116319 bytes_read=360178 bytes_retransmit=0 bytes_invalid=0 send_seq=19362 receive_seq=19362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998805 adj=49997647 sd_pos=1775054 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.24 cputime=5806.149 memavail=3264208 print_time=19009.531 buffer_time=2.229 print_stall=0 extruder: target=210 temp=210.6 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64975.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54562060 bytes_read=8724081 bytes_retransmit=9 bytes_invalid=0 send_seq=1049727 receive_seq=1049727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=7187 freq=400007995 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=116325 bytes_read=360194 bytes_retransmit=0 bytes_invalid=0 send_seq=19363 receive_seq=19363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998801 adj=49997544 sd_pos=1777008 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.24 cputime=5806.212 memavail=3264208 print_time=19010.512 buffer_time=2.209 print_stall=0 extruder: target=210 temp=210.3 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64976.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54570431 bytes_read=8725043 bytes_retransmit=9 bytes_invalid=0 send_seq=1049876 receive_seq=1049876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=11556 freq=400007965 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=116331 bytes_read=360210 bytes_retransmit=0 bytes_invalid=0 send_seq=19364 receive_seq=19364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998799 adj=49997614 sd_pos=1779904 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.24 cputime=5806.288 memavail=3264220 print_time=19012.018 buffer_time=2.714 print_stall=0 extruder: target=210 temp=209.9 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64977.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54578523 bytes_read=8725979 bytes_retransmit=9 bytes_invalid=0 send_seq=1050020 receive_seq=1050020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=15349 freq=400008080 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=116337 bytes_read=360226 bytes_retransmit=0 bytes_invalid=0 send_seq=19365 receive_seq=19365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998798 adj=49997703 sd_pos=1782336 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.22 cputime=5806.426 memavail=3265232 print_time=19013.334 buffer_time=3.030 print_stall=0 extruder: target=210 temp=209.4 pwm=0.434
Stats 64978.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54586665 bytes_read=8726906 bytes_retransmit=9 bytes_invalid=0 send_seq=1050165 receive_seq=1050165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=8060 freq=400008034 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116343 bytes_read=360255 bytes_retransmit=0 bytes_invalid=0 send_seq=19366 receive_seq=19366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998795 adj=49997591 sd_pos=1782336 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.22 cputime=5806.465 memavail=3265232 print_time=19013.334 buffer_time=2.029 print_stall=0 extruder: target=210 temp=209.1 pwm=0.484
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64979.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54595315 bytes_read=8727883 bytes_retransmit=9 bytes_invalid=0 send_seq=1050317 receive_seq=1050317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=8401 freq=400007988 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116349 bytes_read=360271 bytes_retransmit=0 bytes_invalid=0 send_seq=19367 receive_seq=19367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998793 adj=49997619 sd_pos=1783871 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.22 cputime=5806.524 memavail=3265232 print_time=19014.553 buffer_time=2.247 print_stall=0 extruder: target=210 temp=209.0 pwm=0.484
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64980.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54605037 bytes_read=8728950 bytes_retransmit=9 bytes_invalid=0 send_seq=1050484 receive_seq=1050484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=7661 freq=400008106 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116355 bytes_read=360287 bytes_retransmit=0 bytes_invalid=0 send_seq=19368 receive_seq=19368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997656 sd_pos=1785385 heater_bed: target=60 temp=60.0 pwm=0.239 sysload=0.22 cputime=5806.584 memavail=3265232 print_time=19015.622 buffer_time=2.316 print_stall=0 extruder: target=210 temp=209.0 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64981.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54612378 bytes_read=8729807 bytes_retransmit=9 bytes_invalid=0 send_seq=1050615 receive_seq=1050615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=7577 freq=400008063 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116361 bytes_read=360303 bytes_retransmit=0 bytes_invalid=0 send_seq=19369 receive_seq=19369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997477 sd_pos=1787521 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.22 cputime=5806.649 memavail=3264992 print_time=19016.600 buffer_time=2.293 print_stall=0 extruder: target=210 temp=209.3 pwm=0.372
Stats 64982.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54621180 bytes_read=8730809 bytes_retransmit=9 bytes_invalid=0 send_seq=1050772 receive_seq=1050772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1656 freq=400008014 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116367 bytes_read=360319 bytes_retransmit=0 bytes_invalid=0 send_seq=19370 receive_seq=19370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998789 adj=49997580 sd_pos=1788730 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.20 cputime=5806.719 memavail=3265000 print_time=19017.385 buffer_time=2.077 print_stall=0 extruder: target=210 temp=209.6 pwm=0.372
Stats 64983.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54625961 bytes_read=8731475 bytes_retransmit=9 bytes_invalid=0 send_seq=1050863 receive_seq=1050863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007979 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116373 bytes_read=360348 bytes_retransmit=0 bytes_invalid=0 send_seq=19371 receive_seq=19371 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997653 sd_pos=1790331 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.20 cputime=5806.802 memavail=3265000 print_time=19018.456 buffer_time=2.148 print_stall=0 extruder: target=210 temp=210.2 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64984.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54631866 bytes_read=8732222 bytes_retransmit=9 bytes_invalid=0 send_seq=1050972 receive_seq=1050972 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=5500 freq=400007970 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116379 bytes_read=360364 bytes_retransmit=0 bytes_invalid=0 send_seq=19372 receive_seq=19372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998796 adj=49997778 sd_pos=1793806 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.20 cputime=5806.938 memavail=3265000 print_time=19020.286 buffer_time=2.966 print_stall=0 extruder: target=210 temp=210.6 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64985.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54634811 bytes_read=8732760 bytes_retransmit=9 bytes_invalid=0 send_seq=1051033 receive_seq=1051033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=10508 freq=400007926 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116385 bytes_read=360380 bytes_retransmit=0 bytes_invalid=0 send_seq=19373 receive_seq=19373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998796 adj=49997826 sd_pos=1795984 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.20 cputime=5806.992 memavail=3264748 print_time=19021.237 buffer_time=2.916 print_stall=0 extruder: target=210 temp=211.0 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 64987.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54638940 bytes_read=8733351 bytes_retransmit=9 bytes_invalid=0 send_seq=1051108 receive_seq=1051108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=9183 freq=400007886 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116391 bytes_read=360396 bytes_retransmit=0 bytes_invalid=0 send_seq=19374 receive_seq=19374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998794 adj=49997879 sd_pos=1796553 heater_bed: target=60 temp=60.0 pwm=0.040 sysload=0.20 cputime=5807.033 memavail=3264748 print_time=19021.493 buffer_time=2.172 print_stall=0 extruder: target=210 temp=211.3 pwm=0.186
Stats 64988.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54647879 bytes_read=8734348 bytes_retransmit=9 bytes_invalid=0 send_seq=1051267 receive_seq=1051267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=7785 freq=400007940 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116397 bytes_read=360412 bytes_retransmit=0 bytes_invalid=0 send_seq=19375 receive_seq=19375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998794 adj=49997910 sd_pos=1799658 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.19 cputime=5807.107 memavail=3264500 print_time=19022.648 buffer_time=2.326 print_stall=0 extruder: target=210 temp=211.4 pwm=0.186
Stats 64989.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54656940 bytes_read=8735365 bytes_retransmit=9 bytes_invalid=0 send_seq=1051427 receive_seq=1051427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=4728 freq=400007915 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116403 bytes_read=360441 bytes_retransmit=0 bytes_invalid=0 send_seq=19376 receive_seq=19376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997833 sd_pos=1802980 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.19 cputime=5807.184 memavail=3264500 print_time=19023.725 buffer_time=2.402 print_stall=0 extruder: target=210 temp=211.2 pwm=0.258
Stats 64990.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54663730 bytes_read=8736196 bytes_retransmit=9 bytes_invalid=0 send_seq=1051550 receive_seq=1051550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2939 freq=400007888 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116409 bytes_read=360457 bytes_retransmit=0 bytes_invalid=0 send_seq=19377 receive_seq=19377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997841 sd_pos=1805399 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.19 cputime=5807.242 memavail=3264500 print_time=19024.422 buffer_time=2.098 print_stall=0 extruder: target=210 temp=210.8 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64991.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54669107 bytes_read=8736919 bytes_retransmit=9 bytes_invalid=0 send_seq=1051651 receive_seq=1051651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=3132 freq=400007854 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116415 bytes_read=360473 bytes_retransmit=0 bytes_invalid=0 send_seq=19378 receive_seq=19378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998795 adj=49997859 sd_pos=1806243 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.19 cputime=5807.411 memavail=3264500 print_time=19025.327 buffer_time=2.002 print_stall=0 extruder: target=210 temp=210.4 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64992.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54675460 bytes_read=8737681 bytes_retransmit=9 bytes_invalid=0 send_seq=1051760 receive_seq=1051760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=5838 freq=400007831 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116421 bytes_read=360489 bytes_retransmit=0 bytes_invalid=0 send_seq=19379 receive_seq=19379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998793 adj=49997974 sd_pos=1809931 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.19 cputime=5807.755 memavail=3264500 print_time=19026.808 buffer_time=2.483 print_stall=0 extruder: target=210 temp=210.0 pwm=0.413
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64993.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54681702 bytes_read=8738457 bytes_retransmit=9 bytes_invalid=0 send_seq=1051872 receive_seq=1051872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14574 freq=400007833 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116427 bytes_read=360505 bytes_retransmit=0 bytes_invalid=0 send_seq=19380 receive_seq=19380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997917 sd_pos=1813213 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.17 cputime=5807.833 memavail=3264500 print_time=19028.353 buffer_time=3.026 print_stall=0 extruder: target=210 temp=209.4 pwm=0.469
Stats 64994.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54687746 bytes_read=8739209 bytes_retransmit=9 bytes_invalid=0 send_seq=1051982 receive_seq=1051982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=9202 freq=400007809 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116433 bytes_read=360534 bytes_retransmit=0 bytes_invalid=0 send_seq=19381 receive_seq=19381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49997850 sd_pos=1813213 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.17 cputime=5807.870 memavail=3264500 print_time=19028.353 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.1 pwm=0.469
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 64995.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54696776 bytes_read=8740231 bytes_retransmit=9 bytes_invalid=0 send_seq=1052142 receive_seq=1052141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10805 freq=400007803 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116439 bytes_read=360550 bytes_retransmit=0 bytes_invalid=0 send_seq=19382 receive_seq=19382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49997858 sd_pos=1815693 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.17 cputime=5807.942 memavail=3264508 print_time=19029.600 buffer_time=2.273 print_stall=0 extruder: target=210 temp=208.8 pwm=0.469
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64996.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54707335 bytes_read=8741384 bytes_retransmit=9 bytes_invalid=0 send_seq=1052328 receive_seq=1052328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=22280 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116445 bytes_read=360566 bytes_retransmit=0 bytes_invalid=0 send_seq=19383 receive_seq=19383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49997860 sd_pos=1821293 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.17 cputime=5808.103 memavail=3269376 print_time=19031.831 buffer_time=3.503 print_stall=0 extruder: target=210 temp=208.6 pwm=0.469
Stats 64997.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54715926 bytes_read=8742346 bytes_retransmit=9 bytes_invalid=0 send_seq=1052480 receive_seq=1052480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=14612 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116451 bytes_read=360582 bytes_retransmit=0 bytes_invalid=0 send_seq=19384 receive_seq=19384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997870 sd_pos=1821293 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.17 cputime=5808.145 memavail=3269400 print_time=19031.831 buffer_time=2.503 print_stall=0 extruder: target=210 temp=208.6 pwm=0.469
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 64998.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54726415 bytes_read=8743497 bytes_retransmit=9 bytes_invalid=0 send_seq=1052664 receive_seq=1052664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=18992 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116457 bytes_read=360598 bytes_retransmit=0 bytes_invalid=0 send_seq=19385 receive_seq=19385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997886 sd_pos=1824675 heater_bed: target=60 temp=60.0 pwm=0.229 sysload=0.16 cputime=5808.236 memavail=3267892 print_time=19033.374 buffer_time=3.044 print_stall=0 extruder: target=210 temp=208.9 pwm=0.402
Stats 64999.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54736097 bytes_read=8744525 bytes_retransmit=9 bytes_invalid=0 send_seq=1052827 receive_seq=1052827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=10254 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116469 bytes_read=360643 bytes_retransmit=0 bytes_invalid=0 send_seq=19387 receive_seq=19387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997907 sd_pos=1824675 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.16 cputime=5808.279 memavail=3267892 print_time=19033.374 buffer_time=2.043 print_stall=0 extruder: target=210 temp=209.1 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65000.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54745869 bytes_read=8745587 bytes_retransmit=9 bytes_invalid=0 send_seq=1052999 receive_seq=1052999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=14914 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116475 bytes_read=360659 bytes_retransmit=0 bytes_invalid=0 send_seq=19388 receive_seq=19388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997964 sd_pos=1830145 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.16 cputime=5808.385 memavail=3267892 print_time=19034.926 buffer_time=2.595 print_stall=0 extruder: target=210 temp=209.6 pwm=0.332
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65001.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54756598 bytes_read=8746764 bytes_retransmit=9 bytes_invalid=0 send_seq=1053185 receive_seq=1053185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=10962 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116481 bytes_read=360675 bytes_retransmit=0 bytes_invalid=0 send_seq=19389 receive_seq=19389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998786 adj=49997910 sd_pos=1832686 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.16 cputime=5808.459 memavail=3267896 print_time=19035.633 buffer_time=2.300 print_stall=0 extruder: target=210 temp=210.2 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65002.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54765541 bytes_read=8747756 bytes_retransmit=9 bytes_invalid=0 send_seq=1053343 receive_seq=1053343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=11296 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116487 bytes_read=360691 bytes_retransmit=0 bytes_invalid=0 send_seq=19390 receive_seq=19390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998786 adj=49997929 sd_pos=1835676 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.16 cputime=5808.578 memavail=3267896 print_time=19036.547 buffer_time=2.215 print_stall=0 extruder: target=210 temp=210.6 pwm=0.225
Stats 65003.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54775372 bytes_read=8748818 bytes_retransmit=9 bytes_invalid=0 send_seq=1053515 receive_seq=1053515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=5044 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116493 bytes_read=360707 bytes_retransmit=0 bytes_invalid=0 send_seq=19391 receive_seq=19391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998785 adj=49997943 sd_pos=1836872 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.15 cputime=5808.638 memavail=3267896 print_time=19037.355 buffer_time=2.022 print_stall=0 extruder: target=210 temp=211.0 pwm=0.225
Stats 65004.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54784000 bytes_read=8749804 bytes_retransmit=9 bytes_invalid=0 send_seq=1053666 receive_seq=1053666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116499 bytes_read=360736 bytes_retransmit=0 bytes_invalid=0 send_seq=19392 receive_seq=19392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998784 adj=49997895 sd_pos=1838471 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.15 cputime=5808.696 memavail=3267896 print_time=19038.422 buffer_time=2.089 print_stall=0 extruder: target=210 temp=211.3 pwm=0.225
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65005.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54789807 bytes_read=8750504 bytes_retransmit=9 bytes_invalid=0 send_seq=1053766 receive_seq=1053766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=716 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116505 bytes_read=360752 bytes_retransmit=0 bytes_invalid=0 send_seq=19393 receive_seq=19393 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998785 adj=49997866 sd_pos=1840348 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.15 cputime=5808.745 memavail=3267896 print_time=19039.783 buffer_time=2.449 print_stall=0 extruder: target=210 temp=211.3 pwm=0.225
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65006.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54792812 bytes_read=8751025 bytes_retransmit=9 bytes_invalid=0 send_seq=1053827 receive_seq=1053827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=4211 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116511 bytes_read=360768 bytes_retransmit=0 bytes_invalid=0 send_seq=19394 receive_seq=19394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998787 adj=49997866 sd_pos=1841379 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.15 cputime=5808.789 memavail=3267660 print_time=19040.517 buffer_time=2.183 print_stall=0 extruder: target=210 temp=211.2 pwm=0.268
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65007.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54796333 bytes_read=8751596 bytes_retransmit=9 bytes_invalid=0 send_seq=1053895 receive_seq=1053895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=7978 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116517 bytes_read=360784 bytes_retransmit=0 bytes_invalid=0 send_seq=19395 receive_seq=19395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49997856 sd_pos=1842337 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.15 cputime=5809.004 memavail=3267660 print_time=19041.675 buffer_time=2.297 print_stall=0 extruder: target=210 temp=210.9 pwm=0.321
Stats 65008.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54805518 bytes_read=8752593 bytes_retransmit=9 bytes_invalid=0 send_seq=1054054 receive_seq=1054054 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3748 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116523 bytes_read=360800 bytes_retransmit=0 bytes_invalid=0 send_seq=19396 receive_seq=19396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997898 sd_pos=1842696 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.13 cputime=5809.202 memavail=3266908 print_time=19042.691 buffer_time=2.312 print_stall=0 extruder: target=210 temp=210.5 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65009.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54813145 bytes_read=8753475 bytes_retransmit=9 bytes_invalid=0 send_seq=1054188 receive_seq=1054187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1483 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116529 bytes_read=360829 bytes_retransmit=0 bytes_invalid=0 send_seq=19397 receive_seq=19397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997944 sd_pos=1843838 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.13 cputime=5809.339 memavail=3266908 print_time=19043.550 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65010.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54817741 bytes_read=8754131 bytes_retransmit=9 bytes_invalid=0 send_seq=1054275 receive_seq=1054275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=3025 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116535 bytes_read=360845 bytes_retransmit=0 bytes_invalid=0 send_seq=19398 receive_seq=19398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997982 sd_pos=1845588 heater_bed: target=60 temp=60.0 pwm=0.018 sysload=0.13 cputime=5809.606 memavail=3266656 print_time=19044.543 buffer_time=2.162 print_stall=0 extruder: target=210 temp=209.6 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65011.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54822788 bytes_read=8754824 bytes_retransmit=9 bytes_invalid=0 send_seq=1054370 receive_seq=1054370 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=4985 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116541 bytes_read=360861 bytes_retransmit=0 bytes_invalid=0 send_seq=19399 receive_seq=19399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997981 sd_pos=1848783 heater_bed: target=60 temp=60.0 pwm=0.231 sysload=0.13 cputime=5809.760 memavail=3266152 print_time=19045.492 buffer_time=2.110 print_stall=0 extruder: target=210 temp=209.3 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65012.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54829619 bytes_read=8755661 bytes_retransmit=9 bytes_invalid=0 send_seq=1054494 receive_seq=1054494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7825 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116547 bytes_read=360877 bytes_retransmit=0 bytes_invalid=0 send_seq=19400 receive_seq=19400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998793 adj=49997966 sd_pos=1851745 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.13 cputime=5809.847 memavail=3265144 print_time=19046.472 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.1 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65013.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54836907 bytes_read=8756532 bytes_retransmit=9 bytes_invalid=0 send_seq=1054625 receive_seq=1054625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=10353 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116553 bytes_read=360893 bytes_retransmit=0 bytes_invalid=0 send_seq=19401 receive_seq=19401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997984 sd_pos=1855593 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.12 cputime=5809.969 memavail=3265144 print_time=19047.530 buffer_time=2.146 print_stall=0 extruder: target=210 temp=208.9 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65014.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54847107 bytes_read=8757629 bytes_retransmit=9 bytes_invalid=0 send_seq=1054804 receive_seq=1054804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=15009 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116559 bytes_read=360922 bytes_retransmit=0 bytes_invalid=0 send_seq=19402 receive_seq=19402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998791 adj=49997960 sd_pos=1861459 heater_bed: target=60 temp=60.0 pwm=0.014 sysload=0.12 cputime=5810.081 memavail=3265152 print_time=19049.125 buffer_time=2.741 print_stall=0 extruder: target=210 temp=209.0 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65015.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54856444 bytes_read=8758666 bytes_retransmit=9 bytes_invalid=0 send_seq=1054968 receive_seq=1054968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13507 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116565 bytes_read=360938 bytes_retransmit=0 bytes_invalid=0 send_seq=19403 receive_seq=19403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998790 adj=49997918 sd_pos=1864253 heater_bed: target=60 temp=60.0 pwm=0.232 sysload=0.12 cputime=5810.151 memavail=3265152 print_time=19049.890 buffer_time=2.504 print_stall=0 extruder: target=210 temp=209.0 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65016.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54865958 bytes_read=8759732 bytes_retransmit=9 bytes_invalid=0 send_seq=1055136 receive_seq=1055136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13077 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116571 bytes_read=360954 bytes_retransmit=0 bytes_invalid=0 send_seq=19404 receive_seq=19404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998789 adj=49997885 sd_pos=1867562 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.12 cputime=5810.227 memavail=3265156 print_time=19050.782 buffer_time=2.396 print_stall=0 extruder: target=210 temp=209.2 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65017.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54876273 bytes_read=8760834 bytes_retransmit=9 bytes_invalid=0 send_seq=1055316 receive_seq=1055316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7027 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116577 bytes_read=360970 bytes_retransmit=0 bytes_invalid=0 send_seq=19405 receive_seq=19405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998789 adj=49997860 sd_pos=1868436 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.12 cputime=5810.288 memavail=3265156 print_time=19051.428 buffer_time=2.042 print_stall=0 extruder: target=210 temp=209.5 pwm=0.360
Stats 65018.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54885861 bytes_read=8761896 bytes_retransmit=9 bytes_invalid=0 send_seq=1055485 receive_seq=1055485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1102 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116583 bytes_read=360986 bytes_retransmit=0 bytes_invalid=0 send_seq=19406 receive_seq=19406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998792 adj=49997840 sd_pos=1870037 heater_bed: target=60 temp=60.0 pwm=0.011 sysload=0.11 cputime=5810.392 memavail=3263940 print_time=19052.489 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.8 pwm=0.360
Stats 65019.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54890020 bytes_read=8762467 bytes_retransmit=9 bytes_invalid=0 send_seq=1055556 receive_seq=1055556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116589 bytes_read=361015 bytes_retransmit=0 bytes_invalid=0 send_seq=19407 receive_seq=19407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998797 adj=49997877 sd_pos=1871611 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.11 cputime=5810.473 memavail=3263940 print_time=19053.550 buffer_time=2.162 print_stall=0 extruder: target=210 temp=210.2 pwm=0.309
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65020.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=54895721 bytes_read=8763149 bytes_retransmit=9 bytes_invalid=0 send_seq=1055664 receive_seq=1055652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=130 upcoming_bytes=0 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116595 bytes_read=361031 bytes_retransmit=0 bytes_invalid=0 send_seq=19408 receive_seq=19408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998802 adj=49997876 sd_pos=1872502 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.11 cputime=5810.674 memavail=3263940 print_time=19054.725 buffer_time=2.312 print_stall=0 extruder: target=210 temp=210.5 pwm=0.309
Stats 65021.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54898711 bytes_read=8763757 bytes_retransmit=9 bytes_invalid=0 send_seq=1055727 receive_seq=1055727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=228 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116601 bytes_read=361047 bytes_retransmit=0 bytes_invalid=0 send_seq=19409 receive_seq=19409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998802 adj=49997936 sd_pos=1872726 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.11 cputime=5810.824 memavail=3263184 print_time=19055.492 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.8 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65022.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54903571 bytes_read=8764433 bytes_retransmit=9 bytes_invalid=0 send_seq=1055819 receive_seq=1055819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1937 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116607 bytes_read=361063 bytes_retransmit=0 bytes_invalid=0 send_seq=19410 receive_seq=19410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998808 adj=49997970 sd_pos=1873707 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.11 cputime=5811.039 memavail=3263184 print_time=19056.626 buffer_time=2.212 print_stall=0 extruder: target=210 temp=211.0 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65023.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54907756 bytes_read=8765040 bytes_retransmit=9 bytes_invalid=0 send_seq=1055900 receive_seq=1055900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3486 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116613 bytes_read=361079 bytes_retransmit=0 bytes_invalid=0 send_seq=19411 receive_seq=19411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998806 adj=49998041 sd_pos=1875395 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.18 cputime=5811.281 memavail=3262944 print_time=19057.552 buffer_time=2.137 print_stall=0 extruder: target=210 temp=211.0 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65024.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54913766 bytes_read=8765812 bytes_retransmit=9 bytes_invalid=0 send_seq=1056011 receive_seq=1056011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11319 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116619 bytes_read=361108 bytes_retransmit=0 bytes_invalid=0 send_seq=19412 receive_seq=19412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998805 adj=49998008 sd_pos=1880645 heater_bed: target=60 temp=60.0 pwm=0.038 sysload=0.18 cputime=5811.408 memavail=3262944 print_time=19059.100 buffer_time=2.685 print_stall=0 extruder: target=210 temp=210.8 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65025.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54920402 bytes_read=8766628 bytes_retransmit=9 bytes_invalid=0 send_seq=1056131 receive_seq=1056131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=14364 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116625 bytes_read=361124 bytes_retransmit=0 bytes_invalid=0 send_seq=19413 receive_seq=19413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998806 adj=49997883 sd_pos=1884453 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.18 cputime=5811.521 memavail=3262944 print_time=19060.135 buffer_time=2.719 print_stall=0 extruder: target=210 temp=210.4 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65026.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54928389 bytes_read=8767511 bytes_retransmit=9 bytes_invalid=0 send_seq=1056264 receive_seq=1056264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=10720 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116631 bytes_read=361140 bytes_retransmit=0 bytes_invalid=0 send_seq=19414 receive_seq=19414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998807 adj=49997900 sd_pos=1885976 heater_bed: target=60 temp=60.0 pwm=0.017 sysload=0.18 cputime=5811.576 memavail=3262944 print_time=19060.503 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.0 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65027.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54938713 bytes_read=8768627 bytes_retransmit=9 bytes_invalid=0 send_seq=1056445 receive_seq=1056445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=11159 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116637 bytes_read=361156 bytes_retransmit=0 bytes_invalid=0 send_seq=19415 receive_seq=19415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998809 adj=49997925 sd_pos=1890381 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.18 cputime=5811.665 memavail=3262956 print_time=19061.658 buffer_time=2.241 print_stall=0 extruder: target=210 temp=209.6 pwm=0.447
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65028.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54948958 bytes_read=8769738 bytes_retransmit=9 bytes_invalid=0 send_seq=1056624 receive_seq=1056624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=8853 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116643 bytes_read=361172 bytes_retransmit=0 bytes_invalid=0 send_seq=19416 receive_seq=19416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998813 adj=49997958 sd_pos=1893368 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.17 cputime=5811.740 memavail=3262200 print_time=19062.462 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.0 pwm=0.499
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65029.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54958089 bytes_read=8770695 bytes_retransmit=9 bytes_invalid=0 send_seq=1056775 receive_seq=1056775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=11496 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116649 bytes_read=361201 bytes_retransmit=0 bytes_invalid=0 send_seq=19417 receive_seq=19417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998812 adj=49997959 sd_pos=1897162 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.17 cputime=5811.828 memavail=3262200 print_time=19063.764 buffer_time=2.345 print_stall=0 extruder: target=210 temp=208.8 pwm=0.499
Stats 65030.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=54967846 bytes_read=8771772 bytes_retransmit=9 bytes_invalid=0 send_seq=1056947 receive_seq=1056947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=4643 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116655 bytes_read=361217 bytes_retransmit=0 bytes_invalid=0 send_seq=19418 receive_seq=19418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998812 adj=49997923 sd_pos=1898394 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.17 cputime=5811.901 memavail=3262204 print_time=19064.555 buffer_time=2.135 print_stall=0 extruder: target=210 temp=208.7 pwm=0.499
Stats 65031.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54975971 bytes_read=8772684 bytes_retransmit=9 bytes_invalid=0 send_seq=1057083 receive_seq=1057083 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116661 bytes_read=361233 bytes_retransmit=0 bytes_invalid=0 send_seq=19419 receive_seq=19419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998814 adj=49997918 sd_pos=1899973 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.17 cputime=5812.007 memavail=3262204 print_time=19065.611 buffer_time=2.191 print_stall=0 extruder: target=210 temp=208.9 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65032.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54981002 bytes_read=8773381 bytes_retransmit=9 bytes_invalid=0 send_seq=1057179 receive_seq=1057179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116667 bytes_read=361249 bytes_retransmit=0 bytes_invalid=0 send_seq=19420 receive_seq=19420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998816 adj=49997826 sd_pos=1901222 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.17 cputime=5812.195 memavail=3267144 print_time=19066.816 buffer_time=2.324 print_stall=0 extruder: target=210 temp=209.2 pwm=0.378
Stats 65033.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54984285 bytes_read=8773932 bytes_retransmit=9 bytes_invalid=0 send_seq=1057246 receive_seq=1057246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116673 bytes_read=361265 bytes_retransmit=0 bytes_invalid=0 send_seq=19421 receive_seq=19421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998815 adj=49997824 sd_pos=1901584 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.16 cputime=5812.358 memavail=3265944 print_time=19067.641 buffer_time=2.148 print_stall=0 extruder: target=210 temp=209.8 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65034.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54989028 bytes_read=8774584 bytes_retransmit=9 bytes_invalid=0 send_seq=1057336 receive_seq=1057336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=781 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116679 bytes_read=361294 bytes_retransmit=0 bytes_invalid=0 send_seq=19422 receive_seq=19422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998814 adj=49997843 sd_pos=1902468 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.16 cputime=5812.534 memavail=3265944 print_time=19068.715 buffer_time=2.221 print_stall=0 extruder: target=210 temp=210.3 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65035.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=54992930 bytes_read=8775176 bytes_retransmit=9 bytes_invalid=0 send_seq=1057412 receive_seq=1057411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2051 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116685 bytes_read=361310 bytes_retransmit=0 bytes_invalid=0 send_seq=19423 receive_seq=19423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998816 adj=49997839 sd_pos=1903280 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.16 cputime=5812.758 memavail=3265944 print_time=19069.609 buffer_time=2.114 print_stall=0 extruder: target=210 temp=210.7 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65036.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=54997816 bytes_read=8775868 bytes_retransmit=9 bytes_invalid=0 send_seq=1057503 receive_seq=1057503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7771 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116691 bytes_read=361325 bytes_retransmit=0 bytes_invalid=0 send_seq=19424 receive_seq=19424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998815 adj=49997860 sd_pos=1907431 heater_bed: target=60 temp=60.0 pwm=0.007 sysload=0.16 cputime=5812.891 memavail=3265944 print_time=19070.906 buffer_time=2.410 print_stall=0 extruder: target=210 temp=211.0 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65037.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55003904 bytes_read=8776618 bytes_retransmit=9 bytes_invalid=0 send_seq=1057613 receive_seq=1057613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=9286 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116697 bytes_read=361340 bytes_retransmit=0 bytes_invalid=0 send_seq=19425 receive_seq=19425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998816 adj=49997872 sd_pos=1910084 heater_bed: target=60 temp=60.0 pwm=0.028 sysload=0.16 cputime=5812.960 memavail=3264936 print_time=19071.700 buffer_time=2.203 print_stall=0 extruder: target=210 temp=211.0 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65038.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55011690 bytes_read=8777531 bytes_retransmit=9 bytes_invalid=0 send_seq=1057753 receive_seq=1057753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=10956 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116703 bytes_read=361355 bytes_retransmit=0 bytes_invalid=0 send_seq=19426 receive_seq=19426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998823 adj=49997911 sd_pos=1913796 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.22 cputime=5813.101 memavail=3265196 print_time=19072.623 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.9 pwm=0.314
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65039.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55021812 bytes_read=8778597 bytes_retransmit=9 bytes_invalid=0 send_seq=1057923 receive_seq=1057923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=11139 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=116709 bytes_read=361370 bytes_retransmit=0 bytes_invalid=0 send_seq=19427 receive_seq=19427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998821 adj=49997967 sd_pos=1918005 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.22 cputime=5813.187 memavail=3265196 print_time=19073.718 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.4 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65040.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55032057 bytes_read=8779694 bytes_retransmit=9 bytes_invalid=0 send_seq=1058102 receive_seq=1058102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=17803 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116715 bytes_read=361398 bytes_retransmit=0 bytes_invalid=0 send_seq=19428 receive_seq=19428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998821 adj=49997936 sd_pos=1924208 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.22 cputime=5813.292 memavail=3265196 print_time=19075.431 buffer_time=2.932 print_stall=0 extruder: target=210 temp=210.0 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65041.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55041442 bytes_read=8780757 bytes_retransmit=9 bytes_invalid=0 send_seq=1058268 receive_seq=1058268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11911 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116721 bytes_read=361413 bytes_retransmit=0 bytes_invalid=0 send_seq=19429 receive_seq=19429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998822 adj=49997907 sd_pos=1924711 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.22 cputime=5813.347 memavail=3265196 print_time=19075.825 buffer_time=2.325 print_stall=0 extruder: target=210 temp=209.6 pwm=0.440
Stats 65042.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55051611 bytes_read=8781868 bytes_retransmit=9 bytes_invalid=0 send_seq=1058447 receive_seq=1058447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=4630 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116727 bytes_read=361429 bytes_retransmit=0 bytes_invalid=0 send_seq=19430 receive_seq=19430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998823 adj=49997949 sd_pos=1925919 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.22 cputime=5813.406 memavail=3265196 print_time=19076.612 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.3 pwm=0.493
Stats 65043.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55059717 bytes_read=8782795 bytes_retransmit=9 bytes_invalid=0 send_seq=1058592 receive_seq=1058592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116733 bytes_read=361445 bytes_retransmit=0 bytes_invalid=0 send_seq=19431 receive_seq=19431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998821 adj=49997976 sd_pos=1927476 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.29 cputime=5813.489 memavail=3265196 print_time=19077.662 buffer_time=2.160 print_stall=0 extruder: target=210 temp=209.2 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65044.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55063551 bytes_read=8783397 bytes_retransmit=9 bytes_invalid=0 send_seq=1058669 receive_seq=1058669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116739 bytes_read=361461 bytes_retransmit=0 bytes_invalid=0 send_seq=19432 receive_seq=19432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998827 adj=49997968 sd_pos=1928677 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.29 cputime=5813.564 memavail=3264720 print_time=19078.611 buffer_time=2.109 print_stall=0 extruder: target=210 temp=209.2 pwm=0.440
Stats 65045.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55068406 bytes_read=8784078 bytes_retransmit=9 bytes_invalid=0 send_seq=1058762 receive_seq=1058762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116745 bytes_read=361490 bytes_retransmit=0 bytes_invalid=0 send_seq=19433 receive_seq=19433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998829 adj=49998039 sd_pos=1928958 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.29 cputime=5813.805 memavail=3264728 print_time=19079.676 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.5 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65046.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=55072260 bytes_read=8784681 bytes_retransmit=9 bytes_invalid=0 send_seq=1058839 receive_seq=1058839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116751 bytes_read=361506 bytes_retransmit=0 bytes_invalid=0 send_seq=19434 receive_seq=19434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998827 adj=49998023 sd_pos=1929420 heater_bed: target=60 temp=60.0 pwm=0.262 sysload=0.29 cputime=5813.997 memavail=3264728 print_time=19080.568 buffer_time=2.064 print_stall=0 extruder: target=210 temp=209.8 pwm=0.378
Stats 65047.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=55076728 bytes_read=8785328 bytes_retransmit=9 bytes_invalid=0 send_seq=1058925 receive_seq=1058925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=876 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116757 bytes_read=361522 bytes_retransmit=0 bytes_invalid=0 send_seq=19435 receive_seq=19435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998829 adj=49998003 sd_pos=1929639 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5814.266 memavail=3264728 print_time=19081.607 buffer_time=2.103 print_stall=0 extruder: target=210 temp=210.1 pwm=0.320
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65048.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=55081068 bytes_read=8785960 bytes_retransmit=9 bytes_invalid=0 send_seq=1059009 receive_seq=1059009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11535 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116763 bytes_read=361538 bytes_retransmit=0 bytes_invalid=0 send_seq=19436 receive_seq=19436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998833 adj=49997947 sd_pos=1935003 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.26 cputime=5814.383 memavail=3263724 print_time=19083.320 buffer_time=2.816 print_stall=0 extruder: target=210 temp=210.6 pwm=0.267
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65049.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=55086402 bytes_read=8786656 bytes_retransmit=9 bytes_invalid=0 send_seq=1059108 receive_seq=1059108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=15750 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116769 bytes_read=361554 bytes_retransmit=0 bytes_invalid=0 send_seq=19437 receive_seq=19437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998830 adj=49997923 sd_pos=1938993 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.26 cputime=5814.455 memavail=3263728 print_time=19084.355 buffer_time=2.849 print_stall=0 extruder: target=210 temp=210.7 pwm=0.267
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65050.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000004 bytes_write=55094773 bytes_read=8787623 bytes_retransmit=9 bytes_invalid=0 send_seq=1059258 receive_seq=1059258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=11985 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116775 bytes_read=361583 bytes_retransmit=0 bytes_invalid=0 send_seq=19438 receive_seq=19438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998828 adj=49997871 sd_pos=1940497 heater_bed: target=60 temp=60.0 pwm=0.028 sysload=0.26 cputime=5814.556 memavail=3263728 print_time=19084.724 buffer_time=2.217 print_stall=0 extruder: target=210 temp=210.8 pwm=0.267
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65051.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55105005 bytes_read=8788755 bytes_retransmit=9 bytes_invalid=0 send_seq=1059438 receive_seq=1059438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=12196 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116781 bytes_read=361599 bytes_retransmit=0 bytes_invalid=0 send_seq=19439 receive_seq=19439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998829 adj=49997874 sd_pos=1944683 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.26 cputime=5814.684 memavail=3263728 print_time=19085.846 buffer_time=2.339 print_stall=0 extruder: target=210 temp=210.7 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65052.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55115397 bytes_read=8789872 bytes_retransmit=9 bytes_invalid=0 send_seq=1059621 receive_seq=1059621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10163 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116787 bytes_read=361615 bytes_retransmit=0 bytes_invalid=0 send_seq=19440 receive_seq=19440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998826 adj=49997893 sd_pos=1947426 heater_bed: target=60 temp=60.0 pwm=0.232 sysload=0.26 cputime=5814.759 memavail=3263728 print_time=19086.667 buffer_time=2.159 print_stall=0 extruder: target=210 temp=210.3 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65053.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55124321 bytes_read=8790874 bytes_retransmit=9 bytes_invalid=0 send_seq=1059778 receive_seq=1059778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=10331 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116793 bytes_read=361631 bytes_retransmit=0 bytes_invalid=0 send_seq=19441 receive_seq=19441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998825 adj=49997858 sd_pos=1950790 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.24 cputime=5814.835 memavail=3263728 print_time=19087.547 buffer_time=2.039 print_stall=0 extruder: target=210 temp=210.0 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65054.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55134537 bytes_read=8791980 bytes_retransmit=9 bytes_invalid=0 send_seq=1059956 receive_seq=1059956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=7392 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116799 bytes_read=361647 bytes_retransmit=0 bytes_invalid=0 send_seq=19442 receive_seq=19442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998826 adj=49997865 sd_pos=1952615 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.24 cputime=5814.911 memavail=3263728 print_time=19088.909 buffer_time=2.400 print_stall=0 extruder: target=210 temp=209.7 pwm=0.468
Stats 65055.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55144952 bytes_read=8793097 bytes_retransmit=9 bytes_invalid=0 send_seq=1060139 receive_seq=1060139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=894 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116805 bytes_read=361676 bytes_retransmit=0 bytes_invalid=0 send_seq=19443 receive_seq=19443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998825 adj=49997912 sd_pos=1953619 heater_bed: target=60 temp=60.0 pwm=0.007 sysload=0.24 cputime=5814.968 memavail=3263728 print_time=19089.636 buffer_time=2.126 print_stall=0 extruder: target=210 temp=209.5 pwm=0.468
Stats 65056.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55150055 bytes_read=8793790 bytes_retransmit=9 bytes_invalid=0 send_seq=1060235 receive_seq=1060231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=339 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116817 bytes_read=361708 bytes_retransmit=0 bytes_invalid=0 send_seq=19445 receive_seq=19445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998822 adj=49997901 sd_pos=1955327 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.24 cputime=5815.043 memavail=3263728 print_time=19090.768 buffer_time=2.250 print_stall=0 extruder: target=210 temp=209.5 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65057.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55154779 bytes_read=8794487 bytes_retransmit=9 bytes_invalid=0 send_seq=1060325 receive_seq=1060325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=697 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116823 bytes_read=361724 bytes_retransmit=0 bytes_invalid=0 send_seq=19446 receive_seq=19446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998825 adj=49997797 sd_pos=1955904 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.24 cputime=5815.192 memavail=3263728 print_time=19091.733 buffer_time=2.214 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
Stats 65058.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55158771 bytes_read=8795084 bytes_retransmit=9 bytes_invalid=0 send_seq=1060404 receive_seq=1060404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=156 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116829 bytes_read=361740 bytes_retransmit=0 bytes_invalid=0 send_seq=19447 receive_seq=19447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998827 adj=49997826 sd_pos=1956152 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.22 cputime=5815.395 memavail=3262980 print_time=19092.672 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.8 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65059.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55163799 bytes_read=8795766 bytes_retransmit=9 bytes_invalid=0 send_seq=1060498 receive_seq=1060498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=491 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=116835 bytes_read=361756 bytes_retransmit=0 bytes_invalid=0 send_seq=19448 receive_seq=19448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998827 adj=49997868 sd_pos=1956517 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.22 cputime=5815.643 memavail=3262980 print_time=19093.671 buffer_time=2.151 print_stall=0 extruder: target=210 temp=210.1 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65060.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55167373 bytes_read=8796337 bytes_retransmit=9 bytes_invalid=0 send_seq=1060569 receive_seq=1060569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=3651 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116841 bytes_read=361785 bytes_retransmit=0 bytes_invalid=0 send_seq=19449 receive_seq=19449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998834 adj=49997855 sd_pos=1957897 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5815.835 memavail=3262980 print_time=19094.770 buffer_time=2.249 print_stall=0 extruder: target=210 temp=210.4 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65061.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55172774 bytes_read=8797060 bytes_retransmit=9 bytes_invalid=0 send_seq=1060670 receive_seq=1060670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=8561 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116847 bytes_read=361801 bytes_retransmit=0 bytes_invalid=0 send_seq=19450 receive_seq=19450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998831 adj=49997950 sd_pos=1961752 heater_bed: target=60 temp=60.0 pwm=0.299 sysload=0.22 cputime=5815.911 memavail=3262984 print_time=19095.763 buffer_time=2.241 print_stall=0 extruder: target=210 temp=210.6 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65062.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55178855 bytes_read=8797837 bytes_retransmit=9 bytes_invalid=0 send_seq=1060782 receive_seq=1060782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=16199 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116853 bytes_read=361817 bytes_retransmit=0 bytes_invalid=0 send_seq=19451 receive_seq=19451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998829 adj=49997938 sd_pos=1967166 heater_bed: target=60 temp=60.0 pwm=0.041 sysload=0.22 cputime=5816.041 memavail=3262988 print_time=19097.228 buffer_time=2.705 print_stall=0 extruder: target=210 temp=210.7 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65063.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55189394 bytes_read=8798983 bytes_retransmit=9 bytes_invalid=0 send_seq=1060968 receive_seq=1060968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=15726 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116859 bytes_read=361833 bytes_retransmit=0 bytes_invalid=0 send_seq=19452 receive_seq=19452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998827 adj=49997900 sd_pos=1971146 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.20 cputime=5816.128 memavail=3262988 print_time=19098.325 buffer_time=2.801 print_stall=0 extruder: target=210 temp=210.5 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65064.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55198429 bytes_read=8799980 bytes_retransmit=9 bytes_invalid=0 send_seq=1061127 receive_seq=1061127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=14481 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=116865 bytes_read=361849 bytes_retransmit=0 bytes_invalid=0 send_seq=19453 receive_seq=19453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998826 adj=49997883 sd_pos=1974059 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.20 cputime=5816.202 memavail=3262988 print_time=19099.118 buffer_time=2.594 print_stall=0 extruder: target=210 temp=210.3 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65065.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55208662 bytes_read=8801057 bytes_retransmit=9 bytes_invalid=0 send_seq=1061299 receive_seq=1061299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=14196 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116871 bytes_read=361878 bytes_retransmit=0 bytes_invalid=0 send_seq=19454 receive_seq=19454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998826 adj=49997886 sd_pos=1977606 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.20 cputime=5816.280 memavail=3262988 print_time=19100.060 buffer_time=2.534 print_stall=0 extruder: target=210 temp=209.9 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65066.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55218804 bytes_read=8802184 bytes_retransmit=9 bytes_invalid=0 send_seq=1061478 receive_seq=1061478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=7578 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116877 bytes_read=361894 bytes_retransmit=0 bytes_invalid=0 send_seq=19455 receive_seq=19455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998828 adj=49997874 sd_pos=1978567 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.20 cputime=5816.339 memavail=3262992 print_time=19100.605 buffer_time=2.079 print_stall=0 extruder: target=210 temp=209.6 pwm=0.455
Stats 65067.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55228060 bytes_read=8803161 bytes_retransmit=9 bytes_invalid=0 send_seq=1061633 receive_seq=1061633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1864 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116883 bytes_read=361910 bytes_retransmit=0 bytes_invalid=0 send_seq=19456 receive_seq=19456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998831 adj=49997915 sd_pos=1980211 heater_bed: target=60 temp=60.0 pwm=0.308 sysload=0.20 cputime=5816.438 memavail=3262992 print_time=19101.644 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.4 pwm=0.455
Stats 65068.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55233148 bytes_read=8803867 bytes_retransmit=9 bytes_invalid=0 send_seq=1061728 receive_seq=1061728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116889 bytes_read=361926 bytes_retransmit=0 bytes_invalid=0 send_seq=19457 receive_seq=19457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997921 sd_pos=1981780 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.27 cputime=5816.517 memavail=3266960 print_time=19102.682 buffer_time=2.154 print_stall=0 extruder: target=210 temp=209.3 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65069.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55237715 bytes_read=8804498 bytes_retransmit=9 bytes_invalid=0 send_seq=1061814 receive_seq=1061814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=116895 bytes_read=361942 bytes_retransmit=0 bytes_invalid=0 send_seq=19458 receive_seq=19458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997954 sd_pos=1982251 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.27 cputime=5816.736 memavail=3265988 print_time=19103.617 buffer_time=2.088 print_stall=0 extruder: target=210 temp=209.4 pwm=0.405
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65070.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55241736 bytes_read=8805090 bytes_retransmit=9 bytes_invalid=0 send_seq=1061893 receive_seq=1061893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=230 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=116901 bytes_read=361971 bytes_retransmit=0 bytes_invalid=0 send_seq=19459 receive_seq=19459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997975 sd_pos=1982756 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.27 cputime=5816.957 memavail=3265988 print_time=19104.728 buffer_time=2.198 print_stall=0 extruder: target=210 temp=209.5 pwm=0.405
Stats 65071.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55246326 bytes_read=8805777 bytes_retransmit=9 bytes_invalid=0 send_seq=1061981 receive_seq=1061981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=518 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=116907 bytes_read=361987 bytes_retransmit=0 bytes_invalid=0 send_seq=19460 receive_seq=19460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997951 sd_pos=1982895 heater_bed: target=60 temp=60.0 pwm=0.311 sysload=0.27 cputime=5817.172 memavail=3265992 print_time=19105.562 buffer_time=2.031 print_stall=0 extruder: target=210 temp=209.8 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65072.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55250299 bytes_read=8806359 bytes_retransmit=9 bytes_invalid=0 send_seq=1062057 receive_seq=1062057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8684 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=116913 bytes_read=362003 bytes_retransmit=0 bytes_invalid=0 send_seq=19461 receive_seq=19461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997956 sd_pos=1986900 heater_bed: target=60 temp=60.0 pwm=0.001 sysload=0.27 cputime=5817.349 memavail=3265992 print_time=19107.189 buffer_time=2.658 print_stall=0 extruder: target=210 temp=210.1 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65073.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55255892 bytes_read=8807061 bytes_retransmit=9 bytes_invalid=0 send_seq=1062157 receive_seq=1062157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=10143 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=116919 bytes_read=362019 bytes_retransmit=0 bytes_invalid=0 send_seq=19462 receive_seq=19462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997903 sd_pos=1989791 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.25 cputime=5817.412 memavail=3264048 print_time=19107.937 buffer_time=2.403 print_stall=0 extruder: target=210 temp=210.3 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65074.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55263193 bytes_read=8807947 bytes_retransmit=9 bytes_invalid=0 send_seq=1062288 receive_seq=1062288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12982 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=116925 bytes_read=362035 bytes_retransmit=0 bytes_invalid=0 send_seq=19463 receive_seq=19463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997894 sd_pos=1993701 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.25 cputime=5817.498 memavail=3264304 print_time=19108.922 buffer_time=2.388 print_stall=0 extruder: target=210 temp=210.4 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65075.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55273347 bytes_read=8809044 bytes_retransmit=9 bytes_invalid=0 send_seq=1062467 receive_seq=1062467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=12014 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116931 bytes_read=362064 bytes_retransmit=0 bytes_invalid=0 send_seq=19464 receive_seq=19464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997812 sd_pos=1997440 heater_bed: target=60 temp=60.0 pwm=0.286 sysload=0.25 cputime=5817.636 memavail=3265204 print_time=19109.935 buffer_time=2.400 print_stall=0 extruder: target=210 temp=210.4 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65076.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55283009 bytes_read=8810117 bytes_retransmit=9 bytes_invalid=0 send_seq=1062638 receive_seq=1062638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=11081 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116937 bytes_read=362080 bytes_retransmit=0 bytes_invalid=0 send_seq=19465 receive_seq=19465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997808 sd_pos=2000421 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.25 cputime=5817.711 memavail=3265076 print_time=19110.756 buffer_time=2.221 print_stall=0 extruder: target=210 temp=210.2 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65077.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55292703 bytes_read=8811163 bytes_retransmit=9 bytes_invalid=0 send_seq=1062801 receive_seq=1062801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11479 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116943 bytes_read=362096 bytes_retransmit=0 bytes_invalid=0 send_seq=19466 receive_seq=19466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997831 sd_pos=2003942 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.25 cputime=5817.789 memavail=3264836 print_time=19111.709 buffer_time=2.172 print_stall=0 extruder: target=210 temp=210.0 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65078.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55302892 bytes_read=8812260 bytes_retransmit=9 bytes_invalid=0 send_seq=1062980 receive_seq=1062980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=6416 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116949 bytes_read=362112 bytes_retransmit=0 bytes_invalid=0 send_seq=19467 receive_seq=19467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998833 adj=49997860 sd_pos=2005063 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.23 cputime=5817.856 memavail=3265352 print_time=19112.562 buffer_time=2.024 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
Stats 65079.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55312961 bytes_read=8813307 bytes_retransmit=9 bytes_invalid=0 send_seq=1063149 receive_seq=1063149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=116955 bytes_read=362128 bytes_retransmit=0 bytes_invalid=0 send_seq=19468 receive_seq=19468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998834 adj=49997870 sd_pos=2006633 heater_bed: target=60 temp=60.0 pwm=0.262 sysload=0.23 cputime=5817.918 memavail=3265356 print_time=19113.599 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65080.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55316499 bytes_read=8813884 bytes_retransmit=9 bytes_invalid=0 send_seq=1063219 receive_seq=1063219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116961 bytes_read=362157 bytes_retransmit=0 bytes_invalid=0 send_seq=19469 receive_seq=19469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998841 adj=49997894 sd_pos=2008340 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.23 cputime=5817.976 memavail=3271164 print_time=19114.735 buffer_time=2.196 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65081.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55321377 bytes_read=8814541 bytes_retransmit=9 bytes_invalid=0 send_seq=1063307 receive_seq=1063307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116967 bytes_read=362173 bytes_retransmit=0 bytes_invalid=0 send_seq=19470 receive_seq=19470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998841 adj=49997921 sd_pos=2008469 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.23 cputime=5818.164 memavail=3268392 print_time=19115.659 buffer_time=2.119 print_stall=0 extruder: target=210 temp=209.7 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65082.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55324669 bytes_read=8815078 bytes_retransmit=9 bytes_invalid=0 send_seq=1063374 receive_seq=1063374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1613 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116973 bytes_read=362189 bytes_retransmit=0 bytes_invalid=0 send_seq=19471 receive_seq=19471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998841 adj=49997916 sd_pos=2008880 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.23 cputime=5818.397 memavail=3268392 print_time=19116.810 buffer_time=2.270 print_stall=0 extruder: target=210 temp=209.8 pwm=0.382
Stats 65083.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55329942 bytes_read=8815804 bytes_retransmit=9 bytes_invalid=0 send_seq=1063473 receive_seq=1063473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=651 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116979 bytes_read=362205 bytes_retransmit=0 bytes_invalid=0 send_seq=19472 receive_seq=19472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997901 sd_pos=2008994 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5818.620 memavail=3268392 print_time=19117.609 buffer_time=2.068 print_stall=0 extruder: target=210 temp=210.1 pwm=0.382
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65084.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55333962 bytes_read=8816396 bytes_retransmit=9 bytes_invalid=0 send_seq=1063551 receive_seq=1063551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=9138 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=116985 bytes_read=362221 bytes_retransmit=0 bytes_invalid=0 send_seq=19473 receive_seq=19473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997890 sd_pos=2013099 heater_bed: target=60 temp=60.0 pwm=0.331 sysload=0.29 cputime=5818.776 memavail=3268140 print_time=19119.229 buffer_time=2.687 print_stall=0 extruder: target=210 temp=210.1 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65085.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55339548 bytes_read=8817118 bytes_retransmit=9 bytes_invalid=0 send_seq=1063655 receive_seq=1063655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=10808 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116991 bytes_read=362250 bytes_retransmit=0 bytes_invalid=0 send_seq=19474 receive_seq=19474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997894 sd_pos=2015625 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5818.841 memavail=3267384 print_time=19119.999 buffer_time=2.456 print_stall=0 extruder: target=210 temp=210.3 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65086.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55347238 bytes_read=8818045 bytes_retransmit=9 bytes_invalid=0 send_seq=1063791 receive_seq=1063791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=13798 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=116997 bytes_read=362266 bytes_retransmit=0 bytes_invalid=0 send_seq=19475 receive_seq=19475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997882 sd_pos=2019660 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.29 cputime=5818.956 memavail=3267384 print_time=19121.022 buffer_time=2.479 print_stall=0 extruder: target=210 temp=210.3 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65087.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55357353 bytes_read=8819132 bytes_retransmit=9 bytes_invalid=0 send_seq=1063968 receive_seq=1063968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=12519 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117003 bytes_read=362282 bytes_retransmit=0 bytes_invalid=0 send_seq=19476 receive_seq=19476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997885 sd_pos=2023280 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.29 cputime=5819.033 memavail=3267384 print_time=19121.908 buffer_time=2.364 print_stall=0 extruder: target=210 temp=210.2 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65088.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55366928 bytes_read=8820179 bytes_retransmit=9 bytes_invalid=0 send_seq=1064137 receive_seq=1064137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=11002 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117009 bytes_read=362298 bytes_retransmit=0 bytes_invalid=0 send_seq=19477 receive_seq=19477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997870 sd_pos=2026008 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.35 cputime=5819.109 memavail=3267148 print_time=19122.717 buffer_time=2.172 print_stall=0 extruder: target=210 temp=210.1 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65089.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55376993 bytes_read=8821300 bytes_retransmit=9 bytes_invalid=0 send_seq=1064315 receive_seq=1064315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10573 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117015 bytes_read=362314 bytes_retransmit=0 bytes_invalid=0 send_seq=19478 receive_seq=19478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997901 sd_pos=2029682 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.35 cputime=5819.188 memavail=3267148 print_time=19123.646 buffer_time=2.101 print_stall=0 extruder: target=210 temp=209.8 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65090.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55387183 bytes_read=8822402 bytes_retransmit=9 bytes_invalid=0 send_seq=1064495 receive_seq=1064495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=6475 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117021 bytes_read=362343 bytes_retransmit=0 bytes_invalid=0 send_seq=19479 receive_seq=19479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997894 sd_pos=2031233 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.35 cputime=5819.258 memavail=3267148 print_time=19124.801 buffer_time=2.252 print_stall=0 extruder: target=210 temp=209.8 pwm=0.376
Stats 65091.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55396599 bytes_read=8823460 bytes_retransmit=9 bytes_invalid=0 send_seq=1064661 receive_seq=1064661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=0 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117027 bytes_read=362359 bytes_retransmit=0 bytes_invalid=0 send_seq=19480 receive_seq=19480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997881 sd_pos=2032393 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.35 cputime=5819.336 memavail=3267148 print_time=19125.572 buffer_time=2.023 print_stall=0 extruder: target=210 temp=209.8 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65092.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55399972 bytes_read=8823966 bytes_retransmit=9 bytes_invalid=0 send_seq=1064719 receive_seq=1064719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117033 bytes_read=362375 bytes_retransmit=0 bytes_invalid=0 send_seq=19481 receive_seq=19481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997908 sd_pos=2034042 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.35 cputime=5819.407 memavail=3271788 print_time=19126.669 buffer_time=2.118 print_stall=0 extruder: target=210 temp=209.9 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65093.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55404810 bytes_read=8824633 bytes_retransmit=9 bytes_invalid=0 send_seq=1064812 receive_seq=1064812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117039 bytes_read=362391 bytes_retransmit=0 bytes_invalid=0 send_seq=19482 receive_seq=19482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998840 adj=49997927 sd_pos=2034170 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.40 cputime=5819.703 memavail=3268776 print_time=19127.572 buffer_time=2.020 print_stall=0 extruder: target=210 temp=210.0 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65094.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55408357 bytes_read=8825195 bytes_retransmit=9 bytes_invalid=0 send_seq=1064881 receive_seq=1064881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1191 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117045 bytes_read=362407 bytes_retransmit=0 bytes_invalid=0 send_seq=19483 receive_seq=19483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997916 sd_pos=2034547 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.40 cputime=5819.929 memavail=3268524 print_time=19128.696 buffer_time=2.144 print_stall=0 extruder: target=210 temp=210.1 pwm=0.353
Stats 65095.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55413725 bytes_read=8825911 bytes_retransmit=9 bytes_invalid=0 send_seq=1064981 receive_seq=1064981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1139 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=117051 bytes_read=362436 bytes_retransmit=0 bytes_invalid=0 send_seq=19484 receive_seq=19484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997839 sd_pos=2034689 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.40 cputime=5820.219 memavail=3268032 print_time=19129.758 buffer_time=2.192 print_stall=0 extruder: target=210 temp=210.3 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65096.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=55417733 bytes_read=8826514 bytes_retransmit=9 bytes_invalid=0 send_seq=1065058 receive_seq=1065058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=11002 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=117057 bytes_read=362452 bytes_retransmit=0 bytes_invalid=0 send_seq=19485 receive_seq=19485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997874 sd_pos=2040184 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.40 cputime=5820.320 memavail=3268032 print_time=19131.329 buffer_time=2.762 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65097.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=55423498 bytes_read=8827251 bytes_retransmit=9 bytes_invalid=0 send_seq=1065162 receive_seq=1065162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=15681 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=117063 bytes_read=362468 bytes_retransmit=0 bytes_invalid=0 send_seq=19486 receive_seq=19486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997894 sd_pos=2044554 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.40 cputime=5820.394 memavail=3267780 print_time=19132.452 buffer_time=2.884 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65098.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=55431186 bytes_read=8828157 bytes_retransmit=9 bytes_invalid=0 send_seq=1065300 receive_seq=1065300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=15836 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=117069 bytes_read=362484 bytes_retransmit=0 bytes_invalid=0 send_seq=19487 receive_seq=19487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997910 sd_pos=2048042 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.37 cputime=5820.503 memavail=3268584 print_time=19133.230 buffer_time=2.663 print_stall=0 extruder: target=210 temp=210.4 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65099.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=55441699 bytes_read=8829284 bytes_retransmit=9 bytes_invalid=0 send_seq=1065485 receive_seq=1065485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=14796 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=117075 bytes_read=362500 bytes_retransmit=0 bytes_invalid=0 send_seq=19488 receive_seq=19488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997924 sd_pos=2051223 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.37 cputime=5820.580 memavail=3268584 print_time=19134.141 buffer_time=2.573 print_stall=0 extruder: target=210 temp=210.2 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65100.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=55451897 bytes_read=8830396 bytes_retransmit=9 bytes_invalid=0 send_seq=1065664 receive_seq=1065664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14272 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117081 bytes_read=362529 bytes_retransmit=0 bytes_invalid=0 send_seq=19489 receive_seq=19489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997928 sd_pos=2054936 heater_bed: target=60 temp=60.0 pwm=0.228 sysload=0.37 cputime=5820.661 memavail=3268584 print_time=19135.136 buffer_time=2.567 print_stall=0 extruder: target=210 temp=210.0 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65101.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55461607 bytes_read=8831478 bytes_retransmit=9 bytes_invalid=0 send_seq=1065834 receive_seq=1065834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=12525 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117087 bytes_read=362545 bytes_retransmit=0 bytes_invalid=0 send_seq=19490 receive_seq=19490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997937 sd_pos=2056884 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.37 cputime=5820.734 memavail=3268584 print_time=19135.990 buffer_time=2.420 print_stall=0 extruder: target=210 temp=209.7 pwm=0.418
Stats 65102.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55471543 bytes_read=8832555 bytes_retransmit=9 bytes_invalid=0 send_seq=1066010 receive_seq=1066010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=5639 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117093 bytes_read=362561 bytes_retransmit=0 bytes_invalid=0 send_seq=19491 receive_seq=19491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997918 sd_pos=2058085 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.37 cputime=5820.793 memavail=3268584 print_time=19136.758 buffer_time=2.188 print_stall=0 extruder: target=210 temp=209.5 pwm=0.418
Stats 65103.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55480687 bytes_read=8833577 bytes_retransmit=9 bytes_invalid=0 send_seq=1066171 receive_seq=1066171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117099 bytes_read=362577 bytes_retransmit=0 bytes_invalid=0 send_seq=19492 receive_seq=19492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997921 sd_pos=2059679 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.34 cputime=5820.855 memavail=3268584 print_time=19137.781 buffer_time=2.210 print_stall=0 extruder: target=210 temp=209.5 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65104.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55484717 bytes_read=8834148 bytes_retransmit=9 bytes_invalid=0 send_seq=1066242 receive_seq=1066242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117105 bytes_read=362593 bytes_retransmit=0 bytes_invalid=0 send_seq=19493 receive_seq=19493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997899 sd_pos=2060861 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.34 cputime=5820.949 memavail=3268584 print_time=19138.702 buffer_time=2.131 print_stall=0 extruder: target=210 temp=209.5 pwm=0.418
Stats 65105.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55488930 bytes_read=8834745 bytes_retransmit=9 bytes_invalid=0 send_seq=1066321 receive_seq=1066321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117111 bytes_read=362622 bytes_retransmit=0 bytes_invalid=0 send_seq=19494 receive_seq=19494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997836 sd_pos=2060933 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.34 cputime=5821.206 memavail=3268592 print_time=19139.780 buffer_time=2.206 print_stall=0 extruder: target=210 temp=209.7 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65106.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55493055 bytes_read=8835383 bytes_retransmit=9 bytes_invalid=0 send_seq=1066402 receive_seq=1066402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117117 bytes_read=362638 bytes_retransmit=0 bytes_invalid=0 send_seq=19495 receive_seq=19495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997815 sd_pos=2061293 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.34 cputime=5821.395 memavail=3267348 print_time=19140.667 buffer_time=2.093 print_stall=0 extruder: target=210 temp=209.9 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65107.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55497148 bytes_read=8836004 bytes_retransmit=9 bytes_invalid=0 send_seq=1066483 receive_seq=1066483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=5341 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117123 bytes_read=362654 bytes_retransmit=0 bytes_invalid=0 send_seq=19496 receive_seq=19496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997798 sd_pos=2063660 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.34 cputime=5821.641 memavail=3267348 print_time=19142.185 buffer_time=2.610 print_stall=0 extruder: target=210 temp=210.1 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65108.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55501740 bytes_read=8836651 bytes_retransmit=9 bytes_invalid=0 send_seq=1066572 receive_seq=1066572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=9369 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117129 bytes_read=362670 bytes_retransmit=0 bytes_invalid=0 send_seq=19497 receive_seq=19497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997829 sd_pos=2066711 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.31 cputime=5821.703 memavail=3265108 print_time=19143.044 buffer_time=2.469 print_stall=0 extruder: target=210 temp=210.4 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65109.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55507131 bytes_read=8837333 bytes_retransmit=9 bytes_invalid=0 send_seq=1066665 receive_seq=1066665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13191 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117135 bytes_read=362686 bytes_retransmit=0 bytes_invalid=0 send_seq=19498 receive_seq=19498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997866 sd_pos=2070491 heater_bed: target=60 temp=60.0 pwm=0.038 sysload=0.31 cputime=5821.772 memavail=3264864 print_time=19144.037 buffer_time=2.461 print_stall=0 extruder: target=210 temp=210.4 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65110.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55516777 bytes_read=8838409 bytes_retransmit=9 bytes_invalid=0 send_seq=1066837 receive_seq=1066837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=17785 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117141 bytes_read=362715 bytes_retransmit=0 bytes_invalid=0 send_seq=19499 receive_seq=19499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997886 sd_pos=2075933 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.31 cputime=5821.949 memavail=3264864 print_time=19145.539 buffer_time=2.963 print_stall=0 extruder: target=210 temp=210.3 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65111.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55526635 bytes_read=8839482 bytes_retransmit=9 bytes_invalid=0 send_seq=1067008 receive_seq=1067008 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=15906 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117147 bytes_read=362731 bytes_retransmit=0 bytes_invalid=0 send_seq=19500 receive_seq=19500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997894 sd_pos=2078520 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.31 cputime=5822.025 memavail=3264864 print_time=19146.370 buffer_time=2.793 print_stall=0 extruder: target=210 temp=210.2 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65112.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55536999 bytes_read=8840608 bytes_retransmit=9 bytes_invalid=0 send_seq=1067190 receive_seq=1067190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15632 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117153 bytes_read=362747 bytes_retransmit=0 bytes_invalid=0 send_seq=19501 receive_seq=19501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998835 adj=49997882 sd_pos=2082254 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.31 cputime=5822.104 memavail=3264864 print_time=19147.306 buffer_time=2.729 print_stall=0 extruder: target=210 temp=210.1 pwm=0.355
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65113.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55546636 bytes_read=8841670 bytes_retransmit=9 bytes_invalid=0 send_seq=1067360 receive_seq=1067360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=10052 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117159 bytes_read=362763 bytes_retransmit=0 bytes_invalid=0 send_seq=19502 receive_seq=19502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998833 adj=49997883 sd_pos=2082971 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.36 cputime=5822.159 memavail=3264612 print_time=19147.700 buffer_time=2.123 print_stall=0 extruder: target=210 temp=209.9 pwm=0.424
Stats 65114.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55555756 bytes_read=8842667 bytes_retransmit=9 bytes_invalid=0 send_seq=1067519 receive_seq=1067519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=4404 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117165 bytes_read=362779 bytes_retransmit=0 bytes_invalid=0 send_seq=19503 receive_seq=19503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998832 adj=49997883 sd_pos=2084576 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.36 cputime=5822.221 memavail=3264612 print_time=19148.719 buffer_time=2.142 print_stall=0 extruder: target=210 temp=209.9 pwm=0.424
Stats 65115.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55563652 bytes_read=8843579 bytes_retransmit=9 bytes_invalid=0 send_seq=1067658 receive_seq=1067658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117171 bytes_read=362808 bytes_retransmit=0 bytes_invalid=0 send_seq=19504 receive_seq=19504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998832 adj=49997879 sd_pos=2086126 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.36 cputime=5822.275 memavail=3264620 print_time=19149.738 buffer_time=2.160 print_stall=0 extruder: target=210 temp=209.7 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65116.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55568517 bytes_read=8844286 bytes_retransmit=9 bytes_invalid=0 send_seq=1067753 receive_seq=1067753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117177 bytes_read=362824 bytes_retransmit=0 bytes_invalid=0 send_seq=19505 receive_seq=19505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998836 adj=49997888 sd_pos=2086989 heater_bed: target=60 temp=60.0 pwm=0.283 sysload=0.36 cputime=5822.437 memavail=3269452 print_time=19150.697 buffer_time=2.119 print_stall=0 extruder: target=210 temp=209.9 pwm=0.364
Stats 65117.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55572165 bytes_read=8844853 bytes_retransmit=9 bytes_invalid=0 send_seq=1067826 receive_seq=1067826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=316 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117183 bytes_read=362840 bytes_retransmit=0 bytes_invalid=0 send_seq=19506 receive_seq=19506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997934 sd_pos=2087090 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.36 cputime=5822.637 memavail=3267196 print_time=19151.733 buffer_time=2.154 print_stall=0 extruder: target=210 temp=210.1 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65118.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55577061 bytes_read=8845525 bytes_retransmit=9 bytes_invalid=0 send_seq=1067917 receive_seq=1067917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=154 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117189 bytes_read=362856 bytes_retransmit=0 bytes_invalid=0 send_seq=19507 receive_seq=19507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997943 sd_pos=2087479 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.34 cputime=5822.849 memavail=3266196 print_time=19152.667 buffer_time=2.087 print_stall=0 extruder: target=210 temp=210.3 pwm=0.314
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65119.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55580935 bytes_read=8846121 bytes_retransmit=9 bytes_invalid=0 send_seq=1067993 receive_seq=1067993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=8823 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117195 bytes_read=362872 bytes_retransmit=0 bytes_invalid=0 send_seq=19508 receive_seq=19508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998837 adj=49997891 sd_pos=2091370 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.34 cputime=5823.101 memavail=3265944 print_time=19154.554 buffer_time=2.964 print_stall=0 extruder: target=210 temp=210.5 pwm=0.314
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65120.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55586008 bytes_read=8846798 bytes_retransmit=9 bytes_invalid=0 send_seq=1068088 receive_seq=1068088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=10759 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117201 bytes_read=362901 bytes_retransmit=0 bytes_invalid=0 send_seq=19509 receive_seq=19509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998839 adj=49997890 sd_pos=2093758 heater_bed: target=60 temp=60.0 pwm=0.007 sysload=0.34 cputime=5823.162 memavail=3264180 print_time=19155.289 buffer_time=2.698 print_stall=0 extruder: target=210 temp=210.6 pwm=0.314
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65121.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55591419 bytes_read=8847496 bytes_retransmit=9 bytes_invalid=0 send_seq=1068181 receive_seq=1068181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=15092 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117207 bytes_read=362917 bytes_retransmit=0 bytes_invalid=0 send_seq=19510 receive_seq=19510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998838 adj=49997901 sd_pos=2097505 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.34 cputime=5823.239 memavail=3264180 print_time=19156.251 buffer_time=2.659 print_stall=0 extruder: target=210 temp=210.6 pwm=0.314
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65122.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55601165 bytes_read=8848567 bytes_retransmit=9 bytes_invalid=0 send_seq=1068352 receive_seq=1068352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=13541 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117213 bytes_read=362932 bytes_retransmit=0 bytes_invalid=0 send_seq=19511 receive_seq=19511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998844 adj=49997907 sd_pos=2101097 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.34 cputime=5823.377 memavail=3264188 print_time=19157.113 buffer_time=2.521 print_stall=0 extruder: target=210 temp=210.4 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65123.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55610460 bytes_read=8849596 bytes_retransmit=9 bytes_invalid=0 send_seq=1068516 receive_seq=1068516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=13950 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117225 bytes_read=362962 bytes_retransmit=0 bytes_invalid=0 send_seq=19513 receive_seq=19513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998848 adj=49997903 sd_pos=2103879 heater_bed: target=60 temp=60.0 pwm=0.208 sysload=0.31 cputime=5823.509 memavail=3264188 print_time=19157.987 buffer_time=2.394 print_stall=0 extruder: target=210 temp=210.2 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65124.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55621120 bytes_read=8850746 bytes_retransmit=9 bytes_invalid=0 send_seq=1068703 receive_seq=1068703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=10545 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117231 bytes_read=362977 bytes_retransmit=0 bytes_invalid=0 send_seq=19514 receive_seq=19514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998848 adj=49997924 sd_pos=2106604 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.31 cputime=5823.584 memavail=3264188 print_time=19158.761 buffer_time=2.167 print_stall=0 extruder: target=210 temp=209.9 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65125.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55631769 bytes_read=8851857 bytes_retransmit=9 bytes_invalid=0 send_seq=1068882 receive_seq=1068882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=9268 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=117237 bytes_read=363005 bytes_retransmit=0 bytes_invalid=0 send_seq=19515 receive_seq=19515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997945 sd_pos=2109033 heater_bed: target=60 temp=60.0 pwm=0.041 sysload=0.31 cputime=5823.663 memavail=3264188 print_time=19159.739 buffer_time=2.144 print_stall=0 extruder: target=210 temp=209.7 pwm=0.440
Stats 65126.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55640871 bytes_read=8852835 bytes_retransmit=9 bytes_invalid=0 send_seq=1069034 receive_seq=1069034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3712 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=117243 bytes_read=363020 bytes_retransmit=0 bytes_invalid=0 send_seq=19516 receive_seq=19516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998845 adj=49997926 sd_pos=2110635 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.31 cputime=5823.722 memavail=3264188 print_time=19160.753 buffer_time=2.159 print_stall=0 extruder: target=210 temp=209.6 pwm=0.440
Stats 65127.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55647860 bytes_read=8853647 bytes_retransmit=9 bytes_invalid=0 send_seq=1069153 receive_seq=1069153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=117249 bytes_read=363036 bytes_retransmit=0 bytes_invalid=0 send_seq=19517 receive_seq=19517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998844 adj=49997908 sd_pos=2112177 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.31 cputime=5823.770 memavail=3263948 print_time=19161.768 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.6 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65128.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55652393 bytes_read=8854298 bytes_retransmit=9 bytes_invalid=0 send_seq=1069240 receive_seq=1069240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=117255 bytes_read=363052 bytes_retransmit=0 bytes_invalid=0 send_seq=19518 receive_seq=19518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998845 adj=49997892 sd_pos=2112933 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.36 cputime=5823.913 memavail=3265716 print_time=19162.723 buffer_time=2.127 print_stall=0 extruder: target=210 temp=209.7 pwm=0.389
Stats 65129.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55655954 bytes_read=8854860 bytes_retransmit=9 bytes_invalid=0 send_seq=1069312 receive_seq=1069312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=117261 bytes_read=363068 bytes_retransmit=0 bytes_invalid=0 send_seq=19519 receive_seq=19519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997856 sd_pos=2113023 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.36 cputime=5824.104 memavail=3264960 print_time=19163.723 buffer_time=2.127 print_stall=0 extruder: target=210 temp=209.9 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65130.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55661040 bytes_read=8855576 bytes_retransmit=9 bytes_invalid=0 send_seq=1069409 receive_seq=1069409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=985 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117267 bytes_read=363097 bytes_retransmit=0 bytes_invalid=0 send_seq=19520 receive_seq=19520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997876 sd_pos=2113446 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.36 cputime=5824.392 memavail=3264960 print_time=19164.924 buffer_time=2.253 print_stall=0 extruder: target=210 temp=210.2 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65131.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55664690 bytes_read=8856159 bytes_retransmit=9 bytes_invalid=0 send_seq=1069482 receive_seq=1069482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=4022 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117273 bytes_read=363113 bytes_retransmit=0 bytes_invalid=0 send_seq=19521 receive_seq=19521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997871 sd_pos=2115807 heater_bed: target=60 temp=60.0 pwm=0.291 sysload=0.36 cputime=5824.533 memavail=3264960 print_time=19165.859 buffer_time=2.187 print_stall=0 extruder: target=210 temp=210.4 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65132.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55669868 bytes_read=8856831 bytes_retransmit=9 bytes_invalid=0 send_seq=1069573 receive_seq=1069573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7554 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117279 bytes_read=363129 bytes_retransmit=0 bytes_invalid=0 send_seq=19522 receive_seq=19522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998845 adj=49997875 sd_pos=2118820 heater_bed: target=60 temp=60.0 pwm=0.002 sysload=0.36 cputime=5824.600 memavail=3264960 print_time=19166.729 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.5 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65133.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55677270 bytes_read=8857662 bytes_retransmit=9 bytes_invalid=0 send_seq=1069696 receive_seq=1069696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=16607 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117285 bytes_read=363145 bytes_retransmit=0 bytes_invalid=0 send_seq=19523 receive_seq=19523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998848 adj=49997882 sd_pos=2126083 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.33 cputime=5824.733 memavail=3264960 print_time=19168.574 buffer_time=2.882 print_stall=0 extruder: target=210 temp=210.4 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65134.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55687571 bytes_read=8858763 bytes_retransmit=9 bytes_invalid=0 send_seq=1069877 receive_seq=1069877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=16416 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117291 bytes_read=363161 bytes_retransmit=0 bytes_invalid=0 send_seq=19524 receive_seq=19524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998847 adj=49997915 sd_pos=2129695 heater_bed: target=60 temp=60.0 pwm=0.054 sysload=0.33 cputime=5824.816 memavail=3264736 print_time=19169.585 buffer_time=2.892 print_stall=0 extruder: target=210 temp=210.3 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65135.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55696644 bytes_read=8859790 bytes_retransmit=9 bytes_invalid=0 send_seq=1070039 receive_seq=1070039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=13856 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117297 bytes_read=363177 bytes_retransmit=0 bytes_invalid=0 send_seq=19525 receive_seq=19525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997904 sd_pos=2132073 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.33 cputime=5824.882 memavail=3264736 print_time=19170.281 buffer_time=2.587 print_stall=0 extruder: target=210 temp=210.1 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65136.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55706649 bytes_read=8860907 bytes_retransmit=9 bytes_invalid=0 send_seq=1070216 receive_seq=1070216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=12476 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117303 bytes_read=363206 bytes_retransmit=0 bytes_invalid=0 send_seq=19526 receive_seq=19526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997902 sd_pos=2134958 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.33 cputime=5824.960 memavail=3264736 print_time=19171.096 buffer_time=2.401 print_stall=0 extruder: target=210 temp=209.9 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65137.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55716465 bytes_read=8861924 bytes_retransmit=9 bytes_invalid=0 send_seq=1070379 receive_seq=1070379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=7153 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117309 bytes_read=363222 bytes_retransmit=0 bytes_invalid=0 send_seq=19527 receive_seq=19527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998846 adj=49997928 sd_pos=2135831 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.33 cputime=5825.022 memavail=3264736 print_time=19171.782 buffer_time=2.086 print_stall=0 extruder: target=210 temp=209.6 pwm=0.388
Stats 65138.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55725473 bytes_read=8862941 bytes_retransmit=9 bytes_invalid=0 send_seq=1070539 receive_seq=1070539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1768 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117315 bytes_read=363238 bytes_retransmit=0 bytes_invalid=0 send_seq=19528 receive_seq=19528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998849 adj=49997942 sd_pos=2137387 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.31 cputime=5825.086 memavail=3265004 print_time=19172.794 buffer_time=2.098 print_stall=0 extruder: target=210 temp=209.6 pwm=0.388
Stats 65139.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55730426 bytes_read=8863627 bytes_retransmit=9 bytes_invalid=0 send_seq=1070633 receive_seq=1070633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117321 bytes_read=363254 bytes_retransmit=0 bytes_invalid=0 send_seq=19529 receive_seq=19529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998853 adj=49997923 sd_pos=2138987 heater_bed: target=60 temp=60.0 pwm=0.348 sysload=0.31 cputime=5825.174 memavail=3265004 print_time=19173.805 buffer_time=2.108 print_stall=0 extruder: target=210 temp=209.5 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65140.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55735534 bytes_read=8864314 bytes_retransmit=9 bytes_invalid=0 send_seq=1070730 receive_seq=1070730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117327 bytes_read=363270 bytes_retransmit=0 bytes_invalid=0 send_seq=19530 receive_seq=19530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998853 adj=49997986 sd_pos=2139356 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.31 cputime=5825.381 memavail=3265004 print_time=19174.744 buffer_time=2.046 print_stall=0 extruder: target=210 temp=209.6 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65141.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55739064 bytes_read=8864902 bytes_retransmit=9 bytes_invalid=0 send_seq=1070801 receive_seq=1070801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=791 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117333 bytes_read=363299 bytes_retransmit=0 bytes_invalid=0 send_seq=19531 receive_seq=19531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998854 adj=49997959 sd_pos=2139603 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.31 cputime=5825.591 memavail=3265004 print_time=19175.914 buffer_time=2.216 print_stall=0 extruder: target=210 temp=209.7 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65142.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55744350 bytes_read=8865613 bytes_retransmit=9 bytes_invalid=0 send_seq=1070900 receive_seq=1070900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=419 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117339 bytes_read=363315 bytes_retransmit=0 bytes_invalid=0 send_seq=19532 receive_seq=19532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998854 adj=49997969 sd_pos=2139893 heater_bed: target=60 temp=60.0 pwm=0.266 sysload=0.31 cputime=5825.810 memavail=3263996 print_time=19176.707 buffer_time=2.008 print_stall=0 extruder: target=210 temp=210.0 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65143.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55748092 bytes_read=8866140 bytes_retransmit=9 bytes_invalid=0 send_seq=1070965 receive_seq=1070965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=7811 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117345 bytes_read=363331 bytes_retransmit=0 bytes_invalid=0 send_seq=19533 receive_seq=19533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998856 adj=49997953 sd_pos=2143445 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.28 cputime=5825.988 memavail=3263996 print_time=19178.281 buffer_time=2.581 print_stall=0 extruder: target=210 temp=210.1 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65144.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55753922 bytes_read=8866896 bytes_retransmit=9 bytes_invalid=0 send_seq=1071073 receive_seq=1071073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=9892 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117351 bytes_read=363347 bytes_retransmit=0 bytes_invalid=0 send_seq=19534 receive_seq=19534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998857 adj=49997936 sd_pos=2146073 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.28 cputime=5826.054 memavail=3263240 print_time=19179.136 buffer_time=2.435 print_stall=0 extruder: target=210 temp=210.2 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65145.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55761075 bytes_read=8867738 bytes_retransmit=9 bytes_invalid=0 send_seq=1071199 receive_seq=1071199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=12779 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=117357 bytes_read=363363 bytes_retransmit=0 bytes_invalid=0 send_seq=19535 receive_seq=19535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998856 adj=49997929 sd_pos=2149733 heater_bed: target=60 temp=60.0 pwm=0.054 sysload=0.28 cputime=5826.140 memavail=3267104 print_time=19180.114 buffer_time=2.413 print_stall=0 extruder: target=210 temp=210.3 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65146.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55770964 bytes_read=8868826 bytes_retransmit=9 bytes_invalid=0 send_seq=1071373 receive_seq=1071373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=15204 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117363 bytes_read=363392 bytes_retransmit=0 bytes_invalid=0 send_seq=19536 receive_seq=19536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998858 adj=49997932 sd_pos=2154571 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.28 cputime=5826.318 memavail=3266888 print_time=19181.481 buffer_time=2.779 print_stall=0 extruder: target=210 temp=210.2 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65147.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55780265 bytes_read=8869868 bytes_retransmit=9 bytes_invalid=0 send_seq=1071538 receive_seq=1071538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14521 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117369 bytes_read=363408 bytes_retransmit=0 bytes_invalid=0 send_seq=19537 receive_seq=19537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998857 adj=49997939 sd_pos=2157501 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.28 cputime=5826.395 memavail=3266888 print_time=19182.327 buffer_time=2.624 print_stall=0 extruder: target=210 temp=210.1 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65148.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55790011 bytes_read=8870944 bytes_retransmit=9 bytes_invalid=0 send_seq=1071710 receive_seq=1071710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=14395 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117375 bytes_read=363424 bytes_retransmit=0 bytes_invalid=0 send_seq=19538 receive_seq=19538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998856 adj=49997887 sd_pos=2160815 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.26 cputime=5826.480 memavail=3265408 print_time=19183.259 buffer_time=2.556 print_stall=0 extruder: target=210 temp=210.0 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65149.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55800016 bytes_read=8872031 bytes_retransmit=9 bytes_invalid=0 send_seq=1071887 receive_seq=1071887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=8751 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117381 bytes_read=363440 bytes_retransmit=0 bytes_invalid=0 send_seq=19539 receive_seq=19539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998855 adj=49997887 sd_pos=2161974 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.26 cputime=5826.537 memavail=3265408 print_time=19183.868 buffer_time=2.165 print_stall=0 extruder: target=210 temp=209.9 pwm=0.397
Stats 65150.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=55809563 bytes_read=8873088 bytes_retransmit=9 bytes_invalid=0 send_seq=1072055 receive_seq=1072055 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2998 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117387 bytes_read=363456 bytes_retransmit=0 bytes_invalid=0 send_seq=19540 receive_seq=19540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998855 adj=49997897 sd_pos=2163880 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.26 cputime=5826.602 memavail=3265168 print_time=19184.879 buffer_time=2.174 print_stall=0 extruder: target=210 temp=209.8 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65151.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55816993 bytes_read=8873935 bytes_retransmit=9 bytes_invalid=0 send_seq=1072190 receive_seq=1072178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=974 upcoming_bytes=613 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117393 bytes_read=363485 bytes_retransmit=0 bytes_invalid=0 send_seq=19541 receive_seq=19541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998856 adj=49997846 sd_pos=2165454 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.26 cputime=5826.699 memavail=3265168 print_time=19186.086 buffer_time=2.372 print_stall=0 extruder: target=210 temp=209.9 pwm=0.397
Stats 65152.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55821372 bytes_read=8874622 bytes_retransmit=9 bytes_invalid=0 send_seq=1072275 receive_seq=1072275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=437 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117399 bytes_read=363501 bytes_retransmit=0 bytes_invalid=0 send_seq=19542 receive_seq=19542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998855 adj=49997865 sd_pos=2165554 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.26 cputime=5826.895 memavail=3265924 print_time=19186.865 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.0 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65153.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55825600 bytes_read=8875249 bytes_retransmit=9 bytes_invalid=0 send_seq=1072357 receive_seq=1072357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=78 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117405 bytes_read=363517 bytes_retransmit=0 bytes_invalid=0 send_seq=19543 receive_seq=19543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998855 adj=49997882 sd_pos=2165843 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.32 cputime=5827.078 memavail=3265924 print_time=19187.737 buffer_time=2.021 print_stall=0 extruder: target=210 temp=210.1 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65154.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55830323 bytes_read=8875910 bytes_retransmit=9 bytes_invalid=0 send_seq=1072446 receive_seq=1072446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1506 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117411 bytes_read=363533 bytes_retransmit=0 bytes_invalid=0 send_seq=19544 receive_seq=19544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998856 adj=49997898 sd_pos=2166192 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.32 cputime=5827.372 memavail=3265924 print_time=19188.918 buffer_time=2.202 print_stall=0 extruder: target=210 temp=210.2 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65155.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55834671 bytes_read=8876515 bytes_retransmit=9 bytes_invalid=0 send_seq=1072527 receive_seq=1072527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=6127 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117417 bytes_read=363549 bytes_retransmit=0 bytes_invalid=0 send_seq=19545 receive_seq=19545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998857 adj=49997929 sd_pos=2169606 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.32 cputime=5827.441 memavail=3265924 print_time=19189.922 buffer_time=2.206 print_stall=0 extruder: target=210 temp=210.3 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65156.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55840268 bytes_read=8877270 bytes_retransmit=9 bytes_invalid=0 send_seq=1072632 receive_seq=1072632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=7909 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117423 bytes_read=363578 bytes_retransmit=0 bytes_invalid=0 send_seq=19546 receive_seq=19546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998858 adj=49997939 sd_pos=2172062 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.32 cputime=5827.505 memavail=3265924 print_time=19190.717 buffer_time=1.999 print_stall=0 extruder: target=210 temp=210.4 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65157.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55849014 bytes_read=8878261 bytes_retransmit=9 bytes_invalid=0 send_seq=1072787 receive_seq=1072787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=15284 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117429 bytes_read=363594 bytes_retransmit=0 bytes_invalid=0 send_seq=19547 receive_seq=19547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998857 adj=49997895 sd_pos=2179160 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.32 cputime=5827.654 memavail=3265924 print_time=19192.401 buffer_time=2.683 print_stall=0 extruder: target=210 temp=210.2 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65158.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55858670 bytes_read=8879323 bytes_retransmit=9 bytes_invalid=0 send_seq=1072959 receive_seq=1072959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=15079 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117435 bytes_read=363610 bytes_retransmit=0 bytes_invalid=0 send_seq=19548 receive_seq=19548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998862 adj=49997865 sd_pos=2181938 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.53 cputime=5827.793 memavail=3265684 print_time=19193.321 buffer_time=2.603 print_stall=0 extruder: target=210 temp=210.1 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65159.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55869229 bytes_read=8880465 bytes_retransmit=9 bytes_invalid=0 send_seq=1073144 receive_seq=1073144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=13931 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117441 bytes_read=363626 bytes_retransmit=0 bytes_invalid=0 send_seq=19549 receive_seq=19549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998862 adj=49997929 sd_pos=2185377 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.53 cputime=5827.873 memavail=3265684 print_time=19194.296 buffer_time=2.577 print_stall=0 extruder: target=210 temp=209.8 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65160.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55878779 bytes_read=8881531 bytes_retransmit=9 bytes_invalid=0 send_seq=1073314 receive_seq=1073314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=11659 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117447 bytes_read=363642 bytes_retransmit=0 bytes_invalid=0 send_seq=19550 receive_seq=19550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998861 adj=49997906 sd_pos=2187266 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.53 cputime=5827.949 memavail=3265440 print_time=19195.025 buffer_time=2.305 print_stall=0 extruder: target=210 temp=209.6 pwm=0.419
Stats 65161.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55888706 bytes_read=8882604 bytes_retransmit=9 bytes_invalid=0 send_seq=1073485 receive_seq=1073485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=5562 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117453 bytes_read=363671 bytes_retransmit=0 bytes_invalid=0 send_seq=19551 receive_seq=19551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998860 adj=49997923 sd_pos=2188718 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.53 cputime=5828.009 memavail=3265440 print_time=19195.783 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.4 pwm=0.419
Stats 65162.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55898104 bytes_read=8883646 bytes_retransmit=9 bytes_invalid=0 send_seq=1073650 receive_seq=1073650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117459 bytes_read=363687 bytes_retransmit=0 bytes_invalid=0 send_seq=19552 receive_seq=19552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998859 adj=49997929 sd_pos=2190731 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.53 cputime=5828.072 memavail=3265440 print_time=19196.789 buffer_time=2.068 print_stall=0 extruder: target=210 temp=209.4 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65163.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55902641 bytes_read=8884307 bytes_retransmit=9 bytes_invalid=0 send_seq=1073739 receive_seq=1073739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117465 bytes_read=363703 bytes_retransmit=0 bytes_invalid=0 send_seq=19553 receive_seq=19553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998863 adj=49997929 sd_pos=2191709 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.57 cputime=5828.171 memavail=3265440 print_time=19197.728 buffer_time=2.006 print_stall=0 extruder: target=210 temp=209.5 pwm=0.397
Stats 65164.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55906327 bytes_read=8884884 bytes_retransmit=9 bytes_invalid=0 send_seq=1073814 receive_seq=1073814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117471 bytes_read=363719 bytes_retransmit=0 bytes_invalid=0 send_seq=19554 receive_seq=19554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998866 adj=49997994 sd_pos=2191796 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.57 cputime=5828.528 memavail=3265440 print_time=19198.728 buffer_time=2.005 print_stall=0 extruder: target=210 temp=209.6 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65165.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55911564 bytes_read=8885610 bytes_retransmit=9 bytes_invalid=0 send_seq=1073913 receive_seq=1073913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=973 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117477 bytes_read=363735 bytes_retransmit=0 bytes_invalid=0 send_seq=19555 receive_seq=19555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998867 adj=49998035 sd_pos=2192228 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.57 cputime=5828.811 memavail=3265440 print_time=19199.918 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.0 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65166.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55915140 bytes_read=8886119 bytes_retransmit=9 bytes_invalid=0 send_seq=1073972 receive_seq=1073972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=8272 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117483 bytes_read=363764 bytes_retransmit=0 bytes_invalid=0 send_seq=19556 receive_seq=19556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998866 adj=49998017 sd_pos=2195979 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.57 cputime=5828.967 memavail=3265440 print_time=19201.473 buffer_time=2.744 print_stall=0 extruder: target=210 temp=210.2 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65167.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55920720 bytes_read=8886796 bytes_retransmit=9 bytes_invalid=0 send_seq=1074067 receive_seq=1074067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=10996 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117489 bytes_read=363780 bytes_retransmit=0 bytes_invalid=0 send_seq=19557 receive_seq=19557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998865 adj=49997963 sd_pos=2198596 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.57 cputime=5829.033 memavail=3264436 print_time=19202.335 buffer_time=2.605 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65168.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55927441 bytes_read=8887642 bytes_retransmit=9 bytes_invalid=0 send_seq=1074190 receive_seq=1074190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=12341 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117495 bytes_read=363796 bytes_retransmit=0 bytes_invalid=0 send_seq=19558 receive_seq=19558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998864 adj=49997915 sd_pos=2202090 heater_bed: target=60 temp=60.0 pwm=0.276 sysload=0.53 cputime=5829.102 memavail=3268916 print_time=19203.205 buffer_time=2.474 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65169.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55937091 bytes_read=8888699 bytes_retransmit=9 bytes_invalid=0 send_seq=1074361 receive_seq=1074361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=12056 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117501 bytes_read=363812 bytes_retransmit=0 bytes_invalid=0 send_seq=19559 receive_seq=19559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998863 adj=49997892 sd_pos=2205795 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.53 cputime=5829.184 memavail=3268916 print_time=19204.102 buffer_time=2.371 print_stall=0 extruder: target=210 temp=210.2 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65170.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=55946191 bytes_read=8889686 bytes_retransmit=9 bytes_invalid=0 send_seq=1074518 receive_seq=1074518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=12390 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117507 bytes_read=363828 bytes_retransmit=0 bytes_invalid=0 send_seq=19560 receive_seq=19560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997910 sd_pos=2208934 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.53 cputime=5829.310 memavail=3268944 print_time=19205.053 buffer_time=2.320 print_stall=0 extruder: target=210 temp=210.1 pwm=0.349
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65171.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55956425 bytes_read=8890828 bytes_retransmit=9 bytes_invalid=0 send_seq=1074697 receive_seq=1074697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=9586 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117513 bytes_read=363857 bytes_retransmit=0 bytes_invalid=0 send_seq=19561 receive_seq=19561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997960 sd_pos=2211825 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.53 cputime=5829.384 memavail=3268944 print_time=19205.882 buffer_time=2.148 print_stall=0 extruder: target=210 temp=209.9 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65172.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55966054 bytes_read=8891875 bytes_retransmit=9 bytes_invalid=0 send_seq=1074866 receive_seq=1074866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=10934 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117519 bytes_read=363873 bytes_retransmit=0 bytes_invalid=0 send_seq=19562 receive_seq=19562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49998183 sd_pos=2214881 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.53 cputime=5829.468 memavail=3268944 print_time=19207.045 buffer_time=2.311 print_stall=0 extruder: target=210 temp=209.8 pwm=0.402
Stats 65173.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55975488 bytes_read=8892917 bytes_retransmit=9 bytes_invalid=0 send_seq=1075034 receive_seq=1075034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=4645 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117525 bytes_read=363889 bytes_retransmit=0 bytes_invalid=0 send_seq=19563 receive_seq=19563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998883 adj=49998089 sd_pos=2216552 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.48 cputime=5829.529 memavail=3268704 print_time=19207.831 buffer_time=2.096 print_stall=0 extruder: target=210 temp=209.8 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65174.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55984416 bytes_read=8893928 bytes_retransmit=9 bytes_invalid=0 send_seq=1075190 receive_seq=1075190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117531 bytes_read=363905 bytes_retransmit=0 bytes_invalid=0 send_seq=19564 receive_seq=19564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998881 adj=49998080 sd_pos=2218845 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.48 cputime=5829.593 memavail=3268452 print_time=19208.981 buffer_time=2.245 print_stall=0 extruder: target=210 temp=209.7 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65175.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=55988977 bytes_read=8894570 bytes_retransmit=9 bytes_invalid=0 send_seq=1075278 receive_seq=1075278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117537 bytes_read=363921 bytes_retransmit=0 bytes_invalid=0 send_seq=19565 receive_seq=19565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49998017 sd_pos=2219062 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.48 cputime=5829.771 memavail=3267696 print_time=19209.824 buffer_time=2.087 print_stall=0 extruder: target=210 temp=209.9 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65176.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55992587 bytes_read=8895148 bytes_retransmit=9 bytes_invalid=0 send_seq=1075350 receive_seq=1075350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=318 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=117543 bytes_read=363950 bytes_retransmit=0 bytes_invalid=0 send_seq=19566 receive_seq=19566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998877 adj=49998007 sd_pos=2219439 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.48 cputime=5829.984 memavail=3267696 print_time=19210.888 buffer_time=2.151 print_stall=0 extruder: target=210 temp=210.0 pwm=0.347
Stats 65177.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=55997632 bytes_read=8895849 bytes_retransmit=9 bytes_invalid=0 send_seq=1075445 receive_seq=1075445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=400 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=117549 bytes_read=363966 bytes_retransmit=0 bytes_invalid=0 send_seq=19567 receive_seq=19567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998878 adj=49997964 sd_pos=2219582 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.48 cputime=5830.198 memavail=3267696 print_time=19211.770 buffer_time=2.032 print_stall=0 extruder: target=210 temp=210.2 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65178.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56001420 bytes_read=8896421 bytes_retransmit=9 bytes_invalid=0 send_seq=1075519 receive_seq=1075519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=9638 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=117555 bytes_read=363982 bytes_retransmit=0 bytes_invalid=0 send_seq=19568 receive_seq=19568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998876 adj=49997970 sd_pos=2223793 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.44 cputime=5830.356 memavail=3266700 print_time=19213.451 buffer_time=2.713 print_stall=0 extruder: target=210 temp=210.3 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65179.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56007141 bytes_read=8897158 bytes_retransmit=9 bytes_invalid=0 send_seq=1075626 receive_seq=1075626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=11080 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=117561 bytes_read=363998 bytes_retransmit=0 bytes_invalid=0 send_seq=19569 receive_seq=19569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998875 adj=49997938 sd_pos=2226404 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.44 cputime=5830.420 memavail=3266196 print_time=19214.230 buffer_time=2.491 print_stall=0 extruder: target=210 temp=210.3 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65180.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56014932 bytes_read=8898094 bytes_retransmit=9 bytes_invalid=0 send_seq=1075767 receive_seq=1075767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=12544 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=117567 bytes_read=364014 bytes_retransmit=0 bytes_invalid=0 send_seq=19570 receive_seq=19570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998874 adj=49997925 sd_pos=2229777 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.44 cputime=5830.509 memavail=3266196 print_time=19215.137 buffer_time=2.398 print_stall=0 extruder: target=210 temp=210.3 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65181.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56024992 bytes_read=8899202 bytes_retransmit=9 bytes_invalid=0 send_seq=1075945 receive_seq=1075945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16362 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117573 bytes_read=364043 bytes_retransmit=0 bytes_invalid=0 send_seq=19571 receive_seq=19571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998877 adj=49997930 sd_pos=2234898 heater_bed: target=60 temp=60.0 pwm=0.280 sysload=0.44 cputime=5830.703 memavail=3266196 print_time=19216.642 buffer_time=2.890 print_stall=0 extruder: target=210 temp=210.2 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65182.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56034159 bytes_read=8900234 bytes_retransmit=9 bytes_invalid=0 send_seq=1076108 receive_seq=1076108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=14790 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117579 bytes_read=364059 bytes_retransmit=0 bytes_invalid=0 send_seq=19572 receive_seq=19572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998875 adj=49997938 sd_pos=2237233 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.44 cputime=5830.784 memavail=3266196 print_time=19217.453 buffer_time=2.700 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65183.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56043961 bytes_read=8901305 bytes_retransmit=9 bytes_invalid=0 send_seq=1076279 receive_seq=1076279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=14640 freq=400007860 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117585 bytes_read=364075 bytes_retransmit=0 bytes_invalid=0 send_seq=19573 receive_seq=19573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998873 adj=49997776 sd_pos=2240797 heater_bed: target=60 temp=60.0 pwm=0.219 sysload=0.41 cputime=5830.861 memavail=3266196 print_time=19218.388 buffer_time=2.634 print_stall=0 extruder: target=210 temp=209.9 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65184.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56054010 bytes_read=8902392 bytes_retransmit=9 bytes_invalid=0 send_seq=1076456 receive_seq=1076456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=10027 freq=400007835 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117591 bytes_read=364091 bytes_retransmit=0 bytes_invalid=0 send_seq=19574 receive_seq=19574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998872 adj=49997637 sd_pos=2242228 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.41 cputime=5830.925 memavail=3266196 print_time=19218.853 buffer_time=2.099 print_stall=0 extruder: target=210 temp=209.8 pwm=0.398
Stats 65185.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56062963 bytes_read=8903379 bytes_retransmit=9 bytes_invalid=0 send_seq=1076610 receive_seq=1076610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=6067 freq=400007821 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117597 bytes_read=364107 bytes_retransmit=0 bytes_invalid=0 send_seq=19575 receive_seq=19575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998871 adj=49997658 sd_pos=2244886 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.41 cputime=5830.996 memavail=3266196 print_time=19219.987 buffer_time=2.231 print_stall=0 extruder: target=210 temp=209.8 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65186.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56073410 bytes_read=8904526 bytes_retransmit=9 bytes_invalid=0 send_seq=1076793 receive_seq=1076793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1137 freq=400007835 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117603 bytes_read=364136 bytes_retransmit=0 bytes_invalid=0 send_seq=19576 receive_seq=19576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998870 adj=49997684 sd_pos=2246586 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.41 cputime=5831.093 memavail=3266196 print_time=19220.983 buffer_time=2.227 print_stall=0 extruder: target=210 temp=209.9 pwm=0.357
Stats 65187.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56077599 bytes_read=8905086 bytes_retransmit=9 bytes_invalid=0 send_seq=1076865 receive_seq=1076865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=0 freq=400007824 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117609 bytes_read=364152 bytes_retransmit=0 bytes_invalid=0 send_seq=19577 receive_seq=19577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998873 adj=49997688 sd_pos=2246586 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.41 cputime=5831.357 memavail=3264444 print_time=19221.764 buffer_time=2.007 print_stall=0 extruder: target=210 temp=210.1 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65188.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56082271 bytes_read=8905745 bytes_retransmit=9 bytes_invalid=0 send_seq=1076954 receive_seq=1076954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=364 freq=400007817 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117615 bytes_read=364168 bytes_retransmit=0 bytes_invalid=0 send_seq=19578 receive_seq=19578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998874 adj=49997755 sd_pos=2246875 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.46 cputime=5831.596 memavail=3264200 print_time=19222.885 buffer_time=2.128 print_stall=0 extruder: target=210 temp=210.3 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65189.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56086481 bytes_read=8906366 bytes_retransmit=9 bytes_invalid=0 send_seq=1077035 receive_seq=1077035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=5805 freq=400007961 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117621 bytes_read=364184 bytes_retransmit=0 bytes_invalid=0 send_seq=19579 receive_seq=19579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998873 adj=49997818 sd_pos=2248907 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.46 cputime=5831.841 memavail=3264200 print_time=19224.373 buffer_time=2.615 print_stall=0 extruder: target=210 temp=210.4 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65190.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56091077 bytes_read=8907008 bytes_retransmit=9 bytes_invalid=0 send_seq=1077123 receive_seq=1077123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=11086 freq=400007925 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117627 bytes_read=364200 bytes_retransmit=0 bytes_invalid=0 send_seq=19580 receive_seq=19580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998872 adj=49997652 sd_pos=2252432 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.46 cputime=5831.912 memavail=3264200 print_time=19225.416 buffer_time=2.657 print_stall=0 extruder: target=210 temp=210.5 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65191.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56096809 bytes_read=8907787 bytes_retransmit=9 bytes_invalid=0 send_seq=1077230 receive_seq=1077230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=11352 freq=400007893 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117639 bytes_read=364245 bytes_retransmit=0 bytes_invalid=0 send_seq=19582 receive_seq=19582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998872 adj=49997726 sd_pos=2254501 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.46 cputime=5831.971 memavail=3264200 print_time=19226.101 buffer_time=2.342 print_stall=0 extruder: target=210 temp=210.4 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65192.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56106508 bytes_read=8908858 bytes_retransmit=9 bytes_invalid=0 send_seq=1077401 receive_seq=1077401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12682 freq=400007878 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117645 bytes_read=364261 bytes_retransmit=0 bytes_invalid=0 send_seq=19583 receive_seq=19583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998875 adj=49997780 sd_pos=2258487 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=0.46 cputime=5832.063 memavail=3264204 print_time=19227.156 buffer_time=2.397 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65193.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56115824 bytes_read=8909880 bytes_retransmit=9 bytes_invalid=0 send_seq=1077565 receive_seq=1077565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=12369 freq=400007990 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117651 bytes_read=364277 bytes_retransmit=0 bytes_invalid=0 send_seq=19584 receive_seq=19584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998873 adj=49997852 sd_pos=2261779 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.42 cputime=5832.189 memavail=3264204 print_time=19228.087 buffer_time=2.327 print_stall=0 extruder: target=210 temp=209.9 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65194.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56126171 bytes_read=8910962 bytes_retransmit=9 bytes_invalid=0 send_seq=1077738 receive_seq=1077738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11177 freq=400007963 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117657 bytes_read=364293 bytes_retransmit=0 bytes_invalid=0 send_seq=19585 receive_seq=19585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998872 adj=49997673 sd_pos=2264195 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.42 cputime=5832.267 memavail=3264204 print_time=19228.982 buffer_time=2.222 print_stall=0 extruder: target=210 temp=209.8 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65195.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56135493 bytes_read=8911998 bytes_retransmit=9 bytes_invalid=0 send_seq=1077902 receive_seq=1077902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=9988 freq=400007939 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117663 bytes_read=364309 bytes_retransmit=0 bytes_invalid=0 send_seq=19586 receive_seq=19586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998871 adj=49997718 sd_pos=2267304 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.42 cputime=5832.339 memavail=3264208 print_time=19229.845 buffer_time=2.084 print_stall=0 extruder: target=210 temp=209.5 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65196.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56146397 bytes_read=8913156 bytes_retransmit=9 bytes_invalid=0 send_seq=1078090 receive_seq=1078090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=8497 freq=400007909 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117669 bytes_read=364338 bytes_retransmit=0 bytes_invalid=0 send_seq=19587 receive_seq=19587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998870 adj=49997766 sd_pos=2269809 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.42 cputime=5832.421 memavail=3264208 print_time=19230.849 buffer_time=2.087 print_stall=0 extruder: target=210 temp=209.3 pwm=0.434
Stats 65197.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56155329 bytes_read=8914123 bytes_retransmit=9 bytes_invalid=0 send_seq=1078240 receive_seq=1078240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=3543 freq=400007883 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117675 bytes_read=364354 bytes_retransmit=0 bytes_invalid=0 send_seq=19588 receive_seq=19588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997820 sd_pos=2272389 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.42 cputime=5832.488 memavail=3264208 print_time=19231.889 buffer_time=2.128 print_stall=0 extruder: target=210 temp=209.4 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65198.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56164288 bytes_read=8915129 bytes_retransmit=9 bytes_invalid=0 send_seq=1078399 receive_seq=1078399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=21 freq=400007855 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117681 bytes_read=364370 bytes_retransmit=0 bytes_invalid=0 send_seq=19589 receive_seq=19589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997866 sd_pos=2273616 heater_bed: target=60 temp=60.0 pwm=0.249 sysload=0.39 cputime=5832.638 memavail=3263712 print_time=19232.872 buffer_time=2.110 print_stall=0 extruder: target=210 temp=209.7 pwm=0.372
Stats 65199.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56167782 bytes_read=8915681 bytes_retransmit=9 bytes_invalid=0 send_seq=1078469 receive_seq=1078469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=153 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117687 bytes_read=364386 bytes_retransmit=0 bytes_invalid=0 send_seq=19590 receive_seq=19590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997902 sd_pos=2273616 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.39 cputime=5832.826 memavail=3263712 print_time=19233.872 buffer_time=2.109 print_stall=0 extruder: target=210 temp=209.9 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65200.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56172972 bytes_read=8916388 bytes_retransmit=9 bytes_invalid=0 send_seq=1078567 receive_seq=1078567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=254 freq=400007814 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117693 bytes_read=364402 bytes_retransmit=0 bytes_invalid=0 send_seq=19591 receive_seq=19591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997924 sd_pos=2274002 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.39 cputime=5833.091 memavail=3263712 print_time=19234.995 buffer_time=2.190 print_stall=0 extruder: target=210 temp=210.2 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65201.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56176625 bytes_read=8916970 bytes_retransmit=9 bytes_invalid=0 send_seq=1078637 receive_seq=1078637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=6787 freq=400007791 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117699 bytes_read=364431 bytes_retransmit=0 bytes_invalid=0 send_seq=19592 receive_seq=19592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998867 adj=49997960 sd_pos=2276973 heater_bed: target=60 temp=60.0 pwm=0.324 sysload=0.39 cputime=5833.275 memavail=3267624 print_time=19236.466 buffer_time=2.662 print_stall=0 extruder: target=210 temp=210.5 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65202.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56181655 bytes_read=8917642 bytes_retransmit=9 bytes_invalid=0 send_seq=1078731 receive_seq=1078731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=11414 freq=400007766 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117705 bytes_read=364447 bytes_retransmit=0 bytes_invalid=0 send_seq=19593 receive_seq=19593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998866 adj=49997945 sd_pos=2279983 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.39 cputime=5833.347 memavail=3267372 print_time=19237.406 buffer_time=2.600 print_stall=0 extruder: target=210 temp=210.6 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65203.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56188055 bytes_read=8918449 bytes_retransmit=9 bytes_invalid=0 send_seq=1078849 receive_seq=1078849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=13477 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117711 bytes_read=364463 bytes_retransmit=0 bytes_invalid=0 send_seq=19594 receive_seq=19594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997961 sd_pos=2283263 heater_bed: target=60 temp=60.0 pwm=0.295 sysload=0.35 cputime=5833.421 memavail=3266368 print_time=19238.388 buffer_time=2.582 print_stall=0 extruder: target=210 temp=210.6 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65204.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56197722 bytes_read=8919520 bytes_retransmit=9 bytes_invalid=0 send_seq=1079020 receive_seq=1079020 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14632 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117717 bytes_read=364479 bytes_retransmit=0 bytes_invalid=0 send_seq=19595 receive_seq=19595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997996 sd_pos=2287421 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.35 cputime=5833.583 memavail=3266368 print_time=19239.449 buffer_time=2.642 print_stall=0 extruder: target=210 temp=210.5 pwm=0.304
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65205.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56207648 bytes_read=8920592 bytes_retransmit=9 bytes_invalid=0 send_seq=1079194 receive_seq=1079194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=13042 freq=400007745 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117723 bytes_read=364495 bytes_retransmit=0 bytes_invalid=0 send_seq=19596 receive_seq=19596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998870 adj=49997961 sd_pos=2290374 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.35 cputime=5833.716 memavail=3266368 print_time=19240.363 buffer_time=2.556 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65206.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56217005 bytes_read=8921650 bytes_retransmit=9 bytes_invalid=0 send_seq=1079359 receive_seq=1079359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=12715 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=117729 bytes_read=364524 bytes_retransmit=0 bytes_invalid=0 send_seq=19597 receive_seq=19597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997999 sd_pos=2293088 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.35 cputime=5833.790 memavail=3266368 print_time=19241.243 buffer_time=2.434 print_stall=0 extruder: target=210 temp=210.1 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65207.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56226597 bytes_read=8922711 bytes_retransmit=9 bytes_invalid=0 send_seq=1079528 receive_seq=1079528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13222 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=117735 bytes_read=364539 bytes_retransmit=0 bytes_invalid=0 send_seq=19598 receive_seq=19598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997999 sd_pos=2296488 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.35 cputime=5833.872 memavail=3266376 print_time=19242.264 buffer_time=2.454 print_stall=0 extruder: target=210 temp=209.9 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65208.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56236915 bytes_read=8923823 bytes_retransmit=9 bytes_invalid=0 send_seq=1079710 receive_seq=1079710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=8456 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=117741 bytes_read=364554 bytes_retransmit=0 bytes_invalid=0 send_seq=19599 receive_seq=19599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997994 sd_pos=2298045 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.33 cputime=5833.939 memavail=3265904 print_time=19242.963 buffer_time=2.154 print_stall=0 extruder: target=210 temp=209.7 pwm=0.366
Stats 65209.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56245995 bytes_read=8924815 bytes_retransmit=9 bytes_invalid=0 send_seq=1079866 receive_seq=1079866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=3558 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=117747 bytes_read=364569 bytes_retransmit=0 bytes_invalid=0 send_seq=19600 receive_seq=19600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49998003 sd_pos=2300553 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.33 cputime=5834.007 memavail=3265904 print_time=19244.001 buffer_time=2.191 print_stall=0 extruder: target=210 temp=209.7 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65210.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56254541 bytes_read=8925791 bytes_retransmit=9 bytes_invalid=0 send_seq=1080018 receive_seq=1080018 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=15 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=117753 bytes_read=364584 bytes_retransmit=0 bytes_invalid=0 send_seq=19601 receive_seq=19601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998870 adj=49998018 sd_pos=2301506 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.33 cputime=5834.108 memavail=3265664 print_time=19244.833 buffer_time=2.022 print_stall=0 extruder: target=210 temp=209.7 pwm=0.397
Stats 65211.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56258133 bytes_read=8926364 bytes_retransmit=9 bytes_invalid=0 send_seq=1080089 receive_seq=1080089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=94 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117759 bytes_read=364612 bytes_retransmit=0 bytes_invalid=0 send_seq=19602 receive_seq=19602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998870 adj=49997965 sd_pos=2301548 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.33 cputime=5834.374 memavail=3264152 print_time=19245.835 buffer_time=2.022 print_stall=0 extruder: target=210 temp=209.7 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65212.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56263361 bytes_read=8927071 bytes_retransmit=9 bytes_invalid=0 send_seq=1080187 receive_seq=1080187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=403 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117765 bytes_read=364627 bytes_retransmit=0 bytes_invalid=0 send_seq=19603 receive_seq=19603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997961 sd_pos=2301835 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.33 cputime=5834.640 memavail=3264152 print_time=19246.964 buffer_time=2.151 print_stall=0 extruder: target=210 temp=209.8 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65213.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56267101 bytes_read=8927652 bytes_retransmit=9 bytes_invalid=0 send_seq=1080260 receive_seq=1080260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=8447 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117771 bytes_read=364643 bytes_retransmit=0 bytes_invalid=0 send_seq=19604 receive_seq=19604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998868 adj=49997955 sd_pos=2305667 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.38 cputime=5834.816 memavail=3264152 print_time=19248.646 buffer_time=2.832 print_stall=0 extruder: target=210 temp=209.9 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65214.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56272338 bytes_read=8928339 bytes_retransmit=9 bytes_invalid=0 send_seq=1080357 receive_seq=1080357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=11988 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117777 bytes_read=364659 bytes_retransmit=0 bytes_invalid=0 send_seq=19605 receive_seq=19605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998869 adj=49997935 sd_pos=2308200 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.38 cputime=5834.880 memavail=3264152 print_time=19249.545 buffer_time=2.731 print_stall=0 extruder: target=210 temp=210.0 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65215.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56278863 bytes_read=8929161 bytes_retransmit=9 bytes_invalid=0 send_seq=1080478 receive_seq=1080478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=14470 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117783 bytes_read=364675 bytes_retransmit=0 bytes_invalid=0 send_seq=19606 receive_seq=19606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998871 adj=49997955 sd_pos=2311345 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.38 cputime=5834.951 memavail=3263172 print_time=19250.498 buffer_time=2.684 print_stall=0 extruder: target=210 temp=209.9 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65216.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56288153 bytes_read=8930178 bytes_retransmit=9 bytes_invalid=0 send_seq=1080635 receive_seq=1080635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=10690 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117789 bytes_read=364704 bytes_retransmit=0 bytes_invalid=0 send_seq=19607 receive_seq=19607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998878 adj=49997986 sd_pos=2313079 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.38 cputime=5835.063 memavail=3263172 print_time=19250.980 buffer_time=2.165 print_stall=0 extruder: target=210 temp=209.8 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65217.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56297947 bytes_read=8931245 bytes_retransmit=9 bytes_invalid=0 send_seq=1080808 receive_seq=1080808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10212 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117795 bytes_read=364720 bytes_retransmit=0 bytes_invalid=0 send_seq=19608 receive_seq=19608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998881 adj=49998011 sd_pos=2316437 heater_bed: target=60 temp=60.0 pwm=0.253 sysload=0.38 cputime=5835.233 memavail=3263172 print_time=19252.062 buffer_time=2.247 print_stall=0 extruder: target=210 temp=209.7 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65218.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56307782 bytes_read=8932327 bytes_retransmit=9 bytes_invalid=0 send_seq=1080981 receive_seq=1080981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=8462 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117801 bytes_read=364736 bytes_retransmit=0 bytes_invalid=0 send_seq=19609 receive_seq=19609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49998036 sd_pos=2318621 heater_bed: target=60 temp=60.0 pwm=0.024 sysload=0.35 cputime=5835.360 memavail=3262932 print_time=19252.827 buffer_time=2.012 print_stall=0 extruder: target=210 temp=209.7 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65219.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56316542 bytes_read=8933323 bytes_retransmit=9 bytes_invalid=0 send_seq=1081137 receive_seq=1081137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=8965 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117807 bytes_read=364752 bytes_retransmit=0 bytes_invalid=0 send_seq=19610 receive_seq=19610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49998033 sd_pos=2321957 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.35 cputime=5835.437 memavail=3262932 print_time=19253.857 buffer_time=2.040 print_stall=0 extruder: target=210 temp=209.6 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65220.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56326575 bytes_read=8934360 bytes_retransmit=9 bytes_invalid=0 send_seq=1081305 receive_seq=1081305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=8682 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=117813 bytes_read=364768 bytes_retransmit=0 bytes_invalid=0 send_seq=19611 receive_seq=19611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49998035 sd_pos=2324667 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.35 cputime=5835.523 memavail=3262692 print_time=19254.901 buffer_time=2.084 print_stall=0 extruder: target=210 temp=209.6 pwm=0.385
Stats 65221.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56335689 bytes_read=8935403 bytes_retransmit=9 bytes_invalid=0 send_seq=1081467 receive_seq=1081467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=4096 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117819 bytes_read=364797 bytes_retransmit=0 bytes_invalid=0 send_seq=19612 receive_seq=19612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49998034 sd_pos=2327352 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.35 cputime=5835.595 memavail=3262692 print_time=19255.950 buffer_time=2.133 print_stall=0 extruder: target=210 temp=209.7 pwm=0.389
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65222.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56344748 bytes_read=8936374 bytes_retransmit=9 bytes_invalid=0 send_seq=1081618 receive_seq=1081618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=412 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117825 bytes_read=364813 bytes_retransmit=0 bytes_invalid=0 send_seq=19613 receive_seq=19613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49998030 sd_pos=2328373 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.35 cputime=5835.740 memavail=3262948 print_time=19256.952 buffer_time=2.134 print_stall=0 extruder: target=210 temp=209.9 pwm=0.389
Stats 65223.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56348736 bytes_read=8936966 bytes_retransmit=9 bytes_invalid=0 send_seq=1081696 receive_seq=1081696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=63 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117831 bytes_read=364829 bytes_retransmit=0 bytes_invalid=0 send_seq=19614 receive_seq=19614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49997984 sd_pos=2328373 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.40 cputime=5835.963 memavail=3262948 print_time=19257.953 buffer_time=2.134 print_stall=0 extruder: target=210 temp=210.0 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65224.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56353218 bytes_read=8937608 bytes_retransmit=9 bytes_invalid=0 send_seq=1081781 receive_seq=1081781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117837 bytes_read=364845 bytes_retransmit=0 bytes_invalid=0 send_seq=19615 receive_seq=19615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49997804 sd_pos=2328739 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.40 cputime=5836.178 memavail=3262948 print_time=19258.826 buffer_time=2.007 print_stall=0 extruder: target=210 temp=210.1 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65225.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56357260 bytes_read=8938219 bytes_retransmit=9 bytes_invalid=0 send_seq=1081860 receive_seq=1081860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6456 freq=400007787 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117843 bytes_read=364861 bytes_retransmit=0 bytes_invalid=0 send_seq=19616 receive_seq=19616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998878 adj=49997820 sd_pos=2331912 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.40 cputime=5836.349 memavail=3262948 print_time=19260.348 buffer_time=2.528 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65226.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56362391 bytes_read=8938917 bytes_retransmit=9 bytes_invalid=0 send_seq=1081956 receive_seq=1081956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=11015 freq=400007764 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=117849 bytes_read=364890 bytes_retransmit=0 bytes_invalid=0 send_seq=19617 receive_seq=19617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998877 adj=49997828 sd_pos=2334592 heater_bed: target=60 temp=60.0 pwm=0.022 sysload=0.40 cputime=5836.419 memavail=3262948 print_time=19261.316 buffer_time=2.494 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65227.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56369763 bytes_read=8939804 bytes_retransmit=9 bytes_invalid=0 send_seq=1082090 receive_seq=1082090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=11724 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=117855 bytes_read=364906 bytes_retransmit=0 bytes_invalid=0 send_seq=19618 receive_seq=19618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998877 adj=49997863 sd_pos=2337610 heater_bed: target=60 temp=60.0 pwm=0.219 sysload=0.40 cputime=5836.487 memavail=3267132 print_time=19262.272 buffer_time=2.450 print_stall=0 extruder: target=210 temp=210.3 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65228.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56378836 bytes_read=8940825 bytes_retransmit=9 bytes_invalid=0 send_seq=1082251 receive_seq=1082251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=10849 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=117861 bytes_read=364922 bytes_retransmit=0 bytes_invalid=0 send_seq=19619 receive_seq=19619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998877 adj=49997899 sd_pos=2340217 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.37 cputime=5836.595 memavail=3266492 print_time=19263.035 buffer_time=2.213 print_stall=0 extruder: target=210 temp=210.1 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65229.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56388588 bytes_read=8941882 bytes_retransmit=9 bytes_invalid=0 send_seq=1082422 receive_seq=1082422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=9896 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=117867 bytes_read=364938 bytes_retransmit=0 bytes_invalid=0 send_seq=19620 receive_seq=19620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49997927 sd_pos=2343246 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.37 cputime=5836.678 memavail=3266492 print_time=19264.053 buffer_time=2.230 print_stall=0 extruder: target=210 temp=210.0 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65230.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56398255 bytes_read=8942947 bytes_retransmit=9 bytes_invalid=0 send_seq=1082592 receive_seq=1082592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=10976 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=117873 bytes_read=364954 bytes_retransmit=0 bytes_invalid=0 send_seq=19621 receive_seq=19621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49997981 sd_pos=2345774 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.37 cputime=5836.764 memavail=3266492 print_time=19265.053 buffer_time=2.228 print_stall=0 extruder: target=210 temp=209.9 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65231.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56407205 bytes_read=8943965 bytes_retransmit=9 bytes_invalid=0 send_seq=1082750 receive_seq=1082750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=12403 freq=400007754 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117879 bytes_read=364983 bytes_retransmit=0 bytes_invalid=0 send_seq=19622 receive_seq=19622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998878 adj=49997997 sd_pos=2349498 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.37 cputime=5836.850 memavail=3266492 print_time=19266.081 buffer_time=2.257 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65232.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56417966 bytes_read=8945072 bytes_retransmit=9 bytes_invalid=0 send_seq=1082931 receive_seq=1082931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8438 freq=400007742 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117885 bytes_read=364999 bytes_retransmit=0 bytes_invalid=0 send_seq=19623 receive_seq=19623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998879 adj=49997867 sd_pos=2350110 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.37 cputime=5836.967 memavail=3266492 print_time=19266.835 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.7 pwm=0.423
Stats 65233.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56427273 bytes_read=8946074 bytes_retransmit=9 bytes_invalid=0 send_seq=1083088 receive_seq=1083088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=3281 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117891 bytes_read=365015 bytes_retransmit=0 bytes_invalid=0 send_seq=19624 receive_seq=19624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998881 adj=49997895 sd_pos=2350181 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.42 cputime=5837.245 memavail=3264980 print_time=19267.860 buffer_time=2.034 print_stall=0 extruder: target=210 temp=209.8 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65234.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56435627 bytes_read=8947020 bytes_retransmit=9 bytes_invalid=0 send_seq=1083234 receive_seq=1083234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=0 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117897 bytes_read=365031 bytes_retransmit=0 bytes_invalid=0 send_seq=19625 receive_seq=19625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49997960 sd_pos=2350542 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.42 cputime=5837.427 memavail=3264980 print_time=19268.833 buffer_time=2.006 print_stall=0 extruder: target=210 temp=210.0 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65235.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56439677 bytes_read=8947612 bytes_retransmit=9 bytes_invalid=0 send_seq=1083312 receive_seq=1083312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=222 freq=400007740 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=117903 bytes_read=365047 bytes_retransmit=0 bytes_invalid=0 send_seq=19626 receive_seq=19626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49997962 sd_pos=2350832 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.42 cputime=5837.634 memavail=3264980 print_time=19269.988 buffer_time=2.161 print_stall=0 extruder: target=210 temp=210.2 pwm=0.310
Stats 65236.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56444622 bytes_read=8948329 bytes_retransmit=9 bytes_invalid=0 send_seq=1083406 receive_seq=1083406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1084 freq=400007725 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117909 bytes_read=365076 bytes_retransmit=0 bytes_invalid=0 send_seq=19627 receive_seq=19627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49997954 sd_pos=2350973 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.42 cputime=5837.891 memavail=3264980 print_time=19270.994 buffer_time=2.166 print_stall=0 extruder: target=210 temp=210.5 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65237.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56448240 bytes_read=8948891 bytes_retransmit=9 bytes_invalid=0 send_seq=1083478 receive_seq=1083478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=8511 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117915 bytes_read=365092 bytes_retransmit=0 bytes_invalid=0 send_seq=19628 receive_seq=19628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49997977 sd_pos=2355250 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.42 cputime=5838.005 memavail=3264980 print_time=19272.339 buffer_time=2.510 print_stall=0 extruder: target=210 temp=210.7 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65238.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56453860 bytes_read=8949613 bytes_retransmit=9 bytes_invalid=0 send_seq=1083582 receive_seq=1083582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=11483 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117921 bytes_read=365108 bytes_retransmit=0 bytes_invalid=0 send_seq=19629 receive_seq=19629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49997987 sd_pos=2357129 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.47 cputime=5838.088 memavail=3264996 print_time=19273.197 buffer_time=2.367 print_stall=0 extruder: target=210 temp=210.7 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65239.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56462535 bytes_read=8950614 bytes_retransmit=9 bytes_invalid=0 send_seq=1083736 receive_seq=1083736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=13627 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117927 bytes_read=365124 bytes_retransmit=0 bytes_invalid=0 send_seq=19630 receive_seq=19630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998889 adj=49998017 sd_pos=2359907 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.47 cputime=5838.227 memavail=3264996 print_time=19274.274 buffer_time=2.443 print_stall=0 extruder: target=210 temp=210.5 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65240.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56473208 bytes_read=8951756 bytes_retransmit=9 bytes_invalid=0 send_seq=1083924 receive_seq=1083924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=10725 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=117933 bytes_read=365140 bytes_retransmit=0 bytes_invalid=0 send_seq=19631 receive_seq=19631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49998022 sd_pos=2362949 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.47 cputime=5838.297 memavail=3269268 print_time=19275.054 buffer_time=2.222 print_stall=0 extruder: target=210 temp=210.4 pwm=0.340
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65241.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56482239 bytes_read=8952770 bytes_retransmit=9 bytes_invalid=0 send_seq=1084084 receive_seq=1084084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=12779 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117939 bytes_read=365169 bytes_retransmit=0 bytes_invalid=0 send_seq=19632 receive_seq=19632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49998028 sd_pos=2365362 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.47 cputime=5838.387 memavail=3269268 print_time=19276.138 buffer_time=2.306 print_stall=0 extruder: target=210 temp=210.2 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65242.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56492992 bytes_read=8953944 bytes_retransmit=9 bytes_invalid=0 send_seq=1084273 receive_seq=1084273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=10732 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117945 bytes_read=365185 bytes_retransmit=0 bytes_invalid=0 send_seq=19633 receive_seq=19633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49998015 sd_pos=2368083 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.47 cputime=5838.471 memavail=3268792 print_time=19277.064 buffer_time=2.230 print_stall=0 extruder: target=210 temp=209.9 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65243.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56503288 bytes_read=8955056 bytes_retransmit=9 bytes_invalid=0 send_seq=1084455 receive_seq=1084455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=9533 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117951 bytes_read=365201 bytes_retransmit=0 bytes_invalid=0 send_seq=19634 receive_seq=19634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49998003 sd_pos=2370384 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.43 cputime=5838.551 memavail=3268792 print_time=19277.983 buffer_time=2.149 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
Stats 65244.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56512055 bytes_read=8956043 bytes_retransmit=9 bytes_invalid=0 send_seq=1084612 receive_seq=1084612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4969 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117957 bytes_read=365217 bytes_retransmit=0 bytes_invalid=0 send_seq=19635 receive_seq=19635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49998023 sd_pos=2373100 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.43 cputime=5838.658 memavail=3268556 print_time=19278.993 buffer_time=2.159 print_stall=0 extruder: target=210 temp=209.7 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65245.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=56522155 bytes_read=8957164 bytes_retransmit=9 bytes_invalid=0 send_seq=1084790 receive_seq=1084790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=853 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117963 bytes_read=365233 bytes_retransmit=0 bytes_invalid=0 send_seq=19636 receive_seq=19636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49997876 sd_pos=2374051 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.43 cputime=5838.885 memavail=3268556 print_time=19280.011 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.7 pwm=0.373
Stats 65246.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56525790 bytes_read=8957702 bytes_retransmit=9 bytes_invalid=0 send_seq=1084854 receive_seq=1084854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=676 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117969 bytes_read=365262 bytes_retransmit=0 bytes_invalid=0 send_seq=19637 receive_seq=19637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998889 adj=49997951 sd_pos=2374051 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.43 cputime=5839.083 memavail=3268304 print_time=19281.012 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.8 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65247.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56531023 bytes_read=8958359 bytes_retransmit=9 bytes_invalid=0 send_seq=1084945 receive_seq=1084945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=0 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117975 bytes_read=365278 bytes_retransmit=0 bytes_invalid=0 send_seq=19638 receive_seq=19638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997969 sd_pos=2374340 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.43 cputime=5839.296 memavail=3268304 print_time=19281.883 buffer_time=2.047 print_stall=0 extruder: target=210 temp=210.0 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65248.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56534865 bytes_read=8958950 bytes_retransmit=9 bytes_invalid=0 send_seq=1085017 receive_seq=1085017 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=7322 freq=400007819 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117981 bytes_read=365294 bytes_retransmit=0 bytes_invalid=0 send_seq=19639 receive_seq=19639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997861 sd_pos=2377796 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.39 cputime=5839.463 memavail=3267832 print_time=19283.491 buffer_time=2.654 print_stall=0 extruder: target=210 temp=210.1 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65249.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56540024 bytes_read=8959632 bytes_retransmit=9 bytes_invalid=0 send_seq=1085113 receive_seq=1085113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12230 freq=400007793 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117987 bytes_read=365310 bytes_retransmit=0 bytes_invalid=0 send_seq=19640 receive_seq=19640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997791 sd_pos=2379917 heater_bed: target=60 temp=60.0 pwm=0.006 sysload=0.39 cputime=5839.538 memavail=3267832 print_time=19284.447 buffer_time=2.609 print_stall=0 extruder: target=210 temp=210.1 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65250.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56546843 bytes_read=8960454 bytes_retransmit=9 bytes_invalid=0 send_seq=1085237 receive_seq=1085237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=15979 freq=400007776 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117993 bytes_read=365326 bytes_retransmit=0 bytes_invalid=0 send_seq=19641 receive_seq=19641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997832 sd_pos=2383263 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.39 cputime=5839.633 memavail=3267836 print_time=19285.510 buffer_time=2.672 print_stall=0 extruder: target=210 temp=210.1 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65251.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56557343 bytes_read=8961626 bytes_retransmit=9 bytes_invalid=0 send_seq=1085422 receive_seq=1085422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=14814 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=117999 bytes_read=365342 bytes_retransmit=0 bytes_invalid=0 send_seq=19642 receive_seq=19642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997864 sd_pos=2386503 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.39 cputime=5839.784 memavail=3267836 print_time=19286.407 buffer_time=2.568 print_stall=0 extruder: target=210 temp=210.1 pwm=0.321
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65252.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56566766 bytes_read=8962629 bytes_retransmit=9 bytes_invalid=0 send_seq=1085583 receive_seq=1085583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=16024 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118005 bytes_read=365371 bytes_retransmit=0 bytes_invalid=0 send_seq=19643 receive_seq=19643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997892 sd_pos=2388619 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.39 cputime=5839.868 memavail=3267836 print_time=19287.366 buffer_time=2.527 print_stall=0 extruder: target=210 temp=209.9 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65253.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56578241 bytes_read=8963830 bytes_retransmit=9 bytes_invalid=0 send_seq=1085783 receive_seq=1085783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12665 freq=400007911 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118011 bytes_read=365387 bytes_retransmit=0 bytes_invalid=0 send_seq=19644 receive_seq=19644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997921 sd_pos=2391324 heater_bed: target=60 temp=60.0 pwm=0.251 sysload=0.36 cputime=5839.944 memavail=3267836 print_time=19288.287 buffer_time=2.446 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65254.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56587815 bytes_read=8964887 bytes_retransmit=9 bytes_invalid=0 send_seq=1085946 receive_seq=1085946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=12355 freq=400007856 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118023 bytes_read=365419 bytes_retransmit=0 bytes_invalid=0 send_seq=19646 receive_seq=19646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997699 sd_pos=2393008 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.36 cputime=5840.021 memavail=3267840 print_time=19288.998 buffer_time=2.157 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65255.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56598339 bytes_read=8965979 bytes_retransmit=9 bytes_invalid=0 send_seq=1086124 receive_seq=1086124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=7300 freq=400007825 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118029 bytes_read=365435 bytes_retransmit=0 bytes_invalid=0 send_seq=19647 receive_seq=19647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49997765 sd_pos=2393252 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.36 cputime=5840.211 memavail=3267840 print_time=19289.946 buffer_time=2.105 print_stall=0 extruder: target=210 temp=209.6 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65256.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56609390 bytes_read=8967177 bytes_retransmit=9 bytes_invalid=0 send_seq=1086317 receive_seq=1086317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1626 freq=400007800 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118035 bytes_read=365451 bytes_retransmit=0 bytes_invalid=0 send_seq=19648 receive_seq=19648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998891 adj=49997831 sd_pos=2393650 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.36 cputime=5840.451 memavail=3267840 print_time=19291.051 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.7 pwm=0.384
Stats 65257.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56614933 bytes_read=8967878 bytes_retransmit=9 bytes_invalid=0 send_seq=1086414 receive_seq=1086414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007798 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118041 bytes_read=365480 bytes_retransmit=0 bytes_invalid=0 send_seq=19649 receive_seq=19649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998892 adj=49997946 sd_pos=2393694 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.36 cputime=5840.630 memavail=3267840 print_time=19291.933 buffer_time=2.055 print_stall=0 extruder: target=210 temp=209.9 pwm=0.384
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65258.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56619070 bytes_read=8968460 bytes_retransmit=9 bytes_invalid=0 send_seq=1086490 receive_seq=1086490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=640 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118047 bytes_read=365496 bytes_retransmit=0 bytes_invalid=0 send_seq=19650 receive_seq=19650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998891 adj=49997957 sd_pos=2394020 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.41 cputime=5840.861 memavail=3266836 print_time=19293.054 buffer_time=2.175 print_stall=0 extruder: target=210 temp=210.2 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65259.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56623579 bytes_read=8969102 bytes_retransmit=9 bytes_invalid=0 send_seq=1086575 receive_seq=1086575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1109 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118053 bytes_read=365512 bytes_retransmit=0 bytes_invalid=0 send_seq=19651 receive_seq=19651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49997963 sd_pos=2394328 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.41 cputime=5841.069 memavail=3266836 print_time=19294.000 buffer_time=2.120 print_stall=0 extruder: target=210 temp=210.3 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65260.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56628154 bytes_read=8969753 bytes_retransmit=9 bytes_invalid=0 send_seq=1086662 receive_seq=1086662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3971 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118059 bytes_read=365528 bytes_retransmit=0 bytes_invalid=0 send_seq=19652 receive_seq=19652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997986 sd_pos=2397017 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.41 cputime=5841.131 memavail=3266836 print_time=19294.893 buffer_time=2.012 print_stall=0 extruder: target=210 temp=210.5 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65261.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56633589 bytes_read=8970476 bytes_retransmit=9 bytes_invalid=0 send_seq=1086763 receive_seq=1086763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=9617 freq=400007719 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118065 bytes_read=365544 bytes_retransmit=0 bytes_invalid=0 send_seq=19653 receive_seq=19653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998889 adj=49997979 sd_pos=2399437 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.41 cputime=5841.214 memavail=3266836 print_time=19295.912 buffer_time=2.030 print_stall=0 extruder: target=210 temp=210.5 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65262.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56642386 bytes_read=8971446 bytes_retransmit=9 bytes_invalid=0 send_seq=1086914 receive_seq=1086914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=14535 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118071 bytes_read=365573 bytes_retransmit=0 bytes_invalid=0 send_seq=19654 receive_seq=19654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997999 sd_pos=2403236 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.41 cputime=5841.354 memavail=3266844 print_time=19297.220 buffer_time=2.337 print_stall=0 extruder: target=210 temp=210.3 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65263.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56653586 bytes_read=8972634 bytes_retransmit=9 bytes_invalid=0 send_seq=1087109 receive_seq=1087109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=12546 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118077 bytes_read=365589 bytes_retransmit=0 bytes_invalid=0 send_seq=19655 receive_seq=19655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49997994 sd_pos=2406376 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.38 cputime=5841.441 memavail=3266088 print_time=19298.304 buffer_time=2.420 print_stall=0 extruder: target=210 temp=210.1 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65264.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56664003 bytes_read=8973746 bytes_retransmit=9 bytes_invalid=0 send_seq=1087291 receive_seq=1087291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=12162 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118083 bytes_read=365605 bytes_retransmit=0 bytes_invalid=0 send_seq=19656 receive_seq=19656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49998009 sd_pos=2408295 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.38 cputime=5841.529 memavail=3266088 print_time=19299.188 buffer_time=2.304 print_stall=0 extruder: target=210 temp=209.8 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65265.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56673787 bytes_read=8974788 bytes_retransmit=9 bytes_invalid=0 send_seq=1087456 receive_seq=1087456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=12988 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118089 bytes_read=365621 bytes_retransmit=0 bytes_invalid=0 send_seq=19657 receive_seq=19657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49998011 sd_pos=2411167 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.38 cputime=5841.617 memavail=3266088 print_time=19300.168 buffer_time=2.283 print_stall=0 extruder: target=210 temp=209.6 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65266.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56684464 bytes_read=8975930 bytes_retransmit=9 bytes_invalid=0 send_seq=1087638 receive_seq=1087638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=8965 freq=400007743 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118095 bytes_read=365637 bytes_retransmit=0 bytes_invalid=0 send_seq=19658 receive_seq=19658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997855 sd_pos=2411735 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.38 cputime=5841.754 memavail=3266088 print_time=19300.931 buffer_time=2.046 print_stall=0 extruder: target=210 temp=209.6 pwm=0.414
Stats 65267.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56694161 bytes_read=8976987 bytes_retransmit=9 bytes_invalid=0 send_seq=1087809 receive_seq=1087809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3699 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118101 bytes_read=365666 bytes_retransmit=0 bytes_invalid=0 send_seq=19659 receive_seq=19659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998886 adj=49997890 sd_pos=2411835 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.38 cputime=5842.018 memavail=3266088 print_time=19301.956 buffer_time=2.070 print_stall=0 extruder: target=210 temp=209.5 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65268.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56703004 bytes_read=8977979 bytes_retransmit=9 bytes_invalid=0 send_seq=1087964 receive_seq=1087964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118107 bytes_read=365682 bytes_retransmit=0 bytes_invalid=0 send_seq=19660 receive_seq=19660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49997914 sd_pos=2412198 heater_bed: target=60 temp=60.0 pwm=0.279 sysload=0.35 cputime=5842.199 memavail=3265340 print_time=19302.931 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.6 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65269.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56706925 bytes_read=8978550 bytes_retransmit=9 bytes_invalid=0 send_seq=1088035 receive_seq=1088035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=210 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118113 bytes_read=365698 bytes_retransmit=0 bytes_invalid=0 send_seq=19661 receive_seq=19661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998885 adj=49997931 sd_pos=2412593 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.35 cputime=5842.409 memavail=3265340 print_time=19303.991 buffer_time=2.103 print_stall=0 extruder: target=210 temp=209.8 pwm=0.393
Stats 65270.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56711818 bytes_read=8979217 bytes_retransmit=9 bytes_invalid=0 send_seq=1088128 receive_seq=1088128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=585 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118119 bytes_read=365714 bytes_retransmit=0 bytes_invalid=0 send_seq=19662 receive_seq=19662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998884 adj=49997960 sd_pos=2412737 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.35 cputime=5842.629 memavail=3265340 print_time=19304.907 buffer_time=2.018 print_stall=0 extruder: target=210 temp=210.1 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65271.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56715775 bytes_read=8979835 bytes_retransmit=9 bytes_invalid=0 send_seq=1088205 receive_seq=1088205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=10190 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118125 bytes_read=365730 bytes_retransmit=0 bytes_invalid=0 send_seq=19663 receive_seq=19663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998884 adj=49997990 sd_pos=2416182 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.35 cputime=5842.787 memavail=3265340 print_time=19306.652 buffer_time=2.763 print_stall=0 extruder: target=210 temp=210.3 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65272.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56721638 bytes_read=8980591 bytes_retransmit=9 bytes_invalid=0 send_seq=1088313 receive_seq=1088313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11960 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118131 bytes_read=365759 bytes_retransmit=0 bytes_invalid=0 send_seq=19664 receive_seq=19664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49997970 sd_pos=2418612 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.35 cputime=5842.885 memavail=3265340 print_time=19307.407 buffer_time=2.517 print_stall=0 extruder: target=210 temp=210.4 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65273.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56729335 bytes_read=8981445 bytes_retransmit=9 bytes_invalid=0 send_seq=1088444 receive_seq=1088444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=14382 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118137 bytes_read=365775 bytes_retransmit=0 bytes_invalid=0 send_seq=19665 receive_seq=19665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998889 adj=49998044 sd_pos=2421048 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.32 cputime=5843.020 memavail=3265340 print_time=19308.412 buffer_time=2.520 print_stall=0 extruder: target=210 temp=210.4 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65274.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56739853 bytes_read=8982580 bytes_retransmit=9 bytes_invalid=0 send_seq=1088628 receive_seq=1088628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=11966 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118143 bytes_read=365791 bytes_retransmit=0 bytes_invalid=0 send_seq=19666 receive_seq=19666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49998028 sd_pos=2423872 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.32 cputime=5843.094 memavail=3265340 print_time=19309.185 buffer_time=2.293 print_stall=0 extruder: target=210 temp=210.3 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65275.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56748708 bytes_read=8983576 bytes_retransmit=9 bytes_invalid=0 send_seq=1088784 receive_seq=1088784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=14707 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118149 bytes_read=365807 bytes_retransmit=0 bytes_invalid=0 send_seq=19667 receive_seq=19667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49998053 sd_pos=2426141 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.32 cputime=5843.178 memavail=3265340 print_time=19310.219 buffer_time=2.326 print_stall=0 extruder: target=210 temp=210.2 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65276.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56759986 bytes_read=8984774 bytes_retransmit=9 bytes_invalid=0 send_seq=1088980 receive_seq=1088980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=11024 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118155 bytes_read=365823 bytes_retransmit=0 bytes_invalid=0 send_seq=19668 receive_seq=19668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49998031 sd_pos=2428948 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.32 cputime=5843.250 memavail=3265340 print_time=19311.096 buffer_time=2.202 print_stall=0 extruder: target=210 temp=210.0 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65277.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56770535 bytes_read=8985916 bytes_retransmit=9 bytes_invalid=0 send_seq=1089165 receive_seq=1089165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=11463 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118161 bytes_read=365852 bytes_retransmit=0 bytes_invalid=0 send_seq=19669 receive_seq=19669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998888 adj=49998043 sd_pos=2430665 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.32 cputime=5843.334 memavail=3265340 print_time=19311.947 buffer_time=2.052 print_stall=0 extruder: target=210 temp=210.0 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65278.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56780586 bytes_read=8987012 bytes_retransmit=9 bytes_invalid=0 send_seq=1089341 receive_seq=1089341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=7708 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118167 bytes_read=365868 bytes_retransmit=0 bytes_invalid=0 send_seq=19670 receive_seq=19670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49998029 sd_pos=2430811 heater_bed: target=60 temp=60.0 pwm=0.265 sysload=0.30 cputime=5843.591 memavail=3264848 print_time=19313.140 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65279.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56792247 bytes_read=8988184 bytes_retransmit=9 bytes_invalid=0 send_seq=1089535 receive_seq=1089535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=596 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118173 bytes_read=365884 bytes_retransmit=0 bytes_invalid=0 send_seq=19671 receive_seq=19671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998891 adj=49998045 sd_pos=2431276 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.30 cputime=5843.771 memavail=3264848 print_time=19313.946 buffer_time=2.013 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
Stats 65280.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56797316 bytes_read=8988890 bytes_retransmit=9 bytes_invalid=0 send_seq=1089630 receive_seq=1089630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=369 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118179 bytes_read=365900 bytes_retransmit=0 bytes_invalid=0 send_seq=19672 receive_seq=19672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49997929 sd_pos=2431367 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.30 cputime=5843.988 memavail=3264848 print_time=19315.145 buffer_time=2.209 print_stall=0 extruder: target=210 temp=209.9 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65281.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56801582 bytes_read=8989518 bytes_retransmit=9 bytes_invalid=0 send_seq=1089712 receive_seq=1089712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118185 bytes_read=365916 bytes_retransmit=0 bytes_invalid=0 send_seq=19673 receive_seq=19673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998890 adj=49997939 sd_pos=2431734 heater_bed: target=60 temp=60.0 pwm=0.340 sysload=0.30 cputime=5844.172 memavail=3264848 print_time=19315.961 buffer_time=2.025 print_stall=0 extruder: target=210 temp=210.0 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65282.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56806018 bytes_read=8990150 bytes_retransmit=9 bytes_invalid=0 send_seq=1089798 receive_seq=1089798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=6661 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118191 bytes_read=365945 bytes_retransmit=0 bytes_invalid=0 send_seq=19674 receive_seq=19674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998891 adj=49997902 sd_pos=2434534 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.30 cputime=5844.411 memavail=3264848 print_time=19317.695 buffer_time=2.758 print_stall=0 extruder: target=210 temp=210.2 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65283.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56810636 bytes_read=8990821 bytes_retransmit=9 bytes_invalid=0 send_seq=1089886 receive_seq=1089886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=13431 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118197 bytes_read=365961 bytes_retransmit=0 bytes_invalid=0 send_seq=19675 receive_seq=19675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998892 adj=49997951 sd_pos=2436974 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.27 cputime=5844.522 memavail=3264608 print_time=19318.783 buffer_time=2.845 print_stall=0 extruder: target=210 temp=210.2 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65284.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56816835 bytes_read=8991594 bytes_retransmit=9 bytes_invalid=0 send_seq=1090001 receive_seq=1090001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=14635 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118203 bytes_read=365977 bytes_retransmit=0 bytes_invalid=0 send_seq=19676 receive_seq=19676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998893 adj=49998007 sd_pos=2440059 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.27 cputime=5844.587 memavail=3264608 print_time=19319.623 buffer_time=2.685 print_stall=0 extruder: target=210 temp=210.2 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65285.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56825545 bytes_read=8992526 bytes_retransmit=9 bytes_invalid=0 send_seq=1090147 receive_seq=1090147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=17547 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118209 bytes_read=365993 bytes_retransmit=0 bytes_invalid=0 send_seq=19677 receive_seq=19677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998893 adj=49998039 sd_pos=2443037 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5844.670 memavail=3264608 print_time=19320.640 buffer_time=2.701 print_stall=0 extruder: target=210 temp=210.2 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65286.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56836638 bytes_read=8993743 bytes_retransmit=9 bytes_invalid=0 send_seq=1090341 receive_seq=1090341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=18532 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118215 bytes_read=366009 bytes_retransmit=0 bytes_invalid=0 send_seq=19678 receive_seq=19678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998895 adj=49998032 sd_pos=2446104 heater_bed: target=60 temp=60.0 pwm=0.275 sysload=0.27 cputime=5844.764 memavail=3264608 print_time=19321.801 buffer_time=2.861 print_stall=0 extruder: target=210 temp=210.1 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65287.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56847023 bytes_read=8994865 bytes_retransmit=9 bytes_invalid=0 send_seq=1090525 receive_seq=1090525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=14672 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118221 bytes_read=366038 bytes_retransmit=0 bytes_invalid=0 send_seq=19679 receive_seq=19679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998895 adj=49998041 sd_pos=2447917 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.27 cputime=5844.830 memavail=3264612 print_time=19322.428 buffer_time=2.487 print_stall=0 extruder: target=210 temp=210.1 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65288.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56856879 bytes_read=8995932 bytes_retransmit=9 bytes_invalid=0 send_seq=1090698 receive_seq=1090698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=15336 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118227 bytes_read=366054 bytes_retransmit=0 bytes_invalid=0 send_seq=19680 receive_seq=19680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998897 adj=49998041 sd_pos=2450506 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.25 cputime=5844.926 memavail=3264872 print_time=19323.472 buffer_time=2.531 print_stall=0 extruder: target=210 temp=210.0 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65289.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56868567 bytes_read=8997188 bytes_retransmit=9 bytes_invalid=0 send_seq=1090903 receive_seq=1090903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=9771 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118233 bytes_read=366070 bytes_retransmit=0 bytes_invalid=0 send_seq=19681 receive_seq=19681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49998021 sd_pos=2451108 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.25 cputime=5845.152 memavail=3264632 print_time=19324.188 buffer_time=2.246 print_stall=0 extruder: target=210 temp=210.0 pwm=0.360
Stats 65290.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=56877926 bytes_read=8998215 bytes_retransmit=9 bytes_invalid=0 send_seq=1091068 receive_seq=1091068 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=4425 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118239 bytes_read=366086 bytes_retransmit=0 bytes_invalid=0 send_seq=19682 receive_seq=19682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49998095 sd_pos=2451153 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.25 cputime=5845.366 memavail=3263876 print_time=19325.191 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.0 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65291.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56887418 bytes_read=8999233 bytes_retransmit=9 bytes_invalid=0 send_seq=1091225 receive_seq=1091225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=232 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118245 bytes_read=366102 bytes_retransmit=0 bytes_invalid=0 send_seq=19683 receive_seq=19683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49998062 sd_pos=2451549 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.25 cputime=5845.545 memavail=3263876 print_time=19326.159 buffer_time=2.175 print_stall=0 extruder: target=210 temp=210.0 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65292.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56890970 bytes_read=8999799 bytes_retransmit=9 bytes_invalid=0 send_seq=1091295 receive_seq=1091295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1354 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118251 bytes_read=366131 bytes_retransmit=0 bytes_invalid=0 send_seq=19684 receive_seq=19684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49998069 sd_pos=2451929 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.25 cputime=5845.761 memavail=3267748 print_time=19327.284 buffer_time=2.299 print_stall=0 extruder: target=210 temp=210.1 pwm=0.360
Stats 65293.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56895899 bytes_read=9000446 bytes_retransmit=9 bytes_invalid=0 send_seq=1091384 receive_seq=1091384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=733 freq=400007577 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118257 bytes_read=366147 bytes_retransmit=0 bytes_invalid=0 send_seq=19685 receive_seq=19685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49998038 sd_pos=2452030 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.23 cputime=5845.967 memavail=3267392 print_time=19328.093 buffer_time=2.108 print_stall=0 extruder: target=210 temp=210.1 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65294.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56899788 bytes_read=9001037 bytes_retransmit=9 bytes_invalid=0 send_seq=1091459 receive_seq=1091459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=5428 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118263 bytes_read=366162 bytes_retransmit=0 bytes_invalid=0 send_seq=19686 receive_seq=19686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49998035 sd_pos=2454625 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.23 cputime=5846.089 memavail=3267392 print_time=19329.315 buffer_time=2.329 print_stall=0 extruder: target=210 temp=210.2 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65295.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56905394 bytes_read=9001768 bytes_retransmit=9 bytes_invalid=0 send_seq=1091563 receive_seq=1091563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=11063 freq=400007561 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118269 bytes_read=366177 bytes_retransmit=0 bytes_invalid=0 send_seq=19687 receive_seq=19687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49998004 sd_pos=2456990 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.23 cputime=5846.234 memavail=3266888 print_time=19330.335 buffer_time=2.348 print_stall=0 extruder: target=210 temp=210.2 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65296.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56913123 bytes_read=9002686 bytes_retransmit=9 bytes_invalid=0 send_seq=1091703 receive_seq=1091703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=9841 freq=400007542 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118275 bytes_read=366192 bytes_retransmit=0 bytes_invalid=0 send_seq=19688 receive_seq=19688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49998045 sd_pos=2459365 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.23 cputime=5846.297 memavail=3266888 print_time=19331.097 buffer_time=2.109 print_stall=0 extruder: target=210 temp=210.0 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65297.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56923025 bytes_read=9003753 bytes_retransmit=9 bytes_invalid=0 send_seq=1091873 receive_seq=1091873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=15361 freq=400007535 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118281 bytes_read=366220 bytes_retransmit=0 bytes_invalid=0 send_seq=19689 receive_seq=19689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49998081 sd_pos=2464002 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.23 cputime=5846.408 memavail=3266888 print_time=19332.761 buffer_time=2.772 print_stall=0 extruder: target=210 temp=209.9 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65298.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56932690 bytes_read=9004829 bytes_retransmit=9 bytes_invalid=0 send_seq=1092045 receive_seq=1092045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=16645 freq=400007533 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118287 bytes_read=366235 bytes_retransmit=0 bytes_invalid=0 send_seq=19690 receive_seq=19690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998907 adj=49998042 sd_pos=2466186 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.21 cputime=5846.502 memavail=3266144 print_time=19333.757 buffer_time=2.768 print_stall=0 extruder: target=210 temp=209.6 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65299.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56943341 bytes_read=9005966 bytes_retransmit=9 bytes_invalid=0 send_seq=1092232 receive_seq=1092232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=12044 freq=400007538 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118293 bytes_read=366251 bytes_retransmit=0 bytes_invalid=0 send_seq=19691 receive_seq=19691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998906 adj=49998058 sd_pos=2468569 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.21 cputime=5846.569 memavail=3266144 print_time=19334.417 buffer_time=2.428 print_stall=0 extruder: target=210 temp=209.5 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65300.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56951870 bytes_read=9006943 bytes_retransmit=9 bytes_invalid=0 send_seq=1092384 receive_seq=1092384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=15731 freq=400007529 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118299 bytes_read=366267 bytes_retransmit=0 bytes_invalid=0 send_seq=19692 receive_seq=19692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998906 adj=49998039 sd_pos=2471108 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.21 cputime=5846.709 memavail=3266144 print_time=19335.521 buffer_time=2.531 print_stall=0 extruder: target=210 temp=209.5 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65301.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56962780 bytes_read=9008130 bytes_retransmit=9 bytes_invalid=0 send_seq=1092575 receive_seq=1092575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=9900 freq=400007534 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118305 bytes_read=366283 bytes_retransmit=0 bytes_invalid=0 send_seq=19693 receive_seq=19693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49998043 sd_pos=2471351 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.21 cputime=5846.860 memavail=3266144 print_time=19336.232 buffer_time=2.227 print_stall=0 extruder: target=210 temp=209.6 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65302.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56972744 bytes_read=9009207 bytes_retransmit=9 bytes_invalid=0 send_seq=1092750 receive_seq=1092750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=4729 freq=400007532 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118311 bytes_read=366312 bytes_retransmit=0 bytes_invalid=0 send_seq=19694 receive_seq=19694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49998017 sd_pos=2471556 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.21 cputime=5847.083 memavail=3265892 print_time=19337.404 buffer_time=2.371 print_stall=0 extruder: target=210 temp=209.8 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65303.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56981745 bytes_read=9010213 bytes_retransmit=9 bytes_invalid=0 send_seq=1092905 receive_seq=1092905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=190 freq=400007534 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118317 bytes_read=366328 bytes_retransmit=0 bytes_invalid=0 send_seq=19695 receive_seq=19695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49997982 sd_pos=2471838 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.19 cputime=5847.243 memavail=3265896 print_time=19338.145 buffer_time=2.112 print_stall=0 extruder: target=210 temp=210.0 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65304.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56985601 bytes_read=9010785 bytes_retransmit=9 bytes_invalid=0 send_seq=1092979 receive_seq=1092979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1360 freq=400007535 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118323 bytes_read=366344 bytes_retransmit=0 bytes_invalid=0 send_seq=19696 receive_seq=19696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49997970 sd_pos=2472270 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.19 cputime=5847.470 memavail=3265896 print_time=19339.330 buffer_time=2.285 print_stall=0 extruder: target=210 temp=210.2 pwm=0.341
Stats 65305.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56990497 bytes_read=9011420 bytes_retransmit=9 bytes_invalid=0 send_seq=1093066 receive_seq=1093066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=854 freq=400007539 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118329 bytes_read=366360 bytes_retransmit=0 bytes_invalid=0 send_seq=19697 receive_seq=19697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49997963 sd_pos=2472270 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.19 cputime=5847.709 memavail=3265900 print_time=19340.160 buffer_time=2.115 print_stall=0 extruder: target=210 temp=210.5 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65306.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=56994466 bytes_read=9012049 bytes_retransmit=9 bytes_invalid=0 send_seq=1093143 receive_seq=1093143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4334 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118335 bytes_read=366376 bytes_retransmit=0 bytes_invalid=0 send_seq=19698 receive_seq=19698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998907 adj=49997947 sd_pos=2474737 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.19 cputime=5847.824 memavail=3265900 print_time=19341.201 buffer_time=2.154 print_stall=0 extruder: target=210 temp=210.6 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65307.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57000213 bytes_read=9012772 bytes_retransmit=9 bytes_invalid=0 send_seq=1093245 receive_seq=1093245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=10378 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118347 bytes_read=366421 bytes_retransmit=0 bytes_invalid=0 send_seq=19700 receive_seq=19700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997977 sd_pos=2477133 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.19 cputime=5847.910 memavail=3265144 print_time=19342.278 buffer_time=2.231 print_stall=0 extruder: target=210 temp=210.5 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65308.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57008036 bytes_read=9013694 bytes_retransmit=9 bytes_invalid=0 send_seq=1093386 receive_seq=1093386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=19031 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118353 bytes_read=366437 bytes_retransmit=0 bytes_invalid=0 send_seq=19701 receive_seq=19701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49997922 sd_pos=2482110 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.18 cputime=5848.022 memavail=3264924 print_time=19344.044 buffer_time=2.960 print_stall=0 extruder: target=210 temp=210.3 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65309.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57019142 bytes_read=9014870 bytes_retransmit=9 bytes_invalid=0 send_seq=1093578 receive_seq=1093578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=15397 freq=400007563 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118359 bytes_read=366453 bytes_retransmit=0 bytes_invalid=0 send_seq=19702 receive_seq=19702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49997945 sd_pos=2484689 heater_bed: target=60 temp=60.0 pwm=0.049 sysload=0.18 cputime=5848.099 memavail=3264924 print_time=19344.929 buffer_time=2.844 print_stall=0 extruder: target=210 temp=210.0 pwm=0.391
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65310.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57027840 bytes_read=9015802 bytes_retransmit=9 bytes_invalid=0 send_seq=1093724 receive_seq=1093724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=18802 freq=400007557 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118365 bytes_read=366469 bytes_retransmit=0 bytes_invalid=0 send_seq=19703 receive_seq=19703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997957 sd_pos=2487103 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.18 cputime=5848.225 memavail=3264924 print_time=19346.029 buffer_time=2.943 print_stall=0 extruder: target=210 temp=209.7 pwm=0.391
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65311.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57038977 bytes_read=9017010 bytes_retransmit=9 bytes_invalid=0 send_seq=1093919 receive_seq=1093919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14159 freq=400007550 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118371 bytes_read=366485 bytes_retransmit=0 bytes_invalid=0 send_seq=19704 receive_seq=19704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49997981 sd_pos=2489530 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.18 cputime=5848.294 memavail=3264924 print_time=19346.768 buffer_time=2.682 print_stall=0 extruder: target=210 temp=209.5 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65312.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57047389 bytes_read=9017941 bytes_retransmit=9 bytes_invalid=0 send_seq=1094062 receive_seq=1094062 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=17357 freq=400007541 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118377 bytes_read=366514 bytes_retransmit=0 bytes_invalid=0 send_seq=19705 receive_seq=19705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49997973 sd_pos=2491882 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.18 cputime=5848.377 memavail=3264924 print_time=19347.859 buffer_time=2.772 print_stall=0 extruder: target=210 temp=209.4 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65313.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57058754 bytes_read=9019128 bytes_retransmit=9 bytes_invalid=0 send_seq=1094259 receive_seq=1094259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=9250 freq=400007546 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118383 bytes_read=366530 bytes_retransmit=0 bytes_invalid=0 send_seq=19706 receive_seq=19706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49997966 sd_pos=2492105 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.16 cputime=5848.467 memavail=3264924 print_time=19348.152 buffer_time=2.064 print_stall=0 extruder: target=210 temp=209.4 pwm=0.401
Stats 65314.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57067579 bytes_read=9020130 bytes_retransmit=9 bytes_invalid=0 send_seq=1094416 receive_seq=1094416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=4863 freq=400007552 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118389 bytes_read=366546 bytes_retransmit=0 bytes_invalid=0 send_seq=19707 receive_seq=19707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998900 adj=49997948 sd_pos=2492105 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.16 cputime=5848.688 memavail=3264924 print_time=19349.245 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.5 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65315.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57077815 bytes_read=9021206 bytes_retransmit=9 bytes_invalid=0 send_seq=1094588 receive_seq=1094588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=290 freq=400007548 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118395 bytes_read=366562 bytes_retransmit=0 bytes_invalid=0 send_seq=19708 receive_seq=19708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997925 sd_pos=2492535 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.16 cputime=5848.924 memavail=3264936 print_time=19350.295 buffer_time=2.162 print_stall=0 extruder: target=210 temp=209.9 pwm=0.344
Stats 65316.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57081416 bytes_read=9021719 bytes_retransmit=9 bytes_invalid=0 send_seq=1094648 receive_seq=1094648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=729 freq=400007547 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118401 bytes_read=366578 bytes_retransmit=0 bytes_invalid=0 send_seq=19709 receive_seq=19709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998900 adj=49997930 sd_pos=2492680 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.16 cputime=5849.118 memavail=3264936 print_time=19351.331 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.2 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65317.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57086485 bytes_read=9022425 bytes_retransmit=9 bytes_invalid=0 send_seq=1094743 receive_seq=1094743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=713 freq=400007549 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118407 bytes_read=366607 bytes_retransmit=0 bytes_invalid=0 send_seq=19710 receive_seq=19710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997951 sd_pos=2493072 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.16 cputime=5849.341 memavail=3264936 print_time=19352.253 buffer_time=2.119 print_stall=0 extruder: target=210 temp=210.6 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65318.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57090377 bytes_read=9022992 bytes_retransmit=9 bytes_invalid=0 send_seq=1094816 receive_seq=1094816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=6033 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118413 bytes_read=366623 bytes_retransmit=0 bytes_invalid=0 send_seq=19711 receive_seq=19711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997936 sd_pos=2495560 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.23 cputime=5849.496 memavail=3264684 print_time=19353.626 buffer_time=2.492 print_stall=0 extruder: target=210 temp=210.8 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65319.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57095724 bytes_read=9023689 bytes_retransmit=9 bytes_invalid=0 send_seq=1094915 receive_seq=1094915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13461 freq=400007564 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118419 bytes_read=366639 bytes_retransmit=0 bytes_invalid=0 send_seq=19712 receive_seq=19712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997900 sd_pos=2498275 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.23 cputime=5849.580 memavail=3264696 print_time=19354.802 buffer_time=2.667 print_stall=0 extruder: target=210 temp=210.9 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65320.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57102719 bytes_read=9024545 bytes_retransmit=9 bytes_invalid=0 send_seq=1095040 receive_seq=1095040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=12574 freq=400007555 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118425 bytes_read=366655 bytes_retransmit=0 bytes_invalid=0 send_seq=19713 receive_seq=19713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997931 sd_pos=2500522 heater_bed: target=60 temp=60.0 pwm=0.270 sysload=0.23 cputime=5849.640 memavail=3264696 print_time=19355.528 buffer_time=2.392 print_stall=0 extruder: target=210 temp=210.6 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65321.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57112308 bytes_read=9025613 bytes_retransmit=9 bytes_invalid=0 send_seq=1095210 receive_seq=1095210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=16199 freq=400007546 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118431 bytes_read=366671 bytes_retransmit=0 bytes_invalid=0 send_seq=19714 receive_seq=19714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997948 sd_pos=2503887 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.23 cputime=5849.798 memavail=3269432 print_time=19356.777 buffer_time=2.640 print_stall=0 extruder: target=210 temp=210.5 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65322.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57123061 bytes_read=9026760 bytes_retransmit=9 bytes_invalid=0 send_seq=1095399 receive_seq=1095399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=11344 freq=400007547 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118437 bytes_read=366700 bytes_retransmit=0 bytes_invalid=0 send_seq=19715 receive_seq=19715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998898 adj=49997955 sd_pos=2506145 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.23 cputime=5849.865 memavail=3269180 print_time=19357.431 buffer_time=2.293 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65323.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57133079 bytes_read=9027866 bytes_retransmit=9 bytes_invalid=0 send_seq=1095574 receive_seq=1095574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13656 freq=400007553 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118443 bytes_read=366716 bytes_retransmit=0 bytes_invalid=0 send_seq=19716 receive_seq=19716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998897 adj=49997946 sd_pos=2508590 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.21 cputime=5849.962 memavail=3268944 print_time=19358.498 buffer_time=2.359 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65324.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57143179 bytes_read=9028963 bytes_retransmit=9 bytes_invalid=0 send_seq=1095753 receive_seq=1095753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=9587 freq=400007556 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118449 bytes_read=366732 bytes_retransmit=0 bytes_invalid=0 send_seq=19717 receive_seq=19717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998897 adj=49997933 sd_pos=2510645 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.21 cputime=5850.026 memavail=3268944 print_time=19359.170 buffer_time=2.030 print_stall=0 extruder: target=210 temp=209.6 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65325.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57153632 bytes_read=9030035 bytes_retransmit=9 bytes_invalid=0 send_seq=1095927 receive_seq=1095927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=12395 freq=400007556 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118455 bytes_read=366748 bytes_retransmit=0 bytes_invalid=0 send_seq=19718 receive_seq=19718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998897 adj=49997917 sd_pos=2513301 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.21 cputime=5850.120 memavail=3268944 print_time=19360.394 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.5 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65326.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57163057 bytes_read=9031071 bytes_retransmit=9 bytes_invalid=0 send_seq=1096085 receive_seq=1096085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=8359 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118461 bytes_read=366764 bytes_retransmit=0 bytes_invalid=0 send_seq=19719 receive_seq=19719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998907 adj=49997937 sd_pos=2513458 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.21 cputime=5850.335 memavail=3268696 print_time=19361.322 buffer_time=2.180 print_stall=0 extruder: target=210 temp=209.5 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65327.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57173601 bytes_read=9032198 bytes_retransmit=9 bytes_invalid=0 send_seq=1096271 receive_seq=1096271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=2103 freq=400007577 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118467 bytes_read=366793 bytes_retransmit=0 bytes_invalid=0 send_seq=19720 receive_seq=19720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998907 adj=49998015 sd_pos=2513781 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.21 cputime=5850.531 memavail=3267940 print_time=19362.267 buffer_time=2.125 print_stall=0 extruder: target=210 temp=209.6 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65328.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57180584 bytes_read=9032980 bytes_retransmit=9 bytes_invalid=0 send_seq=1096387 receive_seq=1096387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=294 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118473 bytes_read=366809 bytes_retransmit=0 bytes_invalid=0 send_seq=19721 receive_seq=19721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998906 adj=49998014 sd_pos=2513998 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.20 cputime=5850.741 memavail=3267440 print_time=19363.311 buffer_time=2.168 print_stall=0 extruder: target=210 temp=209.7 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65329.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57184321 bytes_read=9033566 bytes_retransmit=9 bytes_invalid=0 send_seq=1096458 receive_seq=1096458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=648 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118479 bytes_read=366825 bytes_retransmit=0 bytes_invalid=0 send_seq=19722 receive_seq=19722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997983 sd_pos=2514289 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.20 cputime=5850.917 memavail=3267440 print_time=19364.187 buffer_time=2.043 print_stall=0 extruder: target=210 temp=210.1 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65330.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57189010 bytes_read=9034168 bytes_retransmit=9 bytes_invalid=0 send_seq=1096538 receive_seq=1096538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1682 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118485 bytes_read=366841 bytes_retransmit=0 bytes_invalid=0 send_seq=19723 receive_seq=19723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997966 sd_pos=2514642 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.20 cputime=5851.171 memavail=3267440 print_time=19365.261 buffer_time=2.116 print_stall=0 extruder: target=210 temp=210.3 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65331.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57194076 bytes_read=9034871 bytes_retransmit=9 bytes_invalid=0 send_seq=1096632 receive_seq=1096632 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=40 upcoming_bytes=14775 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118491 bytes_read=366857 bytes_retransmit=0 bytes_invalid=0 send_seq=19724 receive_seq=19724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998904 adj=49997970 sd_pos=2519528 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.20 cputime=5851.328 memavail=3267440 print_time=19367.167 buffer_time=2.962 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65332.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57199994 bytes_read=9035617 bytes_retransmit=9 bytes_invalid=0 send_seq=1096738 receive_seq=1096738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=15376 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118497 bytes_read=366886 bytes_retransmit=0 bytes_invalid=0 send_seq=19725 receive_seq=19725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49997943 sd_pos=2522231 heater_bed: target=60 temp=60.0 pwm=0.272 sysload=0.20 cputime=5851.393 memavail=3267440 print_time=19367.976 buffer_time=2.770 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65333.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57208346 bytes_read=9036524 bytes_retransmit=9 bytes_invalid=0 send_seq=1096879 receive_seq=1096879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=18710 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118503 bytes_read=366902 bytes_retransmit=0 bytes_invalid=0 send_seq=19726 receive_seq=19726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49997931 sd_pos=2525046 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.18 cputime=5851.480 memavail=3267444 print_time=19369.027 buffer_time=2.820 print_stall=0 extruder: target=210 temp=210.4 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65334.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57220400 bytes_read=9037791 bytes_retransmit=9 bytes_invalid=0 send_seq=1097089 receive_seq=1097089 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=14419 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118509 bytes_read=366918 bytes_retransmit=0 bytes_invalid=0 send_seq=19727 receive_seq=19727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49997916 sd_pos=2527585 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.18 cputime=5851.558 memavail=3267444 print_time=19369.940 buffer_time=2.732 print_stall=0 extruder: target=210 temp=210.2 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65335.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57229073 bytes_read=9038777 bytes_retransmit=9 bytes_invalid=0 send_seq=1097243 receive_seq=1097243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=17438 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118515 bytes_read=366934 bytes_retransmit=0 bytes_invalid=0 send_seq=19728 receive_seq=19728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49997924 sd_pos=2529674 heater_bed: target=60 temp=60.0 pwm=0.291 sysload=0.18 cputime=5851.644 memavail=3267444 print_time=19370.917 buffer_time=2.709 print_stall=0 extruder: target=210 temp=209.9 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65336.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57239703 bytes_read=9039905 bytes_retransmit=9 bytes_invalid=0 send_seq=1097425 receive_seq=1097425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=14087 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118521 bytes_read=366950 bytes_retransmit=0 bytes_invalid=0 send_seq=19729 receive_seq=19729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998907 adj=49997924 sd_pos=2532192 heater_bed: target=60 temp=60.0 pwm=0.023 sysload=0.18 cputime=5851.715 memavail=3267444 print_time=19371.774 buffer_time=2.565 print_stall=0 extruder: target=210 temp=209.8 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65337.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57248833 bytes_read=9040904 bytes_retransmit=9 bytes_invalid=0 send_seq=1097582 receive_seq=1097582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=15817 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=118527 bytes_read=366979 bytes_retransmit=0 bytes_invalid=0 send_seq=19730 receive_seq=19730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997951 sd_pos=2534058 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.18 cputime=5851.864 memavail=3266688 print_time=19372.658 buffer_time=2.448 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65338.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57260345 bytes_read=9042097 bytes_retransmit=9 bytes_invalid=0 send_seq=1097778 receive_seq=1097778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=9117 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=118533 bytes_read=366995 bytes_retransmit=0 bytes_invalid=0 send_seq=19731 receive_seq=19731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998913 adj=49998005 sd_pos=2534204 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.16 cputime=5852.009 memavail=3265972 print_time=19373.348 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65339.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57270310 bytes_read=9043179 bytes_retransmit=9 bytes_invalid=0 send_seq=1097954 receive_seq=1097954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3951 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=118539 bytes_read=367011 bytes_retransmit=0 bytes_invalid=0 send_seq=19732 receive_seq=19732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998912 adj=49998004 sd_pos=2534555 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.16 cputime=5852.229 memavail=3265732 print_time=19374.529 buffer_time=2.318 print_stall=0 extruder: target=210 temp=209.6 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65340.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57278783 bytes_read=9044146 bytes_retransmit=9 bytes_invalid=0 send_seq=1098104 receive_seq=1098104 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=251 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=118545 bytes_read=367027 bytes_retransmit=0 bytes_invalid=0 send_seq=19733 receive_seq=19733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997997 sd_pos=2534682 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.16 cputime=5852.401 memavail=3265732 print_time=19375.387 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.8 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65341.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57282327 bytes_read=9044728 bytes_retransmit=9 bytes_invalid=0 send_seq=1098174 receive_seq=1098174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=118551 bytes_read=367043 bytes_retransmit=0 bytes_invalid=0 send_seq=19734 receive_seq=19734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997790 sd_pos=2535059 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.16 cputime=5852.571 memavail=3265732 print_time=19376.284 buffer_time=2.072 print_stall=0 extruder: target=210 temp=210.1 pwm=0.363
Stats 65342.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57287252 bytes_read=9045350 bytes_retransmit=9 bytes_invalid=0 send_seq=1098258 receive_seq=1098258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=775 freq=400007764 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118557 bytes_read=367072 bytes_retransmit=0 bytes_invalid=0 send_seq=19735 receive_seq=19735 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998917 adj=49997806 sd_pos=2535201 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.16 cputime=5852.872 memavail=3265732 print_time=19377.316 buffer_time=2.104 print_stall=0 extruder: target=210 temp=210.3 pwm=0.307
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65343.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57290958 bytes_read=9045932 bytes_retransmit=9 bytes_invalid=0 send_seq=1098331 receive_seq=1098331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=8441 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118563 bytes_read=367088 bytes_retransmit=0 bytes_invalid=0 send_seq=19736 receive_seq=19736 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997877 sd_pos=2538809 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.23 cputime=5852.985 memavail=3265728 print_time=19378.762 buffer_time=2.549 print_stall=0 extruder: target=210 temp=210.4 pwm=0.307
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65344.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57296972 bytes_read=9046708 bytes_retransmit=9 bytes_invalid=0 send_seq=1098443 receive_seq=1098443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12158 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118569 bytes_read=367104 bytes_retransmit=0 bytes_invalid=0 send_seq=19737 receive_seq=19737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998914 adj=49997922 sd_pos=2540946 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.23 cputime=5853.060 memavail=3265728 print_time=19379.629 buffer_time=2.415 print_stall=0 extruder: target=210 temp=210.4 pwm=0.307
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65345.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57304871 bytes_read=9047620 bytes_retransmit=9 bytes_invalid=0 send_seq=1098585 receive_seq=1098585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=12975 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118575 bytes_read=367120 bytes_retransmit=0 bytes_invalid=0 send_seq=19738 receive_seq=19738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998914 adj=49997917 sd_pos=2543531 heater_bed: target=60 temp=60.0 pwm=0.353 sysload=0.23 cputime=5853.138 memavail=3265728 print_time=19380.563 buffer_time=2.349 print_stall=0 extruder: target=210 temp=210.3 pwm=0.307
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65346.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57316114 bytes_read=9048788 bytes_retransmit=9 bytes_invalid=0 send_seq=1098772 receive_seq=1098772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=13067 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118581 bytes_read=367136 bytes_retransmit=0 bytes_invalid=0 send_seq=19739 receive_seq=19739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998913 adj=49997931 sd_pos=2546882 heater_bed: target=60 temp=60.0 pwm=0.022 sysload=0.23 cputime=5853.228 memavail=3265728 print_time=19381.585 buffer_time=2.370 print_stall=0 extruder: target=210 temp=210.2 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65347.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57325080 bytes_read=9049794 bytes_retransmit=9 bytes_invalid=0 send_seq=1098930 receive_seq=1098930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=15121 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118587 bytes_read=367165 bytes_retransmit=0 bytes_invalid=0 send_seq=19740 receive_seq=19740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998914 adj=49997961 sd_pos=2549907 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.23 cputime=5853.314 memavail=3265728 print_time=19382.645 buffer_time=2.429 print_stall=0 extruder: target=210 temp=209.9 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65348.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57336883 bytes_read=9051022 bytes_retransmit=9 bytes_invalid=0 send_seq=1099136 receive_seq=1099136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=12743 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118593 bytes_read=367181 bytes_retransmit=0 bytes_invalid=0 send_seq=19741 receive_seq=19741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998917 adj=49997951 sd_pos=2552009 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.21 cputime=5853.460 memavail=3264732 print_time=19383.536 buffer_time=2.319 print_stall=0 extruder: target=210 temp=209.8 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65349.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57346329 bytes_read=9052037 bytes_retransmit=9 bytes_invalid=0 send_seq=1099296 receive_seq=1099296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=12316 freq=400007719 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118599 bytes_read=367197 bytes_retransmit=0 bytes_invalid=0 send_seq=19742 receive_seq=19742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997953 sd_pos=2554548 heater_bed: target=60 temp=60.0 pwm=0.006 sysload=0.21 cputime=5853.536 memavail=3264732 print_time=19384.442 buffer_time=2.223 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65350.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57357913 bytes_read=9053253 bytes_retransmit=9 bytes_invalid=0 send_seq=1099496 receive_seq=1099496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=10227 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118605 bytes_read=367213 bytes_retransmit=0 bytes_invalid=0 send_seq=19743 receive_seq=19743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997967 sd_pos=2555925 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.21 cputime=5853.674 memavail=3264480 print_time=19385.437 buffer_time=2.218 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
Stats 65351.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57367333 bytes_read=9054291 bytes_retransmit=9 bytes_invalid=0 send_seq=1099660 receive_seq=1099660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=5222 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118611 bytes_read=367229 bytes_retransmit=0 bytes_invalid=0 send_seq=19744 receive_seq=19744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997836 sd_pos=2556027 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.21 cputime=5853.890 memavail=3262720 print_time=19386.472 buffer_time=2.237 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65352.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57377342 bytes_read=9055367 bytes_retransmit=9 bytes_invalid=0 send_seq=1099829 receive_seq=1099829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=101 freq=400007783 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118617 bytes_read=367258 bytes_retransmit=0 bytes_invalid=0 send_seq=19745 receive_seq=19745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997922 sd_pos=2556324 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.21 cputime=5854.080 memavail=3262720 print_time=19387.351 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.7 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65353.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57380899 bytes_read=9055869 bytes_retransmit=9 bytes_invalid=0 send_seq=1099889 receive_seq=1099889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1506 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118623 bytes_read=367274 bytes_retransmit=0 bytes_invalid=0 send_seq=19746 receive_seq=19746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997917 sd_pos=2556690 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.20 cputime=5854.333 memavail=3262720 print_time=19388.494 buffer_time=2.258 print_stall=0 extruder: target=210 temp=209.9 pwm=0.365
Stats 65354.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57385873 bytes_read=9056516 bytes_retransmit=9 bytes_invalid=0 send_seq=1099978 receive_seq=1099978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=847 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118629 bytes_read=367290 bytes_retransmit=0 bytes_invalid=0 send_seq=19747 receive_seq=19747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997934 sd_pos=2556826 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.20 cputime=5854.545 memavail=3262720 print_time=19389.304 buffer_time=2.067 print_stall=0 extruder: target=210 temp=210.2 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65355.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57389739 bytes_read=9057082 bytes_retransmit=9 bytes_invalid=0 send_seq=1100045 receive_seq=1100045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=5464 freq=400007727 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118635 bytes_read=367306 bytes_retransmit=0 bytes_invalid=0 send_seq=19748 receive_seq=19748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997956 sd_pos=2559425 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.20 cputime=5854.660 memavail=3262480 print_time=19390.528 buffer_time=2.291 print_stall=0 extruder: target=210 temp=210.4 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65356.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=57395732 bytes_read=9057855 bytes_retransmit=9 bytes_invalid=0 send_seq=1100156 receive_seq=1100156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=12961 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118641 bytes_read=367322 bytes_retransmit=0 bytes_invalid=0 send_seq=19749 receive_seq=19749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997979 sd_pos=2562021 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.20 cputime=5854.746 memavail=3262228 print_time=19391.728 buffer_time=2.490 print_stall=0 extruder: target=210 temp=210.4 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65357.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=57403256 bytes_read=9058697 bytes_retransmit=9 bytes_invalid=0 send_seq=1100284 receive_seq=1100284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=11906 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118647 bytes_read=367351 bytes_retransmit=0 bytes_invalid=0 send_seq=19750 receive_seq=19750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997996 sd_pos=2564445 heater_bed: target=60 temp=60.0 pwm=0.021 sysload=0.20 cputime=5854.806 memavail=3267540 print_time=19392.514 buffer_time=2.276 print_stall=0 extruder: target=210 temp=210.3 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65358.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=57413941 bytes_read=9059853 bytes_retransmit=9 bytes_invalid=0 send_seq=1100470 receive_seq=1100469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=14369 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118653 bytes_read=367367 bytes_retransmit=0 bytes_invalid=0 send_seq=19751 receive_seq=19751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49998004 sd_pos=2567227 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.18 cputime=5854.913 memavail=3267076 print_time=19393.672 buffer_time=2.433 print_stall=0 extruder: target=210 temp=210.0 pwm=0.347
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65359.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=57424019 bytes_read=9060936 bytes_retransmit=9 bytes_invalid=0 send_seq=1100646 receive_seq=1100646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=11524 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118659 bytes_read=367383 bytes_retransmit=0 bytes_invalid=0 send_seq=19752 receive_seq=19752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49998008 sd_pos=2569616 heater_bed: target=60 temp=60.0 pwm=0.196 sysload=0.18 cputime=5855.035 memavail=3267076 print_time=19394.547 buffer_time=2.308 print_stall=0 extruder: target=210 temp=209.8 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65360.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=57434210 bytes_read=9061988 bytes_retransmit=9 bytes_invalid=0 send_seq=1100816 receive_seq=1100816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=13159 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118665 bytes_read=367399 bytes_retransmit=0 bytes_invalid=0 send_seq=19753 receive_seq=19753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49998027 sd_pos=2572141 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.18 cputime=5855.127 memavail=3267076 print_time=19395.665 buffer_time=2.425 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65361.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57444075 bytes_read=9063090 bytes_retransmit=9 bytes_invalid=0 send_seq=1100987 receive_seq=1100987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9826 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=118671 bytes_read=367415 bytes_retransmit=0 bytes_invalid=0 send_seq=19754 receive_seq=19754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49998026 sd_pos=2574481 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.18 cputime=5855.194 memavail=3267080 print_time=19396.442 buffer_time=2.201 print_stall=0 extruder: target=210 temp=209.5 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65362.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57453777 bytes_read=9064152 bytes_retransmit=9 bytes_invalid=0 send_seq=1101159 receive_seq=1101159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=12350 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118677 bytes_read=367444 bytes_retransmit=0 bytes_invalid=0 send_seq=19755 receive_seq=19755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49998021 sd_pos=2577203 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.18 cputime=5855.288 memavail=3267080 print_time=19397.603 buffer_time=2.362 print_stall=0 extruder: target=210 temp=209.5 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65363.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57463404 bytes_read=9065230 bytes_retransmit=9 bytes_invalid=0 send_seq=1101329 receive_seq=1101329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8759 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118689 bytes_read=367476 bytes_retransmit=0 bytes_invalid=0 send_seq=19757 receive_seq=19757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49998026 sd_pos=2577484 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.16 cputime=5855.486 memavail=3266840 print_time=19398.571 buffer_time=2.288 print_stall=0 extruder: target=210 temp=209.6 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65364.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57473416 bytes_read=9066331 bytes_retransmit=9 bytes_invalid=0 send_seq=1101506 receive_seq=1101506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2695 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118695 bytes_read=367492 bytes_retransmit=0 bytes_invalid=0 send_seq=19758 receive_seq=19758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49998038 sd_pos=2577738 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.16 cputime=5855.761 memavail=3265332 print_time=19399.499 buffer_time=2.216 print_stall=0 extruder: target=210 temp=209.9 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65365.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57480741 bytes_read=9067143 bytes_retransmit=9 bytes_invalid=0 send_seq=1101628 receive_seq=1101628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=366 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118701 bytes_read=367508 bytes_retransmit=0 bytes_invalid=0 send_seq=19759 receive_seq=19759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49998015 sd_pos=2577866 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.16 cputime=5855.935 memavail=3265332 print_time=19400.420 buffer_time=2.135 print_stall=0 extruder: target=210 temp=210.1 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65366.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57484470 bytes_read=9067721 bytes_retransmit=9 bytes_invalid=0 send_seq=1101697 receive_seq=1101697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=24 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=118707 bytes_read=367524 bytes_retransmit=0 bytes_invalid=0 send_seq=19760 receive_seq=19760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997987 sd_pos=2578248 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.16 cputime=5856.111 memavail=3265332 print_time=19401.312 buffer_time=2.027 print_stall=0 extruder: target=210 temp=210.5 pwm=0.311
Stats 65367.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57489680 bytes_read=9068427 bytes_retransmit=9 bytes_invalid=0 send_seq=1101795 receive_seq=1101795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=439 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118713 bytes_read=367553 bytes_retransmit=0 bytes_invalid=0 send_seq=19761 receive_seq=19761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49998012 sd_pos=2578349 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.16 cputime=5856.373 memavail=3265080 print_time=19402.351 buffer_time=2.066 print_stall=0 extruder: target=210 temp=210.6 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65368.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57493340 bytes_read=9068944 bytes_retransmit=9 bytes_invalid=0 send_seq=1101858 receive_seq=1101858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=4597 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118719 bytes_read=367569 bytes_retransmit=0 bytes_invalid=0 send_seq=19762 receive_seq=19762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49998019 sd_pos=2581040 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.15 cputime=5856.471 memavail=3265084 print_time=19403.439 buffer_time=2.153 print_stall=0 extruder: target=210 temp=210.7 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65369.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57499116 bytes_read=9069695 bytes_retransmit=9 bytes_invalid=0 send_seq=1101965 receive_seq=1101965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=10286 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118725 bytes_read=367585 bytes_retransmit=0 bytes_invalid=0 send_seq=19763 receive_seq=19763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997986 sd_pos=2583276 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.15 cputime=5856.564 memavail=3264832 print_time=19404.537 buffer_time=2.250 print_stall=0 extruder: target=210 temp=210.7 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65370.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57507111 bytes_read=9070623 bytes_retransmit=9 bytes_invalid=0 send_seq=1102108 receive_seq=1102108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=20705 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118731 bytes_read=367601 bytes_retransmit=0 bytes_invalid=0 send_seq=19764 receive_seq=19764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997993 sd_pos=2588627 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.15 cputime=5856.712 memavail=3264836 print_time=19406.504 buffer_time=3.217 print_stall=0 extruder: target=210 temp=210.4 pwm=0.350
Stats 65371.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57517295 bytes_read=9071721 bytes_retransmit=9 bytes_invalid=0 send_seq=1102284 receive_seq=1102284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=11544 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118737 bytes_read=367617 bytes_retransmit=0 bytes_invalid=0 send_seq=19765 receive_seq=19765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997928 sd_pos=2588627 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.15 cputime=5856.756 memavail=3265088 print_time=19406.504 buffer_time=2.216 print_stall=0 extruder: target=210 temp=210.2 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65372.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57526433 bytes_read=9072748 bytes_retransmit=9 bytes_invalid=0 send_seq=1102446 receive_seq=1102446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=20193 freq=400007740 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118743 bytes_read=367646 bytes_retransmit=0 bytes_invalid=0 send_seq=19766 receive_seq=19766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997902 sd_pos=2593475 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.15 cputime=5856.873 memavail=3264336 print_time=19408.334 buffer_time=3.046 print_stall=0 extruder: target=210 temp=210.0 pwm=0.410
Stats 65373.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57537433 bytes_read=9073889 bytes_retransmit=9 bytes_invalid=0 send_seq=1102631 receive_seq=1102631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=10241 freq=400007727 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118749 bytes_read=367662 bytes_retransmit=0 bytes_invalid=0 send_seq=19767 receive_seq=19767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997867 sd_pos=2593475 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5856.920 memavail=3264336 print_time=19408.334 buffer_time=2.045 print_stall=0 extruder: target=210 temp=209.8 pwm=0.410
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65374.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57546081 bytes_read=9074861 bytes_retransmit=9 bytes_invalid=0 send_seq=1102785 receive_seq=1102785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=20307 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118755 bytes_read=367678 bytes_retransmit=0 bytes_invalid=0 send_seq=19768 receive_seq=19768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997877 sd_pos=2598483 heater_bed: target=60 temp=60.0 pwm=0.295 sysload=0.22 cputime=5857.045 memavail=3264336 print_time=19410.312 buffer_time=3.022 print_stall=0 extruder: target=210 temp=209.7 pwm=0.410
Stats 65375.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57558070 bytes_read=9076123 bytes_retransmit=9 bytes_invalid=0 send_seq=1102994 receive_seq=1102994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=9541 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118761 bytes_read=367694 bytes_retransmit=0 bytes_invalid=0 send_seq=19769 receive_seq=19769 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997922 sd_pos=2598483 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.22 cputime=5857.124 memavail=3264588 print_time=19410.312 buffer_time=2.021 print_stall=0 extruder: target=210 temp=209.7 pwm=0.410
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65376.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57566097 bytes_read=9077065 bytes_retransmit=9 bytes_invalid=0 send_seq=1103136 receive_seq=1103136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=7444 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118767 bytes_read=367710 bytes_retransmit=0 bytes_invalid=0 send_seq=19770 receive_seq=19770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997967 sd_pos=2598685 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.22 cputime=5857.436 memavail=3262824 print_time=19411.479 buffer_time=2.187 print_stall=0 extruder: target=210 temp=209.8 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65377.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57577488 bytes_read=9078257 bytes_retransmit=9 bytes_invalid=0 send_seq=1103334 receive_seq=1103334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1900 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118773 bytes_read=367739 bytes_retransmit=0 bytes_invalid=0 send_seq=19771 receive_seq=19771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997970 sd_pos=2599092 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.22 cputime=5857.630 memavail=3263016 print_time=19412.514 buffer_time=2.221 print_stall=0 extruder: target=210 temp=209.9 pwm=0.358
Stats 65378.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57582563 bytes_read=9078919 bytes_retransmit=9 bytes_invalid=0 send_seq=1103423 receive_seq=1103423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=549 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118779 bytes_read=367755 bytes_retransmit=0 bytes_invalid=0 send_seq=19772 receive_seq=19772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997971 sd_pos=2599182 heater_bed: target=60 temp=60.0 pwm=0.248 sysload=0.20 cputime=5857.832 memavail=3263080 print_time=19413.515 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.1 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65379.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57587209 bytes_read=9079570 bytes_retransmit=9 bytes_invalid=0 send_seq=1103510 receive_seq=1103510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118785 bytes_read=367770 bytes_retransmit=0 bytes_invalid=0 send_seq=19773 receive_seq=19773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997991 sd_pos=2599577 heater_bed: target=60 temp=60.0 pwm=0.271 sysload=0.20 cputime=5858.031 memavail=3263080 print_time=19414.335 buffer_time=2.030 print_stall=0 extruder: target=210 temp=210.4 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65380.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57591371 bytes_read=9080124 bytes_retransmit=9 bytes_invalid=0 send_seq=1103581 receive_seq=1103581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2614 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118791 bytes_read=367785 bytes_retransmit=0 bytes_invalid=0 send_seq=19774 receive_seq=19774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997990 sd_pos=2600484 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.20 cputime=5858.229 memavail=3263080 print_time=19415.505 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65381.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57596209 bytes_read=9080815 bytes_retransmit=9 bytes_invalid=0 send_seq=1103673 receive_seq=1103673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=14401 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118797 bytes_read=367800 bytes_retransmit=0 bytes_invalid=0 send_seq=19775 receive_seq=19775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997971 sd_pos=2605069 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.20 cputime=5858.391 memavail=3263080 print_time=19417.287 buffer_time=2.981 print_stall=0 extruder: target=210 temp=210.5 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65382.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57602402 bytes_read=9081601 bytes_retransmit=9 bytes_invalid=0 send_seq=1103787 receive_seq=1103787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=13107 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=118803 bytes_read=367815 bytes_retransmit=0 bytes_invalid=0 send_seq=19776 receive_seq=19776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997958 sd_pos=2607300 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.20 cputime=5858.446 memavail=3263080 print_time=19417.852 buffer_time=2.544 print_stall=0 extruder: target=210 temp=210.4 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65383.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57611571 bytes_read=9082618 bytes_retransmit=9 bytes_invalid=0 send_seq=1103950 receive_seq=1103950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=16169 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118809 bytes_read=367843 bytes_retransmit=0 bytes_invalid=0 send_seq=19777 receive_seq=19777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997957 sd_pos=2609977 heater_bed: target=60 temp=60.0 pwm=0.274 sysload=0.27 cputime=5858.540 memavail=3263080 print_time=19418.984 buffer_time=2.676 print_stall=0 extruder: target=210 temp=210.3 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65384.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57622054 bytes_read=9083755 bytes_retransmit=9 bytes_invalid=0 send_seq=1104134 receive_seq=1104134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=12916 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118815 bytes_read=367859 bytes_retransmit=0 bytes_invalid=0 send_seq=19778 receive_seq=19778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997942 sd_pos=2612314 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.27 cputime=5858.616 memavail=3263080 print_time=19419.857 buffer_time=2.548 print_stall=0 extruder: target=210 temp=210.0 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65385.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57631124 bytes_read=9084776 bytes_retransmit=9 bytes_invalid=0 send_seq=1104295 receive_seq=1104295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=18070 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118821 bytes_read=367875 bytes_retransmit=0 bytes_invalid=0 send_seq=19779 receive_seq=19779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997942 sd_pos=2615609 heater_bed: target=60 temp=60.0 pwm=0.256 sysload=0.27 cputime=5858.705 memavail=3263080 print_time=19421.267 buffer_time=2.958 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65386.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57641644 bytes_read=9085924 bytes_retransmit=9 bytes_invalid=0 send_seq=1104481 receive_seq=1104481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=13837 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118827 bytes_read=367891 bytes_retransmit=0 bytes_invalid=0 send_seq=19780 receive_seq=19780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997940 sd_pos=2617606 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5858.771 memavail=3263084 print_time=19421.924 buffer_time=2.614 print_stall=0 extruder: target=210 temp=209.5 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65387.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57650298 bytes_read=9086911 bytes_retransmit=9 bytes_invalid=0 send_seq=1104635 receive_seq=1104635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=16305 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=118833 bytes_read=367907 bytes_retransmit=0 bytes_invalid=0 send_seq=19781 receive_seq=19781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997945 sd_pos=2620276 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.27 cputime=5858.905 memavail=3263340 print_time=19423.117 buffer_time=2.806 print_stall=0 extruder: target=210 temp=209.4 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65388.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57661505 bytes_read=9088102 bytes_retransmit=9 bytes_invalid=0 send_seq=1104830 receive_seq=1104830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12682 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=118839 bytes_read=367936 bytes_retransmit=0 bytes_invalid=0 send_seq=19782 receive_seq=19782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997980 sd_pos=2621695 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.24 cputime=5858.993 memavail=3263348 print_time=19423.797 buffer_time=2.486 print_stall=0 extruder: target=210 temp=209.4 pwm=0.385
Stats 65390.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57669759 bytes_read=9089049 bytes_retransmit=9 bytes_invalid=0 send_seq=1104979 receive_seq=1104979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=8291 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=118845 bytes_read=367952 bytes_retransmit=0 bytes_invalid=0 send_seq=19783 receive_seq=19783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49998001 sd_pos=2621695 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.24 cputime=5859.158 memavail=3263352 print_time=19424.543 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.7 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65391.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57680618 bytes_read=9090230 bytes_retransmit=9 bytes_invalid=0 send_seq=1105169 receive_seq=1105169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1509 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=118851 bytes_read=367968 bytes_retransmit=0 bytes_invalid=0 send_seq=19784 receive_seq=19784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49998018 sd_pos=2622011 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.24 cputime=5859.343 memavail=3263352 print_time=19425.447 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.8 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65392.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57686977 bytes_read=9091012 bytes_retransmit=9 bytes_invalid=0 send_seq=1105283 receive_seq=1105283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=118857 bytes_read=367984 bytes_retransmit=0 bytes_invalid=0 send_seq=19785 receive_seq=19785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997988 sd_pos=2622197 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.24 cputime=5859.510 memavail=3263352 print_time=19426.351 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.1 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65393.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57690787 bytes_read=9091579 bytes_retransmit=9 bytes_invalid=0 send_seq=1105356 receive_seq=1105356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=977 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118863 bytes_read=368013 bytes_retransmit=0 bytes_invalid=0 send_seq=19786 receive_seq=19786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998924 adj=49997970 sd_pos=2622536 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.24 cputime=5859.770 memavail=3263352 print_time=19427.471 buffer_time=2.134 print_stall=0 extruder: target=210 temp=210.3 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65394.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57695760 bytes_read=9092250 bytes_retransmit=9 bytes_invalid=0 send_seq=1105444 receive_seq=1105444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2749 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118869 bytes_read=368029 bytes_retransmit=0 bytes_invalid=0 send_seq=19787 receive_seq=19787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997983 sd_pos=2623096 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.30 cputime=5860.076 memavail=3263352 print_time=19428.700 buffer_time=2.362 print_stall=0 extruder: target=210 temp=210.4 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65395.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57700237 bytes_read=9092877 bytes_retransmit=9 bytes_invalid=0 send_seq=1105529 receive_seq=1105529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=3918 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118875 bytes_read=368045 bytes_retransmit=0 bytes_invalid=0 send_seq=19788 receive_seq=19788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997994 sd_pos=2625463 heater_bed: target=60 temp=60.0 pwm=0.227 sysload=0.30 cputime=5860.131 memavail=3263352 print_time=19429.384 buffer_time=2.046 print_stall=0 extruder: target=210 temp=210.5 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65396.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57705560 bytes_read=9093529 bytes_retransmit=9 bytes_invalid=0 send_seq=1105619 receive_seq=1105619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=12556 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118881 bytes_read=368061 bytes_retransmit=0 bytes_invalid=0 send_seq=19789 receive_seq=19789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997989 sd_pos=2628480 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.30 cputime=5860.210 memavail=3263352 print_time=19430.796 buffer_time=2.457 print_stall=0 extruder: target=210 temp=210.5 pwm=0.299
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65397.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57713855 bytes_read=9094521 bytes_retransmit=9 bytes_invalid=0 send_seq=1105768 receive_seq=1105768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=10623 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118887 bytes_read=368077 bytes_retransmit=0 bytes_invalid=0 send_seq=19790 receive_seq=19790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997962 sd_pos=2630820 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.30 cputime=5860.275 memavail=3263352 print_time=19431.528 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.3 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65398.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57724219 bytes_read=9095633 bytes_retransmit=9 bytes_invalid=0 send_seq=1105950 receive_seq=1105950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=15507 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118893 bytes_read=368093 bytes_retransmit=0 bytes_invalid=0 send_seq=19791 receive_seq=19791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997969 sd_pos=2634445 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.30 cputime=5860.365 memavail=3262992 print_time=19433.019 buffer_time=2.678 print_stall=0 extruder: target=210 temp=210.1 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65399.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57733901 bytes_read=9096690 bytes_retransmit=9 bytes_invalid=0 send_seq=1106121 receive_seq=1106121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=12192 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118899 bytes_read=368122 bytes_retransmit=0 bytes_invalid=0 send_seq=19792 receive_seq=19792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997919 sd_pos=2636774 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.28 cputime=5860.465 memavail=3267024 print_time=19433.679 buffer_time=2.338 print_stall=0 extruder: target=210 temp=209.9 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65400.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57743982 bytes_read=9097806 bytes_retransmit=9 bytes_invalid=0 send_seq=1106298 receive_seq=1106298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=16366 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118905 bytes_read=368138 bytes_retransmit=0 bytes_invalid=0 send_seq=19793 receive_seq=19793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49997916 sd_pos=2639828 heater_bed: target=60 temp=60.0 pwm=0.234 sysload=0.28 cputime=5860.641 memavail=3266784 print_time=19434.985 buffer_time=2.643 print_stall=0 extruder: target=210 temp=209.7 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65401.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57754128 bytes_read=9098908 bytes_retransmit=9 bytes_invalid=0 send_seq=1106478 receive_seq=1106478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12687 freq=400007775 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118911 bytes_read=368154 bytes_retransmit=0 bytes_invalid=0 send_seq=19794 receive_seq=19794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997873 sd_pos=2641634 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.28 cputime=5860.706 memavail=3266784 print_time=19435.675 buffer_time=2.333 print_stall=0 extruder: target=210 temp=209.7 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65402.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57764072 bytes_read=9099961 bytes_retransmit=9 bytes_invalid=0 send_seq=1106645 receive_seq=1106645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=11719 freq=400007783 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118917 bytes_read=368170 bytes_retransmit=0 bytes_invalid=0 send_seq=19795 receive_seq=19795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997891 sd_pos=2644084 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.28 cputime=5860.779 memavail=3266784 print_time=19436.593 buffer_time=2.251 print_stall=0 extruder: target=210 temp=209.6 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65403.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57774942 bytes_read=9101142 bytes_retransmit=9 bytes_invalid=0 send_seq=1106836 receive_seq=1106836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=10082 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=118923 bytes_read=368186 bytes_retransmit=0 bytes_invalid=0 send_seq=19796 receive_seq=19796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997867 sd_pos=2645139 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.28 cputime=5860.877 memavail=3266784 print_time=19437.344 buffer_time=2.001 print_stall=0 extruder: target=210 temp=209.7 pwm=0.345
Stats 65404.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57783904 bytes_read=9102124 bytes_retransmit=9 bytes_invalid=0 send_seq=1106992 receive_seq=1106992 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=5913 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118929 bytes_read=368215 bytes_retransmit=0 bytes_invalid=0 send_seq=19797 receive_seq=19797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998922 adj=49997862 sd_pos=2645139 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.26 cputime=5861.086 memavail=3265020 print_time=19438.366 buffer_time=2.022 print_stall=0 extruder: target=210 temp=209.8 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65405.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57795464 bytes_read=9103316 bytes_retransmit=9 bytes_invalid=0 send_seq=1107187 receive_seq=1107187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=641 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118935 bytes_read=368231 bytes_retransmit=0 bytes_invalid=0 send_seq=19798 receive_seq=19798 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997889 sd_pos=2645550 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.26 cputime=5861.367 memavail=3265020 print_time=19439.593 buffer_time=2.209 print_stall=0 extruder: target=210 temp=210.0 pwm=0.345
Stats 65406.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57799052 bytes_read=9103877 bytes_retransmit=9 bytes_invalid=0 send_seq=1107256 receive_seq=1107256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=0 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118941 bytes_read=368247 bytes_retransmit=0 bytes_invalid=0 send_seq=19799 receive_seq=19799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997911 sd_pos=2645621 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.26 cputime=5861.523 memavail=3264280 print_time=19440.387 buffer_time=2.002 print_stall=0 extruder: target=210 temp=210.2 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65407.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57804328 bytes_read=9104570 bytes_retransmit=9 bytes_invalid=0 send_seq=1107351 receive_seq=1107351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=168 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118947 bytes_read=368263 bytes_retransmit=0 bytes_invalid=0 send_seq=19800 receive_seq=19800 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997919 sd_pos=2646076 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.26 cputime=5861.786 memavail=3264280 print_time=19441.456 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.5 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65408.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57808035 bytes_read=9105102 bytes_retransmit=9 bytes_invalid=0 send_seq=1107414 receive_seq=1107414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=6219 freq=400007727 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=118953 bytes_read=368279 bytes_retransmit=0 bytes_invalid=0 send_seq=19801 receive_seq=19801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997932 sd_pos=2648836 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.26 cputime=5861.947 memavail=3263776 print_time=19442.925 buffer_time=2.538 print_stall=0 extruder: target=210 temp=210.5 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65409.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57813288 bytes_read=9105773 bytes_retransmit=9 bytes_invalid=0 send_seq=1107505 receive_seq=1107505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=13984 freq=400007750 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118959 bytes_read=368308 bytes_retransmit=0 bytes_invalid=0 send_seq=19802 receive_seq=19802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998921 adj=49997971 sd_pos=2651521 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.24 cputime=5862.039 memavail=3263780 print_time=19444.099 buffer_time=2.712 print_stall=0 extruder: target=210 temp=210.4 pwm=0.338
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65410.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57820268 bytes_read=9106605 bytes_retransmit=9 bytes_invalid=0 send_seq=1107631 receive_seq=1107631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=12949 freq=400007744 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118965 bytes_read=368324 bytes_retransmit=0 bytes_invalid=0 send_seq=19803 receive_seq=19803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997951 sd_pos=2653822 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.24 cputime=5862.106 memavail=3263780 print_time=19444.779 buffer_time=2.391 print_stall=0 extruder: target=210 temp=210.1 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65411.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57829852 bytes_read=9107617 bytes_retransmit=9 bytes_invalid=0 send_seq=1107790 receive_seq=1107790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=16879 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118971 bytes_read=368340 bytes_retransmit=0 bytes_invalid=0 send_seq=19804 receive_seq=19804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997939 sd_pos=2656503 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.24 cputime=5862.274 memavail=3263780 print_time=19446.036 buffer_time=2.646 print_stall=0 extruder: target=210 temp=209.8 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65412.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57840795 bytes_read=9108789 bytes_retransmit=9 bytes_invalid=0 send_seq=1107978 receive_seq=1107978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=10881 freq=400007725 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118977 bytes_read=368356 bytes_retransmit=0 bytes_invalid=0 send_seq=19805 receive_seq=19805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49998037 sd_pos=2657532 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.24 cputime=5862.405 memavail=3263780 print_time=19446.546 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.6 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65413.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57850031 bytes_read=9109774 bytes_retransmit=9 bytes_invalid=0 send_seq=1108135 receive_seq=1108135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=19554 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=118983 bytes_read=368372 bytes_retransmit=0 bytes_invalid=0 send_seq=19806 receive_seq=19806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49998109 sd_pos=2662433 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.24 cputime=5862.620 memavail=3263780 print_time=19448.380 buffer_time=2.990 print_stall=0 extruder: target=210 temp=209.4 pwm=0.392
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65414.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57860994 bytes_read=9110943 bytes_retransmit=9 bytes_invalid=0 send_seq=1108326 receive_seq=1108326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=14871 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=118989 bytes_read=368401 bytes_retransmit=0 bytes_invalid=0 send_seq=19807 receive_seq=19807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49998097 sd_pos=2664498 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.22 cputime=5862.688 memavail=3263780 print_time=19449.060 buffer_time=2.660 print_stall=0 extruder: target=210 temp=209.3 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65415.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57869749 bytes_read=9111934 bytes_retransmit=9 bytes_invalid=0 send_seq=1108481 receive_seq=1108481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=19247 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=118995 bytes_read=368417 bytes_retransmit=0 bytes_invalid=0 send_seq=19808 receive_seq=19808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49998078 sd_pos=2667312 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.22 cputime=5862.785 memavail=3263780 print_time=19450.319 buffer_time=2.919 print_stall=0 extruder: target=210 temp=209.3 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65416.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57881623 bytes_read=9113171 bytes_retransmit=9 bytes_invalid=0 send_seq=1108688 receive_seq=1108688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=10617 freq=400007709 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119001 bytes_read=368433 bytes_retransmit=0 bytes_invalid=0 send_seq=19809 receive_seq=19809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998931 adj=49998038 sd_pos=2667590 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.22 cputime=5862.856 memavail=3263780 print_time=19450.565 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.4 pwm=0.379
Stats 65417.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57890156 bytes_read=9114164 bytes_retransmit=9 bytes_invalid=0 send_seq=1108840 receive_seq=1108840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6471 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119007 bytes_read=368449 bytes_retransmit=0 bytes_invalid=0 send_seq=19810 receive_seq=19810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998023 sd_pos=2667634 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.22 cputime=5863.040 memavail=3263276 print_time=19451.425 buffer_time=2.023 print_stall=0 extruder: target=210 temp=209.7 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65418.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57901204 bytes_read=9115345 bytes_retransmit=9 bytes_invalid=0 send_seq=1109033 receive_seq=1109033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=1616 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119013 bytes_read=368465 bytes_retransmit=0 bytes_invalid=0 send_seq=19811 receive_seq=19811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998016 sd_pos=2667994 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.22 cputime=5863.277 memavail=3262772 print_time=19452.649 buffer_time=2.246 print_stall=0 extruder: target=210 temp=210.0 pwm=0.323
Stats 65419.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57906166 bytes_read=9116012 bytes_retransmit=9 bytes_invalid=0 send_seq=1109126 receive_seq=1109126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=312 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119019 bytes_read=368494 bytes_retransmit=0 bytes_invalid=0 send_seq=19812 receive_seq=19812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998060 sd_pos=2668083 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.20 cputime=5863.474 memavail=3262784 print_time=19453.650 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.3 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65420.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57910959 bytes_read=9116693 bytes_retransmit=9 bytes_invalid=0 send_seq=1109216 receive_seq=1109216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=2249 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119025 bytes_read=368510 bytes_retransmit=0 bytes_invalid=0 send_seq=19813 receive_seq=19813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998050 sd_pos=2675169 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.20 cputime=5863.624 memavail=3262784 print_time=19454.674 buffer_time=2.233 print_stall=0 extruder: target=210 temp=210.6 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65421.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=57914959 bytes_read=9117265 bytes_retransmit=9 bytes_invalid=0 send_seq=1109291 receive_seq=1109290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9568 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119031 bytes_read=368526 bytes_retransmit=0 bytes_invalid=0 send_seq=19814 receive_seq=19814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49998023 sd_pos=2685233 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.20 cputime=5863.762 memavail=3262788 print_time=19456.146 buffer_time=2.704 print_stall=0 extruder: target=210 temp=210.8 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65422.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57920911 bytes_read=9118044 bytes_retransmit=9 bytes_invalid=0 send_seq=1109400 receive_seq=1109400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16434 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119043 bytes_read=368558 bytes_retransmit=0 bytes_invalid=0 send_seq=19816 receive_seq=19816 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49998006 sd_pos=2688037 heater_bed: target=60 temp=60.0 pwm=0.003 sysload=0.20 cputime=5863.858 memavail=3262788 print_time=19457.372 buffer_time=2.929 print_stall=0 extruder: target=210 temp=210.7 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65423.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57929303 bytes_read=9119025 bytes_retransmit=9 bytes_invalid=0 send_seq=1109550 receive_seq=1109550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14386 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119049 bytes_read=368574 bytes_retransmit=0 bytes_invalid=0 send_seq=19817 receive_seq=19817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998931 adj=49998013 sd_pos=2689810 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.20 cputime=5863.945 memavail=3262788 print_time=19458.053 buffer_time=2.610 print_stall=0 extruder: target=210 temp=210.5 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65424.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57937855 bytes_read=9119942 bytes_retransmit=9 bytes_invalid=0 send_seq=1109695 receive_seq=1109694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=15908 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119055 bytes_read=368603 bytes_retransmit=0 bytes_invalid=0 send_seq=19818 receive_seq=19818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998065 sd_pos=2692313 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.18 cputime=5864.093 memavail=3262788 print_time=19459.042 buffer_time=2.599 print_stall=0 extruder: target=210 temp=210.2 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65425.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57949530 bytes_read=9121164 bytes_retransmit=9 bytes_invalid=0 send_seq=1109898 receive_seq=1109898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=13502 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119061 bytes_read=368619 bytes_retransmit=0 bytes_invalid=0 send_seq=19819 receive_seq=19819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998047 sd_pos=2694714 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.18 cputime=5864.176 memavail=3262788 print_time=19459.907 buffer_time=2.463 print_stall=0 extruder: target=210 temp=209.9 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65426.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=57957901 bytes_read=9122095 bytes_retransmit=9 bytes_invalid=0 send_seq=1110038 receive_seq=1110038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=14433 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119067 bytes_read=368635 bytes_retransmit=0 bytes_invalid=0 send_seq=19820 receive_seq=19820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998931 adj=49997978 sd_pos=2697538 heater_bed: target=60 temp=60.0 pwm=0.215 sysload=0.18 cputime=5864.251 memavail=3262788 print_time=19460.905 buffer_time=2.460 print_stall=0 extruder: target=210 temp=209.6 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65427.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57970140 bytes_read=9123373 bytes_retransmit=9 bytes_invalid=0 send_seq=1110250 receive_seq=1110250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=12944 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119073 bytes_read=368651 bytes_retransmit=0 bytes_invalid=0 send_seq=19821 receive_seq=19821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998009 sd_pos=2699326 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.18 cputime=5864.335 memavail=3262788 print_time=19461.891 buffer_time=2.445 print_stall=0 extruder: target=210 temp=209.5 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65428.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57978117 bytes_read=9124280 bytes_retransmit=9 bytes_invalid=0 send_seq=1110391 receive_seq=1110391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=10141 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119079 bytes_read=368667 bytes_retransmit=0 bytes_invalid=0 send_seq=19822 receive_seq=19822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998005 sd_pos=2701262 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5864.393 memavail=3262536 print_time=19462.513 buffer_time=2.067 print_stall=0 extruder: target=210 temp=209.4 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65429.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57989750 bytes_read=9125521 bytes_retransmit=9 bytes_invalid=0 send_seq=1110593 receive_seq=1110593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=14626 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119085 bytes_read=368696 bytes_retransmit=0 bytes_invalid=0 send_seq=19823 receive_seq=19823 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49998005 sd_pos=2704549 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.17 cputime=5864.512 memavail=3262568 print_time=19463.973 buffer_time=2.526 print_stall=0 extruder: target=210 temp=209.4 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65430.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=57998339 bytes_read=9126483 bytes_retransmit=9 bytes_invalid=0 send_seq=1110745 receive_seq=1110745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=10773 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119091 bytes_read=368712 bytes_retransmit=0 bytes_invalid=0 send_seq=19824 receive_seq=19824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49998020 sd_pos=2704787 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.17 cputime=5864.719 memavail=3262568 print_time=19464.581 buffer_time=2.134 print_stall=0 extruder: target=210 temp=209.5 pwm=0.370
Stats 65431.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58009164 bytes_read=9127605 bytes_retransmit=9 bytes_invalid=0 send_seq=1110926 receive_seq=1110926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=4135 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119097 bytes_read=368728 bytes_retransmit=0 bytes_invalid=0 send_seq=19825 receive_seq=19825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49998019 sd_pos=2704876 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.17 cputime=5864.939 memavail=3262064 print_time=19465.582 buffer_time=2.134 print_stall=0 extruder: target=210 temp=209.7 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65432.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58018588 bytes_read=9128647 bytes_retransmit=9 bytes_invalid=0 send_seq=1111088 receive_seq=1111088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=472 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119103 bytes_read=368744 bytes_retransmit=0 bytes_invalid=0 send_seq=19826 receive_seq=19826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49998029 sd_pos=2705283 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.17 cputime=5865.110 memavail=3262064 print_time=19466.568 buffer_time=2.119 print_stall=0 extruder: target=210 temp=210.0 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65433.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58022144 bytes_read=9129154 bytes_retransmit=9 bytes_invalid=0 send_seq=1111149 receive_seq=1111149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1301 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119109 bytes_read=368760 bytes_retransmit=0 bytes_invalid=0 send_seq=19827 receive_seq=19827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49998012 sd_pos=2706272 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.17 cputime=5865.331 memavail=3261824 print_time=19467.744 buffer_time=2.294 print_stall=0 extruder: target=210 temp=210.2 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65434.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58027573 bytes_read=9129866 bytes_retransmit=9 bytes_invalid=0 send_seq=1111248 receive_seq=1111248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=4008 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=119115 bytes_read=368789 bytes_retransmit=0 bytes_invalid=0 send_seq=19828 receive_seq=19828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998938 adj=49998005 sd_pos=2720592 heater_bed: target=60 temp=60.0 pwm=0.268 sysload=0.24 cputime=5865.519 memavail=3261824 print_time=19468.797 buffer_time=2.346 print_stall=0 extruder: target=210 temp=210.4 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65435.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58031436 bytes_read=9130431 bytes_retransmit=9 bytes_invalid=0 send_seq=1111319 receive_seq=1111319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=6175 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=119121 bytes_read=368805 bytes_retransmit=0 bytes_invalid=0 send_seq=19829 receive_seq=19829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49998000 sd_pos=2722676 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.24 cputime=5865.578 memavail=3261824 print_time=19469.527 buffer_time=2.075 print_stall=0 extruder: target=210 temp=210.5 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65436.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58038720 bytes_read=9131268 bytes_retransmit=9 bytes_invalid=0 send_seq=1111446 receive_seq=1111446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=12121 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=119127 bytes_read=368821 bytes_retransmit=0 bytes_invalid=0 send_seq=19830 receive_seq=19830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49997983 sd_pos=2725845 heater_bed: target=60 temp=60.0 pwm=0.263 sysload=0.24 cputime=5865.710 memavail=3261824 print_time=19470.867 buffer_time=2.414 print_stall=0 extruder: target=210 temp=210.5 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65437.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58047272 bytes_read=9132241 bytes_retransmit=9 bytes_invalid=0 send_seq=1111594 receive_seq=1111594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=10301 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=119133 bytes_read=368837 bytes_retransmit=0 bytes_invalid=0 send_seq=19831 receive_seq=19831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997963 sd_pos=2727682 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.24 cputime=5865.775 memavail=3262080 print_time=19471.552 buffer_time=2.098 print_stall=0 extruder: target=210 temp=210.3 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65438.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58057339 bytes_read=9133347 bytes_retransmit=9 bytes_invalid=0 send_seq=1111772 receive_seq=1111772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=19798 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=119139 bytes_read=368853 bytes_retransmit=0 bytes_invalid=0 send_seq=19832 receive_seq=19832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997947 sd_pos=2733119 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.24 cputime=5865.899 memavail=3261812 print_time=19473.527 buffer_time=3.073 print_stall=0 extruder: target=210 temp=210.1 pwm=0.336
Stats 65439.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58067330 bytes_read=9134419 bytes_retransmit=9 bytes_invalid=0 send_seq=1111946 receive_seq=1111946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=10852 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119145 bytes_read=368882 bytes_retransmit=0 bytes_invalid=0 send_seq=19833 receive_seq=19833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49997994 sd_pos=2733119 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.22 cputime=5865.943 memavail=3261888 print_time=19473.527 buffer_time=2.072 print_stall=0 extruder: target=210 temp=209.9 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65440.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58076595 bytes_read=9135451 bytes_retransmit=9 bytes_invalid=0 send_seq=1112109 receive_seq=1112109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=21108 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119151 bytes_read=368898 bytes_retransmit=0 bytes_invalid=0 send_seq=19834 receive_seq=19834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997986 sd_pos=2737954 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.22 cputime=5866.072 memavail=3261888 print_time=19475.528 buffer_time=3.072 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
Stats 65441.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58088173 bytes_read=9136672 bytes_retransmit=9 bytes_invalid=0 send_seq=1112310 receive_seq=1112310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=10640 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119157 bytes_read=368914 bytes_retransmit=0 bytes_invalid=0 send_seq=19835 receive_seq=19835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49997877 sd_pos=2737954 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.22 cputime=5866.152 memavail=3261888 print_time=19475.528 buffer_time=2.071 print_stall=0 extruder: target=210 temp=209.5 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65442.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58097083 bytes_read=9137675 bytes_retransmit=9 bytes_invalid=0 send_seq=1112467 receive_seq=1112467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18753 freq=400007766 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119163 bytes_read=368930 bytes_retransmit=0 bytes_invalid=0 send_seq=19836 receive_seq=19836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997888 sd_pos=2742809 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.22 cputime=5866.354 memavail=3261888 print_time=19477.388 buffer_time=2.931 print_stall=0 extruder: target=210 temp=209.5 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65443.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58108878 bytes_read=9138877 bytes_retransmit=9 bytes_invalid=0 send_seq=1112664 receive_seq=1112664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=12373 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119169 bytes_read=368946 bytes_retransmit=0 bytes_invalid=0 send_seq=19837 receive_seq=19837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997899 sd_pos=2743690 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.22 cputime=5866.444 memavail=3261888 print_time=19477.805 buffer_time=2.346 print_stall=0 extruder: target=210 temp=209.5 pwm=0.403
Stats 65444.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58117108 bytes_read=9139783 bytes_retransmit=9 bytes_invalid=0 send_seq=1112802 receive_seq=1112802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=8257 freq=400007839 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119175 bytes_read=368975 bytes_retransmit=0 bytes_invalid=0 send_seq=19838 receive_seq=19838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49997886 sd_pos=2743690 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.20 cputime=5866.621 memavail=3261888 print_time=19478.697 buffer_time=2.206 print_stall=0 extruder: target=210 temp=209.7 pwm=0.389
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65445.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58128476 bytes_read=9140978 bytes_retransmit=9 bytes_invalid=0 send_seq=1113001 receive_seq=1113001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1691 freq=400007822 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119181 bytes_read=368991 bytes_retransmit=0 bytes_invalid=0 send_seq=19839 receive_seq=19839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49997775 sd_pos=2744150 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.20 cputime=5866.809 memavail=3262652 print_time=19479.568 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.9 pwm=0.389
Stats 65446.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58134515 bytes_read=9141742 bytes_retransmit=9 bytes_invalid=0 send_seq=1113111 receive_seq=1113111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=166 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119187 bytes_read=369007 bytes_retransmit=0 bytes_invalid=0 send_seq=19840 receive_seq=19840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49997789 sd_pos=2744194 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.20 cputime=5867.013 memavail=3262652 print_time=19480.660 buffer_time=2.168 print_stall=0 extruder: target=210 temp=210.0 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65447.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58139041 bytes_read=9142379 bytes_retransmit=9 bytes_invalid=0 send_seq=1113192 receive_seq=1113192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=818 freq=400007808 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119193 bytes_read=369023 bytes_retransmit=0 bytes_invalid=0 send_seq=19841 receive_seq=19841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997819 sd_pos=2750722 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.20 cputime=5867.185 memavail=3262652 print_time=19481.575 buffer_time=2.082 print_stall=0 extruder: target=210 temp=210.3 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65448.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58143147 bytes_read=9142926 bytes_retransmit=9 bytes_invalid=0 send_seq=1113261 receive_seq=1113261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=6786 freq=400007782 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119199 bytes_read=369039 bytes_retransmit=0 bytes_invalid=0 send_seq=19842 receive_seq=19842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997842 sd_pos=2760375 heater_bed: target=60 temp=60.0 pwm=0.002 sysload=0.20 cputime=5867.390 memavail=3262888 print_time=19482.923 buffer_time=2.429 print_stall=0 extruder: target=210 temp=210.4 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65449.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58148684 bytes_read=9143648 bytes_retransmit=9 bytes_invalid=0 send_seq=1113362 receive_seq=1113362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=6177 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119205 bytes_read=369068 bytes_retransmit=0 bytes_invalid=0 send_seq=19843 receive_seq=19843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997899 sd_pos=2762468 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.18 cputime=5867.446 memavail=3266616 print_time=19483.524 buffer_time=2.029 print_stall=0 extruder: target=210 temp=210.6 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65450.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58156722 bytes_read=9144579 bytes_retransmit=9 bytes_invalid=0 send_seq=1113505 receive_seq=1113505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=12791 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119211 bytes_read=369084 bytes_retransmit=0 bytes_invalid=0 send_seq=19844 receive_seq=19844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997919 sd_pos=2765470 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.18 cputime=5867.548 memavail=3266124 print_time=19484.894 buffer_time=2.399 print_stall=0 extruder: target=210 temp=210.5 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65451.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58164879 bytes_read=9145511 bytes_retransmit=9 bytes_invalid=0 send_seq=1113651 receive_seq=1113651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=10829 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119217 bytes_read=369100 bytes_retransmit=0 bytes_invalid=0 send_seq=19845 receive_seq=19845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49997922 sd_pos=2767585 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.18 cputime=5867.611 memavail=3265900 print_time=19485.607 buffer_time=2.112 print_stall=0 extruder: target=210 temp=210.3 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65452.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58176216 bytes_read=9146699 bytes_retransmit=9 bytes_invalid=0 send_seq=1113842 receive_seq=1113842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11806 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119223 bytes_read=369116 bytes_retransmit=0 bytes_invalid=0 send_seq=19846 receive_seq=19846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998924 adj=49997929 sd_pos=2770128 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.18 cputime=5867.719 memavail=3265900 print_time=19486.825 buffer_time=2.329 print_stall=0 extruder: target=210 temp=210.2 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65453.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58185417 bytes_read=9147735 bytes_retransmit=9 bytes_invalid=0 send_seq=1114006 receive_seq=1114006 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=13012 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119229 bytes_read=369132 bytes_retransmit=0 bytes_invalid=0 send_seq=19847 receive_seq=19847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997940 sd_pos=2773560 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.18 cputime=5867.868 memavail=3265900 print_time=19487.990 buffer_time=2.493 print_stall=0 extruder: target=210 temp=209.9 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65454.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58195246 bytes_read=9148802 bytes_retransmit=9 bytes_invalid=0 send_seq=1114179 receive_seq=1114179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=16154 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119235 bytes_read=369161 bytes_retransmit=0 bytes_invalid=0 send_seq=19848 receive_seq=19848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998931 adj=49997994 sd_pos=2776382 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.17 cputime=5868.057 memavail=3265900 print_time=19489.289 buffer_time=2.791 print_stall=0 extruder: target=210 temp=209.8 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65455.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58205427 bytes_read=9149874 bytes_retransmit=9 bytes_invalid=0 send_seq=1114350 receive_seq=1114350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=14793 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119241 bytes_read=369177 bytes_retransmit=0 bytes_invalid=0 send_seq=19849 receive_seq=19849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49997958 sd_pos=2779384 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.17 cputime=5868.130 memavail=3265900 print_time=19490.142 buffer_time=2.644 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65456.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58214161 bytes_read=9150866 bytes_retransmit=9 bytes_invalid=0 send_seq=1114506 receive_seq=1114506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=12386 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119247 bytes_read=369193 bytes_retransmit=0 bytes_invalid=0 send_seq=19850 receive_seq=19850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997958 sd_pos=2781234 heater_bed: target=60 temp=60.0 pwm=0.048 sysload=0.17 cputime=5868.197 memavail=3265900 print_time=19490.858 buffer_time=2.358 print_stall=0 extruder: target=210 temp=209.7 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65457.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58225933 bytes_read=9152109 bytes_retransmit=9 bytes_invalid=0 send_seq=1114711 receive_seq=1114711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=14274 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119253 bytes_read=369209 bytes_retransmit=0 bytes_invalid=0 send_seq=19851 receive_seq=19851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49997953 sd_pos=2784320 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.17 cputime=5868.307 memavail=3265900 print_time=19492.067 buffer_time=2.566 print_stall=0 extruder: target=210 temp=209.7 pwm=0.378
Stats 65458.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58234176 bytes_read=9153061 bytes_retransmit=9 bytes_invalid=0 send_seq=1114858 receive_seq=1114858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=9100 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119259 bytes_read=369225 bytes_retransmit=0 bytes_invalid=0 send_seq=19852 receive_seq=19852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997951 sd_pos=2784320 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.17 cputime=5868.433 memavail=3264656 print_time=19492.573 buffer_time=2.071 print_stall=0 extruder: target=210 temp=209.8 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65459.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58244811 bytes_read=9154212 bytes_retransmit=9 bytes_invalid=0 send_seq=1115045 receive_seq=1115045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3475 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119265 bytes_read=369254 bytes_retransmit=0 bytes_invalid=0 send_seq=19853 receive_seq=19853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997962 sd_pos=2784670 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.15 cputime=5868.714 memavail=3264656 print_time=19493.736 buffer_time=2.234 print_stall=0 extruder: target=210 temp=210.1 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65460.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58252832 bytes_read=9155129 bytes_retransmit=9 bytes_invalid=0 send_seq=1115188 receive_seq=1115188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=1195 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119271 bytes_read=369270 bytes_retransmit=0 bytes_invalid=0 send_seq=19854 receive_seq=19854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997968 sd_pos=2784938 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.15 cputime=5868.900 memavail=3264656 print_time=19494.711 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.4 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65461.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58256591 bytes_read=9155716 bytes_retransmit=9 bytes_invalid=0 send_seq=1115262 receive_seq=1115262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1014 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119277 bytes_read=369286 bytes_retransmit=0 bytes_invalid=0 send_seq=19855 receive_seq=19855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997990 sd_pos=2785168 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.15 cputime=5869.077 memavail=3264656 print_time=19495.650 buffer_time=2.145 print_stall=0 extruder: target=210 temp=210.5 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65462.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58262374 bytes_read=9156433 bytes_retransmit=9 bytes_invalid=0 send_seq=1115359 receive_seq=1115359 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=11970 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119283 bytes_read=369302 bytes_retransmit=0 bytes_invalid=0 send_seq=19856 receive_seq=19856 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49998064 sd_pos=2790318 heater_bed: target=60 temp=60.0 pwm=0.285 sysload=0.15 cputime=5869.186 memavail=3264156 print_time=19497.481 buffer_time=2.976 print_stall=0 extruder: target=210 temp=210.7 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65463.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58266331 bytes_read=9157020 bytes_retransmit=9 bytes_invalid=0 send_seq=1115436 receive_seq=1115436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=15727 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119289 bytes_read=369318 bytes_retransmit=0 bytes_invalid=0 send_seq=19857 receive_seq=19857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49997986 sd_pos=2792366 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.15 cputime=5869.248 memavail=3264304 print_time=19498.308 buffer_time=2.795 print_stall=0 extruder: target=210 temp=210.7 pwm=0.266
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65464.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58274181 bytes_read=9157942 bytes_retransmit=9 bytes_invalid=0 send_seq=1115577 receive_seq=1115577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=14664 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119295 bytes_read=369347 bytes_retransmit=0 bytes_invalid=0 send_seq=19858 receive_seq=19858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49998011 sd_pos=2794490 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.14 cputime=5869.349 memavail=3269468 print_time=19499.106 buffer_time=2.593 print_stall=0 extruder: target=210 temp=210.5 pwm=0.320
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65465.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58285900 bytes_read=9159183 bytes_retransmit=9 bytes_invalid=0 send_seq=1115782 receive_seq=1115782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=16839 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119301 bytes_read=369363 bytes_retransmit=0 bytes_invalid=0 send_seq=19859 receive_seq=19859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997999 sd_pos=2797555 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.14 cputime=5869.530 memavail=3269476 print_time=19500.316 buffer_time=2.803 print_stall=0 extruder: target=210 temp=210.1 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65466.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58295326 bytes_read=9160220 bytes_retransmit=9 bytes_invalid=0 send_seq=1115949 receive_seq=1115949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=13842 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119307 bytes_read=369378 bytes_retransmit=0 bytes_invalid=0 send_seq=19860 receive_seq=19860 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998011 sd_pos=2799816 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.14 cputime=5869.602 memavail=3269476 print_time=19501.094 buffer_time=2.580 print_stall=0 extruder: target=210 temp=209.7 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65467.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58305384 bytes_read=9161289 bytes_retransmit=9 bytes_invalid=0 send_seq=1116117 receive_seq=1116117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=17173 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119313 bytes_read=369393 bytes_retransmit=0 bytes_invalid=0 send_seq=19861 receive_seq=19861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49998021 sd_pos=2803187 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.14 cputime=5869.693 memavail=3269476 print_time=19502.359 buffer_time=2.844 print_stall=0 extruder: target=210 temp=209.5 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65468.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58315163 bytes_read=9162365 bytes_retransmit=9 bytes_invalid=0 send_seq=1116289 receive_seq=1116289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=16063 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119319 bytes_read=369408 bytes_retransmit=0 bytes_invalid=0 send_seq=19862 receive_seq=19862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49997989 sd_pos=2805012 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.14 cputime=5869.768 memavail=3268468 print_time=19503.180 buffer_time=2.664 print_stall=0 extruder: target=210 temp=209.2 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65469.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58323301 bytes_read=9163287 bytes_retransmit=9 bytes_invalid=0 send_seq=1116433 receive_seq=1116433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12660 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119325 bytes_read=369436 bytes_retransmit=0 bytes_invalid=0 send_seq=19863 receive_seq=19863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997986 sd_pos=2806866 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.13 cputime=5869.825 memavail=3268468 print_time=19503.708 buffer_time=2.192 print_stall=0 extruder: target=210 temp=209.1 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65470.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58335676 bytes_read=9164534 bytes_retransmit=9 bytes_invalid=0 send_seq=1116639 receive_seq=1116639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=17157 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119331 bytes_read=369451 bytes_retransmit=0 bytes_invalid=0 send_seq=19864 receive_seq=19864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998924 adj=49997954 sd_pos=2810627 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.13 cputime=5869.953 memavail=3268468 print_time=19505.216 buffer_time=2.700 print_stall=0 extruder: target=210 temp=209.2 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65471.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58345314 bytes_read=9165600 bytes_retransmit=9 bytes_invalid=0 send_seq=1116809 receive_seq=1116809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12431 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119337 bytes_read=369467 bytes_retransmit=0 bytes_invalid=0 send_seq=19865 receive_seq=19865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997957 sd_pos=2810907 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.13 cputime=5870.140 memavail=3267964 print_time=19505.829 buffer_time=2.312 print_stall=0 extruder: target=210 temp=209.4 pwm=0.403
Stats 65472.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58356277 bytes_read=9166783 bytes_retransmit=9 bytes_invalid=0 send_seq=1117002 receive_seq=1117002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=4874 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119343 bytes_read=369483 bytes_retransmit=0 bytes_invalid=0 send_seq=19866 receive_seq=19866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997983 sd_pos=2810907 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.13 cputime=5870.313 memavail=3266708 print_time=19506.580 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.8 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65473.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58366755 bytes_read=9167900 bytes_retransmit=9 bytes_invalid=0 send_seq=1117182 receive_seq=1117182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119349 bytes_read=369499 bytes_retransmit=0 bytes_invalid=0 send_seq=19867 receive_seq=19867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49997969 sd_pos=2811389 heater_bed: target=60 temp=60.0 pwm=0.315 sysload=0.13 cputime=5870.497 memavail=3266484 print_time=19507.558 buffer_time=2.039 print_stall=0 extruder: target=210 temp=210.2 pwm=0.264
Stats 65474.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58370308 bytes_read=9168476 bytes_retransmit=9 bytes_invalid=0 send_seq=1117254 receive_seq=1117254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119355 bytes_read=369528 bytes_retransmit=0 bytes_invalid=0 send_seq=19868 receive_seq=19868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49997972 sd_pos=2811389 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.12 cputime=5870.691 memavail=3266488 print_time=19508.558 buffer_time=2.039 print_stall=0 extruder: target=210 temp=210.6 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65475.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58375687 bytes_read=9169188 bytes_retransmit=9 bytes_invalid=0 send_seq=1117356 receive_seq=1117356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1997 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119361 bytes_read=369544 bytes_retransmit=0 bytes_invalid=0 send_seq=19869 receive_seq=19869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997985 sd_pos=2814058 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.12 cputime=5870.787 memavail=3266488 print_time=19509.624 buffer_time=2.103 print_stall=0 extruder: target=210 temp=210.8 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65476.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58379384 bytes_read=9169720 bytes_retransmit=9 bytes_invalid=0 send_seq=1117419 receive_seq=1117419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=15329 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119367 bytes_read=369560 bytes_retransmit=0 bytes_invalid=0 send_seq=19870 receive_seq=19870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997996 sd_pos=2818135 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.12 cputime=5870.887 memavail=3266236 print_time=19511.207 buffer_time=2.686 print_stall=0 extruder: target=210 temp=210.9 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65477.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58386836 bytes_read=9170622 bytes_retransmit=9 bytes_invalid=0 send_seq=1117553 receive_seq=1117553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=13654 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119373 bytes_read=369576 bytes_retransmit=0 bytes_invalid=0 send_seq=19871 receive_seq=19871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49997999 sd_pos=2819911 heater_bed: target=60 temp=60.0 pwm=0.023 sysload=0.12 cputime=5871.002 memavail=3266236 print_time=19511.834 buffer_time=2.312 print_stall=0 extruder: target=210 temp=210.8 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65478.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58397772 bytes_read=9171769 bytes_retransmit=9 bytes_invalid=0 send_seq=1117743 receive_seq=1117743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=11461 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119379 bytes_read=369592 bytes_retransmit=0 bytes_invalid=0 send_seq=19872 receive_seq=19872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49998053 sd_pos=2821833 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.12 cputime=5871.128 memavail=3266240 print_time=19512.729 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.6 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65479.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58408940 bytes_read=9172951 bytes_retransmit=9 bytes_invalid=0 send_seq=1117936 receive_seq=1117936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=13327 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=119385 bytes_read=369621 bytes_retransmit=0 bytes_invalid=0 send_seq=19873 receive_seq=19873 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49998077 sd_pos=2825449 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.11 cputime=5871.222 memavail=3266248 print_time=19513.843 buffer_time=2.320 print_stall=0 extruder: target=210 temp=210.2 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65480.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58418260 bytes_read=9173987 bytes_retransmit=9 bytes_invalid=0 send_seq=1118100 receive_seq=1118100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20511 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=119391 bytes_read=369637 bytes_retransmit=0 bytes_invalid=0 send_seq=19874 receive_seq=19874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49998041 sd_pos=2829078 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.11 cputime=5871.342 memavail=3266248 print_time=19515.607 buffer_time=3.052 print_stall=0 extruder: target=210 temp=209.7 pwm=0.436
Stats 65481.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58430297 bytes_read=9175204 bytes_retransmit=9 bytes_invalid=0 send_seq=1118300 receive_seq=1118300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=9619 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=119397 bytes_read=369653 bytes_retransmit=0 bytes_invalid=0 send_seq=19875 receive_seq=19875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49998004 sd_pos=2829078 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.11 cputime=5871.391 memavail=3266248 print_time=19515.607 buffer_time=2.052 print_stall=0 extruder: target=210 temp=209.4 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65482.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58438852 bytes_read=9176171 bytes_retransmit=9 bytes_invalid=0 send_seq=1118447 receive_seq=1118447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=13979 freq=400007769 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=119403 bytes_read=369669 bytes_retransmit=0 bytes_invalid=0 send_seq=19876 receive_seq=19876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997906 sd_pos=2833790 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.11 cputime=5871.482 memavail=3266252 print_time=19517.098 buffer_time=2.542 print_stall=0 extruder: target=210 temp=209.1 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65483.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58450171 bytes_read=9177368 bytes_retransmit=9 bytes_invalid=0 send_seq=1118646 receive_seq=1118646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=17628 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=119409 bytes_read=369685 bytes_retransmit=0 bytes_invalid=0 send_seq=19877 receive_seq=19877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49997889 sd_pos=2837054 heater_bed: target=60 temp=60.0 pwm=0.013 sysload=0.11 cputime=5871.662 memavail=3266252 print_time=19518.387 buffer_time=2.830 print_stall=0 extruder: target=210 temp=209.1 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65484.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58459894 bytes_read=9178440 bytes_retransmit=9 bytes_invalid=0 send_seq=1118817 receive_seq=1118817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=11202 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=119415 bytes_read=369714 bytes_retransmit=0 bytes_invalid=0 send_seq=19878 receive_seq=19878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998931 adj=49997912 sd_pos=2837197 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.10 cputime=5871.750 memavail=3266252 print_time=19518.731 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.2 pwm=0.409
Stats 65485.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58469583 bytes_read=9179506 bytes_retransmit=9 bytes_invalid=0 send_seq=1118987 receive_seq=1118987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=5792 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=119421 bytes_read=369730 bytes_retransmit=0 bytes_invalid=0 send_seq=19879 receive_seq=19879 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997910 sd_pos=2837309 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.10 cputime=5871.974 memavail=3265508 print_time=19519.733 buffer_time=2.175 print_stall=0 extruder: target=210 temp=209.4 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65486.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58480351 bytes_read=9180618 bytes_retransmit=9 bytes_invalid=0 send_seq=1119169 receive_seq=1119169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=191 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=119427 bytes_read=369746 bytes_retransmit=0 bytes_invalid=0 send_seq=19880 receive_seq=19880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997908 sd_pos=2837786 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.10 cputime=5872.161 memavail=3264016 print_time=19520.692 buffer_time=2.134 print_stall=0 extruder: target=210 temp=209.8 pwm=0.358
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65487.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58484309 bytes_read=9181236 bytes_retransmit=9 bytes_invalid=0 send_seq=1119246 receive_seq=1119246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=644 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=119433 bytes_read=369762 bytes_retransmit=0 bytes_invalid=0 send_seq=19881 receive_seq=19881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49997937 sd_pos=2838013 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.10 cputime=5872.360 memavail=3264016 print_time=19521.865 buffer_time=2.305 print_stall=0 extruder: target=210 temp=210.1 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65488.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58489105 bytes_read=9181909 bytes_retransmit=9 bytes_invalid=0 send_seq=1119338 receive_seq=1119338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2024 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=119439 bytes_read=369778 bytes_retransmit=0 bytes_invalid=0 send_seq=19882 receive_seq=19882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997950 sd_pos=2840061 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.10 cputime=5872.428 memavail=3263408 print_time=19522.646 buffer_time=2.086 print_stall=0 extruder: target=210 temp=210.5 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65489.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58493074 bytes_read=9182488 bytes_retransmit=9 bytes_invalid=0 send_seq=1119414 receive_seq=1119414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=8209 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119445 bytes_read=369807 bytes_retransmit=0 bytes_invalid=0 send_seq=19883 receive_seq=19883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997964 sd_pos=2843210 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.17 cputime=5872.507 memavail=3263512 print_time=19523.718 buffer_time=2.156 print_stall=0 extruder: target=210 temp=210.6 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65490.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58500463 bytes_read=9183365 bytes_retransmit=9 bytes_invalid=0 send_seq=1119546 receive_seq=1119546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=14181 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119451 bytes_read=369823 bytes_retransmit=0 bytes_invalid=0 send_seq=19884 receive_seq=19884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997976 sd_pos=2846665 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.17 cputime=5872.602 memavail=3265140 print_time=19525.162 buffer_time=2.600 print_stall=0 extruder: target=210 temp=210.5 pwm=0.300
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65491.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58510197 bytes_read=9184436 bytes_retransmit=9 bytes_invalid=0 send_seq=1119717 receive_seq=1119717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=19092 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119457 bytes_read=369839 bytes_retransmit=0 bytes_invalid=0 send_seq=19885 receive_seq=19885 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49997986 sd_pos=2850105 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.17 cputime=5872.718 memavail=3265276 print_time=19526.446 buffer_time=2.883 print_stall=0 extruder: target=210 temp=210.4 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65492.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58521199 bytes_read=9185630 bytes_retransmit=9 bytes_invalid=0 send_seq=1119910 receive_seq=1119910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11988 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119469 bytes_read=369871 bytes_retransmit=0 bytes_invalid=0 send_seq=19887 receive_seq=19887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998013 sd_pos=2850897 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.17 cputime=5872.781 memavail=3265276 print_time=19526.854 buffer_time=2.291 print_stall=0 extruder: target=210 temp=210.2 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65493.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58530293 bytes_read=9186641 bytes_retransmit=9 bytes_invalid=0 send_seq=1120072 receive_seq=1120071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=19834 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119475 bytes_read=369887 bytes_retransmit=0 bytes_invalid=0 send_seq=19888 receive_seq=19888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998021 sd_pos=2856018 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.17 cputime=5872.937 memavail=3265276 print_time=19528.669 buffer_time=3.089 print_stall=0 extruder: target=210 temp=209.9 pwm=0.386
Stats 65494.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58542206 bytes_read=9187913 bytes_retransmit=9 bytes_invalid=0 send_seq=1120280 receive_seq=1120280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=9130 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119481 bytes_read=369916 bytes_retransmit=0 bytes_invalid=0 send_seq=19889 receive_seq=19889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998014 sd_pos=2856018 heater_bed: target=60 temp=60.0 pwm=0.047 sysload=0.16 cputime=5872.990 memavail=3265280 print_time=19528.669 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.7 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65495.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58549934 bytes_read=9188805 bytes_retransmit=9 bytes_invalid=0 send_seq=1120418 receive_seq=1120418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=12727 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119487 bytes_read=369932 bytes_retransmit=0 bytes_invalid=0 send_seq=19890 receive_seq=19890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998028 sd_pos=2859349 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.16 cputime=5873.075 memavail=3265280 print_time=19529.855 buffer_time=2.274 print_stall=0 extruder: target=210 temp=209.5 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65496.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58561184 bytes_read=9190002 bytes_retransmit=9 bytes_invalid=0 send_seq=1120614 receive_seq=1120614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=17653 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119493 bytes_read=369948 bytes_retransmit=0 bytes_invalid=0 send_seq=19891 receive_seq=19891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998030 sd_pos=2863503 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.16 cputime=5873.195 memavail=3265280 print_time=19531.348 buffer_time=2.766 print_stall=0 extruder: target=210 temp=209.4 pwm=0.442
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65497.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58571458 bytes_read=9191139 bytes_retransmit=9 bytes_invalid=0 send_seq=1120795 receive_seq=1120795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=11276 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119499 bytes_read=369964 bytes_retransmit=0 bytes_invalid=0 send_seq=19892 receive_seq=19892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998031 sd_pos=2863947 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.16 cputime=5873.267 memavail=3265280 print_time=19531.698 buffer_time=2.115 print_stall=0 extruder: target=210 temp=209.5 pwm=0.390
Stats 65498.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58581374 bytes_read=9192166 bytes_retransmit=9 bytes_invalid=0 send_seq=1120960 receive_seq=1120960 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=6286 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119505 bytes_read=369980 bytes_retransmit=0 bytes_invalid=0 send_seq=19893 receive_seq=19893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998929 adj=49998027 sd_pos=2863947 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.16 cputime=5873.480 memavail=3264776 print_time=19532.735 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.6 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65499.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58592371 bytes_read=9193292 bytes_retransmit=9 bytes_invalid=0 send_seq=1121143 receive_seq=1121143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1353 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119511 bytes_read=369996 bytes_retransmit=0 bytes_invalid=0 send_seq=19894 receive_seq=19894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49998033 sd_pos=2864411 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.15 cputime=5873.711 memavail=3264784 print_time=19533.756 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.7 pwm=0.390
Stats 65500.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58596607 bytes_read=9193918 bytes_retransmit=9 bytes_invalid=0 send_seq=1121225 receive_seq=1121225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=664 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119517 bytes_read=370025 bytes_retransmit=0 bytes_invalid=0 send_seq=19895 receive_seq=19895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49998006 sd_pos=2864411 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.15 cputime=5873.907 memavail=3264280 print_time=19534.757 buffer_time=2.172 print_stall=0 extruder: target=210 temp=210.0 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65501.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58602071 bytes_read=9194580 bytes_retransmit=9 bytes_invalid=0 send_seq=1121317 receive_seq=1121317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2299 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119523 bytes_read=370041 bytes_retransmit=0 bytes_invalid=0 send_seq=19896 receive_seq=19896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997999 sd_pos=2866605 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.15 cputime=5874.017 memavail=3264280 print_time=19535.816 buffer_time=2.230 print_stall=0 extruder: target=210 temp=210.2 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65502.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=58605892 bytes_read=9195133 bytes_retransmit=9 bytes_invalid=0 send_seq=1121381 receive_seq=1121381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=8287 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119529 bytes_read=370057 bytes_retransmit=0 bytes_invalid=0 send_seq=19897 receive_seq=19897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998928 adj=49997985 sd_pos=2868675 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.15 cputime=5874.089 memavail=3264296 print_time=19536.887 buffer_time=2.301 print_stall=0 extruder: target=210 temp=210.5 pwm=0.283
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65503.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=58612106 bytes_read=9195884 bytes_retransmit=9 bytes_invalid=0 send_seq=1121488 receive_seq=1121488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=12691 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119535 bytes_read=370073 bytes_retransmit=0 bytes_invalid=0 send_seq=19898 receive_seq=19898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998003 sd_pos=2871873 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.15 cputime=5874.165 memavail=3264300 print_time=19537.883 buffer_time=2.296 print_stall=0 extruder: target=210 temp=210.5 pwm=0.283
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65504.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=58621379 bytes_read=9196866 bytes_retransmit=9 bytes_invalid=0 send_seq=1121644 receive_seq=1121644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=21662 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=119541 bytes_read=370089 bytes_retransmit=0 bytes_invalid=0 send_seq=19899 receive_seq=19899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49998004 sd_pos=2877653 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.21 cputime=5874.349 memavail=3264300 print_time=19539.771 buffer_time=3.185 print_stall=0 extruder: target=210 temp=210.5 pwm=0.336
Stats 65505.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=58633088 bytes_read=9198103 bytes_retransmit=9 bytes_invalid=0 send_seq=1121848 receive_seq=1121848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=11119 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119547 bytes_read=370118 bytes_retransmit=0 bytes_invalid=0 send_seq=19900 receive_seq=19900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49998015 sd_pos=2877653 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.21 cputime=5874.398 memavail=3264300 print_time=19539.771 buffer_time=2.184 print_stall=0 extruder: target=210 temp=210.4 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65506.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=58641172 bytes_read=9199049 bytes_retransmit=9 bytes_invalid=0 send_seq=1121994 receive_seq=1121994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=15713 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119553 bytes_read=370134 bytes_retransmit=0 bytes_invalid=0 send_seq=19901 receive_seq=19901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49998005 sd_pos=2882210 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.21 cputime=5874.488 memavail=3264300 print_time=19541.245 buffer_time=2.642 print_stall=0 extruder: target=210 temp=210.1 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65507.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58653401 bytes_read=9200337 bytes_retransmit=9 bytes_invalid=0 send_seq=1122208 receive_seq=1122208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=19996 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119559 bytes_read=370150 bytes_retransmit=0 bytes_invalid=0 send_seq=19902 receive_seq=19902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49998008 sd_pos=2886284 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.21 cputime=5874.609 memavail=3264300 print_time=19542.692 buffer_time=3.089 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
Stats 65508.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58663492 bytes_read=9201439 bytes_retransmit=9 bytes_invalid=0 send_seq=1122385 receive_seq=1122385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=10923 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119565 bytes_read=370166 bytes_retransmit=0 bytes_invalid=0 send_seq=19903 receive_seq=19903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49997977 sd_pos=2886284 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.21 cputime=5874.654 memavail=3263952 print_time=19542.692 buffer_time=2.088 print_stall=0 extruder: target=210 temp=209.7 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65509.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58672505 bytes_read=9202455 bytes_retransmit=9 bytes_invalid=0 send_seq=1122545 receive_seq=1122545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=12993 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119571 bytes_read=370182 bytes_retransmit=0 bytes_invalid=0 send_seq=19904 receive_seq=19904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49997973 sd_pos=2890047 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.28 cputime=5874.742 memavail=3264056 print_time=19544.046 buffer_time=2.441 print_stall=0 extruder: target=210 temp=209.5 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65510.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58684318 bytes_read=9203672 bytes_retransmit=9 bytes_invalid=0 send_seq=1122749 receive_seq=1122749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=16741 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119577 bytes_read=370211 bytes_retransmit=0 bytes_invalid=0 send_seq=19905 receive_seq=19905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49997977 sd_pos=2893782 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.28 cputime=5874.910 memavail=3264056 print_time=19545.436 buffer_time=2.831 print_stall=0 extruder: target=210 temp=209.5 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65511.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58692363 bytes_read=9204569 bytes_retransmit=9 bytes_invalid=0 send_seq=1122885 receive_seq=1122885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11770 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119583 bytes_read=370227 bytes_retransmit=0 bytes_invalid=0 send_seq=19906 receive_seq=19906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49997977 sd_pos=2894018 heater_bed: target=60 temp=60.0 pwm=0.263 sysload=0.28 cputime=5874.995 memavail=3264056 print_time=19545.719 buffer_time=2.113 print_stall=0 extruder: target=210 temp=209.6 pwm=0.415
Stats 65512.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58703144 bytes_read=9205746 bytes_retransmit=9 bytes_invalid=0 send_seq=1123074 receive_seq=1123074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=6167 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119589 bytes_read=370243 bytes_retransmit=0 bytes_invalid=0 send_seq=19907 receive_seq=19907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49997946 sd_pos=2894104 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.28 cputime=5875.230 memavail=3263552 print_time=19546.790 buffer_time=2.183 print_stall=0 extruder: target=210 temp=209.8 pwm=0.363
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65513.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58713867 bytes_read=9206883 bytes_retransmit=9 bytes_invalid=0 send_seq=1123261 receive_seq=1123261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1303 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119595 bytes_read=370259 bytes_retransmit=0 bytes_invalid=0 send_seq=19908 receive_seq=19908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997983 sd_pos=2894494 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.28 cputime=5875.408 memavail=3262796 print_time=19547.784 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.9 pwm=0.363
Stats 65514.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58718232 bytes_read=9207515 bytes_retransmit=9 bytes_invalid=0 send_seq=1123344 receive_seq=1123344 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=817 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119601 bytes_read=370275 bytes_retransmit=0 bytes_invalid=0 send_seq=19909 receive_seq=19909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997977 sd_pos=2894613 heater_bed: target=60 temp=60.0 pwm=0.304 sysload=0.25 cputime=5875.623 memavail=3262944 print_time=19548.806 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.1 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65515.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58723597 bytes_read=9208231 bytes_retransmit=9 bytes_invalid=0 send_seq=1123444 receive_seq=1123444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2839 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119607 bytes_read=370304 bytes_retransmit=0 bytes_invalid=0 send_seq=19910 receive_seq=19910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998941 adj=49997981 sd_pos=2897168 heater_bed: target=60 temp=60.0 pwm=0.219 sysload=0.25 cputime=5875.781 memavail=3266756 print_time=19549.947 buffer_time=2.338 print_stall=0 extruder: target=210 temp=210.4 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65516.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58727642 bytes_read=9208818 bytes_retransmit=9 bytes_invalid=0 send_seq=1123521 receive_seq=1123521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7413 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119613 bytes_read=370320 bytes_retransmit=0 bytes_invalid=0 send_seq=19911 receive_seq=19911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998940 adj=49998037 sd_pos=2899080 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.25 cputime=5875.849 memavail=3266000 print_time=19550.955 buffer_time=2.345 print_stall=0 extruder: target=210 temp=210.6 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65517.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58733487 bytes_read=9209591 bytes_retransmit=9 bytes_invalid=0 send_seq=1123629 receive_seq=1123629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=14301 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119619 bytes_read=370336 bytes_retransmit=0 bytes_invalid=0 send_seq=19912 receive_seq=19912 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49998042 sd_pos=2902499 heater_bed: target=60 temp=60.0 pwm=0.024 sysload=0.25 cputime=5875.935 memavail=3266000 print_time=19552.080 buffer_time=2.470 print_stall=0 extruder: target=210 temp=210.6 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65518.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58741988 bytes_read=9210562 bytes_retransmit=9 bytes_invalid=0 send_seq=1123780 receive_seq=1123780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=11358 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119625 bytes_read=370352 bytes_retransmit=0 bytes_invalid=0 send_seq=19913 receive_seq=19913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998938 adj=49998018 sd_pos=2904763 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.25 cputime=5875.998 memavail=3265496 print_time=19552.685 buffer_time=2.075 print_stall=0 extruder: target=210 temp=210.5 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65519.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58753700 bytes_read=9211784 bytes_retransmit=9 bytes_invalid=0 send_seq=1123984 receive_seq=1123984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=9723 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119631 bytes_read=370368 bytes_retransmit=0 bytes_invalid=0 send_seq=19914 receive_seq=19914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49998026 sd_pos=2906886 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.31 cputime=5876.088 memavail=3265500 print_time=19553.735 buffer_time=2.124 print_stall=0 extruder: target=210 temp=210.3 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65520.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58763488 bytes_read=9212854 bytes_retransmit=9 bytes_invalid=0 send_seq=1124155 receive_seq=1124155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12768 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119637 bytes_read=370397 bytes_retransmit=0 bytes_invalid=0 send_seq=19915 receive_seq=19915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997999 sd_pos=2910492 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.31 cputime=5876.192 memavail=3265500 print_time=19554.845 buffer_time=2.232 print_stall=0 extruder: target=210 temp=210.1 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65521.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58772942 bytes_read=9213896 bytes_retransmit=9 bytes_invalid=0 send_seq=1124321 receive_seq=1124321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=9896 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119643 bytes_read=370413 bytes_retransmit=0 bytes_invalid=0 send_seq=19916 receive_seq=19916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49997990 sd_pos=2912940 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.31 cputime=5876.310 memavail=3265500 print_time=19555.649 buffer_time=2.035 print_stall=0 extruder: target=210 temp=209.8 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65522.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58784623 bytes_read=9215134 bytes_retransmit=9 bytes_invalid=0 send_seq=1124525 receive_seq=1124525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=17766 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119649 bytes_read=370429 bytes_retransmit=0 bytes_invalid=0 send_seq=19917 receive_seq=19917 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49998003 sd_pos=2918120 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.31 cputime=5876.450 memavail=3265500 print_time=19557.600 buffer_time=2.986 print_stall=0 extruder: target=210 temp=209.7 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65523.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58793163 bytes_read=9216116 bytes_retransmit=9 bytes_invalid=0 send_seq=1124678 receive_seq=1124678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=15288 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119655 bytes_read=370445 bytes_retransmit=0 bytes_invalid=0 send_seq=19918 receive_seq=19918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997993 sd_pos=2920428 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.31 cputime=5876.512 memavail=3265500 print_time=19558.278 buffer_time=2.658 print_stall=0 extruder: target=210 temp=209.7 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65524.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58802717 bytes_read=9217187 bytes_retransmit=9 bytes_invalid=0 send_seq=1124849 receive_seq=1124849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13756 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=119661 bytes_read=370461 bytes_retransmit=0 bytes_invalid=0 send_seq=19919 receive_seq=19919 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997986 sd_pos=2923676 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.29 cputime=5876.592 memavail=3265500 print_time=19559.150 buffer_time=2.528 print_stall=0 extruder: target=210 temp=209.6 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65525.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58814215 bytes_read=9218399 bytes_retransmit=9 bytes_invalid=0 send_seq=1125051 receive_seq=1125051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=14345 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119667 bytes_read=370490 bytes_retransmit=0 bytes_invalid=0 send_seq=19920 receive_seq=19920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49997993 sd_pos=2925370 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.29 cputime=5876.695 memavail=3265500 print_time=19560.206 buffer_time=2.585 print_stall=0 extruder: target=210 temp=209.7 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65526.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58822404 bytes_read=9219315 bytes_retransmit=9 bytes_invalid=0 send_seq=1125188 receive_seq=1125188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=10151 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119673 bytes_read=370506 bytes_retransmit=0 bytes_invalid=0 send_seq=19921 receive_seq=19921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49997985 sd_pos=2925583 heater_bed: target=60 temp=60.0 pwm=0.258 sysload=0.29 cputime=5876.938 memavail=3265500 print_time=19560.814 buffer_time=2.149 print_stall=0 extruder: target=210 temp=210.0 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65527.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58833596 bytes_read=9220493 bytes_retransmit=9 bytes_invalid=0 send_seq=1125380 receive_seq=1125380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=3952 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119679 bytes_read=370522 bytes_retransmit=0 bytes_invalid=0 send_seq=19922 receive_seq=19922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49998013 sd_pos=2925856 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.29 cputime=5877.166 memavail=3264240 print_time=19561.986 buffer_time=2.321 print_stall=0 extruder: target=210 temp=210.1 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65528.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58842055 bytes_read=9221430 bytes_retransmit=9 bytes_invalid=0 send_seq=1125524 receive_seq=1125524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=528 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119685 bytes_read=370538 bytes_retransmit=0 bytes_invalid=0 send_seq=19923 receive_seq=19923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997999 sd_pos=2926129 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.29 cputime=5877.351 memavail=3263500 print_time=19562.909 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.3 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65529.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58845665 bytes_read=9222001 bytes_retransmit=9 bytes_invalid=0 send_seq=1125595 receive_seq=1125595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=989 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119691 bytes_read=370554 bytes_retransmit=0 bytes_invalid=0 send_seq=19924 receive_seq=19924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998936 adj=49997986 sd_pos=2926364 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.35 cputime=5877.528 memavail=3268048 print_time=19563.891 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.6 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65530.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58850860 bytes_read=9222688 bytes_retransmit=9 bytes_invalid=0 send_seq=1125692 receive_seq=1125692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=7491 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=119697 bytes_read=370583 bytes_retransmit=0 bytes_invalid=0 send_seq=19925 receive_seq=19925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997991 sd_pos=2930102 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.35 cputime=5877.614 memavail=3267292 print_time=19565.380 buffer_time=2.677 print_stall=0 extruder: target=210 temp=210.6 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65531.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58855087 bytes_read=9223306 bytes_retransmit=9 bytes_invalid=0 send_seq=1125773 receive_seq=1125773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=17051 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=119703 bytes_read=370599 bytes_retransmit=0 bytes_invalid=0 send_seq=19926 receive_seq=19926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49997939 sd_pos=2933655 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.35 cputime=5877.712 memavail=3266536 print_time=19566.649 buffer_time=2.946 print_stall=0 extruder: target=210 temp=210.6 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65532.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58862975 bytes_read=9224246 bytes_retransmit=9 bytes_invalid=0 send_seq=1125915 receive_seq=1125915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=15037 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=119709 bytes_read=370615 bytes_retransmit=0 bytes_invalid=0 send_seq=19927 receive_seq=19927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49997915 sd_pos=2935828 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.35 cputime=5877.827 memavail=3266536 print_time=19567.322 buffer_time=2.618 print_stall=0 extruder: target=210 temp=210.5 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65533.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58872796 bytes_read=9225313 bytes_retransmit=9 bytes_invalid=0 send_seq=1126088 receive_seq=1126088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=13056 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=119715 bytes_read=370631 bytes_retransmit=0 bytes_invalid=0 send_seq=19928 receive_seq=19928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998945 adj=49997957 sd_pos=2939073 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.35 cputime=5877.965 memavail=3266060 print_time=19568.172 buffer_time=2.467 print_stall=0 extruder: target=210 temp=210.2 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65534.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58884066 bytes_read=9226515 bytes_retransmit=9 bytes_invalid=0 send_seq=1126285 receive_seq=1126285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=15567 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=119721 bytes_read=370647 bytes_retransmit=0 bytes_invalid=0 send_seq=19929 receive_seq=19929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998944 adj=49998017 sd_pos=2941511 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.32 cputime=5878.074 memavail=3266060 print_time=19569.406 buffer_time=2.700 print_stall=0 extruder: target=210 temp=209.9 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65535.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58891838 bytes_read=9227426 bytes_retransmit=9 bytes_invalid=0 send_seq=1126424 receive_seq=1126424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=14131 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119727 bytes_read=370676 bytes_retransmit=0 bytes_invalid=0 send_seq=19930 receive_seq=19930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998942 adj=49998010 sd_pos=2943780 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.32 cputime=5878.145 memavail=3266060 print_time=19570.222 buffer_time=2.515 print_stall=0 extruder: target=210 temp=209.5 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65536.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58902952 bytes_read=9228553 bytes_retransmit=9 bytes_invalid=0 send_seq=1126609 receive_seq=1126609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=10145 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119733 bytes_read=370692 bytes_retransmit=0 bytes_invalid=0 send_seq=19931 receive_seq=19931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998942 adj=49997991 sd_pos=2945707 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.32 cputime=5878.219 memavail=3266060 print_time=19571.014 buffer_time=2.306 print_stall=0 extruder: target=210 temp=209.4 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65537.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58912905 bytes_read=9229641 bytes_retransmit=9 bytes_invalid=0 send_seq=1126780 receive_seq=1126780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=12887 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119739 bytes_read=370708 bytes_retransmit=0 bytes_invalid=0 send_seq=19932 receive_seq=19932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998941 adj=49997987 sd_pos=2949024 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.32 cputime=5878.314 memavail=3266060 print_time=19572.173 buffer_time=2.465 print_stall=0 extruder: target=210 temp=209.3 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65538.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58920551 bytes_read=9230527 bytes_retransmit=9 bytes_invalid=0 send_seq=1126914 receive_seq=1126914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12541 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119745 bytes_read=370724 bytes_retransmit=0 bytes_invalid=0 send_seq=19933 receive_seq=19933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998941 adj=49997999 sd_pos=2950787 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.32 cputime=5878.394 memavail=3265304 print_time=19572.856 buffer_time=2.147 print_stall=0 extruder: target=210 temp=209.3 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65539.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58931786 bytes_read=9231714 bytes_retransmit=9 bytes_invalid=0 send_seq=1127111 receive_seq=1127111 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=18284 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=119751 bytes_read=370740 bytes_retransmit=0 bytes_invalid=0 send_seq=19934 receive_seq=19934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998945 adj=49997983 sd_pos=2956449 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.29 cputime=5878.594 memavail=3265320 print_time=19574.704 buffer_time=2.994 print_stall=0 extruder: target=210 temp=209.6 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65540.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58942738 bytes_read=9232896 bytes_retransmit=9 bytes_invalid=0 send_seq=1127304 receive_seq=1127304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=8467 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119757 bytes_read=370769 bytes_retransmit=0 bytes_invalid=0 send_seq=19935 receive_seq=19935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998946 adj=49998022 sd_pos=2957272 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.29 cputime=5878.653 memavail=3265320 print_time=19574.704 buffer_time=1.989 print_stall=0 extruder: target=210 temp=209.8 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65541.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=58950499 bytes_read=9233807 bytes_retransmit=9 bytes_invalid=0 send_seq=1127443 receive_seq=1127443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=13282 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119763 bytes_read=370785 bytes_retransmit=0 bytes_invalid=0 send_seq=19936 receive_seq=19936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998945 adj=49998031 sd_pos=2958260 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.29 cputime=5878.777 memavail=3265320 print_time=19576.005 buffer_time=2.290 print_stall=0 extruder: target=210 temp=210.3 pwm=0.311
Stats 65542.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58962258 bytes_read=9235046 bytes_retransmit=9 bytes_invalid=0 send_seq=1127648 receive_seq=1127648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=5090 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119769 bytes_read=370801 bytes_retransmit=0 bytes_invalid=0 send_seq=19937 receive_seq=19937 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998946 adj=49998043 sd_pos=2958260 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.29 cputime=5878.954 memavail=3264312 print_time=19576.755 buffer_time=2.039 print_stall=0 extruder: target=210 temp=210.6 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65543.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58972447 bytes_read=9236138 bytes_retransmit=9 bytes_invalid=0 send_seq=1127823 receive_seq=1127823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1045 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119775 bytes_read=370817 bytes_retransmit=0 bytes_invalid=0 send_seq=19938 receive_seq=19938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998946 adj=49998058 sd_pos=2958706 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5879.144 memavail=3264312 print_time=19577.821 buffer_time=2.105 print_stall=0 extruder: target=210 temp=210.9 pwm=0.259
Stats 65544.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58976600 bytes_read=9236724 bytes_retransmit=9 bytes_invalid=0 send_seq=1127897 receive_seq=1127897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1116 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119781 bytes_read=370833 bytes_retransmit=0 bytes_invalid=0 send_seq=19939 receive_seq=19939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49998071 sd_pos=2958850 heater_bed: target=60 temp=60.0 pwm=0.242 sysload=0.27 cputime=5879.414 memavail=3264072 print_time=19578.869 buffer_time=2.152 print_stall=0 extruder: target=210 temp=211.0 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65545.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58982265 bytes_read=9237451 bytes_retransmit=9 bytes_invalid=0 send_seq=1128002 receive_seq=1128002 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2538 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119787 bytes_read=370862 bytes_retransmit=0 bytes_invalid=0 send_seq=19940 receive_seq=19940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998948 adj=49998070 sd_pos=2961146 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.27 cputime=5879.527 memavail=3264072 print_time=19579.981 buffer_time=2.263 print_stall=0 extruder: target=210 temp=211.0 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65546.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=58986491 bytes_read=9238028 bytes_retransmit=9 bytes_invalid=0 send_seq=1128074 receive_seq=1128074 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=5029 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119793 bytes_read=370878 bytes_retransmit=0 bytes_invalid=0 send_seq=19941 receive_seq=19941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998947 adj=49998043 sd_pos=2963023 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.27 cputime=5879.587 memavail=3264080 print_time=19580.802 buffer_time=2.084 print_stall=0 extruder: target=210 temp=210.9 pwm=0.299
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65547.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=58992546 bytes_read=9238820 bytes_retransmit=9 bytes_invalid=0 send_seq=1128186 receive_seq=1128186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=11706 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119799 bytes_read=370894 bytes_retransmit=0 bytes_invalid=0 send_seq=19942 receive_seq=19942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49998009 sd_pos=2966499 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5879.677 memavail=3264836 print_time=19581.997 buffer_time=2.278 print_stall=0 extruder: target=210 temp=210.6 pwm=0.354
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65548.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59001028 bytes_read=9239747 bytes_retransmit=9 bytes_invalid=0 send_seq=1128332 receive_seq=1128331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=13446 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119805 bytes_read=370910 bytes_retransmit=0 bytes_invalid=0 send_seq=19943 receive_seq=19943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997978 sd_pos=2969631 heater_bed: target=60 temp=60.0 pwm=0.263 sysload=0.27 cputime=5879.760 memavail=3267048 print_time=19583.206 buffer_time=2.483 print_stall=0 extruder: target=210 temp=210.2 pwm=0.354
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65549.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59012186 bytes_read=9240939 bytes_retransmit=9 bytes_invalid=0 send_seq=1128526 receive_seq=1128526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=12372 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=119811 bytes_read=370926 bytes_retransmit=0 bytes_invalid=0 send_seq=19944 receive_seq=19944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49997992 sd_pos=2972777 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.33 cputime=5879.848 memavail=3267052 print_time=19584.203 buffer_time=2.479 print_stall=0 extruder: target=210 temp=209.8 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65550.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59022097 bytes_read=9242020 bytes_retransmit=9 bytes_invalid=0 send_seq=1128699 receive_seq=1128699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15048 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119817 bytes_read=370955 bytes_retransmit=0 bytes_invalid=0 send_seq=19945 receive_seq=19945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997974 sd_pos=2974886 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.33 cputime=5880.020 memavail=3267052 print_time=19585.305 buffer_time=2.581 print_stall=0 extruder: target=210 temp=209.2 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65551.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59030427 bytes_read=9242967 bytes_retransmit=9 bytes_invalid=0 send_seq=1128848 receive_seq=1128848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=12592 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119823 bytes_read=370971 bytes_retransmit=0 bytes_invalid=0 send_seq=19946 receive_seq=19946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49997988 sd_pos=2976915 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.33 cputime=5880.088 memavail=3267052 print_time=19586.056 buffer_time=2.332 print_stall=0 extruder: target=210 temp=208.8 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65552.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59041733 bytes_read=9244184 bytes_retransmit=9 bytes_invalid=0 send_seq=1129045 receive_seq=1129045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=6905 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119829 bytes_read=370986 bytes_retransmit=0 bytes_invalid=0 send_seq=19947 receive_seq=19947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998948 adj=49997980 sd_pos=2978502 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.33 cputime=5880.158 memavail=3267052 print_time=19586.737 buffer_time=2.012 print_stall=0 extruder: target=210 temp=208.8 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65553.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59051309 bytes_read=9245236 bytes_retransmit=9 bytes_invalid=0 send_seq=1129214 receive_seq=1129213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13152 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119835 bytes_read=371001 bytes_retransmit=0 bytes_invalid=0 send_seq=19948 receive_seq=19948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998947 adj=49997973 sd_pos=2982559 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.33 cputime=5880.266 memavail=3267052 print_time=19588.081 buffer_time=2.356 print_stall=0 extruder: target=210 temp=208.9 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65554.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59059166 bytes_read=9246113 bytes_retransmit=9 bytes_invalid=0 send_seq=1129348 receive_seq=1129348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12860 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119841 bytes_read=371016 bytes_retransmit=0 bytes_invalid=0 send_seq=19949 receive_seq=19949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998945 adj=49997978 sd_pos=2984021 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.30 cputime=5880.325 memavail=3267052 print_time=19588.821 buffer_time=2.094 print_stall=0 extruder: target=210 temp=209.1 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65555.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59071737 bytes_read=9247440 bytes_retransmit=9 bytes_invalid=0 send_seq=1129565 receive_seq=1129565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=13897 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119853 bytes_read=371059 bytes_retransmit=0 bytes_invalid=0 send_seq=19951 receive_seq=19951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998945 adj=49997986 sd_pos=2987655 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.30 cputime=5880.475 memavail=3267052 print_time=19590.324 buffer_time=2.597 print_stall=0 extruder: target=210 temp=209.6 pwm=0.354
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65556.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59082094 bytes_read=9248507 bytes_retransmit=9 bytes_invalid=0 send_seq=1129738 receive_seq=1129738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=15643 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119859 bytes_read=371075 bytes_retransmit=0 bytes_invalid=0 send_seq=19952 receive_seq=19952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998944 adj=49997949 sd_pos=2990815 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.30 cputime=5880.568 memavail=3267052 print_time=19591.368 buffer_time=2.641 print_stall=0 extruder: target=210 temp=210.0 pwm=0.293
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65557.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59089580 bytes_read=9249384 bytes_retransmit=9 bytes_invalid=0 send_seq=1129873 receive_seq=1129872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=12896 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119865 bytes_read=371091 bytes_retransmit=0 bytes_invalid=0 send_seq=19953 receive_seq=19953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998944 adj=49997925 sd_pos=2991059 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.30 cputime=5880.670 memavail=3267064 print_time=19591.975 buffer_time=2.247 print_stall=0 extruder: target=210 temp=210.4 pwm=0.293
Stats 65558.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59102092 bytes_read=9250716 bytes_retransmit=9 bytes_invalid=0 send_seq=1130090 receive_seq=1130090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=4276 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119871 bytes_read=371107 bytes_retransmit=0 bytes_invalid=0 send_seq=19954 receive_seq=19954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49997944 sd_pos=2991147 heater_bed: target=60 temp=60.0 pwm=0.237 sysload=0.30 cputime=5880.864 memavail=3266336 print_time=19592.737 buffer_time=2.008 print_stall=0 extruder: target=210 temp=210.9 pwm=0.223
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65559.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59111617 bytes_read=9251713 bytes_retransmit=9 bytes_invalid=0 send_seq=1130250 receive_seq=1130249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1140 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=119877 bytes_read=371123 bytes_retransmit=0 bytes_invalid=0 send_seq=19955 receive_seq=19955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997978 sd_pos=2991537 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.36 cputime=5881.081 memavail=3265588 print_time=19593.968 buffer_time=2.207 print_stall=0 extruder: target=210 temp=211.1 pwm=0.223
Stats 65560.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59115729 bytes_read=9252335 bytes_retransmit=9 bytes_invalid=0 send_seq=1130330 receive_seq=1130330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=541 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119883 bytes_read=371152 bytes_retransmit=0 bytes_invalid=0 send_seq=19956 receive_seq=19956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49997998 sd_pos=2991679 heater_bed: target=60 temp=60.0 pwm=0.272 sysload=0.36 cputime=5881.292 memavail=3265588 print_time=19594.776 buffer_time=2.013 print_stall=0 extruder: target=210 temp=211.2 pwm=0.223
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65561.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59121234 bytes_read=9253061 bytes_retransmit=9 bytes_invalid=0 send_seq=1130432 receive_seq=1130432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1723 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119889 bytes_read=371168 bytes_retransmit=0 bytes_invalid=0 send_seq=19957 receive_seq=19957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998948 adj=49998013 sd_pos=2993949 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.36 cputime=5881.410 memavail=3264832 print_time=19595.840 buffer_time=2.077 print_stall=0 extruder: target=210 temp=211.1 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65562.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59125583 bytes_read=9253699 bytes_retransmit=9 bytes_invalid=0 send_seq=1130516 receive_seq=1130516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=18725 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119895 bytes_read=371184 bytes_retransmit=0 bytes_invalid=0 send_seq=19958 receive_seq=19958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998947 adj=49998003 sd_pos=2999123 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.36 cputime=5881.532 memavail=3265104 print_time=19597.952 buffer_time=3.188 print_stall=0 extruder: target=210 temp=210.8 pwm=0.331
Stats 65563.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59132178 bytes_read=9254517 bytes_retransmit=9 bytes_invalid=0 send_seq=1130637 receive_seq=1130637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=12876 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119901 bytes_read=371200 bytes_retransmit=0 bytes_invalid=0 send_seq=19959 receive_seq=19959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998946 adj=49997964 sd_pos=2999123 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.36 cputime=5881.569 memavail=3265844 print_time=19597.952 buffer_time=2.188 print_stall=0 extruder: target=210 temp=210.4 pwm=0.411
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65564.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59141257 bytes_read=9255497 bytes_retransmit=9 bytes_invalid=0 send_seq=1130790 receive_seq=1130790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=12914 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=119907 bytes_read=371216 bytes_retransmit=0 bytes_invalid=0 send_seq=19960 receive_seq=19960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998946 adj=49997975 sd_pos=3002136 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.33 cputime=5881.639 memavail=3269996 print_time=19599.013 buffer_time=2.248 print_stall=0 extruder: target=210 temp=209.7 pwm=0.470
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65565.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59154056 bytes_read=9256799 bytes_retransmit=9 bytes_invalid=0 send_seq=1131010 receive_seq=1131010 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=8374 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119913 bytes_read=371245 bytes_retransmit=0 bytes_invalid=0 send_seq=19961 receive_seq=19961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997984 sd_pos=3005249 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.33 cputime=5881.728 memavail=3269996 print_time=19599.903 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.2 pwm=0.521
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65566.4: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59163297 bytes_read=9257831 bytes_retransmit=9 bytes_invalid=0 send_seq=1131173 receive_seq=1131173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=14246 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119919 bytes_read=371261 bytes_retransmit=0 bytes_invalid=0 send_seq=19962 receive_seq=19962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49998027 sd_pos=3007787 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.33 cputime=5881.897 memavail=3269996 print_time=19601.159 buffer_time=2.393 print_stall=0 extruder: target=210 temp=208.9 pwm=0.521
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65567.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59171477 bytes_read=9258798 bytes_retransmit=9 bytes_invalid=0 send_seq=1131320 receive_seq=1131320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=15447 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119925 bytes_read=371277 bytes_retransmit=0 bytes_invalid=0 send_seq=19963 receive_seq=19963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49998033 sd_pos=3011393 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.33 cputime=5881.975 memavail=3269996 print_time=19602.364 buffer_time=2.598 print_stall=0 extruder: target=210 temp=208.6 pwm=0.521
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65568.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59183895 bytes_read=9260080 bytes_retransmit=9 bytes_invalid=0 send_seq=1131536 receive_seq=1131536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=8649 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119931 bytes_read=371293 bytes_retransmit=0 bytes_invalid=0 send_seq=19964 receive_seq=19964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49998044 sd_pos=3013603 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.33 cputime=5882.044 memavail=3268776 print_time=19603.120 buffer_time=2.352 print_stall=0 extruder: target=210 temp=208.7 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65569.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59193548 bytes_read=9261152 bytes_retransmit=9 bytes_invalid=0 send_seq=1131707 receive_seq=1131707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=14380 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=119937 bytes_read=371309 bytes_retransmit=0 bytes_invalid=0 send_seq=19965 receive_seq=19965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49998028 sd_pos=3019177 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.30 cputime=5882.156 memavail=3268776 print_time=19604.830 buffer_time=3.062 print_stall=0 extruder: target=210 temp=208.9 pwm=0.395
Stats 65570.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59200938 bytes_read=9262043 bytes_retransmit=9 bytes_invalid=0 send_seq=1131842 receive_seq=1131842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=7802 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=119943 bytes_read=371338 bytes_retransmit=0 bytes_invalid=0 send_seq=19966 receive_seq=19966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49998010 sd_pos=3019177 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.30 cputime=5882.196 memavail=3268776 print_time=19604.830 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.5 pwm=0.338
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65571.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59207865 bytes_read=9262875 bytes_retransmit=9 bytes_invalid=0 send_seq=1131968 receive_seq=1131968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=15240 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=119949 bytes_read=371354 bytes_retransmit=0 bytes_invalid=0 send_seq=19967 receive_seq=19967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49998021 sd_pos=3022423 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.30 cputime=5882.334 memavail=3268776 print_time=19606.071 buffer_time=2.302 print_stall=0 extruder: target=210 temp=210.0 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65572.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59218717 bytes_read=9264058 bytes_retransmit=9 bytes_invalid=0 send_seq=1132158 receive_seq=1132158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=16907 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=119955 bytes_read=371370 bytes_retransmit=0 bytes_invalid=0 send_seq=19968 receive_seq=19968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998065 sd_pos=3024294 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.30 cputime=5882.486 memavail=3268776 print_time=19607.221 buffer_time=2.451 print_stall=0 extruder: target=210 temp=210.4 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65573.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59231211 bytes_read=9265309 bytes_retransmit=9 bytes_invalid=0 send_seq=1132365 receive_seq=1132365 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=11917 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=119961 bytes_read=371386 bytes_retransmit=0 bytes_invalid=0 send_seq=19969 receive_seq=19969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998060 sd_pos=3024979 heater_bed: target=60 temp=60.0 pwm=0.345 sysload=0.30 cputime=5882.622 memavail=3268544 print_time=19608.025 buffer_time=2.255 print_stall=0 extruder: target=210 temp=210.9 pwm=0.196
Stats 65574.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59241951 bytes_read=9266446 bytes_retransmit=9 bytes_invalid=0 send_seq=1132553 receive_seq=1132553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=4871 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=119967 bytes_read=371402 bytes_retransmit=0 bytes_invalid=0 send_seq=19970 receive_seq=19970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998063 sd_pos=3025066 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.28 cputime=5882.815 memavail=3268040 print_time=19608.780 buffer_time=2.009 print_stall=0 extruder: target=210 temp=211.2 pwm=0.196
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65575.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59252338 bytes_read=9267578 bytes_retransmit=9 bytes_invalid=0 send_seq=1132736 receive_seq=1132736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=924 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119973 bytes_read=371431 bytes_retransmit=0 bytes_invalid=0 send_seq=19971 receive_seq=19971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998075 sd_pos=3025523 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.28 cputime=5883.036 memavail=3267032 print_time=19610.005 buffer_time=2.207 print_stall=0 extruder: target=210 temp=211.3 pwm=0.196
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65576.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59256347 bytes_read=9268184 bytes_retransmit=9 bytes_invalid=0 send_seq=1132814 receive_seq=1132814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=1462 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119979 bytes_read=371447 bytes_retransmit=0 bytes_invalid=0 send_seq=19972 receive_seq=19972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998074 sd_pos=3025850 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.28 cputime=5883.245 memavail=3266780 print_time=19611.157 buffer_time=2.357 print_stall=0 extruder: target=210 temp=211.2 pwm=0.252
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65577.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59261696 bytes_read=9268872 bytes_retransmit=9 bytes_invalid=0 send_seq=1132908 receive_seq=1132908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1347 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119985 bytes_read=371463 bytes_retransmit=0 bytes_invalid=0 send_seq=19973 receive_seq=19973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49998050 sd_pos=3027643 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.28 cputime=5883.345 memavail=3266780 print_time=19611.801 buffer_time=2.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65578.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59265513 bytes_read=9269444 bytes_retransmit=9 bytes_invalid=0 send_seq=1132979 receive_seq=1132979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=6329 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119991 bytes_read=371479 bytes_retransmit=0 bytes_invalid=0 send_seq=19974 receive_seq=19974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998062 sd_pos=3032023 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.26 cputime=5883.446 memavail=3265780 print_time=19613.048 buffer_time=2.247 print_stall=0 extruder: target=210 temp=210.5 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65579.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59272782 bytes_read=9270305 bytes_retransmit=9 bytes_invalid=0 send_seq=1133108 receive_seq=1133108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16990 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=119997 bytes_read=371495 bytes_retransmit=0 bytes_invalid=0 send_seq=19975 receive_seq=19975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998052 sd_pos=3036335 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.26 cputime=5883.578 memavail=3265780 print_time=19614.915 buffer_time=3.113 print_stall=0 extruder: target=210 temp=209.8 pwm=0.416
Stats 65580.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59280308 bytes_read=9271137 bytes_retransmit=9 bytes_invalid=0 send_seq=1133234 receive_seq=1133234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=10242 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120003 bytes_read=371524 bytes_retransmit=0 bytes_invalid=0 send_seq=19976 receive_seq=19976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998007 sd_pos=3036335 heater_bed: target=60 temp=60.0 pwm=0.374 sysload=0.26 cputime=5883.617 memavail=3265780 print_time=19614.915 buffer_time=2.112 print_stall=0 extruder: target=210 temp=209.4 pwm=0.471
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65581.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59288005 bytes_read=9272004 bytes_retransmit=9 bytes_invalid=0 send_seq=1133364 receive_seq=1133364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=14380 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120009 bytes_read=371540 bytes_retransmit=0 bytes_invalid=0 send_seq=19977 receive_seq=19977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998012 sd_pos=3041024 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.26 cputime=5883.707 memavail=3265780 print_time=19616.084 buffer_time=2.280 print_stall=0 extruder: target=210 temp=208.9 pwm=0.529
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65582.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59300173 bytes_read=9273296 bytes_retransmit=9 bytes_invalid=0 send_seq=1133576 receive_seq=1133576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=16015 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120015 bytes_read=371556 bytes_retransmit=0 bytes_invalid=0 send_seq=19978 receive_seq=19978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49998018 sd_pos=3043173 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.26 cputime=5883.823 memavail=3265780 print_time=19617.230 buffer_time=2.426 print_stall=0 extruder: target=210 temp=208.5 pwm=0.529
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65583.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59310767 bytes_read=9274433 bytes_retransmit=9 bytes_invalid=0 send_seq=1133763 receive_seq=1133763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=10295 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120021 bytes_read=371572 bytes_retransmit=0 bytes_invalid=0 send_seq=19979 receive_seq=19979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998018 sd_pos=3044484 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.23 cputime=5883.937 memavail=3265780 print_time=19617.834 buffer_time=2.029 print_stall=0 extruder: target=210 temp=208.5 pwm=0.529
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65584.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59322201 bytes_read=9275650 bytes_retransmit=9 bytes_invalid=0 send_seq=1133963 receive_seq=1133963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=7415 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120027 bytes_read=371588 bytes_retransmit=0 bytes_invalid=0 send_seq=19980 receive_seq=19980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49998025 sd_pos=3048634 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.23 cputime=5884.100 memavail=3265780 print_time=19619.012 buffer_time=2.207 print_stall=0 extruder: target=210 temp=208.6 pwm=0.466
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65585.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59331377 bytes_read=9276675 bytes_retransmit=9 bytes_invalid=0 send_seq=1134126 receive_seq=1134126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11645 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=120033 bytes_read=371617 bytes_retransmit=0 bytes_invalid=0 send_seq=19981 receive_seq=19981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998040 sd_pos=3052054 heater_bed: target=60 temp=60.0 pwm=0.217 sysload=0.23 cputime=5884.266 memavail=3265780 print_time=19620.451 buffer_time=2.646 print_stall=0 extruder: target=210 temp=209.1 pwm=0.406
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65586.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59338659 bytes_read=9277532 bytes_retransmit=9 bytes_invalid=0 send_seq=1134257 receive_seq=1134257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=14972 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=120039 bytes_read=371633 bytes_retransmit=0 bytes_invalid=0 send_seq=19982 receive_seq=19982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998035 sd_pos=3056569 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.23 cputime=5884.359 memavail=3265780 print_time=19621.511 buffer_time=2.704 print_stall=0 extruder: target=210 temp=209.6 pwm=0.295
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65587.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59346540 bytes_read=9278470 bytes_retransmit=9 bytes_invalid=0 send_seq=1134398 receive_seq=1134398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=24288 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=120045 bytes_read=371649 bytes_retransmit=0 bytes_invalid=0 send_seq=19983 receive_seq=19983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998035 sd_pos=3059089 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.23 cputime=5884.468 memavail=3265780 print_time=19622.967 buffer_time=3.159 print_stall=0 extruder: target=210 temp=210.1 pwm=0.295
Stats 65588.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59357963 bytes_read=9279681 bytes_retransmit=9 bytes_invalid=0 send_seq=1134597 receive_seq=1134597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=13986 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=120051 bytes_read=371665 bytes_retransmit=0 bytes_invalid=0 send_seq=19984 receive_seq=19984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998017 sd_pos=3059089 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.22 cputime=5884.517 memavail=3265276 print_time=19622.967 buffer_time=2.158 print_stall=0 extruder: target=210 temp=210.7 pwm=0.239
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65589.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59368440 bytes_read=9280813 bytes_retransmit=9 bytes_invalid=0 send_seq=1134783 receive_seq=1134783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=15517 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=120057 bytes_read=371681 bytes_retransmit=0 bytes_invalid=0 send_seq=19985 receive_seq=19985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998954 adj=49998016 sd_pos=3060670 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.22 cputime=5884.610 memavail=3265296 print_time=19624.012 buffer_time=2.203 print_stall=0 extruder: target=210 temp=211.1 pwm=0.239
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65590.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59381325 bytes_read=9282150 bytes_retransmit=9 bytes_invalid=0 send_seq=1135007 receive_seq=1135007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=8664 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120063 bytes_read=371710 bytes_retransmit=0 bytes_invalid=0 send_seq=19986 receive_seq=19986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49998014 sd_pos=3060948 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.22 cputime=5884.825 memavail=3265044 print_time=19624.867 buffer_time=2.058 print_stall=0 extruder: target=210 temp=211.4 pwm=0.239
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65591.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59392614 bytes_read=9283351 bytes_retransmit=9 bytes_invalid=0 send_seq=1135204 receive_seq=1135204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2966 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120069 bytes_read=371726 bytes_retransmit=0 bytes_invalid=0 send_seq=19987 receive_seq=19987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997997 sd_pos=3061351 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.22 cputime=5885.049 memavail=3265044 print_time=19626.046 buffer_time=2.236 print_stall=0 extruder: target=210 temp=211.3 pwm=0.239
Stats 65592.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59399315 bytes_read=9284174 bytes_retransmit=9 bytes_invalid=0 send_seq=1135325 receive_seq=1135325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120075 bytes_read=371742 bytes_retransmit=0 bytes_invalid=0 send_seq=19988 receive_seq=19988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49998002 sd_pos=3061351 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.22 cputime=5885.212 memavail=3265044 print_time=19626.846 buffer_time=2.036 print_stall=0 extruder: target=210 temp=211.2 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65593.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59403411 bytes_read=9284786 bytes_retransmit=9 bytes_invalid=0 send_seq=1135404 receive_seq=1135404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=809 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120081 bytes_read=371758 bytes_retransmit=0 bytes_invalid=0 send_seq=19989 receive_seq=19989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997966 sd_pos=3061935 heater_bed: target=60 temp=60.0 pwm=0.239 sysload=0.20 cputime=5885.387 memavail=3265048 print_time=19627.859 buffer_time=2.048 print_stall=0 extruder: target=210 temp=211.0 pwm=0.309
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65594.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59408424 bytes_read=9285477 bytes_retransmit=9 bytes_invalid=0 send_seq=1135499 receive_seq=1135499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=4890 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120087 bytes_read=371774 bytes_retransmit=0 bytes_invalid=0 send_seq=19990 receive_seq=19990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997966 sd_pos=3066376 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.20 cputime=5885.465 memavail=3265048 print_time=19629.160 buffer_time=2.348 print_stall=0 extruder: target=210 temp=210.6 pwm=0.367
Stats 65595.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59413461 bytes_read=9286152 bytes_retransmit=9 bytes_invalid=0 send_seq=1135594 receive_seq=1135594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=3865 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120093 bytes_read=371803 bytes_retransmit=0 bytes_invalid=0 send_seq=19991 receive_seq=19991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49997994 sd_pos=3068324 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.20 cputime=5885.516 memavail=3265048 print_time=19629.823 buffer_time=2.011 print_stall=0 extruder: target=210 temp=210.2 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65596.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59420815 bytes_read=9286975 bytes_retransmit=9 bytes_invalid=0 send_seq=1135716 receive_seq=1135716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=5884 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120099 bytes_read=371819 bytes_retransmit=0 bytes_invalid=0 send_seq=19992 receive_seq=19992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997856 sd_pos=3072700 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.20 cputime=5885.644 memavail=3264040 print_time=19630.832 buffer_time=2.019 print_stall=0 extruder: target=210 temp=209.8 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65597.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=59427145 bytes_read=9287777 bytes_retransmit=9 bytes_invalid=0 send_seq=1135830 receive_seq=1135830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=15161 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120105 bytes_read=371835 bytes_retransmit=0 bytes_invalid=0 send_seq=19993 receive_seq=19993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997864 sd_pos=3075867 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.20 cputime=5885.746 memavail=3264040 print_time=19632.235 buffer_time=2.422 print_stall=0 extruder: target=210 temp=209.1 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65598.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=59437164 bytes_read=9288864 bytes_retransmit=9 bytes_invalid=0 send_seq=1136007 receive_seq=1136007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=17550 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120111 bytes_read=371851 bytes_retransmit=0 bytes_invalid=0 send_seq=19994 receive_seq=19994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49997900 sd_pos=3077546 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.18 cputime=5885.841 memavail=3264040 print_time=19633.358 buffer_time=2.544 print_stall=0 extruder: target=210 temp=208.8 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65599.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=59448491 bytes_read=9290076 bytes_retransmit=9 bytes_invalid=0 send_seq=1136206 receive_seq=1136206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=17728 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120117 bytes_read=371867 bytes_retransmit=0 bytes_invalid=0 send_seq=19995 receive_seq=19995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997926 sd_pos=3079471 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.18 cputime=5885.935 memavail=3264048 print_time=19634.275 buffer_time=2.460 print_stall=0 extruder: target=210 temp=208.6 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65600.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=59460170 bytes_read=9291312 bytes_retransmit=9 bytes_invalid=0 send_seq=1136410 receive_seq=1136410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=11828 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120123 bytes_read=371883 bytes_retransmit=0 bytes_invalid=0 send_seq=19996 receive_seq=19996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997943 sd_pos=3081358 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.18 cputime=5886.012 memavail=3264048 print_time=19634.973 buffer_time=2.158 print_stall=0 extruder: target=210 temp=208.6 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65601.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=59472006 bytes_read=9292554 bytes_retransmit=9 bytes_invalid=0 send_seq=1136618 receive_seq=1136618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7687 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120129 bytes_read=371912 bytes_retransmit=0 bytes_invalid=0 send_seq=19997 receive_seq=19997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997959 sd_pos=3085083 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.18 cputime=5886.162 memavail=3263296 print_time=19636.079 buffer_time=2.262 print_stall=0 extruder: target=210 temp=208.7 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65602.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59481278 bytes_read=9293607 bytes_retransmit=9 bytes_invalid=0 send_seq=1136782 receive_seq=1136782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=5965 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120135 bytes_read=371928 bytes_retransmit=0 bytes_invalid=0 send_seq=19998 receive_seq=19998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998954 adj=49997975 sd_pos=3086624 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.18 cputime=5886.284 memavail=3263296 print_time=19636.936 buffer_time=2.119 print_stall=0 extruder: target=210 temp=209.1 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65603.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59488290 bytes_read=9294463 bytes_retransmit=9 bytes_invalid=0 send_seq=1136910 receive_seq=1136910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=11671 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120141 bytes_read=371944 bytes_retransmit=0 bytes_invalid=0 send_seq=19999 receive_seq=19999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49998012 sd_pos=3090488 heater_bed: target=60 temp=60.0 pwm=0.228 sysload=0.17 cputime=5886.378 memavail=3263296 print_time=19638.158 buffer_time=2.340 print_stall=0 extruder: target=210 temp=209.7 pwm=0.322
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65604.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59496563 bytes_read=9295405 bytes_retransmit=9 bytes_invalid=0 send_seq=1137058 receive_seq=1137058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=13289 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120147 bytes_read=371960 bytes_retransmit=0 bytes_invalid=0 send_seq=20000 receive_seq=20000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49998016 sd_pos=3094617 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.17 cputime=5886.476 memavail=3263296 print_time=19639.130 buffer_time=2.312 print_stall=0 extruder: target=210 temp=210.2 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65605.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59507486 bytes_read=9296577 bytes_retransmit=9 bytes_invalid=0 send_seq=1137249 receive_seq=1137249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=16147 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120153 bytes_read=371976 bytes_retransmit=0 bytes_invalid=0 send_seq=20001 receive_seq=20001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997991 sd_pos=3096992 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.17 cputime=5886.593 memavail=3263296 print_time=19640.434 buffer_time=2.615 print_stall=0 extruder: target=210 temp=210.6 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65606.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59517487 bytes_read=9297669 bytes_retransmit=9 bytes_invalid=0 send_seq=1137425 receive_seq=1137425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=15687 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120159 bytes_read=372005 bytes_retransmit=0 bytes_invalid=0 send_seq=20002 receive_seq=20002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997981 sd_pos=3098329 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.17 cputime=5886.677 memavail=3263296 print_time=19641.322 buffer_time=2.502 print_stall=0 extruder: target=210 temp=211.1 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65607.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59528473 bytes_read=9298805 bytes_retransmit=9 bytes_invalid=0 send_seq=1137609 receive_seq=1137609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=9374 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120165 bytes_read=372021 bytes_retransmit=0 bytes_invalid=0 send_seq=20003 receive_seq=20003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998950 adj=49997992 sd_pos=3098545 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.17 cputime=5886.866 memavail=3263296 print_time=19642.011 buffer_time=2.191 print_stall=0 extruder: target=210 temp=211.2 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65608.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59538429 bytes_read=9299897 bytes_retransmit=9 bytes_invalid=0 send_seq=1137784 receive_seq=1137784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=4595 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120171 bytes_read=372037 bytes_retransmit=0 bytes_invalid=0 send_seq=20004 receive_seq=20004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49997989 sd_pos=3098825 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.23 cputime=5887.103 memavail=3262552 print_time=19643.185 buffer_time=2.364 print_stall=0 extruder: target=210 temp=211.2 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65609.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59547129 bytes_read=9300838 bytes_retransmit=9 bytes_invalid=0 send_seq=1137929 receive_seq=1137929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1013 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120177 bytes_read=372053 bytes_retransmit=0 bytes_invalid=0 send_seq=20005 receive_seq=20005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49998002 sd_pos=3099097 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.23 cputime=5887.291 memavail=3262060 print_time=19644.071 buffer_time=2.219 print_stall=0 extruder: target=210 temp=211.1 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65610.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59551026 bytes_read=9301435 bytes_retransmit=9 bytes_invalid=0 send_seq=1138005 receive_seq=1138005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=795 freq=400007755 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120183 bytes_read=372069 bytes_retransmit=0 bytes_invalid=0 send_seq=20006 receive_seq=20006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49998008 sd_pos=3099326 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.23 cputime=5887.466 memavail=3262060 print_time=19645.007 buffer_time=2.155 print_stall=0 extruder: target=210 temp=210.9 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65611.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59556223 bytes_read=9302136 bytes_retransmit=9 bytes_invalid=0 send_seq=1138102 receive_seq=1138102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=3141 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120189 bytes_read=372098 bytes_retransmit=0 bytes_invalid=0 send_seq=20007 receive_seq=20007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49997870 sd_pos=3102468 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.23 cputime=5887.543 memavail=3262060 print_time=19646.014 buffer_time=2.161 print_stall=0 extruder: target=210 temp=210.5 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65612.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59560299 bytes_read=9302744 bytes_retransmit=9 bytes_invalid=0 send_seq=1138180 receive_seq=1138180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11544 freq=400007841 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120195 bytes_read=372114 bytes_retransmit=0 bytes_invalid=0 send_seq=20008 receive_seq=20008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49997894 sd_pos=3106730 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.23 cputime=5887.675 memavail=3262060 print_time=19647.748 buffer_time=2.895 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65613.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59568046 bytes_read=9303666 bytes_retransmit=9 bytes_invalid=0 send_seq=1138321 receive_seq=1138321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=15848 freq=400007847 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120201 bytes_read=372130 bytes_retransmit=0 bytes_invalid=0 send_seq=20009 receive_seq=20009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49997838 sd_pos=3108781 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.30 cputime=5887.763 memavail=3262060 print_time=19648.913 buffer_time=3.058 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
Stats 65614.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59573822 bytes_read=9304417 bytes_retransmit=9 bytes_invalid=0 send_seq=1138428 receive_seq=1138428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=10788 freq=400007838 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120207 bytes_read=372146 bytes_retransmit=0 bytes_invalid=0 send_seq=20010 receive_seq=20010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49997853 sd_pos=3108781 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.30 cputime=5887.797 memavail=3262060 print_time=19648.913 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.3 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65615.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59584195 bytes_read=9305529 bytes_retransmit=9 bytes_invalid=0 send_seq=1138610 receive_seq=1138610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=12369 freq=400007837 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120213 bytes_read=372162 bytes_retransmit=0 bytes_invalid=0 send_seq=20011 receive_seq=20011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49997860 sd_pos=3112485 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.30 cputime=5887.896 memavail=3262060 print_time=19650.006 buffer_time=2.150 print_stall=0 extruder: target=210 temp=208.9 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65616.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59594952 bytes_read=9306676 bytes_retransmit=9 bytes_invalid=0 send_seq=1138796 receive_seq=1138796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=10009 freq=400007825 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120219 bytes_read=372191 bytes_retransmit=0 bytes_invalid=0 send_seq=20012 receive_seq=20012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998954 adj=49997896 sd_pos=3115884 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.30 cputime=5887.996 memavail=3262060 print_time=19650.893 buffer_time=2.037 print_stall=0 extruder: target=210 temp=208.8 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65617.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59606087 bytes_read=9307869 bytes_retransmit=9 bytes_invalid=0 send_seq=1138990 receive_seq=1138989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=10769 freq=400007815 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120225 bytes_read=372207 bytes_retransmit=0 bytes_invalid=0 send_seq=20013 receive_seq=20013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49997899 sd_pos=3117942 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.30 cputime=5888.097 memavail=3262060 print_time=19651.954 buffer_time=2.096 print_stall=0 extruder: target=210 temp=208.7 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65618.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59615441 bytes_read=9308905 bytes_retransmit=9 bytes_invalid=0 send_seq=1139156 receive_seq=1139156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9483 freq=400007987 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120231 bytes_read=372223 bytes_retransmit=0 bytes_invalid=0 send_seq=20014 receive_seq=20014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49997939 sd_pos=3120903 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.27 cputime=5888.260 memavail=3262308 print_time=19652.982 buffer_time=2.124 print_stall=0 extruder: target=210 temp=208.9 pwm=0.430
Stats 65619.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59626514 bytes_read=9310087 bytes_retransmit=9 bytes_invalid=0 send_seq=1139350 receive_seq=1139349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=4885 freq=400008041 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120237 bytes_read=372239 bytes_retransmit=0 bytes_invalid=0 send_seq=20015 receive_seq=20015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49997705 sd_pos=3123686 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.27 cputime=5888.338 memavail=3266344 print_time=19654.022 buffer_time=2.164 print_stall=0 extruder: target=210 temp=209.1 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65620.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59634225 bytes_read=9310968 bytes_retransmit=9 bytes_invalid=0 send_seq=1139482 receive_seq=1139482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=10678 freq=400008006 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120243 bytes_read=372255 bytes_retransmit=0 bytes_invalid=0 send_seq=20016 receive_seq=20016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49997666 sd_pos=3125653 heater_bed: target=60 temp=60.0 pwm=0.266 sysload=0.27 cputime=5888.442 memavail=3266344 print_time=19655.367 buffer_time=2.508 print_stall=0 extruder: target=210 temp=209.7 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65621.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=59640443 bytes_read=9311735 bytes_retransmit=9 bytes_invalid=0 send_seq=1139595 receive_seq=1139595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=16776 freq=400007970 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120249 bytes_read=372284 bytes_retransmit=0 bytes_invalid=0 send_seq=20017 receive_seq=20017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49997806 sd_pos=3127807 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.27 cputime=5888.530 memavail=3266344 print_time=19656.529 buffer_time=2.670 print_stall=0 extruder: target=210 temp=210.3 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65622.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59650016 bytes_read=9312824 bytes_retransmit=9 bytes_invalid=0 send_seq=1139764 receive_seq=1139764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=14299 freq=400007925 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120261 bytes_read=372316 bytes_retransmit=0 bytes_invalid=0 send_seq=20019 receive_seq=20019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49997879 sd_pos=3130846 heater_bed: target=60 temp=60.0 pwm=0.255 sysload=0.27 cputime=5888.621 memavail=3266344 print_time=19657.233 buffer_time=2.373 print_stall=0 extruder: target=210 temp=210.7 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65623.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59661690 bytes_read=9314010 bytes_retransmit=9 bytes_invalid=0 send_seq=1139958 receive_seq=1139958 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=12461 freq=400007899 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120267 bytes_read=372332 bytes_retransmit=0 bytes_invalid=0 send_seq=20020 receive_seq=20020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49997940 sd_pos=3134099 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.33 cputime=5888.740 memavail=3266344 print_time=19658.253 buffer_time=2.392 print_stall=0 extruder: target=210 temp=211.0 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65624.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59671999 bytes_read=9315112 bytes_retransmit=9 bytes_invalid=0 send_seq=1140138 receive_seq=1140138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=12002 freq=400007883 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120273 bytes_read=372348 bytes_retransmit=0 bytes_invalid=0 send_seq=20021 receive_seq=20021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998015 sd_pos=3135459 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.33 cputime=5888.891 memavail=3266344 print_time=19659.109 buffer_time=2.247 print_stall=0 extruder: target=210 temp=211.1 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65625.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59681586 bytes_read=9316179 bytes_retransmit=9 bytes_invalid=0 send_seq=1140308 receive_seq=1140308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=7688 freq=400007871 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120279 bytes_read=372364 bytes_retransmit=0 bytes_invalid=0 send_seq=20022 receive_seq=20022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998030 sd_pos=3135689 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.33 cputime=5889.076 memavail=3265336 print_time=19660.015 buffer_time=2.153 print_stall=0 extruder: target=210 temp=211.0 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65626.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59691890 bytes_read=9317295 bytes_retransmit=9 bytes_invalid=0 send_seq=1140489 receive_seq=1140488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1467 freq=400007852 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120285 bytes_read=372393 bytes_retransmit=0 bytes_invalid=0 send_seq=20023 receive_seq=20023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998053 sd_pos=3135949 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.33 cputime=5889.259 memavail=3264328 print_time=19660.935 buffer_time=2.072 print_stall=0 extruder: target=210 temp=210.8 pwm=0.286
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65627.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59698383 bytes_read=9318058 bytes_retransmit=9 bytes_invalid=0 send_seq=1140597 receive_seq=1140597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=314 freq=400007825 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120291 bytes_read=372409 bytes_retransmit=0 bytes_invalid=0 send_seq=20024 receive_seq=20024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998060 sd_pos=3136072 heater_bed: target=60 temp=60.0 pwm=0.264 sysload=0.33 cputime=5889.471 memavail=3264328 print_time=19662.049 buffer_time=2.186 print_stall=0 extruder: target=210 temp=210.7 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65628.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59702206 bytes_read=9318641 bytes_retransmit=9 bytes_invalid=0 send_seq=1140671 receive_seq=1140671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2793 freq=400007807 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120297 bytes_read=372425 bytes_retransmit=0 bytes_invalid=0 send_seq=20025 receive_seq=20025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998081 sd_pos=3137846 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.38 cputime=5889.620 memavail=3263864 print_time=19663.211 buffer_time=2.346 print_stall=0 extruder: target=210 temp=210.4 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65629.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59707172 bytes_read=9319327 bytes_retransmit=9 bytes_invalid=0 send_seq=1140765 receive_seq=1140765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=3043 freq=400007790 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120303 bytes_read=372441 bytes_retransmit=0 bytes_invalid=0 send_seq=20026 receive_seq=20026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998072 sd_pos=3140403 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.38 cputime=5889.699 memavail=3263864 print_time=19663.985 buffer_time=2.120 print_stall=0 extruder: target=210 temp=209.9 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65630.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59712176 bytes_read=9319999 bytes_retransmit=9 bytes_invalid=0 send_seq=1140859 receive_seq=1140859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=16243 freq=400007819 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120309 bytes_read=372457 bytes_retransmit=0 bytes_invalid=0 send_seq=20027 receive_seq=20027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998145 sd_pos=3144623 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.38 cputime=5889.911 memavail=3263864 print_time=19666.195 buffer_time=3.322 print_stall=0 extruder: target=210 temp=209.6 pwm=0.409
Stats 65631.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59719486 bytes_read=9320871 bytes_retransmit=9 bytes_invalid=0 send_seq=1140990 receive_seq=1140990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=9758 freq=400007805 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120315 bytes_read=372486 bytes_retransmit=0 bytes_invalid=0 send_seq=20028 receive_seq=20028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998962 adj=49998034 sd_pos=3144623 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.38 cputime=5889.954 memavail=3263864 print_time=19666.195 buffer_time=2.321 print_stall=0 extruder: target=210 temp=209.1 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65632.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59725589 bytes_read=9321663 bytes_retransmit=9 bytes_invalid=0 send_seq=1141103 receive_seq=1141102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=15696 freq=400007782 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120321 bytes_read=372502 bytes_retransmit=0 bytes_invalid=0 send_seq=20029 receive_seq=20029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998037 sd_pos=3147880 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.38 cputime=5890.044 memavail=3263864 print_time=19667.348 buffer_time=2.474 print_stall=0 extruder: target=210 temp=208.9 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65633.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59736689 bytes_read=9322800 bytes_retransmit=9 bytes_invalid=0 send_seq=1141289 receive_seq=1141289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=11229 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120327 bytes_read=372518 bytes_retransmit=0 bytes_invalid=0 send_seq=20030 receive_seq=20030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998055 sd_pos=3150894 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.35 cputime=5890.144 memavail=3263864 print_time=19668.051 buffer_time=2.176 print_stall=0 extruder: target=210 temp=208.8 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65634.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59747268 bytes_read=9323892 bytes_retransmit=9 bytes_invalid=0 send_seq=1141464 receive_seq=1141464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=13982 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120333 bytes_read=372534 bytes_retransmit=0 bytes_invalid=0 send_seq=20031 receive_seq=20031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998056 sd_pos=3153800 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.35 cputime=5890.251 memavail=3263864 print_time=19669.296 buffer_time=2.420 print_stall=0 extruder: target=210 temp=208.7 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65635.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59757074 bytes_read=9324973 bytes_retransmit=9 bytes_invalid=0 send_seq=1141637 receive_seq=1141637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14167 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120339 bytes_read=372550 bytes_retransmit=0 bytes_invalid=0 send_seq=20032 receive_seq=20032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998042 sd_pos=3156653 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.35 cputime=5890.350 memavail=3263864 print_time=19670.390 buffer_time=2.514 print_stall=0 extruder: target=210 temp=208.9 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65636.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59767697 bytes_read=9326085 bytes_retransmit=9 bytes_invalid=0 send_seq=1141819 receive_seq=1141819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=9150 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120345 bytes_read=372579 bytes_retransmit=0 bytes_invalid=0 send_seq=20033 receive_seq=20033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998039 sd_pos=3159140 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.35 cputime=5890.478 memavail=3263864 print_time=19671.122 buffer_time=2.244 print_stall=0 extruder: target=210 temp=209.2 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65637.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59778191 bytes_read=9327238 bytes_retransmit=9 bytes_invalid=0 send_seq=1142003 receive_seq=1142003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=11149 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120351 bytes_read=372594 bytes_retransmit=0 bytes_invalid=0 send_seq=20034 receive_seq=20034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49998105 sd_pos=3162503 heater_bed: target=60 temp=60.0 pwm=0.357 sysload=0.35 cputime=5890.654 memavail=3263864 print_time=19672.474 buffer_time=2.596 print_stall=0 extruder: target=210 temp=209.6 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65638.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59785849 bytes_read=9328136 bytes_retransmit=9 bytes_invalid=0 send_seq=1142140 receive_seq=1142140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18567 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120357 bytes_read=372609 bytes_retransmit=0 bytes_invalid=0 send_seq=20035 receive_seq=20035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49998069 sd_pos=3165597 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.32 cputime=5890.757 memavail=3268392 print_time=19673.824 buffer_time=2.945 print_stall=0 extruder: target=210 temp=210.2 pwm=0.246
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65639.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59793159 bytes_read=9328951 bytes_retransmit=9 bytes_invalid=0 send_seq=1142263 receive_seq=1142263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=20436 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120363 bytes_read=372624 bytes_retransmit=0 bytes_invalid=0 send_seq=20036 receive_seq=20036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998958 adj=49998055 sd_pos=3169923 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.32 cputime=5890.849 memavail=3268268 print_time=19674.747 buffer_time=2.867 print_stall=0 extruder: target=210 temp=210.5 pwm=0.246
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65640.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59804951 bytes_read=9330188 bytes_retransmit=9 bytes_invalid=0 send_seq=1142467 receive_seq=1142467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=23987 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120369 bytes_read=372639 bytes_retransmit=0 bytes_invalid=0 send_seq=20037 receive_seq=20037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998059 sd_pos=3173725 heater_bed: target=60 temp=60.0 pwm=0.248 sysload=0.32 cputime=5890.956 memavail=3268028 print_time=19676.132 buffer_time=3.252 print_stall=0 extruder: target=210 temp=211.0 pwm=0.246
Stats 65641.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59816816 bytes_read=9331389 bytes_retransmit=9 bytes_invalid=0 send_seq=1142664 receive_seq=1142664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=13237 freq=400007709 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120375 bytes_read=372667 bytes_retransmit=0 bytes_invalid=0 send_seq=20038 receive_seq=20038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998956 adj=49998041 sd_pos=3173725 heater_bed: target=60 temp=60.0 pwm=0.053 sysload=0.32 cputime=5891.004 memavail=3267528 print_time=19676.132 buffer_time=2.251 print_stall=0 extruder: target=210 temp=211.1 pwm=0.246
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65642.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59826723 bytes_read=9332482 bytes_retransmit=9 bytes_invalid=0 send_seq=1142839 receive_seq=1142839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=14117 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120381 bytes_read=372683 bytes_retransmit=0 bytes_invalid=0 send_seq=20039 receive_seq=20039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998004 sd_pos=3175552 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.32 cputime=5891.099 memavail=3267528 print_time=19677.001 buffer_time=2.120 print_stall=0 extruder: target=210 temp=211.0 pwm=0.246
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65643.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59838115 bytes_read=9333659 bytes_retransmit=9 bytes_invalid=0 send_seq=1143031 receive_seq=1143031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=8092 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120387 bytes_read=372699 bytes_retransmit=0 bytes_invalid=0 send_seq=20040 receive_seq=20040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998050 sd_pos=3175818 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.30 cputime=5891.339 memavail=3267024 print_time=19677.916 buffer_time=2.034 print_stall=0 extruder: target=210 temp=211.0 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65644.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59850127 bytes_read=9334915 bytes_retransmit=9 bytes_invalid=0 send_seq=1143239 receive_seq=1143239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2957 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120393 bytes_read=372715 bytes_retransmit=0 bytes_invalid=0 send_seq=20041 receive_seq=20041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998054 sd_pos=3176206 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.30 cputime=5891.571 memavail=3266020 print_time=19679.235 buffer_time=2.352 print_stall=0 extruder: target=210 temp=210.6 pwm=0.339
Stats 65645.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59855811 bytes_read=9335647 bytes_retransmit=9 bytes_invalid=0 send_seq=1143345 receive_seq=1143345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=789 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120399 bytes_read=372731 bytes_retransmit=0 bytes_invalid=0 send_seq=20042 receive_seq=20042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998059 sd_pos=3176351 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.30 cputime=5891.750 memavail=3266020 print_time=19680.022 buffer_time=2.138 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65646.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59860525 bytes_read=9336314 bytes_retransmit=9 bytes_invalid=0 send_seq=1143435 receive_seq=1143435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3438 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120405 bytes_read=372760 bytes_retransmit=0 bytes_invalid=0 send_seq=20043 receive_seq=20043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998081 sd_pos=3178692 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.30 cputime=5891.904 memavail=3266020 print_time=19681.334 buffer_time=2.450 print_stall=0 extruder: target=210 temp=210.1 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65647.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59865284 bytes_read=9336996 bytes_retransmit=9 bytes_invalid=0 send_seq=1143525 receive_seq=1143525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=3400 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120411 bytes_read=372776 bytes_retransmit=0 bytes_invalid=0 send_seq=20044 receive_seq=20044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998072 sd_pos=3181193 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.30 cputime=5891.962 memavail=3266020 print_time=19681.970 buffer_time=2.085 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65648.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59870231 bytes_read=9337668 bytes_retransmit=9 bytes_invalid=0 send_seq=1143619 receive_seq=1143619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=11639 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120417 bytes_read=372792 bytes_retransmit=0 bytes_invalid=0 send_seq=20045 receive_seq=20045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998101 sd_pos=3184680 heater_bed: target=60 temp=60.0 pwm=0.265 sysload=0.27 cputime=5892.088 memavail=3270672 print_time=19683.494 buffer_time=2.609 print_stall=0 extruder: target=210 temp=209.4 pwm=0.447
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65649.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59877999 bytes_read=9338545 bytes_retransmit=9 bytes_invalid=0 send_seq=1143752 receive_seq=1143752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=18862 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120423 bytes_read=372808 bytes_retransmit=0 bytes_invalid=0 send_seq=20046 receive_seq=20046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49998069 sd_pos=3187901 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5892.185 memavail=3270676 print_time=19684.835 buffer_time=2.949 print_stall=0 extruder: target=210 temp=209.2 pwm=0.447
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65650.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59885750 bytes_read=9339466 bytes_retransmit=9 bytes_invalid=0 send_seq=1143893 receive_seq=1143893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=20322 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120429 bytes_read=372824 bytes_retransmit=0 bytes_invalid=0 send_seq=20047 receive_seq=20047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998957 adj=49998057 sd_pos=3192488 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.27 cputime=5892.273 memavail=3270676 print_time=19685.779 buffer_time=2.892 print_stall=0 extruder: target=210 temp=208.9 pwm=0.447
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65651.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=59897514 bytes_read=9340643 bytes_retransmit=9 bytes_invalid=0 send_seq=1144088 receive_seq=1144088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=24272 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120435 bytes_read=372853 bytes_retransmit=0 bytes_invalid=0 send_seq=20048 receive_seq=20048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998059 sd_pos=3196471 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.27 cputime=5892.380 memavail=3270676 print_time=19687.218 buffer_time=3.330 print_stall=0 extruder: target=210 temp=208.9 pwm=0.447
Stats 65652.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59909133 bytes_read=9341891 bytes_retransmit=9 bytes_invalid=0 send_seq=1144291 receive_seq=1144291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13825 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120441 bytes_read=372869 bytes_retransmit=0 bytes_invalid=0 send_seq=20049 receive_seq=20049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998962 adj=49998061 sd_pos=3196471 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.27 cputime=5892.431 memavail=3270676 print_time=19687.218 buffer_time=2.329 print_stall=0 extruder: target=210 temp=209.0 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65653.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59918958 bytes_read=9342927 bytes_retransmit=9 bytes_invalid=0 send_seq=1144455 receive_seq=1144455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15352 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120447 bytes_read=372885 bytes_retransmit=0 bytes_invalid=0 send_seq=20050 receive_seq=20050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998051 sd_pos=3198691 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.25 cputime=5892.532 memavail=3270676 print_time=19688.218 buffer_time=2.328 print_stall=0 extruder: target=210 temp=209.2 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65654.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59930523 bytes_read=9344134 bytes_retransmit=9 bytes_invalid=0 send_seq=1144656 receive_seq=1144656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12091 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120453 bytes_read=372901 bytes_retransmit=0 bytes_invalid=0 send_seq=20051 receive_seq=20051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998962 adj=49998040 sd_pos=3201938 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.25 cputime=5892.700 memavail=3270676 print_time=19689.248 buffer_time=2.357 print_stall=0 extruder: target=210 temp=209.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65655.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59942285 bytes_read=9345385 bytes_retransmit=9 bytes_invalid=0 send_seq=1144860 receive_seq=1144860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=15594 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120459 bytes_read=372917 bytes_retransmit=0 bytes_invalid=0 send_seq=20052 receive_seq=20052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998002 sd_pos=3206309 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.25 cputime=5892.919 memavail=3270676 print_time=19691.020 buffer_time=3.059 print_stall=0 extruder: target=210 temp=209.8 pwm=0.360
Stats 65656.6: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59950802 bytes_read=9346292 bytes_retransmit=9 bytes_invalid=0 send_seq=1145001 receive_seq=1145001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7997 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120465 bytes_read=372946 bytes_retransmit=0 bytes_invalid=0 send_seq=20053 receive_seq=20053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998050 sd_pos=3206309 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.25 cputime=5892.960 memavail=3270676 print_time=19691.020 buffer_time=2.059 print_stall=0 extruder: target=210 temp=210.2 pwm=0.304
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65657.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59957118 bytes_read=9347065 bytes_retransmit=9 bytes_invalid=0 send_seq=1145109 receive_seq=1145109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=16827 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120471 bytes_read=372962 bytes_retransmit=0 bytes_invalid=0 send_seq=20054 receive_seq=20054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998060 sd_pos=3208817 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.25 cputime=5893.065 memavail=3270676 print_time=19692.347 buffer_time=2.386 print_stall=0 extruder: target=210 temp=210.6 pwm=0.254
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65658.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59968760 bytes_read=9348301 bytes_retransmit=9 bytes_invalid=0 send_seq=1145313 receive_seq=1145313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=18439 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120477 bytes_read=372978 bytes_retransmit=0 bytes_invalid=0 send_seq=20055 receive_seq=20055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998065 sd_pos=3211493 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.23 cputime=5893.176 memavail=3269696 print_time=19693.466 buffer_time=2.503 print_stall=0 extruder: target=210 temp=210.9 pwm=0.254
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65659.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59980927 bytes_read=9349568 bytes_retransmit=9 bytes_invalid=0 send_seq=1145526 receive_seq=1145526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12461 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120483 bytes_read=372994 bytes_retransmit=0 bytes_invalid=0 send_seq=20056 receive_seq=20056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998063 sd_pos=3213489 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.23 cputime=5893.265 memavail=3269712 print_time=19694.083 buffer_time=2.120 print_stall=0 extruder: target=210 temp=211.0 pwm=0.254
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65660.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=59992954 bytes_read=9350830 bytes_retransmit=9 bytes_invalid=0 send_seq=1145736 receive_seq=1145736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=5987 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120489 bytes_read=373010 bytes_retransmit=0 bytes_invalid=0 send_seq=20057 receive_seq=20057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998050 sd_pos=3213731 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.23 cputime=5893.456 memavail=3269712 print_time=19694.990 buffer_time=2.026 print_stall=0 extruder: target=210 temp=211.0 pwm=0.254
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65661.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60002856 bytes_read=9351916 bytes_retransmit=9 bytes_invalid=0 send_seq=1145910 receive_seq=1145910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=2756 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=120495 bytes_read=373039 bytes_retransmit=0 bytes_invalid=0 send_seq=20058 receive_seq=20058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998091 sd_pos=3214134 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.23 cputime=5893.723 memavail=3268704 print_time=19696.315 buffer_time=2.350 print_stall=0 extruder: target=210 temp=210.8 pwm=0.306
Stats 65662.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60008300 bytes_read=9352639 bytes_retransmit=9 bytes_invalid=0 send_seq=1146011 receive_seq=1146011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=444 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=120501 bytes_read=373055 bytes_retransmit=0 bytes_invalid=0 send_seq=20059 receive_seq=20059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998057 sd_pos=3214225 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.23 cputime=5893.896 memavail=3268704 print_time=19697.076 buffer_time=2.111 print_stall=0 extruder: target=210 temp=210.7 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65663.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60012937 bytes_read=9353296 bytes_retransmit=9 bytes_invalid=0 send_seq=1146099 receive_seq=1146099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2162 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=120507 bytes_read=373071 bytes_retransmit=0 bytes_invalid=0 send_seq=20060 receive_seq=20060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998962 adj=49998050 sd_pos=3215953 heater_bed: target=60 temp=60.0 pwm=0.325 sysload=0.29 cputime=5894.047 memavail=3267456 print_time=19698.252 buffer_time=2.286 print_stall=0 extruder: target=210 temp=210.5 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65664.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60017526 bytes_read=9353942 bytes_retransmit=9 bytes_invalid=0 send_seq=1146186 receive_seq=1146185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2913 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=120513 bytes_read=373087 bytes_retransmit=0 bytes_invalid=0 send_seq=20061 receive_seq=20061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998002 sd_pos=3218585 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=0.29 cputime=5894.107 memavail=3267456 print_time=19699.020 buffer_time=2.053 print_stall=0 extruder: target=210 temp=210.1 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65665.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60022827 bytes_read=9354644 bytes_retransmit=9 bytes_invalid=0 send_seq=1146285 receive_seq=1146285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=10546 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=120519 bytes_read=373103 bytes_retransmit=0 bytes_invalid=0 send_seq=20062 receive_seq=20062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49998005 sd_pos=3222067 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=0.29 cputime=5894.206 memavail=3267456 print_time=19700.490 buffer_time=2.522 print_stall=0 extruder: target=210 temp=209.7 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65666.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60029848 bytes_read=9355496 bytes_retransmit=9 bytes_invalid=0 send_seq=1146412 receive_seq=1146412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=16195 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120525 bytes_read=373132 bytes_retransmit=0 bytes_invalid=0 send_seq=20063 receive_seq=20063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998001 sd_pos=3224731 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.29 cputime=5894.340 memavail=3267456 print_time=19701.582 buffer_time=2.614 print_stall=0 extruder: target=210 temp=209.5 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65667.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60038338 bytes_read=9356438 bytes_retransmit=9 bytes_invalid=0 send_seq=1146554 receive_seq=1146554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=20476 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120531 bytes_read=373148 bytes_retransmit=0 bytes_invalid=0 send_seq=20064 receive_seq=20064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998048 sd_pos=3227147 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.29 cputime=5894.439 memavail=3267456 print_time=19702.734 buffer_time=2.766 print_stall=0 extruder: target=210 temp=209.1 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65668.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60050353 bytes_read=9357685 bytes_retransmit=9 bytes_invalid=0 send_seq=1146763 receive_seq=1146763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=16740 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120537 bytes_read=373164 bytes_retransmit=0 bytes_invalid=0 send_seq=20065 receive_seq=20065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998024 sd_pos=3229141 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.27 cputime=5894.528 memavail=3266700 print_time=19703.606 buffer_time=2.637 print_stall=0 extruder: target=210 temp=209.0 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65669.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60061654 bytes_read=9358897 bytes_retransmit=9 bytes_invalid=0 send_seq=1146962 receive_seq=1146962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=14115 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120543 bytes_read=373180 bytes_retransmit=0 bytes_invalid=0 send_seq=20066 receive_seq=20066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998021 sd_pos=3231770 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.27 cputime=5894.614 memavail=3266708 print_time=19704.508 buffer_time=2.525 print_stall=0 extruder: target=210 temp=209.0 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65670.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60072918 bytes_read=9360096 bytes_retransmit=9 bytes_invalid=0 send_seq=1147159 receive_seq=1147159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=7645 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120549 bytes_read=373196 bytes_retransmit=0 bytes_invalid=0 send_seq=20067 receive_seq=20067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998070 sd_pos=3233573 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.27 cputime=5894.681 memavail=3266708 print_time=19705.031 buffer_time=2.047 print_stall=0 extruder: target=210 temp=209.3 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65671.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60082812 bytes_read=9361160 bytes_retransmit=9 bytes_invalid=0 send_seq=1147332 receive_seq=1147332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=14828 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120555 bytes_read=373225 bytes_retransmit=0 bytes_invalid=0 send_seq=20068 receive_seq=20068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998037 sd_pos=3237749 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.27 cputime=5894.841 memavail=3266708 print_time=19706.910 buffer_time=2.925 print_stall=0 extruder: target=210 temp=209.5 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65672.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60090441 bytes_read=9362038 bytes_retransmit=9 bytes_invalid=0 send_seq=1147461 receive_seq=1147461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=22095 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120561 bytes_read=373241 bytes_retransmit=0 bytes_invalid=0 send_seq=20069 receive_seq=20069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998020 sd_pos=3239758 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.27 cputime=5894.955 memavail=3266708 print_time=19708.121 buffer_time=3.134 print_stall=0 extruder: target=210 temp=209.8 pwm=0.322
Stats 65673.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60098273 bytes_read=9362944 bytes_retransmit=9 bytes_invalid=0 send_seq=1147599 receive_seq=1147599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=15113 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120567 bytes_read=373257 bytes_retransmit=0 bytes_invalid=0 send_seq=20070 receive_seq=20070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49998004 sd_pos=3239758 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.25 cputime=5894.996 memavail=3266708 print_time=19708.121 buffer_time=2.133 print_stall=0 extruder: target=210 temp=210.4 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65674.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60110312 bytes_read=9364146 bytes_retransmit=9 bytes_invalid=0 send_seq=1147799 receive_seq=1147799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=16490 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120573 bytes_read=373273 bytes_retransmit=0 bytes_invalid=0 send_seq=20071 receive_seq=20071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49997988 sd_pos=3242110 heater_bed: target=60 temp=60.0 pwm=0.258 sysload=0.25 cputime=5895.122 memavail=3266468 print_time=19709.239 buffer_time=2.249 print_stall=0 extruder: target=210 temp=210.7 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65675.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60123121 bytes_read=9365433 bytes_retransmit=9 bytes_invalid=0 send_seq=1148013 receive_seq=1148013 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=12777 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120579 bytes_read=373289 bytes_retransmit=0 bytes_invalid=0 send_seq=20072 receive_seq=20072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998959 adj=49997994 sd_pos=3243249 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.25 cputime=5895.257 memavail=3266216 print_time=19710.153 buffer_time=2.162 print_stall=0 extruder: target=210 temp=211.0 pwm=0.261
Stats 65676.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60135047 bytes_read=9366674 bytes_retransmit=9 bytes_invalid=0 send_seq=1148218 receive_seq=1148218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=5407 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120585 bytes_read=373318 bytes_retransmit=0 bytes_invalid=0 send_seq=20073 receive_seq=20073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997983 sd_pos=3243449 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.25 cputime=5895.538 memavail=3265476 print_time=19711.178 buffer_time=2.187 print_stall=0 extruder: target=210 temp=211.0 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65677.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60145452 bytes_read=9367762 bytes_retransmit=9 bytes_invalid=0 send_seq=1148392 receive_seq=1148392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=0 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120591 bytes_read=373334 bytes_retransmit=0 bytes_invalid=0 send_seq=20074 receive_seq=20074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998047 sd_pos=3243964 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.25 cputime=5895.682 memavail=3265476 print_time=19712.031 buffer_time=2.039 print_stall=0 extruder: target=210 temp=211.1 pwm=0.277
Stats 65678.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60149210 bytes_read=9368309 bytes_retransmit=9 bytes_invalid=0 send_seq=1148458 receive_seq=1148458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=63 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120597 bytes_read=373350 bytes_retransmit=0 bytes_invalid=0 send_seq=20075 receive_seq=20075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998001 sd_pos=3244009 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.23 cputime=5895.880 memavail=3265256 print_time=19713.022 buffer_time=2.029 print_stall=0 extruder: target=210 temp=211.0 pwm=0.277
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65679.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60154355 bytes_read=9369021 bytes_retransmit=9 bytes_invalid=0 send_seq=1148555 receive_seq=1148555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=836 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120609 bytes_read=373382 bytes_retransmit=0 bytes_invalid=0 send_seq=20077 receive_seq=20077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998023 sd_pos=3245797 heater_bed: target=60 temp=60.0 pwm=0.289 sysload=0.23 cputime=5895.987 memavail=3265256 print_time=19713.993 buffer_time=1.999 print_stall=0 extruder: target=210 temp=210.7 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65680.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60158238 bytes_read=9369593 bytes_retransmit=9 bytes_invalid=0 send_seq=1148629 receive_seq=1148629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=4158 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120615 bytes_read=373398 bytes_retransmit=0 bytes_invalid=0 send_seq=20078 receive_seq=20078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998022 sd_pos=3249884 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.23 cputime=5896.054 memavail=3265256 print_time=19715.041 buffer_time=2.047 print_stall=0 extruder: target=210 temp=210.3 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65681.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60164611 bytes_read=9370386 bytes_retransmit=9 bytes_invalid=0 send_seq=1148745 receive_seq=1148745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=11412 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=120621 bytes_read=373427 bytes_retransmit=0 bytes_invalid=0 send_seq=20079 receive_seq=20079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998042 sd_pos=3251952 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.23 cputime=5896.162 memavail=3265404 print_time=19716.357 buffer_time=2.362 print_stall=0 extruder: target=210 temp=210.0 pwm=0.388
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65682.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60172135 bytes_read=9371292 bytes_retransmit=9 bytes_invalid=0 send_seq=1148880 receive_seq=1148880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=19067 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=120627 bytes_read=373443 bytes_retransmit=0 bytes_invalid=0 send_seq=20080 receive_seq=20080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998083 sd_pos=3253955 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.23 cputime=5896.338 memavail=3265508 print_time=19717.641 buffer_time=2.645 print_stall=0 extruder: target=210 temp=209.4 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65683.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60182694 bytes_read=9372424 bytes_retransmit=9 bytes_invalid=0 send_seq=1149066 receive_seq=1149066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=21537 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=120633 bytes_read=373459 bytes_retransmit=0 bytes_invalid=0 send_seq=20081 receive_seq=20081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998070 sd_pos=3256079 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.21 cputime=5896.454 memavail=3265508 print_time=19718.734 buffer_time=2.738 print_stall=0 extruder: target=210 temp=209.1 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65684.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60195248 bytes_read=9373731 bytes_retransmit=9 bytes_invalid=0 send_seq=1149284 receive_seq=1149284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=17484 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=120639 bytes_read=373475 bytes_retransmit=0 bytes_invalid=0 send_seq=20082 receive_seq=20082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998048 sd_pos=3257769 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.21 cputime=5896.554 memavail=3265508 print_time=19719.462 buffer_time=2.465 print_stall=0 extruder: target=210 temp=208.9 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65685.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60207059 bytes_read=9374947 bytes_retransmit=9 bytes_invalid=0 send_seq=1149484 receive_seq=1149484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12496 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=120645 bytes_read=373491 bytes_retransmit=0 bytes_invalid=0 send_seq=20083 receive_seq=20083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998001 sd_pos=3260139 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.21 cputime=5896.634 memavail=3265508 print_time=19720.327 buffer_time=2.319 print_stall=0 extruder: target=210 temp=208.8 pwm=0.457
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65686.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60219577 bytes_read=9376245 bytes_retransmit=9 bytes_invalid=0 send_seq=1149700 receive_seq=1149700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=6076 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120651 bytes_read=373520 bytes_retransmit=0 bytes_invalid=0 send_seq=20084 receive_seq=20084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998010 sd_pos=3262756 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.21 cputime=5896.710 memavail=3265260 print_time=19721.090 buffer_time=2.081 print_stall=0 extruder: target=210 temp=208.8 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65687.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60227844 bytes_read=9377187 bytes_retransmit=9 bytes_invalid=0 send_seq=1149845 receive_seq=1149845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=17664 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120657 bytes_read=373536 bytes_retransmit=0 bytes_invalid=0 send_seq=20085 receive_seq=20085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49997980 sd_pos=3266889 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.21 cputime=5896.875 memavail=3265268 print_time=19723.099 buffer_time=3.090 print_stall=0 extruder: target=210 temp=209.0 pwm=0.413
Stats 65688.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60235175 bytes_read=9378038 bytes_retransmit=9 bytes_invalid=0 send_seq=1149972 receive_seq=1149972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11136 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120663 bytes_read=373552 bytes_retransmit=0 bytes_invalid=0 send_seq=20086 receive_seq=20086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49997979 sd_pos=3266889 heater_bed: target=60 temp=60.0 pwm=0.219 sysload=0.19 cputime=5896.915 memavail=3265016 print_time=19723.099 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.5 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65689.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60243808 bytes_read=9379000 bytes_retransmit=9 bytes_invalid=0 send_seq=1150124 receive_seq=1150124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=18648 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120669 bytes_read=373568 bytes_retransmit=0 bytes_invalid=0 send_seq=20087 receive_seq=20087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998960 adj=49997975 sd_pos=3269408 heater_bed: target=60 temp=60.0 pwm=0.369 sysload=0.19 cputime=5897.020 memavail=3265016 print_time=19724.478 buffer_time=2.467 print_stall=0 extruder: target=210 temp=209.8 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65690.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60256207 bytes_read=9380277 bytes_retransmit=9 bytes_invalid=0 send_seq=1150336 receive_seq=1150336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=21236 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120675 bytes_read=373584 bytes_retransmit=0 bytes_invalid=0 send_seq=20088 receive_seq=20088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49997967 sd_pos=3271849 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.19 cputime=5897.132 memavail=3265016 print_time=19725.813 buffer_time=2.801 print_stall=0 extruder: target=210 temp=210.2 pwm=0.282
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65691.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60268522 bytes_read=9381594 bytes_retransmit=9 bytes_invalid=0 send_seq=1150553 receive_seq=1150553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=20637 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120681 bytes_read=373613 bytes_retransmit=0 bytes_invalid=0 send_seq=20089 receive_seq=20089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998961 adj=49997995 sd_pos=3273595 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.19 cputime=5897.224 memavail=3265016 print_time=19726.816 buffer_time=2.802 print_stall=0 extruder: target=210 temp=210.6 pwm=0.282
Stats 65692.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60280333 bytes_read=9382825 bytes_retransmit=9 bytes_invalid=0 send_seq=1150760 receive_seq=1150760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=11337 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120687 bytes_read=373629 bytes_retransmit=0 bytes_invalid=0 send_seq=20090 receive_seq=20090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49997988 sd_pos=3273696 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.19 cputime=5897.355 memavail=3265016 print_time=19727.082 buffer_time=2.068 print_stall=0 extruder: target=210 temp=210.9 pwm=0.282
Stats 65693.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60291994 bytes_read=9384062 bytes_retransmit=9 bytes_invalid=0 send_seq=1150964 receive_seq=1150964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=4157 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120693 bytes_read=373645 bytes_retransmit=0 bytes_invalid=0 send_seq=20091 receive_seq=20091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998090 sd_pos=3273829 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.26 cputime=5897.635 memavail=3265016 print_time=19728.089 buffer_time=2.075 print_stall=0 extruder: target=210 temp=211.0 pwm=0.282
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65694.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60301430 bytes_read=9385108 bytes_retransmit=9 bytes_invalid=0 send_seq=1151130 receive_seq=1151130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=458 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120699 bytes_read=373661 bytes_retransmit=0 bytes_invalid=0 send_seq=20092 receive_seq=20092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998061 sd_pos=3274186 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.26 cputime=5897.819 memavail=3265020 print_time=19729.135 buffer_time=2.119 print_stall=0 extruder: target=210 temp=211.1 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65695.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60305255 bytes_read=9385690 bytes_retransmit=9 bytes_invalid=0 send_seq=1151206 receive_seq=1151206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1207 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=120705 bytes_read=373677 bytes_retransmit=0 bytes_invalid=0 send_seq=20093 receive_seq=20093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998031 sd_pos=3274574 heater_bed: target=60 temp=60.0 pwm=0.139 sysload=0.26 cputime=5898.028 memavail=3265020 print_time=19730.340 buffer_time=2.324 print_stall=0 extruder: target=210 temp=211.1 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65696.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60310530 bytes_read=9386397 bytes_retransmit=9 bytes_invalid=0 send_seq=1151304 receive_seq=1151304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3129 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120711 bytes_read=373706 bytes_retransmit=0 bytes_invalid=0 send_seq=20094 receive_seq=20094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998045 sd_pos=3277818 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.26 cputime=5898.098 memavail=3264784 print_time=19731.220 buffer_time=2.204 print_stall=0 extruder: target=210 temp=210.9 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65697.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60314324 bytes_read=9386999 bytes_retransmit=9 bytes_invalid=0 send_seq=1151378 receive_seq=1151378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=17168 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120717 bytes_read=373722 bytes_retransmit=0 bytes_invalid=0 send_seq=20095 receive_seq=20095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998041 sd_pos=3282511 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.26 cputime=5898.216 memavail=3264784 print_time=19733.267 buffer_time=3.219 print_stall=0 extruder: target=210 temp=210.7 pwm=0.361
Stats 65698.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60321918 bytes_read=9387891 bytes_retransmit=9 bytes_invalid=0 send_seq=1151513 receive_seq=1151513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=10420 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120723 bytes_read=373738 bytes_retransmit=0 bytes_invalid=0 send_seq=20096 receive_seq=20096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998043 sd_pos=3282511 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.40 cputime=5898.272 memavail=3264032 print_time=19733.267 buffer_time=2.218 print_stall=0 extruder: target=210 temp=210.3 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65699.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60329039 bytes_read=9388747 bytes_retransmit=9 bytes_invalid=0 send_seq=1151641 receive_seq=1151641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=19681 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120729 bytes_read=373754 bytes_retransmit=0 bytes_invalid=0 send_seq=20097 receive_seq=20097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998044 sd_pos=3285079 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.40 cputime=5898.374 memavail=3264032 print_time=19734.731 buffer_time=2.681 print_stall=0 extruder: target=210 temp=209.8 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65700.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60341313 bytes_read=9390019 bytes_retransmit=9 bytes_invalid=0 send_seq=1151855 receive_seq=1151855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=23187 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120735 bytes_read=373770 bytes_retransmit=0 bytes_invalid=0 send_seq=20098 receive_seq=20098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998052 sd_pos=3287825 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.40 cputime=5898.482 memavail=3264032 print_time=19736.127 buffer_time=3.076 print_stall=0 extruder: target=210 temp=209.5 pwm=0.427
Stats 65701.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60352651 bytes_read=9391222 bytes_retransmit=9 bytes_invalid=0 send_seq=1152049 receive_seq=1152049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=12980 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120741 bytes_read=373799 bytes_retransmit=0 bytes_invalid=0 send_seq=20099 receive_seq=20099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998055 sd_pos=3287825 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.40 cputime=5898.529 memavail=3264032 print_time=19736.127 buffer_time=2.075 print_stall=0 extruder: target=210 temp=209.2 pwm=0.490
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65702.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60364154 bytes_read=9392451 bytes_retransmit=9 bytes_invalid=0 send_seq=1152252 receive_seq=1152252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=14200 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120747 bytes_read=373815 bytes_retransmit=0 bytes_invalid=0 send_seq=20100 receive_seq=20100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998048 sd_pos=3290110 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.40 cputime=5898.617 memavail=3264032 print_time=19737.257 buffer_time=2.204 print_stall=0 extruder: target=210 temp=209.0 pwm=0.490
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65703.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60375938 bytes_read=9393679 bytes_retransmit=9 bytes_invalid=0 send_seq=1152458 receive_seq=1152458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=10858 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120753 bytes_read=373831 bytes_retransmit=0 bytes_invalid=0 send_seq=20101 receive_seq=20101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998036 sd_pos=3293261 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.44 cputime=5898.736 memavail=3264032 print_time=19738.342 buffer_time=2.289 print_stall=0 extruder: target=210 temp=208.9 pwm=0.490
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65704.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60387064 bytes_read=9394866 bytes_retransmit=9 bytes_invalid=0 send_seq=1152652 receive_seq=1152652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=18933 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120759 bytes_read=373847 bytes_retransmit=0 bytes_invalid=0 send_seq=20102 receive_seq=20102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49998035 sd_pos=3297804 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.44 cputime=5898.958 memavail=3264036 print_time=19740.496 buffer_time=3.443 print_stall=0 extruder: target=210 temp=209.1 pwm=0.435
Stats 65705.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60395092 bytes_read=9395797 bytes_retransmit=9 bytes_invalid=0 send_seq=1152795 receive_seq=1152795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=11795 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120765 bytes_read=373863 bytes_retransmit=0 bytes_invalid=0 send_seq=20103 receive_seq=20103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49998089 sd_pos=3297804 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.44 cputime=5899.000 memavail=3264040 print_time=19740.496 buffer_time=2.442 print_stall=0 extruder: target=210 temp=209.5 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65706.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60401663 bytes_read=9396610 bytes_retransmit=9 bytes_invalid=0 send_seq=1152914 receive_seq=1152914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=20877 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120771 bytes_read=373892 bytes_retransmit=0 bytes_invalid=0 send_seq=20104 receive_seq=20104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998067 sd_pos=3300167 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.44 cputime=5899.102 memavail=3264040 print_time=19741.947 buffer_time=2.891 print_stall=0 extruder: target=210 temp=210.0 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65707.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60412906 bytes_read=9397797 bytes_retransmit=9 bytes_invalid=0 send_seq=1153108 receive_seq=1153108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=23002 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120777 bytes_read=373908 bytes_retransmit=0 bytes_invalid=0 send_seq=20105 receive_seq=20105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49998063 sd_pos=3302496 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.44 cputime=5899.211 memavail=3264040 print_time=19743.173 buffer_time=3.116 print_stall=0 extruder: target=210 temp=210.4 pwm=0.245
Stats 65708.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60424516 bytes_read=9399023 bytes_retransmit=9 bytes_invalid=0 send_seq=1153310 receive_seq=1153310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=12538 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120783 bytes_read=373924 bytes_retransmit=0 bytes_invalid=0 send_seq=20106 receive_seq=20106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998970 adj=49998031 sd_pos=3302496 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.41 cputime=5899.260 memavail=3264468 print_time=19743.173 buffer_time=2.116 print_stall=0 extruder: target=210 temp=210.9 pwm=0.245
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65709.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60435827 bytes_read=9400160 bytes_retransmit=9 bytes_invalid=0 send_seq=1153497 receive_seq=1153497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=12272 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120789 bytes_read=373940 bytes_retransmit=0 bytes_invalid=0 send_seq=20107 receive_seq=20107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998009 sd_pos=3304300 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.41 cputime=5899.353 memavail=3264548 print_time=19744.140 buffer_time=2.083 print_stall=0 extruder: target=210 temp=211.1 pwm=0.245
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65710.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=60446775 bytes_read=9401332 bytes_retransmit=9 bytes_invalid=0 send_seq=1153688 receive_seq=1153688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=6857 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120795 bytes_read=373956 bytes_retransmit=0 bytes_invalid=0 send_seq=20108 receive_seq=20108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997999 sd_pos=3304457 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.41 cputime=5899.601 memavail=3263540 print_time=19745.088 buffer_time=2.030 print_stall=0 extruder: target=210 temp=211.2 pwm=0.245
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65711.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60457715 bytes_read=9402499 bytes_retransmit=9 bytes_invalid=0 send_seq=1153875 receive_seq=1153875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2689 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120801 bytes_read=373985 bytes_retransmit=0 bytes_invalid=0 send_seq=20109 receive_seq=20109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997975 sd_pos=3304965 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.41 cputime=5899.837 memavail=3263540 print_time=19746.392 buffer_time=2.333 print_stall=0 extruder: target=210 temp=211.1 pwm=0.290
Stats 65712.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60463019 bytes_read=9403146 bytes_retransmit=9 bytes_invalid=0 send_seq=1153964 receive_seq=1153964 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=762 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120807 bytes_read=374001 bytes_retransmit=0 bytes_invalid=0 send_seq=20110 receive_seq=20110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49997957 sd_pos=3305168 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.41 cputime=5900.012 memavail=3263540 print_time=19747.191 buffer_time=2.130 print_stall=0 extruder: target=210 temp=211.0 pwm=0.290
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65713.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60467522 bytes_read=9403740 bytes_retransmit=9 bytes_invalid=0 send_seq=1154040 receive_seq=1154040 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=2868 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120813 bytes_read=374017 bytes_retransmit=0 bytes_invalid=0 send_seq=20111 receive_seq=20111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997928 sd_pos=3306859 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.38 cputime=5900.161 memavail=3263300 print_time=19748.371 buffer_time=2.310 print_stall=0 extruder: target=210 temp=210.8 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65714.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60472278 bytes_read=9404404 bytes_retransmit=9 bytes_invalid=0 send_seq=1154130 receive_seq=1154130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3585 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120819 bytes_read=374033 bytes_retransmit=0 bytes_invalid=0 send_seq=20112 receive_seq=20112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997923 sd_pos=3309587 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.38 cputime=5900.222 memavail=3263300 print_time=19749.155 buffer_time=2.093 print_stall=0 extruder: target=210 temp=210.3 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65715.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60477917 bytes_read=9405131 bytes_retransmit=9 bytes_invalid=0 send_seq=1154235 receive_seq=1154235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=15690 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=120825 bytes_read=374049 bytes_retransmit=0 bytes_invalid=0 send_seq=20113 receive_seq=20113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49997941 sd_pos=3313431 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.38 cputime=5900.409 memavail=3263300 print_time=19751.096 buffer_time=3.034 print_stall=0 extruder: target=210 temp=210.0 pwm=0.396
Stats 65716.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=60485165 bytes_read=9406024 bytes_retransmit=9 bytes_invalid=0 send_seq=1154367 receive_seq=1154367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=9265 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120831 bytes_read=374078 bytes_retransmit=0 bytes_invalid=0 send_seq=20114 receive_seq=20114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997978 sd_pos=3313431 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.38 cputime=5900.448 memavail=3263300 print_time=19751.096 buffer_time=2.033 print_stall=0 extruder: target=210 temp=209.6 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65717.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=60493286 bytes_read=9406975 bytes_retransmit=9 bytes_invalid=0 send_seq=1154514 receive_seq=1154514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=16479 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120837 bytes_read=374094 bytes_retransmit=0 bytes_invalid=0 send_seq=20115 receive_seq=20115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997966 sd_pos=3316303 heater_bed: target=60 temp=60.0 pwm=0.313 sysload=0.38 cputime=5900.555 memavail=3263300 print_time=19752.524 buffer_time=2.460 print_stall=0 extruder: target=210 temp=209.1 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65718.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=60504770 bytes_read=9408127 bytes_retransmit=9 bytes_invalid=0 send_seq=1154704 receive_seq=1154704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=19266 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120843 bytes_read=374110 bytes_retransmit=0 bytes_invalid=0 send_seq=20116 receive_seq=20116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998962 adj=49997980 sd_pos=3318544 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.35 cputime=5900.665 memavail=3263196 print_time=19753.870 buffer_time=2.805 print_stall=0 extruder: target=210 temp=208.9 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65719.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=60516120 bytes_read=9409334 bytes_retransmit=9 bytes_invalid=0 send_seq=1154902 receive_seq=1154902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=17211 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120849 bytes_read=374126 bytes_retransmit=0 bytes_invalid=0 send_seq=20117 receive_seq=20117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997973 sd_pos=3320369 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.35 cputime=5900.753 memavail=3263088 print_time=19754.658 buffer_time=2.592 print_stall=0 extruder: target=210 temp=208.8 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65720.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=60527133 bytes_read=9410470 bytes_retransmit=9 bytes_invalid=0 send_seq=1155086 receive_seq=1155086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=10815 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=120855 bytes_read=374142 bytes_retransmit=0 bytes_invalid=0 send_seq=20118 receive_seq=20118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997976 sd_pos=3321588 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.35 cputime=5900.832 memavail=3263088 print_time=19755.208 buffer_time=2.142 print_stall=0 extruder: target=210 temp=208.9 pwm=0.412
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65721.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60537949 bytes_read=9411588 bytes_retransmit=9 bytes_invalid=0 send_seq=1155266 receive_seq=1155266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=8344 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120861 bytes_read=374171 bytes_retransmit=0 bytes_invalid=0 send_seq=20119 receive_seq=20119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997982 sd_pos=3325298 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.35 cputime=5900.982 memavail=3263088 print_time=19756.472 buffer_time=2.405 print_stall=0 extruder: target=210 temp=209.1 pwm=0.412
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65722.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60547186 bytes_read=9412620 bytes_retransmit=9 bytes_invalid=0 send_seq=1155429 receive_seq=1155429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=13690 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120867 bytes_read=374187 bytes_retransmit=0 bytes_invalid=0 send_seq=20120 receive_seq=20120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998983 adj=49998002 sd_pos=3327739 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.35 cputime=5901.168 memavail=3263088 print_time=19757.846 buffer_time=2.778 print_stall=0 extruder: target=210 temp=209.4 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65723.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60554100 bytes_read=9413411 bytes_retransmit=9 bytes_invalid=0 send_seq=1155544 receive_seq=1155544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=21841 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120873 bytes_read=374202 bytes_retransmit=0 bytes_invalid=0 send_seq=20121 receive_seq=20121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998981 adj=49998128 sd_pos=3330043 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.40 cputime=5901.276 memavail=3263088 print_time=19759.246 buffer_time=3.178 print_stall=0 extruder: target=210 temp=210.0 pwm=0.274
Stats 65724.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60563243 bytes_read=9414419 bytes_retransmit=9 bytes_invalid=0 send_seq=1155706 receive_seq=1155706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=13655 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120879 bytes_read=374217 bytes_retransmit=0 bytes_invalid=0 send_seq=20122 receive_seq=20122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998979 adj=49998092 sd_pos=3330043 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.40 cputime=5901.320 memavail=3263088 print_time=19759.246 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.5 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65725.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60574446 bytes_read=9415575 bytes_retransmit=9 bytes_invalid=0 send_seq=1155894 receive_seq=1155894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=17425 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120885 bytes_read=374232 bytes_retransmit=0 bytes_invalid=0 send_seq=20123 receive_seq=20123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998979 adj=49998083 sd_pos=3332090 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.40 cputime=5901.438 memavail=3263088 print_time=19760.610 buffer_time=2.541 print_stall=0 extruder: target=210 temp=210.9 pwm=0.206
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65726.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60586103 bytes_read=9416822 bytes_retransmit=9 bytes_invalid=0 send_seq=1156097 receive_seq=1156097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=15655 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120891 bytes_read=374247 bytes_retransmit=0 bytes_invalid=0 send_seq=20124 receive_seq=20124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998079 sd_pos=3333764 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.40 cputime=5901.531 memavail=3264716 print_time=19761.498 buffer_time=2.428 print_stall=0 extruder: target=210 temp=211.1 pwm=0.206
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65727.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60597515 bytes_read=9418019 bytes_retransmit=9 bytes_invalid=0 send_seq=1156296 receive_seq=1156296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=8739 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120897 bytes_read=374275 bytes_retransmit=0 bytes_invalid=0 send_seq=20125 receive_seq=20125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998048 sd_pos=3333908 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.40 cputime=5901.728 memavail=3264860 print_time=19762.198 buffer_time=2.128 print_stall=0 extruder: target=210 temp=211.2 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65728.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60608500 bytes_read=9419191 bytes_retransmit=9 bytes_invalid=0 send_seq=1156487 receive_seq=1156487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2936 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120903 bytes_read=374291 bytes_retransmit=0 bytes_invalid=0 send_seq=20126 receive_seq=20126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998977 adj=49998035 sd_pos=3334301 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.37 cputime=5902.023 memavail=3263856 print_time=19763.372 buffer_time=2.301 print_stall=0 extruder: target=210 temp=211.1 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65729.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60615601 bytes_read=9420052 bytes_retransmit=9 bytes_invalid=0 send_seq=1156616 receive_seq=1156616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=479 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120909 bytes_read=374307 bytes_retransmit=0 bytes_invalid=0 send_seq=20127 receive_seq=20127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998029 sd_pos=3334476 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.37 cputime=5902.196 memavail=3262848 print_time=19764.246 buffer_time=2.174 print_stall=0 extruder: target=210 temp=210.8 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65730.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60619512 bytes_read=9420639 bytes_retransmit=9 bytes_invalid=0 send_seq=1156693 receive_seq=1156693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=707 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120915 bytes_read=374323 bytes_retransmit=0 bytes_invalid=0 send_seq=20128 receive_seq=20128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998973 adj=49998017 sd_pos=3334900 heater_bed: target=60 temp=60.0 pwm=0.283 sysload=0.37 cputime=5902.370 memavail=3262848 print_time=19765.229 buffer_time=2.157 print_stall=0 extruder: target=210 temp=210.5 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65731.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60624467 bytes_read=9421287 bytes_retransmit=9 bytes_invalid=0 send_seq=1156776 receive_seq=1156776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=4483 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=120921 bytes_read=374339 bytes_retransmit=0 bytes_invalid=0 send_seq=20129 receive_seq=20129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49997998 sd_pos=3339043 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.37 cputime=5902.447 memavail=3262848 print_time=19766.487 buffer_time=2.414 print_stall=0 extruder: target=210 temp=210.2 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65732.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60628638 bytes_read=9421858 bytes_retransmit=9 bytes_invalid=0 send_seq=1156847 receive_seq=1156847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=17230 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120927 bytes_read=374368 bytes_retransmit=0 bytes_invalid=0 send_seq=20130 receive_seq=20130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49997992 sd_pos=3342748 heater_bed: target=60 temp=60.0 pwm=0.260 sysload=0.37 cputime=5902.559 memavail=3262848 print_time=19768.263 buffer_time=3.190 print_stall=0 extruder: target=210 temp=209.7 pwm=0.397
Stats 65733.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60636724 bytes_read=9422780 bytes_retransmit=9 bytes_invalid=0 send_seq=1156991 receive_seq=1156991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10078 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120933 bytes_read=374384 bytes_retransmit=0 bytes_invalid=0 send_seq=20131 receive_seq=20131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997983 sd_pos=3342748 heater_bed: target=60 temp=60.0 pwm=0.274 sysload=0.34 cputime=5902.624 memavail=3262852 print_time=19768.263 buffer_time=2.189 print_stall=0 extruder: target=210 temp=209.4 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65734.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60644251 bytes_read=9423672 bytes_retransmit=9 bytes_invalid=0 send_seq=1157126 receive_seq=1157126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18183 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120939 bytes_read=374400 bytes_retransmit=0 bytes_invalid=0 send_seq=20132 receive_seq=20132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49997969 sd_pos=3345063 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.34 cputime=5902.762 memavail=3262852 print_time=19769.700 buffer_time=2.625 print_stall=0 extruder: target=210 temp=209.1 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65735.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60655514 bytes_read=9424868 bytes_retransmit=9 bytes_invalid=0 send_seq=1157323 receive_seq=1157323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=22221 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120945 bytes_read=374416 bytes_retransmit=0 bytes_invalid=0 send_seq=20133 receive_seq=20133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49997917 sd_pos=3347275 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.34 cputime=5902.880 memavail=3267724 print_time=19771.072 buffer_time=2.997 print_stall=0 extruder: target=210 temp=208.8 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65736.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60667637 bytes_read=9426141 bytes_retransmit=9 bytes_invalid=0 send_seq=1157534 receive_seq=1157534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=18587 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120951 bytes_read=374432 bytes_retransmit=0 bytes_invalid=0 send_seq=20134 receive_seq=20134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49997933 sd_pos=3348894 heater_bed: target=60 temp=60.0 pwm=0.230 sysload=0.34 cputime=5902.967 memavail=3267472 print_time=19771.762 buffer_time=2.654 print_stall=0 extruder: target=210 temp=208.7 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65737.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60679137 bytes_read=9427363 bytes_retransmit=9 bytes_invalid=0 send_seq=1157735 receive_seq=1157735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11718 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=120957 bytes_read=374461 bytes_retransmit=0 bytes_invalid=0 send_seq=20135 receive_seq=20135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997918 sd_pos=3350213 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.34 cputime=5903.038 memavail=3267232 print_time=19772.341 buffer_time=2.232 print_stall=0 extruder: target=210 temp=208.8 pwm=0.450
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65738.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60690213 bytes_read=9428549 bytes_retransmit=9 bytes_invalid=0 send_seq=1157929 receive_seq=1157929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=8964 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=120963 bytes_read=374477 bytes_retransmit=0 bytes_invalid=0 send_seq=20136 receive_seq=20136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997920 sd_pos=3354009 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.31 cputime=5903.128 memavail=3265724 print_time=19773.531 buffer_time=2.413 print_stall=0 extruder: target=210 temp=209.1 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65739.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60699891 bytes_read=9429596 bytes_retransmit=9 bytes_invalid=0 send_seq=1158098 receive_seq=1158098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=15342 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=120969 bytes_read=374493 bytes_retransmit=0 bytes_invalid=0 send_seq=20137 receive_seq=20137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49997937 sd_pos=3356506 heater_bed: target=60 temp=60.0 pwm=0.233 sysload=0.31 cputime=5903.270 memavail=3265728 print_time=19775.104 buffer_time=2.986 print_stall=0 extruder: target=210 temp=209.5 pwm=0.338
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65740.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60707166 bytes_read=9430478 bytes_retransmit=9 bytes_invalid=0 send_seq=1158231 receive_seq=1158231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=8873 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=120975 bytes_read=374509 bytes_retransmit=0 bytes_invalid=0 send_seq=20138 receive_seq=20138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49997952 sd_pos=3358711 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.31 cputime=5903.330 memavail=3265476 print_time=19775.104 buffer_time=1.978 print_stall=0 extruder: target=210 temp=210.0 pwm=0.268
Stats 65741.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60716052 bytes_read=9431470 bytes_retransmit=9 bytes_invalid=0 send_seq=1158383 receive_seq=1158383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=16188 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=120981 bytes_read=374525 bytes_retransmit=0 bytes_invalid=0 send_seq=20139 receive_seq=20139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997967 sd_pos=3358848 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.31 cputime=5903.402 memavail=3265236 print_time=19776.673 buffer_time=2.547 print_stall=0 extruder: target=210 temp=210.6 pwm=0.268
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65742.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60726995 bytes_read=9432617 bytes_retransmit=9 bytes_invalid=0 send_seq=1158572 receive_seq=1158572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=21996 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120987 bytes_read=374554 bytes_retransmit=0 bytes_invalid=0 send_seq=20140 receive_seq=20140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997979 sd_pos=3361752 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.31 cputime=5903.503 memavail=3265236 print_time=19778.244 buffer_time=3.117 print_stall=0 extruder: target=210 temp=210.9 pwm=0.213
Stats 65743.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60737698 bytes_read=9433794 bytes_retransmit=9 bytes_invalid=0 send_seq=1158760 receive_seq=1158759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=12405 freq=400007866 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=120999 bytes_read=374586 bytes_retransmit=0 bytes_invalid=0 send_seq=20142 receive_seq=20142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49997992 sd_pos=3361752 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.44 cputime=5903.551 memavail=3265236 print_time=19778.244 buffer_time=2.116 print_stall=0 extruder: target=210 temp=211.2 pwm=0.213
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65744.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60748589 bytes_read=9434926 bytes_retransmit=9 bytes_invalid=0 send_seq=1158945 receive_seq=1158945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16498 freq=400007875 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121005 bytes_read=374602 bytes_retransmit=0 bytes_invalid=0 send_seq=20143 receive_seq=20143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49997800 sd_pos=3364411 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.44 cputime=5903.665 memavail=3265236 print_time=19779.664 buffer_time=2.536 print_stall=0 extruder: target=210 temp=211.1 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65745.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60759834 bytes_read=9436102 bytes_retransmit=9 bytes_invalid=0 send_seq=1159140 receive_seq=1159140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=10542 freq=400007859 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121011 bytes_read=374618 bytes_retransmit=0 bytes_invalid=0 send_seq=20144 receive_seq=20144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997828 sd_pos=3364841 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.44 cputime=5903.870 memavail=3265240 print_time=19780.284 buffer_time=2.155 print_stall=0 extruder: target=210 temp=211.0 pwm=0.264
Stats 65746.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60770451 bytes_read=9437275 bytes_retransmit=9 bytes_invalid=0 send_seq=1159326 receive_seq=1159326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=4726 freq=400007872 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121017 bytes_read=374634 bytes_retransmit=0 bytes_invalid=0 send_seq=20145 receive_seq=20145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997834 sd_pos=3365039 heater_bed: target=60 temp=60.0 pwm=0.247 sysload=0.44 cputime=5904.111 memavail=3264988 print_time=19781.331 buffer_time=2.201 print_stall=0 extruder: target=210 temp=210.6 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65747.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60779845 bytes_read=9438287 bytes_retransmit=9 bytes_invalid=0 send_seq=1159488 receive_seq=1159488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=945 freq=400007873 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121023 bytes_read=374663 bytes_retransmit=0 bytes_invalid=0 send_seq=20146 receive_seq=20146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997835 sd_pos=3365529 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.44 cputime=5904.286 memavail=3264988 print_time=19782.344 buffer_time=2.213 print_stall=0 extruder: target=210 temp=210.3 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65748.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60783837 bytes_read=9438824 bytes_retransmit=9 bytes_invalid=0 send_seq=1159555 receive_seq=1159555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1351 freq=400007853 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121029 bytes_read=374679 bytes_retransmit=0 bytes_invalid=0 send_seq=20147 receive_seq=20147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997847 sd_pos=3365831 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.41 cputime=5904.498 memavail=3264992 print_time=19783.531 buffer_time=2.394 print_stall=0 extruder: target=210 temp=210.1 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65749.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60789077 bytes_read=9439545 bytes_retransmit=9 bytes_invalid=0 send_seq=1159653 receive_seq=1159653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2779 freq=400007877 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121035 bytes_read=374695 bytes_retransmit=0 bytes_invalid=0 send_seq=20148 receive_seq=20148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997919 sd_pos=3368701 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.41 cputime=5904.571 memavail=3264528 print_time=19784.412 buffer_time=2.275 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65750.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60792844 bytes_read=9440112 bytes_retransmit=9 bytes_invalid=0 send_seq=1159726 receive_seq=1159726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=4554 freq=400007874 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121041 bytes_read=374711 bytes_retransmit=0 bytes_invalid=0 send_seq=20149 receive_seq=20149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49997903 sd_pos=3371049 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.41 cputime=5904.627 memavail=3264528 print_time=19785.358 buffer_time=2.220 print_stall=0 extruder: target=210 temp=209.5 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65751.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60799552 bytes_read=9440945 bytes_retransmit=9 bytes_invalid=0 send_seq=1159849 receive_seq=1159849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=12513 freq=400007856 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121047 bytes_read=374727 bytes_retransmit=0 bytes_invalid=0 send_seq=20150 receive_seq=20150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998970 adj=49997959 sd_pos=3373312 heater_bed: target=60 temp=60.0 pwm=0.215 sysload=0.41 cputime=5904.751 memavail=3264532 print_time=19786.855 buffer_time=2.717 print_stall=0 extruder: target=210 temp=209.3 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65752.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60806200 bytes_read=9441741 bytes_retransmit=9 bytes_invalid=0 send_seq=1159962 receive_seq=1159962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=21074 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121053 bytes_read=374756 bytes_retransmit=0 bytes_invalid=0 send_seq=20151 receive_seq=20151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49997985 sd_pos=3375841 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.41 cputime=5904.838 memavail=3264532 print_time=19788.387 buffer_time=3.247 print_stall=0 extruder: target=210 temp=209.2 pwm=0.432
Stats 65753.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60815732 bytes_read=9442788 bytes_retransmit=9 bytes_invalid=0 send_seq=1160131 receive_seq=1160131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=12519 freq=400007841 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121059 bytes_read=374772 bytes_retransmit=0 bytes_invalid=0 send_seq=20152 receive_seq=20152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49997990 sd_pos=3375841 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.38 cputime=5904.882 memavail=3264536 print_time=19788.387 buffer_time=2.247 print_stall=0 extruder: target=210 temp=209.1 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65754.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60826163 bytes_read=9443910 bytes_retransmit=9 bytes_invalid=0 send_seq=1160315 receive_seq=1160315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16908 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121065 bytes_read=374788 bytes_retransmit=0 bytes_invalid=0 send_seq=20153 receive_seq=20153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49998025 sd_pos=3378718 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.38 cputime=5904.976 memavail=3264536 print_time=19789.817 buffer_time=2.676 print_stall=0 extruder: target=210 temp=209.0 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65755.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=60836780 bytes_read=9445056 bytes_retransmit=9 bytes_invalid=0 send_seq=1160498 receive_seq=1160498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=23381 freq=400007813 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121071 bytes_read=374804 bytes_retransmit=0 bytes_invalid=0 send_seq=20154 receive_seq=20154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49998042 sd_pos=3381450 heater_bed: target=60 temp=60.0 pwm=0.251 sysload=0.38 cputime=5905.078 memavail=3264536 print_time=19791.503 buffer_time=3.361 print_stall=0 extruder: target=210 temp=209.1 pwm=0.432
Stats 65756.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60847438 bytes_read=9446204 bytes_retransmit=9 bytes_invalid=0 send_seq=1160685 receive_seq=1160685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=13820 freq=400007801 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121077 bytes_read=374820 bytes_retransmit=0 bytes_invalid=0 send_seq=20155 receive_seq=20155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49998021 sd_pos=3381450 heater_bed: target=60 temp=60.0 pwm=0.067 sysload=0.38 cputime=5905.155 memavail=3264536 print_time=19791.503 buffer_time=2.361 print_stall=0 extruder: target=210 temp=209.2 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65757.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60857789 bytes_read=9447315 bytes_retransmit=9 bytes_invalid=0 send_seq=1160867 receive_seq=1160867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=10110 freq=400007865 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121083 bytes_read=374849 bytes_retransmit=0 bytes_invalid=0 send_seq=20156 receive_seq=20156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998067 sd_pos=3383502 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.38 cputime=5905.293 memavail=3264540 print_time=19792.239 buffer_time=2.095 print_stall=0 extruder: target=210 temp=209.5 pwm=0.356
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65758.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60868373 bytes_read=9448426 bytes_retransmit=9 bytes_invalid=0 send_seq=1161043 receive_seq=1161043 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=10707 freq=400007929 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121089 bytes_read=374865 bytes_retransmit=0 bytes_invalid=0 send_seq=20157 receive_seq=20157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998011 sd_pos=3387260 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.35 cputime=5905.482 memavail=3264540 print_time=19793.793 buffer_time=2.649 print_stall=0 extruder: target=210 temp=210.0 pwm=0.296
Stats 65759.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60877503 bytes_read=9449433 bytes_retransmit=9 bytes_invalid=0 send_seq=1161204 receive_seq=1161204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=16010 freq=400008001 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121095 bytes_read=374881 bytes_retransmit=0 bytes_invalid=0 send_seq=20158 receive_seq=20158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998977 adj=49997923 sd_pos=3388832 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.35 cputime=5905.687 memavail=3264540 print_time=19794.932 buffer_time=2.788 print_stall=0 extruder: target=210 temp=210.2 pwm=0.296
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65760.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60884064 bytes_read=9450185 bytes_retransmit=9 bytes_invalid=0 send_seq=1161314 receive_seq=1161314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=24684 freq=400007978 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121101 bytes_read=374897 bytes_retransmit=0 bytes_invalid=0 send_seq=20159 receive_seq=20159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49997860 sd_pos=3390731 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.35 cputime=5905.800 memavail=3264540 print_time=19796.154 buffer_time=3.009 print_stall=0 extruder: target=210 temp=210.6 pwm=0.296
Stats 65761.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60894967 bytes_read=9451387 bytes_retransmit=9 bytes_invalid=0 send_seq=1161505 receive_seq=1161505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=14936 freq=400007953 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121107 bytes_read=374913 bytes_retransmit=0 bytes_invalid=0 send_seq=20160 receive_seq=20160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998973 adj=49997893 sd_pos=3390731 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.35 cputime=5905.849 memavail=3264540 print_time=19796.154 buffer_time=2.008 print_stall=0 extruder: target=210 temp=210.9 pwm=0.296
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65762.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60908226 bytes_read=9452729 bytes_retransmit=9 bytes_invalid=0 send_seq=1161733 receive_seq=1161733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15770 freq=400007930 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=121113 bytes_read=374942 bytes_retransmit=0 bytes_invalid=0 send_seq=20161 receive_seq=20161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49997909 sd_pos=3393515 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.35 cputime=5905.964 memavail=3264540 print_time=19797.312 buffer_time=2.165 print_stall=0 extruder: target=210 temp=211.0 pwm=0.234
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65763.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60921154 bytes_read=9454021 bytes_retransmit=9 bytes_invalid=0 send_seq=1161948 receive_seq=1161948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=9057 freq=400007903 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=121119 bytes_read=374958 bytes_retransmit=0 bytes_invalid=0 send_seq=20162 receive_seq=20162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49997914 sd_pos=3393807 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.32 cputime=5906.131 memavail=3264548 print_time=19798.171 buffer_time=2.023 print_stall=0 extruder: target=210 temp=211.0 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65764.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60932933 bytes_read=9455262 bytes_retransmit=9 bytes_invalid=0 send_seq=1162153 receive_seq=1162153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3216 freq=400007876 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=121125 bytes_read=374974 bytes_retransmit=0 bytes_invalid=0 send_seq=20163 receive_seq=20163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997933 sd_pos=3394323 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.32 cputime=5906.390 memavail=3264548 print_time=19799.381 buffer_time=2.232 print_stall=0 extruder: target=210 temp=210.8 pwm=0.291
Stats 65765.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60939862 bytes_read=9456084 bytes_retransmit=9 bytes_invalid=0 send_seq=1162277 receive_seq=1162277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=634 freq=400007851 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=121131 bytes_read=374990 bytes_retransmit=0 bytes_invalid=0 send_seq=20164 receive_seq=20164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49997961 sd_pos=3394498 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.32 cputime=5906.600 memavail=3264548 print_time=19800.360 buffer_time=2.169 print_stall=0 extruder: target=210 temp=210.7 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65766.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60944511 bytes_read=9456762 bytes_retransmit=9 bytes_invalid=0 send_seq=1162366 receive_seq=1162366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2317 freq=400007830 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=121137 bytes_read=375006 bytes_retransmit=0 bytes_invalid=0 send_seq=20165 receive_seq=20165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49997988 sd_pos=3396001 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.32 cputime=5906.743 memavail=3265304 print_time=19801.526 buffer_time=2.335 print_stall=0 extruder: target=210 temp=210.4 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65767.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60949072 bytes_read=9457407 bytes_retransmit=9 bytes_invalid=0 send_seq=1162453 receive_seq=1162453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=3320 freq=400007810 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121143 bytes_read=375035 bytes_retransmit=0 bytes_invalid=0 send_seq=20166 receive_seq=20166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998008 sd_pos=3398424 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.32 cputime=5906.800 memavail=3265560 print_time=19802.291 buffer_time=2.100 print_stall=0 extruder: target=210 temp=210.1 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65768.8: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60954254 bytes_read=9458089 bytes_retransmit=9 bytes_invalid=0 send_seq=1162549 receive_seq=1162549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=16848 freq=400007792 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121149 bytes_read=375051 bytes_retransmit=0 bytes_invalid=0 send_seq=20167 receive_seq=20167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998089 sd_pos=3402258 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.29 cputime=5906.933 memavail=3269012 print_time=19804.143 buffer_time=2.950 print_stall=0 extruder: target=210 temp=209.8 pwm=0.400
Stats 65769.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60962070 bytes_read=9458970 bytes_retransmit=9 bytes_invalid=0 send_seq=1162679 receive_seq=1162679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=23283 freq=400007775 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121155 bytes_read=375067 bytes_retransmit=0 bytes_invalid=0 send_seq=20168 receive_seq=20168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998046 sd_pos=3403820 heater_bed: target=60 temp=60.0 pwm=0.347 sysload=0.29 cputime=5907.095 memavail=3268100 print_time=19805.265 buffer_time=3.003 print_stall=0 extruder: target=210 temp=209.3 pwm=0.462
Stats 65770.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60971370 bytes_read=9459997 bytes_retransmit=9 bytes_invalid=0 send_seq=1162844 receive_seq=1162844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14966 freq=400007797 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121161 bytes_read=375083 bytes_retransmit=0 bytes_invalid=0 send_seq=20169 receive_seq=20169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998045 sd_pos=3403820 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.29 cputime=5907.137 memavail=3268100 print_time=19805.265 buffer_time=2.003 print_stall=0 extruder: target=210 temp=209.1 pwm=0.462
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65771.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60984618 bytes_read=9461375 bytes_retransmit=9 bytes_invalid=0 send_seq=1163073 receive_seq=1163073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=17827 freq=400007784 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121167 bytes_read=375099 bytes_retransmit=0 bytes_invalid=0 send_seq=20170 receive_seq=20170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998006 sd_pos=3406547 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.29 cputime=5907.258 memavail=3268100 print_time=19806.566 buffer_time=2.304 print_stall=0 extruder: target=210 temp=208.9 pwm=0.462
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65772.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=60997765 bytes_read=9462731 bytes_retransmit=9 bytes_invalid=0 send_seq=1163301 receive_seq=1163301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=11080 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121173 bytes_read=375128 bytes_retransmit=0 bytes_invalid=0 send_seq=20171 receive_seq=20171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998040 sd_pos=3408705 heater_bed: target=60 temp=60.0 pwm=0.219 sysload=0.29 cputime=5907.338 memavail=3268100 print_time=19807.325 buffer_time=2.062 print_stall=0 extruder: target=210 temp=208.8 pwm=0.462
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65773.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61010076 bytes_read=9464003 bytes_retransmit=9 bytes_invalid=0 send_seq=1163515 receive_seq=1163515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=11702 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121179 bytes_read=375144 bytes_retransmit=0 bytes_invalid=0 send_seq=20172 receive_seq=20172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998051 sd_pos=3412742 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.27 cputime=5907.442 memavail=3268100 print_time=19808.925 buffer_time=2.661 print_stall=0 extruder: target=210 temp=208.8 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65774.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61018994 bytes_read=9465015 bytes_retransmit=9 bytes_invalid=0 send_seq=1163674 receive_seq=1163674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=17477 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121185 bytes_read=375160 bytes_retransmit=0 bytes_invalid=0 send_seq=20173 receive_seq=20173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998050 sd_pos=3414676 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.27 cputime=5907.554 memavail=3267852 print_time=19810.231 buffer_time=2.965 print_stall=0 extruder: target=210 temp=209.1 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65775.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61026148 bytes_read=9465871 bytes_retransmit=9 bytes_invalid=0 send_seq=1163802 receive_seq=1163802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=22054 freq=400007738 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121191 bytes_read=375176 bytes_retransmit=0 bytes_invalid=0 send_seq=20174 receive_seq=20174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49998061 sd_pos=3416943 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.27 cputime=5907.734 memavail=3267852 print_time=19811.323 buffer_time=2.988 print_stall=0 extruder: target=210 temp=209.5 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65777.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61038368 bytes_read=9467169 bytes_retransmit=9 bytes_invalid=0 send_seq=1164015 receive_seq=1164015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=25265 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121197 bytes_read=375192 bytes_retransmit=0 bytes_invalid=0 send_seq=20175 receive_seq=20175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998132 sd_pos=3419648 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.27 cputime=5907.863 memavail=3267852 print_time=19812.622 buffer_time=3.226 print_stall=0 extruder: target=210 temp=209.9 pwm=0.339
Stats 65778.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61050191 bytes_read=9468397 bytes_retransmit=9 bytes_invalid=0 send_seq=1164218 receive_seq=1164218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=14640 freq=400007778 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121203 bytes_read=375221 bytes_retransmit=0 bytes_invalid=0 send_seq=20176 receive_seq=20176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998979 adj=49998114 sd_pos=3419648 heater_bed: target=60 temp=60.0 pwm=0.215 sysload=0.27 cputime=5907.912 memavail=3267852 print_time=19812.622 buffer_time=2.226 print_stall=0 extruder: target=210 temp=210.4 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65779.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61061295 bytes_read=9469561 bytes_retransmit=9 bytes_invalid=0 send_seq=1164411 receive_seq=1164411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9725 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121209 bytes_read=375237 bytes_retransmit=0 bytes_invalid=0 send_seq=20177 receive_seq=20177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998980 adj=49998090 sd_pos=3420174 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.33 cputime=5908.084 memavail=3267364 print_time=19813.527 buffer_time=2.130 print_stall=0 extruder: target=210 temp=210.7 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65780.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61073192 bytes_read=9470813 bytes_retransmit=9 bytes_invalid=0 send_seq=1164618 receive_seq=1164618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=3681 freq=400007757 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121215 bytes_read=375253 bytes_retransmit=0 bytes_invalid=0 send_seq=20178 receive_seq=20178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998978 adj=49998108 sd_pos=3420647 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.33 cputime=5908.307 memavail=3266368 print_time=19814.707 buffer_time=2.309 print_stall=0 extruder: target=210 temp=210.9 pwm=0.278
Stats 65781.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61080298 bytes_read=9471624 bytes_retransmit=9 bytes_invalid=0 send_seq=1164737 receive_seq=1164737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=504 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121221 bytes_read=375269 bytes_retransmit=0 bytes_invalid=0 send_seq=20179 receive_seq=20179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998110 sd_pos=3420693 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.33 cputime=5908.474 memavail=3265360 print_time=19815.500 buffer_time=2.102 print_stall=0 extruder: target=210 temp=211.0 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65782.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61084070 bytes_read=9472202 bytes_retransmit=9 bytes_invalid=0 send_seq=1164809 receive_seq=1164809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1618 freq=400007733 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=121227 bytes_read=375285 bytes_retransmit=0 bytes_invalid=0 send_seq=20180 receive_seq=20180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998106 sd_pos=3421218 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.33 cputime=5908.681 memavail=3265120 print_time=19816.511 buffer_time=2.112 print_stall=0 extruder: target=210 temp=211.0 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65783.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61089503 bytes_read=9472919 bytes_retransmit=9 bytes_invalid=0 send_seq=1164909 receive_seq=1164909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=3036 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=121233 bytes_read=375314 bytes_retransmit=0 bytes_invalid=0 send_seq=20181 receive_seq=20181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49998074 sd_pos=3424963 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.33 cputime=5908.749 memavail=3265124 print_time=19817.483 buffer_time=2.083 print_stall=0 extruder: target=210 temp=210.8 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65784.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61094800 bytes_read=9473615 bytes_retransmit=9 bytes_invalid=0 send_seq=1165005 receive_seq=1165005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=18226 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=121239 bytes_read=375330 bytes_retransmit=0 bytes_invalid=0 send_seq=20182 receive_seq=20182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998970 adj=49998055 sd_pos=3429454 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.30 cputime=5908.886 memavail=3265864 print_time=19819.703 buffer_time=3.258 print_stall=0 extruder: target=210 temp=210.6 pwm=0.349
Stats 65785.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61102145 bytes_read=9474472 bytes_retransmit=9 bytes_invalid=0 send_seq=1165136 receive_seq=1165136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=11676 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=121245 bytes_read=375346 bytes_retransmit=0 bytes_invalid=0 send_seq=20183 receive_seq=20183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998013 sd_pos=3429454 heater_bed: target=60 temp=60.0 pwm=0.038 sysload=0.30 cputime=5908.925 memavail=3269732 print_time=19819.703 buffer_time=2.258 print_stall=0 extruder: target=210 temp=210.2 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65786.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61109894 bytes_read=9475358 bytes_retransmit=9 bytes_invalid=0 send_seq=1165267 receive_seq=1165267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=18454 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=121251 bytes_read=375362 bytes_retransmit=0 bytes_invalid=0 send_seq=20184 receive_seq=20184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49997988 sd_pos=3431655 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.30 cputime=5909.033 memavail=3269480 print_time=19820.998 buffer_time=2.552 print_stall=0 extruder: target=210 temp=209.6 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65787.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=61121768 bytes_read=9476561 bytes_retransmit=9 bytes_invalid=0 send_seq=1165464 receive_seq=1165464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=21067 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=121257 bytes_read=375378 bytes_retransmit=0 bytes_invalid=0 send_seq=20185 receive_seq=20185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998008 sd_pos=3434498 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.30 cputime=5909.194 memavail=3269480 print_time=19822.218 buffer_time=2.771 print_stall=0 extruder: target=210 temp=209.3 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65788.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=61133620 bytes_read=9477808 bytes_retransmit=9 bytes_invalid=0 send_seq=1165670 receive_seq=1165670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=13307 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121263 bytes_read=375407 bytes_retransmit=0 bytes_invalid=0 send_seq=20186 receive_seq=20186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998005 sd_pos=3435280 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.30 cputime=5909.261 memavail=3269228 print_time=19822.678 buffer_time=2.230 print_stall=0 extruder: target=210 temp=209.0 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65789.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=61145549 bytes_read=9479064 bytes_retransmit=9 bytes_invalid=0 send_seq=1165879 receive_seq=1165879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=9278 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121269 bytes_read=375423 bytes_retransmit=0 bytes_invalid=0 send_seq=20187 receive_seq=20187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49997973 sd_pos=3439160 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.28 cputime=5909.347 memavail=3268252 print_time=19823.749 buffer_time=2.301 print_stall=0 extruder: target=210 temp=208.8 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65790.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=61155882 bytes_read=9480170 bytes_retransmit=9 bytes_invalid=0 send_seq=1166060 receive_seq=1166060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=8391 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121275 bytes_read=375439 bytes_retransmit=0 bytes_invalid=0 send_seq=20188 receive_seq=20188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998001 sd_pos=3441212 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.28 cputime=5909.430 memavail=3268252 print_time=19824.719 buffer_time=2.270 print_stall=0 extruder: target=210 temp=208.9 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65791.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=61163486 bytes_read=9481088 bytes_retransmit=9 bytes_invalid=0 send_seq=1166198 receive_seq=1166198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=16414 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121287 bytes_read=375471 bytes_retransmit=0 bytes_invalid=0 send_seq=20190 receive_seq=20190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998008 sd_pos=3443814 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.28 cputime=5909.530 memavail=3268252 print_time=19826.155 buffer_time=2.706 print_stall=0 extruder: target=210 temp=209.1 pwm=0.439
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65792.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61171895 bytes_read=9482075 bytes_retransmit=9 bytes_invalid=0 send_seq=1166349 receive_seq=1166349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=24004 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121293 bytes_read=375487 bytes_retransmit=0 bytes_invalid=0 send_seq=20191 receive_seq=20191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998100 sd_pos=3446281 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.28 cputime=5909.678 memavail=3266992 print_time=19827.651 buffer_time=3.201 print_stall=0 extruder: target=210 temp=209.6 pwm=0.380
Stats 65793.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61183442 bytes_read=9483282 bytes_retransmit=9 bytes_invalid=0 send_seq=1166550 receive_seq=1166550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=13631 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121299 bytes_read=375516 bytes_retransmit=0 bytes_invalid=0 send_seq=20192 receive_seq=20192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998075 sd_pos=3446281 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.28 cputime=5909.726 memavail=3266996 print_time=19827.651 buffer_time=2.200 print_stall=0 extruder: target=210 temp=209.9 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65794.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61194854 bytes_read=9484499 bytes_retransmit=9 bytes_invalid=0 send_seq=1166750 receive_seq=1166750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=19096 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121305 bytes_read=375532 bytes_retransmit=0 bytes_invalid=0 send_seq=20193 receive_seq=20193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998091 sd_pos=3448886 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.25 cputime=5909.839 memavail=3266996 print_time=19829.177 buffer_time=2.726 print_stall=0 extruder: target=210 temp=210.4 pwm=0.250
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65795.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61206161 bytes_read=9485700 bytes_retransmit=9 bytes_invalid=0 send_seq=1166947 receive_seq=1166947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16781 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121311 bytes_read=375548 bytes_retransmit=0 bytes_invalid=0 send_seq=20194 receive_seq=20194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998103 sd_pos=3450660 heater_bed: target=60 temp=60.0 pwm=0.054 sysload=0.25 cputime=5909.926 memavail=3267144 print_time=19829.955 buffer_time=2.503 print_stall=0 extruder: target=210 temp=210.9 pwm=0.250
Stats 65796.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61217430 bytes_read=9486892 bytes_retransmit=9 bytes_invalid=0 send_seq=1167145 receive_seq=1167145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=8956 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121317 bytes_read=375564 bytes_retransmit=0 bytes_invalid=0 send_seq=20195 receive_seq=20195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998104 sd_pos=3450703 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.25 cputime=5910.058 memavail=3267244 print_time=19830.454 buffer_time=2.002 print_stall=0 extruder: target=210 temp=211.1 pwm=0.250
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65797.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61228787 bytes_read=9488100 bytes_retransmit=9 bytes_invalid=0 send_seq=1167340 receive_seq=1167340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=3391 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121323 bytes_read=375580 bytes_retransmit=0 bytes_invalid=0 send_seq=20196 receive_seq=20196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49998110 sd_pos=3451277 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.25 cputime=5910.322 memavail=3267244 print_time=19831.699 buffer_time=2.246 print_stall=0 extruder: target=210 temp=211.3 pwm=0.250
Stats 65798.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61236152 bytes_read=9488976 bytes_retransmit=9 bytes_invalid=0 send_seq=1167472 receive_seq=1167472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1261 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121329 bytes_read=375609 bytes_retransmit=0 bytes_invalid=0 send_seq=20197 receive_seq=20197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998973 adj=49998028 sd_pos=3451494 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.25 cputime=5910.596 memavail=3267244 print_time=19832.736 buffer_time=2.282 print_stall=0 extruder: target=210 temp=211.1 pwm=0.262
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65799.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61240244 bytes_read=9489578 bytes_retransmit=9 bytes_invalid=0 send_seq=1167552 receive_seq=1167552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=4049 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121335 bytes_read=375625 bytes_retransmit=0 bytes_invalid=0 send_seq=20198 receive_seq=20198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998975 adj=49998073 sd_pos=3453361 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.23 cputime=5910.739 memavail=3266764 print_time=19833.982 buffer_time=2.528 print_stall=0 extruder: target=210 temp=211.1 pwm=0.262
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65800.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61245413 bytes_read=9490270 bytes_retransmit=9 bytes_invalid=0 send_seq=1167648 receive_seq=1167648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4173 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121341 bytes_read=375641 bytes_retransmit=0 bytes_invalid=0 send_seq=20199 receive_seq=20199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998104 sd_pos=3455839 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.23 cputime=5910.798 memavail=3266764 print_time=19834.743 buffer_time=2.289 print_stall=0 extruder: target=210 temp=210.8 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65801.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61250538 bytes_read=9490961 bytes_retransmit=9 bytes_invalid=0 send_seq=1167743 receive_seq=1167743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=18114 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121347 bytes_read=375657 bytes_retransmit=0 bytes_invalid=0 send_seq=20200 receive_seq=20200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998972 adj=49998089 sd_pos=3460276 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.23 cputime=5910.912 memavail=3266764 print_time=19836.764 buffer_time=3.310 print_stall=0 extruder: target=210 temp=210.4 pwm=0.394
Stats 65802.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61257946 bytes_read=9491844 bytes_retransmit=9 bytes_invalid=0 send_seq=1167876 receive_seq=1167876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=11521 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121353 bytes_read=375673 bytes_retransmit=0 bytes_invalid=0 send_seq=20201 receive_seq=20201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998971 adj=49998046 sd_pos=3460276 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.23 cputime=5910.951 memavail=3266764 print_time=19836.764 buffer_time=2.309 print_stall=0 extruder: target=210 temp=209.9 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65803.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61265921 bytes_read=9492776 bytes_retransmit=9 bytes_invalid=0 send_seq=1168019 receive_seq=1168019 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=19949 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=121359 bytes_read=375702 bytes_retransmit=0 bytes_invalid=0 send_seq=20202 receive_seq=20202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998970 adj=49998036 sd_pos=3462803 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.23 cputime=5911.106 memavail=3266764 print_time=19838.284 buffer_time=2.828 print_stall=0 extruder: target=210 temp=209.5 pwm=0.471
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65804.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61276943 bytes_read=9493902 bytes_retransmit=9 bytes_invalid=0 send_seq=1168201 receive_seq=1168201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=25202 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=121365 bytes_read=375718 bytes_retransmit=0 bytes_invalid=0 send_seq=20203 receive_seq=20203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998040 sd_pos=3465314 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.21 cputime=5911.213 memavail=3266764 print_time=19839.788 buffer_time=3.331 print_stall=0 extruder: target=210 temp=208.9 pwm=0.471
Stats 65805.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61288520 bytes_read=9495114 bytes_retransmit=9 bytes_invalid=0 send_seq=1168403 receive_seq=1168403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=14761 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=121371 bytes_read=375734 bytes_retransmit=0 bytes_invalid=0 send_seq=20204 receive_seq=20204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998968 adj=49998025 sd_pos=3465314 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.21 cputime=5911.262 memavail=3266764 print_time=19839.788 buffer_time=2.330 print_stall=0 extruder: target=210 temp=208.6 pwm=0.530
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65806.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61299779 bytes_read=9496316 bytes_retransmit=9 bytes_invalid=0 send_seq=1168600 receive_seq=1168600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=14687 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=121377 bytes_read=375750 bytes_retransmit=0 bytes_invalid=0 send_seq=20205 receive_seq=20205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998019 sd_pos=3467870 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.21 cputime=5911.352 memavail=3266512 print_time=19840.759 buffer_time=2.300 print_stall=0 extruder: target=210 temp=208.6 pwm=0.530
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65807.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61311122 bytes_read=9497543 bytes_retransmit=9 bytes_invalid=0 send_seq=1168799 receive_seq=1168799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=10051 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=121383 bytes_read=375766 bytes_retransmit=0 bytes_invalid=0 send_seq=20206 receive_seq=20206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998027 sd_pos=3470407 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.21 cputime=5911.446 memavail=3266512 print_time=19841.627 buffer_time=2.168 print_stall=0 extruder: target=210 temp=208.8 pwm=0.480
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65808.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61322175 bytes_read=9498720 bytes_retransmit=9 bytes_invalid=0 send_seq=1168994 receive_seq=1168994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9534 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121389 bytes_read=375795 bytes_retransmit=0 bytes_invalid=0 send_seq=20207 receive_seq=20207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998027 sd_pos=3473301 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.21 cputime=5911.675 memavail=3265756 print_time=19843.001 buffer_time=2.540 print_stall=0 extruder: target=210 temp=209.1 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65809.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61330441 bytes_read=9499677 bytes_retransmit=9 bytes_invalid=0 send_seq=1169142 receive_seq=1169142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=16535 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121395 bytes_read=375810 bytes_retransmit=0 bytes_invalid=0 send_seq=20208 receive_seq=20208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998966 adj=49998042 sd_pos=3475300 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.20 cputime=5911.789 memavail=3265272 print_time=19844.383 buffer_time=2.922 print_stall=0 extruder: target=210 temp=209.7 pwm=0.293
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65810.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61336757 bytes_read=9500446 bytes_retransmit=9 bytes_invalid=0 send_seq=1169253 receive_seq=1169253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=25539 freq=400007561 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121401 bytes_read=375825 bytes_retransmit=0 bytes_invalid=0 send_seq=20209 receive_seq=20209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998965 adj=49998036 sd_pos=3477640 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.20 cputime=5911.897 memavail=3265272 print_time=19845.795 buffer_time=3.334 print_stall=0 extruder: target=210 temp=210.3 pwm=0.230
Stats 65811.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61348089 bytes_read=9501639 bytes_retransmit=9 bytes_invalid=0 send_seq=1169452 receive_seq=1169452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=15355 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121407 bytes_read=375840 bytes_retransmit=0 bytes_invalid=0 send_seq=20210 receive_seq=20210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998040 sd_pos=3477640 heater_bed: target=60 temp=60.0 pwm=0.285 sysload=0.20 cputime=5911.946 memavail=3265272 print_time=19845.795 buffer_time=2.333 print_stall=0 extruder: target=210 temp=210.8 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65812.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61359602 bytes_read=9502877 bytes_retransmit=9 bytes_invalid=0 send_seq=1169653 receive_seq=1169653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=19251 freq=400007574 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121413 bytes_read=375855 bytes_retransmit=0 bytes_invalid=0 send_seq=20211 receive_seq=20211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998026 sd_pos=3480032 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.20 cputime=5912.076 memavail=3265272 print_time=19847.172 buffer_time=2.709 print_stall=0 extruder: target=210 temp=211.1 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65813.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61372271 bytes_read=9504198 bytes_retransmit=9 bytes_invalid=0 send_seq=1169874 receive_seq=1169874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=12973 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121419 bytes_read=375883 bytes_retransmit=0 bytes_invalid=0 send_seq=20212 receive_seq=20212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998964 adj=49998011 sd_pos=3481348 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.20 cputime=5912.274 memavail=3265272 print_time=19847.887 buffer_time=2.321 print_stall=0 extruder: target=210 temp=211.4 pwm=0.230
Stats 65814.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61383613 bytes_read=9505410 bytes_retransmit=9 bytes_invalid=0 send_seq=1170073 receive_seq=1170073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=5279 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121425 bytes_read=375899 bytes_retransmit=0 bytes_invalid=0 send_seq=20213 receive_seq=20213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998969 adj=49998009 sd_pos=3481486 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.18 cputime=5912.472 memavail=3264768 print_time=19848.655 buffer_time=2.089 print_stall=0 extruder: target=210 temp=211.4 pwm=0.230
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65815.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61394090 bytes_read=9506541 bytes_retransmit=9 bytes_invalid=0 send_seq=1170256 receive_seq=1170256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=770 freq=400007582 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121431 bytes_read=375915 bytes_retransmit=0 bytes_invalid=0 send_seq=20214 receive_seq=20214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998976 adj=49998069 sd_pos=3481846 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.18 cputime=5912.647 memavail=3264768 print_time=19849.655 buffer_time=2.089 print_stall=0 extruder: target=210 temp=211.2 pwm=0.260
Stats 65816.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61398005 bytes_read=9507118 bytes_retransmit=9 bytes_invalid=0 send_seq=1170331 receive_seq=1170331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1143 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121437 bytes_read=375931 bytes_retransmit=0 bytes_invalid=0 send_seq=20215 receive_seq=20215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998987 adj=49998147 sd_pos=3482095 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.18 cputime=5912.861 memavail=3265028 print_time=19850.708 buffer_time=2.141 print_stall=0 extruder: target=210 temp=210.8 pwm=0.322
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65817.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61403677 bytes_read=9507881 bytes_retransmit=9 bytes_invalid=0 send_seq=1170437 receive_seq=1170437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=3451 freq=400007565 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121443 bytes_read=375947 bytes_retransmit=0 bytes_invalid=0 send_seq=20216 receive_seq=20216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999001 adj=49998256 sd_pos=3485042 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.18 cputime=5912.981 memavail=3267936 print_time=19851.881 buffer_time=2.313 print_stall=0 extruder: target=210 temp=210.5 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65818.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61407950 bytes_read=9508507 bytes_retransmit=9 bytes_invalid=0 send_seq=1170519 receive_seq=1170519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=10309 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121449 bytes_read=375976 bytes_retransmit=0 bytes_invalid=0 send_seq=20217 receive_seq=20217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999019 adj=49998381 sd_pos=3488407 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.18 cputime=5913.132 memavail=3267940 print_time=19853.334 buffer_time=2.766 print_stall=0 extruder: target=210 temp=210.0 pwm=0.395
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65819.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61414311 bytes_read=9509294 bytes_retransmit=9 bytes_invalid=0 send_seq=1170636 receive_seq=1170636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=18781 freq=400007569 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121455 bytes_read=375992 bytes_retransmit=0 bytes_invalid=0 send_seq=20218 receive_seq=20218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49998426 sd_pos=3490521 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.17 cputime=5913.288 memavail=3266464 print_time=19854.694 buffer_time=3.126 print_stall=0 extruder: target=210 temp=209.6 pwm=0.449
Stats 65820.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61420739 bytes_read=9510101 bytes_retransmit=9 bytes_invalid=0 send_seq=1170754 receive_seq=1170754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=13114 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121461 bytes_read=376008 bytes_retransmit=0 bytes_invalid=0 send_seq=20219 receive_seq=20219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999069 adj=49998564 sd_pos=3490521 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.17 cputime=5913.327 memavail=3266464 print_time=19854.694 buffer_time=2.125 print_stall=0 extruder: target=210 temp=209.2 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65821.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61432061 bytes_read=9511303 bytes_retransmit=9 bytes_invalid=0 send_seq=1170952 receive_seq=1170952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=17581 freq=400007576 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121467 bytes_read=376024 bytes_retransmit=0 bytes_invalid=0 send_seq=20220 receive_seq=20220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999094 adj=49998766 sd_pos=3492781 heater_bed: target=60 temp=60.0 pwm=0.304 sysload=0.17 cputime=5913.448 memavail=3266464 print_time=19856.086 buffer_time=2.516 print_stall=0 extruder: target=210 temp=208.8 pwm=0.503
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65822.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61443581 bytes_read=9512516 bytes_retransmit=9 bytes_invalid=0 send_seq=1171151 receive_seq=1171151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=22237 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121473 bytes_read=376040 bytes_retransmit=0 bytes_invalid=0 send_seq=20221 receive_seq=20221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999124 adj=49999030 sd_pos=3496626 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.17 cputime=5913.569 memavail=3266464 print_time=19857.515 buffer_time=2.945 print_stall=0 extruder: target=210 temp=208.7 pwm=0.503
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65823.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61455339 bytes_read=9513758 bytes_retransmit=9 bytes_invalid=0 send_seq=1171356 receive_seq=1171356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=13960 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121479 bytes_read=376069 bytes_retransmit=0 bytes_invalid=0 send_seq=20222 receive_seq=20222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999155 adj=49999015 sd_pos=3497148 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.17 cputime=5913.635 memavail=3266464 print_time=19857.866 buffer_time=2.296 print_stall=0 extruder: target=210 temp=208.6 pwm=0.503
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65824.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61467028 bytes_read=9514994 bytes_retransmit=9 bytes_invalid=0 send_seq=1171560 receive_seq=1171560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=9851 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121485 bytes_read=376085 bytes_retransmit=0 bytes_invalid=0 send_seq=20223 receive_seq=20223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999187 adj=49999311 sd_pos=3499794 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.15 cputime=5913.748 memavail=3266464 print_time=19858.832 buffer_time=2.261 print_stall=0 extruder: target=210 temp=208.9 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65825.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61478139 bytes_read=9516116 bytes_retransmit=9 bytes_invalid=0 send_seq=1171744 receive_seq=1171744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=8027 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121491 bytes_read=376101 bytes_retransmit=0 bytes_invalid=0 send_seq=20224 receive_seq=20224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999220 adj=49999668 sd_pos=3501405 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.15 cputime=5913.938 memavail=3266464 print_time=19860.062 buffer_time=2.490 print_stall=0 extruder: target=210 temp=209.2 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65826.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61485990 bytes_read=9516993 bytes_retransmit=9 bytes_invalid=0 send_seq=1171876 receive_seq=1171876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=15382 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121497 bytes_read=376117 bytes_retransmit=0 bytes_invalid=0 send_seq=20225 receive_seq=20225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999256 adj=49999705 sd_pos=3503746 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.15 cputime=5914.047 memavail=3266216 print_time=19861.469 buffer_time=2.896 print_stall=0 extruder: target=210 temp=209.6 pwm=0.312
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65827.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61491679 bytes_read=9517755 bytes_retransmit=9 bytes_invalid=0 send_seq=1171982 receive_seq=1171982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=24689 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121503 bytes_read=376133 bytes_retransmit=0 bytes_invalid=0 send_seq=20226 receive_seq=20226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999292 adj=49999565 sd_pos=3506809 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.15 cputime=5914.145 memavail=3266216 print_time=19862.845 buffer_time=3.272 print_stall=0 extruder: target=210 temp=210.3 pwm=0.251
Stats 65828.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61502810 bytes_read=9518922 bytes_retransmit=9 bytes_invalid=0 send_seq=1172175 receive_seq=1172175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=14677 freq=400007591 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121509 bytes_read=376149 bytes_retransmit=0 bytes_invalid=0 send_seq=20227 receive_seq=20227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999331 adj=49999523 sd_pos=3506809 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.15 cputime=5914.194 memavail=3266216 print_time=19862.845 buffer_time=2.271 print_stall=0 extruder: target=210 temp=210.7 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65829.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61514144 bytes_read=9520124 bytes_retransmit=9 bytes_invalid=0 send_seq=1172372 receive_seq=1172372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=19370 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121515 bytes_read=376178 bytes_retransmit=0 bytes_invalid=0 send_seq=20228 receive_seq=20228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999370 adj=49999842 sd_pos=3509300 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.14 cputime=5914.312 memavail=3266228 print_time=19864.352 buffer_time=2.777 print_stall=0 extruder: target=210 temp=211.0 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65830.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61525736 bytes_read=9521355 bytes_retransmit=9 bytes_invalid=0 send_seq=1172575 receive_seq=1172575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=14722 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121521 bytes_read=376194 bytes_retransmit=0 bytes_invalid=0 send_seq=20229 receive_seq=20229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999416 adj=50000082 sd_pos=3511496 heater_bed: target=60 temp=60.0 pwm=0.196 sysload=0.14 cputime=5914.440 memavail=3270020 print_time=19864.953 buffer_time=2.378 print_stall=0 extruder: target=210 temp=211.1 pwm=0.251
Stats 65831.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61536807 bytes_read=9522527 bytes_retransmit=9 bytes_invalid=0 send_seq=1172769 receive_seq=1172769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=7761 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121527 bytes_read=376210 bytes_retransmit=0 bytes_invalid=0 send_seq=20230 receive_seq=20230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999463 adj=50000560 sd_pos=3511635 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.14 cputime=5914.726 memavail=3269012 print_time=19865.705 buffer_time=2.129 print_stall=0 extruder: target=210 temp=211.2 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65832.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61547876 bytes_read=9523681 bytes_retransmit=9 bytes_invalid=0 send_seq=1172954 receive_seq=1172954 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1144 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121533 bytes_read=376226 bytes_retransmit=0 bytes_invalid=0 send_seq=20231 receive_seq=20231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999509 adj=50001107 sd_pos=3512043 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.14 cputime=5914.920 memavail=3268004 print_time=19866.617 buffer_time=2.039 print_stall=0 extruder: target=210 temp=211.1 pwm=0.262
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65833.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61553811 bytes_read=9524432 bytes_retransmit=9 bytes_invalid=0 send_seq=1173061 receive_seq=1173061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=798 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121539 bytes_read=376242 bytes_retransmit=0 bytes_invalid=0 send_seq=20232 receive_seq=20232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999553 adj=50001461 sd_pos=3512414 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.14 cputime=5915.100 memavail=3267516 print_time=19867.594 buffer_time=2.016 print_stall=0 extruder: target=210 temp=210.9 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65834.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61558168 bytes_read=9525039 bytes_retransmit=9 bytes_invalid=0 send_seq=1173142 receive_seq=1173142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3497 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121545 bytes_read=376271 bytes_retransmit=0 bytes_invalid=0 send_seq=20233 receive_seq=20233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999599 adj=50001508 sd_pos=3514025 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.13 cputime=5915.287 memavail=3266284 print_time=19869.052 buffer_time=2.474 print_stall=0 extruder: target=210 temp=210.7 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65835.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61563548 bytes_read=9525711 bytes_retransmit=9 bytes_invalid=0 send_seq=1173233 receive_seq=1173233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=3897 freq=400007814 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121551 bytes_read=376287 bytes_retransmit=0 bytes_invalid=0 send_seq=20234 receive_seq=20234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999643 adj=50000799 sd_pos=3515759 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.13 cputime=5915.395 memavail=3266036 print_time=19869.878 buffer_time=2.299 print_stall=0 extruder: target=210 temp=210.4 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65836.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61568238 bytes_read=9526372 bytes_retransmit=9 bytes_invalid=0 send_seq=1173322 receive_seq=1173322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=4668 freq=400007811 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121557 bytes_read=376303 bytes_retransmit=0 bytes_invalid=0 send_seq=20235 receive_seq=20235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999691 adj=50000974 sd_pos=3516876 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.13 cputime=5915.492 memavail=3267804 print_time=19870.669 buffer_time=2.090 print_stall=0 extruder: target=210 temp=209.9 pwm=0.438
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65837.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61575768 bytes_read=9527255 bytes_retransmit=9 bytes_invalid=0 send_seq=1173455 receive_seq=1173455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=13709 freq=400007795 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121563 bytes_read=376319 bytes_retransmit=0 bytes_invalid=0 send_seq=20236 receive_seq=20236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999737 adj=50001474 sd_pos=3520886 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.13 cputime=5915.656 memavail=3271420 print_time=19872.158 buffer_time=2.578 print_stall=0 extruder: target=210 temp=209.4 pwm=0.438
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65838.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61582341 bytes_read=9528067 bytes_retransmit=9 bytes_invalid=0 send_seq=1173574 receive_seq=1173574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=22606 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121569 bytes_read=376335 bytes_retransmit=0 bytes_invalid=0 send_seq=20237 receive_seq=20237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999783 adj=50000822 sd_pos=3523425 heater_bed: target=60 temp=60.0 pwm=0.049 sysload=0.13 cputime=5915.764 memavail=3271420 print_time=19873.592 buffer_time=3.011 print_stall=0 extruder: target=210 temp=209.1 pwm=0.505
Stats 65839.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61594166 bytes_read=9529323 bytes_retransmit=9 bytes_invalid=0 send_seq=1173782 receive_seq=1173782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=11965 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121575 bytes_read=376364 bytes_retransmit=0 bytes_invalid=0 send_seq=20238 receive_seq=20238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999831 adj=50000581 sd_pos=3523425 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.12 cputime=5915.813 memavail=3270420 print_time=19873.592 buffer_time=2.011 print_stall=0 extruder: target=210 temp=208.8 pwm=0.505
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65840.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61605657 bytes_read=9530520 bytes_retransmit=9 bytes_invalid=0 send_seq=1173981 receive_seq=1173981 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16532 freq=400007745 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121581 bytes_read=376380 bytes_retransmit=0 bytes_invalid=0 send_seq=20239 receive_seq=20239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999878 adj=50001045 sd_pos=3525891 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.12 cputime=5915.933 memavail=3270420 print_time=19875.064 buffer_time=2.482 print_stall=0 extruder: target=210 temp=208.8 pwm=0.505
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65841.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61617385 bytes_read=9531732 bytes_retransmit=9 bytes_invalid=0 send_seq=1174180 receive_seq=1174180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=15847 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121587 bytes_read=376396 bytes_retransmit=0 bytes_invalid=0 send_seq=20240 receive_seq=20240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999924 adj=50001511 sd_pos=3529558 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.12 cputime=5916.030 memavail=3269664 print_time=19876.232 buffer_time=2.625 print_stall=0 extruder: target=210 temp=208.8 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65842.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61628499 bytes_read=9532923 bytes_retransmit=9 bytes_invalid=0 send_seq=1174372 receive_seq=1174372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=9168 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121593 bytes_read=376412 bytes_retransmit=0 bytes_invalid=0 send_seq=20241 receive_seq=20241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999984 adj=50001412 sd_pos=3530664 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.12 cputime=5916.151 memavail=3269668 print_time=19876.710 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.1 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65843.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61639938 bytes_read=9534125 bytes_retransmit=9 bytes_invalid=0 send_seq=1174573 receive_seq=1174573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=6286 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121599 bytes_read=376428 bytes_retransmit=0 bytes_invalid=0 send_seq=20242 receive_seq=20242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000029 adj=50002040 sd_pos=3532343 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.12 cputime=5916.316 memavail=3269668 print_time=19877.785 buffer_time=2.177 print_stall=0 extruder: target=210 temp=209.6 pwm=0.320
Stats 65844.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61647342 bytes_read=9535007 bytes_retransmit=9 bytes_invalid=0 send_seq=1174706 receive_seq=1174706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=16741 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121605 bytes_read=376457 bytes_retransmit=0 bytes_invalid=0 send_seq=20243 receive_seq=20243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=50002378 sd_pos=3534798 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.11 cputime=5916.417 memavail=3269668 print_time=19879.101 buffer_time=2.493 print_stall=0 extruder: target=210 temp=210.1 pwm=0.265
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65845.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61654276 bytes_read=9535863 bytes_retransmit=9 bytes_invalid=0 send_seq=1174834 receive_seq=1174834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=26244 freq=400007719 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121611 bytes_read=376473 bytes_retransmit=0 bytes_invalid=0 send_seq=20244 receive_seq=20244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000122 adj=50001767 sd_pos=3537181 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.11 cputime=5916.521 memavail=3269668 print_time=19880.507 buffer_time=2.898 print_stall=0 extruder: target=210 temp=210.6 pwm=0.265
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65846.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61668445 bytes_read=9537240 bytes_retransmit=9 bytes_invalid=0 send_seq=1175069 receive_seq=1175069 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=25027 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121617 bytes_read=376489 bytes_retransmit=0 bytes_invalid=0 send_seq=20245 receive_seq=20245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000167 adj=50001331 sd_pos=3539568 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.11 cputime=5916.618 memavail=3269668 print_time=19881.568 buffer_time=2.957 print_stall=0 extruder: target=210 temp=211.0 pwm=0.207
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65847.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61682875 bytes_read=9538708 bytes_retransmit=9 bytes_invalid=0 send_seq=1175316 receive_seq=1175316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=20037 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121623 bytes_read=376505 bytes_retransmit=0 bytes_invalid=0 send_seq=20246 receive_seq=20246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000212 adj=50001403 sd_pos=3541226 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.11 cputime=5916.738 memavail=3269668 print_time=19882.367 buffer_time=2.744 print_stall=0 extruder: target=210 temp=211.1 pwm=0.207
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65848.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61694573 bytes_read=9539919 bytes_retransmit=9 bytes_invalid=0 send_seq=1175515 receive_seq=1175515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=12318 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=121629 bytes_read=376521 bytes_retransmit=0 bytes_invalid=0 send_seq=20247 receive_seq=20247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000260 adj=50001768 sd_pos=3541383 heater_bed: target=60 temp=60.0 pwm=0.290 sysload=0.11 cputime=5916.906 memavail=3269668 print_time=19882.812 buffer_time=2.189 print_stall=0 extruder: target=210 temp=211.2 pwm=0.258
Stats 65849.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61706277 bytes_read=9541151 bytes_retransmit=9 bytes_invalid=0 send_seq=1175718 receive_seq=1175718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=5169 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121635 bytes_read=376550 bytes_retransmit=0 bytes_invalid=0 send_seq=20248 receive_seq=20248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000311 adj=50002292 sd_pos=3541651 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.18 cputime=5917.191 memavail=3268920 print_time=19883.807 buffer_time=2.150 print_stall=0 extruder: target=210 temp=211.1 pwm=0.258
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65850.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61716482 bytes_read=9542267 bytes_retransmit=9 bytes_invalid=0 send_seq=1175898 receive_seq=1175898 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=295 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121641 bytes_read=376566 bytes_retransmit=0 bytes_invalid=0 send_seq=20249 receive_seq=20249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000355 adj=50002931 sd_pos=3542174 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.18 cputime=5917.346 memavail=3268176 print_time=19884.685 buffer_time=2.026 print_stall=0 extruder: target=210 temp=210.8 pwm=0.317
Stats 65851.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61720442 bytes_read=9542809 bytes_retransmit=9 bytes_invalid=0 send_seq=1175966 receive_seq=1175966 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=297 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121647 bytes_read=376582 bytes_retransmit=0 bytes_invalid=0 send_seq=20250 receive_seq=20250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000399 adj=50003166 sd_pos=3542262 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.18 cputime=5917.549 memavail=3266664 print_time=19885.739 buffer_time=2.081 print_stall=0 extruder: target=210 temp=210.4 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65852.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61725653 bytes_read=9543532 bytes_retransmit=9 bytes_invalid=0 send_seq=1176064 receive_seq=1176064 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=1565 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121653 bytes_read=376598 bytes_retransmit=0 bytes_invalid=0 send_seq=20251 receive_seq=20251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000442 adj=50002887 sd_pos=3544182 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.18 cputime=5917.667 memavail=3265908 print_time=19886.816 buffer_time=2.157 print_stall=0 extruder: target=210 temp=210.0 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65853.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61729542 bytes_read=9544124 bytes_retransmit=9 bytes_invalid=0 send_seq=1176140 receive_seq=1176140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=8617 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121659 bytes_read=376614 bytes_retransmit=0 bytes_invalid=0 send_seq=20252 receive_seq=20252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000486 adj=50002617 sd_pos=3546868 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.18 cputime=5917.830 memavail=3265908 print_time=19888.340 buffer_time=2.680 print_stall=0 extruder: target=210 temp=209.6 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65854.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61735811 bytes_read=9544904 bytes_retransmit=9 bytes_invalid=0 send_seq=1176256 receive_seq=1176256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=19228 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121665 bytes_read=376643 bytes_retransmit=0 bytes_invalid=0 send_seq=20253 receive_seq=20253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000528 adj=50001756 sd_pos=3549406 heater_bed: target=60 temp=60.0 pwm=0.089 sysload=0.17 cputime=5917.983 memavail=3265908 print_time=19889.797 buffer_time=3.137 print_stall=0 extruder: target=210 temp=209.4 pwm=0.430
Stats 65855.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61742886 bytes_read=9545761 bytes_retransmit=9 bytes_invalid=0 send_seq=1176384 receive_seq=1176384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=12959 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121671 bytes_read=376659 bytes_retransmit=0 bytes_invalid=0 send_seq=20254 receive_seq=20254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000570 adj=50001302 sd_pos=3549406 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.17 cputime=5918.022 memavail=3265908 print_time=19889.797 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.1 pwm=0.480
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65856.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61753087 bytes_read=9546893 bytes_retransmit=9 bytes_invalid=0 send_seq=1176565 receive_seq=1176565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=18457 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121683 bytes_read=376691 bytes_retransmit=0 bytes_invalid=0 send_seq=20256 receive_seq=20256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000655 adj=50001678 sd_pos=3552280 heater_bed: target=60 temp=60.0 pwm=0.243 sysload=0.17 cputime=5918.122 memavail=3265908 print_time=19891.160 buffer_time=2.499 print_stall=0 extruder: target=210 temp=208.9 pwm=0.480
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65857.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61765528 bytes_read=9548196 bytes_retransmit=9 bytes_invalid=0 send_seq=1176783 receive_seq=1176782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=24026 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121689 bytes_read=376707 bytes_retransmit=0 bytes_invalid=0 send_seq=20257 receive_seq=20257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000697 adj=50002624 sd_pos=3555175 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.17 cputime=5918.234 memavail=3269824 print_time=19892.473 buffer_time=2.811 print_stall=0 extruder: target=210 temp=208.9 pwm=0.480
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65858.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61777369 bytes_read=9549403 bytes_retransmit=9 bytes_invalid=0 send_seq=1176980 receive_seq=1176980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=17551 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121695 bytes_read=376723 bytes_retransmit=0 bytes_invalid=0 send_seq=20258 receive_seq=20258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000736 adj=50002264 sd_pos=3556764 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.17 cputime=5918.297 memavail=3269572 print_time=19892.839 buffer_time=2.177 print_stall=0 extruder: target=210 temp=208.9 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65859.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61790210 bytes_read=9550734 bytes_retransmit=9 bytes_invalid=0 send_seq=1177203 receive_seq=1177203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=12606 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121701 bytes_read=376752 bytes_retransmit=0 bytes_invalid=0 send_seq=20259 receive_seq=20259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000775 adj=50002667 sd_pos=3559531 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.15 cputime=5918.428 memavail=3268856 print_time=19893.844 buffer_time=2.180 print_stall=0 extruder: target=210 temp=209.3 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65860.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61804110 bytes_read=9552146 bytes_retransmit=9 bytes_invalid=0 send_seq=1177445 receive_seq=1177445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=9999 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121707 bytes_read=376768 bytes_retransmit=0 bytes_invalid=0 send_seq=20260 receive_seq=20260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000813 adj=50003137 sd_pos=3562123 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.15 cputime=5918.606 memavail=3268856 print_time=19895.195 buffer_time=2.531 print_stall=0 extruder: target=210 temp=209.6 pwm=0.356
Stats 65861.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61812258 bytes_read=9553093 bytes_retransmit=9 bytes_invalid=0 send_seq=1177591 receive_seq=1177591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=15609 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121713 bytes_read=376784 bytes_retransmit=0 bytes_invalid=0 send_seq=20261 receive_seq=20261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000852 adj=50002502 sd_pos=3563766 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.15 cputime=5918.732 memavail=3268856 print_time=19896.305 buffer_time=2.640 print_stall=0 extruder: target=210 temp=209.9 pwm=0.297
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65862.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61818576 bytes_read=9553895 bytes_retransmit=9 bytes_invalid=0 send_seq=1177706 receive_seq=1177705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=23888 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121719 bytes_read=376800 bytes_retransmit=0 bytes_invalid=0 send_seq=20262 receive_seq=20262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000890 adj=50002362 sd_pos=3565750 heater_bed: target=60 temp=60.0 pwm=0.013 sysload=0.15 cputime=5918.848 memavail=3268856 print_time=19897.550 buffer_time=2.884 print_stall=0 extruder: target=210 temp=210.5 pwm=0.297
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65863.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61831261 bytes_read=9555212 bytes_retransmit=9 bytes_invalid=0 send_seq=1177928 receive_seq=1177928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=19833 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121725 bytes_read=376816 bytes_retransmit=0 bytes_invalid=0 send_seq=20263 receive_seq=20263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000927 adj=50002083 sd_pos=3567468 heater_bed: target=60 temp=60.0 pwm=0.269 sysload=0.15 cputime=5918.933 memavail=3268856 print_time=19898.181 buffer_time=2.514 print_stall=0 extruder: target=210 temp=210.8 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65864.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61844848 bytes_read=9556604 bytes_retransmit=9 bytes_invalid=0 send_seq=1178164 receive_seq=1178164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=11314 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121731 bytes_read=376845 bytes_retransmit=0 bytes_invalid=0 send_seq=20264 receive_seq=20264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000963 adj=50002476 sd_pos=3567761 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.14 cputime=5919.129 memavail=3268856 print_time=19898.880 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.9 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65865.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61857152 bytes_read=9557895 bytes_retransmit=9 bytes_invalid=0 send_seq=1178379 receive_seq=1178379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=4421 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121737 bytes_read=376861 bytes_retransmit=0 bytes_invalid=0 send_seq=20265 receive_seq=20265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000998 adj=50002896 sd_pos=3568257 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.14 cputime=5919.380 memavail=3268352 print_time=19900.092 buffer_time=2.374 print_stall=0 extruder: target=210 temp=211.0 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65866.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=61865644 bytes_read=9558852 bytes_retransmit=9 bytes_invalid=0 send_seq=1178530 receive_seq=1178530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=342 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121743 bytes_read=376877 bytes_retransmit=0 bytes_invalid=0 send_seq=20266 receive_seq=20266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001033 adj=50002699 sd_pos=3568476 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.14 cputime=5919.516 memavail=3268112 print_time=19900.762 buffer_time=2.043 print_stall=0 extruder: target=210 temp=210.9 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65867.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61869573 bytes_read=9559450 bytes_retransmit=9 bytes_invalid=0 send_seq=1178603 receive_seq=1178603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1141 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121749 bytes_read=376893 bytes_retransmit=0 bytes_invalid=0 send_seq=20267 receive_seq=20267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001067 adj=50003140 sd_pos=3568840 heater_bed: target=60 temp=60.0 pwm=0.011 sysload=0.14 cputime=5919.735 memavail=3267104 print_time=19901.980 buffer_time=2.259 print_stall=0 extruder: target=210 temp=210.7 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65868.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61874773 bytes_read=9560141 bytes_retransmit=9 bytes_invalid=0 send_seq=1178698 receive_seq=1178698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2423 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121755 bytes_read=376909 bytes_retransmit=0 bytes_invalid=0 send_seq=20268 receive_seq=20268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001102 adj=50002677 sd_pos=3571329 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.14 cputime=5919.813 memavail=3267104 print_time=19902.788 buffer_time=2.067 print_stall=0 extruder: target=210 temp=210.3 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65869.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61878886 bytes_read=9560713 bytes_retransmit=9 bytes_invalid=0 send_seq=1178772 receive_seq=1178772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=8983 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121761 bytes_read=376938 bytes_retransmit=0 bytes_invalid=0 send_seq=20269 receive_seq=20269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001135 adj=50002933 sd_pos=3574046 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.13 cputime=5919.961 memavail=3265624 print_time=19904.227 buffer_time=2.505 print_stall=0 extruder: target=210 temp=210.1 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65870.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61886561 bytes_read=9561575 bytes_retransmit=9 bytes_invalid=0 send_seq=1178901 receive_seq=1178901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=15397 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121767 bytes_read=376954 bytes_retransmit=0 bytes_invalid=0 send_seq=20270 receive_seq=20270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001167 adj=50002157 sd_pos=3575797 heater_bed: target=60 temp=60.0 pwm=0.048 sysload=0.13 cputime=5920.157 memavail=3265624 print_time=19905.379 buffer_time=2.656 print_stall=0 extruder: target=210 temp=209.6 pwm=0.465
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65871.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=61892436 bytes_read=9562331 bytes_retransmit=9 bytes_invalid=0 send_seq=1179009 receive_seq=1179009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=24214 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121773 bytes_read=376970 bytes_retransmit=0 bytes_invalid=0 send_seq=20271 receive_seq=20271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001202 adj=50002041 sd_pos=3577840 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.13 cputime=5920.269 memavail=3265624 print_time=19906.636 buffer_time=2.913 print_stall=0 extruder: target=210 temp=209.2 pwm=0.465
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65872.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61904998 bytes_read=9563649 bytes_retransmit=9 bytes_invalid=0 send_seq=1179229 receive_seq=1179229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=21185 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121779 bytes_read=376986 bytes_retransmit=0 bytes_invalid=0 send_seq=20272 receive_seq=20272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001233 adj=50001871 sd_pos=3580040 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.13 cputime=5920.362 memavail=3265624 print_time=19907.362 buffer_time=2.638 print_stall=0 extruder: target=210 temp=208.9 pwm=0.465
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65873.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61917946 bytes_read=9564951 bytes_retransmit=9 bytes_invalid=0 send_seq=1179446 receive_seq=1179446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=13779 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121785 bytes_read=377002 bytes_retransmit=0 bytes_invalid=0 send_seq=20273 receive_seq=20273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001264 adj=50002190 sd_pos=3581700 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.13 cputime=5920.438 memavail=3265624 print_time=19908.027 buffer_time=2.302 print_stall=0 extruder: target=210 temp=208.7 pwm=0.465
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65874.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61930057 bytes_read=9566172 bytes_retransmit=9 bytes_invalid=0 send_seq=1179647 receive_seq=1179647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=8113 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121791 bytes_read=377031 bytes_retransmit=0 bytes_invalid=0 send_seq=20274 receive_seq=20274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001297 adj=50002527 sd_pos=3583474 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.12 cputime=5920.563 memavail=3265624 print_time=19908.920 buffer_time=2.194 print_stall=0 extruder: target=210 temp=208.8 pwm=0.462
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65875.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61940759 bytes_read=9567314 bytes_retransmit=9 bytes_invalid=0 send_seq=1179833 receive_seq=1179833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=19973 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121797 bytes_read=377047 bytes_retransmit=0 bytes_invalid=0 send_seq=20275 receive_seq=20275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001330 adj=50002756 sd_pos=3586808 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.12 cputime=5920.799 memavail=3265624 print_time=19911.037 buffer_time=3.260 print_stall=0 extruder: target=210 temp=208.9 pwm=0.462
Stats 65876.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61947617 bytes_read=9568100 bytes_retransmit=9 bytes_invalid=0 send_seq=1179947 receive_seq=1179947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=13832 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121803 bytes_read=377063 bytes_retransmit=0 bytes_invalid=0 send_seq=20276 receive_seq=20276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001359 adj=50001614 sd_pos=3586808 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.12 cputime=5920.837 memavail=3265624 print_time=19911.037 buffer_time=2.259 print_stall=0 extruder: target=210 temp=209.3 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65877.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61957019 bytes_read=9569153 bytes_retransmit=9 bytes_invalid=0 send_seq=1180114 receive_seq=1180114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=20233 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121809 bytes_read=377079 bytes_retransmit=0 bytes_invalid=0 send_seq=20277 receive_seq=20277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001388 adj=50001835 sd_pos=3589043 heater_bed: target=60 temp=60.0 pwm=0.030 sysload=0.12 cputime=5920.953 memavail=3265624 print_time=19912.303 buffer_time=2.524 print_stall=0 extruder: target=210 temp=209.7 pwm=0.346
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65878.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61969456 bytes_read=9570455 bytes_retransmit=9 bytes_invalid=0 send_seq=1180331 receive_seq=1180331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=19529 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=121815 bytes_read=377095 bytes_retransmit=0 bytes_invalid=0 send_seq=20278 receive_seq=20278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001419 adj=50002133 sd_pos=3591749 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.12 cputime=5921.041 memavail=3265624 print_time=19913.308 buffer_time=2.528 print_stall=0 extruder: target=210 temp=210.1 pwm=0.292
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65879.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61982444 bytes_read=9571796 bytes_retransmit=9 bytes_invalid=0 send_seq=1180556 receive_seq=1180556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=11068 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121821 bytes_read=377124 bytes_retransmit=0 bytes_invalid=0 send_seq=20279 receive_seq=20279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001448 adj=50002331 sd_pos=3592032 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.11 cputime=5921.192 memavail=3264636 print_time=19913.897 buffer_time=2.117 print_stall=0 extruder: target=210 temp=210.6 pwm=0.292
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65880.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=61995198 bytes_read=9573103 bytes_retransmit=9 bytes_invalid=0 send_seq=1180777 receive_seq=1180777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=3952 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121827 bytes_read=377140 bytes_retransmit=0 bytes_invalid=0 send_seq=20280 receive_seq=20280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001474 adj=50002647 sd_pos=3592530 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.11 cputime=5921.458 memavail=3264636 print_time=19915.127 buffer_time=2.346 print_stall=0 extruder: target=210 temp=210.8 pwm=0.292
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65881.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62003219 bytes_read=9574025 bytes_retransmit=9 bytes_invalid=0 send_seq=1180918 receive_seq=1180918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=945 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121833 bytes_read=377156 bytes_retransmit=0 bytes_invalid=0 send_seq=20281 receive_seq=20281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001499 adj=50002444 sd_pos=3592783 heater_bed: target=60 temp=60.0 pwm=0.312 sysload=0.11 cputime=5921.712 memavail=3264132 print_time=19916.022 buffer_time=2.209 print_stall=0 extruder: target=210 temp=211.0 pwm=0.241
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65882.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62007293 bytes_read=9574647 bytes_retransmit=9 bytes_invalid=0 send_seq=1180996 receive_seq=1180996 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=567 freq=400007871 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121839 bytes_read=377172 bytes_retransmit=0 bytes_invalid=0 send_seq=20282 receive_seq=20282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001525 adj=50002552 sd_pos=3593096 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.11 cputime=5921.879 memavail=3263124 print_time=19916.963 buffer_time=2.150 print_stall=0 extruder: target=210 temp=211.2 pwm=0.241
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65883.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62012490 bytes_read=9575289 bytes_retransmit=9 bytes_invalid=0 send_seq=1181084 receive_seq=1181084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=4429 freq=400007854 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121845 bytes_read=377188 bytes_retransmit=0 bytes_invalid=0 send_seq=20283 receive_seq=20283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001549 adj=50002269 sd_pos=3596109 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.11 cputime=5922.012 memavail=3263124 print_time=19918.261 buffer_time=2.439 print_stall=0 extruder: target=210 temp=211.0 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65884.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62016432 bytes_read=9575886 bytes_retransmit=9 bytes_invalid=0 send_seq=1181160 receive_seq=1181160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9344 freq=400007848 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121851 bytes_read=377217 bytes_retransmit=0 bytes_invalid=0 send_seq=20284 receive_seq=20284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001576 adj=50001978 sd_pos=3598342 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.18 cputime=5922.106 memavail=3263124 print_time=19919.256 buffer_time=2.434 print_stall=0 extruder: target=210 temp=211.0 pwm=0.305
Stats 65885.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62024502 bytes_read=9576825 bytes_retransmit=9 bytes_invalid=0 send_seq=1181305 receive_seq=1181305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=15876 freq=400007855 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121857 bytes_read=377233 bytes_retransmit=0 bytes_invalid=0 send_seq=20285 receive_seq=20285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001599 adj=50002055 sd_pos=3600691 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.18 cputime=5922.214 memavail=3268028 print_time=19920.514 buffer_time=2.690 print_stall=0 extruder: target=210 temp=210.5 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65886.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62031038 bytes_read=9577569 bytes_retransmit=9 bytes_invalid=0 send_seq=1181414 receive_seq=1181414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=24889 freq=400007852 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121863 bytes_read=377249 bytes_retransmit=0 bytes_invalid=0 send_seq=20286 receive_seq=20286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001624 adj=50001869 sd_pos=3603012 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.18 cputime=5922.375 memavail=3268028 print_time=19921.855 buffer_time=3.030 print_stall=0 extruder: target=210 temp=210.0 pwm=0.423
Stats 65887.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62043456 bytes_read=9578877 bytes_retransmit=9 bytes_invalid=0 send_seq=1181629 receive_seq=1181629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=13748 freq=400007869 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121869 bytes_read=377265 bytes_retransmit=0 bytes_invalid=0 send_seq=20287 receive_seq=20287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001644 adj=50001740 sd_pos=3603012 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.18 cputime=5922.424 memavail=3268028 print_time=19921.855 buffer_time=2.030 print_stall=0 extruder: target=210 temp=209.6 pwm=0.481
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65888.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62055910 bytes_read=9580178 bytes_retransmit=9 bytes_invalid=0 send_seq=1181846 receive_seq=1181846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=14966 freq=400007861 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121875 bytes_read=377281 bytes_retransmit=0 bytes_invalid=0 send_seq=20288 receive_seq=20288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001664 adj=50001906 sd_pos=3607050 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.18 cputime=5922.530 memavail=3266772 print_time=19923.184 buffer_time=2.358 print_stall=0 extruder: target=210 temp=209.0 pwm=0.481
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65889.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62068023 bytes_read=9581395 bytes_retransmit=9 bytes_invalid=0 send_seq=1182049 receive_seq=1182049 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=9611 freq=400007838 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121881 bytes_read=377310 bytes_retransmit=0 bytes_invalid=0 send_seq=20289 receive_seq=20289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001684 adj=50002130 sd_pos=3608727 heater_bed: target=60 temp=60.0 pwm=0.278 sysload=0.16 cputime=5922.655 memavail=3266776 print_time=19924.067 buffer_time=2.240 print_stall=0 extruder: target=210 temp=208.8 pwm=0.481
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65890.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62079130 bytes_read=9582587 bytes_retransmit=9 bytes_invalid=0 send_seq=1182244 receive_seq=1182244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=8289 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121887 bytes_read=377326 bytes_retransmit=0 bytes_invalid=0 send_seq=20290 receive_seq=20290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001703 adj=50002338 sd_pos=3610521 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.16 cputime=5922.770 memavail=3266776 print_time=19925.162 buffer_time=2.335 print_stall=0 extruder: target=210 temp=208.9 pwm=0.481
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65891.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62086607 bytes_read=9583473 bytes_retransmit=9 bytes_invalid=0 send_seq=1182378 receive_seq=1182378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=16518 freq=400007828 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121893 bytes_read=377342 bytes_retransmit=0 bytes_invalid=0 send_seq=20291 receive_seq=20291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001724 adj=50002206 sd_pos=3613807 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.16 cputime=5922.885 memavail=3266776 print_time=19926.582 buffer_time=2.755 print_stall=0 extruder: target=210 temp=209.0 pwm=0.459
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65892.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62094304 bytes_read=9584381 bytes_retransmit=9 bytes_invalid=0 send_seq=1182516 receive_seq=1182516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=24800 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121899 bytes_read=377358 bytes_retransmit=0 bytes_invalid=0 send_seq=20292 receive_seq=20292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001746 adj=50001876 sd_pos=3616290 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.16 cputime=5923.057 memavail=3266780 print_time=19928.062 buffer_time=3.234 print_stall=0 extruder: target=210 temp=209.4 pwm=0.341
Stats 65893.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62106095 bytes_read=9585647 bytes_retransmit=9 bytes_invalid=0 send_seq=1182723 receive_seq=1182723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=14216 freq=400007817 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121905 bytes_read=377374 bytes_retransmit=0 bytes_invalid=0 send_seq=20293 receive_seq=20293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001765 adj=50001702 sd_pos=3616290 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.16 cputime=5923.106 memavail=3266780 print_time=19928.062 buffer_time=2.233 print_stall=0 extruder: target=210 temp=209.8 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65894.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62117462 bytes_read=9586854 bytes_retransmit=9 bytes_invalid=0 send_seq=1182924 receive_seq=1182924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=16397 freq=400007805 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121911 bytes_read=377403 bytes_retransmit=0 bytes_invalid=0 send_seq=20294 receive_seq=20294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001782 adj=50001872 sd_pos=3619305 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.15 cputime=5923.205 memavail=3266780 print_time=19929.184 buffer_time=2.353 print_stall=0 extruder: target=210 temp=210.3 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65895.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62128963 bytes_read=9588056 bytes_retransmit=9 bytes_invalid=0 send_seq=1183124 receive_seq=1183124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=9821 freq=400007783 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121917 bytes_read=377418 bytes_retransmit=0 bytes_invalid=0 send_seq=20295 receive_seq=20295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001800 adj=50002050 sd_pos=3619643 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.15 cputime=5923.353 memavail=3266780 print_time=19929.920 buffer_time=2.089 print_stall=0 extruder: target=210 temp=210.6 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65896.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62140530 bytes_read=9589282 bytes_retransmit=9 bytes_invalid=0 send_seq=1183324 receive_seq=1183324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3676 freq=400007783 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121923 bytes_read=377433 bytes_retransmit=0 bytes_invalid=0 send_seq=20296 receive_seq=20296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001818 adj=50002270 sd_pos=3620097 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.15 cputime=5923.604 memavail=3266528 print_time=19931.105 buffer_time=2.273 print_stall=0 extruder: target=210 temp=211.0 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65897.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62148491 bytes_read=9590215 bytes_retransmit=9 bytes_invalid=0 send_seq=1183467 receive_seq=1183467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1252 freq=400007769 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121929 bytes_read=377448 bytes_retransmit=0 bytes_invalid=0 send_seq=20297 receive_seq=20297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001834 adj=50002320 sd_pos=3620352 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.15 cputime=5923.823 memavail=3266528 print_time=19932.058 buffer_time=2.182 print_stall=0 extruder: target=210 temp=211.1 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65898.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62152413 bytes_read=9590817 bytes_retransmit=9 bytes_invalid=0 send_seq=1183544 receive_seq=1183544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1227 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=121935 bytes_read=377463 bytes_retransmit=0 bytes_invalid=0 send_seq=20298 receive_seq=20298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001850 adj=50002341 sd_pos=3620669 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.15 cputime=5923.994 memavail=3264436 print_time=19933.003 buffer_time=2.126 print_stall=0 extruder: target=210 temp=211.2 pwm=0.259
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65899.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62158444 bytes_read=9591548 bytes_retransmit=9 bytes_invalid=0 send_seq=1183647 receive_seq=1183647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=4265 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121941 bytes_read=377491 bytes_retransmit=0 bytes_invalid=0 send_seq=20299 receive_seq=20299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001865 adj=50002350 sd_pos=3623695 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.22 cputime=5924.122 memavail=3264064 print_time=19934.291 buffer_time=2.378 print_stall=0 extruder: target=210 temp=211.0 pwm=0.309
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65900.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62162532 bytes_read=9592150 bytes_retransmit=9 bytes_invalid=0 send_seq=1183727 receive_seq=1183727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9227 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121947 bytes_read=377507 bytes_retransmit=0 bytes_invalid=0 send_seq=20300 receive_seq=20300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001880 adj=50002082 sd_pos=3625369 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.22 cputime=5924.224 memavail=3264064 print_time=19935.417 buffer_time=2.503 print_stall=0 extruder: target=210 temp=210.8 pwm=0.309
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65901.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62170682 bytes_read=9593102 bytes_retransmit=9 bytes_invalid=0 send_seq=1183874 receive_seq=1183874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=17440 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121953 bytes_read=377523 bytes_retransmit=0 bytes_invalid=0 send_seq=20301 receive_seq=20301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001894 adj=50001987 sd_pos=3627973 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.22 cputime=5924.333 memavail=3264064 print_time=19936.896 buffer_time=2.982 print_stall=0 extruder: target=210 temp=210.4 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65902.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62177109 bytes_read=9593874 bytes_retransmit=9 bytes_invalid=0 send_seq=1183982 receive_seq=1183982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=11719 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121959 bytes_read=377539 bytes_retransmit=0 bytes_invalid=0 send_seq=20302 receive_seq=20302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001907 adj=50001736 sd_pos=3629045 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.22 cputime=5924.402 memavail=3264064 print_time=19936.896 buffer_time=1.968 print_stall=0 extruder: target=210 temp=209.8 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65903.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62188440 bytes_read=9595061 bytes_retransmit=9 bytes_invalid=0 send_seq=1184179 receive_seq=1184179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13981 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=121965 bytes_read=377555 bytes_retransmit=0 bytes_invalid=0 send_seq=20303 receive_seq=20303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001920 adj=50001865 sd_pos=3630921 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.22 cputime=5924.505 memavail=3264064 print_time=19938.120 buffer_time=2.192 print_stall=0 extruder: target=210 temp=209.4 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65904.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62200213 bytes_read=9596317 bytes_retransmit=9 bytes_invalid=0 send_seq=1184384 receive_seq=1184384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=18313 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121971 bytes_read=377584 bytes_retransmit=0 bytes_invalid=0 send_seq=20304 receive_seq=20304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001933 adj=50002034 sd_pos=3635012 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.28 cputime=5924.620 memavail=3264064 print_time=19939.529 buffer_time=2.600 print_stall=0 extruder: target=210 temp=208.9 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65905.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62211409 bytes_read=9597454 bytes_retransmit=9 bytes_invalid=0 send_seq=1184571 receive_seq=1184571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=11317 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121977 bytes_read=377600 bytes_retransmit=0 bytes_invalid=0 send_seq=20305 receive_seq=20305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001945 adj=50001919 sd_pos=3636262 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.28 cputime=5924.686 memavail=3265692 print_time=19940.036 buffer_time=2.107 print_stall=0 extruder: target=210 temp=208.7 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65906.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62223242 bytes_read=9598700 bytes_retransmit=9 bytes_invalid=0 send_seq=1184777 receive_seq=1184777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=10231 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121983 bytes_read=377616 bytes_retransmit=0 bytes_invalid=0 send_seq=20306 receive_seq=20306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001958 adj=50002057 sd_pos=3638860 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.28 cputime=5924.869 memavail=3265828 print_time=19941.626 buffer_time=2.652 print_stall=0 extruder: target=210 temp=208.7 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65907.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62232875 bytes_read=9599783 bytes_retransmit=9 bytes_invalid=0 send_seq=1184948 receive_seq=1184948 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=14760 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=121989 bytes_read=377632 bytes_retransmit=0 bytes_invalid=0 send_seq=20307 receive_seq=20307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001972 adj=50001847 sd_pos=3641902 heater_bed: target=60 temp=60.0 pwm=0.264 sysload=0.28 cputime=5924.988 memavail=3265828 print_time=19942.953 buffer_time=2.978 print_stall=0 extruder: target=210 temp=209.1 pwm=0.387
Stats 65908.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62240105 bytes_read=9600651 bytes_retransmit=9 bytes_invalid=0 send_seq=1185079 receive_seq=1185079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=24472 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122001 bytes_read=377664 bytes_retransmit=0 bytes_invalid=0 send_seq=20309 receive_seq=20309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002000 adj=50001733 sd_pos=3644175 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.28 cputime=5925.127 memavail=3264572 print_time=19944.481 buffer_time=3.467 print_stall=0 extruder: target=210 temp=209.4 pwm=0.387
Stats 65909.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62248220 bytes_read=9601593 bytes_retransmit=9 bytes_invalid=0 send_seq=1185224 receive_seq=1185224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=17239 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122007 bytes_read=377693 bytes_retransmit=0 bytes_invalid=0 send_seq=20310 receive_seq=20310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002010 adj=50001722 sd_pos=3644175 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.42 cputime=5925.169 memavail=3264580 print_time=19944.481 buffer_time=2.467 print_stall=0 extruder: target=210 temp=209.9 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65910.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62260010 bytes_read=9602799 bytes_retransmit=9 bytes_invalid=0 send_seq=1185422 receive_seq=1185422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=19638 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122013 bytes_read=377709 bytes_retransmit=0 bytes_invalid=0 send_seq=20311 receive_seq=20311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002019 adj=50001809 sd_pos=3647310 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.42 cputime=5925.273 memavail=3264580 print_time=19945.715 buffer_time=2.700 print_stall=0 extruder: target=210 temp=210.5 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65911.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62271712 bytes_read=9604021 bytes_retransmit=9 bytes_invalid=0 send_seq=1185626 receive_seq=1185626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=11108 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122019 bytes_read=377725 bytes_retransmit=0 bytes_invalid=0 send_seq=20312 receive_seq=20312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002029 adj=50001918 sd_pos=3647426 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.42 cputime=5925.366 memavail=3264580 print_time=19946.048 buffer_time=2.032 print_stall=0 extruder: target=210 temp=210.8 pwm=0.263
Stats 65912.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62283224 bytes_read=9605259 bytes_retransmit=9 bytes_invalid=0 send_seq=1185827 receive_seq=1185827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=4688 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122025 bytes_read=377741 bytes_retransmit=0 bytes_invalid=0 send_seq=20313 receive_seq=20313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002038 adj=50002029 sd_pos=3647739 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.42 cputime=5925.614 memavail=3264084 print_time=19947.123 buffer_time=2.107 print_stall=0 extruder: target=210 temp=211.1 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65913.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62292977 bytes_read=9606330 bytes_retransmit=9 bytes_invalid=0 send_seq=1185998 receive_seq=1185998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1315 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122031 bytes_read=377757 bytes_retransmit=0 bytes_invalid=0 send_seq=20314 receive_seq=20314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002054 adj=50002139 sd_pos=3648187 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.47 cputime=5925.859 memavail=3263076 print_time=19948.252 buffer_time=2.168 print_stall=0 extruder: target=210 temp=211.2 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65914.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62297239 bytes_read=9606952 bytes_retransmit=9 bytes_invalid=0 send_seq=1186079 receive_seq=1186079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=1966 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122037 bytes_read=377786 bytes_retransmit=0 bytes_invalid=0 send_seq=20315 receive_seq=20315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002063 adj=50002240 sd_pos=3648633 heater_bed: target=60 temp=60.0 pwm=0.303 sysload=0.47 cputime=5926.080 memavail=3262320 print_time=19949.485 buffer_time=2.401 print_stall=0 extruder: target=210 temp=211.2 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65915.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62302740 bytes_read=9607688 bytes_retransmit=9 bytes_invalid=0 send_seq=1186183 receive_seq=1186183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2346 freq=400007755 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122043 bytes_read=377802 bytes_retransmit=0 bytes_invalid=0 send_seq=20316 receive_seq=20316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002072 adj=50002007 sd_pos=3650920 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.47 cputime=5926.159 memavail=3262320 print_time=19950.232 buffer_time=2.147 print_stall=0 extruder: target=210 temp=211.1 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65916.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62306701 bytes_read=9608270 bytes_retransmit=9 bytes_invalid=0 send_seq=1186259 receive_seq=1186259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7983 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122049 bytes_read=377818 bytes_retransmit=0 bytes_invalid=0 send_seq=20317 receive_seq=20317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002080 adj=50001856 sd_pos=3653095 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.47 cputime=5926.302 memavail=3261832 print_time=19951.590 buffer_time=2.504 print_stall=0 extruder: target=210 temp=210.8 pwm=0.342
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65917.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62313814 bytes_read=9609145 bytes_retransmit=9 bytes_invalid=0 send_seq=1186388 receive_seq=1186388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=17415 freq=400007733 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122055 bytes_read=377834 bytes_retransmit=0 bytes_invalid=0 send_seq=20318 receive_seq=20318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002088 adj=50001686 sd_pos=3656750 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.47 cputime=5926.421 memavail=3261332 print_time=19953.115 buffer_time=3.027 print_stall=0 extruder: target=210 temp=210.4 pwm=0.393
Stats 65918.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62320343 bytes_read=9609955 bytes_retransmit=9 bytes_invalid=0 send_seq=1186507 receive_seq=1186507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=11644 freq=400007829 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122061 bytes_read=377850 bytes_retransmit=0 bytes_invalid=0 send_seq=20319 receive_seq=20319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002096 adj=50001557 sd_pos=3656750 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.43 cputime=5926.460 memavail=3261080 print_time=19953.115 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.8 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65919.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62330889 bytes_read=9611062 bytes_retransmit=9 bytes_invalid=0 send_seq=1186688 receive_seq=1186688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=15216 freq=400007810 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122067 bytes_read=377879 bytes_retransmit=0 bytes_invalid=0 send_seq=20320 receive_seq=20320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002103 adj=50001527 sd_pos=3658953 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.43 cputime=5926.607 memavail=3261084 print_time=19954.418 buffer_time=2.329 print_stall=0 extruder: target=210 temp=209.3 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65920.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62342705 bytes_read=9612304 bytes_retransmit=9 bytes_invalid=0 send_seq=1186893 receive_seq=1186893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=16486 freq=400007891 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122073 bytes_read=377895 bytes_retransmit=0 bytes_invalid=0 send_seq=20321 receive_seq=20321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002111 adj=50001628 sd_pos=3662058 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.43 cputime=5926.713 memavail=3265432 print_time=19955.529 buffer_time=2.440 print_stall=0 extruder: target=210 temp=208.9 pwm=0.519
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65921.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62354084 bytes_read=9613505 bytes_retransmit=9 bytes_invalid=0 send_seq=1187090 receive_seq=1187090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=9833 freq=400007891 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122079 bytes_read=377911 bytes_retransmit=0 bytes_invalid=0 send_seq=20322 receive_seq=20322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002116 adj=50001518 sd_pos=3663583 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.43 cputime=5926.786 memavail=3265552 print_time=19956.114 buffer_time=2.023 print_stall=0 extruder: target=210 temp=208.5 pwm=0.519
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65922.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62365173 bytes_read=9614653 bytes_retransmit=9 bytes_invalid=0 send_seq=1187276 receive_seq=1187276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=15180 freq=400007874 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122085 bytes_read=377927 bytes_retransmit=0 bytes_invalid=0 send_seq=20323 receive_seq=20323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002124 adj=50001588 sd_pos=3668744 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.43 cputime=5926.991 memavail=3265072 print_time=19958.100 buffer_time=3.009 print_stall=0 extruder: target=210 temp=208.6 pwm=0.519
Stats 65923.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62374346 bytes_read=9615670 bytes_retransmit=9 bytes_invalid=0 send_seq=1187437 receive_seq=1187436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=7008 freq=400007854 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122091 bytes_read=377943 bytes_retransmit=0 bytes_invalid=0 send_seq=20324 receive_seq=20324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002129 adj=50001435 sd_pos=3668744 heater_bed: target=60 temp=60.0 pwm=0.342 sysload=0.39 cputime=5927.035 memavail=3264568 print_time=19958.100 buffer_time=2.008 print_stall=0 extruder: target=210 temp=208.8 pwm=0.461
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65924.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62380943 bytes_read=9616486 bytes_retransmit=9 bytes_invalid=0 send_seq=1187556 receive_seq=1187556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=23615 freq=400007832 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=122097 bytes_read=377972 bytes_retransmit=0 bytes_invalid=0 send_seq=20325 receive_seq=20325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002134 adj=50001505 sd_pos=3672915 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.39 cputime=5927.229 memavail=3264568 print_time=19960.318 buffer_time=3.225 print_stall=0 extruder: target=210 temp=209.3 pwm=0.345
Stats 65925.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62391983 bytes_read=9617653 bytes_retransmit=9 bytes_invalid=0 send_seq=1187749 receive_seq=1187749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=13726 freq=400007915 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=122103 bytes_read=377988 bytes_retransmit=0 bytes_invalid=0 send_seq=20326 receive_seq=20326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002138 adj=50001445 sd_pos=3672915 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.39 cputime=5927.277 memavail=3264568 print_time=19960.318 buffer_time=2.224 print_stall=0 extruder: target=210 temp=209.8 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65926.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62402382 bytes_read=9618780 bytes_retransmit=9 bytes_invalid=0 send_seq=1187931 receive_seq=1187931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=13622 freq=400007897 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=122109 bytes_read=378004 bytes_retransmit=0 bytes_invalid=0 send_seq=20327 receive_seq=20327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002143 adj=50001393 sd_pos=3676154 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.39 cputime=5927.363 memavail=3264568 print_time=19961.164 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.3 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65927.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62414305 bytes_read=9620017 bytes_retransmit=9 bytes_invalid=0 send_seq=1188132 receive_seq=1188132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=7809 freq=400007873 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=122115 bytes_read=378020 bytes_retransmit=0 bytes_invalid=0 send_seq=20328 receive_seq=20328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002149 adj=50001465 sd_pos=3676569 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.39 cputime=5927.569 memavail=3264568 print_time=19962.196 buffer_time=2.102 print_stall=0 extruder: target=210 temp=210.8 pwm=0.224
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65928.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62425993 bytes_read=9621224 bytes_retransmit=9 bytes_invalid=0 send_seq=1188334 receive_seq=1188334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=952 freq=400007855 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=122121 bytes_read=378036 bytes_retransmit=0 bytes_invalid=0 send_seq=20329 receive_seq=20329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002154 adj=50001554 sd_pos=3677025 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.36 cputime=5927.782 memavail=3263856 print_time=19963.191 buffer_time=2.096 print_stall=0 extruder: target=210 temp=211.1 pwm=0.224
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65929.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62431686 bytes_read=9621971 bytes_retransmit=9 bytes_invalid=0 send_seq=1188440 receive_seq=1188440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=629 freq=400007848 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122127 bytes_read=378065 bytes_retransmit=0 bytes_invalid=0 send_seq=20330 receive_seq=20330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002164 adj=50001647 sd_pos=3677244 heater_bed: target=60 temp=60.0 pwm=0.041 sysload=0.36 cputime=5928.073 memavail=3262108 print_time=19964.304 buffer_time=2.178 print_stall=0 extruder: target=210 temp=211.2 pwm=0.224
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65930.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62435865 bytes_read=9622577 bytes_retransmit=9 bytes_invalid=0 send_seq=1188518 receive_seq=1188518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=3056 freq=400007829 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122133 bytes_read=378081 bytes_retransmit=0 bytes_invalid=0 send_seq=20331 receive_seq=20331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002170 adj=50001665 sd_pos=3679286 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.36 cputime=5928.231 memavail=3261856 print_time=19965.516 buffer_time=2.390 print_stall=0 extruder: target=210 temp=211.2 pwm=0.224
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65931.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62440687 bytes_read=9623229 bytes_retransmit=9 bytes_invalid=0 send_seq=1188608 receive_seq=1188608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=4760 freq=400007816 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122139 bytes_read=378097 bytes_retransmit=0 bytes_invalid=0 send_seq=20332 receive_seq=20332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002172 adj=50001616 sd_pos=3680944 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.36 cputime=5928.342 memavail=3261860 print_time=19966.487 buffer_time=2.361 print_stall=0 extruder: target=210 temp=211.0 pwm=0.295
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65932.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62445836 bytes_read=9623947 bytes_retransmit=9 bytes_invalid=0 send_seq=1188705 receive_seq=1188705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=9179 freq=400007788 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122145 bytes_read=378113 bytes_retransmit=0 bytes_invalid=0 send_seq=20333 receive_seq=20333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002176 adj=50001599 sd_pos=3682621 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.36 cputime=5928.440 memavail=3266068 print_time=19967.524 buffer_time=2.397 print_stall=0 extruder: target=210 temp=210.7 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65933.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62453255 bytes_read=9624838 bytes_retransmit=9 bytes_invalid=0 send_seq=1188840 receive_seq=1188840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=19056 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122151 bytes_read=378129 bytes_retransmit=0 bytes_invalid=0 send_seq=20334 receive_seq=20334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002179 adj=50001602 sd_pos=3685070 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.33 cputime=5928.541 memavail=3266068 print_time=19969.061 buffer_time=2.933 print_stall=0 extruder: target=210 temp=210.1 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65934.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62461388 bytes_read=9625765 bytes_retransmit=9 bytes_invalid=0 send_seq=1188985 receive_seq=1188985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=22546 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=122157 bytes_read=378158 bytes_retransmit=0 bytes_invalid=0 send_seq=20335 receive_seq=20335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002182 adj=50001490 sd_pos=3689410 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.33 cputime=5928.642 memavail=3266068 print_time=19970.141 buffer_time=3.013 print_stall=0 extruder: target=210 temp=209.5 pwm=0.516
Stats 65935.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62473125 bytes_read=9627016 bytes_retransmit=9 bytes_invalid=0 send_seq=1189189 receive_seq=1189189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=12011 freq=400007773 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=122163 bytes_read=378174 bytes_retransmit=0 bytes_invalid=0 send_seq=20336 receive_seq=20336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002191 adj=50001462 sd_pos=3689410 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.33 cputime=5928.727 memavail=3265816 print_time=19970.141 buffer_time=2.012 print_stall=0 extruder: target=210 temp=208.9 pwm=0.516
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65936.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62484951 bytes_read=9628243 bytes_retransmit=9 bytes_invalid=0 send_seq=1189394 receive_seq=1189394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=10418 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=122169 bytes_read=378190 bytes_retransmit=0 bytes_invalid=0 send_seq=20337 receive_seq=20337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002195 adj=50001551 sd_pos=3693984 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.33 cputime=5928.929 memavail=3265328 print_time=19971.322 buffer_time=2.192 print_stall=0 extruder: target=210 temp=208.6 pwm=0.516
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65937.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62495714 bytes_read=9629396 bytes_retransmit=9 bytes_invalid=0 send_seq=1189581 receive_seq=1189581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=6308 freq=400007739 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=122175 bytes_read=378206 bytes_retransmit=0 bytes_invalid=0 send_seq=20338 receive_seq=20338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002198 adj=50001625 sd_pos=3695816 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.33 cputime=5929.108 memavail=3265328 print_time=19972.301 buffer_time=2.171 print_stall=0 extruder: target=210 temp=208.5 pwm=0.516
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65938.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62504189 bytes_read=9630392 bytes_retransmit=9 bytes_invalid=0 send_seq=1189734 receive_seq=1189734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=8026 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=122181 bytes_read=378222 bytes_retransmit=0 bytes_invalid=0 send_seq=20339 receive_seq=20339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002198 adj=50001670 sd_pos=3699533 heater_bed: target=60 temp=60.0 pwm=0.070 sysload=0.31 cputime=5929.210 memavail=3264860 print_time=19973.324 buffer_time=2.193 print_stall=0 extruder: target=210 temp=208.8 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65939.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62511383 bytes_read=9631239 bytes_retransmit=9 bytes_invalid=0 send_seq=1189864 receive_seq=1189864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=10714 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=122187 bytes_read=378251 bytes_retransmit=0 bytes_invalid=0 send_seq=20340 receive_seq=20340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002201 adj=50001623 sd_pos=3703320 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.31 cputime=5929.301 memavail=3264860 print_time=19974.287 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.1 pwm=0.376
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65940.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62520649 bytes_read=9632261 bytes_retransmit=9 bytes_invalid=0 send_seq=1190028 receive_seq=1190028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14125 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=122193 bytes_read=378267 bytes_retransmit=0 bytes_invalid=0 send_seq=20341 receive_seq=20341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002202 adj=50001617 sd_pos=3708125 heater_bed: target=60 temp=60.0 pwm=0.028 sysload=0.31 cputime=5929.401 memavail=3264864 print_time=19975.443 buffer_time=2.311 print_stall=0 extruder: target=210 temp=209.6 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65941.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62530992 bytes_read=9633402 bytes_retransmit=9 bytes_invalid=0 send_seq=1190210 receive_seq=1190210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=14297 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=122199 bytes_read=378283 bytes_retransmit=0 bytes_invalid=0 send_seq=20342 receive_seq=20342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002204 adj=50001566 sd_pos=3710689 heater_bed: target=60 temp=60.0 pwm=0.303 sysload=0.31 cputime=5929.502 memavail=3264864 print_time=19976.413 buffer_time=2.280 print_stall=0 extruder: target=210 temp=210.2 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65942.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62543016 bytes_read=9634670 bytes_retransmit=9 bytes_invalid=0 send_seq=1190420 receive_seq=1190420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=7605 freq=400007724 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=122205 bytes_read=378299 bytes_retransmit=0 bytes_invalid=0 send_seq=20343 receive_seq=20343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001484 sd_pos=3711018 heater_bed: target=60 temp=60.0 pwm=0.227 sysload=0.31 cputime=5929.701 memavail=3264864 print_time=19977.164 buffer_time=2.031 print_stall=0 extruder: target=210 temp=210.6 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65943.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62552846 bytes_read=9635737 bytes_retransmit=9 bytes_invalid=0 send_seq=1190593 receive_seq=1190593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3074 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=122211 bytes_read=378315 bytes_retransmit=0 bytes_invalid=0 send_seq=20344 receive_seq=20344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001620 sd_pos=3711494 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.36 cputime=5929.946 memavail=3264864 print_time=19978.371 buffer_time=2.237 print_stall=0 extruder: target=210 temp=210.8 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65944.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62560278 bytes_read=9636638 bytes_retransmit=9 bytes_invalid=0 send_seq=1190727 receive_seq=1190727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1054 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122217 bytes_read=378344 bytes_retransmit=0 bytes_invalid=0 send_seq=20345 receive_seq=20345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001500 sd_pos=3711836 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.36 cputime=5930.133 memavail=3264864 print_time=19979.296 buffer_time=2.162 print_stall=0 extruder: target=210 temp=211.1 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65945.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62564217 bytes_read=9637225 bytes_retransmit=9 bytes_invalid=0 send_seq=1190804 receive_seq=1190804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=702 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122223 bytes_read=378360 bytes_retransmit=0 bytes_invalid=0 send_seq=20346 receive_seq=20346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001489 sd_pos=3712064 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.36 cputime=5930.301 memavail=3264868 print_time=19980.232 buffer_time=2.097 print_stall=0 extruder: target=210 temp=211.1 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65946.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62569703 bytes_read=9637937 bytes_retransmit=9 bytes_invalid=0 send_seq=1190906 receive_seq=1190906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2480 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122229 bytes_read=378376 bytes_retransmit=0 bytes_invalid=0 send_seq=20347 receive_seq=20347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001493 sd_pos=3714490 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.36 cputime=5930.386 memavail=3264868 print_time=19981.181 buffer_time=2.045 print_stall=0 extruder: target=210 temp=211.1 pwm=0.256
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65947.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62573811 bytes_read=9638584 bytes_retransmit=9 bytes_invalid=0 send_seq=1190986 receive_seq=1190986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=11607 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122235 bytes_read=378392 bytes_retransmit=0 bytes_invalid=0 send_seq=20348 receive_seq=20348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002219 adj=50001478 sd_pos=3719219 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.36 cputime=5930.592 memavail=3264868 print_time=19982.851 buffer_time=2.715 print_stall=0 extruder: target=210 temp=210.7 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65948.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62581687 bytes_read=9639496 bytes_retransmit=9 bytes_invalid=0 send_seq=1191128 receive_seq=1191128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=18051 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122241 bytes_read=378408 bytes_retransmit=0 bytes_invalid=0 send_seq=20349 receive_seq=20349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002220 adj=50001422 sd_pos=3721357 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.33 cputime=5930.691 memavail=3264512 print_time=19984.069 buffer_time=2.932 print_stall=0 extruder: target=210 temp=210.3 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65949.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62588384 bytes_read=9640302 bytes_retransmit=9 bytes_invalid=0 send_seq=1191249 receive_seq=1191249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=17785 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122247 bytes_read=378437 bytes_retransmit=0 bytes_invalid=0 send_seq=20350 receive_seq=20350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002221 adj=50001378 sd_pos=3725192 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.33 cputime=5930.774 memavail=3264620 print_time=19984.817 buffer_time=2.680 print_stall=0 extruder: target=210 temp=209.9 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65950.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62600292 bytes_read=9641568 bytes_retransmit=9 bytes_invalid=0 send_seq=1191457 receive_seq=1191457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=16702 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122253 bytes_read=378453 bytes_retransmit=0 bytes_invalid=0 send_seq=20351 receive_seq=20351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002220 adj=50001405 sd_pos=3730249 heater_bed: target=60 temp=60.0 pwm=0.271 sysload=0.33 cputime=5930.874 memavail=3264620 print_time=19985.849 buffer_time=2.711 print_stall=0 extruder: target=210 temp=209.2 pwm=0.488
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65951.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62611821 bytes_read=9642720 bytes_retransmit=9 bytes_invalid=0 send_seq=1191647 receive_seq=1191647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=8241 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122259 bytes_read=378469 bytes_retransmit=0 bytes_invalid=0 send_seq=20352 receive_seq=20352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002221 adj=50001397 sd_pos=3730713 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.33 cputime=5930.933 memavail=3264620 print_time=19986.169 buffer_time=2.031 print_stall=0 extruder: target=210 temp=208.9 pwm=0.539
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65952.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62620585 bytes_read=9643713 bytes_retransmit=9 bytes_invalid=0 send_seq=1191802 receive_seq=1191802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=7330 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122265 bytes_read=378485 bytes_retransmit=0 bytes_invalid=0 send_seq=20353 receive_seq=20353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002219 adj=50001414 sd_pos=3733190 heater_bed: target=60 temp=60.0 pwm=0.275 sysload=0.33 cputime=5931.039 memavail=3264620 print_time=19987.185 buffer_time=2.045 print_stall=0 extruder: target=210 temp=208.8 pwm=0.539
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65953.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62630313 bytes_read=9644804 bytes_retransmit=9 bytes_invalid=0 send_seq=1191974 receive_seq=1191974 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=10505 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122271 bytes_read=378501 bytes_retransmit=0 bytes_invalid=0 send_seq=20354 receive_seq=20354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002220 adj=50001381 sd_pos=3735283 heater_bed: target=60 temp=60.0 pwm=0.287 sysload=0.31 cputime=5931.242 memavail=3264620 print_time=19988.739 buffer_time=2.599 print_stall=0 extruder: target=210 temp=208.8 pwm=0.475
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65954.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62637922 bytes_read=9645636 bytes_retransmit=9 bytes_invalid=0 send_seq=1192100 receive_seq=1192100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=12453 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122277 bytes_read=378530 bytes_retransmit=0 bytes_invalid=0 send_seq=20355 receive_seq=20355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002219 adj=50001361 sd_pos=3739234 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.31 cputime=5931.337 memavail=3264620 print_time=19989.619 buffer_time=2.478 print_stall=0 extruder: target=210 temp=209.1 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65955.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62645145 bytes_read=9646498 bytes_retransmit=9 bytes_invalid=0 send_seq=1192232 receive_seq=1192232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=13229 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122283 bytes_read=378546 bytes_retransmit=0 bytes_invalid=0 send_seq=20356 receive_seq=20356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002217 adj=50001340 sd_pos=3744021 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.31 cputime=5931.427 memavail=3264620 print_time=19990.388 buffer_time=2.246 print_stall=0 extruder: target=210 temp=209.6 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65956.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62657163 bytes_read=9647729 bytes_retransmit=9 bytes_invalid=0 send_seq=1192432 receive_seq=1192432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=9827 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122289 bytes_read=378562 bytes_retransmit=0 bytes_invalid=0 send_seq=20357 receive_seq=20357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001331 sd_pos=3748184 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.31 cputime=5931.540 memavail=3264620 print_time=19991.310 buffer_time=2.167 print_stall=0 extruder: target=210 temp=210.2 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65957.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62666792 bytes_read=9648792 bytes_retransmit=9 bytes_invalid=0 send_seq=1192601 receive_seq=1192601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=7262 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122295 bytes_read=378578 bytes_retransmit=0 bytes_invalid=0 send_seq=20358 receive_seq=20358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002214 adj=50001326 sd_pos=3749570 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.31 cputime=5931.721 memavail=3264620 print_time=19992.297 buffer_time=2.153 print_stall=0 extruder: target=210 temp=210.6 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65958.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62675930 bytes_read=9649789 bytes_retransmit=9 bytes_invalid=0 send_seq=1192760 receive_seq=1192760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=4363 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122301 bytes_read=378594 bytes_retransmit=0 bytes_invalid=0 send_seq=20359 receive_seq=20359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002213 adj=50001298 sd_pos=3750114 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.28 cputime=5932.020 memavail=3264116 print_time=19993.511 buffer_time=2.366 print_stall=0 extruder: target=210 temp=211.0 pwm=0.244
Stats 65959.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62683115 bytes_read=9650665 bytes_retransmit=9 bytes_invalid=0 send_seq=1192889 receive_seq=1192889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1661 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122307 bytes_read=378623 bytes_retransmit=0 bytes_invalid=0 send_seq=20360 receive_seq=20360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001280 sd_pos=3750333 heater_bed: target=60 temp=60.0 pwm=0.295 sysload=0.28 cputime=5932.212 memavail=3264132 print_time=19994.386 buffer_time=2.241 print_stall=0 extruder: target=210 temp=211.3 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65960.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62687167 bytes_read=9651258 bytes_retransmit=9 bytes_invalid=0 send_seq=1192968 receive_seq=1192968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1237 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122313 bytes_read=378639 bytes_retransmit=0 bytes_invalid=0 send_seq=20361 receive_seq=20361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001338 sd_pos=3750567 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.28 cputime=5932.371 memavail=3264132 print_time=19995.219 buffer_time=2.074 print_stall=0 extruder: target=210 temp=211.3 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65961.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62693084 bytes_read=9651998 bytes_retransmit=9 bytes_invalid=0 send_seq=1193076 receive_seq=1193076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2909 freq=400007566 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122319 bytes_read=378655 bytes_retransmit=0 bytes_invalid=0 send_seq=20362 receive_seq=20362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002214 adj=50001345 sd_pos=3753079 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.28 cputime=5932.462 memavail=3264132 print_time=19996.163 buffer_time=2.016 print_stall=0 extruder: target=210 temp=211.2 pwm=0.262
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65962.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62697401 bytes_read=9652650 bytes_retransmit=9 bytes_invalid=0 send_seq=1193157 receive_seq=1193157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=8874 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122325 bytes_read=378671 bytes_retransmit=0 bytes_invalid=0 send_seq=20363 receive_seq=20363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002216 adj=50001319 sd_pos=3758549 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.28 cputime=5932.600 memavail=3264132 print_time=19997.609 buffer_time=2.461 print_stall=0 extruder: target=210 temp=210.8 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65963.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62705640 bytes_read=9653592 bytes_retransmit=9 bytes_invalid=0 send_seq=1193305 receive_seq=1193305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=8600 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122331 bytes_read=378687 bytes_retransmit=0 bytes_invalid=0 send_seq=20364 receive_seq=20364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002215 adj=50001294 sd_pos=3762105 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.26 cputime=5932.757 memavail=3263880 print_time=19998.414 buffer_time=2.265 print_stall=0 extruder: target=210 temp=210.3 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65964.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62712720 bytes_read=9654409 bytes_retransmit=9 bytes_invalid=0 send_seq=1193425 receive_seq=1193425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=20601 freq=400007568 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122337 bytes_read=378716 bytes_retransmit=0 bytes_invalid=0 send_seq=20365 receive_seq=20365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002213 adj=50001296 sd_pos=3769754 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.26 cputime=5932.917 memavail=3263880 print_time=20000.346 buffer_time=3.190 print_stall=0 extruder: target=210 temp=209.9 pwm=0.458
Stats 65965.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62722520 bytes_read=9655506 bytes_retransmit=9 bytes_invalid=0 send_seq=1193599 receive_seq=1193599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11846 freq=400007560 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122349 bytes_read=378748 bytes_retransmit=0 bytes_invalid=0 send_seq=20367 receive_seq=20367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002207 adj=50001264 sd_pos=3769754 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.26 cputime=5932.964 memavail=3263376 print_time=20000.346 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.3 pwm=0.510
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65966.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62731826 bytes_read=9656538 bytes_retransmit=9 bytes_invalid=0 send_seq=1193765 receive_seq=1193765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=11075 freq=400007550 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122355 bytes_read=378764 bytes_retransmit=0 bytes_invalid=0 send_seq=20368 receive_seq=20368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002205 adj=50001223 sd_pos=3772151 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.26 cputime=5933.070 memavail=3263124 print_time=20001.398 buffer_time=2.242 print_stall=0 extruder: target=210 temp=209.0 pwm=0.510
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65967.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62742798 bytes_read=9657726 bytes_retransmit=9 bytes_invalid=0 send_seq=1193956 receive_seq=1193956 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=13853 freq=400007550 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122361 bytes_read=378780 bytes_retransmit=0 bytes_invalid=0 send_seq=20369 receive_seq=20369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002203 adj=50001218 sd_pos=3776207 heater_bed: target=60 temp=60.0 pwm=0.282 sysload=0.26 cputime=5933.211 memavail=3263136 print_time=20003.121 buffer_time=2.964 print_stall=0 extruder: target=210 temp=208.8 pwm=0.510
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65968.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62752080 bytes_read=9658762 bytes_retransmit=9 bytes_invalid=0 send_seq=1194120 receive_seq=1194120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=13341 freq=400007564 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122367 bytes_read=378796 bytes_retransmit=0 bytes_invalid=0 send_seq=20370 receive_seq=20370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002208 adj=50001213 sd_pos=3781830 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.32 cputime=5933.374 memavail=3262888 print_time=20004.070 buffer_time=2.843 print_stall=0 extruder: target=210 temp=208.8 pwm=0.447
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65969.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62758445 bytes_read=9659549 bytes_retransmit=9 bytes_invalid=0 send_seq=1194237 receive_seq=1194237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=14190 freq=400007567 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122373 bytes_read=378825 bytes_retransmit=0 bytes_invalid=0 send_seq=20371 receive_seq=20371 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002208 adj=50001248 sd_pos=3784951 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.32 cputime=5933.450 memavail=3267048 print_time=20004.813 buffer_time=2.586 print_stall=0 extruder: target=210 temp=209.1 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65970.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62768784 bytes_read=9660695 bytes_retransmit=9 bytes_invalid=0 send_seq=1194420 receive_seq=1194420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=15408 freq=400007569 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122379 bytes_read=378841 bytes_retransmit=0 bytes_invalid=0 send_seq=20372 receive_seq=20372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002205 adj=50001239 sd_pos=3787455 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.32 cputime=5933.534 memavail=3267048 print_time=20005.865 buffer_time=2.636 print_stall=0 extruder: target=210 temp=209.6 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65971.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62778911 bytes_read=9661803 bytes_retransmit=9 bytes_invalid=0 send_seq=1194599 receive_seq=1194599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=9841 freq=400007562 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122385 bytes_read=378857 bytes_retransmit=0 bytes_invalid=0 send_seq=20373 receive_seq=20373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002202 adj=50001210 sd_pos=3787689 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.32 cputime=5933.669 memavail=3267048 print_time=20006.538 buffer_time=2.263 print_stall=0 extruder: target=210 temp=210.0 pwm=0.306
Stats 65972.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62788888 bytes_read=9662895 bytes_retransmit=9 bytes_invalid=0 send_seq=1194774 receive_seq=1194774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3683 freq=400007571 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122391 bytes_read=378873 bytes_retransmit=0 bytes_invalid=0 send_seq=20374 receive_seq=20374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002202 adj=50001194 sd_pos=3787908 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.32 cputime=5933.865 memavail=3265284 print_time=20007.345 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.4 pwm=0.243
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65973.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62797876 bytes_read=9663911 bytes_retransmit=9 bytes_invalid=0 send_seq=1194934 receive_seq=1194934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=709 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122397 bytes_read=378889 bytes_retransmit=0 bytes_invalid=0 send_seq=20375 receive_seq=20375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002197 adj=50001181 sd_pos=3788362 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.29 cputime=5934.083 memavail=3265284 print_time=20008.454 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.9 pwm=0.243
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65974.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62801883 bytes_read=9664503 bytes_retransmit=9 bytes_invalid=0 send_seq=1195012 receive_seq=1195012 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1644 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122403 bytes_read=378918 bytes_retransmit=0 bytes_invalid=0 send_seq=20376 receive_seq=20376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002193 adj=50001056 sd_pos=3788839 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.29 cputime=5934.318 memavail=3264528 print_time=20009.711 buffer_time=2.416 print_stall=0 extruder: target=210 temp=211.1 pwm=0.243
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65975.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62807016 bytes_read=9665205 bytes_retransmit=9 bytes_invalid=0 send_seq=1195109 receive_seq=1195109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=3151 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122409 bytes_read=378934 bytes_retransmit=0 bytes_invalid=0 send_seq=20377 receive_seq=20377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002189 adj=50001036 sd_pos=3791070 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.29 cputime=5934.400 memavail=3264528 print_time=20010.578 buffer_time=2.282 print_stall=0 extruder: target=210 temp=211.1 pwm=0.243
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65976.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62810918 bytes_read=9665812 bytes_retransmit=9 bytes_invalid=0 send_seq=1195184 receive_seq=1195184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=12516 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122415 bytes_read=378950 bytes_retransmit=0 bytes_invalid=0 send_seq=20378 receive_seq=20378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002188 adj=50001010 sd_pos=3796455 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.29 cputime=5934.529 memavail=3264528 print_time=20012.300 buffer_time=3.004 print_stall=0 extruder: target=210 temp=210.9 pwm=0.320
Stats 65977.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62817875 bytes_read=9666649 bytes_retransmit=9 bytes_invalid=0 send_seq=1195311 receive_seq=1195311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=6364 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122421 bytes_read=378966 bytes_retransmit=0 bytes_invalid=0 send_seq=20379 receive_seq=20379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002185 adj=50001114 sd_pos=3796455 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.29 cputime=5934.566 memavail=3265284 print_time=20012.300 buffer_time=2.003 print_stall=0 extruder: target=210 temp=210.7 pwm=0.320
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65978.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62824198 bytes_read=9667441 bytes_retransmit=9 bytes_invalid=0 send_seq=1195426 receive_seq=1195426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=13586 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122427 bytes_read=378982 bytes_retransmit=0 bytes_invalid=0 send_seq=20380 receive_seq=20380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002181 adj=50001106 sd_pos=3803770 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.27 cputime=5934.704 memavail=3268164 print_time=20013.821 buffer_time=2.524 print_stall=0 extruder: target=210 temp=210.3 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65979.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62834943 bytes_read=9668602 bytes_retransmit=9 bytes_invalid=0 send_seq=1195615 receive_seq=1195615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=16316 freq=400007730 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122433 bytes_read=379011 bytes_retransmit=0 bytes_invalid=0 send_seq=20381 receive_seq=20381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002178 adj=50000904 sd_pos=3807217 heater_bed: target=60 temp=60.0 pwm=0.053 sysload=0.27 cputime=5934.868 memavail=3267680 print_time=20015.116 buffer_time=2.818 print_stall=0 extruder: target=210 temp=209.6 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65980.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62844738 bytes_read=9669669 bytes_retransmit=9 bytes_invalid=0 send_seq=1195788 receive_seq=1195788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=9894 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122439 bytes_read=379026 bytes_retransmit=0 bytes_invalid=0 send_seq=20382 receive_seq=20382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002175 adj=50000986 sd_pos=3807742 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.27 cputime=5934.928 memavail=3267680 print_time=20015.468 buffer_time=2.169 print_stall=0 extruder: target=210 temp=209.1 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65981.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62854077 bytes_read=9670726 bytes_retransmit=9 bytes_invalid=0 send_seq=1195953 receive_seq=1195953 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=8470 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122445 bytes_read=379041 bytes_retransmit=0 bytes_invalid=0 send_seq=20383 receive_seq=20383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002173 adj=50000964 sd_pos=3810014 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.27 cputime=5935.019 memavail=3267680 print_time=20016.489 buffer_time=2.189 print_stall=0 extruder: target=210 temp=208.8 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65982.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62864439 bytes_read=9671848 bytes_retransmit=9 bytes_invalid=0 send_seq=1196135 receive_seq=1196135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=9806 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122451 bytes_read=379056 bytes_retransmit=0 bytes_invalid=0 send_seq=20384 receive_seq=20384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002170 adj=50000957 sd_pos=3815021 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.27 cputime=5935.155 memavail=3267680 print_time=20018.116 buffer_time=2.816 print_stall=0 extruder: target=210 temp=208.7 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65983.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62871539 bytes_read=9672650 bytes_retransmit=9 bytes_invalid=0 send_seq=1196255 receive_seq=1196255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=9250 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122457 bytes_read=379071 bytes_retransmit=0 bytes_invalid=0 send_seq=20385 receive_seq=20385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002167 adj=50001057 sd_pos=3818505 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.25 cputime=5935.238 memavail=3267460 print_time=20018.863 buffer_time=2.563 print_stall=0 extruder: target=210 temp=208.8 pwm=0.465
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65984.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62878106 bytes_read=9673462 bytes_retransmit=9 bytes_invalid=0 send_seq=1196374 receive_seq=1196374 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=7962 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122463 bytes_read=379099 bytes_retransmit=0 bytes_invalid=0 send_seq=20386 receive_seq=20386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002167 adj=50001059 sd_pos=3820314 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.25 cputime=5935.329 memavail=3267460 print_time=20019.485 buffer_time=2.184 print_stall=0 extruder: target=210 temp=209.1 pwm=0.410
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65985.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=62886935 bytes_read=9674463 bytes_retransmit=9 bytes_invalid=0 send_seq=1196531 receive_seq=1196531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4512 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122469 bytes_read=379114 bytes_retransmit=0 bytes_invalid=0 send_seq=20387 receive_seq=20387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002165 adj=50001074 sd_pos=3820600 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.25 cputime=5935.556 memavail=3267460 print_time=20020.406 buffer_time=2.105 print_stall=0 extruder: target=210 temp=209.7 pwm=0.326
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65986.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62894823 bytes_read=9675391 bytes_retransmit=9 bytes_invalid=0 send_seq=1196673 receive_seq=1196673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=1146 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122475 bytes_read=379130 bytes_retransmit=0 bytes_invalid=0 send_seq=20388 receive_seq=20388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002162 adj=50001053 sd_pos=3821158 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.25 cputime=5935.746 memavail=3267460 print_time=20021.394 buffer_time=2.091 print_stall=0 extruder: target=210 temp=210.3 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65987.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62900435 bytes_read=9676128 bytes_retransmit=9 bytes_invalid=0 send_seq=1196777 receive_seq=1196777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=432 freq=400007768 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122481 bytes_read=379146 bytes_retransmit=0 bytes_invalid=0 send_seq=20389 receive_seq=20389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002160 adj=50000889 sd_pos=3821413 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.25 cputime=5935.919 memavail=3265700 print_time=20022.317 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.6 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65988.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62904724 bytes_read=9676714 bytes_retransmit=9 bytes_invalid=0 send_seq=1196851 receive_seq=1196851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3555 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122487 bytes_read=379162 bytes_retransmit=0 bytes_invalid=0 send_seq=20390 receive_seq=20390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002160 adj=50000896 sd_pos=3822997 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.23 cputime=5936.119 memavail=3264216 print_time=20023.793 buffer_time=2.488 print_stall=0 extruder: target=210 temp=211.1 pwm=0.200
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65989.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62909884 bytes_read=9677391 bytes_retransmit=9 bytes_invalid=0 send_seq=1196946 receive_seq=1196946 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=2932 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122493 bytes_read=379178 bytes_retransmit=0 bytes_invalid=0 send_seq=20391 receive_seq=20391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002156 adj=50001027 sd_pos=3824239 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.23 cputime=5936.181 memavail=3264216 print_time=20024.423 buffer_time=2.118 print_stall=0 extruder: target=210 temp=211.2 pwm=0.200
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65990.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62914492 bytes_read=9678053 bytes_retransmit=9 bytes_invalid=0 send_seq=1197035 receive_seq=1197035 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=5794 freq=400007884 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122499 bytes_read=379207 bytes_retransmit=0 bytes_invalid=0 send_seq=20392 receive_seq=20392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002153 adj=50001007 sd_pos=3826333 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.23 cputime=5936.346 memavail=3264220 print_time=20025.598 buffer_time=2.292 print_stall=0 extruder: target=210 temp=211.1 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65991.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62922006 bytes_read=9678955 bytes_retransmit=9 bytes_invalid=0 send_seq=1197169 receive_seq=1197169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=12926 freq=400007851 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122505 bytes_read=379223 bytes_retransmit=0 bytes_invalid=0 send_seq=20393 receive_seq=20393 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002149 adj=50000814 sd_pos=3833656 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.23 cputime=5936.475 memavail=3269124 print_time=20027.299 buffer_time=2.969 print_stall=0 extruder: target=210 temp=210.7 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 65992.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62928438 bytes_read=9679689 bytes_retransmit=9 bytes_invalid=0 send_seq=1197276 receive_seq=1197276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=9200 freq=400007831 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122511 bytes_read=379239 bytes_retransmit=0 bytes_invalid=0 send_seq=20394 receive_seq=20394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002144 adj=50000974 sd_pos=3834966 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.23 cputime=5936.531 memavail=3269156 print_time=20027.570 buffer_time=2.239 print_stall=0 extruder: target=210 temp=210.3 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65993.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62936777 bytes_read=9680648 bytes_retransmit=9 bytes_invalid=0 send_seq=1197422 receive_seq=1197422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=8327 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122517 bytes_read=379255 bytes_retransmit=0 bytes_invalid=0 send_seq=20395 receive_seq=20395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002139 adj=50000953 sd_pos=3836626 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.21 cputime=5936.599 memavail=3269156 print_time=20028.470 buffer_time=2.139 print_stall=0 extruder: target=210 temp=209.6 pwm=0.477
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65994.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62946208 bytes_read=9681680 bytes_retransmit=9 bytes_invalid=0 send_seq=1197588 receive_seq=1197588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=7732 freq=400007791 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122523 bytes_read=379271 bytes_retransmit=0 bytes_invalid=0 send_seq=20396 receive_seq=20396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002134 adj=50000940 sd_pos=3838580 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.21 cputime=5936.719 memavail=3269156 print_time=20029.735 buffer_time=2.402 print_stall=0 extruder: target=210 temp=209.2 pwm=0.477
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65995.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=62954491 bytes_read=9682617 bytes_retransmit=9 bytes_invalid=0 send_seq=1197735 receive_seq=1197735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=8299 freq=400007779 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122529 bytes_read=379300 bytes_retransmit=0 bytes_invalid=0 send_seq=20397 receive_seq=20397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002132 adj=50000939 sd_pos=3840619 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.21 cputime=5936.825 memavail=3269156 print_time=20030.784 buffer_time=2.451 print_stall=0 extruder: target=210 temp=208.9 pwm=0.535
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 65996.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62961718 bytes_read=9683509 bytes_retransmit=9 bytes_invalid=0 send_seq=1197864 receive_seq=1197864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=16318 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122535 bytes_read=379316 bytes_retransmit=0 bytes_invalid=0 send_seq=20398 receive_seq=20398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002132 adj=50000970 sd_pos=3842846 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.21 cputime=5936.964 memavail=3269156 print_time=20032.574 buffer_time=3.241 print_stall=0 extruder: target=210 temp=208.8 pwm=0.473
Stats 65997.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62969547 bytes_read=9684411 bytes_retransmit=9 bytes_invalid=0 send_seq=1198004 receive_seq=1198004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=9347 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122541 bytes_read=379332 bytes_retransmit=0 bytes_invalid=0 send_seq=20399 receive_seq=20399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002127 adj=50001060 sd_pos=3842846 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.21 cputime=5937.003 memavail=3269156 print_time=20032.574 buffer_time=2.240 print_stall=0 extruder: target=210 temp=208.9 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 65998.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62978365 bytes_read=9685388 bytes_retransmit=9 bytes_invalid=0 send_seq=1198159 receive_seq=1198159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=8424 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122547 bytes_read=379348 bytes_retransmit=0 bytes_invalid=0 send_seq=20400 receive_seq=20400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002124 adj=50001032 sd_pos=3843957 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.27 cputime=5937.117 memavail=3268664 print_time=20033.508 buffer_time=2.173 print_stall=0 extruder: target=210 temp=209.2 pwm=0.379
Stats 66000.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62987736 bytes_read=9686449 bytes_retransmit=9 bytes_invalid=0 send_seq=1198325 receive_seq=1198325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=3956 freq=400007721 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122553 bytes_read=379377 bytes_retransmit=0 bytes_invalid=0 send_seq=20401 receive_seq=20401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002119 adj=50001021 sd_pos=3844271 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.27 cputime=5937.357 memavail=3268160 print_time=20034.616 buffer_time=2.234 print_stall=0 extruder: target=210 temp=209.9 pwm=0.322
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66001.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=62996099 bytes_read=9687396 bytes_retransmit=9 bytes_invalid=0 send_seq=1198474 receive_seq=1198474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=846 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122559 bytes_read=379393 bytes_retransmit=0 bytes_invalid=0 send_seq=20402 receive_seq=20402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002115 adj=50001004 sd_pos=3844753 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.27 cputime=5937.503 memavail=3268160 print_time=20035.434 buffer_time=2.052 print_stall=0 extruder: target=210 temp=210.3 pwm=0.238
Stats 66002.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63000132 bytes_read=9688009 bytes_retransmit=9 bytes_invalid=0 send_seq=1198550 receive_seq=1198550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=515 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122565 bytes_read=379409 bytes_retransmit=0 bytes_invalid=0 send_seq=20403 receive_seq=20403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002112 adj=50000987 sd_pos=3844843 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.27 cputime=5937.741 memavail=3267152 print_time=20036.427 buffer_time=2.044 print_stall=0 extruder: target=210 temp=210.7 pwm=0.238
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66003.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63005867 bytes_read=9688760 bytes_retransmit=9 bytes_invalid=0 send_seq=1198657 receive_seq=1198657 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=3809 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122571 bytes_read=379425 bytes_retransmit=0 bytes_invalid=0 send_seq=20404 receive_seq=20404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002107 adj=50001009 sd_pos=3846621 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.27 cputime=5937.866 memavail=3266652 print_time=20037.769 buffer_time=2.385 print_stall=0 extruder: target=210 temp=211.2 pwm=0.184
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66004.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63009748 bytes_read=9689337 bytes_retransmit=9 bytes_invalid=0 send_seq=1198733 receive_seq=1198733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=8549 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122577 bytes_read=379441 bytes_retransmit=0 bytes_invalid=0 send_seq=20405 receive_seq=20405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002103 adj=50001041 sd_pos=3848699 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.25 cputime=5937.977 memavail=3266652 print_time=20039.052 buffer_time=2.666 print_stall=0 extruder: target=210 temp=211.3 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66005.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63016566 bytes_read=9690174 bytes_retransmit=9 bytes_invalid=0 send_seq=1198857 receive_seq=1198857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=12294 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122583 bytes_read=379457 bytes_retransmit=0 bytes_invalid=0 send_seq=20406 receive_seq=20406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002098 adj=50001053 sd_pos=3851013 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.25 cputime=5938.059 memavail=3266652 print_time=20040.260 buffer_time=2.875 print_stall=0 extruder: target=210 temp=211.3 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66006.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63024925 bytes_read=9691130 bytes_retransmit=9 bytes_invalid=0 send_seq=1199005 receive_seq=1199005 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=18624 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122589 bytes_read=379486 bytes_retransmit=0 bytes_invalid=0 send_seq=20407 receive_seq=20407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002093 adj=50001035 sd_pos=3853548 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.25 cputime=5938.136 memavail=3266656 print_time=20041.937 buffer_time=3.550 print_stall=0 extruder: target=210 temp=210.9 pwm=0.308
Stats 66007.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63032305 bytes_read=9692008 bytes_retransmit=9 bytes_invalid=0 send_seq=1199137 receive_seq=1199137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12084 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122595 bytes_read=379502 bytes_retransmit=0 bytes_invalid=0 send_seq=20408 receive_seq=20408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002089 adj=50001039 sd_pos=3853548 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.25 cputime=5938.188 memavail=3266656 print_time=20041.937 buffer_time=2.549 print_stall=0 extruder: target=210 temp=210.4 pwm=0.384
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66008.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63041250 bytes_read=9693015 bytes_retransmit=9 bytes_invalid=0 send_seq=1199295 receive_seq=1199295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11851 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122601 bytes_read=379518 bytes_retransmit=0 bytes_invalid=0 send_seq=20409 receive_seq=20409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002087 adj=50001022 sd_pos=3855627 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.25 cputime=5938.337 memavail=3266184 print_time=20042.902 buffer_time=2.514 print_stall=0 extruder: target=210 temp=209.9 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66009.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63050034 bytes_read=9694001 bytes_retransmit=9 bytes_invalid=0 send_seq=1199449 receive_seq=1199449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13839 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122607 bytes_read=379534 bytes_retransmit=0 bytes_invalid=0 send_seq=20410 receive_seq=20410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002082 adj=50000997 sd_pos=3857968 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.23 cputime=5938.428 memavail=3265940 print_time=20044.149 buffer_time=2.760 print_stall=0 extruder: target=210 temp=209.3 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66010.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63059390 bytes_read=9695033 bytes_retransmit=9 bytes_invalid=0 send_seq=1199615 receive_seq=1199615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=15206 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122613 bytes_read=379550 bytes_retransmit=0 bytes_invalid=0 send_seq=20411 receive_seq=20411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002078 adj=50000956 sd_pos=3860102 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.23 cputime=5938.498 memavail=3265940 print_time=20045.332 buffer_time=2.943 print_stall=0 extruder: target=210 temp=209.0 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66011.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63067774 bytes_read=9695950 bytes_retransmit=9 bytes_invalid=0 send_seq=1199755 receive_seq=1199755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=15627 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122619 bytes_read=379579 bytes_retransmit=0 bytes_invalid=0 send_seq=20412 receive_seq=20412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002073 adj=50000965 sd_pos=3861545 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.23 cputime=5938.573 memavail=3265940 print_time=20046.461 buffer_time=3.072 print_stall=0 extruder: target=210 temp=208.9 pwm=0.497
Stats 66012.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63077391 bytes_read=9697027 bytes_retransmit=9 bytes_invalid=0 send_seq=1199924 receive_seq=1199924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=7021 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122625 bytes_read=379595 bytes_retransmit=0 bytes_invalid=0 send_seq=20413 receive_seq=20413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002068 adj=50000883 sd_pos=3861545 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.23 cputime=5938.617 memavail=3265940 print_time=20046.461 buffer_time=2.072 print_stall=0 extruder: target=210 temp=209.0 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66013.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63086511 bytes_read=9698039 bytes_retransmit=9 bytes_invalid=0 send_seq=1200086 receive_seq=1200086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=7699 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122631 bytes_read=379611 bytes_retransmit=0 bytes_invalid=0 send_seq=20414 receive_seq=20414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002065 adj=50000865 sd_pos=3863742 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.23 cputime=5938.703 memavail=3265940 print_time=20047.479 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.3 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66014.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63094322 bytes_read=9698960 bytes_retransmit=9 bytes_invalid=0 send_seq=1200227 receive_seq=1200227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=5450 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122637 bytes_read=379627 bytes_retransmit=0 bytes_invalid=0 send_seq=20415 receive_seq=20415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002064 adj=50000849 sd_pos=3864026 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.29 cputime=5938.943 memavail=3265948 print_time=20048.458 buffer_time=2.067 print_stall=0 extruder: target=210 temp=209.7 pwm=0.312
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66015.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63103563 bytes_read=9699982 bytes_retransmit=9 bytes_invalid=0 send_seq=1200389 receive_seq=1200389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=740 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122643 bytes_read=379643 bytes_retransmit=0 bytes_invalid=0 send_seq=20416 receive_seq=20416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002060 adj=50000837 sd_pos=3864554 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.29 cputime=5939.141 memavail=3265948 print_time=20049.443 buffer_time=2.052 print_stall=0 extruder: target=210 temp=210.3 pwm=0.260
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66016.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63109131 bytes_read=9700694 bytes_retransmit=9 bytes_invalid=0 send_seq=1200491 receive_seq=1200491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=780 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122649 bytes_read=379672 bytes_retransmit=0 bytes_invalid=0 send_seq=20417 receive_seq=20417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002056 adj=50000823 sd_pos=3864808 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.29 cputime=5939.360 memavail=3264688 print_time=20050.616 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.8 pwm=0.260
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66017.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63113465 bytes_read=9701347 bytes_retransmit=9 bytes_invalid=0 send_seq=1200575 receive_seq=1200575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=7073 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122655 bytes_read=379688 bytes_retransmit=0 bytes_invalid=0 send_seq=20418 receive_seq=20418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002052 adj=50000846 sd_pos=3866975 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.29 cputime=5939.540 memavail=3264688 print_time=20052.359 buffer_time=2.949 print_stall=0 extruder: target=210 temp=211.1 pwm=0.191
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66018.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63118521 bytes_read=9702038 bytes_retransmit=9 bytes_invalid=0 send_seq=1200670 receive_seq=1200670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=15818 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122661 bytes_read=379704 bytes_retransmit=0 bytes_invalid=0 send_seq=20419 receive_seq=20419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002049 adj=50000954 sd_pos=3869671 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.29 cputime=5939.617 memavail=3264688 print_time=20053.813 buffer_time=3.402 print_stall=0 extruder: target=210 temp=211.2 pwm=0.191
Stats 66019.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63123628 bytes_read=9702720 bytes_retransmit=9 bytes_invalid=0 send_seq=1200766 receive_seq=1200766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=11385 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122667 bytes_read=379720 bytes_retransmit=0 bytes_invalid=0 send_seq=20420 receive_seq=20420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002047 adj=50000977 sd_pos=3869671 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.27 cputime=5939.674 memavail=3263684 print_time=20053.813 buffer_time=2.402 print_stall=0 extruder: target=210 temp=211.3 pwm=0.245
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66020.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63132029 bytes_read=9703632 bytes_retransmit=9 bytes_invalid=0 send_seq=1200905 receive_seq=1200905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=11167 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=122673 bytes_read=379736 bytes_retransmit=0 bytes_invalid=0 send_seq=20421 receive_seq=20421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002053 adj=50000970 sd_pos=3871382 heater_bed: target=60 temp=60.0 pwm=0.047 sysload=0.27 cputime=5939.805 memavail=3268312 print_time=20054.812 buffer_time=2.400 print_stall=0 extruder: target=210 temp=210.9 pwm=0.308
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66021.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63142357 bytes_read=9704743 bytes_retransmit=9 bytes_invalid=0 send_seq=1201084 receive_seq=1201084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=15515 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122679 bytes_read=379765 bytes_retransmit=0 bytes_invalid=0 send_seq=20422 receive_seq=20422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002048 adj=50000975 sd_pos=3874795 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.27 cputime=5939.890 memavail=3268312 print_time=20056.323 buffer_time=2.910 print_stall=0 extruder: target=210 temp=210.4 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66022.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63151386 bytes_read=9705761 bytes_retransmit=9 bytes_invalid=0 send_seq=1201244 receive_seq=1201244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=21198 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122685 bytes_read=379781 bytes_retransmit=0 bytes_invalid=0 send_seq=20423 receive_seq=20423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002043 adj=50000957 sd_pos=3877734 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.27 cputime=5939.985 memavail=3268312 print_time=20058.064 buffer_time=3.651 print_stall=0 extruder: target=210 temp=209.8 pwm=0.442
Stats 66023.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63160764 bytes_read=9706813 bytes_retransmit=9 bytes_invalid=0 send_seq=1201411 receive_seq=1201411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=12843 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122691 bytes_read=379797 bytes_retransmit=0 bytes_invalid=0 send_seq=20424 receive_seq=20424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002039 adj=50000983 sd_pos=3877734 heater_bed: target=60 temp=60.0 pwm=0.196 sysload=0.27 cputime=5940.029 memavail=3268312 print_time=20058.064 buffer_time=2.650 print_stall=0 extruder: target=210 temp=209.4 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66024.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63170081 bytes_read=9707865 bytes_retransmit=9 bytes_invalid=0 send_seq=1201576 receive_seq=1201576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=12148 freq=400007879 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122703 bytes_read=379829 bytes_retransmit=0 bytes_invalid=0 send_seq=20426 receive_seq=20426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002029 adj=50000966 sd_pos=3879471 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.25 cputime=5940.102 memavail=3268312 print_time=20059.066 buffer_time=2.652 print_stall=0 extruder: target=210 temp=208.9 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66025.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63178158 bytes_read=9708794 bytes_retransmit=9 bytes_invalid=0 send_seq=1201722 receive_seq=1201722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=15617 freq=400007879 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=122709 bytes_read=379845 bytes_retransmit=0 bytes_invalid=0 send_seq=20427 receive_seq=20427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002028 adj=50000597 sd_pos=3881579 heater_bed: target=60 temp=60.0 pwm=0.294 sysload=0.25 cputime=5940.201 memavail=3268312 print_time=20060.290 buffer_time=2.875 print_stall=0 extruder: target=210 temp=208.8 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66026.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63187777 bytes_read=9709859 bytes_retransmit=9 bytes_invalid=0 send_seq=1201892 receive_seq=1201892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9504 freq=400007873 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122715 bytes_read=379874 bytes_retransmit=0 bytes_invalid=0 send_seq=20428 receive_seq=20428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002028 adj=50000603 sd_pos=3881797 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=0.25 cputime=5940.371 memavail=3268312 print_time=20060.680 buffer_time=2.264 print_stall=0 extruder: target=210 temp=208.9 pwm=0.441
Stats 66027.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63196750 bytes_read=9710891 bytes_retransmit=9 bytes_invalid=0 send_seq=1202052 receive_seq=1202052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=4430 freq=400007850 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122721 bytes_read=379890 bytes_retransmit=0 bytes_invalid=0 send_seq=20429 receive_seq=20429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002027 adj=50000608 sd_pos=3881982 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.25 cputime=5940.562 memavail=3268072 print_time=20061.523 buffer_time=2.106 print_stall=0 extruder: target=210 temp=209.3 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66028.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63205975 bytes_read=9711888 bytes_retransmit=9 bytes_invalid=0 send_seq=1202211 receive_seq=1202211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=6 upcoming_bytes=973 freq=400007840 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122727 bytes_read=379906 bytes_retransmit=0 bytes_invalid=0 send_seq=20430 receive_seq=20430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002022 adj=50000630 sd_pos=3882511 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.25 cputime=5940.757 memavail=3267568 print_time=20062.530 buffer_time=2.112 print_stall=0 extruder: target=210 temp=209.7 pwm=0.311
Stats 66029.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63210227 bytes_read=9712465 bytes_retransmit=9 bytes_invalid=0 send_seq=1202283 receive_seq=1202283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=349 freq=400007832 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122733 bytes_read=379922 bytes_retransmit=0 bytes_invalid=0 send_seq=20431 receive_seq=20431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002018 adj=50000609 sd_pos=3882600 heater_bed: target=60 temp=60.0 pwm=0.024 sysload=0.23 cputime=5940.970 memavail=3266060 print_time=20063.540 buffer_time=2.121 print_stall=0 extruder: target=210 temp=210.2 pwm=0.252
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66030.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63215446 bytes_read=9713166 bytes_retransmit=9 bytes_invalid=0 send_seq=1202380 receive_seq=1202380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=9922 freq=400007814 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122739 bytes_read=379938 bytes_retransmit=0 bytes_invalid=0 send_seq=20432 receive_seq=20432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002012 adj=50000659 sd_pos=3885493 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.23 cputime=5941.108 memavail=3266060 print_time=20065.473 buffer_time=3.053 print_stall=0 extruder: target=210 temp=210.8 pwm=0.252
Stats 66031.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63219390 bytes_read=9713753 bytes_retransmit=9 bytes_invalid=0 send_seq=1202457 receive_seq=1202457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=6501 freq=400007808 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122745 bytes_read=379967 bytes_retransmit=0 bytes_invalid=0 send_seq=20433 receive_seq=20433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002007 adj=50000838 sd_pos=3885493 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.23 cputime=5941.140 memavail=3266060 print_time=20065.473 buffer_time=2.052 print_stall=0 extruder: target=210 temp=211.1 pwm=0.196
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66032.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63226903 bytes_read=9714656 bytes_retransmit=9 bytes_invalid=0 send_seq=1202591 receive_seq=1202591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=8493 freq=400007803 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122751 bytes_read=379983 bytes_retransmit=0 bytes_invalid=0 send_seq=20434 receive_seq=20434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002007 adj=50000801 sd_pos=3887159 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.23 cputime=5941.267 memavail=3266312 print_time=20066.574 buffer_time=2.153 print_stall=0 extruder: target=210 temp=211.2 pwm=0.196
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66033.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63235942 bytes_read=9715667 bytes_retransmit=9 bytes_invalid=0 send_seq=1202750 receive_seq=1202750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=11854 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122757 bytes_read=379999 bytes_retransmit=0 bytes_invalid=0 send_seq=20435 receive_seq=20435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002006 adj=50000811 sd_pos=3889799 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.23 cputime=5941.400 memavail=3266312 print_time=20067.909 buffer_time=2.488 print_stall=0 extruder: target=210 temp=211.0 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66034.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63245020 bytes_read=9716674 bytes_retransmit=9 bytes_invalid=0 send_seq=1202911 receive_seq=1202911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=12888 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122763 bytes_read=380015 bytes_retransmit=0 bytes_invalid=0 send_seq=20436 receive_seq=20436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002000 adj=50000837 sd_pos=3891388 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.21 cputime=5941.554 memavail=3266312 print_time=20069.260 buffer_time=2.838 print_stall=0 extruder: target=210 temp=210.6 pwm=0.325
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66035.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63254434 bytes_read=9717726 bytes_retransmit=9 bytes_invalid=0 send_seq=1203078 receive_seq=1203078 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=12122 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122769 bytes_read=380031 bytes_retransmit=0 bytes_invalid=0 send_seq=20437 receive_seq=20437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001993 adj=50000854 sd_pos=3892689 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.21 cputime=5941.629 memavail=3266312 print_time=20070.181 buffer_time=2.758 print_stall=0 extruder: target=210 temp=210.2 pwm=0.392
Stats 66036.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63262295 bytes_read=9718642 bytes_retransmit=9 bytes_invalid=0 send_seq=1203219 receive_seq=1203219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=6814 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122775 bytes_read=380060 bytes_retransmit=0 bytes_invalid=0 send_seq=20438 receive_seq=20438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001989 adj=50000824 sd_pos=3892689 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.21 cputime=5941.715 memavail=3266060 print_time=20070.511 buffer_time=2.088 print_stall=0 extruder: target=210 temp=209.6 pwm=0.453
Stats 66037.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63270566 bytes_read=9719600 bytes_retransmit=9 bytes_invalid=0 send_seq=1203367 receive_seq=1203367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3216 freq=400007750 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122781 bytes_read=380076 bytes_retransmit=0 bytes_invalid=0 send_seq=20439 receive_seq=20439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001983 adj=50000784 sd_pos=3893001 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.21 cputime=5941.955 memavail=3265572 print_time=20071.593 buffer_time=2.169 print_stall=0 extruder: target=210 temp=209.4 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66038.0: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63278422 bytes_read=9720512 bytes_retransmit=9 bytes_invalid=0 send_seq=1203506 receive_seq=1203506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1166 freq=400007735 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122787 bytes_read=380092 bytes_retransmit=0 bytes_invalid=0 send_seq=20440 receive_seq=20440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001976 adj=50000739 sd_pos=3893571 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.21 cputime=5942.126 memavail=3264712 print_time=20072.599 buffer_time=2.174 print_stall=0 extruder: target=210 temp=209.2 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66039.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63282528 bytes_read=9721123 bytes_retransmit=9 bytes_invalid=0 send_seq=1203585 receive_seq=1203585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1876 freq=400007733 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122793 bytes_read=380108 bytes_retransmit=0 bytes_invalid=0 send_seq=20441 receive_seq=20441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001975 adj=50000736 sd_pos=3893934 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.19 cputime=5942.387 memavail=3263568 print_time=20073.827 buffer_time=2.385 print_stall=0 extruder: target=210 temp=209.2 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66040.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63287971 bytes_read=9721835 bytes_retransmit=9 bytes_invalid=0 send_seq=1203687 receive_seq=1203687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=6405 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=122799 bytes_read=380124 bytes_retransmit=0 bytes_invalid=0 send_seq=20442 receive_seq=20442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001969 adj=50000800 sd_pos=3895381 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.19 cputime=5942.461 memavail=3263568 print_time=20075.078 buffer_time=2.635 print_stall=0 extruder: target=210 temp=209.4 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66041.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=63292440 bytes_read=9722496 bytes_retransmit=9 bytes_invalid=0 send_seq=1203773 receive_seq=1203773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=9737 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122805 bytes_read=380153 bytes_retransmit=0 bytes_invalid=0 send_seq=20443 receive_seq=20443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001963 adj=50000835 sd_pos=3896908 heater_bed: target=60 temp=60.0 pwm=0.239 sysload=0.19 cputime=5942.515 memavail=3263568 print_time=20075.956 buffer_time=2.512 print_stall=0 extruder: target=210 temp=209.7 pwm=0.315
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66042.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63299992 bytes_read=9723394 bytes_retransmit=9 bytes_invalid=0 send_seq=1203909 receive_seq=1203909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=8920 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122811 bytes_read=380169 bytes_retransmit=0 bytes_invalid=0 send_seq=20444 receive_seq=20444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001956 adj=50000769 sd_pos=3898041 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.19 cputime=5942.578 memavail=3263568 print_time=20076.801 buffer_time=2.357 print_stall=0 extruder: target=210 temp=209.9 pwm=0.315
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66043.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63308222 bytes_read=9724331 bytes_retransmit=9 bytes_invalid=0 send_seq=1204056 receive_seq=1204056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=5430 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122817 bytes_read=380185 bytes_retransmit=0 bytes_invalid=0 send_seq=20445 receive_seq=20445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001951 adj=50000728 sd_pos=3898230 heater_bed: target=60 temp=60.0 pwm=0.262 sysload=0.19 cputime=5942.715 memavail=3263568 print_time=20077.482 buffer_time=2.037 print_stall=0 extruder: target=210 temp=210.1 pwm=0.315
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66044.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63316270 bytes_read=9725282 bytes_retransmit=9 bytes_invalid=0 send_seq=1204200 receive_seq=1204200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2841 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122823 bytes_read=380201 bytes_retransmit=0 bytes_invalid=0 send_seq=20446 receive_seq=20446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001945 adj=50000664 sd_pos=3898804 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.18 cputime=5942.984 memavail=3263320 print_time=20078.734 buffer_time=2.288 print_stall=0 extruder: target=210 temp=210.1 pwm=0.315
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66045.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63323064 bytes_read=9726099 bytes_retransmit=9 bytes_invalid=0 send_seq=1204323 receive_seq=1204323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=769 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122829 bytes_read=380217 bytes_retransmit=0 bytes_invalid=0 send_seq=20447 receive_seq=20447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001940 adj=50000706 sd_pos=3899151 heater_bed: target=60 temp=60.0 pwm=0.137 sysload=0.18 cputime=5943.166 memavail=3262584 print_time=20079.582 buffer_time=2.121 print_stall=0 extruder: target=210 temp=210.2 pwm=0.315
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66046.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63327127 bytes_read=9726661 bytes_retransmit=9 bytes_invalid=0 send_seq=1204392 receive_seq=1204392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1024 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122835 bytes_read=380246 bytes_retransmit=0 bytes_invalid=0 send_seq=20448 receive_seq=20448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001941 adj=50000631 sd_pos=3899384 heater_bed: target=60 temp=60.0 pwm=0.301 sysload=0.18 cputime=5943.351 memavail=3261324 print_time=20080.643 buffer_time=2.181 print_stall=0 extruder: target=210 temp=210.3 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66047.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63332547 bytes_read=9727392 bytes_retransmit=9 bytes_invalid=0 send_seq=1204493 receive_seq=1204493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=2895 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122841 bytes_read=380262 bytes_retransmit=0 bytes_invalid=0 send_seq=20449 receive_seq=20449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001936 adj=50000744 sd_pos=3900940 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5943.419 memavail=3261324 print_time=20081.526 buffer_time=2.064 print_stall=0 extruder: target=210 temp=210.3 pwm=0.306
Stats 66048.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63336631 bytes_read=9727994 bytes_retransmit=9 bytes_invalid=0 send_seq=1204573 receive_seq=1204573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=3873 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122847 bytes_read=380278 bytes_retransmit=0 bytes_invalid=0 send_seq=20450 receive_seq=20450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001929 adj=50000723 sd_pos=3901245 heater_bed: target=60 temp=60.0 pwm=0.357 sysload=0.18 cputime=5943.643 memavail=3261324 print_time=20082.652 buffer_time=2.189 print_stall=0 extruder: target=210 temp=210.2 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66049.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63344604 bytes_read=9728926 bytes_retransmit=9 bytes_invalid=0 send_seq=1204716 receive_seq=1204716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1563 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122853 bytes_read=380294 bytes_retransmit=0 bytes_invalid=0 send_seq=20451 receive_seq=20451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001925 adj=50000688 sd_pos=3901896 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.16 cputime=5943.825 memavail=3261356 print_time=20083.643 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.0 pwm=0.402
Stats 66050.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63349300 bytes_read=9729592 bytes_retransmit=9 bytes_invalid=0 send_seq=1204806 receive_seq=1204806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=388 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=122859 bytes_read=380310 bytes_retransmit=0 bytes_invalid=0 send_seq=20452 receive_seq=20452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001922 adj=50000707 sd_pos=3901896 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.16 cputime=5944.046 memavail=3264520 print_time=20084.524 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.7 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66051.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63354387 bytes_read=9730279 bytes_retransmit=9 bytes_invalid=0 send_seq=1204903 receive_seq=1204903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=471 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122865 bytes_read=380339 bytes_retransmit=0 bytes_invalid=0 send_seq=20453 receive_seq=20453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001916 adj=50000723 sd_pos=3902794 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.16 cputime=5944.239 memavail=3264520 print_time=20085.526 buffer_time=2.059 print_stall=0 extruder: target=210 temp=209.4 pwm=0.466
Stats 66052.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63358575 bytes_read=9730877 bytes_retransmit=9 bytes_invalid=0 send_seq=1204976 receive_seq=1204976 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122871 bytes_read=380355 bytes_retransmit=0 bytes_invalid=0 send_seq=20454 receive_seq=20454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001912 adj=50000727 sd_pos=3903016 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.16 cputime=5944.417 memavail=3264520 print_time=20086.469 buffer_time=2.002 print_stall=0 extruder: target=210 temp=209.3 pwm=0.466
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66053.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63363785 bytes_read=9731578 bytes_retransmit=9 bytes_invalid=0 send_seq=1205073 receive_seq=1205073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=438 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122877 bytes_read=380371 bytes_retransmit=0 bytes_invalid=0 send_seq=20455 receive_seq=20455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001907 adj=50000732 sd_pos=3903608 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.16 cputime=5944.589 memavail=3264016 print_time=20087.494 buffer_time=2.027 print_stall=0 extruder: target=210 temp=209.0 pwm=0.466
Stats 66054.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63367744 bytes_read=9732165 bytes_retransmit=9 bytes_invalid=0 send_seq=1205150 receive_seq=1205150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=528 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122883 bytes_read=380387 bytes_retransmit=0 bytes_invalid=0 send_seq=20456 receive_seq=20456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001903 adj=50000752 sd_pos=3903741 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.15 cputime=5944.795 memavail=3263008 print_time=20088.525 buffer_time=2.058 print_stall=0 extruder: target=210 temp=209.0 pwm=0.466
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66055.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63373165 bytes_read=9732877 bytes_retransmit=9 bytes_invalid=0 send_seq=1205249 receive_seq=1205249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1108 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122889 bytes_read=380403 bytes_retransmit=0 bytes_invalid=0 send_seq=20457 receive_seq=20457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001903 adj=50000760 sd_pos=3904610 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.15 cputime=5945.052 memavail=3263156 print_time=20089.676 buffer_time=2.208 print_stall=0 extruder: target=210 temp=209.0 pwm=0.466
Stats 66056.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63377132 bytes_read=9733468 bytes_retransmit=9 bytes_invalid=0 send_seq=1205324 receive_seq=1205324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=452 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=122895 bytes_read=380432 bytes_retransmit=0 bytes_invalid=0 send_seq=20458 receive_seq=20458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001898 adj=50000801 sd_pos=3904796 heater_bed: target=60 temp=60.0 pwm=0.208 sysload=0.15 cputime=5945.219 memavail=3266960 print_time=20090.481 buffer_time=2.011 print_stall=0 extruder: target=210 temp=209.2 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66057.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63382599 bytes_read=9734160 bytes_retransmit=9 bytes_invalid=0 send_seq=1205419 receive_seq=1205419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=510 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=122901 bytes_read=380448 bytes_retransmit=0 bytes_invalid=0 send_seq=20459 receive_seq=20459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001894 adj=50000743 sd_pos=3905397 heater_bed: target=60 temp=60.0 pwm=0.017 sysload=0.15 cputime=5945.401 memavail=3266960 print_time=20091.534 buffer_time=2.063 print_stall=0 extruder: target=210 temp=209.4 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66058.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63386712 bytes_read=9734768 bytes_retransmit=9 bytes_invalid=0 send_seq=1205498 receive_seq=1205498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1414 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=122907 bytes_read=380464 bytes_retransmit=0 bytes_invalid=0 send_seq=20460 receive_seq=20460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001888 adj=50000727 sd_pos=3906106 heater_bed: target=60 temp=60.0 pwm=0.153 sysload=0.15 cputime=5945.626 memavail=3266708 print_time=20092.789 buffer_time=2.318 print_stall=0 extruder: target=210 temp=209.5 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66059.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63392038 bytes_read=9735474 bytes_retransmit=9 bytes_invalid=0 send_seq=1205596 receive_seq=1205596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=588 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=122913 bytes_read=380480 bytes_retransmit=0 bytes_invalid=0 send_seq=20461 receive_seq=20461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001883 adj=50000743 sd_pos=3906500 heater_bed: target=60 temp=60.0 pwm=0.217 sysload=0.22 cputime=5945.799 memavail=3266236 print_time=20093.667 buffer_time=2.190 print_stall=0 extruder: target=210 temp=209.8 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66060.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63395916 bytes_read=9736016 bytes_retransmit=9 bytes_invalid=0 send_seq=1205664 receive_seq=1205664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1216 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=122919 bytes_read=380496 bytes_retransmit=0 bytes_invalid=0 send_seq=20462 receive_seq=20462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001879 adj=50000722 sd_pos=3906986 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.22 cputime=5945.988 memavail=3266012 print_time=20094.732 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.9 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66061.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63401075 bytes_read=9736708 bytes_retransmit=9 bytes_invalid=0 send_seq=1205759 receive_seq=1205759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1445 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122925 bytes_read=380525 bytes_retransmit=0 bytes_invalid=0 send_seq=20463 receive_seq=20463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001874 adj=50000739 sd_pos=3907230 heater_bed: target=60 temp=60.0 pwm=0.309 sysload=0.22 cputime=5946.209 memavail=3270172 print_time=20095.681 buffer_time=2.168 print_stall=0 extruder: target=210 temp=210.1 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66062.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63405143 bytes_read=9737335 bytes_retransmit=9 bytes_invalid=0 send_seq=1205838 receive_seq=1205838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1531 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122931 bytes_read=380541 bytes_retransmit=0 bytes_invalid=0 send_seq=20464 receive_seq=20464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001871 adj=50000705 sd_pos=3907929 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.22 cputime=5946.384 memavail=3270172 print_time=20096.659 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.1 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66063.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63410974 bytes_read=9738072 bytes_retransmit=9 bytes_invalid=0 send_seq=1205945 receive_seq=1205945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=632 freq=400007582 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122937 bytes_read=380557 bytes_retransmit=0 bytes_invalid=0 send_seq=20465 receive_seq=20465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001867 adj=50000699 sd_pos=3908329 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.22 cputime=5946.549 memavail=3270172 print_time=20097.620 buffer_time=2.105 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66064.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63415107 bytes_read=9738679 bytes_retransmit=9 bytes_invalid=0 send_seq=1206023 receive_seq=1206023 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=563 freq=400007581 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122943 bytes_read=380573 bytes_retransmit=0 bytes_invalid=0 send_seq=20466 receive_seq=20466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001862 adj=50000701 sd_pos=3908831 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.20 cputime=5946.738 memavail=3270172 print_time=20098.588 buffer_time=2.073 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
Stats 66065.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63419910 bytes_read=9739305 bytes_retransmit=9 bytes_invalid=0 send_seq=1206105 receive_seq=1206105 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=122949 bytes_read=380589 bytes_retransmit=0 bytes_invalid=0 send_seq=20467 receive_seq=20467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001859 adj=50000681 sd_pos=3908831 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.20 cputime=5946.923 memavail=3269164 print_time=20099.583 buffer_time=2.067 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66066.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63424404 bytes_read=9739937 bytes_retransmit=9 bytes_invalid=0 send_seq=1206191 receive_seq=1206191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1403 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122955 bytes_read=380618 bytes_retransmit=0 bytes_invalid=0 send_seq=20468 receive_seq=20468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001857 adj=50000511 sd_pos=3909690 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.20 cputime=5947.121 memavail=3267912 print_time=20100.668 buffer_time=2.151 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
Stats 66067.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63428637 bytes_read=9740575 bytes_retransmit=9 bytes_invalid=0 send_seq=1206272 receive_seq=1206272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=908 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122961 bytes_read=380633 bytes_retransmit=0 bytes_invalid=0 send_seq=20469 receive_seq=20469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001854 adj=50000592 sd_pos=3910034 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.20 cputime=5947.317 memavail=3267672 print_time=20101.561 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.9 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66068.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63434175 bytes_read=9741262 bytes_retransmit=9 bytes_invalid=0 send_seq=1206367 receive_seq=1206367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1066 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122967 bytes_read=380648 bytes_retransmit=0 bytes_invalid=0 send_seq=20470 receive_seq=20470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001848 adj=50000585 sd_pos=3910567 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.20 cputime=5947.497 memavail=3267672 print_time=20102.620 buffer_time=2.102 print_stall=0 extruder: target=210 temp=209.7 pwm=0.429
Stats 66069.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63438444 bytes_read=9741872 bytes_retransmit=9 bytes_invalid=0 send_seq=1206449 receive_seq=1206449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=739 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122973 bytes_read=380663 bytes_retransmit=0 bytes_invalid=0 send_seq=20471 receive_seq=20471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001842 adj=50000605 sd_pos=3910684 heater_bed: target=60 temp=60.0 pwm=0.233 sysload=0.26 cputime=5947.707 memavail=3267172 print_time=20103.664 buffer_time=2.145 print_stall=0 extruder: target=210 temp=209.6 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66070.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63443890 bytes_read=9742584 bytes_retransmit=9 bytes_invalid=0 send_seq=1206548 receive_seq=1206548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=244 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=122979 bytes_read=380678 bytes_retransmit=0 bytes_invalid=0 send_seq=20472 receive_seq=20472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001838 adj=50000618 sd_pos=3911639 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.26 cputime=5947.834 memavail=3267172 print_time=20104.523 buffer_time=2.004 print_stall=0 extruder: target=210 temp=209.6 pwm=0.429
Stats 66071.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63447665 bytes_read=9743115 bytes_retransmit=9 bytes_invalid=0 send_seq=1206611 receive_seq=1206611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=944 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122985 bytes_read=380706 bytes_retransmit=0 bytes_invalid=0 send_seq=20473 receive_seq=20473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001833 adj=50000595 sd_pos=3911946 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.26 cputime=5948.098 memavail=3267176 print_time=20105.653 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66072.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63453214 bytes_read=9743838 bytes_retransmit=9 bytes_invalid=0 send_seq=1206712 receive_seq=1206712 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=540 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122991 bytes_read=380721 bytes_retransmit=0 bytes_invalid=0 send_seq=20474 receive_seq=20474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001828 adj=50000644 sd_pos=3912452 heater_bed: target=60 temp=60.0 pwm=0.022 sysload=0.26 cputime=5948.263 memavail=3267176 print_time=20106.638 buffer_time=2.118 print_stall=0 extruder: target=210 temp=209.6 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66073.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63457440 bytes_read=9744444 bytes_retransmit=9 bytes_invalid=0 send_seq=1206787 receive_seq=1206787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=1994 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=122997 bytes_read=380737 bytes_retransmit=0 bytes_invalid=0 send_seq=20475 receive_seq=20475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001823 adj=50000649 sd_pos=3913132 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.26 cputime=5948.489 memavail=3267176 print_time=20107.973 buffer_time=2.407 print_stall=0 extruder: target=210 temp=209.7 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66074.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63462581 bytes_read=9745126 bytes_retransmit=9 bytes_invalid=0 send_seq=1206883 receive_seq=1206883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=984 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123003 bytes_read=380753 bytes_retransmit=0 bytes_invalid=0 send_seq=20476 receive_seq=20476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001819 adj=50000679 sd_pos=3913393 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.24 cputime=5948.618 memavail=3267176 print_time=20108.661 buffer_time=2.095 print_stall=0 extruder: target=210 temp=209.9 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66075.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63466677 bytes_read=9745738 bytes_retransmit=9 bytes_invalid=0 send_seq=1206962 receive_seq=1206962 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=2213 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123009 bytes_read=380769 bytes_retransmit=0 bytes_invalid=0 send_seq=20477 receive_seq=20477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001814 adj=50000617 sd_pos=3913938 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.24 cputime=5948.854 memavail=3267176 print_time=20109.933 buffer_time=2.367 print_stall=0 extruder: target=210 temp=210.0 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66076.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63472363 bytes_read=9746479 bytes_retransmit=9 bytes_invalid=0 send_seq=1207067 receive_seq=1207067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=651 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=123015 bytes_read=380798 bytes_retransmit=0 bytes_invalid=0 send_seq=20478 receive_seq=20478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001809 adj=50000644 sd_pos=3914180 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.24 cputime=5949.037 memavail=3266688 print_time=20110.584 buffer_time=2.017 print_stall=0 extruder: target=210 temp=210.2 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66077.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63476660 bytes_read=9747102 bytes_retransmit=9 bytes_invalid=0 send_seq=1207148 receive_seq=1207148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=1275 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=123021 bytes_read=380814 bytes_retransmit=0 bytes_invalid=0 send_seq=20479 receive_seq=20479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001804 adj=50000602 sd_pos=3914842 heater_bed: target=60 temp=60.0 pwm=0.025 sysload=0.24 cputime=5949.265 memavail=3266688 print_time=20111.813 buffer_time=2.245 print_stall=0 extruder: target=210 temp=210.3 pwm=0.379
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66078.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63482082 bytes_read=9747824 bytes_retransmit=9 bytes_invalid=0 send_seq=1207249 receive_seq=1207249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=461 freq=400007577 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=123027 bytes_read=380830 bytes_retransmit=0 bytes_invalid=0 send_seq=20480 receive_seq=20480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001800 adj=50000639 sd_pos=3915189 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.24 cputime=5949.440 memavail=3266688 print_time=20112.748 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.4 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66079.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63486006 bytes_read=9748416 bytes_retransmit=9 bytes_invalid=0 send_seq=1207325 receive_seq=1207325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=621 freq=400007564 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=123033 bytes_read=380846 bytes_retransmit=0 bytes_invalid=0 send_seq=20481 receive_seq=20481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001795 adj=50000627 sd_pos=3915602 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.30 cputime=5949.619 memavail=3265708 print_time=20113.728 buffer_time=2.141 print_stall=0 extruder: target=210 temp=210.5 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66080.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63491133 bytes_read=9749092 bytes_retransmit=9 bytes_invalid=0 send_seq=1207420 receive_seq=1207420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=123039 bytes_read=380862 bytes_retransmit=0 bytes_invalid=0 send_seq=20482 receive_seq=20482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001792 adj=50000630 sd_pos=3915843 heater_bed: target=60 temp=59.9 pwm=0.276 sysload=0.30 cputime=5949.782 memavail=3265708 print_time=20114.589 buffer_time=2.002 print_stall=0 extruder: target=210 temp=210.5 pwm=0.352
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66081.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63495773 bytes_read=9749763 bytes_retransmit=9 bytes_invalid=0 send_seq=1207509 receive_seq=1207508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2369 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123051 bytes_read=380907 bytes_retransmit=0 bytes_invalid=0 send_seq=20484 receive_seq=20484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001788 adj=50000587 sd_pos=3916842 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.30 cputime=5950.051 memavail=3265204 print_time=20116.105 buffer_time=2.430 print_stall=0 extruder: target=210 temp=210.4 pwm=0.352
Stats 66082.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63500520 bytes_read=9750422 bytes_retransmit=9 bytes_invalid=0 send_seq=1207594 receive_seq=1207594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=768 freq=400007577 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123057 bytes_read=380923 bytes_retransmit=0 bytes_invalid=0 send_seq=20485 receive_seq=20485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001785 adj=50000674 sd_pos=3916971 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.30 cputime=5950.220 memavail=3265204 print_time=20116.854 buffer_time=2.178 print_stall=0 extruder: target=210 temp=210.3 pwm=0.372
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66083.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63505313 bytes_read=9751084 bytes_retransmit=9 bytes_invalid=0 send_seq=1207683 receive_seq=1207683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1529 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123063 bytes_read=380939 bytes_retransmit=0 bytes_invalid=0 send_seq=20486 receive_seq=20486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001779 adj=50000619 sd_pos=3917580 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.30 cputime=5950.395 memavail=3264964 print_time=20117.918 buffer_time=2.241 print_stall=0 extruder: target=210 temp=210.2 pwm=0.372
Stats 66084.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63509716 bytes_read=9751695 bytes_retransmit=9 bytes_invalid=0 send_seq=1207762 receive_seq=1207762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=562 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123069 bytes_read=380955 bytes_retransmit=0 bytes_invalid=0 send_seq=20487 receive_seq=20487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001774 adj=50000600 sd_pos=3917668 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.28 cputime=5950.567 memavail=3264964 print_time=20118.710 buffer_time=2.033 print_stall=0 extruder: target=210 temp=210.0 pwm=0.426
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66085.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63514694 bytes_read=9752337 bytes_retransmit=9 bytes_invalid=0 send_seq=1207850 receive_seq=1207850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1261 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123075 bytes_read=380971 bytes_retransmit=0 bytes_invalid=0 send_seq=20488 receive_seq=20488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001769 adj=50000559 sd_pos=3918427 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.28 cputime=5950.740 memavail=3264964 print_time=20119.886 buffer_time=2.209 print_stall=0 extruder: target=210 temp=209.8 pwm=0.426
Stats 66086.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63519502 bytes_read=9753018 bytes_retransmit=9 bytes_invalid=0 send_seq=1207940 receive_seq=1207940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=983 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123081 bytes_read=381000 bytes_retransmit=0 bytes_invalid=0 send_seq=20489 receive_seq=20489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001765 adj=50000574 sd_pos=3918773 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.28 cputime=5951.006 memavail=3264972 print_time=20120.923 buffer_time=2.169 print_stall=0 extruder: target=210 temp=209.7 pwm=0.426
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66087.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63524719 bytes_read=9753726 bytes_retransmit=9 bytes_invalid=0 send_seq=1208038 receive_seq=1208038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=534 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123087 bytes_read=381016 bytes_retransmit=0 bytes_invalid=0 send_seq=20490 receive_seq=20490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001761 adj=50000552 sd_pos=3919170 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.28 cputime=5951.144 memavail=3264972 print_time=20121.776 buffer_time=2.021 print_stall=0 extruder: target=210 temp=209.6 pwm=0.426
Stats 66088.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63528919 bytes_read=9754353 bytes_retransmit=9 bytes_invalid=0 send_seq=1208120 receive_seq=1208120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=247 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123093 bytes_read=381032 bytes_retransmit=0 bytes_invalid=0 send_seq=20491 receive_seq=20491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001759 adj=50000359 sd_pos=3919383 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.28 cputime=5951.359 memavail=3264972 print_time=20122.779 buffer_time=2.023 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66089.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63534342 bytes_read=9755072 bytes_retransmit=9 bytes_invalid=0 send_seq=1208221 receive_seq=1208221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=483 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123099 bytes_read=381048 bytes_retransmit=0 bytes_invalid=0 send_seq=20492 receive_seq=20492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001753 adj=50000421 sd_pos=3920272 heater_bed: target=60 temp=60.0 pwm=0.040 sysload=0.26 cputime=5951.548 memavail=3263972 print_time=20123.867 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.7 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66090.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63538236 bytes_read=9755632 bytes_retransmit=9 bytes_invalid=0 send_seq=1208293 receive_seq=1208293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1729 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123105 bytes_read=381064 bytes_retransmit=0 bytes_invalid=0 send_seq=20493 receive_seq=20493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001748 adj=50000453 sd_pos=3920759 heater_bed: target=60 temp=59.9 pwm=0.296 sysload=0.26 cputime=5951.783 memavail=3263972 print_time=20125.173 buffer_time=2.411 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66091.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63543593 bytes_read=9756344 bytes_retransmit=9 bytes_invalid=0 send_seq=1208392 receive_seq=1208392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=696 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123111 bytes_read=381093 bytes_retransmit=0 bytes_invalid=0 send_seq=20494 receive_seq=20494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001743 adj=50000531 sd_pos=3920973 heater_bed: target=60 temp=60.0 pwm=0.293 sysload=0.26 cputime=5951.921 memavail=3268276 print_time=20125.850 buffer_time=2.087 print_stall=0 extruder: target=210 temp=209.8 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66092.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63547475 bytes_read=9756951 bytes_retransmit=9 bytes_invalid=0 send_seq=1208467 receive_seq=1208467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1917 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123117 bytes_read=381109 bytes_retransmit=0 bytes_invalid=0 send_seq=20495 receive_seq=20495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001739 adj=50000493 sd_pos=3921653 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.26 cputime=5952.179 memavail=3266648 print_time=20127.103 buffer_time=2.339 print_stall=0 extruder: target=210 temp=209.9 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66093.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63553218 bytes_read=9757683 bytes_retransmit=9 bytes_invalid=0 send_seq=1208573 receive_seq=1208573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=850 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123123 bytes_read=381125 bytes_retransmit=0 bytes_invalid=0 send_seq=20496 receive_seq=20496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001736 adj=50000550 sd_pos=3922010 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.26 cputime=5952.349 memavail=3266648 print_time=20128.008 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.1 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66094.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63556857 bytes_read=9758255 bytes_retransmit=9 bytes_invalid=0 send_seq=1208644 receive_seq=1208644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1497 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123129 bytes_read=381141 bytes_retransmit=0 bytes_invalid=0 send_seq=20497 receive_seq=20497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001731 adj=50000528 sd_pos=3922422 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.24 cputime=5952.525 memavail=3266648 print_time=20129.020 buffer_time=2.219 print_stall=0 extruder: target=210 temp=210.2 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66095.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63562558 bytes_read=9759001 bytes_retransmit=9 bytes_invalid=0 send_seq=1208750 receive_seq=1208750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=784 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123135 bytes_read=381157 bytes_retransmit=0 bytes_invalid=0 send_seq=20498 receive_seq=20498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001728 adj=50000527 sd_pos=3922752 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.24 cputime=5952.706 memavail=3266648 print_time=20129.964 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66096.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63566496 bytes_read=9759588 bytes_retransmit=9 bytes_invalid=0 send_seq=1208827 receive_seq=1208827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=831 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123141 bytes_read=381186 bytes_retransmit=0 bytes_invalid=0 send_seq=20499 receive_seq=20499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001728 adj=50000525 sd_pos=3923314 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.24 cputime=5952.871 memavail=3266648 print_time=20130.927 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66097.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63571820 bytes_read=9760321 bytes_retransmit=9 bytes_invalid=0 send_seq=1208927 receive_seq=1208927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=761 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123147 bytes_read=381202 bytes_retransmit=0 bytes_invalid=0 send_seq=20500 receive_seq=20500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001727 adj=50000572 sd_pos=3923636 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.24 cputime=5953.080 memavail=3266648 print_time=20131.892 buffer_time=2.090 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66098.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63575699 bytes_read=9760867 bytes_retransmit=9 bytes_invalid=0 send_seq=1208993 receive_seq=1208993 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1381 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123153 bytes_read=381218 bytes_retransmit=0 bytes_invalid=0 send_seq=20501 receive_seq=20501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001724 adj=50000590 sd_pos=3924164 heater_bed: target=60 temp=60.0 pwm=0.284 sysload=0.24 cputime=5953.265 memavail=3266648 print_time=20132.900 buffer_time=2.096 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66099.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63581348 bytes_read=9761569 bytes_retransmit=9 bytes_invalid=0 send_seq=1209093 receive_seq=1209093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1163 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123159 bytes_read=381234 bytes_retransmit=0 bytes_invalid=0 send_seq=20502 receive_seq=20502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001718 adj=50000586 sd_pos=3924499 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.22 cputime=5953.486 memavail=3266152 print_time=20134.034 buffer_time=2.230 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66100.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63585810 bytes_read=9762207 bytes_retransmit=9 bytes_invalid=0 send_seq=1209178 receive_seq=1209178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=2086 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123165 bytes_read=381250 bytes_retransmit=0 bytes_invalid=0 send_seq=20503 receive_seq=20503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001713 adj=50000572 sd_pos=3925292 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.22 cputime=5953.652 memavail=3266152 print_time=20135.069 buffer_time=2.264 print_stall=0 extruder: target=210 temp=210.3 pwm=0.400
Stats 66101.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63590826 bytes_read=9762897 bytes_retransmit=9 bytes_invalid=0 send_seq=1209273 receive_seq=1209273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=399 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123171 bytes_read=381279 bytes_retransmit=0 bytes_invalid=0 send_seq=20504 receive_seq=20504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001708 adj=50000564 sd_pos=3925510 heater_bed: target=60 temp=60.0 pwm=0.191 sysload=0.22 cputime=5953.823 memavail=3266152 print_time=20135.894 buffer_time=2.089 print_stall=0 extruder: target=210 temp=210.1 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66102.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63595607 bytes_read=9763565 bytes_retransmit=9 bytes_invalid=0 send_seq=1209363 receive_seq=1209363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1425 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123177 bytes_read=381295 bytes_retransmit=0 bytes_invalid=0 send_seq=20505 receive_seq=20505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001703 adj=50000524 sd_pos=3926038 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.22 cputime=5954.041 memavail=3265912 print_time=20136.994 buffer_time=2.188 print_stall=0 extruder: target=210 temp=209.8 pwm=0.400
Stats 66103.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63599960 bytes_read=9764152 bytes_retransmit=9 bytes_invalid=0 send_seq=1209437 receive_seq=1209437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1095 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123183 bytes_read=381311 bytes_retransmit=0 bytes_invalid=0 send_seq=20506 receive_seq=20506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001698 adj=50000533 sd_pos=3926153 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5954.247 memavail=3265912 print_time=20138.028 buffer_time=2.209 print_stall=0 extruder: target=210 temp=209.6 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66104.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63605340 bytes_read=9764843 bytes_retransmit=9 bytes_invalid=0 send_seq=1209532 receive_seq=1209532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1065 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123189 bytes_read=381327 bytes_retransmit=0 bytes_invalid=0 send_seq=20507 receive_seq=20507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001694 adj=50000523 sd_pos=3927076 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.20 cputime=5954.386 memavail=3265912 print_time=20138.948 buffer_time=2.128 print_stall=0 extruder: target=210 temp=209.5 pwm=0.455
Stats 66105.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63609409 bytes_read=9765440 bytes_retransmit=9 bytes_invalid=0 send_seq=1209611 receive_seq=1209611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1364 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123195 bytes_read=381343 bytes_retransmit=0 bytes_invalid=0 send_seq=20508 receive_seq=20508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001689 adj=50000464 sd_pos=3927351 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.20 cputime=5954.611 memavail=3265912 print_time=20140.037 buffer_time=2.216 print_stall=0 extruder: target=210 temp=209.4 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66106.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63615163 bytes_read=9766187 bytes_retransmit=9 bytes_invalid=0 send_seq=1209717 receive_seq=1209717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=520 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123201 bytes_read=381372 bytes_retransmit=0 bytes_invalid=0 send_seq=20509 receive_seq=20509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001688 adj=50000493 sd_pos=3927745 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.20 cputime=5954.785 memavail=3265912 print_time=20140.999 buffer_time=2.178 print_stall=0 extruder: target=210 temp=209.4 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66107.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63619196 bytes_read=9766814 bytes_retransmit=9 bytes_invalid=0 send_seq=1209796 receive_seq=1209796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1667 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123207 bytes_read=381388 bytes_retransmit=0 bytes_invalid=0 send_seq=20510 receive_seq=20510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001688 adj=50000526 sd_pos=3928496 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.20 cputime=5955.040 memavail=3265920 print_time=20142.263 buffer_time=2.426 print_stall=0 extruder: target=210 temp=209.5 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66108.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63624141 bytes_read=9767456 bytes_retransmit=9 bytes_invalid=0 send_seq=1209884 receive_seq=1209884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=894 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123213 bytes_read=381404 bytes_retransmit=0 bytes_invalid=0 send_seq=20511 receive_seq=20511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001684 adj=50000594 sd_pos=3928806 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.20 cputime=5955.176 memavail=3265680 print_time=20142.974 buffer_time=2.135 print_stall=0 extruder: target=210 temp=209.7 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66109.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63628006 bytes_read=9768062 bytes_retransmit=9 bytes_invalid=0 send_seq=1209959 receive_seq=1209959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=1871 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123219 bytes_read=381420 bytes_retransmit=0 bytes_invalid=0 send_seq=20512 receive_seq=20512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001680 adj=50000545 sd_pos=3929214 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.18 cputime=5955.403 memavail=3265428 print_time=20144.164 buffer_time=2.325 print_stall=0 extruder: target=210 temp=210.0 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66110.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63633790 bytes_read=9768799 bytes_retransmit=9 bytes_invalid=0 send_seq=1210066 receive_seq=1210066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1063 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123225 bytes_read=381436 bytes_retransmit=0 bytes_invalid=0 send_seq=20513 receive_seq=20513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001674 adj=50000553 sd_pos=3929343 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.18 cputime=5955.571 memavail=3265428 print_time=20145.063 buffer_time=2.210 print_stall=0 extruder: target=210 temp=210.1 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66111.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=63637813 bytes_read=9769390 bytes_retransmit=9 bytes_invalid=0 send_seq=1210142 receive_seq=1210142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1602 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123231 bytes_read=381465 bytes_retransmit=0 bytes_invalid=0 send_seq=20514 receive_seq=20514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001668 adj=50000478 sd_pos=3930056 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.18 cputime=5955.757 memavail=3265428 print_time=20146.081 buffer_time=2.227 print_stall=0 extruder: target=210 temp=210.4 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66112.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63643278 bytes_read=9770132 bytes_retransmit=9 bytes_invalid=0 send_seq=1210244 receive_seq=1210244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1420 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123237 bytes_read=381481 bytes_retransmit=0 bytes_invalid=0 send_seq=20515 receive_seq=20515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001663 adj=50000468 sd_pos=3930453 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.18 cputime=5956.016 memavail=3265428 print_time=20147.062 buffer_time=2.199 print_stall=0 extruder: target=210 temp=210.5 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66113.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63647459 bytes_read=9770689 bytes_retransmit=9 bytes_invalid=0 send_seq=1210315 receive_seq=1210315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1340 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123243 bytes_read=381497 bytes_retransmit=0 bytes_invalid=0 send_seq=20516 receive_seq=20516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001658 adj=50000453 sd_pos=3930868 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.18 cputime=5956.188 memavail=3270492 print_time=20148.047 buffer_time=2.183 print_stall=0 extruder: target=210 temp=210.6 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66114.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63653131 bytes_read=9771436 bytes_retransmit=9 bytes_invalid=0 send_seq=1210421 receive_seq=1210421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=475 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123249 bytes_read=381513 bytes_retransmit=0 bytes_invalid=0 send_seq=20517 receive_seq=20517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001652 adj=50000438 sd_pos=3930995 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.33 cputime=5956.359 memavail=3270308 print_time=20148.929 buffer_time=2.064 print_stall=0 extruder: target=210 temp=210.6 pwm=0.323
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66115.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63657122 bytes_read=9772032 bytes_retransmit=9 bytes_invalid=0 send_seq=1210497 receive_seq=1210497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=596 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123255 bytes_read=381529 bytes_retransmit=0 bytes_invalid=0 send_seq=20518 receive_seq=20518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001649 adj=50000394 sd_pos=3931675 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.33 cputime=5956.525 memavail=3269300 print_time=20149.920 buffer_time=2.054 print_stall=0 extruder: target=210 temp=210.5 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66116.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63662440 bytes_read=9772684 bytes_retransmit=9 bytes_invalid=0 send_seq=1210587 receive_seq=1210587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=807 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123261 bytes_read=381558 bytes_retransmit=0 bytes_invalid=0 send_seq=20519 receive_seq=20519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001645 adj=50000402 sd_pos=3932078 heater_bed: target=60 temp=59.9 pwm=0.323 sysload=0.33 cputime=5956.739 memavail=3268812 print_time=20151.076 buffer_time=2.193 print_stall=0 extruder: target=210 temp=210.4 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66117.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63666530 bytes_read=9773262 bytes_retransmit=9 bytes_invalid=0 send_seq=1210656 receive_seq=1210656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1302 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123267 bytes_read=381574 bytes_retransmit=0 bytes_invalid=0 send_seq=20520 receive_seq=20520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001640 adj=50000434 sd_pos=3932512 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.33 cputime=5956.923 memavail=3268560 print_time=20152.030 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.3 pwm=0.362
Stats 66118.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63671497 bytes_read=9773943 bytes_retransmit=9 bytes_invalid=0 send_seq=1210749 receive_seq=1210749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=394 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123273 bytes_read=381590 bytes_retransmit=0 bytes_invalid=0 send_seq=20521 receive_seq=20521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001637 adj=50000440 sd_pos=3932630 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.33 cputime=5957.208 memavail=3268568 print_time=20153.054 buffer_time=2.170 print_stall=0 extruder: target=210 temp=209.9 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66119.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63676392 bytes_read=9774605 bytes_retransmit=9 bytes_invalid=0 send_seq=1210841 receive_seq=1210841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=492 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123279 bytes_read=381606 bytes_retransmit=0 bytes_invalid=0 send_seq=20522 receive_seq=20522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001632 adj=50000459 sd_pos=3933417 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.30 cputime=5957.336 memavail=3266328 print_time=20153.925 buffer_time=2.039 print_stall=0 extruder: target=210 temp=209.8 pwm=0.420
Stats 66120.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63680218 bytes_read=9775202 bytes_retransmit=9 bytes_invalid=0 send_seq=1210917 receive_seq=1210917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1078 freq=400007575 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123285 bytes_read=381622 bytes_retransmit=0 bytes_invalid=0 send_seq=20523 receive_seq=20523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001628 adj=50000429 sd_pos=3933771 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.30 cputime=5957.567 memavail=3266328 print_time=20155.039 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.6 pwm=0.420
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66121.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63685872 bytes_read=9775936 bytes_retransmit=9 bytes_invalid=0 send_seq=1211021 receive_seq=1211021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=776 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123291 bytes_read=381651 bytes_retransmit=0 bytes_invalid=0 send_seq=20524 receive_seq=20524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001625 adj=50000458 sd_pos=3934129 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.30 cputime=5957.737 memavail=3266328 print_time=20156.049 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.4 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66122.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63689876 bytes_read=9776516 bytes_retransmit=9 bytes_invalid=0 send_seq=1211094 receive_seq=1211094 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1702 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123297 bytes_read=381667 bytes_retransmit=0 bytes_invalid=0 send_seq=20525 receive_seq=20525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001621 adj=50000472 sd_pos=3934809 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.30 cputime=5957.955 memavail=3266328 print_time=20157.302 buffer_time=2.413 print_stall=0 extruder: target=210 temp=209.3 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66123.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63695240 bytes_read=9777233 bytes_retransmit=9 bytes_invalid=0 send_seq=1211194 receive_seq=1211194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123303 bytes_read=381683 bytes_retransmit=0 bytes_invalid=0 send_seq=20526 receive_seq=20526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001616 adj=50000494 sd_pos=3935073 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.30 cputime=5958.122 memavail=3266328 print_time=20157.961 buffer_time=2.072 print_stall=0 extruder: target=210 temp=209.4 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66124.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63699122 bytes_read=9777829 bytes_retransmit=9 bytes_invalid=0 send_seq=1211270 receive_seq=1211270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1204 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123309 bytes_read=381699 bytes_retransmit=0 bytes_invalid=0 send_seq=20527 receive_seq=20527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001613 adj=50000438 sd_pos=3935580 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.28 cputime=5958.336 memavail=3266328 print_time=20159.222 buffer_time=2.332 print_stall=0 extruder: target=210 temp=209.5 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66125.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63703990 bytes_read=9778496 bytes_retransmit=9 bytes_invalid=0 send_seq=1211363 receive_seq=1211363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=421 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123315 bytes_read=381715 bytes_retransmit=0 bytes_invalid=0 send_seq=20528 receive_seq=20528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001609 adj=50000401 sd_pos=3935707 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.28 cputime=5958.461 memavail=3266088 print_time=20159.890 buffer_time=1.999 print_stall=0 extruder: target=210 temp=209.7 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66126.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63708031 bytes_read=9779093 bytes_retransmit=9 bytes_invalid=0 send_seq=1211439 receive_seq=1211439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1476 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123321 bytes_read=381744 bytes_retransmit=0 bytes_invalid=0 send_seq=20529 receive_seq=20529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001606 adj=50000366 sd_pos=3936419 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.28 cputime=5958.672 memavail=3265584 print_time=20161.126 buffer_time=2.235 print_stall=0 extruder: target=210 temp=209.9 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66127.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63713392 bytes_read=9779780 bytes_retransmit=9 bytes_invalid=0 send_seq=1211530 receive_seq=1211530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=1062 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123327 bytes_read=381760 bytes_retransmit=0 bytes_invalid=0 send_seq=20530 receive_seq=20530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001602 adj=50000395 sd_pos=3936774 heater_bed: target=60 temp=60.0 pwm=0.276 sysload=0.28 cputime=5958.849 memavail=3264576 print_time=20162.076 buffer_time=2.184 print_stall=0 extruder: target=210 temp=210.2 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66128.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63717270 bytes_read=9780307 bytes_retransmit=9 bytes_invalid=0 send_seq=1211595 receive_seq=1211595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1089 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123333 bytes_read=381776 bytes_retransmit=0 bytes_invalid=0 send_seq=20531 receive_seq=20531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001598 adj=50000381 sd_pos=3937188 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.28 cputime=5959.030 memavail=3264576 print_time=20163.056 buffer_time=2.163 print_stall=0 extruder: target=210 temp=210.5 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66129.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63722859 bytes_read=9781019 bytes_retransmit=9 bytes_invalid=0 send_seq=1211694 receive_seq=1211694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=598 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123339 bytes_read=381792 bytes_retransmit=0 bytes_invalid=0 send_seq=20532 receive_seq=20532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001596 adj=50000374 sd_pos=3937317 heater_bed: target=60 temp=60.0 pwm=0.264 sysload=0.26 cputime=5959.248 memavail=3264336 print_time=20163.974 buffer_time=2.080 print_stall=0 extruder: target=210 temp=210.6 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66130.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63726597 bytes_read=9781555 bytes_retransmit=9 bytes_invalid=0 send_seq=1211758 receive_seq=1211758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1066 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123345 bytes_read=381808 bytes_retransmit=0 bytes_invalid=0 send_seq=20533 receive_seq=20533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001598 adj=50000385 sd_pos=3937982 heater_bed: target=60 temp=60.0 pwm=0.167 sysload=0.26 cputime=5959.420 memavail=3264336 print_time=20164.961 buffer_time=2.067 print_stall=0 extruder: target=210 temp=210.7 pwm=0.344
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66131.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63732200 bytes_read=9782272 bytes_retransmit=9 bytes_invalid=0 send_seq=1211861 receive_seq=1211861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=246 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123351 bytes_read=381837 bytes_retransmit=0 bytes_invalid=0 send_seq=20534 receive_seq=20534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001593 adj=50000421 sd_pos=3938389 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.26 cputime=5959.627 memavail=3264336 print_time=20165.944 buffer_time=2.048 print_stall=0 extruder: target=210 temp=210.7 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66132.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63736635 bytes_read=9782877 bytes_retransmit=9 bytes_invalid=0 send_seq=1211936 receive_seq=1211936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2038 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123357 bytes_read=381853 bytes_retransmit=0 bytes_invalid=0 send_seq=20535 receive_seq=20535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001592 adj=50000323 sd_pos=3938884 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.26 cputime=5959.811 memavail=3264336 print_time=20167.159 buffer_time=2.263 print_stall=0 extruder: target=210 temp=210.7 pwm=0.330
Stats 66133.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63741322 bytes_read=9783536 bytes_retransmit=9 bytes_invalid=0 send_seq=1212025 receive_seq=1212025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=605 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123363 bytes_read=381869 bytes_retransmit=0 bytes_invalid=0 send_seq=20536 receive_seq=20536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001587 adj=50000393 sd_pos=3938985 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.26 cputime=5959.977 memavail=3264336 print_time=20167.937 buffer_time=2.040 print_stall=0 extruder: target=210 temp=210.5 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66134.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63746485 bytes_read=9784223 bytes_retransmit=9 bytes_invalid=0 send_seq=1212122 receive_seq=1212122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=871 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123369 bytes_read=381885 bytes_retransmit=0 bytes_invalid=0 send_seq=20537 receive_seq=20537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001583 adj=50000364 sd_pos=3939732 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.32 cputime=5960.196 memavail=3264336 print_time=20169.070 buffer_time=2.172 print_stall=0 extruder: target=210 temp=210.4 pwm=0.387
Stats 66135.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63750992 bytes_read=9784879 bytes_retransmit=9 bytes_invalid=0 send_seq=1212207 receive_seq=1212207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=758 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123375 bytes_read=381901 bytes_retransmit=0 bytes_invalid=0 send_seq=20538 receive_seq=20538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001578 adj=50000369 sd_pos=3940006 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.32 cputime=5960.422 memavail=3264336 print_time=20170.131 buffer_time=2.201 print_stall=0 extruder: target=210 temp=210.1 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66136.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=63756146 bytes_read=9785556 bytes_retransmit=9 bytes_invalid=0 send_seq=1212303 receive_seq=1212302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=975 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123387 bytes_read=381946 bytes_retransmit=0 bytes_invalid=0 send_seq=20540 receive_seq=20540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001574 adj=50000380 sd_pos=3940546 heater_bed: target=60 temp=60.0 pwm=0.198 sysload=0.32 cputime=5960.604 memavail=3264340 print_time=20171.173 buffer_time=2.223 print_stall=0 extruder: target=210 temp=209.8 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66137.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63760368 bytes_read=9786194 bytes_retransmit=9 bytes_invalid=0 send_seq=1212384 receive_seq=1212383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1321 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123393 bytes_read=381962 bytes_retransmit=0 bytes_invalid=0 send_seq=20541 receive_seq=20541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001574 adj=50000392 sd_pos=3941106 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.32 cputime=5960.818 memavail=3263836 print_time=20172.372 buffer_time=2.396 print_stall=0 extruder: target=210 temp=209.6 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66138.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63765507 bytes_read=9786906 bytes_retransmit=9 bytes_invalid=0 send_seq=1212480 receive_seq=1212480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=338 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123399 bytes_read=381978 bytes_retransmit=0 bytes_invalid=0 send_seq=20542 receive_seq=20542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001568 adj=50000430 sd_pos=3941368 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.32 cputime=5960.984 memavail=3263836 print_time=20173.173 buffer_time=2.196 print_stall=0 extruder: target=210 temp=209.5 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66139.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63769133 bytes_read=9787473 bytes_retransmit=9 bytes_invalid=0 send_seq=1212553 receive_seq=1212553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=473 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123405 bytes_read=381994 bytes_retransmit=0 bytes_invalid=0 send_seq=20543 receive_seq=20543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001563 adj=50000392 sd_pos=3941824 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.37 cputime=5961.201 memavail=3263336 print_time=20174.104 buffer_time=2.126 print_stall=0 extruder: target=210 temp=209.3 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66140.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63774392 bytes_read=9788185 bytes_retransmit=9 bytes_invalid=0 send_seq=1212652 receive_seq=1212652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=544 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123411 bytes_read=382010 bytes_retransmit=0 bytes_invalid=0 send_seq=20544 receive_seq=20544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001558 adj=50000365 sd_pos=3942049 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.37 cputime=5961.410 memavail=3263336 print_time=20175.218 buffer_time=2.209 print_stall=0 extruder: target=210 temp=209.4 pwm=0.446
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66141.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63778310 bytes_read=9788786 bytes_retransmit=9 bytes_invalid=0 send_seq=1212729 receive_seq=1212729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1607 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=123417 bytes_read=382039 bytes_retransmit=0 bytes_invalid=0 send_seq=20545 receive_seq=20545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001554 adj=50000379 sd_pos=3942830 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.37 cputime=5961.572 memavail=3263336 print_time=20176.255 buffer_time=2.246 print_stall=0 extruder: target=210 temp=209.4 pwm=0.442
Stats 66142.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63782941 bytes_read=9789444 bytes_retransmit=9 bytes_invalid=0 send_seq=1212817 receive_seq=1212817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=0 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=123423 bytes_read=382055 bytes_retransmit=0 bytes_invalid=0 send_seq=20546 receive_seq=20546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001550 adj=50000385 sd_pos=3943054 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.37 cputime=5961.737 memavail=3263340 print_time=20177.010 buffer_time=2.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.442
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66143.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63787737 bytes_read=9790106 bytes_retransmit=9 bytes_invalid=0 send_seq=1212907 receive_seq=1212907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=943 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=123429 bytes_read=382071 bytes_retransmit=0 bytes_invalid=0 send_seq=20547 receive_seq=20547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001548 adj=50000354 sd_pos=3943539 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.37 cputime=5961.914 memavail=3263340 print_time=20178.115 buffer_time=2.105 print_stall=0 extruder: target=210 temp=209.6 pwm=0.442
Stats 66144.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63791884 bytes_read=9790697 bytes_retransmit=9 bytes_invalid=0 send_seq=1212982 receive_seq=1212982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=727 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=123435 bytes_read=382087 bytes_retransmit=0 bytes_invalid=0 send_seq=20548 receive_seq=20548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001548 adj=50000393 sd_pos=3943641 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.34 cputime=5962.172 memavail=3263340 print_time=20179.144 buffer_time=2.133 print_stall=0 extruder: target=210 temp=209.8 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66145.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63797448 bytes_read=9791419 bytes_retransmit=9 bytes_invalid=0 send_seq=1213086 receive_seq=1213086 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=946 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=123441 bytes_read=382103 bytes_retransmit=0 bytes_invalid=0 send_seq=20549 receive_seq=20549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001544 adj=50000428 sd_pos=3944507 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.34 cputime=5962.341 memavail=3263340 print_time=20180.276 buffer_time=2.264 print_stall=0 extruder: target=210 temp=210.1 pwm=0.385
Stats 66146.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63801327 bytes_read=9792006 bytes_retransmit=9 bytes_invalid=0 send_seq=1213160 receive_seq=1213160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=210 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123447 bytes_read=382132 bytes_retransmit=0 bytes_invalid=0 send_seq=20550 receive_seq=20550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001539 adj=50000430 sd_pos=3944732 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.34 cputime=5962.510 memavail=3263340 print_time=20181.026 buffer_time=2.014 print_stall=0 extruder: target=210 temp=210.2 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66147.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63806462 bytes_read=9792683 bytes_retransmit=9 bytes_invalid=0 send_seq=1213249 receive_seq=1213249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=521 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123453 bytes_read=382148 bytes_retransmit=0 bytes_invalid=0 send_seq=20551 receive_seq=20551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001534 adj=50000368 sd_pos=3945128 heater_bed: target=60 temp=60.0 pwm=0.066 sysload=0.34 cputime=5962.682 memavail=3263340 print_time=20182.138 buffer_time=2.125 print_stall=0 extruder: target=210 temp=210.4 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66148.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63810437 bytes_read=9793260 bytes_retransmit=9 bytes_invalid=0 send_seq=1213324 receive_seq=1213324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=1775 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123459 bytes_read=382164 bytes_retransmit=0 bytes_invalid=0 send_seq=20552 receive_seq=20552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001529 adj=50000360 sd_pos=3945840 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.34 cputime=5962.914 memavail=3263340 print_time=20183.410 buffer_time=2.396 print_stall=0 extruder: target=210 temp=210.5 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66149.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63815665 bytes_read=9793967 bytes_retransmit=9 bytes_invalid=0 send_seq=1213422 receive_seq=1213422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1465 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123465 bytes_read=382180 bytes_retransmit=0 bytes_invalid=0 send_seq=20553 receive_seq=20553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001526 adj=50000380 sd_pos=3946179 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.47 cputime=5963.119 memavail=3263348 print_time=20184.367 buffer_time=2.352 print_stall=0 extruder: target=210 temp=210.5 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66150.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63819712 bytes_read=9794578 bytes_retransmit=9 bytes_invalid=0 send_seq=1213501 receive_seq=1213501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1333 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123471 bytes_read=382196 bytes_retransmit=0 bytes_invalid=0 send_seq=20554 receive_seq=20554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001522 adj=50000390 sd_pos=3946626 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.47 cputime=5963.304 memavail=3263348 print_time=20185.315 buffer_time=2.300 print_stall=0 extruder: target=210 temp=210.4 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66151.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63825046 bytes_read=9795280 bytes_retransmit=9 bytes_invalid=0 send_seq=1213601 receive_seq=1213601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=752 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=123477 bytes_read=382212 bytes_retransmit=0 bytes_invalid=0 send_seq=20555 receive_seq=20555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001518 adj=50000368 sd_pos=3946853 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.47 cputime=5963.481 memavail=3263348 print_time=20186.218 buffer_time=2.198 print_stall=0 extruder: target=210 temp=210.2 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66152.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63828941 bytes_read=9795878 bytes_retransmit=9 bytes_invalid=0 send_seq=1213674 receive_seq=1213674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=298 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123483 bytes_read=382240 bytes_retransmit=0 bytes_invalid=0 send_seq=20556 receive_seq=20556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001516 adj=50000363 sd_pos=3947598 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.47 cputime=5963.656 memavail=3262344 print_time=20187.126 buffer_time=2.105 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66153.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63834083 bytes_read=9796553 bytes_retransmit=9 bytes_invalid=0 send_seq=1213766 receive_seq=1213766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=4921 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123489 bytes_read=382255 bytes_retransmit=0 bytes_invalid=0 send_seq=20557 receive_seq=20557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001510 adj=50000365 sd_pos=3954274 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.47 cputime=5963.770 memavail=3261840 print_time=20188.404 buffer_time=2.382 print_stall=0 extruder: target=210 temp=209.9 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66154.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63837979 bytes_read=9797090 bytes_retransmit=9 bytes_invalid=0 send_seq=1213834 receive_seq=1213834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=6439 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123495 bytes_read=382270 bytes_retransmit=0 bytes_invalid=0 send_seq=20558 receive_seq=20558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001505 adj=50000387 sd_pos=3955629 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.44 cputime=5963.888 memavail=3261600 print_time=20189.200 buffer_time=2.177 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
Stats 66155.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63845898 bytes_read=9797997 bytes_retransmit=9 bytes_invalid=0 send_seq=1213972 receive_seq=1213972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3244 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123501 bytes_read=382285 bytes_retransmit=0 bytes_invalid=0 send_seq=20559 receive_seq=20559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001503 adj=50000315 sd_pos=3955872 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.44 cputime=5964.177 memavail=3266164 print_time=20190.248 buffer_time=2.225 print_stall=0 extruder: target=210 temp=209.6 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66156.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=63853342 bytes_read=9798883 bytes_retransmit=9 bytes_invalid=0 send_seq=1214106 receive_seq=1214106 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1188 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123507 bytes_read=382300 bytes_retransmit=0 bytes_invalid=0 send_seq=20560 receive_seq=20560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001500 adj=50000310 sd_pos=3956380 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.44 cputime=5964.344 memavail=3265408 print_time=20191.199 buffer_time=2.175 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66157.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63857527 bytes_read=9799506 bytes_retransmit=9 bytes_invalid=0 send_seq=1214187 receive_seq=1214187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=362 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123513 bytes_read=382329 bytes_retransmit=0 bytes_invalid=0 send_seq=20561 receive_seq=20561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001495 adj=50000302 sd_pos=3956712 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.44 cputime=5964.522 memavail=3264400 print_time=20192.009 buffer_time=1.979 print_stall=0 extruder: target=210 temp=209.6 pwm=0.432
Stats 66158.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63862959 bytes_read=9800237 bytes_retransmit=9 bytes_invalid=0 send_seq=1214287 receive_seq=1214287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=832 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123519 bytes_read=382345 bytes_retransmit=0 bytes_invalid=0 send_seq=20562 receive_seq=20562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001494 adj=50000265 sd_pos=3956781 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.44 cputime=5964.788 memavail=3264400 print_time=20193.185 buffer_time=2.155 print_stall=0 extruder: target=210 temp=209.7 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66159.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63867033 bytes_read=9800834 bytes_retransmit=9 bytes_invalid=0 send_seq=1214366 receive_seq=1214366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2276 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123525 bytes_read=382361 bytes_retransmit=0 bytes_invalid=0 send_seq=20563 receive_seq=20563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001489 adj=50000328 sd_pos=3957609 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.48 cputime=5964.965 memavail=3263160 print_time=20194.122 buffer_time=2.091 print_stall=0 extruder: target=210 temp=209.9 pwm=0.361
Stats 66160.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63872295 bytes_read=9801526 bytes_retransmit=9 bytes_invalid=0 send_seq=1214464 receive_seq=1214464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1159 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123531 bytes_read=382377 bytes_retransmit=0 bytes_invalid=0 send_seq=20564 receive_seq=20564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001486 adj=50000320 sd_pos=3957944 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.48 cputime=5965.230 memavail=3263160 print_time=20195.109 buffer_time=2.077 print_stall=0 extruder: target=210 temp=210.1 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66161.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63878242 bytes_read=9802307 bytes_retransmit=9 bytes_invalid=0 send_seq=1214574 receive_seq=1214574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=1105 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123537 bytes_read=382393 bytes_retransmit=0 bytes_invalid=0 send_seq=20565 receive_seq=20565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001482 adj=50000275 sd_pos=3958373 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.48 cputime=5965.410 memavail=3262672 print_time=20196.186 buffer_time=2.154 print_stall=0 extruder: target=210 temp=210.2 pwm=0.361
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66162.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63882217 bytes_read=9802860 bytes_retransmit=9 bytes_invalid=0 send_seq=1214641 receive_seq=1214641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1467 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123543 bytes_read=382422 bytes_retransmit=0 bytes_invalid=0 send_seq=20566 receive_seq=20566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001477 adj=50000280 sd_pos=3958711 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.48 cputime=5965.617 memavail=3262672 print_time=20197.273 buffer_time=2.239 print_stall=0 extruder: target=210 temp=210.4 pwm=0.361
Stats 66163.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63887633 bytes_read=9803567 bytes_retransmit=9 bytes_invalid=0 send_seq=1214742 receive_seq=1214742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=482 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123549 bytes_read=382438 bytes_retransmit=0 bytes_invalid=0 send_seq=20567 receive_seq=20567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001472 adj=50000285 sd_pos=3958751 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.48 cputime=5965.837 memavail=3262672 print_time=20198.070 buffer_time=2.036 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66164.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63891783 bytes_read=9804194 bytes_retransmit=9 bytes_invalid=0 send_seq=1214822 receive_seq=1214822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=3343 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123555 bytes_read=382454 bytes_retransmit=0 bytes_invalid=0 send_seq=20568 receive_seq=20568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001466 adj=50000250 sd_pos=3959768 heater_bed: target=60 temp=60.0 pwm=0.143 sysload=0.44 cputime=5966.057 memavail=3262672 print_time=20199.345 buffer_time=2.308 print_stall=0 extruder: target=210 temp=210.5 pwm=0.360
Stats 66165.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63897109 bytes_read=9804870 bytes_retransmit=9 bytes_invalid=0 send_seq=1214917 receive_seq=1214917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=1088 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123561 bytes_read=382470 bytes_retransmit=0 bytes_invalid=0 send_seq=20569 receive_seq=20569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001465 adj=50000272 sd_pos=3959988 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.44 cputime=5966.268 memavail=3262672 print_time=20200.047 buffer_time=2.010 print_stall=0 extruder: target=210 temp=210.5 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66166.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63903109 bytes_read=9805597 bytes_retransmit=9 bytes_invalid=0 send_seq=1215022 receive_seq=1215022 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=559 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123567 bytes_read=382486 bytes_retransmit=0 bytes_invalid=0 send_seq=20570 receive_seq=20570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001460 adj=50000266 sd_pos=3960384 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.44 cputime=5966.461 memavail=3267164 print_time=20201.117 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66167.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63907232 bytes_read=9806219 bytes_retransmit=9 bytes_invalid=0 send_seq=1215097 receive_seq=1215097 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1042 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123573 bytes_read=382515 bytes_retransmit=0 bytes_invalid=0 send_seq=20571 receive_seq=20571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001460 adj=50000217 sd_pos=3960710 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.44 cputime=5966.691 memavail=3266188 print_time=20202.240 buffer_time=2.201 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66168.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63912430 bytes_read=9806901 bytes_retransmit=9 bytes_invalid=0 send_seq=1215193 receive_seq=1215193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1948 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123579 bytes_read=382531 bytes_retransmit=0 bytes_invalid=0 send_seq=20572 receive_seq=20572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001455 adj=50000276 sd_pos=3961396 heater_bed: target=60 temp=60.0 pwm=0.280 sysload=0.44 cputime=5966.970 memavail=3266188 print_time=20203.419 buffer_time=2.354 print_stall=0 extruder: target=210 temp=210.3 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66169.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63916206 bytes_read=9807488 bytes_retransmit=9 bytes_invalid=0 send_seq=1215267 receive_seq=1215267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=2029 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123585 bytes_read=382547 bytes_retransmit=0 bytes_invalid=0 send_seq=20573 receive_seq=20573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001451 adj=50000289 sd_pos=3961690 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.41 cputime=5967.101 memavail=3264684 print_time=20204.075 buffer_time=2.009 print_stall=0 extruder: target=210 temp=210.1 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66170.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63921564 bytes_read=9808204 bytes_retransmit=9 bytes_invalid=0 send_seq=1215367 receive_seq=1215367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=1504 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123591 bytes_read=382563 bytes_retransmit=0 bytes_invalid=0 send_seq=20574 receive_seq=20574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001449 adj=50000238 sd_pos=3962219 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.41 cputime=5967.374 memavail=3264684 print_time=20205.285 buffer_time=2.218 print_stall=0 extruder: target=210 temp=209.9 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66171.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63927399 bytes_read=9808891 bytes_retransmit=9 bytes_invalid=0 send_seq=1215464 receive_seq=1215464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=402 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123597 bytes_read=382579 bytes_retransmit=0 bytes_invalid=0 send_seq=20575 receive_seq=20575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001445 adj=50000288 sd_pos=3963928 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.41 cputime=5967.436 memavail=3264196 print_time=20206.183 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.7 pwm=0.427
Stats 66172.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63931167 bytes_read=9809484 bytes_retransmit=9 bytes_invalid=0 send_seq=1215536 receive_seq=1215536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123603 bytes_read=382608 bytes_retransmit=0 bytes_invalid=0 send_seq=20576 receive_seq=20576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001442 adj=50000268 sd_pos=3966182 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.41 cputime=5967.489 memavail=3263972 print_time=20207.184 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.6 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66173.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63936210 bytes_read=9810175 bytes_retransmit=9 bytes_invalid=0 send_seq=1215631 receive_seq=1215631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123609 bytes_read=382624 bytes_retransmit=0 bytes_invalid=0 send_seq=20577 receive_seq=20577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001437 adj=50000275 sd_pos=3966706 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.41 cputime=5967.726 memavail=3263972 print_time=20208.192 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.5 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66174.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63939911 bytes_read=9810697 bytes_retransmit=9 bytes_invalid=0 send_seq=1215695 receive_seq=1215695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=3301 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123615 bytes_read=382640 bytes_retransmit=0 bytes_invalid=0 send_seq=20578 receive_seq=20578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001433 adj=50000255 sd_pos=3967619 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.45 cputime=5967.928 memavail=3263972 print_time=20209.379 buffer_time=2.240 print_stall=0 extruder: target=210 temp=209.4 pwm=0.432
Stats 66175.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63945001 bytes_read=9811398 bytes_retransmit=9 bytes_invalid=0 send_seq=1215790 receive_seq=1215790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1998 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123621 bytes_read=382656 bytes_retransmit=0 bytes_invalid=0 send_seq=20579 receive_seq=20579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001432 adj=50000273 sd_pos=3967916 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.45 cputime=5968.113 memavail=3263972 print_time=20210.253 buffer_time=2.114 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66176.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63951488 bytes_read=9812160 bytes_retransmit=9 bytes_invalid=0 send_seq=1215902 receive_seq=1215902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=1065 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123627 bytes_read=382672 bytes_retransmit=0 bytes_invalid=0 send_seq=20580 receive_seq=20580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001427 adj=50000287 sd_pos=3969043 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.45 cputime=5968.262 memavail=3263972 print_time=20211.283 buffer_time=2.143 print_stall=0 extruder: target=210 temp=209.6 pwm=0.432
Stats 66177.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63955689 bytes_read=9812783 bytes_retransmit=9 bytes_invalid=0 send_seq=1215983 receive_seq=1215983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123633 bytes_read=382701 bytes_retransmit=0 bytes_invalid=0 send_seq=20581 receive_seq=20581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001423 adj=50000284 sd_pos=3970605 heater_bed: target=60 temp=60.0 pwm=0.095 sysload=0.45 cputime=5968.309 memavail=3263980 print_time=20212.289 buffer_time=2.149 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66178.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63959002 bytes_read=9813349 bytes_retransmit=9 bytes_invalid=0 send_seq=1216050 receive_seq=1216050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123639 bytes_read=382717 bytes_retransmit=0 bytes_invalid=0 send_seq=20582 receive_seq=20582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001419 adj=50000258 sd_pos=3972409 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.45 cputime=5968.354 memavail=3263224 print_time=20213.391 buffer_time=2.250 print_stall=0 extruder: target=210 temp=209.9 pwm=0.370
Stats 66179.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63962175 bytes_read=9813871 bytes_retransmit=9 bytes_invalid=0 send_seq=1216114 receive_seq=1216114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123645 bytes_read=382733 bytes_retransmit=0 bytes_invalid=0 send_seq=20583 receive_seq=20583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001414 adj=50000275 sd_pos=3972498 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.42 cputime=5968.491 memavail=3262480 print_time=20214.148 buffer_time=2.008 print_stall=0 extruder: target=210 temp=210.0 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66180.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63966833 bytes_read=9814518 bytes_retransmit=9 bytes_invalid=0 send_seq=1216203 receive_seq=1216203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123651 bytes_read=382749 bytes_retransmit=0 bytes_invalid=0 send_seq=20584 receive_seq=20584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001410 adj=50000220 sd_pos=3973277 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.42 cputime=5968.654 memavail=3262480 print_time=20215.300 buffer_time=2.159 print_stall=0 extruder: target=210 temp=210.1 pwm=0.370
Stats 66181.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=63971071 bytes_read=9815164 bytes_retransmit=9 bytes_invalid=0 send_seq=1216286 receive_seq=1216286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2370 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123657 bytes_read=382765 bytes_retransmit=0 bytes_invalid=0 send_seq=20585 receive_seq=20585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001407 adj=50000222 sd_pos=3977276 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.42 cputime=5968.784 memavail=3262480 print_time=20216.343 buffer_time=2.200 print_stall=0 extruder: target=210 temp=210.2 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66182.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=63974944 bytes_read=9815702 bytes_retransmit=9 bytes_invalid=0 send_seq=1216350 receive_seq=1216350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3329 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123663 bytes_read=382794 bytes_retransmit=0 bytes_invalid=0 send_seq=20586 receive_seq=20586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001402 adj=50000263 sd_pos=3977816 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.42 cputime=5968.991 memavail=3265784 print_time=20217.366 buffer_time=2.209 print_stall=0 extruder: target=210 temp=210.3 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66183.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=63981586 bytes_read=9816489 bytes_retransmit=9 bytes_invalid=0 send_seq=1216464 receive_seq=1216464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=527 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123669 bytes_read=382810 bytes_retransmit=0 bytes_invalid=0 send_seq=20587 receive_seq=20587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001397 adj=50000229 sd_pos=3978159 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.42 cputime=5969.150 memavail=3270088 print_time=20218.190 buffer_time=2.032 print_stall=0 extruder: target=210 temp=210.3 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66184.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=63986584 bytes_read=9817175 bytes_retransmit=9 bytes_invalid=0 send_seq=1216558 receive_seq=1216558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2434 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123675 bytes_read=382826 bytes_retransmit=0 bytes_invalid=0 send_seq=20588 receive_seq=20588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001393 adj=50000154 sd_pos=3981868 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.38 cputime=5969.228 memavail=3269912 print_time=20219.302 buffer_time=2.142 print_stall=0 extruder: target=210 temp=210.2 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66185.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=63990974 bytes_read=9817752 bytes_retransmit=9 bytes_invalid=0 send_seq=1216633 receive_seq=1216633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=2716 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123681 bytes_read=382842 bytes_retransmit=0 bytes_invalid=0 send_seq=20589 receive_seq=20589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001392 adj=50000172 sd_pos=3983811 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.38 cputime=5969.284 memavail=3269664 print_time=20220.394 buffer_time=2.234 print_stall=0 extruder: target=210 temp=210.1 pwm=0.421
Stats 66186.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=63996947 bytes_read=9818449 bytes_retransmit=9 bytes_invalid=0 send_seq=1216742 receive_seq=1216730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=123687 bytes_read=382858 bytes_retransmit=0 bytes_invalid=0 send_seq=20590 receive_seq=20590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001388 adj=50000163 sd_pos=3985347 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.38 cputime=5969.338 memavail=3269664 print_time=20221.406 buffer_time=2.243 print_stall=0 extruder: target=210 temp=209.9 pwm=0.421
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66187.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64001001 bytes_read=9819146 bytes_retransmit=9 bytes_invalid=0 send_seq=1216823 receive_seq=1216823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=123693 bytes_read=382887 bytes_retransmit=0 bytes_invalid=0 send_seq=20591 receive_seq=20591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001389 adj=50000122 sd_pos=3987146 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.38 cputime=5969.423 memavail=3269664 print_time=20222.304 buffer_time=2.141 print_stall=0 extruder: target=210 temp=209.6 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66188.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64005214 bytes_read=9819758 bytes_retransmit=9 bytes_invalid=0 send_seq=1216905 receive_seq=1216905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3204 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=123699 bytes_read=382903 bytes_retransmit=0 bytes_invalid=0 send_seq=20592 receive_seq=20592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001388 adj=49999908 sd_pos=3991084 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.38 cputime=5969.563 memavail=3268936 print_time=20223.466 buffer_time=2.280 print_stall=0 extruder: target=210 temp=209.4 pwm=0.473
Stats 66189.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64009192 bytes_read=9820335 bytes_retransmit=9 bytes_invalid=0 send_seq=1216977 receive_seq=1216977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=3265 freq=400007813 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=123705 bytes_read=382919 bytes_retransmit=0 bytes_invalid=0 send_seq=20593 receive_seq=20593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001388 adj=50000065 sd_pos=3991259 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.35 cputime=5969.784 memavail=3268684 print_time=20224.277 buffer_time=2.090 print_stall=0 extruder: target=210 temp=209.3 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66190.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64016126 bytes_read=9821181 bytes_retransmit=9 bytes_invalid=0 send_seq=1217103 receive_seq=1217103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3349 freq=400007799 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=123711 bytes_read=382935 bytes_retransmit=0 bytes_invalid=0 send_seq=20594 receive_seq=20594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001384 adj=50000104 sd_pos=3992731 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.35 cputime=5969.979 memavail=3268684 print_time=20225.586 buffer_time=2.387 print_stall=0 extruder: target=210 temp=209.3 pwm=0.473
Stats 66191.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64021337 bytes_read=9821838 bytes_retransmit=9 bytes_invalid=0 send_seq=1217194 receive_seq=1217194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2517 freq=400007781 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=123717 bytes_read=382951 bytes_retransmit=0 bytes_invalid=0 send_seq=20595 receive_seq=20595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001379 adj=50000179 sd_pos=3995592 heater_bed: target=60 temp=60.0 pwm=0.244 sysload=0.35 cputime=5970.044 memavail=3268180 print_time=20226.340 buffer_time=2.140 print_stall=0 extruder: target=210 temp=209.4 pwm=0.417
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66192.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64025954 bytes_read=9822476 bytes_retransmit=9 bytes_invalid=0 send_seq=1217275 receive_seq=1217275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2546 freq=400007770 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=123723 bytes_read=382980 bytes_retransmit=0 bytes_invalid=0 send_seq=20596 receive_seq=20596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001374 adj=50000148 sd_pos=3997412 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.35 cputime=5970.101 memavail=3267940 print_time=20227.427 buffer_time=2.226 print_stall=0 extruder: target=210 temp=209.5 pwm=0.417
Stats 66193.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64031756 bytes_read=9823227 bytes_retransmit=9 bytes_invalid=0 send_seq=1217382 receive_seq=1217382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=123729 bytes_read=382996 bytes_retransmit=0 bytes_invalid=0 send_seq=20597 receive_seq=20597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001368 adj=50000165 sd_pos=3999041 heater_bed: target=60 temp=60.0 pwm=0.084 sysload=0.35 cputime=5970.150 memavail=3267940 print_time=20228.448 buffer_time=2.246 print_stall=0 extruder: target=210 temp=209.9 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66194.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64035336 bytes_read=9823779 bytes_retransmit=9 bytes_invalid=0 send_seq=1217452 receive_seq=1217452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=123735 bytes_read=383012 bytes_retransmit=0 bytes_invalid=0 send_seq=20598 receive_seq=20598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001364 adj=50000158 sd_pos=4000190 heater_bed: target=60 temp=60.0 pwm=0.301 sysload=0.33 cputime=5970.314 memavail=3267940 print_time=20229.313 buffer_time=2.110 print_stall=0 extruder: target=210 temp=210.1 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66195.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64039933 bytes_read=9824436 bytes_retransmit=9 bytes_invalid=0 send_seq=1217540 receive_seq=1217540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1532 freq=400007731 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=123741 bytes_read=383028 bytes_retransmit=0 bytes_invalid=0 send_seq=20599 receive_seq=20599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001359 adj=50000144 sd_pos=4000966 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.33 cputime=5970.566 memavail=3265920 print_time=20230.501 buffer_time=2.299 print_stall=0 extruder: target=210 temp=210.2 pwm=0.360
Stats 66196.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64043755 bytes_read=9825020 bytes_retransmit=9 bytes_invalid=0 send_seq=1217614 receive_seq=1217614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2678 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=123747 bytes_read=383044 bytes_retransmit=0 bytes_invalid=0 send_seq=20600 receive_seq=20600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001355 adj=50000186 sd_pos=4003877 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.33 cputime=5970.627 memavail=3265164 print_time=20231.285 buffer_time=2.081 print_stall=0 extruder: target=210 temp=210.4 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66197.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64048517 bytes_read=9825685 bytes_retransmit=9 bytes_invalid=0 send_seq=1217704 receive_seq=1217704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3853 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123753 bytes_read=383073 bytes_retransmit=0 bytes_invalid=0 send_seq=20601 receive_seq=20601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001350 adj=50000168 sd_pos=4005278 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.33 cputime=5970.805 memavail=3265164 print_time=20232.407 buffer_time=2.203 print_stall=0 extruder: target=210 temp=210.5 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66198.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64055321 bytes_read=9826517 bytes_retransmit=9 bytes_invalid=0 send_seq=1217827 receive_seq=1217827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=838 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123759 bytes_read=383089 bytes_retransmit=0 bytes_invalid=0 send_seq=20602 receive_seq=20602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001345 adj=50000193 sd_pos=4005758 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.33 cputime=5970.991 memavail=3264952 print_time=20233.302 buffer_time=2.097 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
Stats 66199.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64060896 bytes_read=9827238 bytes_retransmit=9 bytes_invalid=0 send_seq=1217928 receive_seq=1217928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1888 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123765 bytes_read=383105 bytes_retransmit=0 bytes_invalid=0 send_seq=20603 receive_seq=20603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001341 adj=50000155 sd_pos=4009527 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.30 cputime=5971.079 memavail=3264952 print_time=20234.345 buffer_time=2.139 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66200.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64064562 bytes_read=9827816 bytes_retransmit=9 bytes_invalid=0 send_seq=1218001 receive_seq=1218001 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=2666 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123777 bytes_read=383137 bytes_retransmit=0 bytes_invalid=0 send_seq=20605 receive_seq=20605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001343 adj=50000171 sd_pos=4011429 heater_bed: target=60 temp=60.0 pwm=0.097 sysload=0.30 cputime=5971.186 memavail=3264952 print_time=20235.444 buffer_time=2.237 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
Stats 66201.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64069905 bytes_read=9828528 bytes_retransmit=9 bytes_invalid=0 send_seq=1218100 receive_seq=1218100 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123783 bytes_read=383153 bytes_retransmit=0 bytes_invalid=0 send_seq=20606 receive_seq=20606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001345 adj=50000260 sd_pos=4012649 heater_bed: target=60 temp=60.0 pwm=0.140 sysload=0.30 cputime=5971.270 memavail=3264952 print_time=20236.214 buffer_time=2.006 print_stall=0 extruder: target=210 temp=210.3 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66202.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64074269 bytes_read=9829180 bytes_retransmit=9 bytes_invalid=0 send_seq=1218184 receive_seq=1218184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=123789 bytes_read=383182 bytes_retransmit=0 bytes_invalid=0 send_seq=20607 receive_seq=20607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001343 adj=50000229 sd_pos=4014134 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.30 cputime=5971.426 memavail=3264952 print_time=20237.330 buffer_time=2.122 print_stall=0 extruder: target=210 temp=210.1 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66203.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64078820 bytes_read=9829827 bytes_retransmit=9 bytes_invalid=0 send_seq=1218273 receive_seq=1218273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=999 freq=400007735 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=123795 bytes_read=383198 bytes_retransmit=0 bytes_invalid=0 send_seq=20608 receive_seq=20608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001341 adj=50000226 sd_pos=4014797 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.30 cputime=5971.692 memavail=3264704 print_time=20238.422 buffer_time=2.213 print_stall=0 extruder: target=210 temp=209.8 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66204.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64082712 bytes_read=9830424 bytes_retransmit=9 bytes_invalid=0 send_seq=1218349 receive_seq=1218349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=3512 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=123801 bytes_read=383214 bytes_retransmit=0 bytes_invalid=0 send_seq=20609 receive_seq=20609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001336 adj=50000221 sd_pos=4017801 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.27 cputime=5971.760 memavail=3264704 print_time=20239.348 buffer_time=2.138 print_stall=0 extruder: target=210 temp=209.6 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66205.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64087711 bytes_read=9831110 bytes_retransmit=9 bytes_invalid=0 send_seq=1218443 receive_seq=1218443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4430 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=123807 bytes_read=383230 bytes_retransmit=0 bytes_invalid=0 send_seq=20610 receive_seq=20610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001331 adj=50000184 sd_pos=4019226 heater_bed: target=60 temp=60.0 pwm=0.020 sysload=0.27 cputime=5971.939 memavail=3264704 print_time=20240.471 buffer_time=2.239 print_stall=0 extruder: target=210 temp=209.5 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66206.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64094843 bytes_read=9831957 bytes_retransmit=9 bytes_invalid=0 send_seq=1218572 receive_seq=1218572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=725 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=123813 bytes_read=383246 bytes_retransmit=0 bytes_invalid=0 send_seq=20611 receive_seq=20611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001328 adj=50000182 sd_pos=4019573 heater_bed: target=60 temp=60.0 pwm=0.145 sysload=0.27 cputime=5972.113 memavail=3264704 print_time=20241.298 buffer_time=2.066 print_stall=0 extruder: target=210 temp=209.4 pwm=0.451
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66207.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64100458 bytes_read=9832718 bytes_retransmit=9 bytes_invalid=0 send_seq=1218676 receive_seq=1218676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1148 freq=400007715 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123819 bytes_read=383275 bytes_retransmit=0 bytes_invalid=0 send_seq=20612 receive_seq=20612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001322 adj=50000150 sd_pos=4022612 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.27 cputime=5972.188 memavail=3264216 print_time=20242.250 buffer_time=2.017 print_stall=0 extruder: target=210 temp=209.4 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66208.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64104201 bytes_read=9833285 bytes_retransmit=9 bytes_invalid=0 send_seq=1218749 receive_seq=1218749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2883 freq=400007725 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123825 bytes_read=383291 bytes_retransmit=0 bytes_invalid=0 send_seq=20613 receive_seq=20613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001323 adj=50000141 sd_pos=4025463 heater_bed: target=60 temp=60.0 pwm=0.054 sysload=0.27 cputime=5972.314 memavail=3264220 print_time=20243.340 buffer_time=2.106 print_stall=0 extruder: target=210 temp=209.5 pwm=0.448
Stats 66209.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64110568 bytes_read=9834072 bytes_retransmit=9 bytes_invalid=0 send_seq=1218866 receive_seq=1218866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123831 bytes_read=383307 bytes_retransmit=0 bytes_invalid=0 send_seq=20614 receive_seq=20614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001326 adj=50000192 sd_pos=4027473 heater_bed: target=60 temp=60.0 pwm=0.303 sysload=0.41 cputime=5972.426 memavail=3263724 print_time=20244.388 buffer_time=2.153 print_stall=0 extruder: target=210 temp=209.6 pwm=0.448
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66210.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64114887 bytes_read=9834728 bytes_retransmit=9 bytes_invalid=0 send_seq=1218951 receive_seq=1218951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=0 freq=400007732 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123837 bytes_read=383323 bytes_retransmit=0 bytes_invalid=0 send_seq=20615 receive_seq=20615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001328 adj=50000255 sd_pos=4029329 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.41 cputime=5972.544 memavail=3263724 print_time=20245.536 buffer_time=2.294 print_stall=0 extruder: target=210 temp=209.8 pwm=0.396
Stats 66211.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64117339 bytes_read=9835195 bytes_retransmit=9 bytes_invalid=0 send_seq=1219004 receive_seq=1219004 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123843 bytes_read=383339 bytes_retransmit=0 bytes_invalid=0 send_seq=20616 receive_seq=20616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001324 adj=50000304 sd_pos=4029329 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.41 cputime=5972.669 memavail=3263724 print_time=20246.287 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.9 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66212.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64121635 bytes_read=9835828 bytes_retransmit=9 bytes_invalid=0 send_seq=1219087 receive_seq=1219087 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007946 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=123849 bytes_read=383368 bytes_retransmit=0 bytes_invalid=0 send_seq=20617 receive_seq=20617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001320 adj=50000205 sd_pos=4030125 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.41 cputime=5972.828 memavail=3263484 print_time=20247.426 buffer_time=2.183 print_stall=0 extruder: target=210 temp=210.1 pwm=0.396
Stats 66213.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64126056 bytes_read=9836484 bytes_retransmit=9 bytes_invalid=0 send_seq=1219172 receive_seq=1219172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2124 freq=400007916 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=123855 bytes_read=383384 bytes_retransmit=0 bytes_invalid=0 send_seq=20618 receive_seq=20618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001314 adj=49999920 sd_pos=4034016 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.41 cputime=5972.897 memavail=3262476 print_time=20248.482 buffer_time=2.239 print_stall=0 extruder: target=210 temp=210.3 pwm=0.396
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66214.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64129321 bytes_read=9836996 bytes_retransmit=9 bytes_invalid=0 send_seq=1219234 receive_seq=1219234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3393 freq=400007908 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=123861 bytes_read=383400 bytes_retransmit=0 bytes_invalid=0 send_seq=20619 receive_seq=20619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001310 adj=49999983 sd_pos=4034301 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.38 cputime=5973.068 memavail=3262476 print_time=20249.342 buffer_time=2.097 print_stall=0 extruder: target=210 temp=210.3 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66215.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64136189 bytes_read=9837828 bytes_retransmit=9 bytes_invalid=0 send_seq=1219360 receive_seq=1219360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=788 freq=400007874 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=123867 bytes_read=383416 bytes_retransmit=0 bytes_invalid=0 send_seq=20620 receive_seq=20620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001304 adj=49999967 sd_pos=4034733 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.38 cputime=5973.250 memavail=3262476 print_time=20250.292 buffer_time=2.046 print_stall=0 extruder: target=210 temp=210.5 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66216.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64141623 bytes_read=9838544 bytes_retransmit=9 bytes_invalid=0 send_seq=1219457 receive_seq=1219457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3219 freq=400007892 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=123873 bytes_read=383432 bytes_retransmit=0 bytes_invalid=0 send_seq=20621 receive_seq=20621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001302 adj=50000007 sd_pos=4039037 heater_bed: target=60 temp=60.0 pwm=0.196 sysload=0.38 cputime=5973.409 memavail=3262476 print_time=20251.474 buffer_time=2.228 print_stall=0 extruder: target=210 temp=210.5 pwm=0.353
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66217.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64145771 bytes_read=9839152 bytes_retransmit=9 bytes_invalid=0 send_seq=1219535 receive_seq=1219535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=3122 freq=400007869 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123879 bytes_read=383461 bytes_retransmit=0 bytes_invalid=0 send_seq=20622 receive_seq=20622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001301 adj=50000044 sd_pos=4040776 heater_bed: target=60 temp=60.0 pwm=0.217 sysload=0.38 cputime=5973.505 memavail=3262476 print_time=20252.308 buffer_time=2.060 print_stall=0 extruder: target=210 temp=210.4 pwm=0.353
Stats 66218.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64152247 bytes_read=9839953 bytes_retransmit=9 bytes_invalid=0 send_seq=1219653 receive_seq=1219653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=400007895 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123885 bytes_read=383477 bytes_retransmit=0 bytes_invalid=0 send_seq=20623 receive_seq=20623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001299 adj=50000099 sd_pos=4042608 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.38 cputime=5973.606 memavail=3261980 print_time=20253.342 buffer_time=2.093 print_stall=0 extruder: target=210 temp=210.2 pwm=0.404
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66219.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64156554 bytes_read=9840579 bytes_retransmit=9 bytes_invalid=0 send_seq=1219735 receive_seq=1219735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=0 freq=400007890 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123891 bytes_read=383493 bytes_retransmit=0 bytes_invalid=0 send_seq=20624 receive_seq=20624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001293 adj=50000070 sd_pos=4044495 heater_bed: target=60 temp=60.0 pwm=0.208 sysload=0.35 cputime=5973.669 memavail=3266492 print_time=20254.482 buffer_time=2.232 print_stall=0 extruder: target=210 temp=210.0 pwm=0.404
Stats 66220.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64160847 bytes_read=9841191 bytes_retransmit=9 bytes_invalid=0 send_seq=1219817 receive_seq=1219817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007875 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123897 bytes_read=383509 bytes_retransmit=0 bytes_invalid=0 send_seq=20625 receive_seq=20625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001288 adj=50000077 sd_pos=4044495 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.35 cputime=5973.868 memavail=3263720 print_time=20255.328 buffer_time=2.078 print_stall=0 extruder: target=210 temp=209.8 pwm=0.458
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66221.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64163888 bytes_read=9841668 bytes_retransmit=9 bytes_invalid=0 send_seq=1219869 receive_seq=1219869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2382 freq=400007845 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123903 bytes_read=383525 bytes_retransmit=0 bytes_invalid=0 send_seq=20626 receive_seq=20626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001284 adj=50000063 sd_pos=4044854 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.35 cputime=5974.061 memavail=3263720 print_time=20256.261 buffer_time=2.009 print_stall=0 extruder: target=210 temp=209.7 pwm=0.458
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66222.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64169419 bytes_read=9842395 bytes_retransmit=9 bytes_invalid=0 send_seq=1219968 receive_seq=1219968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2262 freq=400007837 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123909 bytes_read=383554 bytes_retransmit=0 bytes_invalid=0 send_seq=20627 receive_seq=20627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001279 adj=50000091 sd_pos=4045421 heater_bed: target=60 temp=60.0 pwm=0.282 sysload=0.35 cputime=5974.318 memavail=3263720 print_time=20257.364 buffer_time=2.111 print_stall=0 extruder: target=210 temp=209.6 pwm=0.458
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66223.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64175419 bytes_read=9843152 bytes_retransmit=9 bytes_invalid=0 send_seq=1220079 receive_seq=1220079 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=3983 freq=400007820 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123915 bytes_read=383570 bytes_retransmit=0 bytes_invalid=0 send_seq=20628 receive_seq=20628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001276 adj=50000098 sd_pos=4049447 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.35 cputime=5974.402 memavail=3263236 print_time=20258.508 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66224.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64180135 bytes_read=9843814 bytes_retransmit=9 bytes_invalid=0 send_seq=1220168 receive_seq=1220168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=3950 freq=400007795 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123921 bytes_read=383586 bytes_retransmit=0 bytes_invalid=0 send_seq=20629 receive_seq=20629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001270 adj=50000134 sd_pos=4050040 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.32 cputime=5974.608 memavail=3263236 print_time=20259.376 buffer_time=2.122 print_stall=0 extruder: target=210 temp=209.7 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66225.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64187297 bytes_read=9844675 bytes_retransmit=9 bytes_invalid=0 send_seq=1220297 receive_seq=1220297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=844 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123927 bytes_read=383602 bytes_retransmit=0 bytes_invalid=0 send_seq=20630 receive_seq=20630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001265 adj=50000120 sd_pos=4050300 heater_bed: target=60 temp=60.0 pwm=0.010 sysload=0.32 cputime=5974.803 memavail=3262984 print_time=20260.311 buffer_time=2.056 print_stall=0 extruder: target=210 temp=209.9 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66226.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64192911 bytes_read=9845362 bytes_retransmit=9 bytes_invalid=0 send_seq=1220394 receive_seq=1220394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=2041 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=123933 bytes_read=383618 bytes_retransmit=0 bytes_invalid=0 send_seq=20631 receive_seq=20631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001260 adj=50000111 sd_pos=4053830 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.32 cputime=5974.882 memavail=3262984 print_time=20261.418 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.9 pwm=0.408
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66227.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64196728 bytes_read=9845965 bytes_retransmit=9 bytes_invalid=0 send_seq=1220468 receive_seq=1220468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2627 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123939 bytes_read=383647 bytes_retransmit=0 bytes_invalid=0 send_seq=20632 receive_seq=20632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001256 adj=50000124 sd_pos=4055868 heater_bed: target=60 temp=60.0 pwm=0.309 sysload=0.32 cputime=5974.938 memavail=3262984 print_time=20262.276 buffer_time=2.019 print_stall=0 extruder: target=210 temp=210.1 pwm=0.408
Stats 66228.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64202781 bytes_read=9846734 bytes_retransmit=9 bytes_invalid=0 send_seq=1220579 receive_seq=1220579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007744 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123945 bytes_read=383663 bytes_retransmit=0 bytes_invalid=0 send_seq=20633 receive_seq=20633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001252 adj=50000102 sd_pos=4057613 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.32 cputime=5974.991 memavail=3263748 print_time=20263.313 buffer_time=2.056 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66229.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64206732 bytes_read=9847328 bytes_retransmit=9 bytes_invalid=0 send_seq=1220658 receive_seq=1220658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=0 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123951 bytes_read=383679 bytes_retransmit=0 bytes_invalid=0 send_seq=20634 receive_seq=20634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001252 adj=50000099 sd_pos=4059649 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.29 cputime=5975.070 memavail=3263748 print_time=20264.534 buffer_time=2.277 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
Stats 66230.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64210418 bytes_read=9847915 bytes_retransmit=9 bytes_invalid=0 send_seq=1220732 receive_seq=1220732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=0 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123957 bytes_read=383695 bytes_retransmit=0 bytes_invalid=0 send_seq=20635 receive_seq=20635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001248 adj=50000191 sd_pos=4059649 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.29 cputime=5975.259 memavail=3263748 print_time=20265.309 buffer_time=2.051 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66231.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64214585 bytes_read=9848536 bytes_retransmit=9 bytes_invalid=0 send_seq=1220813 receive_seq=1220813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=504 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=123963 bytes_read=383711 bytes_retransmit=0 bytes_invalid=0 send_seq=20636 receive_seq=20636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001244 adj=50000155 sd_pos=4060005 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.29 cputime=5975.448 memavail=3267496 print_time=20266.366 buffer_time=2.107 print_stall=0 extruder: target=210 temp=210.1 pwm=0.375
Stats 66232.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64219251 bytes_read=9849199 bytes_retransmit=9 bytes_invalid=0 send_seq=1220902 receive_seq=1220902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=647 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123969 bytes_read=383740 bytes_retransmit=0 bytes_invalid=0 send_seq=20637 receive_seq=20637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001240 adj=50000147 sd_pos=4060048 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.29 cputime=5975.663 memavail=3267524 print_time=20267.479 buffer_time=2.203 print_stall=0 extruder: target=210 temp=210.0 pwm=0.417
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66233.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64223826 bytes_read=9849841 bytes_retransmit=9 bytes_invalid=0 send_seq=1220987 receive_seq=1220987 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1408 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123975 bytes_read=383756 bytes_retransmit=0 bytes_invalid=0 send_seq=20638 receive_seq=20638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001237 adj=50000142 sd_pos=4061628 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.29 cputime=5975.791 memavail=3267524 print_time=20268.424 buffer_time=2.147 print_stall=0 extruder: target=210 temp=210.0 pwm=0.417
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66234.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64228067 bytes_read=9850452 bytes_retransmit=9 bytes_invalid=0 send_seq=1221066 receive_seq=1221066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4040 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123981 bytes_read=383772 bytes_retransmit=0 bytes_invalid=0 send_seq=20639 receive_seq=20639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001233 adj=50000129 sd_pos=4064912 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.59 cputime=5975.896 memavail=3267524 print_time=20269.531 buffer_time=2.255 print_stall=0 extruder: target=210 temp=209.9 pwm=0.417
Stats 66235.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64233302 bytes_read=9851114 bytes_retransmit=9 bytes_invalid=0 send_seq=1221158 receive_seq=1221158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=2166 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123987 bytes_read=383788 bytes_retransmit=0 bytes_invalid=0 send_seq=20640 receive_seq=20640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001231 adj=50000123 sd_pos=4065034 heater_bed: target=60 temp=60.0 pwm=0.364 sysload=0.59 cputime=5976.108 memavail=3267284 print_time=20270.329 buffer_time=2.051 print_stall=0 extruder: target=210 temp=209.8 pwm=0.417
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66236.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=64239937 bytes_read=9851936 bytes_retransmit=9 bytes_invalid=0 send_seq=1221279 receive_seq=1221279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2463 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=123993 bytes_read=383804 bytes_retransmit=0 bytes_invalid=0 send_seq=20641 receive_seq=20641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001227 adj=50000087 sd_pos=4066830 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.59 cputime=5976.279 memavail=3267284 print_time=20271.598 buffer_time=2.319 print_stall=0 extruder: target=210 temp=209.8 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66237.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64244383 bytes_read=9852548 bytes_retransmit=9 bytes_invalid=0 send_seq=1221355 receive_seq=1221355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=3323 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=123999 bytes_read=383833 bytes_retransmit=0 bytes_invalid=0 send_seq=20642 receive_seq=20642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001222 adj=50000134 sd_pos=4069875 heater_bed: target=60 temp=60.0 pwm=0.123 sysload=0.59 cputime=5976.346 memavail=3267284 print_time=20272.461 buffer_time=2.183 print_stall=0 extruder: target=210 temp=209.7 pwm=0.419
Stats 66238.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64249711 bytes_read=9853230 bytes_retransmit=9 bytes_invalid=0 send_seq=1221451 receive_seq=1221451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1874 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124005 bytes_read=383848 bytes_retransmit=0 bytes_invalid=0 send_seq=20643 receive_seq=20643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001218 adj=50000100 sd_pos=4071579 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.59 cputime=5976.399 memavail=3266036 print_time=20273.479 buffer_time=2.199 print_stall=0 extruder: target=210 temp=209.7 pwm=0.419
Stats 66239.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64254837 bytes_read=9853924 bytes_retransmit=9 bytes_invalid=0 send_seq=1221547 receive_seq=1221547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124011 bytes_read=383863 bytes_retransmit=0 bytes_invalid=0 send_seq=20644 receive_seq=20644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001214 adj=50000090 sd_pos=4073245 heater_bed: target=60 temp=60.0 pwm=0.160 sysload=0.54 cputime=5976.446 memavail=3265548 print_time=20274.506 buffer_time=2.227 print_stall=0 extruder: target=210 temp=209.7 pwm=0.470
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66240.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64260516 bytes_read=9854683 bytes_retransmit=9 bytes_invalid=0 send_seq=1221656 receive_seq=1221656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=8427 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124017 bytes_read=383878 bytes_retransmit=0 bytes_invalid=0 send_seq=20645 receive_seq=20645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001210 adj=50000085 sd_pos=4076342 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.54 cputime=5976.592 memavail=3265548 print_time=20276.351 buffer_time=3.062 print_stall=0 extruder: target=210 temp=209.7 pwm=0.419
Stats 66241.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=64263678 bytes_read=9855190 bytes_retransmit=9 bytes_invalid=0 send_seq=1221717 receive_seq=1221717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=5765 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124023 bytes_read=383893 bytes_retransmit=0 bytes_invalid=0 send_seq=20646 receive_seq=20646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001206 adj=50000164 sd_pos=4076342 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.54 cputime=5976.622 memavail=3265548 print_time=20276.351 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.7 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66242.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64268352 bytes_read=9855858 bytes_retransmit=9 bytes_invalid=0 send_seq=1221804 receive_seq=1221804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=19122 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124029 bytes_read=383921 bytes_retransmit=0 bytes_invalid=0 send_seq=20647 receive_seq=20647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001201 adj=50000138 sd_pos=4079330 heater_bed: target=60 temp=60.0 pwm=0.258 sysload=0.54 cputime=5976.734 memavail=3265548 print_time=20278.055 buffer_time=2.765 print_stall=0 extruder: target=210 temp=209.8 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66243.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64279226 bytes_read=9856999 bytes_retransmit=9 bytes_invalid=0 send_seq=1221989 receive_seq=1221989 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=28626 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124035 bytes_read=383937 bytes_retransmit=0 bytes_invalid=0 send_seq=20648 receive_seq=20648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001197 adj=50000131 sd_pos=4082650 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.54 cputime=5976.851 memavail=3265548 print_time=20279.821 buffer_time=3.530 print_stall=0 extruder: target=210 temp=210.0 pwm=0.419
Stats 66244.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64290284 bytes_read=9858156 bytes_retransmit=9 bytes_invalid=0 send_seq=1222180 receive_seq=1222180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=18667 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124041 bytes_read=383953 bytes_retransmit=0 bytes_invalid=0 send_seq=20649 receive_seq=20649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001193 adj=50000145 sd_pos=4082650 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.50 cputime=5976.898 memavail=3265548 print_time=20279.821 buffer_time=2.529 print_stall=0 extruder: target=210 temp=210.2 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66245.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64302333 bytes_read=9859408 bytes_retransmit=9 bytes_invalid=0 send_seq=1222387 receive_seq=1222387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=22995 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124047 bytes_read=383969 bytes_retransmit=0 bytes_invalid=0 send_seq=20650 receive_seq=20650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001190 adj=50000127 sd_pos=4085392 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.50 cputime=5977.016 memavail=3265548 print_time=20281.291 buffer_time=2.998 print_stall=0 extruder: target=210 temp=210.4 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66247.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64315165 bytes_read=9860734 bytes_retransmit=9 bytes_invalid=0 send_seq=1222609 receive_seq=1222609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=11441 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124053 bytes_read=383985 bytes_retransmit=0 bytes_invalid=0 send_seq=20651 receive_seq=20651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001191 adj=50000097 sd_pos=4087798 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.50 cputime=5977.164 memavail=3265548 print_time=20281.291 buffer_time=1.944 print_stall=0 extruder: target=210 temp=210.7 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66248.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64326644 bytes_read=9861947 bytes_retransmit=9 bytes_invalid=0 send_seq=1222808 receive_seq=1222808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=18155 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124059 bytes_read=384014 bytes_retransmit=0 bytes_invalid=0 send_seq=20652 receive_seq=20652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001188 adj=50000111 sd_pos=4088741 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.50 cputime=5977.263 memavail=3265548 print_time=20282.922 buffer_time=2.574 print_stall=0 extruder: target=210 temp=211.0 pwm=0.283
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66249.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64338252 bytes_read=9863183 bytes_retransmit=9 bytes_invalid=0 send_seq=1223009 receive_seq=1223009 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=24071 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124065 bytes_read=384030 bytes_retransmit=0 bytes_invalid=0 send_seq=20653 receive_seq=20653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001184 adj=50000089 sd_pos=4091596 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.46 cputime=5977.369 memavail=3264824 print_time=20284.503 buffer_time=3.155 print_stall=0 extruder: target=210 temp=211.4 pwm=0.283
Stats 66250.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64350072 bytes_read=9864405 bytes_retransmit=9 bytes_invalid=0 send_seq=1223213 receive_seq=1223213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=13437 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124071 bytes_read=384046 bytes_retransmit=0 bytes_invalid=0 send_seq=20654 receive_seq=20654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001180 adj=50000108 sd_pos=4091596 heater_bed: target=60 temp=60.0 pwm=0.294 sysload=0.46 cputime=5977.418 memavail=3264836 print_time=20284.503 buffer_time=2.154 print_stall=0 extruder: target=210 temp=211.5 pwm=0.283
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66251.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64361587 bytes_read=9865617 bytes_retransmit=9 bytes_invalid=0 send_seq=1223413 receive_seq=1223413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=10129 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124077 bytes_read=384062 bytes_retransmit=0 bytes_invalid=0 send_seq=20655 receive_seq=20655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001177 adj=50000075 sd_pos=4092383 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.46 cputime=5977.599 memavail=3264836 print_time=20285.435 buffer_time=2.085 print_stall=0 extruder: target=210 temp=211.7 pwm=0.231
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66252.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64372825 bytes_read=9866803 bytes_retransmit=9 bytes_invalid=0 send_seq=1223607 receive_seq=1223607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=6003 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124083 bytes_read=384078 bytes_retransmit=0 bytes_invalid=0 send_seq=20656 receive_seq=20656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001174 adj=50000041 sd_pos=4092760 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.46 cputime=5977.916 memavail=3263324 print_time=20286.426 buffer_time=2.075 print_stall=0 extruder: target=210 temp=211.7 pwm=0.231
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66253.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64381183 bytes_read=9867756 bytes_retransmit=9 bytes_invalid=0 send_seq=1223754 receive_seq=1223754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=5186 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124089 bytes_read=384107 bytes_retransmit=0 bytes_invalid=0 send_seq=20657 receive_seq=20657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001172 adj=50000013 sd_pos=4093402 heater_bed: target=60 temp=60.0 pwm=0.127 sysload=0.46 cputime=5978.346 memavail=3262316 print_time=20287.588 buffer_time=2.236 print_stall=0 extruder: target=210 temp=211.7 pwm=0.231
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66254.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64388026 bytes_read=9868563 bytes_retransmit=9 bytes_invalid=0 send_seq=1223872 receive_seq=1223872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=4817 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124095 bytes_read=384123 bytes_retransmit=0 bytes_invalid=0 send_seq=20658 receive_seq=20658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001168 adj=50000005 sd_pos=4096418 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.42 cputime=5978.424 memavail=3262092 print_time=20288.532 buffer_time=2.179 print_stall=0 extruder: target=210 temp=211.5 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66255.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64394268 bytes_read=9869314 bytes_retransmit=9 bytes_invalid=0 send_seq=1223979 receive_seq=1223979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3885 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124101 bytes_read=384139 bytes_retransmit=0 bytes_invalid=0 send_seq=20659 receive_seq=20659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001165 adj=50000003 sd_pos=4097766 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.42 cputime=5978.560 memavail=3261340 print_time=20289.401 buffer_time=2.047 print_stall=0 extruder: target=210 temp=211.1 pwm=0.291
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66256.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64401070 bytes_read=9870136 bytes_retransmit=9 bytes_invalid=0 send_seq=1224103 receive_seq=1224103 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1918 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124107 bytes_read=384155 bytes_retransmit=0 bytes_invalid=0 send_seq=20660 receive_seq=20660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001162 adj=49999985 sd_pos=4098069 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.42 cputime=5978.788 memavail=3262080 print_time=20290.566 buffer_time=2.212 print_stall=0 extruder: target=210 temp=210.6 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66257.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64407388 bytes_read=9870928 bytes_retransmit=9 bytes_invalid=0 send_seq=1224218 receive_seq=1224218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1246 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124113 bytes_read=384171 bytes_retransmit=0 bytes_invalid=0 send_seq=20661 receive_seq=20661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001158 adj=50000029 sd_pos=4100542 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.42 cputime=5978.857 memavail=3265996 print_time=20291.421 buffer_time=2.066 print_stall=0 extruder: target=210 temp=210.1 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66258.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64411209 bytes_read=9871525 bytes_retransmit=9 bytes_invalid=0 send_seq=1224291 receive_seq=1224291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3465 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124119 bytes_read=384200 bytes_retransmit=0 bytes_invalid=0 send_seq=20662 receive_seq=20662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001154 adj=49999995 sd_pos=4103464 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.42 cputime=5978.969 memavail=3266008 print_time=20292.534 buffer_time=2.178 print_stall=0 extruder: target=210 temp=209.3 pwm=0.530
Stats 66259.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64417422 bytes_read=9872297 bytes_retransmit=9 bytes_invalid=0 send_seq=1224405 receive_seq=1224405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=512 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124125 bytes_read=384216 bytes_retransmit=0 bytes_invalid=0 send_seq=20663 receive_seq=20663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001153 adj=49999993 sd_pos=4105019 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.39 cputime=5979.065 memavail=3265032 print_time=20293.549 buffer_time=2.192 print_stall=0 extruder: target=210 temp=208.9 pwm=0.530
Stats 66260.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64420899 bytes_read=9872859 bytes_retransmit=9 bytes_invalid=0 send_seq=1224474 receive_seq=1224474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124131 bytes_read=384232 bytes_retransmit=0 bytes_invalid=0 send_seq=20664 receive_seq=20664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001166 adj=50000022 sd_pos=4106618 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.39 cputime=5979.127 memavail=3264788 print_time=20294.564 buffer_time=2.206 print_stall=0 extruder: target=210 temp=208.4 pwm=0.590
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66261.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64426751 bytes_read=9873619 bytes_retransmit=9 bytes_invalid=0 send_seq=1224583 receive_seq=1224583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=8537 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124137 bytes_read=384248 bytes_retransmit=0 bytes_invalid=0 send_seq=20665 receive_seq=20665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001175 adj=50000173 sd_pos=4109281 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.39 cputime=5979.279 memavail=3264792 print_time=20296.093 buffer_time=2.735 print_stall=0 extruder: target=210 temp=208.2 pwm=0.590
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66262.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64429839 bytes_read=9874122 bytes_retransmit=9 bytes_invalid=0 send_seq=1224644 receive_seq=1224644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=23061 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124143 bytes_read=384264 bytes_retransmit=0 bytes_invalid=0 send_seq=20666 receive_seq=20666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001171 adj=50000264 sd_pos=4112385 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.39 cputime=5979.377 memavail=3264792 print_time=20297.775 buffer_time=3.416 print_stall=0 extruder: target=210 temp=208.2 pwm=0.509
Stats 66263.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64437936 bytes_read=9875080 bytes_retransmit=9 bytes_invalid=0 send_seq=1224789 receive_seq=1224789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=15826 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=124149 bytes_read=384293 bytes_retransmit=0 bytes_invalid=0 send_seq=20667 receive_seq=20667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001166 adj=50000223 sd_pos=4112385 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.39 cputime=5979.417 memavail=3264792 print_time=20297.775 buffer_time=2.415 print_stall=0 extruder: target=210 temp=208.4 pwm=0.509
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66264.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64449301 bytes_read=9876291 bytes_retransmit=9 bytes_invalid=0 send_seq=1224988 receive_seq=1224988 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20071 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=124155 bytes_read=384309 bytes_retransmit=0 bytes_invalid=0 send_seq=20668 receive_seq=20668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001162 adj=50000204 sd_pos=4114890 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.36 cputime=5979.532 memavail=3264796 print_time=20299.226 buffer_time=2.866 print_stall=0 extruder: target=210 temp=209.0 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66265.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64460609 bytes_read=9877479 bytes_retransmit=9 bytes_invalid=0 send_seq=1225183 receive_seq=1225183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=26786 freq=400007598 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=124167 bytes_read=384341 bytes_retransmit=0 bytes_invalid=0 send_seq=20670 receive_seq=20670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001154 adj=50000181 sd_pos=4118032 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.36 cputime=5979.653 memavail=3264796 print_time=20300.870 buffer_time=3.509 print_stall=0 extruder: target=210 temp=209.5 pwm=0.324
Stats 66266.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64471716 bytes_read=9878676 bytes_retransmit=9 bytes_invalid=0 send_seq=1225379 receive_seq=1225379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=16839 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=124173 bytes_read=384357 bytes_retransmit=0 bytes_invalid=0 send_seq=20671 receive_seq=20671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001151 adj=50000119 sd_pos=4118032 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.36 cputime=5979.727 memavail=3264800 print_time=20300.870 buffer_time=2.508 print_stall=0 extruder: target=210 temp=210.1 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66267.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64483013 bytes_read=9879877 bytes_retransmit=9 bytes_invalid=0 send_seq=1225576 receive_seq=1225576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=24108 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=124179 bytes_read=384373 bytes_retransmit=0 bytes_invalid=0 send_seq=20672 receive_seq=20672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001147 adj=50000102 sd_pos=4121030 heater_bed: target=60 temp=60.0 pwm=0.370 sysload=0.36 cputime=5979.927 memavail=3264800 print_time=20302.568 buffer_time=3.205 print_stall=0 extruder: target=210 temp=210.9 pwm=0.201
Stats 66268.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64494466 bytes_read=9881095 bytes_retransmit=9 bytes_invalid=0 send_seq=1225776 receive_seq=1225776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=13799 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124185 bytes_read=384402 bytes_retransmit=0 bytes_invalid=0 send_seq=20673 receive_seq=20673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001145 adj=50000079 sd_pos=4121030 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.36 cputime=5979.976 memavail=3264800 print_time=20302.568 buffer_time=2.204 print_stall=0 extruder: target=210 temp=211.4 pwm=0.201
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66269.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64505971 bytes_read=9882317 bytes_retransmit=9 bytes_invalid=0 send_seq=1225977 receive_seq=1225977 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=19035 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124191 bytes_read=384418 bytes_retransmit=0 bytes_invalid=0 send_seq=20674 receive_seq=20674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001143 adj=50000062 sd_pos=4123856 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.33 cputime=5980.095 memavail=3264788 print_time=20304.147 buffer_time=2.783 print_stall=0 extruder: target=210 temp=211.7 pwm=0.148
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66270.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64517264 bytes_read=9883498 bytes_retransmit=9 bytes_invalid=0 send_seq=1226170 receive_seq=1226170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=22817 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124197 bytes_read=384434 bytes_retransmit=0 bytes_invalid=0 send_seq=20675 receive_seq=20675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001141 adj=50000061 sd_pos=4126137 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.33 cputime=5980.209 memavail=3264788 print_time=20305.561 buffer_time=3.196 print_stall=0 extruder: target=210 temp=212.0 pwm=0.148
Stats 66271.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64528421 bytes_read=9884680 bytes_retransmit=9 bytes_invalid=0 send_seq=1226366 receive_seq=1226366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=12822 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124203 bytes_read=384450 bytes_retransmit=0 bytes_invalid=0 send_seq=20676 receive_seq=20676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001143 adj=50000076 sd_pos=4126137 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.33 cputime=5980.256 memavail=3264788 print_time=20305.561 buffer_time=2.196 print_stall=0 extruder: target=210 temp=211.8 pwm=0.225
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66272.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64539387 bytes_read=9885853 bytes_retransmit=9 bytes_invalid=0 send_seq=1226558 receive_seq=1226558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=8580 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124209 bytes_read=384466 bytes_retransmit=0 bytes_invalid=0 send_seq=20677 receive_seq=20677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001146 adj=50000099 sd_pos=4126422 heater_bed: target=60 temp=60.0 pwm=0.205 sysload=0.33 cputime=5980.604 memavail=3264792 print_time=20306.429 buffer_time=2.064 print_stall=0 extruder: target=210 temp=211.6 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66273.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64549857 bytes_read=9886953 bytes_retransmit=9 bytes_invalid=0 send_seq=1226732 receive_seq=1226732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4709 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124215 bytes_read=384495 bytes_retransmit=0 bytes_invalid=0 send_seq=20678 receive_seq=20678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001140 adj=50000102 sd_pos=4126730 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.33 cputime=5980.884 memavail=3264304 print_time=20307.384 buffer_time=2.018 print_stall=0 extruder: target=210 temp=211.1 pwm=0.332
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66274.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64557360 bytes_read=9887825 bytes_retransmit=9 bytes_invalid=0 send_seq=1226866 receive_seq=1226866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4996 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124221 bytes_read=384511 bytes_retransmit=0 bytes_invalid=0 send_seq=20679 receive_seq=20679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001134 adj=50000034 sd_pos=4128363 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.30 cputime=5981.160 memavail=3263548 print_time=20308.602 buffer_time=2.236 print_stall=0 extruder: target=210 temp=210.5 pwm=0.383
Stats 66275.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64563798 bytes_read=9888632 bytes_retransmit=9 bytes_invalid=0 send_seq=1226984 receive_seq=1226984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3276 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124227 bytes_read=384527 bytes_retransmit=0 bytes_invalid=0 send_seq=20680 receive_seq=20680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001129 adj=49999991 sd_pos=4131283 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.30 cputime=5981.232 memavail=3263044 print_time=20309.367 buffer_time=2.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66276.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64570316 bytes_read=9889438 bytes_retransmit=9 bytes_invalid=0 send_seq=1227102 receive_seq=1227102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=2510 freq=400007603 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124233 bytes_read=384543 bytes_retransmit=0 bytes_invalid=0 send_seq=20681 receive_seq=20681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001123 adj=49999928 sd_pos=4131688 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.30 cputime=5981.452 memavail=3263788 print_time=20310.502 buffer_time=2.134 print_stall=0 extruder: target=210 temp=209.6 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66277.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64576628 bytes_read=9890170 bytes_retransmit=9 bytes_invalid=0 send_seq=1227208 receive_seq=1227208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=2433 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124239 bytes_read=384559 bytes_retransmit=0 bytes_invalid=0 send_seq=20682 receive_seq=20682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001117 adj=49999935 sd_pos=4133005 heater_bed: target=60 temp=60.0 pwm=0.258 sysload=0.30 cputime=5981.602 memavail=3263804 print_time=20311.620 buffer_time=2.252 print_stall=0 extruder: target=210 temp=209.1 pwm=0.501
Stats 66278.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64581482 bytes_read=9890828 bytes_retransmit=9 bytes_invalid=0 send_seq=1227293 receive_seq=1227293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2312 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=124245 bytes_read=384588 bytes_retransmit=0 bytes_invalid=0 send_seq=20683 receive_seq=20683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001115 adj=49999920 sd_pos=4135814 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.30 cputime=5981.736 memavail=3263804 print_time=20312.389 buffer_time=2.020 print_stall=0 extruder: target=210 temp=208.9 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66279.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64586523 bytes_read=9891519 bytes_retransmit=9 bytes_invalid=0 send_seq=1227388 receive_seq=1227388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=2050 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=124251 bytes_read=384604 bytes_retransmit=0 bytes_invalid=0 send_seq=20684 receive_seq=20684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001114 adj=49999883 sd_pos=4137817 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.28 cputime=5981.846 memavail=3263804 print_time=20313.494 buffer_time=2.125 print_stall=0 extruder: target=210 temp=208.5 pwm=0.501
Stats 66280.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64591729 bytes_read=9892206 bytes_retransmit=9 bytes_invalid=0 send_seq=1227485 receive_seq=1227485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=0 freq=400007745 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=124257 bytes_read=384620 bytes_retransmit=0 bytes_invalid=0 send_seq=20685 receive_seq=20685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001111 adj=49999933 sd_pos=4139385 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.28 cputime=5981.932 memavail=3263804 print_time=20314.514 buffer_time=2.145 print_stall=0 extruder: target=210 temp=208.3 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66281.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64597619 bytes_read=9892968 bytes_retransmit=9 bytes_invalid=0 send_seq=1227594 receive_seq=1227594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=481 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=124263 bytes_read=384636 bytes_retransmit=0 bytes_invalid=0 send_seq=20686 receive_seq=20686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001105 adj=49999754 sd_pos=4141190 heater_bed: target=60 temp=60.0 pwm=0.035 sysload=0.28 cputime=5982.035 memavail=3263804 print_time=20315.743 buffer_time=2.373 print_stall=0 extruder: target=210 temp=208.3 pwm=0.503
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66282.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64600694 bytes_read=9893494 bytes_retransmit=9 bytes_invalid=0 send_seq=1227656 receive_seq=1227656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=11851 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=124269 bytes_read=384652 bytes_retransmit=0 bytes_invalid=0 send_seq=20687 receive_seq=20687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001100 adj=49999813 sd_pos=4143620 heater_bed: target=60 temp=60.0 pwm=0.292 sysload=0.28 cputime=5982.128 memavail=3263808 print_time=20317.137 buffer_time=2.766 print_stall=0 extruder: target=210 temp=208.6 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66283.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64604433 bytes_read=9894077 bytes_retransmit=9 bytes_invalid=0 send_seq=1227730 receive_seq=1227730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=21252 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=124275 bytes_read=384681 bytes_retransmit=0 bytes_invalid=0 send_seq=20688 receive_seq=20688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001098 adj=49999879 sd_pos=4145832 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.28 cputime=5982.218 memavail=3263808 print_time=20318.461 buffer_time=3.090 print_stall=0 extruder: target=210 temp=208.8 pwm=0.452
Stats 66284.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64615339 bytes_read=9895244 bytes_retransmit=9 bytes_invalid=0 send_seq=1227920 receive_seq=1227920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=11494 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=124281 bytes_read=384697 bytes_retransmit=0 bytes_invalid=0 send_seq=20689 receive_seq=20689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001093 adj=49999929 sd_pos=4145832 heater_bed: target=60 temp=60.0 pwm=0.035 sysload=0.26 cputime=5982.266 memavail=3263808 print_time=20318.461 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.1 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66285.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64626617 bytes_read=9896395 bytes_retransmit=9 bytes_invalid=0 send_seq=1228107 receive_seq=1228107 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=9278 freq=400007723 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=124287 bytes_read=384713 bytes_retransmit=0 bytes_invalid=0 send_seq=20690 receive_seq=20690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001090 adj=49999895 sd_pos=4146425 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.26 cputime=5982.670 memavail=3263304 print_time=20319.741 buffer_time=2.291 print_stall=0 extruder: target=210 temp=209.7 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66286.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64637156 bytes_read=9897482 bytes_retransmit=9 bytes_invalid=0 send_seq=1228281 receive_seq=1228281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=4760 freq=400007735 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=124293 bytes_read=384729 bytes_retransmit=0 bytes_invalid=0 send_seq=20691 receive_seq=20691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001087 adj=49999876 sd_pos=4146546 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.26 cputime=5983.020 memavail=3263304 print_time=20320.621 buffer_time=2.168 print_stall=0 extruder: target=210 temp=210.1 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66287.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64643813 bytes_read=9898303 bytes_retransmit=9 bytes_invalid=0 send_seq=1228402 receive_seq=1228402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=18150 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=124299 bytes_read=384745 bytes_retransmit=0 bytes_invalid=0 send_seq=20692 receive_seq=20692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001082 adj=49999814 sd_pos=4149445 heater_bed: target=60 temp=60.0 pwm=0.210 sysload=0.26 cputime=5983.221 memavail=3263304 print_time=20322.678 buffer_time=3.225 print_stall=0 extruder: target=210 temp=210.7 pwm=0.280
Stats 66288.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64650823 bytes_read=9899156 bytes_retransmit=9 bytes_invalid=0 send_seq=1228529 receive_seq=1228529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=11952 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124305 bytes_read=384774 bytes_retransmit=0 bytes_invalid=0 send_seq=20693 receive_seq=20693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001078 adj=49999969 sd_pos=4149445 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.26 cputime=5983.264 memavail=3263304 print_time=20322.678 buffer_time=2.224 print_stall=0 extruder: target=210 temp=211.0 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66289.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64659986 bytes_read=9900188 bytes_retransmit=9 bytes_invalid=0 send_seq=1228692 receive_seq=1228692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=20032 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124311 bytes_read=384790 bytes_retransmit=0 bytes_invalid=0 send_seq=20694 receive_seq=20694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001073 adj=49999942 sd_pos=4152202 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.23 cputime=5983.375 memavail=3262320 print_time=20324.333 buffer_time=2.878 print_stall=0 extruder: target=210 temp=211.2 pwm=0.229
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66290.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64671355 bytes_read=9901349 bytes_retransmit=9 bytes_invalid=0 send_seq=1228881 receive_seq=1228881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=23517 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124317 bytes_read=384806 bytes_retransmit=0 bytes_invalid=0 send_seq=20695 receive_seq=20695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001068 adj=49999924 sd_pos=4154554 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.23 cputime=5983.497 memavail=3264084 print_time=20325.732 buffer_time=3.277 print_stall=0 extruder: target=210 temp=211.1 pwm=0.299
Stats 66291.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64682145 bytes_read=9902496 bytes_retransmit=9 bytes_invalid=0 send_seq=1229070 receive_seq=1229070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=13849 freq=400007712 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124323 bytes_read=384822 bytes_retransmit=0 bytes_invalid=0 send_seq=20696 receive_seq=20696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001063 adj=49999942 sd_pos=4154554 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.23 cputime=5983.554 memavail=3264084 print_time=20325.732 buffer_time=2.277 print_stall=0 extruder: target=210 temp=210.9 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66292.1: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64693402 bytes_read=9903693 bytes_retransmit=9 bytes_invalid=0 send_seq=1229266 receive_seq=1229266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=18378 freq=400007706 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124329 bytes_read=384838 bytes_retransmit=0 bytes_invalid=0 send_seq=20697 receive_seq=20697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001058 adj=49999879 sd_pos=4157307 heater_bed: target=60 temp=60.0 pwm=0.192 sysload=0.23 cputime=5983.748 memavail=3264084 print_time=20327.219 buffer_time=2.763 print_stall=0 extruder: target=210 temp=210.6 pwm=0.360
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66293.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64704145 bytes_read=9904860 bytes_retransmit=9 bytes_invalid=0 send_seq=1229453 receive_seq=1229453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=26628 freq=400007796 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=124335 bytes_read=384867 bytes_retransmit=0 bytes_invalid=0 send_seq=20698 receive_seq=20698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001054 adj=49999846 sd_pos=4160080 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.23 cputime=5983.861 memavail=3264084 print_time=20328.948 buffer_time=3.492 print_stall=0 extruder: target=210 temp=210.2 pwm=0.429
Stats 66294.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64715431 bytes_read=9906037 bytes_retransmit=9 bytes_invalid=0 send_seq=1229649 receive_seq=1229649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=16463 freq=400007801 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=124341 bytes_read=384883 bytes_retransmit=0 bytes_invalid=0 send_seq=20699 receive_seq=20699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001054 adj=49999820 sd_pos=4160080 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.22 cputime=5983.909 memavail=3264088 print_time=20328.948 buffer_time=2.491 print_stall=0 extruder: target=210 temp=210.0 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66295.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64726391 bytes_read=9907214 bytes_retransmit=9 bytes_invalid=0 send_seq=1229841 receive_seq=1229841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=17625 freq=400007777 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=124347 bytes_read=384899 bytes_retransmit=0 bytes_invalid=0 send_seq=20700 receive_seq=20700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001052 adj=49999819 sd_pos=4162544 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.22 cputime=5984.003 memavail=3264088 print_time=20330.033 buffer_time=2.575 print_stall=0 extruder: target=210 temp=209.8 pwm=0.429
Stats 66296.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64737961 bytes_read=9908430 bytes_retransmit=9 bytes_invalid=0 send_seq=1230041 receive_seq=1230041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=10237 freq=400007759 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=124353 bytes_read=384915 bytes_retransmit=0 bytes_invalid=0 send_seq=20701 receive_seq=20701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001048 adj=49999822 sd_pos=4164467 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.22 cputime=5984.070 memavail=3264088 print_time=20330.576 buffer_time=2.117 print_stall=0 extruder: target=210 temp=209.8 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66297.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64749120 bytes_read=9909592 bytes_retransmit=9 bytes_invalid=0 send_seq=1230233 receive_seq=1230233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=5687 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=124359 bytes_read=384931 bytes_retransmit=0 bytes_invalid=0 send_seq=20702 receive_seq=20702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001043 adj=49999807 sd_pos=4166494 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.22 cputime=5984.258 memavail=3262612 print_time=20331.659 buffer_time=2.200 print_stall=0 extruder: target=210 temp=209.9 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66298.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64757372 bytes_read=9910555 bytes_retransmit=9 bytes_invalid=0 send_seq=1230379 receive_seq=1230379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1942 freq=400007794 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124365 bytes_read=384960 bytes_retransmit=0 bytes_invalid=0 send_seq=20703 receive_seq=20703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001039 adj=49999771 sd_pos=4166812 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.22 cputime=5984.474 memavail=3261856 print_time=20332.803 buffer_time=2.344 print_stall=0 extruder: target=210 temp=210.1 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66299.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64763504 bytes_read=9911336 bytes_retransmit=9 bytes_invalid=0 send_seq=1230492 receive_seq=1230492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=740 freq=400007794 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124371 bytes_read=384976 bytes_retransmit=0 bytes_invalid=0 send_seq=20704 receive_seq=20704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001034 adj=49999705 sd_pos=4168671 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.20 cputime=5984.539 memavail=3262612 print_time=20333.473 buffer_time=2.013 print_stall=0 extruder: target=210 temp=210.5 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66300.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64766999 bytes_read=9911873 bytes_retransmit=9 bytes_invalid=0 send_seq=1230559 receive_seq=1230559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=3275 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124377 bytes_read=384992 bytes_retransmit=0 bytes_invalid=0 send_seq=20705 receive_seq=20705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001031 adj=49999647 sd_pos=4171688 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.20 cputime=5984.603 memavail=3267420 print_time=20334.573 buffer_time=2.112 print_stall=0 extruder: target=210 temp=210.6 pwm=0.275
Stats 66301.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64773338 bytes_read=9912660 bytes_retransmit=9 bytes_invalid=0 send_seq=1230673 receive_seq=1230673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=228 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124383 bytes_read=385008 bytes_retransmit=0 bytes_invalid=0 send_seq=20706 receive_seq=20706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001028 adj=49999654 sd_pos=4173274 heater_bed: target=60 temp=60.0 pwm=0.214 sysload=0.20 cputime=5984.656 memavail=3267612 print_time=20335.598 buffer_time=2.136 print_stall=0 extruder: target=210 temp=210.8 pwm=0.275
Stats 66302.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=64776613 bytes_read=9913201 bytes_retransmit=9 bytes_invalid=0 send_seq=1230738 receive_seq=1230738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007917 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124389 bytes_read=385024 bytes_retransmit=0 bytes_invalid=0 send_seq=20707 receive_seq=20707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001028 adj=49999667 sd_pos=4174885 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.20 cputime=5984.712 memavail=3267612 print_time=20336.624 buffer_time=2.161 print_stall=0 extruder: target=210 temp=210.7 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66303.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64782510 bytes_read=9913959 bytes_retransmit=9 bytes_invalid=0 send_seq=1230846 receive_seq=1230846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=898 freq=400007892 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124395 bytes_read=385053 bytes_retransmit=0 bytes_invalid=0 send_seq=20708 receive_seq=20708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001025 adj=49999630 sd_pos=4177901 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.20 cputime=5984.826 memavail=3267612 print_time=20337.461 buffer_time=1.982 print_stall=0 extruder: target=210 temp=210.4 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66304.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64785569 bytes_read=9914459 bytes_retransmit=9 bytes_invalid=0 send_seq=1230903 receive_seq=1230903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=15712 freq=400007861 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124401 bytes_read=385069 bytes_retransmit=0 bytes_invalid=0 send_seq=20709 receive_seq=20709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001024 adj=49999666 sd_pos=4179290 heater_bed: target=60 temp=60.0 pwm=0.264 sysload=0.18 cputime=5984.900 memavail=3267108 print_time=20339.125 buffer_time=2.645 print_stall=0 extruder: target=210 temp=210.1 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66305.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64793804 bytes_read=9915406 bytes_retransmit=9 bytes_invalid=0 send_seq=1231050 receive_seq=1231050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=25589 freq=400007857 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124407 bytes_read=385085 bytes_retransmit=0 bytes_invalid=0 send_seq=20710 receive_seq=20710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001021 adj=49999884 sd_pos=4182372 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.18 cputime=5985.009 memavail=3267108 print_time=20340.765 buffer_time=3.284 print_stall=0 extruder: target=210 temp=209.6 pwm=0.473
Stats 66306.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64805434 bytes_read=9916618 bytes_retransmit=9 bytes_invalid=0 send_seq=1231252 receive_seq=1231252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=15078 freq=400007834 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124413 bytes_read=385101 bytes_retransmit=0 bytes_invalid=0 send_seq=20711 receive_seq=20711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001016 adj=49999924 sd_pos=4182372 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.18 cputime=5985.057 memavail=3267108 print_time=20340.765 buffer_time=2.283 print_stall=0 extruder: target=210 temp=209.2 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66307.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64817265 bytes_read=9917870 bytes_retransmit=9 bytes_invalid=0 send_seq=1231459 receive_seq=1231459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=19278 freq=400007831 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124419 bytes_read=385117 bytes_retransmit=0 bytes_invalid=0 send_seq=20712 receive_seq=20712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001012 adj=49999909 sd_pos=4185148 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5985.176 memavail=3267112 print_time=20342.251 buffer_time=2.768 print_stall=0 extruder: target=210 temp=208.9 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66308.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64828875 bytes_read=9919117 bytes_retransmit=9 bytes_invalid=0 send_seq=1231662 receive_seq=1231662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=20612 freq=400007871 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124425 bytes_read=385146 bytes_retransmit=0 bytes_invalid=0 send_seq=20713 receive_seq=20713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001011 adj=49999871 sd_pos=4187074 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.18 cputime=5985.340 memavail=3267112 print_time=20343.436 buffer_time=2.952 print_stall=0 extruder: target=210 temp=208.8 pwm=0.473
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66309.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64840062 bytes_read=9920284 bytes_retransmit=9 bytes_invalid=0 send_seq=1231855 receive_seq=1231855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=26832 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124431 bytes_read=385162 bytes_retransmit=0 bytes_invalid=0 send_seq=20714 receive_seq=20714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001007 adj=49999850 sd_pos=4190031 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.17 cputime=5985.448 memavail=3266252 print_time=20345.036 buffer_time=3.540 print_stall=0 extruder: target=210 temp=208.9 pwm=0.473
Stats 66310.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64851237 bytes_read=9921421 bytes_retransmit=9 bytes_invalid=0 send_seq=1232040 receive_seq=1232039 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=16814 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124437 bytes_read=385178 bytes_retransmit=0 bytes_invalid=0 send_seq=20715 receive_seq=20715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001003 adj=49999909 sd_pos=4190031 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.17 cputime=5985.496 memavail=3266360 print_time=20345.036 buffer_time=2.539 print_stall=0 extruder: target=210 temp=209.2 pwm=0.418
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66311.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64862051 bytes_read=9922577 bytes_retransmit=9 bytes_invalid=0 send_seq=1232227 receive_seq=1232227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=24597 freq=400007826 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124443 bytes_read=385194 bytes_retransmit=0 bytes_invalid=0 send_seq=20716 receive_seq=20716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001000 adj=49999896 sd_pos=4192996 heater_bed: target=60 temp=60.0 pwm=0.242 sysload=0.17 cputime=5985.607 memavail=3266360 print_time=20346.719 buffer_time=3.221 print_stall=0 extruder: target=210 temp=209.7 pwm=0.340
Stats 66312.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64873641 bytes_read=9923739 bytes_retransmit=9 bytes_invalid=0 send_seq=1232419 receive_seq=1232419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=14141 freq=400007805 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124449 bytes_read=385210 bytes_retransmit=0 bytes_invalid=0 send_seq=20717 receive_seq=20717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000996 adj=49999879 sd_pos=4192996 heater_bed: target=60 temp=60.0 pwm=0.037 sysload=0.17 cputime=5985.654 memavail=3265860 print_time=20346.719 buffer_time=2.220 print_stall=0 extruder: target=210 temp=210.2 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66313.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64885359 bytes_read=9925011 bytes_retransmit=9 bytes_invalid=0 send_seq=1232624 receive_seq=1232624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=9250 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124455 bytes_read=385239 bytes_retransmit=0 bytes_invalid=0 send_seq=20718 receive_seq=20718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000993 adj=49999871 sd_pos=4193620 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.17 cputime=5985.869 memavail=3265760 print_time=20347.713 buffer_time=2.180 print_stall=0 extruder: target=210 temp=210.8 pwm=0.214
Stats 66314.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64896792 bytes_read=9926178 bytes_retransmit=9 bytes_invalid=0 send_seq=1232817 receive_seq=1232817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1377 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124461 bytes_read=385255 bytes_retransmit=0 bytes_invalid=0 send_seq=20719 receive_seq=20719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000993 adj=49999866 sd_pos=4193620 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.23 cputime=5986.059 memavail=3265868 print_time=20348.713 buffer_time=2.179 print_stall=0 extruder: target=210 temp=211.2 pwm=0.214
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66315.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64904161 bytes_read=9927006 bytes_retransmit=9 bytes_invalid=0 send_seq=1232943 receive_seq=1232943 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=15251 freq=400007762 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124467 bytes_read=385271 bytes_retransmit=0 bytes_invalid=0 send_seq=20720 receive_seq=20720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000991 adj=49999881 sd_pos=4197365 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.23 cputime=5986.216 memavail=3265868 print_time=20350.936 buffer_time=3.402 print_stall=0 extruder: target=210 temp=211.5 pwm=0.214
Stats 66316.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64907061 bytes_read=9927490 bytes_retransmit=9 bytes_invalid=0 send_seq=1232994 receive_seq=1232994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=12698 freq=400007747 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124473 bytes_read=385287 bytes_retransmit=0 bytes_invalid=0 send_seq=20721 receive_seq=20721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000990 adj=49999951 sd_pos=4197365 heater_bed: target=60 temp=60.0 pwm=0.294 sysload=0.23 cputime=5986.245 memavail=3265868 print_time=20350.936 buffer_time=2.401 print_stall=0 extruder: target=210 temp=211.5 pwm=0.214
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66317.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64915436 bytes_read=9928432 bytes_retransmit=9 bytes_invalid=0 send_seq=1233142 receive_seq=1233142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=18581 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124479 bytes_read=385303 bytes_retransmit=0 bytes_invalid=0 send_seq=20722 receive_seq=20722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000986 adj=49999960 sd_pos=4199565 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.23 cputime=5986.345 memavail=3265868 print_time=20352.293 buffer_time=2.758 print_stall=0 extruder: target=210 temp=211.4 pwm=0.272
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66318.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64926702 bytes_read=9929630 bytes_retransmit=9 bytes_invalid=0 send_seq=1233338 receive_seq=1233338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=15568 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124485 bytes_read=385319 bytes_retransmit=0 bytes_invalid=0 send_seq=20723 receive_seq=20723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000982 adj=49999936 sd_pos=4200702 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.23 cputime=5986.421 memavail=3265868 print_time=20352.985 buffer_time=2.448 print_stall=0 extruder: target=210 temp=211.0 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66319.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64937585 bytes_read=9930811 bytes_retransmit=9 bytes_invalid=0 send_seq=1233528 receive_seq=1233528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=11341 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124491 bytes_read=385348 bytes_retransmit=0 bytes_invalid=0 send_seq=20724 receive_seq=20724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000984 adj=49999913 sd_pos=4202221 heater_bed: target=60 temp=60.0 pwm=0.157 sysload=0.22 cputime=5986.543 memavail=3265852 print_time=20353.686 buffer_time=2.148 print_stall=0 extruder: target=210 temp=210.2 pwm=0.416
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66320.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64948339 bytes_read=9931913 bytes_retransmit=9 bytes_invalid=0 send_seq=1233708 receive_seq=1233708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=7022 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124497 bytes_read=385364 bytes_retransmit=0 bytes_invalid=0 send_seq=20725 receive_seq=20725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000981 adj=49999969 sd_pos=4205746 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.22 cputime=5986.643 memavail=3264376 print_time=20354.690 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.5 pwm=0.467
Stats 66321.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64958151 bytes_read=9932985 bytes_retransmit=9 bytes_invalid=0 send_seq=1233879 receive_seq=1233879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2334 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124503 bytes_read=385380 bytes_retransmit=0 bytes_invalid=0 send_seq=20726 receive_seq=20726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000978 adj=49999943 sd_pos=4205835 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.22 cputime=5986.873 memavail=3263620 print_time=20355.781 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.1 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66322.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=64964516 bytes_read=9933776 bytes_retransmit=9 bytes_invalid=0 send_seq=1233994 receive_seq=1233994 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=1351 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124509 bytes_read=385396 bytes_retransmit=0 bytes_invalid=0 send_seq=20727 receive_seq=20727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000974 adj=49999957 sd_pos=4207258 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.22 cputime=5986.997 memavail=3262612 print_time=20356.772 buffer_time=2.197 print_stall=0 extruder: target=210 temp=208.7 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66323.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64968772 bytes_read=9934404 bytes_retransmit=9 bytes_invalid=0 send_seq=1234076 receive_seq=1234076 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3608 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124515 bytes_read=385412 bytes_retransmit=0 bytes_invalid=0 send_seq=20728 receive_seq=20728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000971 adj=49999934 sd_pos=4210676 heater_bed: target=60 temp=60.0 pwm=0.325 sysload=0.22 cputime=5987.069 memavail=3262612 print_time=20357.865 buffer_time=2.289 print_stall=0 extruder: target=210 temp=208.7 pwm=0.520
Stats 66324.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64973641 bytes_read=9935076 bytes_retransmit=9 bytes_invalid=0 send_seq=1234167 receive_seq=1234167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1241 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124521 bytes_read=385441 bytes_retransmit=0 bytes_invalid=0 send_seq=20729 receive_seq=20729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000969 adj=49999915 sd_pos=4211880 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.36 cputime=5987.141 memavail=3267108 print_time=20358.637 buffer_time=2.061 print_stall=0 extruder: target=210 temp=208.7 pwm=0.452
Stats 66325.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64978085 bytes_read=9935722 bytes_retransmit=9 bytes_invalid=0 send_seq=1234253 receive_seq=1234253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124527 bytes_read=385456 bytes_retransmit=0 bytes_invalid=0 send_seq=20730 receive_seq=20730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000968 adj=49999936 sd_pos=4213481 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.36 cputime=5987.231 memavail=3266968 print_time=20359.666 buffer_time=2.089 print_stall=0 extruder: target=210 temp=209.0 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66326.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64984123 bytes_read=9936484 bytes_retransmit=9 bytes_invalid=0 send_seq=1234366 receive_seq=1234366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=5683 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124533 bytes_read=385471 bytes_retransmit=0 bytes_invalid=0 send_seq=20731 receive_seq=20731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000974 adj=49999952 sd_pos=4216007 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.36 cputime=5987.357 memavail=3266968 print_time=20361.278 buffer_time=2.700 print_stall=0 extruder: target=210 temp=209.2 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66327.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64987262 bytes_read=9937010 bytes_retransmit=9 bytes_invalid=0 send_seq=1234428 receive_seq=1234428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=17431 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124539 bytes_read=385486 bytes_retransmit=0 bytes_invalid=0 send_seq=20732 receive_seq=20732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000970 adj=50000041 sd_pos=4218476 heater_bed: target=60 temp=60.0 pwm=0.248 sysload=0.36 cputime=5987.455 memavail=3265960 print_time=20362.631 buffer_time=3.053 print_stall=0 extruder: target=210 temp=209.5 pwm=0.397
Stats 66328.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=64992175 bytes_read=9937712 bytes_retransmit=9 bytes_invalid=0 send_seq=1234522 receive_seq=1234522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=13122 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124545 bytes_read=385501 bytes_retransmit=0 bytes_invalid=0 send_seq=20733 receive_seq=20733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000966 adj=49999997 sd_pos=4218476 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.36 cputime=5987.486 memavail=3265972 print_time=20362.631 buffer_time=2.052 print_stall=0 extruder: target=210 temp=209.8 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66329.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65003802 bytes_read=9938924 bytes_retransmit=9 bytes_invalid=0 send_seq=1234724 receive_seq=1234724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=17939 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124551 bytes_read=385529 bytes_retransmit=0 bytes_invalid=0 send_seq=20734 receive_seq=20734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000967 adj=49999986 sd_pos=4220863 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.41 cputime=5987.604 memavail=3265244 print_time=20364.074 buffer_time=2.495 print_stall=0 extruder: target=210 temp=210.0 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66330.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65015885 bytes_read=9940206 bytes_retransmit=9 bytes_invalid=0 send_seq=1234937 receive_seq=1234937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=25055 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124557 bytes_read=385545 bytes_retransmit=0 bytes_invalid=0 send_seq=20735 receive_seq=20735 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000963 adj=50000001 sd_pos=4223920 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.41 cputime=5987.719 memavail=3265248 print_time=20365.703 buffer_time=3.122 print_stall=0 extruder: target=210 temp=210.3 pwm=0.339
Stats 66331.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65027659 bytes_read=9941453 bytes_retransmit=9 bytes_invalid=0 send_seq=1235141 receive_seq=1235141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=14440 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124569 bytes_read=385577 bytes_retransmit=0 bytes_invalid=0 send_seq=20737 receive_seq=20737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000964 adj=49999992 sd_pos=4223920 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.41 cputime=5987.781 memavail=3265248 print_time=20365.703 buffer_time=2.121 print_stall=0 extruder: target=210 temp=210.5 pwm=0.339
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66332.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65039715 bytes_read=9942695 bytes_retransmit=9 bytes_invalid=0 send_seq=1235349 receive_seq=1235349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=21387 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124575 bytes_read=385593 bytes_retransmit=0 bytes_invalid=0 send_seq=20738 receive_seq=20738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000958 adj=50000011 sd_pos=4226890 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.41 cputime=5987.937 memavail=3265248 print_time=20367.298 buffer_time=2.716 print_stall=0 extruder: target=210 temp=210.5 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66333.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65052066 bytes_read=9943963 bytes_retransmit=9 bytes_invalid=0 send_seq=1235556 receive_seq=1235556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=25081 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124581 bytes_read=385609 bytes_retransmit=0 bytes_invalid=0 send_seq=20739 receive_seq=20739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000954 adj=49999958 sd_pos=4229224 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.41 cputime=5988.053 memavail=3265248 print_time=20368.710 buffer_time=3.127 print_stall=0 extruder: target=210 temp=210.6 pwm=0.318
Stats 66334.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65064475 bytes_read=9945259 bytes_retransmit=9 bytes_invalid=0 send_seq=1235772 receive_seq=1235772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=13904 freq=400007584 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124587 bytes_read=385638 bytes_retransmit=0 bytes_invalid=0 send_seq=20740 receive_seq=20740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000951 adj=49999911 sd_pos=4229224 heater_bed: target=60 temp=60.0 pwm=0.029 sysload=0.38 cputime=5988.103 memavail=3264996 print_time=20368.710 buffer_time=2.126 print_stall=0 extruder: target=210 temp=210.7 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66335.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65076555 bytes_read=9946516 bytes_retransmit=9 bytes_invalid=0 send_seq=1235983 receive_seq=1235983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=19005 freq=400007589 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124593 bytes_read=385654 bytes_retransmit=0 bytes_invalid=0 send_seq=20741 receive_seq=20741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000947 adj=49999906 sd_pos=4231726 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.38 cputime=5988.223 memavail=3264996 print_time=20370.161 buffer_time=2.576 print_stall=0 extruder: target=210 temp=210.8 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66336.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65088151 bytes_read=9947747 bytes_retransmit=9 bytes_invalid=0 send_seq=1236186 receive_seq=1236186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=25197 freq=400007588 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124599 bytes_read=385670 bytes_retransmit=0 bytes_invalid=0 send_seq=20742 receive_seq=20742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000942 adj=49999852 sd_pos=4234487 heater_bed: target=60 temp=60.0 pwm=0.034 sysload=0.38 cputime=5988.347 memavail=3264996 print_time=20371.696 buffer_time=3.111 print_stall=0 extruder: target=210 temp=210.8 pwm=0.289
Stats 66337.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65100166 bytes_read=9949005 bytes_retransmit=9 bytes_invalid=0 send_seq=1236395 receive_seq=1236395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=14354 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124605 bytes_read=385686 bytes_retransmit=0 bytes_invalid=0 send_seq=20743 receive_seq=20743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000947 adj=49999868 sd_pos=4234487 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.38 cputime=5988.428 memavail=3265000 print_time=20371.696 buffer_time=2.111 print_stall=0 extruder: target=210 temp=210.8 pwm=0.289
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66338.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65112012 bytes_read=9950258 bytes_retransmit=9 bytes_invalid=0 send_seq=1236602 receive_seq=1236602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=19355 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124611 bytes_read=385702 bytes_retransmit=0 bytes_invalid=0 send_seq=20744 receive_seq=20744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000942 adj=49999906 sd_pos=4237044 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.38 cputime=5988.601 memavail=3265000 print_time=20373.100 buffer_time=2.514 print_stall=0 extruder: target=210 temp=210.8 pwm=0.289
Stats 66339.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65124480 bytes_read=9951550 bytes_retransmit=9 bytes_invalid=0 send_seq=1236817 receive_seq=1236817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=10541 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124617 bytes_read=385731 bytes_retransmit=0 bytes_invalid=0 send_seq=20745 receive_seq=20745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000938 adj=49999849 sd_pos=4237044 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.35 cputime=5988.728 memavail=3264508 print_time=20373.630 buffer_time=2.043 print_stall=0 extruder: target=210 temp=210.8 pwm=0.289
Stats 66340.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65136912 bytes_read=9952851 bytes_retransmit=9 bytes_invalid=0 send_seq=1237034 receive_seq=1237034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2086 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124623 bytes_read=385747 bytes_retransmit=0 bytes_invalid=0 send_seq=20746 receive_seq=20746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000935 adj=49999791 sd_pos=4237087 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.35 cputime=5988.933 memavail=3264508 print_time=20374.632 buffer_time=2.045 print_stall=0 extruder: target=210 temp=210.7 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66341.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65145078 bytes_read=9953783 bytes_retransmit=9 bytes_invalid=0 send_seq=1237180 receive_seq=1237180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=6751 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124629 bytes_read=385763 bytes_retransmit=0 bytes_invalid=0 send_seq=20747 receive_seq=20747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000931 adj=49999767 sd_pos=4238938 heater_bed: target=60 temp=60.0 pwm=0.034 sysload=0.35 cputime=5989.052 memavail=3264004 print_time=20376.005 buffer_time=2.417 print_stall=0 extruder: target=210 temp=210.6 pwm=0.329
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66342.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65148483 bytes_read=9954340 bytes_retransmit=9 bytes_invalid=0 send_seq=1237248 receive_seq=1237248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=12060 freq=400007594 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124635 bytes_read=385779 bytes_retransmit=0 bytes_invalid=0 send_seq=20748 receive_seq=20748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000930 adj=49999819 sd_pos=4240674 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.35 cputime=5989.121 memavail=3263780 print_time=20376.932 buffer_time=2.343 print_stall=0 extruder: target=210 temp=210.4 pwm=0.329
Stats 66343.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65157894 bytes_read=9955407 bytes_retransmit=9 bytes_invalid=0 send_seq=1237415 receive_seq=1237415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=8028 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124641 bytes_read=385795 bytes_retransmit=0 bytes_invalid=0 send_seq=20749 receive_seq=20749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000930 adj=49999826 sd_pos=4243510 heater_bed: target=60 temp=60.0 pwm=0.029 sysload=0.35 cputime=5989.258 memavail=3268184 print_time=20377.734 buffer_time=2.144 print_stall=0 extruder: target=210 temp=210.1 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66344.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65167552 bytes_read=9956444 bytes_retransmit=9 bytes_invalid=0 send_seq=1237582 receive_seq=1237582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3939 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124647 bytes_read=385824 bytes_retransmit=0 bytes_invalid=0 send_seq=20750 receive_seq=20750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000929 adj=49999834 sd_pos=4244625 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.32 cputime=5989.531 memavail=3267176 print_time=20378.804 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.8 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66345.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65174867 bytes_read=9957316 bytes_retransmit=9 bytes_invalid=0 send_seq=1237713 receive_seq=1237713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=832 freq=400007593 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124653 bytes_read=385840 bytes_retransmit=0 bytes_invalid=0 send_seq=20751 receive_seq=20751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000927 adj=49999868 sd_pos=4244946 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.32 cputime=5989.718 memavail=3265160 print_time=20379.708 buffer_time=2.110 print_stall=0 extruder: target=210 temp=209.5 pwm=0.444
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66346.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65180122 bytes_read=9958022 bytes_retransmit=9 bytes_invalid=0 send_seq=1237811 receive_seq=1237811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=2248 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124659 bytes_read=385856 bytes_retransmit=0 bytes_invalid=0 send_seq=20752 receive_seq=20752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000927 adj=49999849 sd_pos=4247730 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.32 cputime=5989.789 memavail=3264672 print_time=20380.667 buffer_time=2.068 print_stall=0 extruder: target=210 temp=209.1 pwm=0.444
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66347.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65184083 bytes_read=9958607 bytes_retransmit=9 bytes_invalid=0 send_seq=1237888 receive_seq=1237888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4136 freq=400007579 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124665 bytes_read=385872 bytes_retransmit=0 bytes_invalid=0 send_seq=20753 receive_seq=20753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000924 adj=49999870 sd_pos=4250752 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.32 cputime=5989.853 memavail=3264672 print_time=20381.777 buffer_time=2.178 print_stall=0 extruder: target=210 temp=209.0 pwm=0.444
Stats 66348.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65191142 bytes_read=9959473 bytes_retransmit=9 bytes_invalid=0 send_seq=1238015 receive_seq=1238015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=888 freq=400007578 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124671 bytes_read=385888 bytes_retransmit=0 bytes_invalid=0 send_seq=20754 receive_seq=20754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000921 adj=49999879 sd_pos=4253024 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.32 cputime=5989.917 memavail=3264672 print_time=20382.823 buffer_time=2.223 print_stall=0 extruder: target=210 temp=208.8 pwm=0.444
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66349.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65197012 bytes_read=9960224 bytes_retransmit=9 bytes_invalid=0 send_seq=1238122 receive_seq=1238122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=13135 freq=400007595 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=124677 bytes_read=385917 bytes_retransmit=0 bytes_invalid=0 send_seq=20755 receive_seq=20755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000924 adj=49999870 sd_pos=4256036 heater_bed: target=60 temp=60.0 pwm=0.096 sysload=0.29 cputime=5990.107 memavail=3264820 print_time=20384.686 buffer_time=3.086 print_stall=0 extruder: target=210 temp=208.6 pwm=0.487
Stats 66350.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65200965 bytes_read=9960801 bytes_retransmit=9 bytes_invalid=0 send_seq=1238197 receive_seq=1238197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=9723 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=124683 bytes_read=385933 bytes_retransmit=0 bytes_invalid=0 send_seq=20756 receive_seq=20756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000921 adj=49999929 sd_pos=4256036 heater_bed: target=60 temp=60.0 pwm=0.224 sysload=0.29 cputime=5990.138 memavail=3264172 print_time=20384.686 buffer_time=2.085 print_stall=0 extruder: target=210 temp=208.6 pwm=0.487
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66351.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65208463 bytes_read=9961698 bytes_retransmit=9 bytes_invalid=0 send_seq=1238333 receive_seq=1238333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=17975 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=124689 bytes_read=385949 bytes_retransmit=0 bytes_invalid=0 send_seq=20757 receive_seq=20757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000918 adj=49999889 sd_pos=4258492 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.29 cputime=5990.250 memavail=3264172 print_time=20386.088 buffer_time=2.486 print_stall=0 extruder: target=210 temp=208.7 pwm=0.487
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66352.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65220747 bytes_read=9962989 bytes_retransmit=9 bytes_invalid=0 send_seq=1238548 receive_seq=1238548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=24515 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=124695 bytes_read=385965 bytes_retransmit=0 bytes_invalid=0 send_seq=20758 receive_seq=20758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000913 adj=49999855 sd_pos=4261037 heater_bed: target=60 temp=60.0 pwm=0.211 sysload=0.29 cputime=5990.370 memavail=3264172 print_time=20387.642 buffer_time=3.039 print_stall=0 extruder: target=210 temp=208.8 pwm=0.427
Stats 66353.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65232624 bytes_read=9964237 bytes_retransmit=9 bytes_invalid=0 send_seq=1238754 receive_seq=1238754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=13819 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=124701 bytes_read=385981 bytes_retransmit=0 bytes_invalid=0 send_seq=20759 receive_seq=20759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000908 adj=49999846 sd_pos=4261037 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.29 cputime=5990.421 memavail=3264172 print_time=20387.642 buffer_time=2.039 print_stall=0 extruder: target=210 temp=209.0 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66354.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65244705 bytes_read=9965509 bytes_retransmit=9 bytes_invalid=0 send_seq=1238965 receive_seq=1238965 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=17553 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124707 bytes_read=386010 bytes_retransmit=0 bytes_invalid=0 send_seq=20760 receive_seq=20760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000903 adj=49999709 sd_pos=4263433 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.27 cputime=5990.545 memavail=3264172 print_time=20388.966 buffer_time=2.362 print_stall=0 extruder: target=210 temp=209.3 pwm=0.368
Stats 66355.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65257277 bytes_read=9966810 bytes_retransmit=9 bytes_invalid=0 send_seq=1239182 receive_seq=1239182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=9435 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124713 bytes_read=386026 bytes_retransmit=0 bytes_invalid=0 send_seq=20761 receive_seq=20761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000903 adj=49999681 sd_pos=4263433 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.27 cputime=5990.887 memavail=3262660 print_time=20389.742 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.9 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66356.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65269302 bytes_read=9968032 bytes_retransmit=9 bytes_invalid=0 send_seq=1239386 receive_seq=1239386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=4679 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124719 bytes_read=386042 bytes_retransmit=0 bytes_invalid=0 send_seq=20762 receive_seq=20762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000898 adj=49999674 sd_pos=4264185 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.27 cputime=5991.080 memavail=3262808 print_time=20390.862 buffer_time=2.256 print_stall=0 extruder: target=210 temp=210.2 pwm=0.311
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66357.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65276321 bytes_read=9968879 bytes_retransmit=9 bytes_invalid=0 send_seq=1239512 receive_seq=1239512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=12533 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124725 bytes_read=386058 bytes_retransmit=0 bytes_invalid=0 send_seq=20763 receive_seq=20763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000906 adj=49999688 sd_pos=4266244 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.27 cputime=5991.186 memavail=3262660 print_time=20392.138 buffer_time=2.532 print_stall=0 extruder: target=210 temp=210.8 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66358.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65281272 bytes_read=9969516 bytes_retransmit=9 bytes_invalid=0 send_seq=1239595 receive_seq=1239594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=22044 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=124731 bytes_read=386074 bytes_retransmit=0 bytes_invalid=0 send_seq=20764 receive_seq=20764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000903 adj=49999863 sd_pos=4268398 heater_bed: target=60 temp=60.0 pwm=0.237 sysload=0.27 cputime=5991.290 memavail=3262660 print_time=20393.388 buffer_time=2.781 print_stall=0 extruder: target=210 temp=211.1 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66359.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65293876 bytes_read=9970823 bytes_retransmit=9 bytes_invalid=0 send_seq=1239815 receive_seq=1239815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=26423 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124737 bytes_read=386103 bytes_retransmit=0 bytes_invalid=0 send_seq=20765 receive_seq=20765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000897 adj=49999843 sd_pos=4270696 heater_bed: target=60 temp=60.0 pwm=0.117 sysload=0.25 cputime=5991.410 memavail=3268228 print_time=20394.892 buffer_time=3.284 print_stall=0 extruder: target=210 temp=211.2 pwm=0.251
Stats 66360.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65306118 bytes_read=9972110 bytes_retransmit=9 bytes_invalid=0 send_seq=1240029 receive_seq=1240029 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=15422 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124743 bytes_read=386119 bytes_retransmit=0 bytes_invalid=0 send_seq=20766 receive_seq=20766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000892 adj=49999843 sd_pos=4270696 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.25 cputime=5991.460 memavail=3268360 print_time=20394.892 buffer_time=2.283 print_stall=0 extruder: target=210 temp=211.2 pwm=0.251
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66361.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65317763 bytes_read=9973341 bytes_retransmit=9 bytes_invalid=0 send_seq=1240232 receive_seq=1240232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=22947 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124749 bytes_read=386135 bytes_retransmit=0 bytes_invalid=0 send_seq=20767 receive_seq=20767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000888 adj=49999794 sd_pos=4273443 heater_bed: target=60 temp=60.0 pwm=0.018 sysload=0.25 cputime=5991.658 memavail=3267128 print_time=20396.476 buffer_time=2.866 print_stall=0 extruder: target=210 temp=210.8 pwm=0.370
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66362.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65329700 bytes_read=9974563 bytes_retransmit=9 bytes_invalid=0 send_seq=1240436 receive_seq=1240436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=29217 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124755 bytes_read=386151 bytes_retransmit=0 bytes_invalid=0 send_seq=20768 receive_seq=20768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000884 adj=49999779 sd_pos=4276221 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.25 cputime=5991.775 memavail=3267132 print_time=20398.020 buffer_time=3.409 print_stall=0 extruder: target=210 temp=210.5 pwm=0.370
Stats 66363.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65342412 bytes_read=9975851 bytes_retransmit=9 bytes_invalid=0 send_seq=1240647 receive_seq=1240647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=17726 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124761 bytes_read=386167 bytes_retransmit=0 bytes_invalid=0 send_seq=20769 receive_seq=20769 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000880 adj=49999801 sd_pos=4276221 heater_bed: target=60 temp=60.0 pwm=0.261 sysload=0.25 cputime=5991.824 memavail=3267132 print_time=20398.020 buffer_time=2.409 print_stall=0 extruder: target=210 temp=210.1 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66364.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65354587 bytes_read=9977122 bytes_retransmit=9 bytes_invalid=0 send_seq=1240858 receive_seq=1240858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=22631 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124767 bytes_read=386196 bytes_retransmit=0 bytes_invalid=0 send_seq=20770 receive_seq=20770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000878 adj=49999767 sd_pos=4278297 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.23 cputime=5991.944 memavail=3267132 print_time=20399.453 buffer_time=2.842 print_stall=0 extruder: target=210 temp=209.9 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66365.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65366693 bytes_read=9978334 bytes_retransmit=9 bytes_invalid=0 send_seq=1241060 receive_seq=1241060 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=14059 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124773 bytes_read=386212 bytes_retransmit=0 bytes_invalid=0 send_seq=20771 receive_seq=20771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000878 adj=49999739 sd_pos=4279200 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.23 cputime=5992.006 memavail=3267132 print_time=20399.750 buffer_time=2.138 print_stall=0 extruder: target=210 temp=209.7 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66366.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65379228 bytes_read=9979645 bytes_retransmit=9 bytes_invalid=0 send_seq=1241276 receive_seq=1241276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=9393 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124779 bytes_read=386228 bytes_retransmit=0 bytes_invalid=0 send_seq=20772 receive_seq=20772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000877 adj=49999744 sd_pos=4283046 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.23 cputime=5992.178 memavail=3267132 print_time=20400.904 buffer_time=2.273 print_stall=0 extruder: target=210 temp=209.7 pwm=0.430
Stats 66367.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65390404 bytes_read=9980822 bytes_retransmit=9 bytes_invalid=0 send_seq=1241471 receive_seq=1241471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2333 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124785 bytes_read=386244 bytes_retransmit=0 bytes_invalid=0 send_seq=20773 receive_seq=20773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000875 adj=49999719 sd_pos=4283046 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.23 cputime=5992.405 memavail=3266124 print_time=20401.661 buffer_time=2.029 print_stall=0 extruder: target=210 temp=209.8 pwm=0.377
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66368.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65396879 bytes_read=9981590 bytes_retransmit=9 bytes_invalid=0 send_seq=1241581 receive_seq=1241581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2457 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=124791 bytes_read=386260 bytes_retransmit=0 bytes_invalid=0 send_seq=20774 receive_seq=20774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000872 adj=49999736 sd_pos=4284348 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.23 cputime=5992.587 memavail=3265636 print_time=20402.948 buffer_time=2.315 print_stall=0 extruder: target=210 temp=210.0 pwm=0.324
Stats 66369.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65401669 bytes_read=9982225 bytes_retransmit=9 bytes_invalid=0 send_seq=1241663 receive_seq=1241663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2295 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124797 bytes_read=386289 bytes_retransmit=0 bytes_invalid=0 send_seq=20775 receive_seq=20775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000868 adj=49999775 sd_pos=4287104 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.29 cputime=5992.652 memavail=3264628 print_time=20403.703 buffer_time=2.070 print_stall=0 extruder: target=210 temp=210.3 pwm=0.270
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66370.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65406148 bytes_read=9982857 bytes_retransmit=9 bytes_invalid=0 send_seq=1241749 receive_seq=1241749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2992 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124803 bytes_read=386305 bytes_retransmit=0 bytes_invalid=0 send_seq=20776 receive_seq=20776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000865 adj=49999743 sd_pos=4287873 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.29 cputime=5992.857 memavail=3269720 print_time=20404.780 buffer_time=2.146 print_stall=0 extruder: target=210 temp=210.5 pwm=0.270
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66371.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65412837 bytes_read=9983649 bytes_retransmit=9 bytes_invalid=0 send_seq=1241867 receive_seq=1241867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=1583 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124809 bytes_read=386321 bytes_retransmit=0 bytes_invalid=0 send_seq=20777 receive_seq=20777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000860 adj=49999748 sd_pos=4288400 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.29 cputime=5993.043 memavail=3267704 print_time=20405.851 buffer_time=2.216 print_stall=0 extruder: target=210 temp=210.5 pwm=0.270
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66372.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65418164 bytes_read=9984380 bytes_retransmit=9 bytes_invalid=0 send_seq=1241967 receive_seq=1241967 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=12020 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124815 bytes_read=386337 bytes_retransmit=0 bytes_invalid=0 send_seq=20778 receive_seq=20778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000855 adj=49999730 sd_pos=4290844 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.29 cputime=5993.155 memavail=3267704 print_time=20407.321 buffer_time=2.685 print_stall=0 extruder: target=210 temp=210.3 pwm=0.332
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66373.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65422088 bytes_read=9984928 bytes_retransmit=9 bytes_invalid=0 send_seq=1242033 receive_seq=1242033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=24410 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=124821 bytes_read=386353 bytes_retransmit=0 bytes_invalid=0 send_seq=20779 receive_seq=20779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000857 adj=49999749 sd_pos=4293164 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.29 cputime=5993.326 memavail=3266956 print_time=20408.828 buffer_time=3.192 print_stall=0 extruder: target=210 temp=210.0 pwm=0.391
Stats 66374.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65433412 bytes_read=9986110 bytes_retransmit=9 bytes_invalid=0 send_seq=1242229 receive_seq=1242229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=14237 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124827 bytes_read=386382 bytes_retransmit=0 bytes_invalid=0 send_seq=20780 receive_seq=20780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000852 adj=49999805 sd_pos=4293164 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.27 cputime=5993.373 memavail=3266956 print_time=20408.828 buffer_time=2.191 print_stall=0 extruder: target=210 temp=209.6 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66375.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65444863 bytes_read=9987301 bytes_retransmit=9 bytes_invalid=0 send_seq=1242421 receive_seq=1242421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=20821 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124833 bytes_read=386398 bytes_retransmit=0 bytes_invalid=0 send_seq=20781 receive_seq=20781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000850 adj=49999770 sd_pos=4295630 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.27 cputime=5993.484 memavail=3266956 print_time=20410.423 buffer_time=2.785 print_stall=0 extruder: target=210 temp=209.1 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66376.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65456592 bytes_read=9988523 bytes_retransmit=9 bytes_invalid=0 send_seq=1242625 receive_seq=1242625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=27626 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124839 bytes_read=386414 bytes_retransmit=0 bytes_invalid=0 send_seq=20782 receive_seq=20782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000846 adj=49999771 sd_pos=4298188 heater_bed: target=60 temp=60.0 pwm=0.280 sysload=0.27 cputime=5993.590 memavail=3266468 print_time=20412.023 buffer_time=3.384 print_stall=0 extruder: target=210 temp=208.8 pwm=0.527
Stats 66377.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65468324 bytes_read=9989735 bytes_retransmit=9 bytes_invalid=0 send_seq=1242827 receive_seq=1242827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=17058 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124845 bytes_read=386430 bytes_retransmit=0 bytes_invalid=0 send_seq=20783 receive_seq=20783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000842 adj=49999791 sd_pos=4298188 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.27 cputime=5993.638 memavail=3266468 print_time=20412.023 buffer_time=2.383 print_stall=0 extruder: target=210 temp=208.7 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66378.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65480468 bytes_read=9991037 bytes_retransmit=9 bytes_invalid=0 send_seq=1243038 receive_seq=1243038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=10 upcoming_bytes=22101 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124851 bytes_read=386446 bytes_retransmit=0 bytes_invalid=0 send_seq=20784 receive_seq=20784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000838 adj=49999753 sd_pos=4300831 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.27 cputime=5993.757 memavail=3266468 print_time=20413.516 buffer_time=2.875 print_stall=0 extruder: target=210 temp=208.8 pwm=0.474
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66379.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65492341 bytes_read=9992222 bytes_retransmit=9 bytes_invalid=0 send_seq=1243235 receive_seq=1243235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=25707 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124857 bytes_read=386475 bytes_retransmit=0 bytes_invalid=0 send_seq=20785 receive_seq=20785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000836 adj=49999723 sd_pos=4303221 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.24 cputime=5993.948 memavail=3264988 print_time=20414.919 buffer_time=3.277 print_stall=0 extruder: target=210 temp=209.2 pwm=0.410
Stats 66380.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65504391 bytes_read=9993471 bytes_retransmit=9 bytes_invalid=0 send_seq=1243445 receive_seq=1243445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14883 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124863 bytes_read=386491 bytes_retransmit=0 bytes_invalid=0 send_seq=20786 receive_seq=20786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000833 adj=49999752 sd_pos=4303221 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.24 cputime=5993.998 memavail=3264992 print_time=20414.919 buffer_time=2.276 print_stall=0 extruder: target=210 temp=209.7 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66381.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65516261 bytes_read=9994722 bytes_retransmit=9 bytes_invalid=0 send_seq=1243649 receive_seq=1243649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=19266 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124869 bytes_read=386507 bytes_retransmit=0 bytes_invalid=0 send_seq=20787 receive_seq=20787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000830 adj=49999732 sd_pos=4305752 heater_bed: target=60 temp=60.0 pwm=0.043 sysload=0.24 cputime=5994.106 memavail=3264992 print_time=20416.350 buffer_time=2.707 print_stall=0 extruder: target=210 temp=210.4 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66382.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65527497 bytes_read=9995909 bytes_retransmit=9 bytes_invalid=0 send_seq=1243846 receive_seq=1243846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=23241 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124875 bytes_read=386523 bytes_retransmit=0 bytes_invalid=0 send_seq=20788 receive_seq=20788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000827 adj=49999705 sd_pos=4308185 heater_bed: target=60 temp=60.0 pwm=0.270 sysload=0.24 cputime=5994.214 memavail=3264992 print_time=20417.711 buffer_time=3.067 print_stall=0 extruder: target=210 temp=210.8 pwm=0.214
Stats 66383.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65539483 bytes_read=9997177 bytes_retransmit=9 bytes_invalid=0 send_seq=1244056 receive_seq=1244056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=12465 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124881 bytes_read=386539 bytes_retransmit=0 bytes_invalid=0 send_seq=20789 receive_seq=20789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000825 adj=49999726 sd_pos=4308185 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.24 cputime=5994.263 memavail=3264992 print_time=20417.711 buffer_time=2.066 print_stall=0 extruder: target=210 temp=211.3 pwm=0.214
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66384.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65550798 bytes_read=9998393 bytes_retransmit=9 bytes_invalid=0 send_seq=1244253 receive_seq=1244253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=18175 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124887 bytes_read=386568 bytes_retransmit=0 bytes_invalid=0 send_seq=20790 receive_seq=20790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000822 adj=49999643 sd_pos=4310868 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.22 cputime=5994.377 memavail=3264992 print_time=20419.210 buffer_time=2.565 print_stall=0 extruder: target=210 temp=211.6 pwm=0.214
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66385.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65562261 bytes_read=9999580 bytes_retransmit=9 bytes_invalid=0 send_seq=1244450 receive_seq=1244450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=24861 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124893 bytes_read=386584 bytes_retransmit=0 bytes_invalid=0 send_seq=20791 receive_seq=20791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000826 adj=49999621 sd_pos=4313505 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.22 cputime=5994.562 memavail=3264992 print_time=20420.810 buffer_time=3.164 print_stall=0 extruder: target=210 temp=211.7 pwm=0.214
Stats 66386.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65573818 bytes_read=10000762 bytes_retransmit=9 bytes_invalid=0 send_seq=1244643 receive_seq=1244643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=14411 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124899 bytes_read=386600 bytes_retransmit=0 bytes_invalid=0 send_seq=20792 receive_seq=20792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000822 adj=49999753 sd_pos=4313505 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.22 cputime=5994.611 memavail=3264992 print_time=20420.810 buffer_time=2.162 print_stall=0 extruder: target=210 temp=211.6 pwm=0.247
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66387.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65585849 bytes_read=10002023 bytes_retransmit=9 bytes_invalid=0 send_seq=1244852 receive_seq=1244852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=21303 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124905 bytes_read=386616 bytes_retransmit=0 bytes_invalid=0 send_seq=20793 receive_seq=20793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000818 adj=49999740 sd_pos=4316160 heater_bed: target=60 temp=60.0 pwm=0.292 sysload=0.22 cputime=5994.720 memavail=3264992 print_time=20422.419 buffer_time=2.770 print_stall=0 extruder: target=210 temp=211.4 pwm=0.298
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66388.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65597764 bytes_read=10003231 bytes_retransmit=9 bytes_invalid=0 send_seq=1245050 receive_seq=1245050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=26430 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=124911 bytes_read=386632 bytes_retransmit=0 bytes_invalid=0 send_seq=20794 receive_seq=20794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000815 adj=49999647 sd_pos=4318738 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.22 cputime=5994.830 memavail=3264992 print_time=20423.923 buffer_time=3.273 print_stall=0 extruder: target=210 temp=211.0 pwm=0.298
Stats 66389.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65609827 bytes_read=10004493 bytes_retransmit=9 bytes_invalid=0 send_seq=1245259 receive_seq=1245259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=15574 freq=400007708 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124917 bytes_read=386661 bytes_retransmit=0 bytes_invalid=0 send_seq=20795 receive_seq=20795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000811 adj=49999692 sd_pos=4318738 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.21 cputime=5994.881 memavail=3265000 print_time=20423.923 buffer_time=2.272 print_stall=0 extruder: target=210 temp=210.6 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66390.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65621980 bytes_read=10005710 bytes_retransmit=9 bytes_invalid=0 send_seq=1245460 receive_seq=1245460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=20800 freq=400007695 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124923 bytes_read=386677 bytes_retransmit=0 bytes_invalid=0 send_seq=20796 receive_seq=20796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000808 adj=49999645 sd_pos=4321177 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.21 cputime=5995.005 memavail=3265004 print_time=20425.465 buffer_time=2.814 print_stall=0 extruder: target=210 temp=210.2 pwm=0.362
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66391.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65633668 bytes_read=10006931 bytes_retransmit=9 bytes_invalid=0 send_seq=1245664 receive_seq=1245664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=25280 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124929 bytes_read=386693 bytes_retransmit=0 bytes_invalid=0 send_seq=20797 receive_seq=20797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000808 adj=49999642 sd_pos=4323648 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.21 cputime=5995.197 memavail=3265004 print_time=20426.899 buffer_time=3.247 print_stall=0 extruder: target=210 temp=209.8 pwm=0.435
Stats 66392.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65645403 bytes_read=10008184 bytes_retransmit=9 bytes_invalid=0 send_seq=1245869 receive_seq=1245869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=14718 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124941 bytes_read=386725 bytes_retransmit=0 bytes_invalid=0 send_seq=20799 receive_seq=20799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000805 adj=49999701 sd_pos=4323648 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=0.21 cputime=5995.248 memavail=3264756 print_time=20426.899 buffer_time=2.246 print_stall=0 extruder: target=210 temp=209.6 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66393.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65656946 bytes_read=10009421 bytes_retransmit=9 bytes_invalid=0 send_seq=1246070 receive_seq=1246070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=16771 freq=400007693 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124947 bytes_read=386741 bytes_retransmit=0 bytes_invalid=0 send_seq=20800 receive_seq=20800 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000801 adj=49999674 sd_pos=4325558 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.21 cputime=5995.351 memavail=3264756 print_time=20428.081 buffer_time=2.427 print_stall=0 extruder: target=210 temp=209.4 pwm=0.435
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66394.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65668722 bytes_read=10010638 bytes_retransmit=9 bytes_invalid=0 send_seq=1246273 receive_seq=1246273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=12645 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124953 bytes_read=386770 bytes_retransmit=0 bytes_invalid=0 send_seq=20801 receive_seq=20801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000798 adj=49999649 sd_pos=4327308 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.27 cputime=5995.430 memavail=3264760 print_time=20428.779 buffer_time=2.125 print_stall=0 extruder: target=210 temp=209.5 pwm=0.383
Stats 66395.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65680312 bytes_read=10011815 bytes_retransmit=9 bytes_invalid=0 send_seq=1246465 receive_seq=1246465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=7125 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124959 bytes_read=386786 bytes_retransmit=0 bytes_invalid=0 send_seq=20802 receive_seq=20802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000796 adj=49999634 sd_pos=4330145 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.27 cputime=5995.511 memavail=3264760 print_time=20429.665 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.6 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66396.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65690399 bytes_read=10012871 bytes_retransmit=9 bytes_invalid=0 send_seq=1246633 receive_seq=1246633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=2622 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124965 bytes_read=386802 bytes_retransmit=0 bytes_invalid=0 send_seq=20803 receive_seq=20803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000794 adj=49999630 sd_pos=4330959 heater_bed: target=60 temp=60.0 pwm=0.268 sysload=0.27 cputime=5995.721 memavail=3264760 print_time=20430.734 buffer_time=2.079 print_stall=0 extruder: target=210 temp=209.9 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66397.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65697133 bytes_read=10013683 bytes_retransmit=9 bytes_invalid=0 send_seq=1246755 receive_seq=1246755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=496 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124971 bytes_read=386818 bytes_retransmit=0 bytes_invalid=0 send_seq=20804 receive_seq=20804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000790 adj=49999656 sd_pos=4331605 heater_bed: target=60 temp=60.0 pwm=0.306 sysload=0.27 cputime=5995.934 memavail=3264760 print_time=20431.674 buffer_time=2.017 print_stall=0 extruder: target=210 temp=210.2 pwm=0.273
Stats 66398.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65701859 bytes_read=10014366 bytes_retransmit=9 bytes_invalid=0 send_seq=1246845 receive_seq=1246845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2037 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=124977 bytes_read=386834 bytes_retransmit=0 bytes_invalid=0 send_seq=20805 receive_seq=20805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000786 adj=49999645 sd_pos=4335252 heater_bed: target=60 temp=60.0 pwm=0.098 sysload=0.27 cputime=5996.010 memavail=3264760 print_time=20432.736 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.4 pwm=0.273
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66399.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65706470 bytes_read=10015017 bytes_retransmit=9 bytes_invalid=0 send_seq=1246932 receive_seq=1246932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=2292 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124983 bytes_read=386863 bytes_retransmit=0 bytes_invalid=0 send_seq=20806 receive_seq=20806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000791 adj=49999663 sd_pos=4335837 heater_bed: target=60 temp=60.0 pwm=0.279 sysload=0.33 cputime=5996.220 memavail=3263528 print_time=20433.792 buffer_time=2.135 print_stall=0 extruder: target=210 temp=210.4 pwm=0.273
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66400.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65712766 bytes_read=10015789 bytes_retransmit=9 bytes_invalid=0 send_seq=1247046 receive_seq=1247046 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=2962 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124989 bytes_read=386879 bytes_retransmit=0 bytes_invalid=0 send_seq=20807 receive_seq=20807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000788 adj=49999716 sd_pos=4336672 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.33 cputime=5996.411 memavail=3263536 print_time=20435.063 buffer_time=2.405 print_stall=0 extruder: target=210 temp=210.3 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66401.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65717686 bytes_read=10016466 bytes_retransmit=9 bytes_invalid=0 send_seq=1247139 receive_seq=1247139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=11118 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=124995 bytes_read=386895 bytes_retransmit=0 bytes_invalid=0 send_seq=20808 receive_seq=20808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000784 adj=49999687 sd_pos=4338924 heater_bed: target=60 temp=60.0 pwm=0.287 sysload=0.33 cputime=5996.518 memavail=3263032 print_time=20436.378 buffer_time=2.719 print_stall=0 extruder: target=210 temp=210.1 pwm=0.331
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66402.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65722113 bytes_read=10017097 bytes_retransmit=9 bytes_invalid=0 send_seq=1247222 receive_seq=1247222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=20539 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125001 bytes_read=386911 bytes_retransmit=0 bytes_invalid=0 send_seq=20809 receive_seq=20809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000782 adj=49999701 sd_pos=4341221 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.33 cputime=5996.680 memavail=3263032 print_time=20437.745 buffer_time=3.086 print_stall=0 extruder: target=210 temp=209.6 pwm=0.447
Stats 66403.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65732224 bytes_read=10018195 bytes_retransmit=9 bytes_invalid=0 send_seq=1247398 receive_seq=1247398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=11458 freq=400007703 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125007 bytes_read=386927 bytes_retransmit=0 bytes_invalid=0 send_seq=20810 receive_seq=20810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000778 adj=49999716 sd_pos=4341221 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.33 cputime=5996.727 memavail=3263288 print_time=20437.745 buffer_time=2.085 print_stall=0 extruder: target=210 temp=209.2 pwm=0.504
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66404.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65742961 bytes_read=10019352 bytes_retransmit=9 bytes_invalid=0 send_seq=1247586 receive_seq=1247586 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=15200 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125013 bytes_read=386956 bytes_retransmit=0 bytes_invalid=0 send_seq=20811 receive_seq=20811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000774 adj=49999660 sd_pos=4343600 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.30 cputime=5996.847 memavail=3263288 print_time=20439.126 buffer_time=2.465 print_stall=0 extruder: target=210 temp=208.7 pwm=0.504
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66405.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65753825 bytes_read=10020508 bytes_retransmit=9 bytes_invalid=0 send_seq=1247774 receive_seq=1247774 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=20812 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125019 bytes_read=386972 bytes_retransmit=0 bytes_invalid=0 send_seq=20812 receive_seq=20812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000771 adj=49999637 sd_pos=4346079 heater_bed: target=60 temp=60.0 pwm=0.213 sysload=0.30 cputime=5996.965 memavail=3263544 print_time=20440.599 buffer_time=2.938 print_stall=0 extruder: target=210 temp=208.4 pwm=0.504
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66406.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65764646 bytes_read=10021655 bytes_retransmit=9 bytes_invalid=0 send_seq=1247964 receive_seq=1247963 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=26438 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125025 bytes_read=386988 bytes_retransmit=0 bytes_invalid=0 send_seq=20813 receive_seq=20813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000770 adj=49999665 sd_pos=4348678 heater_bed: target=60 temp=60.0 pwm=0.034 sysload=0.30 cputime=5997.079 memavail=3264284 print_time=20442.113 buffer_time=3.448 print_stall=0 extruder: target=210 temp=208.4 pwm=0.504
Stats 66407.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65775978 bytes_read=10022862 bytes_retransmit=9 bytes_invalid=0 send_seq=1248161 receive_seq=1248161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=16244 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125031 bytes_read=387004 bytes_retransmit=0 bytes_invalid=0 send_seq=20814 receive_seq=20814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000769 adj=49999712 sd_pos=4348678 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.30 cputime=5997.134 memavail=3268428 print_time=20442.113 buffer_time=2.448 print_stall=0 extruder: target=210 temp=208.5 pwm=0.454
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66408.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65787598 bytes_read=10024109 bytes_retransmit=9 bytes_invalid=0 send_seq=1248364 receive_seq=1248364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=19772 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125037 bytes_read=387020 bytes_retransmit=0 bytes_invalid=0 send_seq=20815 receive_seq=20815 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000766 adj=49999710 sd_pos=4350922 heater_bed: target=60 temp=60.0 pwm=0.186 sysload=0.30 cputime=5997.303 memavail=3267940 print_time=20443.535 buffer_time=2.870 print_stall=0 extruder: target=210 temp=209.1 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66409.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65798705 bytes_read=10025281 bytes_retransmit=9 bytes_invalid=0 send_seq=1248558 receive_seq=1248558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=22114 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125043 bytes_read=387049 bytes_retransmit=0 bytes_invalid=0 send_seq=20816 receive_seq=20816 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000764 adj=49999682 sd_pos=4352976 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.28 cputime=5997.420 memavail=3266680 print_time=20444.801 buffer_time=3.134 print_stall=0 extruder: target=210 temp=209.6 pwm=0.326
Stats 66410.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65809654 bytes_read=10026448 bytes_retransmit=9 bytes_invalid=0 send_seq=1248748 receive_seq=1248748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=12252 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125049 bytes_read=387064 bytes_retransmit=0 bytes_invalid=0 send_seq=20817 receive_seq=20817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000762 adj=49999721 sd_pos=4352976 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.28 cputime=5997.469 memavail=3266696 print_time=20444.801 buffer_time=2.134 print_stall=0 extruder: target=210 temp=210.1 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66411.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65820621 bytes_read=10027613 bytes_retransmit=9 bytes_invalid=0 send_seq=1248938 receive_seq=1248938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=15313 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125055 bytes_read=387079 bytes_retransmit=0 bytes_invalid=0 send_seq=20818 receive_seq=20818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000759 adj=49999648 sd_pos=4355100 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.28 cputime=5997.587 memavail=3266208 print_time=20446.104 buffer_time=2.436 print_stall=0 extruder: target=210 temp=210.9 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66412.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=65831273 bytes_read=10028695 bytes_retransmit=9 bytes_invalid=0 send_seq=1249115 receive_seq=1249115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=17698 freq=400007694 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125061 bytes_read=387094 bytes_retransmit=0 bytes_invalid=0 send_seq=20819 receive_seq=20819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000757 adj=49999624 sd_pos=4357056 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.28 cputime=5997.704 memavail=3266208 print_time=20447.400 buffer_time=2.732 print_stall=0 extruder: target=210 temp=211.3 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66413.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65842540 bytes_read=10029868 bytes_retransmit=9 bytes_invalid=0 send_seq=1249303 receive_seq=1249303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=21546 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125067 bytes_read=387109 bytes_retransmit=0 bytes_invalid=0 send_seq=20820 receive_seq=20820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000762 adj=49999652 sd_pos=4359391 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.28 cputime=5997.871 memavail=3266208 print_time=20448.803 buffer_time=3.134 print_stall=0 extruder: target=210 temp=211.5 pwm=0.202
Stats 66414.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65852638 bytes_read=10030934 bytes_retransmit=9 bytes_invalid=0 send_seq=1249473 receive_seq=1249473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12422 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125073 bytes_read=387137 bytes_retransmit=0 bytes_invalid=0 send_seq=20821 receive_seq=20821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000761 adj=49999747 sd_pos=4359391 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.26 cputime=5997.917 memavail=3266208 print_time=20448.803 buffer_time=2.133 print_stall=0 extruder: target=210 temp=211.6 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66415.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65863553 bytes_read=10032081 bytes_retransmit=9 bytes_invalid=0 send_seq=1249662 receive_seq=1249662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=18695 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125079 bytes_read=387152 bytes_retransmit=0 bytes_invalid=0 send_seq=20822 receive_seq=20822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000765 adj=49999755 sd_pos=4362019 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.26 cputime=5998.031 memavail=3266208 print_time=20450.311 buffer_time=2.640 print_stall=0 extruder: target=210 temp=211.5 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66416.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65874773 bytes_read=10033268 bytes_retransmit=9 bytes_invalid=0 send_seq=1249856 receive_seq=1249856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=23766 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125085 bytes_read=387168 bytes_retransmit=0 bytes_invalid=0 send_seq=20823 receive_seq=20823 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000761 adj=49999765 sd_pos=4364484 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=0.26 cputime=5998.146 memavail=3266208 print_time=20451.809 buffer_time=3.138 print_stall=0 extruder: target=210 temp=211.2 pwm=0.264
Stats 66417.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65886311 bytes_read=10034489 bytes_retransmit=9 bytes_invalid=0 send_seq=1250057 receive_seq=1250057 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=13376 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125091 bytes_read=387184 bytes_retransmit=0 bytes_invalid=0 send_seq=20824 receive_seq=20824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000757 adj=49999758 sd_pos=4364484 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.26 cputime=5998.196 memavail=3266208 print_time=20451.809 buffer_time=2.137 print_stall=0 extruder: target=210 temp=210.8 pwm=0.320
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66418.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65898160 bytes_read=10035692 bytes_retransmit=9 bytes_invalid=0 send_seq=1250254 receive_seq=1250254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16671 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125097 bytes_read=387200 bytes_retransmit=0 bytes_invalid=0 send_seq=20825 receive_seq=20825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000752 adj=49999736 sd_pos=4366951 heater_bed: target=60 temp=60.0 pwm=0.178 sysload=0.26 cputime=5998.322 memavail=3266208 print_time=20453.217 buffer_time=2.545 print_stall=0 extruder: target=210 temp=210.4 pwm=0.375
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66419.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65909363 bytes_read=10036884 bytes_retransmit=9 bytes_invalid=0 send_seq=1250449 receive_seq=1250449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=14527 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125103 bytes_read=387229 bytes_retransmit=0 bytes_invalid=0 send_seq=20826 receive_seq=20826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000759 adj=49999649 sd_pos=4368410 heater_bed: target=60 temp=60.0 pwm=0.088 sysload=0.23 cputime=5998.474 memavail=3266220 print_time=20454.056 buffer_time=2.383 print_stall=0 extruder: target=210 temp=209.9 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66420.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65920309 bytes_read=10038020 bytes_retransmit=9 bytes_invalid=0 send_seq=1250633 receive_seq=1250633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=10214 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125109 bytes_read=387245 bytes_retransmit=0 bytes_invalid=0 send_seq=20827 receive_seq=20827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000754 adj=49999732 sd_pos=4369589 heater_bed: target=60 temp=60.0 pwm=0.200 sysload=0.23 cputime=5998.552 memavail=3266220 print_time=20454.747 buffer_time=2.073 print_stall=0 extruder: target=210 temp=209.5 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66421.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65931006 bytes_read=10039162 bytes_retransmit=9 bytes_invalid=0 send_seq=1250821 receive_seq=1250821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=7359 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125115 bytes_read=387261 bytes_retransmit=0 bytes_invalid=0 send_seq=20828 receive_seq=20828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000752 adj=49999687 sd_pos=4373555 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.23 cputime=5998.643 memavail=3265716 print_time=20455.904 buffer_time=2.229 print_stall=0 extruder: target=210 temp=209.3 pwm=0.425
Stats 66422.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65939899 bytes_read=10040161 bytes_retransmit=9 bytes_invalid=0 send_seq=1250978 receive_seq=1250978 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=3066 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125121 bytes_read=387277 bytes_retransmit=0 bytes_invalid=0 send_seq=20829 receive_seq=20829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000747 adj=49999713 sd_pos=4373599 heater_bed: target=60 temp=60.0 pwm=0.142 sysload=0.23 cputime=5998.863 memavail=3264960 print_time=20456.884 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.3 pwm=0.425
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66423.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65946915 bytes_read=10040990 bytes_retransmit=9 bytes_invalid=0 send_seq=1251098 receive_seq=1251098 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1432 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125127 bytes_read=387293 bytes_retransmit=0 bytes_invalid=0 send_seq=20830 receive_seq=20830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000742 adj=49999681 sd_pos=4374876 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.23 cputime=5999.002 memavail=3264708 print_time=20457.877 buffer_time=2.199 print_stall=0 extruder: target=210 temp=209.4 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66424.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65951417 bytes_read=10041577 bytes_retransmit=9 bytes_invalid=0 send_seq=1251175 receive_seq=1251175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2525 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125133 bytes_read=387322 bytes_retransmit=0 bytes_invalid=0 send_seq=20831 receive_seq=20831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000740 adj=49999652 sd_pos=4378141 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.22 cputime=5999.141 memavail=3264456 print_time=20458.859 buffer_time=2.167 print_stall=0 extruder: target=210 temp=209.6 pwm=0.343
Stats 66425.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65956244 bytes_read=10042249 bytes_retransmit=9 bytes_invalid=0 send_seq=1251266 receive_seq=1251266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1693 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125139 bytes_read=387338 bytes_retransmit=0 bytes_invalid=0 send_seq=20832 receive_seq=20832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000738 adj=49999671 sd_pos=4378141 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.22 cputime=5999.304 memavail=3264456 print_time=20459.704 buffer_time=2.011 print_stall=0 extruder: target=210 temp=209.7 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66426.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65962657 bytes_read=10043055 bytes_retransmit=9 bytes_invalid=0 send_seq=1251384 receive_seq=1251384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=11654 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125145 bytes_read=387354 bytes_retransmit=0 bytes_invalid=0 send_seq=20833 receive_seq=20833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000733 adj=49999679 sd_pos=4380322 heater_bed: target=60 temp=60.0 pwm=0.055 sysload=0.22 cputime=5999.539 memavail=3264460 print_time=20461.921 buffer_time=3.181 print_stall=0 extruder: target=210 temp=209.8 pwm=0.343
Stats 66427.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=65967330 bytes_read=10043702 bytes_retransmit=9 bytes_invalid=0 send_seq=1251473 receive_seq=1251473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=7571 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125151 bytes_read=387370 bytes_retransmit=0 bytes_invalid=0 send_seq=20834 receive_seq=20834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000730 adj=49999707 sd_pos=4380322 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.22 cputime=5999.572 memavail=3264220 print_time=20461.921 buffer_time=2.180 print_stall=0 extruder: target=210 temp=209.9 pwm=0.343
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66428.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65972296 bytes_read=10044404 bytes_retransmit=9 bytes_invalid=0 send_seq=1251564 receive_seq=1251564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=17785 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125157 bytes_read=387386 bytes_retransmit=0 bytes_invalid=0 send_seq=20835 receive_seq=20835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000726 adj=49999683 sd_pos=4382523 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.22 cputime=5999.676 memavail=3263972 print_time=20463.373 buffer_time=2.631 print_stall=0 extruder: target=210 temp=209.7 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66429.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65983426 bytes_read=10045576 bytes_retransmit=9 bytes_invalid=0 send_seq=1251758 receive_seq=1251758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=23260 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125163 bytes_read=387415 bytes_retransmit=0 bytes_invalid=0 send_seq=20836 receive_seq=20836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000724 adj=49999612 sd_pos=4384881 heater_bed: target=60 temp=60.0 pwm=0.249 sysload=0.28 cputime=5999.798 memavail=3263748 print_time=20464.843 buffer_time=3.099 print_stall=0 extruder: target=210 temp=209.5 pwm=0.393
Stats 66430.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=65994541 bytes_read=10046748 bytes_retransmit=9 bytes_invalid=0 send_seq=1251952 receive_seq=1251952 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=13258 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125169 bytes_read=387431 bytes_retransmit=0 bytes_invalid=0 send_seq=20837 receive_seq=20837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000735 adj=49999661 sd_pos=4384881 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.28 cputime=5999.890 memavail=3263748 print_time=20464.843 buffer_time=2.098 print_stall=0 extruder: target=210 temp=209.3 pwm=0.450
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66431.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66005929 bytes_read=10047974 bytes_retransmit=9 bytes_invalid=0 send_seq=1252151 receive_seq=1252151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=17802 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125175 bytes_read=387447 bytes_retransmit=0 bytes_invalid=0 send_seq=20838 receive_seq=20838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000733 adj=49999739 sd_pos=4387059 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.28 cputime=6000.041 memavail=3263748 print_time=20466.271 buffer_time=2.526 print_stall=0 extruder: target=210 temp=209.1 pwm=0.450
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66432.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66017889 bytes_read=10049171 bytes_retransmit=9 bytes_invalid=0 send_seq=1252350 receive_seq=1252350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=21065 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125181 bytes_read=387463 bytes_retransmit=0 bytes_invalid=0 send_seq=20839 receive_seq=20839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000729 adj=49999733 sd_pos=4389399 heater_bed: target=60 temp=60.0 pwm=0.158 sysload=0.28 cputime=6000.164 memavail=3263748 print_time=20467.664 buffer_time=2.918 print_stall=0 extruder: target=210 temp=209.1 pwm=0.450
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66433.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66029606 bytes_read=10050409 bytes_retransmit=9 bytes_invalid=0 send_seq=1252555 receive_seq=1252555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=23111 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125187 bytes_read=387479 bytes_retransmit=0 bytes_invalid=0 send_seq=20840 receive_seq=20840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000725 adj=49999724 sd_pos=4391590 heater_bed: target=60 temp=60.0 pwm=0.238 sysload=0.28 cputime=6000.282 memavail=3263748 print_time=20468.923 buffer_time=3.178 print_stall=0 extruder: target=210 temp=209.2 pwm=0.450
Stats 66434.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66040801 bytes_read=10051575 bytes_retransmit=9 bytes_invalid=0 send_seq=1252742 receive_seq=1252742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=13018 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125193 bytes_read=387495 bytes_retransmit=0 bytes_invalid=0 send_seq=20841 receive_seq=20841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000721 adj=49999681 sd_pos=4391590 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.26 cputime=6000.332 memavail=3263748 print_time=20468.923 buffer_time=2.176 print_stall=0 extruder: target=210 temp=209.4 pwm=0.390
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66435.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66051990 bytes_read=10052747 bytes_retransmit=9 bytes_invalid=0 send_seq=1252936 receive_seq=1252936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=15423 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125199 bytes_read=387524 bytes_retransmit=0 bytes_invalid=0 send_seq=20842 receive_seq=20842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000717 adj=49999621 sd_pos=4393651 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.26 cputime=6000.453 memavail=3263748 print_time=20470.183 buffer_time=2.436 print_stall=0 extruder: target=210 temp=209.8 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66436.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66063150 bytes_read=10053904 bytes_retransmit=9 bytes_invalid=0 send_seq=1253124 receive_seq=1253124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=18042 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125205 bytes_read=387540 bytes_retransmit=0 bytes_invalid=0 send_seq=20843 receive_seq=20843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000718 adj=49999582 sd_pos=4395682 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.26 cputime=6000.649 memavail=3263748 print_time=20471.474 buffer_time=2.725 print_stall=0 extruder: target=210 temp=210.2 pwm=0.278
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66437.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66073443 bytes_read=10054980 bytes_retransmit=9 bytes_invalid=0 send_seq=1253296 receive_seq=1253296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=22465 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125211 bytes_read=387556 bytes_retransmit=0 bytes_invalid=0 send_seq=20844 receive_seq=20844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000714 adj=49999633 sd_pos=4397977 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.26 cputime=6000.768 memavail=3263748 print_time=20472.820 buffer_time=3.071 print_stall=0 extruder: target=210 temp=210.7 pwm=0.278
Stats 66438.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66084894 bytes_read=10056198 bytes_retransmit=9 bytes_invalid=0 send_seq=1253496 receive_seq=1253496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=12180 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125217 bytes_read=387572 bytes_retransmit=0 bytes_invalid=0 send_seq=20845 receive_seq=20845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000710 adj=49999634 sd_pos=4397977 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.26 cputime=6000.819 memavail=3263748 print_time=20472.820 buffer_time=2.070 print_stall=0 extruder: target=210 temp=211.0 pwm=0.223
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66439.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66096090 bytes_read=10057390 bytes_retransmit=9 bytes_invalid=0 send_seq=1253691 receive_seq=1253691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15593 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125223 bytes_read=387588 bytes_retransmit=0 bytes_invalid=0 send_seq=20846 receive_seq=20846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000706 adj=49999603 sd_pos=4400139 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.24 cputime=6000.938 memavail=3263392 print_time=20474.160 buffer_time=2.409 print_stall=0 extruder: target=210 temp=211.2 pwm=0.223
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66440.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66107327 bytes_read=10058591 bytes_retransmit=9 bytes_invalid=0 send_seq=1253888 receive_seq=1253888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=20725 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125229 bytes_read=387617 bytes_retransmit=0 bytes_invalid=0 send_seq=20847 receive_seq=20847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000702 adj=49999569 sd_pos=4402798 heater_bed: target=60 temp=60.0 pwm=0.050 sysload=0.24 cputime=6001.054 memavail=3263508 print_time=20475.614 buffer_time=2.863 print_stall=0 extruder: target=210 temp=211.4 pwm=0.223
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66441.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66118611 bytes_read=10059778 bytes_retransmit=9 bytes_invalid=0 send_seq=1254085 receive_seq=1254085 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=25125 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125235 bytes_read=387633 bytes_retransmit=0 bytes_invalid=0 send_seq=20848 receive_seq=20848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000699 adj=49999601 sd_pos=4405079 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.24 cputime=6001.226 memavail=3263508 print_time=20477.049 buffer_time=3.297 print_stall=0 extruder: target=210 temp=211.2 pwm=0.275
Stats 66442.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66130166 bytes_read=10061010 bytes_retransmit=9 bytes_invalid=0 send_seq=1254288 receive_seq=1254288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=14717 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125241 bytes_read=387649 bytes_retransmit=0 bytes_invalid=0 send_seq=20849 receive_seq=20849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000697 adj=49999631 sd_pos=4405079 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.24 cputime=6001.276 memavail=3263508 print_time=20477.049 buffer_time=2.296 print_stall=0 extruder: target=210 temp=211.0 pwm=0.275
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66443.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66141750 bytes_read=10062247 bytes_retransmit=9 bytes_invalid=0 send_seq=1254489 receive_seq=1254489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=17537 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125247 bytes_read=387665 bytes_retransmit=0 bytes_invalid=0 send_seq=20850 receive_seq=20850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000693 adj=49999621 sd_pos=4407074 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.24 cputime=6001.398 memavail=3263508 print_time=20478.359 buffer_time=2.606 print_stall=0 extruder: target=210 temp=210.7 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66444.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66152785 bytes_read=10063365 bytes_retransmit=9 bytes_invalid=0 send_seq=1254673 receive_seq=1254673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=21048 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125253 bytes_read=387681 bytes_retransmit=0 bytes_invalid=0 send_seq=20851 receive_seq=20851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000690 adj=49999600 sd_pos=4408831 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.30 cputime=6001.521 memavail=3263508 print_time=20479.631 buffer_time=2.876 print_stall=0 extruder: target=210 temp=210.4 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66445.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66164101 bytes_read=10064557 bytes_retransmit=9 bytes_invalid=0 send_seq=1254868 receive_seq=1254868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=18728 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125259 bytes_read=387710 bytes_retransmit=0 bytes_invalid=0 send_seq=20852 receive_seq=20852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000687 adj=49999606 sd_pos=4410275 heater_bed: target=60 temp=60.0 pwm=0.164 sysload=0.30 cputime=6001.613 memavail=3263508 print_time=20480.371 buffer_time=2.616 print_stall=0 extruder: target=210 temp=210.1 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66446.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66175888 bytes_read=10065808 bytes_retransmit=9 bytes_invalid=0 send_seq=1255075 receive_seq=1255075 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=10673 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125265 bytes_read=387726 bytes_retransmit=0 bytes_invalid=0 send_seq=20853 receive_seq=20853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000683 adj=49999578 sd_pos=4411290 heater_bed: target=60 temp=60.0 pwm=0.243 sysload=0.30 cputime=6001.680 memavail=3263508 print_time=20480.783 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.7 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66447.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66187482 bytes_read=10067025 bytes_retransmit=9 bytes_invalid=0 send_seq=1255278 receive_seq=1255278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=6515 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125271 bytes_read=387742 bytes_retransmit=0 bytes_invalid=0 send_seq=20854 receive_seq=20854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000682 adj=49999544 sd_pos=4414517 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.30 cputime=6001.893 memavail=3263508 print_time=20481.877 buffer_time=2.120 print_stall=0 extruder: target=210 temp=209.6 pwm=0.387
Stats 66448.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66196220 bytes_read=10068018 bytes_retransmit=9 bytes_invalid=0 send_seq=1255430 receive_seq=1255430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1798 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125277 bytes_read=387758 bytes_retransmit=0 bytes_invalid=0 send_seq=20855 receive_seq=20855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000686 adj=49999519 sd_pos=4414605 heater_bed: target=60 temp=60.0 pwm=0.042 sysload=0.30 cputime=6002.204 memavail=3261492 print_time=20482.877 buffer_time=2.119 print_stall=0 extruder: target=210 temp=209.5 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66449.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66203055 bytes_read=10068814 bytes_retransmit=9 bytes_invalid=0 send_seq=1255546 receive_seq=1255546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=630 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125283 bytes_read=387774 bytes_retransmit=0 bytes_invalid=0 send_seq=20856 receive_seq=20856 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000682 adj=49999602 sd_pos=4416422 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.27 cputime=6002.316 memavail=3261920 print_time=20483.875 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.5 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66450.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66206570 bytes_read=10069361 bytes_retransmit=9 bytes_invalid=0 send_seq=1255615 receive_seq=1255615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=3409 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125289 bytes_read=387803 bytes_retransmit=0 bytes_invalid=0 send_seq=20857 receive_seq=20857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000680 adj=49999591 sd_pos=4419196 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.27 cputime=6002.426 memavail=3262008 print_time=20484.952 buffer_time=2.192 print_stall=0 extruder: target=210 temp=209.6 pwm=0.386
Stats 66451.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66212038 bytes_read=10070043 bytes_retransmit=9 bytes_invalid=0 send_seq=1255708 receive_seq=1255708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=1586 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125295 bytes_read=387819 bytes_retransmit=0 bytes_invalid=0 send_seq=20858 receive_seq=20858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000678 adj=49999599 sd_pos=4419294 heater_bed: target=60 temp=60.0 pwm=0.236 sysload=0.27 cputime=6002.632 memavail=3262008 print_time=20485.953 buffer_time=2.193 print_stall=0 extruder: target=210 temp=209.7 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66452.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66218563 bytes_read=10070804 bytes_retransmit=9 bytes_invalid=0 send_seq=1255817 receive_seq=1255817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=11329 freq=400007597 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125301 bytes_read=387835 bytes_retransmit=0 bytes_invalid=0 send_seq=20859 receive_seq=20859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000675 adj=49999612 sd_pos=4421828 heater_bed: target=60 temp=60.0 pwm=0.134 sysload=0.27 cputime=6002.772 memavail=3262008 print_time=20487.723 buffer_time=2.961 print_stall=0 extruder: target=210 temp=209.5 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66453.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=66222532 bytes_read=10071407 bytes_retransmit=9 bytes_invalid=0 send_seq=1255895 receive_seq=1255894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=7965 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125313 bytes_read=387867 bytes_retransmit=0 bytes_invalid=0 send_seq=20861 receive_seq=20861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000677 adj=49999644 sd_pos=4423676 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.27 cputime=6002.861 memavail=3261000 print_time=20487.723 buffer_time=1.955 print_stall=0 extruder: target=210 temp=209.4 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66454.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=66229813 bytes_read=10072289 bytes_retransmit=9 bytes_invalid=0 send_seq=1256025 receive_seq=1256025 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=18572 freq=400007725 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125319 bytes_read=387883 bytes_retransmit=0 bytes_invalid=0 send_seq=20862 receive_seq=20862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000674 adj=49999540 sd_pos=4424654 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.25 cputime=6002.973 memavail=3261000 print_time=20489.315 buffer_time=2.547 print_stall=0 extruder: target=210 temp=209.4 pwm=0.400
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66455.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=66241819 bytes_read=10073547 bytes_retransmit=9 bytes_invalid=0 send_seq=1256234 receive_seq=1256234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=23221 freq=400007718 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=125325 bytes_read=387912 bytes_retransmit=0 bytes_invalid=0 send_seq=20863 receive_seq=20863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000670 adj=49999493 sd_pos=4427172 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.25 cputime=6003.082 memavail=3265988 print_time=20490.792 buffer_time=3.023 print_stall=0 extruder: target=210 temp=209.2 pwm=0.458
Stats 66456.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=66253659 bytes_read=10074764 bytes_retransmit=9 bytes_invalid=0 send_seq=1256437 receive_seq=1256437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=12585 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=125331 bytes_read=387928 bytes_retransmit=0 bytes_invalid=0 send_seq=20864 receive_seq=20864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000668 adj=49999542 sd_pos=4427172 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.25 cputime=6003.131 memavail=3266020 print_time=20490.792 buffer_time=2.022 print_stall=0 extruder: target=210 temp=209.0 pwm=0.458
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66457.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=66265442 bytes_read=10076011 bytes_retransmit=9 bytes_invalid=0 send_seq=1256643 receive_seq=1256643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=17985 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=125337 bytes_read=387944 bytes_retransmit=0 bytes_invalid=0 send_seq=20865 receive_seq=20865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000664 adj=49999540 sd_pos=4429750 heater_bed: target=60 temp=60.0 pwm=0.265 sysload=0.25 cputime=6003.241 memavail=3266032 print_time=20492.334 buffer_time=2.564 print_stall=0 extruder: target=210 temp=209.0 pwm=0.458
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66458.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66277100 bytes_read=10077258 bytes_retransmit=9 bytes_invalid=0 send_seq=1256846 receive_seq=1256846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=23521 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=125343 bytes_read=387960 bytes_retransmit=0 bytes_invalid=0 send_seq=20866 receive_seq=20866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000660 adj=49999537 sd_pos=4432281 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.25 cputime=6003.350 memavail=3265792 print_time=20493.855 buffer_time=3.084 print_stall=0 extruder: target=210 temp=209.2 pwm=0.458
Stats 66459.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66288567 bytes_read=10078435 bytes_retransmit=9 bytes_invalid=0 send_seq=1257041 receive_seq=1257041 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=13144 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000014 bytes_write=125349 bytes_read=387976 bytes_retransmit=0 bytes_invalid=0 send_seq=20867 receive_seq=20867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000660 adj=49999571 sd_pos=4432281 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.23 cputime=6003.431 memavail=3265672 print_time=20493.855 buffer_time=2.083 print_stall=0 extruder: target=210 temp=209.5 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66460.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66300341 bytes_read=10079687 bytes_retransmit=9 bytes_invalid=0 send_seq=1257248 receive_seq=1257248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=16145 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125355 bytes_read=388005 bytes_retransmit=0 bytes_invalid=0 send_seq=20868 receive_seq=20868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000656 adj=49999570 sd_pos=4434343 heater_bed: target=60 temp=60.0 pwm=0.265 sysload=0.23 cputime=6003.570 memavail=3265792 print_time=20495.201 buffer_time=2.429 print_stall=0 extruder: target=210 temp=209.8 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66461.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66311967 bytes_read=10080918 bytes_retransmit=9 bytes_invalid=0 send_seq=1257451 receive_seq=1257451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=21255 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125361 bytes_read=388021 bytes_retransmit=0 bytes_invalid=0 send_seq=20869 receive_seq=20869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000652 adj=49999550 sd_pos=4436833 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.23 cputime=6003.682 memavail=3265792 print_time=20496.713 buffer_time=2.940 print_stall=0 extruder: target=210 temp=210.3 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66462.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66322975 bytes_read=10082050 bytes_retransmit=9 bytes_invalid=0 send_seq=1257637 receive_seq=1257637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=26216 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125367 bytes_read=388037 bytes_retransmit=0 bytes_invalid=0 send_seq=20870 receive_seq=20870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000649 adj=49999571 sd_pos=4439153 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.23 cputime=6003.785 memavail=3265792 print_time=20498.156 buffer_time=3.381 print_stall=0 extruder: target=210 temp=210.8 pwm=0.257
Stats 66463.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66334563 bytes_read=10083298 bytes_retransmit=9 bytes_invalid=0 send_seq=1257840 receive_seq=1257840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=15810 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125373 bytes_read=388053 bytes_retransmit=0 bytes_invalid=0 send_seq=20871 receive_seq=20871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000649 adj=49999589 sd_pos=4439153 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.23 cputime=6003.835 memavail=3265796 print_time=20498.156 buffer_time=2.381 print_stall=0 extruder: target=210 temp=211.0 pwm=0.257
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66464.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66346035 bytes_read=10084469 bytes_retransmit=9 bytes_invalid=0 send_seq=1258031 receive_seq=1258031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=21671 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125379 bytes_read=388069 bytes_retransmit=0 bytes_invalid=0 send_seq=20872 receive_seq=20872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000646 adj=49999609 sd_pos=4441832 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.21 cputime=6003.942 memavail=3265796 print_time=20499.703 buffer_time=2.927 print_stall=0 extruder: target=210 temp=211.4 pwm=0.201
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66465.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66357567 bytes_read=10085677 bytes_retransmit=9 bytes_invalid=0 send_seq=1258233 receive_seq=1258233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=28560 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125385 bytes_read=388098 bytes_retransmit=0 bytes_invalid=0 send_seq=20873 receive_seq=20873 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000658 adj=49999585 sd_pos=4444374 heater_bed: target=60 temp=60.0 pwm=0.188 sysload=0.21 cputime=6004.113 memavail=3265796 print_time=20501.309 buffer_time=3.517 print_stall=0 extruder: target=210 temp=211.5 pwm=0.201
Stats 66466.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66369131 bytes_read=10086902 bytes_retransmit=9 bytes_invalid=0 send_seq=1258435 receive_seq=1258435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=18172 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125391 bytes_read=388114 bytes_retransmit=0 bytes_invalid=0 send_seq=20874 receive_seq=20874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000656 adj=49999699 sd_pos=4444374 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.21 cputime=6004.166 memavail=3265796 print_time=20501.309 buffer_time=2.517 print_stall=0 extruder: target=210 temp=211.3 pwm=0.282
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66467.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66380956 bytes_read=10088098 bytes_retransmit=9 bytes_invalid=0 send_seq=1258631 receive_seq=1258631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=23576 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125397 bytes_read=388130 bytes_retransmit=0 bytes_invalid=0 send_seq=20875 receive_seq=20875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000651 adj=49999691 sd_pos=4446855 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.21 cputime=6004.271 memavail=3265796 print_time=20502.821 buffer_time=3.028 print_stall=0 extruder: target=210 temp=211.1 pwm=0.282
Stats 66468.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66392944 bytes_read=10089361 bytes_retransmit=9 bytes_invalid=0 send_seq=1258840 receive_seq=1258840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=12804 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125403 bytes_read=388146 bytes_retransmit=0 bytes_invalid=0 send_seq=20876 receive_seq=20876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000647 adj=49999649 sd_pos=4446855 heater_bed: target=60 temp=60.0 pwm=0.053 sysload=0.21 cputime=6004.320 memavail=3265796 print_time=20502.821 buffer_time=2.028 print_stall=0 extruder: target=210 temp=210.8 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66469.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66404918 bytes_read=10090628 bytes_retransmit=9 bytes_invalid=0 send_seq=1259050 receive_seq=1259050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=17002 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125409 bytes_read=388162 bytes_retransmit=0 bytes_invalid=0 send_seq=20877 receive_seq=20877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000644 adj=49999581 sd_pos=4449107 heater_bed: target=60 temp=60.0 pwm=0.131 sysload=0.19 cputime=6004.422 memavail=3266520 print_time=20504.293 buffer_time=2.500 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66470.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66416528 bytes_read=10091859 bytes_retransmit=9 bytes_invalid=0 send_seq=1259253 receive_seq=1259253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=21523 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125415 bytes_read=388191 bytes_retransmit=0 bytes_invalid=0 send_seq=20878 receive_seq=20878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000640 adj=49999562 sd_pos=4451380 heater_bed: target=60 temp=60.0 pwm=0.226 sysload=0.19 cputime=6004.526 memavail=3266560 print_time=20505.749 buffer_time=2.955 print_stall=0 extruder: target=210 temp=210.0 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66471.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66428756 bytes_read=10093151 bytes_retransmit=9 bytes_invalid=0 send_seq=1259468 receive_seq=1259468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=25555 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125421 bytes_read=388207 bytes_retransmit=0 bytes_invalid=0 send_seq=20879 receive_seq=20879 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000639 adj=49999580 sd_pos=4453820 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.19 cputime=6004.726 memavail=3266560 print_time=20507.222 buffer_time=3.362 print_stall=0 extruder: target=210 temp=209.8 pwm=0.393
Stats 66472.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66439830 bytes_read=10094342 bytes_retransmit=9 bytes_invalid=0 send_seq=1259663 receive_seq=1259663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=15598 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125427 bytes_read=388223 bytes_retransmit=0 bytes_invalid=0 send_seq=20880 receive_seq=20880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000635 adj=49999608 sd_pos=4453820 heater_bed: target=60 temp=60.0 pwm=0.118 sysload=0.19 cputime=6004.774 memavail=3266560 print_time=20507.222 buffer_time=2.361 print_stall=0 extruder: target=210 temp=209.5 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66473.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66451390 bytes_read=10095570 bytes_retransmit=9 bytes_invalid=0 send_seq=1259865 receive_seq=1259865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=20569 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125433 bytes_read=388239 bytes_retransmit=0 bytes_invalid=0 send_seq=20881 receive_seq=20881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000631 adj=49999577 sd_pos=4456243 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.19 cputime=6004.879 memavail=3266560 print_time=20508.700 buffer_time=2.838 print_stall=0 extruder: target=210 temp=209.5 pwm=0.393
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66474.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66462621 bytes_read=10096767 bytes_retransmit=9 bytes_invalid=0 send_seq=1260061 receive_seq=1260061 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=25810 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125439 bytes_read=388255 bytes_retransmit=0 bytes_invalid=0 send_seq=20882 receive_seq=20882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000631 adj=49999544 sd_pos=4459108 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.18 cputime=6004.984 memavail=3266560 print_time=20510.170 buffer_time=3.307 print_stall=0 extruder: target=210 temp=209.4 pwm=0.403
Stats 66475.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66474015 bytes_read=10097983 bytes_retransmit=9 bytes_invalid=0 send_seq=1260261 receive_seq=1260261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=15534 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125445 bytes_read=388284 bytes_retransmit=0 bytes_invalid=0 send_seq=20883 receive_seq=20883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000628 adj=49999591 sd_pos=4459108 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.18 cputime=6005.032 memavail=3266560 print_time=20510.170 buffer_time=2.307 print_stall=0 extruder: target=210 temp=209.6 pwm=0.403
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66476.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66485789 bytes_read=10099204 bytes_retransmit=9 bytes_invalid=0 send_seq=1260466 receive_seq=1260466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=13191 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125451 bytes_read=388300 bytes_retransmit=0 bytes_invalid=0 send_seq=20884 receive_seq=20884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000630 adj=49999579 sd_pos=4460412 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.18 cputime=6005.109 memavail=3266560 print_time=20510.948 buffer_time=2.084 print_stall=0 extruder: target=210 temp=209.8 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66477.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66497563 bytes_read=10100446 bytes_retransmit=9 bytes_invalid=0 send_seq=1260671 receive_seq=1260671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=10309 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125457 bytes_read=388316 bytes_retransmit=0 bytes_invalid=0 send_seq=20885 receive_seq=20885 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000636 adj=49999580 sd_pos=4462650 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.18 cputime=6005.265 memavail=3266560 print_time=20512.006 buffer_time=2.142 print_stall=0 extruder: target=210 temp=210.0 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66478.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66509039 bytes_read=10101658 bytes_retransmit=9 bytes_invalid=0 send_seq=1260867 receive_seq=1260867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=6402 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125463 bytes_read=388332 bytes_retransmit=0 bytes_invalid=0 send_seq=20886 receive_seq=20886 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000640 adj=49999635 sd_pos=4465711 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.18 cputime=6005.491 memavail=3265564 print_time=20513.103 buffer_time=2.238 print_stall=0 extruder: target=210 temp=210.3 pwm=0.285
Stats 66479.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66516994 bytes_read=10102525 bytes_retransmit=9 bytes_invalid=0 send_seq=1261000 receive_seq=1261000 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=2598 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125469 bytes_read=388348 bytes_retransmit=0 bytes_invalid=0 send_seq=20887 receive_seq=20887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000637 adj=49999674 sd_pos=4465800 heater_bed: target=60 temp=60.1 pwm=0.000 sysload=0.16 cputime=6005.713 memavail=3263588 print_time=20514.113 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.5 pwm=0.285
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66480.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66523857 bytes_read=10103312 bytes_retransmit=9 bytes_invalid=0 send_seq=1261114 receive_seq=1261114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=1345 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=125475 bytes_read=388377 bytes_retransmit=0 bytes_invalid=0 send_seq=20888 receive_seq=20888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000633 adj=49999585 sd_pos=4467952 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.16 cputime=6005.823 memavail=3263596 print_time=20515.092 buffer_time=2.185 print_stall=0 extruder: target=210 temp=210.6 pwm=0.285
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66481.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66527963 bytes_read=10103918 bytes_retransmit=9 bytes_invalid=0 send_seq=1261192 receive_seq=1261192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=3254 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=125481 bytes_read=388393 bytes_retransmit=0 bytes_invalid=0 send_seq=20889 receive_seq=20889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000630 adj=49999550 sd_pos=4470375 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.16 cputime=6005.948 memavail=3263600 print_time=20516.169 buffer_time=2.261 print_stall=0 extruder: target=210 temp=210.7 pwm=0.285
Stats 66482.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66533227 bytes_read=10104610 bytes_retransmit=9 bytes_invalid=0 send_seq=1261290 receive_seq=1261290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=1123 freq=400007760 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=125487 bytes_read=388409 bytes_retransmit=0 bytes_invalid=0 send_seq=20890 receive_seq=20890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000630 adj=49999536 sd_pos=4470494 heater_bed: target=60 temp=60.0 pwm=0.101 sysload=0.16 cputime=6006.125 memavail=3263600 print_time=20516.953 buffer_time=2.045 print_stall=0 extruder: target=210 temp=210.6 pwm=0.281
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66483.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66539748 bytes_read=10105438 bytes_retransmit=9 bytes_invalid=0 send_seq=1261409 receive_seq=1261409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=14346 freq=400007738 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=125493 bytes_read=388425 bytes_retransmit=0 bytes_invalid=0 send_seq=20891 receive_seq=20891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000627 adj=49999428 sd_pos=4473270 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.16 cputime=6006.346 memavail=3263600 print_time=20519.142 buffer_time=3.233 print_stall=0 extruder: target=210 temp=210.3 pwm=0.345
Stats 66484.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66543570 bytes_read=10106024 bytes_retransmit=9 bytes_invalid=0 send_seq=1261483 receive_seq=1261483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=10997 freq=400007733 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=125499 bytes_read=388441 bytes_retransmit=0 bytes_invalid=0 send_seq=20892 receive_seq=20892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000627 adj=49999577 sd_pos=4473270 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.15 cputime=6006.409 memavail=3263600 print_time=20519.142 buffer_time=2.233 print_stall=0 extruder: target=210 temp=209.8 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66485.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66550587 bytes_read=10106861 bytes_retransmit=9 bytes_invalid=0 send_seq=1261610 receive_seq=1261610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=19164 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125505 bytes_read=388470 bytes_retransmit=0 bytes_invalid=0 send_seq=20893 receive_seq=20893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000624 adj=49999580 sd_pos=4475205 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.15 cputime=6006.596 memavail=3263600 print_time=20520.342 buffer_time=2.432 print_stall=0 extruder: target=210 temp=209.3 pwm=0.491
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66486.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66562823 bytes_read=10108102 bytes_retransmit=9 bytes_invalid=0 send_seq=1261815 receive_seq=1261815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=21099 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125511 bytes_read=388486 bytes_retransmit=0 bytes_invalid=0 send_seq=20894 receive_seq=20894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000620 adj=49999580 sd_pos=4477232 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.15 cputime=6006.714 memavail=3263748 print_time=20521.492 buffer_time=2.581 print_stall=0 extruder: target=210 temp=208.9 pwm=0.491
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66487.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66575919 bytes_read=10109399 bytes_retransmit=9 bytes_invalid=0 send_seq=1262032 receive_seq=1262032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=24419 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125517 bytes_read=388502 bytes_retransmit=0 bytes_invalid=0 send_seq=20895 receive_seq=20895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000615 adj=49999571 sd_pos=4479416 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.15 cputime=6006.837 memavail=3263852 print_time=20522.835 buffer_time=2.923 print_stall=0 extruder: target=210 temp=208.3 pwm=0.550
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66488.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66588869 bytes_read=10110732 bytes_retransmit=9 bytes_invalid=0 send_seq=1262255 receive_seq=1262255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=29276 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125523 bytes_read=388518 bytes_retransmit=0 bytes_invalid=0 send_seq=20896 receive_seq=20896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000611 adj=49999534 sd_pos=4481709 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.15 cputime=6006.961 memavail=3263852 print_time=20524.312 buffer_time=3.399 print_stall=0 extruder: target=210 temp=208.3 pwm=0.500
Stats 66489.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66601428 bytes_read=10112029 bytes_retransmit=9 bytes_invalid=0 send_seq=1262471 receive_seq=1262471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=17948 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125529 bytes_read=388534 bytes_retransmit=0 bytes_invalid=0 send_seq=20897 receive_seq=20897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000607 adj=49999548 sd_pos=4481709 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.14 cputime=6007.012 memavail=3263348 print_time=20524.312 buffer_time=2.399 print_stall=0 extruder: target=210 temp=208.3 pwm=0.500
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66490.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66613588 bytes_read=10113300 bytes_retransmit=9 bytes_invalid=0 send_seq=1262682 receive_seq=1262682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=23696 freq=400007713 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125535 bytes_read=388563 bytes_retransmit=0 bytes_invalid=0 send_seq=20898 receive_seq=20898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000603 adj=49999523 sd_pos=4484070 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.14 cputime=6007.166 memavail=3263360 print_time=20525.779 buffer_time=2.865 print_stall=0 extruder: target=210 temp=208.6 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66491.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66626054 bytes_read=10114567 bytes_retransmit=9 bytes_invalid=0 send_seq=1262895 receive_seq=1262895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=28178 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125541 bytes_read=388579 bytes_retransmit=0 bytes_invalid=0 send_seq=20899 receive_seq=20899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000602 adj=49999457 sd_pos=4486290 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.14 cputime=6007.283 memavail=3263360 print_time=20527.217 buffer_time=3.302 print_stall=0 extruder: target=210 temp=209.1 pwm=0.386
Stats 66492.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66638786 bytes_read=10115884 bytes_retransmit=9 bytes_invalid=0 send_seq=1263115 receive_seq=1263115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=16705 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125547 bytes_read=388595 bytes_retransmit=0 bytes_invalid=0 send_seq=20900 receive_seq=20900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000601 adj=49999526 sd_pos=4486290 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.14 cputime=6007.335 memavail=3263360 print_time=20527.217 buffer_time=2.301 print_stall=0 extruder: target=210 temp=209.7 pwm=0.319
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66493.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66651168 bytes_read=10117191 bytes_retransmit=9 bytes_invalid=0 send_seq=1263330 receive_seq=1263330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=20117 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125553 bytes_read=388611 bytes_retransmit=0 bytes_invalid=0 send_seq=20901 receive_seq=20901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000600 adj=49999531 sd_pos=4488441 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.14 cputime=6007.455 memavail=3263360 print_time=20528.522 buffer_time=2.605 print_stall=0 extruder: target=210 temp=210.4 pwm=0.256
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66494.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66663312 bytes_read=10118453 bytes_retransmit=9 bytes_invalid=0 send_seq=1263542 receive_seq=1263542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=22890 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125559 bytes_read=388627 bytes_retransmit=0 bytes_invalid=0 send_seq=20902 receive_seq=20902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000595 adj=49999519 sd_pos=4490334 heater_bed: target=60 temp=60.0 pwm=0.077 sysload=0.13 cputime=6007.572 memavail=3263508 print_time=20529.739 buffer_time=2.821 print_stall=0 extruder: target=210 temp=211.0 pwm=0.201
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66495.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66676051 bytes_read=10119775 bytes_retransmit=9 bytes_invalid=0 send_seq=1263763 receive_seq=1263763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=25620 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=125565 bytes_read=388656 bytes_retransmit=0 bytes_invalid=0 send_seq=20903 receive_seq=20903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000591 adj=49999470 sd_pos=4492130 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.13 cputime=6007.768 memavail=3263612 print_time=20530.959 buffer_time=3.040 print_stall=0 extruder: target=210 temp=211.4 pwm=0.201
Stats 66496.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66688688 bytes_read=10121076 bytes_retransmit=9 bytes_invalid=0 send_seq=1263981 receive_seq=1263980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14263 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=125571 bytes_read=388671 bytes_retransmit=0 bytes_invalid=0 send_seq=20904 receive_seq=20904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000587 adj=49999474 sd_pos=4492130 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.13 cputime=6007.819 memavail=3263612 print_time=20530.959 buffer_time=2.040 print_stall=0 extruder: target=210 temp=211.5 pwm=0.201
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66497.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66700840 bytes_read=10122341 bytes_retransmit=9 bytes_invalid=0 send_seq=1264193 receive_seq=1264193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=17032 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=125577 bytes_read=388686 bytes_retransmit=0 bytes_invalid=0 send_seq=20905 receive_seq=20905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000584 adj=49999458 sd_pos=4494040 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.13 cputime=6007.935 memavail=3263612 print_time=20532.209 buffer_time=2.288 print_stall=0 extruder: target=210 temp=211.5 pwm=0.201
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66498.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66713696 bytes_read=10123686 bytes_retransmit=9 bytes_invalid=0 send_seq=1264416 receive_seq=1264416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=20968 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=125583 bytes_read=388701 bytes_retransmit=0 bytes_invalid=0 send_seq=20906 receive_seq=20906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000581 adj=49999429 sd_pos=4496362 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.13 cputime=6008.052 memavail=3263612 print_time=20533.609 buffer_time=2.688 print_stall=0 extruder: target=210 temp=211.4 pwm=0.268
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66499.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66726154 bytes_read=10124987 bytes_retransmit=9 bytes_invalid=0 send_seq=1264633 receive_seq=1264633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=27140 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=125589 bytes_read=388716 bytes_retransmit=0 bytes_invalid=0 send_seq=20907 receive_seq=20907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000579 adj=49999462 sd_pos=4498814 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.12 cputime=6008.173 memavail=3263108 print_time=20535.108 buffer_time=3.186 print_stall=0 extruder: target=210 temp=211.0 pwm=0.323
Stats 66500.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66738276 bytes_read=10126204 bytes_retransmit=9 bytes_invalid=0 send_seq=1264836 receive_seq=1264836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=16196 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125595 bytes_read=388744 bytes_retransmit=0 bytes_invalid=0 send_seq=20908 receive_seq=20908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000577 adj=49999522 sd_pos=4498814 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.12 cputime=6008.222 memavail=3263120 print_time=20535.108 buffer_time=2.185 print_stall=0 extruder: target=210 temp=210.6 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66501.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66751080 bytes_read=10127521 bytes_retransmit=9 bytes_invalid=0 send_seq=1265056 receive_seq=1265056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=19118 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125601 bytes_read=388759 bytes_retransmit=0 bytes_invalid=0 send_seq=20909 receive_seq=20909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000576 adj=49999518 sd_pos=4500854 heater_bed: target=60 temp=60.0 pwm=0.232 sysload=0.12 cputime=6008.390 memavail=3263120 print_time=20536.396 buffer_time=2.472 print_stall=0 extruder: target=210 temp=210.2 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66502.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66763779 bytes_read=10128832 bytes_retransmit=9 bytes_invalid=0 send_seq=1265275 receive_seq=1265275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=14110 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125607 bytes_read=388775 bytes_retransmit=0 bytes_invalid=0 send_seq=20910 receive_seq=20910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000574 adj=49999470 sd_pos=4502389 heater_bed: target=60 temp=60.0 pwm=0.247 sysload=0.12 cputime=6008.473 memavail=3263120 print_time=20537.175 buffer_time=2.251 print_stall=0 extruder: target=210 temp=209.7 pwm=0.452
Stats 66503.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66776415 bytes_read=10130120 bytes_retransmit=9 bytes_invalid=0 send_seq=1265489 receive_seq=1265489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=7535 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125613 bytes_read=388791 bytes_retransmit=0 bytes_invalid=0 send_seq=20911 receive_seq=20911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000572 adj=49999472 sd_pos=4505254 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.12 cputime=6008.553 memavail=3263120 print_time=20538.023 buffer_time=2.099 print_stall=0 extruder: target=210 temp=209.5 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66504.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66786044 bytes_read=10131142 bytes_retransmit=9 bytes_invalid=0 send_seq=1265650 receive_seq=1265650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3543 freq=400007716 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125619 bytes_read=388807 bytes_retransmit=0 bytes_invalid=0 send_seq=20912 receive_seq=20912 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000569 adj=49999405 sd_pos=4506190 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.11 cputime=6008.750 memavail=3261356 print_time=20539.091 buffer_time=2.166 print_stall=0 extruder: target=210 temp=209.4 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66505.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66793080 bytes_read=10131993 bytes_retransmit=9 bytes_invalid=0 send_seq=1265777 receive_seq=1265777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1347 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125625 bytes_read=388836 bytes_retransmit=0 bytes_invalid=0 send_seq=20913 receive_seq=20913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000570 adj=49999364 sd_pos=4506818 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.11 cputime=6008.918 memavail=3261356 print_time=20540.058 buffer_time=2.132 print_stall=0 extruder: target=210 temp=209.5 pwm=0.386
Stats 66506.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66798269 bytes_read=10132680 bytes_retransmit=9 bytes_invalid=0 send_seq=1265874 receive_seq=1265874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=2228 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125631 bytes_read=388852 bytes_retransmit=0 bytes_invalid=0 send_seq=20914 receive_seq=20914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000568 adj=49999440 sd_pos=4510410 heater_bed: target=60 temp=60.0 pwm=0.268 sysload=0.11 cputime=6009.032 memavail=3261116 print_time=20541.116 buffer_time=2.189 print_stall=0 extruder: target=210 temp=209.6 pwm=0.386
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66507.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66802650 bytes_read=10133326 bytes_retransmit=9 bytes_invalid=0 send_seq=1265957 receive_seq=1265957 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=2022 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125637 bytes_read=388868 bytes_retransmit=0 bytes_invalid=0 send_seq=20915 receive_seq=20915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000567 adj=49999449 sd_pos=4510851 heater_bed: target=60 temp=60.0 pwm=0.225 sysload=0.11 cputime=6009.228 memavail=3261116 print_time=20541.939 buffer_time=2.011 print_stall=0 extruder: target=210 temp=209.9 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66508.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66808863 bytes_read=10134109 bytes_retransmit=9 bytes_invalid=0 send_seq=1266071 receive_seq=1266071 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=4948 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125643 bytes_read=388884 bytes_retransmit=0 bytes_invalid=0 send_seq=20916 receive_seq=20916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000565 adj=49999463 sd_pos=4512025 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.11 cputime=6009.458 memavail=3265716 print_time=20543.519 buffer_time=2.591 print_stall=0 extruder: target=210 temp=210.0 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66509.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66813980 bytes_read=10134795 bytes_retransmit=9 bytes_invalid=0 send_seq=1266168 receive_seq=1266168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=14725 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125649 bytes_read=388900 bytes_retransmit=0 bytes_invalid=0 send_seq=20917 receive_seq=20917 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000562 adj=49999500 sd_pos=4514334 heater_bed: target=60 temp=60.0 pwm=0.032 sysload=0.10 cputime=6009.561 memavail=3263712 print_time=20544.856 buffer_time=2.927 print_stall=0 extruder: target=210 temp=210.0 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66510.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66818001 bytes_read=10135416 bytes_retransmit=9 bytes_invalid=0 send_seq=1266246 receive_seq=1266246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=26802 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125655 bytes_read=388929 bytes_retransmit=0 bytes_invalid=0 send_seq=20918 receive_seq=20918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000558 adj=49999499 sd_pos=4516840 heater_bed: target=60 temp=60.0 pwm=0.235 sysload=0.10 cputime=6009.665 memavail=3263716 print_time=20546.320 buffer_time=3.391 print_stall=0 extruder: target=210 temp=209.8 pwm=0.372
Stats 66511.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66829205 bytes_read=10136599 bytes_retransmit=9 bytes_invalid=0 send_seq=1266440 receive_seq=1266440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=16757 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125667 bytes_read=388961 bytes_retransmit=0 bytes_invalid=0 send_seq=20920 receive_seq=20920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000552 adj=49999511 sd_pos=4516840 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.10 cputime=6009.713 memavail=3263716 print_time=20546.320 buffer_time=2.390 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66512.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=66841219 bytes_read=10137851 bytes_retransmit=9 bytes_invalid=0 send_seq=1266650 receive_seq=1266650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=23329 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125673 bytes_read=388977 bytes_retransmit=0 bytes_invalid=0 send_seq=20921 receive_seq=20921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000549 adj=49999474 sd_pos=4519365 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.10 cputime=6009.883 memavail=3263716 print_time=20547.826 buffer_time=2.895 print_stall=0 extruder: target=210 temp=209.3 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66513.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66852994 bytes_read=10139073 bytes_retransmit=9 bytes_invalid=0 send_seq=1266845 receive_seq=1266845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=28970 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125679 bytes_read=388993 bytes_retransmit=0 bytes_invalid=0 send_seq=20922 receive_seq=20922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000548 adj=49999427 sd_pos=4521741 heater_bed: target=60 temp=60.0 pwm=0.011 sysload=0.10 cputime=6009.998 memavail=3263720 print_time=20549.304 buffer_time=3.372 print_stall=0 extruder: target=210 temp=209.0 pwm=0.436
Stats 66514.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66865413 bytes_read=10140310 bytes_retransmit=9 bytes_invalid=0 send_seq=1267052 receive_seq=1267052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=17754 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125685 bytes_read=389009 bytes_retransmit=0 bytes_invalid=0 send_seq=20923 receive_seq=20923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000545 adj=49999486 sd_pos=4521741 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.09 cputime=6010.048 memavail=3263720 print_time=20549.304 buffer_time=2.372 print_stall=0 extruder: target=210 temp=208.8 pwm=0.496
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66515.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66878078 bytes_read=10141607 bytes_retransmit=9 bytes_invalid=0 send_seq=1267271 receive_seq=1267271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=21608 freq=400007710 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125691 bytes_read=389038 bytes_retransmit=0 bytes_invalid=0 send_seq=20924 receive_seq=20924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000542 adj=49999459 sd_pos=4524092 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.09 cputime=6010.165 memavail=3268292 print_time=20550.738 buffer_time=2.805 print_stall=0 extruder: target=210 temp=208.9 pwm=0.442
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66516.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66890700 bytes_read=10142943 bytes_retransmit=9 bytes_invalid=0 send_seq=1267492 receive_seq=1267492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=22970 freq=400007688 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125697 bytes_read=389054 bytes_retransmit=0 bytes_invalid=0 send_seq=20925 receive_seq=20925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000540 adj=49999399 sd_pos=4526324 heater_bed: target=60 temp=60.0 pwm=0.132 sysload=0.09 cputime=6010.279 memavail=3271296 print_time=20551.978 buffer_time=3.045 print_stall=0 extruder: target=210 temp=209.1 pwm=0.442
Stats 66517.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=66902347 bytes_read=10144150 bytes_retransmit=9 bytes_invalid=0 send_seq=1267693 receive_seq=1267693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=12540 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125703 bytes_read=389070 bytes_retransmit=0 bytes_invalid=0 send_seq=20926 receive_seq=20926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000542 adj=49999444 sd_pos=4526324 heater_bed: target=60 temp=60.0 pwm=0.046 sysload=0.09 cputime=6010.347 memavail=3271156 print_time=20551.978 buffer_time=2.044 print_stall=0 extruder: target=210 temp=209.5 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66518.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66913889 bytes_read=10145378 bytes_retransmit=9 bytes_invalid=0 send_seq=1267895 receive_seq=1267895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=15927 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125709 bytes_read=389086 bytes_retransmit=0 bytes_invalid=0 send_seq=20927 receive_seq=20927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000541 adj=49999471 sd_pos=4528555 heater_bed: target=60 temp=60.0 pwm=0.079 sysload=0.09 cputime=6010.519 memavail=3271156 print_time=20553.298 buffer_time=2.363 print_stall=0 extruder: target=210 temp=209.9 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66519.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66925559 bytes_read=10146623 bytes_retransmit=9 bytes_invalid=0 send_seq=1268099 receive_seq=1268099 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=20053 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125715 bytes_read=389102 bytes_retransmit=0 bytes_invalid=0 send_seq=20928 receive_seq=20928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000539 adj=49999463 sd_pos=4530760 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=0.08 cputime=6010.640 memavail=3269424 print_time=20554.723 buffer_time=2.788 print_stall=0 extruder: target=210 temp=210.5 pwm=0.253
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66520.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66937183 bytes_read=10147840 bytes_retransmit=9 bytes_invalid=0 send_seq=1268302 receive_seq=1268302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=24563 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125721 bytes_read=389131 bytes_retransmit=0 bytes_invalid=0 send_seq=20929 receive_seq=20929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000542 adj=49999495 sd_pos=4532976 heater_bed: target=60 temp=60.0 pwm=0.270 sysload=0.08 cputime=6010.755 memavail=3269200 print_time=20556.141 buffer_time=3.205 print_stall=0 extruder: target=210 temp=210.9 pwm=0.253
Stats 66521.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66948351 bytes_read=10149017 bytes_retransmit=9 bytes_invalid=0 send_seq=1268497 receive_seq=1268497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=14503 freq=400007658 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125727 bytes_read=389147 bytes_retransmit=0 bytes_invalid=0 send_seq=20930 receive_seq=20930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000538 adj=49999548 sd_pos=4532976 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.08 cputime=6010.802 memavail=3269200 print_time=20556.141 buffer_time=2.204 print_stall=0 extruder: target=210 temp=211.2 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66522.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66959921 bytes_read=10150253 bytes_retransmit=9 bytes_invalid=0 send_seq=1268698 receive_seq=1268698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=21251 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125733 bytes_read=389163 bytes_retransmit=0 bytes_invalid=0 send_seq=20931 receive_seq=20931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000535 adj=49999526 sd_pos=4535399 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.08 cputime=6010.921 memavail=3269200 print_time=20557.647 buffer_time=2.710 print_stall=0 extruder: target=210 temp=211.4 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66523.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66971833 bytes_read=10151506 bytes_retransmit=9 bytes_invalid=0 send_seq=1268905 receive_seq=1268905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=27018 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125739 bytes_read=389179 bytes_retransmit=0 bytes_invalid=0 send_seq=20932 receive_seq=20932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000535 adj=49999507 sd_pos=4537946 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.08 cputime=6011.102 memavail=3268952 print_time=20559.157 buffer_time=3.219 print_stall=0 extruder: target=210 temp=211.3 pwm=0.263
Stats 66524.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66984448 bytes_read=10152803 bytes_retransmit=9 bytes_invalid=0 send_seq=1269124 receive_seq=1269124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=15656 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125745 bytes_read=389195 bytes_retransmit=0 bytes_invalid=0 send_seq=20933 receive_seq=20933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000533 adj=49999531 sd_pos=4537946 heater_bed: target=60 temp=60.0 pwm=0.058 sysload=0.08 cputime=6011.154 memavail=3268224 print_time=20559.157 buffer_time=2.219 print_stall=0 extruder: target=210 temp=211.1 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66525.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=66997187 bytes_read=10154139 bytes_retransmit=9 bytes_invalid=0 send_seq=1269345 receive_seq=1269345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=17828 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=125751 bytes_read=389224 bytes_retransmit=0 bytes_invalid=0 send_seq=20934 receive_seq=20934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000531 adj=49999518 sd_pos=4540216 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.08 cputime=6011.275 memavail=3268232 print_time=20560.490 buffer_time=2.551 print_stall=0 extruder: target=210 temp=210.8 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66526.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67009001 bytes_read=10155371 bytes_retransmit=9 bytes_invalid=0 send_seq=1269551 receive_seq=1269551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=20632 freq=400007653 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=125757 bytes_read=389240 bytes_retransmit=0 bytes_invalid=0 send_seq=20935 receive_seq=20935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000528 adj=49999513 sd_pos=4542389 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.08 cputime=6011.394 memavail=3268232 print_time=20561.777 buffer_time=2.838 print_stall=0 extruder: target=210 temp=210.5 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66527.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67020334 bytes_read=10156568 bytes_retransmit=9 bytes_invalid=0 send_seq=1269750 receive_seq=1269750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=20066 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=125763 bytes_read=389256 bytes_retransmit=0 bytes_invalid=0 send_seq=20936 receive_seq=20936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000526 adj=49999478 sd_pos=4543810 heater_bed: target=60 temp=60.0 pwm=0.016 sysload=0.08 cputime=6011.488 memavail=3267744 print_time=20562.661 buffer_time=2.721 print_stall=0 extruder: target=210 temp=210.2 pwm=0.373
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66528.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67031866 bytes_read=10157820 bytes_retransmit=9 bytes_invalid=0 send_seq=1269951 receive_seq=1269951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=16330 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=125769 bytes_read=389272 bytes_retransmit=0 bytes_invalid=0 send_seq=20937 receive_seq=20937 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000525 adj=49999471 sd_pos=4545478 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.08 cputime=6011.579 memavail=3267744 print_time=20563.403 buffer_time=2.462 print_stall=0 extruder: target=210 temp=209.7 pwm=0.428
Stats 66529.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67043732 bytes_read=10159050 bytes_retransmit=9 bytes_invalid=0 send_seq=1270157 receive_seq=1270157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=9108 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=125775 bytes_read=389288 bytes_retransmit=0 bytes_invalid=0 send_seq=20938 receive_seq=20938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000529 adj=49999474 sd_pos=4547343 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.23 cputime=6011.709 memavail=3270224 print_time=20564.027 buffer_time=2.086 print_stall=0 extruder: target=210 temp=209.5 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66530.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67054130 bytes_read=10160104 bytes_retransmit=9 bytes_invalid=0 send_seq=1270328 receive_seq=1270328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=4782 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125781 bytes_read=389317 bytes_retransmit=0 bytes_invalid=0 send_seq=20939 receive_seq=20939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000528 adj=49999514 sd_pos=4549181 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.23 cputime=6011.964 memavail=3269220 print_time=20565.049 buffer_time=2.107 print_stall=0 extruder: target=210 temp=209.6 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66531.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67062091 bytes_read=10161040 bytes_retransmit=9 bytes_invalid=0 send_seq=1270469 receive_seq=1270469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=2790 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125787 bytes_read=389333 bytes_retransmit=0 bytes_invalid=0 send_seq=20940 receive_seq=20940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000528 adj=49999497 sd_pos=4549556 heater_bed: target=60 temp=60.0 pwm=0.059 sysload=0.23 cputime=6012.179 memavail=3268212 print_time=20566.358 buffer_time=2.415 print_stall=0 extruder: target=210 temp=209.5 pwm=0.428
Stats 66532.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67067988 bytes_read=10161787 bytes_retransmit=9 bytes_invalid=0 send_seq=1270578 receive_seq=1270578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2067 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125793 bytes_read=389349 bytes_retransmit=0 bytes_invalid=0 send_seq=20941 receive_seq=20941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000527 adj=49999511 sd_pos=4552318 heater_bed: target=60 temp=60.0 pwm=0.056 sysload=0.23 cputime=6012.249 memavail=3268212 print_time=20567.129 buffer_time=2.186 print_stall=0 extruder: target=210 temp=209.7 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66533.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67071769 bytes_read=10162380 bytes_retransmit=9 bytes_invalid=0 send_seq=1270653 receive_seq=1270653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=2852 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125799 bytes_read=389365 bytes_retransmit=0 bytes_invalid=0 send_seq=20942 receive_seq=20942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000529 adj=49999502 sd_pos=4553871 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.23 cputime=6012.371 memavail=3268212 print_time=20567.953 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.9 pwm=0.369
Stats 66534.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67078155 bytes_read=10163196 bytes_retransmit=9 bytes_invalid=0 send_seq=1270770 receive_seq=1270770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=189 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125805 bytes_read=389381 bytes_retransmit=0 bytes_invalid=0 send_seq=20943 receive_seq=20943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000525 adj=49999460 sd_pos=4553871 heater_bed: target=60 temp=60.0 pwm=0.047 sysload=0.21 cputime=6012.582 memavail=3268216 print_time=20568.954 buffer_time=2.009 print_stall=0 extruder: target=210 temp=210.1 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66535.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67083968 bytes_read=10163933 bytes_retransmit=9 bytes_invalid=0 send_seq=1270877 receive_seq=1270877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=14665 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125811 bytes_read=389410 bytes_retransmit=0 bytes_invalid=0 send_seq=20944 receive_seq=20944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000526 adj=49999438 sd_pos=4557223 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.21 cputime=6012.770 memavail=3268220 print_time=20571.140 buffer_time=3.195 print_stall=0 extruder: target=210 temp=210.1 pwm=0.313
Stats 66536.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67087707 bytes_read=10164500 bytes_retransmit=9 bytes_invalid=0 send_seq=1270950 receive_seq=1270950 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=11459 freq=400007705 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125817 bytes_read=389426 bytes_retransmit=0 bytes_invalid=0 send_seq=20945 receive_seq=20945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000528 adj=49999523 sd_pos=4557223 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.21 cputime=6012.834 memavail=3267716 print_time=20571.140 buffer_time=2.194 print_stall=0 extruder: target=210 temp=210.0 pwm=0.313
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66537.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67096746 bytes_read=10165526 bytes_retransmit=9 bytes_invalid=0 send_seq=1271109 receive_seq=1271109 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=19592 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125823 bytes_read=389442 bytes_retransmit=0 bytes_invalid=0 send_seq=20946 receive_seq=20946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000525 adj=49999536 sd_pos=4559807 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.21 cputime=6013.011 memavail=3267716 print_time=20572.703 buffer_time=2.756 print_stall=0 extruder: target=210 temp=209.7 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66538.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67108034 bytes_read=10166729 bytes_retransmit=9 bytes_invalid=0 send_seq=1271306 receive_seq=1271306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=25822 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125829 bytes_read=389458 bytes_retransmit=0 bytes_invalid=0 send_seq=20947 receive_seq=20947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000522 adj=49999528 sd_pos=4562342 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.21 cputime=6013.125 memavail=3271972 print_time=20574.282 buffer_time=3.334 print_stall=0 extruder: target=210 temp=209.4 pwm=0.449
Stats 66539.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67119566 bytes_read=10167951 bytes_retransmit=9 bytes_invalid=0 send_seq=1271507 receive_seq=1271507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=15436 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125835 bytes_read=389474 bytes_retransmit=0 bytes_invalid=0 send_seq=20948 receive_seq=20948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000518 adj=49999531 sd_pos=4562342 heater_bed: target=60 temp=60.0 pwm=0.176 sysload=0.36 cputime=6013.175 memavail=3270460 print_time=20574.282 buffer_time=2.333 print_stall=0 extruder: target=210 temp=209.2 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66540.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67131094 bytes_read=10169173 bytes_retransmit=9 bytes_invalid=0 send_seq=1271709 receive_seq=1271709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=20103 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125841 bytes_read=389503 bytes_retransmit=0 bytes_invalid=0 send_seq=20949 receive_seq=20949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000515 adj=49999506 sd_pos=4564756 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.36 cputime=6013.293 memavail=3270216 print_time=20575.805 buffer_time=2.854 print_stall=0 extruder: target=210 temp=209.0 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66541.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67142688 bytes_read=10170385 bytes_retransmit=9 bytes_invalid=0 send_seq=1271911 receive_seq=1271911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=22919 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125847 bytes_read=389519 bytes_retransmit=0 bytes_invalid=0 send_seq=20950 receive_seq=20950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000512 adj=49999478 sd_pos=4566926 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.36 cputime=6013.400 memavail=3270216 print_time=20577.147 buffer_time=3.196 print_stall=0 extruder: target=210 temp=208.9 pwm=0.449
Stats 66542.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67153584 bytes_read=10171557 bytes_retransmit=9 bytes_invalid=0 send_seq=1272102 receive_seq=1272102 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=13135 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125853 bytes_read=389535 bytes_retransmit=0 bytes_invalid=0 send_seq=20951 receive_seq=20951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000513 adj=49999492 sd_pos=4566926 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.36 cputime=6013.480 memavail=3269712 print_time=20577.147 buffer_time=2.195 print_stall=0 extruder: target=210 temp=209.1 pwm=0.449
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66543.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67164761 bytes_read=10172764 bytes_retransmit=9 bytes_invalid=0 send_seq=1272297 receive_seq=1272297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=17597 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125859 bytes_read=389551 bytes_retransmit=0 bytes_invalid=0 send_seq=20952 receive_seq=20952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000511 adj=49999487 sd_pos=4569390 heater_bed: target=60 temp=60.0 pwm=0.169 sysload=0.36 cputime=6013.655 memavail=3269712 print_time=20578.570 buffer_time=2.617 print_stall=0 extruder: target=210 temp=209.4 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66544.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67175664 bytes_read=10173926 bytes_retransmit=9 bytes_invalid=0 send_seq=1272489 receive_seq=1272489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=22445 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125865 bytes_read=389567 bytes_retransmit=0 bytes_invalid=0 send_seq=20953 receive_seq=20953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000508 adj=49999490 sd_pos=4571898 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.65 cputime=6013.770 memavail=3269712 print_time=20580.027 buffer_time=3.073 print_stall=0 extruder: target=210 temp=209.7 pwm=0.333
Stats 66545.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67187083 bytes_read=10175148 bytes_retransmit=9 bytes_invalid=0 send_seq=1272690 receive_seq=1272690 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=12179 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125871 bytes_read=389596 bytes_retransmit=0 bytes_invalid=0 send_seq=20954 receive_seq=20954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000505 adj=49999486 sd_pos=4571898 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.65 cputime=6013.821 memavail=3269712 print_time=20580.027 buffer_time=2.072 print_stall=0 extruder: target=210 temp=210.2 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66546.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67198160 bytes_read=10176334 bytes_retransmit=9 bytes_invalid=0 send_seq=1272884 receive_seq=1272884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=17279 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125877 bytes_read=389612 bytes_retransmit=0 bytes_invalid=0 send_seq=20955 receive_seq=20955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000503 adj=49999468 sd_pos=4574642 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.65 cputime=6013.934 memavail=3269224 print_time=20581.520 buffer_time=2.565 print_stall=0 extruder: target=210 temp=210.7 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66547.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67209559 bytes_read=10177536 bytes_retransmit=9 bytes_invalid=0 send_seq=1273084 receive_seq=1273084 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=22349 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125883 bytes_read=389628 bytes_retransmit=0 bytes_invalid=0 send_seq=20956 receive_seq=20956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000501 adj=49999419 sd_pos=4577183 heater_bed: target=60 temp=60.0 pwm=0.125 sysload=0.65 cputime=6014.044 memavail=3269224 print_time=20583.027 buffer_time=3.071 print_stall=0 extruder: target=210 temp=211.1 pwm=0.222
Stats 66548.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67220624 bytes_read=10178729 bytes_retransmit=9 bytes_invalid=0 send_seq=1273276 receive_seq=1273276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12419 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125889 bytes_read=389644 bytes_retransmit=0 bytes_invalid=0 send_seq=20957 receive_seq=20957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000501 adj=49999466 sd_pos=4577183 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.65 cputime=6014.120 memavail=3269224 print_time=20583.027 buffer_time=2.070 print_stall=0 extruder: target=210 temp=211.3 pwm=0.222
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66549.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67232201 bytes_read=10179930 bytes_retransmit=9 bytes_invalid=0 send_seq=1273473 receive_seq=1273473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=17233 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=125895 bytes_read=389660 bytes_retransmit=0 bytes_invalid=0 send_seq=20958 receive_seq=20958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000498 adj=49999481 sd_pos=4579732 heater_bed: target=60 temp=60.0 pwm=0.159 sysload=0.60 cputime=6014.283 memavail=3268468 print_time=20584.512 buffer_time=2.554 print_stall=0 extruder: target=210 temp=211.5 pwm=0.222
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66550.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67243361 bytes_read=10181117 bytes_retransmit=9 bytes_invalid=0 send_seq=1273670 receive_seq=1273670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=22458 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125901 bytes_read=389689 bytes_retransmit=0 bytes_invalid=0 send_seq=20959 receive_seq=20959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000495 adj=49999462 sd_pos=4582208 heater_bed: target=60 temp=60.0 pwm=0.027 sysload=0.60 cputime=6014.394 memavail=3268480 print_time=20586.026 buffer_time=3.068 print_stall=0 extruder: target=210 temp=211.4 pwm=0.222
Stats 66551.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67254628 bytes_read=10182315 bytes_retransmit=9 bytes_invalid=0 send_seq=1273867 receive_seq=1273867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=12339 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125907 bytes_read=389705 bytes_retransmit=0 bytes_invalid=0 send_seq=20960 receive_seq=20960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000493 adj=49999485 sd_pos=4582208 heater_bed: target=60 temp=60.0 pwm=0.187 sysload=0.60 cputime=6014.442 memavail=3268480 print_time=20586.026 buffer_time=2.067 print_stall=0 extruder: target=210 temp=211.3 pwm=0.273
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66552.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67266122 bytes_read=10183531 bytes_retransmit=9 bytes_invalid=0 send_seq=1274067 receive_seq=1274067 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=16154 freq=400007642 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125913 bytes_read=389721 bytes_retransmit=0 bytes_invalid=0 send_seq=20961 receive_seq=20961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000500 adj=49999455 sd_pos=4584849 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.60 cputime=6014.554 memavail=3268480 print_time=20587.430 buffer_time=2.471 print_stall=0 extruder: target=210 temp=210.7 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66553.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67277255 bytes_read=10184719 bytes_retransmit=9 bytes_invalid=0 send_seq=1274261 receive_seq=1274261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=21435 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125919 bytes_read=389737 bytes_retransmit=0 bytes_invalid=0 send_seq=20962 receive_seq=20962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000497 adj=49999497 sd_pos=4587448 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.60 cputime=6014.662 memavail=3268480 print_time=20588.890 buffer_time=2.930 print_stall=0 extruder: target=210 temp=210.5 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66554.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67288875 bytes_read=10185951 bytes_retransmit=9 bytes_invalid=0 send_seq=1274464 receive_seq=1274464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=26161 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125925 bytes_read=389753 bytes_retransmit=0 bytes_invalid=0 send_seq=20963 receive_seq=20963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000500 adj=49999483 sd_pos=4590009 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.55 cputime=6014.841 memavail=3268480 print_time=20590.402 buffer_time=3.411 print_stall=0 extruder: target=210 temp=210.1 pwm=0.409
Stats 66555.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67300494 bytes_read=10187137 bytes_retransmit=9 bytes_invalid=0 send_seq=1274658 receive_seq=1274658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=15649 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=125931 bytes_read=389769 bytes_retransmit=0 bytes_invalid=0 send_seq=20964 receive_seq=20964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000497 adj=49999523 sd_pos=4590009 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.55 cputime=6014.890 memavail=3268480 print_time=20590.402 buffer_time=2.411 print_stall=0 extruder: target=210 temp=209.6 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66556.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67311931 bytes_read=10188324 bytes_retransmit=9 bytes_invalid=0 send_seq=1274856 receive_seq=1274855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=19990 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125937 bytes_read=389798 bytes_retransmit=0 bytes_invalid=0 send_seq=20965 receive_seq=20965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000493 adj=49999504 sd_pos=4592337 heater_bed: target=60 temp=60.0 pwm=0.085 sysload=0.55 cputime=6015.004 memavail=3268480 print_time=20591.888 buffer_time=2.897 print_stall=0 extruder: target=210 temp=209.5 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66557.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67322988 bytes_read=10189486 bytes_retransmit=9 bytes_invalid=0 send_seq=1275044 receive_seq=1275044 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=19504 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125943 bytes_read=389814 bytes_retransmit=0 bytes_invalid=0 send_seq=20966 receive_seq=20966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000490 adj=49999448 sd_pos=4594004 heater_bed: target=60 temp=60.0 pwm=0.245 sysload=0.55 cputime=6015.094 memavail=3268480 print_time=20592.861 buffer_time=2.869 print_stall=0 extruder: target=210 temp=209.4 pwm=0.409
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66558.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67333976 bytes_read=10190668 bytes_retransmit=9 bytes_invalid=0 send_seq=1275234 receive_seq=1275234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=13970 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125949 bytes_read=389830 bytes_retransmit=0 bytes_invalid=0 send_seq=20967 receive_seq=20967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000487 adj=49999429 sd_pos=4595289 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.55 cputime=6015.163 memavail=3268480 print_time=20593.361 buffer_time=2.369 print_stall=0 extruder: target=210 temp=209.4 pwm=0.411
Stats 66559.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67344843 bytes_read=10191805 bytes_retransmit=9 bytes_invalid=0 send_seq=1275421 receive_seq=1275421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=9228 freq=400007655 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125955 bytes_read=389846 bytes_retransmit=0 bytes_invalid=0 send_seq=20968 receive_seq=20968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000483 adj=49999409 sd_pos=4598132 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.50 cputime=6015.254 memavail=3266756 print_time=20594.219 buffer_time=2.226 print_stall=0 extruder: target=210 temp=209.6 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66560.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67354975 bytes_read=10192897 bytes_retransmit=9 bytes_invalid=0 send_seq=1275596 receive_seq=1275596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=4143 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=125961 bytes_read=389862 bytes_retransmit=0 bytes_invalid=0 send_seq=20969 receive_seq=20969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000481 adj=49999359 sd_pos=4599060 heater_bed: target=60 temp=60.0 pwm=0.121 sysload=0.50 cputime=6015.419 memavail=3266504 print_time=20595.043 buffer_time=2.049 print_stall=0 extruder: target=210 temp=209.7 pwm=0.351
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66561.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67362513 bytes_read=10193782 bytes_retransmit=9 bytes_invalid=0 send_seq=1275730 receive_seq=1275730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=1493 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125967 bytes_read=389891 bytes_retransmit=0 bytes_invalid=0 send_seq=20970 receive_seq=20970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000478 adj=49999351 sd_pos=4599363 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.50 cputime=6015.638 memavail=3265496 print_time=20596.162 buffer_time=2.168 print_stall=0 extruder: target=210 temp=210.0 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66562.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67368181 bytes_read=10194494 bytes_retransmit=9 bytes_invalid=0 send_seq=1275833 receive_seq=1275833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=2047 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125973 bytes_read=389907 bytes_retransmit=0 bytes_invalid=0 send_seq=20971 receive_seq=20971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000477 adj=49999346 sd_pos=4602199 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.50 cputime=6015.711 memavail=3265496 print_time=20597.070 buffer_time=2.076 print_stall=0 extruder: target=210 temp=210.3 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66563.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67372089 bytes_read=10195102 bytes_retransmit=9 bytes_invalid=0 send_seq=1275908 receive_seq=1275908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=3617 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125979 bytes_read=389923 bytes_retransmit=0 bytes_invalid=0 send_seq=20972 receive_seq=20972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000473 adj=49999378 sd_pos=4603876 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.50 cputime=6015.876 memavail=3265260 print_time=20598.145 buffer_time=2.150 print_stall=0 extruder: target=210 temp=210.4 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66564.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67378977 bytes_read=10195938 bytes_retransmit=9 bytes_invalid=0 send_seq=1276032 receive_seq=1276032 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1261 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125985 bytes_read=389939 bytes_retransmit=0 bytes_invalid=0 send_seq=20973 receive_seq=20973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000472 adj=49999342 sd_pos=4604102 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.46 cputime=6016.096 memavail=3265260 print_time=20599.325 buffer_time=2.329 print_stall=0 extruder: target=210 temp=210.4 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66565.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67384684 bytes_read=10196655 bytes_retransmit=9 bytes_invalid=0 send_seq=1276135 receive_seq=1276135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=9554 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=125991 bytes_read=389955 bytes_retransmit=0 bytes_invalid=0 send_seq=20974 receive_seq=20974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000471 adj=49999404 sd_pos=4606219 heater_bed: target=60 temp=60.0 pwm=0.163 sysload=0.46 cputime=6016.269 memavail=3265260 print_time=20600.669 buffer_time=2.673 print_stall=0 extruder: target=210 temp=210.2 pwm=0.350
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66566.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67388388 bytes_read=10197227 bytes_retransmit=9 bytes_invalid=0 send_seq=1276206 receive_seq=1276206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=18767 freq=400007652 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=125997 bytes_read=389984 bytes_retransmit=0 bytes_invalid=0 send_seq=20975 receive_seq=20975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000467 adj=49999441 sd_pos=4608283 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.46 cputime=6016.376 memavail=3264256 print_time=20601.905 buffer_time=2.909 print_stall=0 extruder: target=210 temp=209.9 pwm=0.414
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66567.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67397349 bytes_read=10198228 bytes_retransmit=9 bytes_invalid=0 send_seq=1276363 receive_seq=1276363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=21977 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126003 bytes_read=390000 bytes_retransmit=0 bytes_invalid=0 send_seq=20976 receive_seq=20976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000463 adj=49999390 sd_pos=4610125 heater_bed: target=60 temp=60.0 pwm=0.326 sysload=0.46 cputime=6016.482 memavail=3264256 print_time=20603.061 buffer_time=3.063 print_stall=0 extruder: target=210 temp=209.4 pwm=0.471
Stats 66568.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67408741 bytes_read=10199446 bytes_retransmit=9 bytes_invalid=0 send_seq=1276563 receive_seq=1276563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=11735 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126009 bytes_read=390016 bytes_retransmit=0 bytes_invalid=0 send_seq=20977 receive_seq=20977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000460 adj=49999382 sd_pos=4610125 heater_bed: target=60 temp=60.0 pwm=0.021 sysload=0.46 cputime=6016.532 memavail=3264256 print_time=20603.061 buffer_time=2.062 print_stall=0 extruder: target=210 temp=209.1 pwm=0.471
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66569.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67420009 bytes_read=10200653 bytes_retransmit=9 bytes_invalid=0 send_seq=1276761 receive_seq=1276761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=13257 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126015 bytes_read=390032 bytes_retransmit=0 bytes_invalid=0 send_seq=20978 receive_seq=20978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000457 adj=49999366 sd_pos=4612150 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.43 cputime=6016.653 memavail=3263752 print_time=20604.249 buffer_time=2.249 print_stall=0 extruder: target=210 temp=208.7 pwm=0.471
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66570.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67430732 bytes_read=10201809 bytes_retransmit=9 bytes_invalid=0 send_seq=1276949 receive_seq=1276949 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=17611 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126021 bytes_read=390048 bytes_retransmit=0 bytes_invalid=0 send_seq=20979 receive_seq=20979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000453 adj=49999335 sd_pos=4614331 heater_bed: target=60 temp=60.0 pwm=0.062 sysload=0.43 cputime=6016.796 memavail=3263756 print_time=20605.654 buffer_time=2.653 print_stall=0 extruder: target=210 temp=208.5 pwm=0.526
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66571.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67441544 bytes_read=10202961 bytes_retransmit=9 bytes_invalid=0 send_seq=1277139 receive_seq=1277139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=23650 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126027 bytes_read=390077 bytes_retransmit=0 bytes_invalid=0 send_seq=20980 receive_seq=20980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000455 adj=49999344 sd_pos=4616551 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.43 cputime=6017.000 memavail=3263756 print_time=20607.122 buffer_time=3.121 print_stall=0 extruder: target=210 temp=208.6 pwm=0.450
Stats 66572.6: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67452542 bytes_read=10204095 bytes_retransmit=9 bytes_invalid=0 send_seq=1277323 receive_seq=1277323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=13719 freq=400007647 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126033 bytes_read=390093 bytes_retransmit=0 bytes_invalid=0 send_seq=20981 receive_seq=20981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000454 adj=49999403 sd_pos=4616551 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.43 cputime=6017.048 memavail=3263756 print_time=20607.122 buffer_time=2.121 print_stall=0 extruder: target=210 temp=208.9 pwm=0.450
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66573.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67464032 bytes_read=10205324 bytes_retransmit=9 bytes_invalid=0 send_seq=1277523 receive_seq=1277523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=18548 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126039 bytes_read=390109 bytes_retransmit=0 bytes_invalid=0 send_seq=20982 receive_seq=20982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000452 adj=49999387 sd_pos=4618881 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.43 cputime=6017.174 memavail=3263756 print_time=20608.552 buffer_time=2.549 print_stall=0 extruder: target=210 temp=209.5 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66574.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67476069 bytes_read=10206571 bytes_retransmit=9 bytes_invalid=0 send_seq=1277732 receive_seq=1277732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=21687 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126045 bytes_read=390125 bytes_retransmit=0 bytes_invalid=0 send_seq=20983 receive_seq=20983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000449 adj=49999359 sd_pos=4621330 heater_bed: target=60 temp=60.0 pwm=0.156 sysload=0.47 cputime=6017.304 memavail=3263756 print_time=20609.904 buffer_time=2.901 print_stall=0 extruder: target=210 temp=209.9 pwm=0.318
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66575.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67487829 bytes_read=10207808 bytes_retransmit=9 bytes_invalid=0 send_seq=1277936 receive_seq=1277936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=23076 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126051 bytes_read=390141 bytes_retransmit=0 bytes_invalid=0 send_seq=20984 receive_seq=20984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000448 adj=49999377 sd_pos=4623065 heater_bed: target=60 temp=60.0 pwm=0.036 sysload=0.47 cputime=6017.429 memavail=3264496 print_time=20611.108 buffer_time=3.104 print_stall=0 extruder: target=210 temp=210.5 pwm=0.240
Stats 66576.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67499585 bytes_read=10209049 bytes_retransmit=9 bytes_invalid=0 send_seq=1278141 receive_seq=1278141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=12514 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=126057 bytes_read=390170 bytes_retransmit=0 bytes_invalid=0 send_seq=20985 receive_seq=20985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000447 adj=49999405 sd_pos=4623065 heater_bed: target=60 temp=60.0 pwm=0.267 sysload=0.47 cputime=6017.492 memavail=3264512 print_time=20611.108 buffer_time=2.103 print_stall=0 extruder: target=210 temp=211.1 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66577.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67511072 bytes_read=10210211 bytes_retransmit=9 bytes_invalid=0 send_seq=1278333 receive_seq=1278333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=14870 freq=400007648 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=126063 bytes_read=390186 bytes_retransmit=0 bytes_invalid=0 send_seq=20986 receive_seq=20986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000446 adj=49999400 sd_pos=4624950 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.47 cputime=6017.663 memavail=3264512 print_time=20612.358 buffer_time=2.353 print_stall=0 extruder: target=210 temp=211.4 pwm=0.186
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66578.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67521812 bytes_read=10211389 bytes_retransmit=9 bytes_invalid=0 send_seq=1278522 receive_seq=1278522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=17454 freq=400007634 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=126069 bytes_read=390202 bytes_retransmit=0 bytes_invalid=0 send_seq=20987 receive_seq=20987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000443 adj=49999371 sd_pos=4626786 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.47 cputime=6017.787 memavail=3264512 print_time=20613.554 buffer_time=2.548 print_stall=0 extruder: target=210 temp=211.6 pwm=0.186
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66579.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67533292 bytes_read=10212610 bytes_retransmit=9 bytes_invalid=0 send_seq=1278723 receive_seq=1278723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=21187 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=126075 bytes_read=390218 bytes_retransmit=0 bytes_invalid=0 send_seq=20988 receive_seq=20988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000441 adj=49999383 sd_pos=4628910 heater_bed: target=60 temp=60.0 pwm=0.151 sysload=0.52 cputime=6017.909 memavail=3268816 print_time=20614.925 buffer_time=2.918 print_stall=0 extruder: target=210 temp=211.5 pwm=0.248
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66580.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67544577 bytes_read=10213823 bytes_retransmit=9 bytes_invalid=0 send_seq=1278923 receive_seq=1278923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=26563 freq=400007641 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=126087 bytes_read=390250 bytes_retransmit=0 bytes_invalid=0 send_seq=20990 receive_seq=20990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000448 adj=49999401 sd_pos=4631314 heater_bed: target=60 temp=60.0 pwm=0.092 sysload=0.52 cputime=6018.029 memavail=3268876 print_time=20616.355 buffer_time=3.348 print_stall=0 extruder: target=210 temp=211.3 pwm=0.248
Stats 66581.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67555857 bytes_read=10215000 bytes_retransmit=9 bytes_invalid=0 send_seq=1279115 receive_seq=1279115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=16402 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126093 bytes_read=390278 bytes_retransmit=0 bytes_invalid=0 send_seq=20991 receive_seq=20991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000444 adj=49999473 sd_pos=4631314 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.52 cputime=6018.080 memavail=3268624 print_time=20616.355 buffer_time=2.347 print_stall=0 extruder: target=210 temp=211.1 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66582.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67567532 bytes_read=10216236 bytes_retransmit=9 bytes_invalid=0 send_seq=1279319 receive_seq=1279319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=19863 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126099 bytes_read=390293 bytes_retransmit=0 bytes_invalid=0 send_seq=20992 receive_seq=20992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000440 adj=49999438 sd_pos=4633405 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.52 cputime=6018.262 memavail=3268624 print_time=20617.700 buffer_time=2.692 print_stall=0 extruder: target=210 temp=210.5 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66583.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67579341 bytes_read=10217429 bytes_retransmit=9 bytes_invalid=0 send_seq=1279515 receive_seq=1279515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=15226 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126105 bytes_read=390308 bytes_retransmit=0 bytes_invalid=0 send_seq=20993 receive_seq=20993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000436 adj=49999406 sd_pos=4634383 heater_bed: target=60 temp=60.0 pwm=0.068 sysload=0.52 cputime=6018.341 memavail=3268624 print_time=20618.367 buffer_time=2.358 print_stall=0 extruder: target=210 temp=210.1 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66584.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67591213 bytes_read=10218680 bytes_retransmit=9 bytes_invalid=0 send_seq=1279722 receive_seq=1279722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=10522 freq=400007611 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126111 bytes_read=390323 bytes_retransmit=0 bytes_invalid=0 send_seq=20994 receive_seq=20994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000434 adj=49999379 sd_pos=4635464 heater_bed: target=60 temp=60.0 pwm=0.003 sysload=0.47 cputime=6018.423 memavail=3268624 print_time=20619.103 buffer_time=2.093 print_stall=0 extruder: target=210 temp=209.8 pwm=0.436
Stats 66585.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67601887 bytes_read=10219831 bytes_retransmit=9 bytes_invalid=0 send_seq=1279909 receive_seq=1279909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=6848 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126117 bytes_read=390338 bytes_retransmit=0 bytes_invalid=0 send_seq=20995 receive_seq=20995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000436 adj=49999382 sd_pos=4639260 heater_bed: target=60 temp=60.0 pwm=0.190 sysload=0.47 cputime=6018.511 memavail=3268120 print_time=20620.141 buffer_time=2.131 print_stall=0 extruder: target=210 temp=209.5 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66586.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67611152 bytes_read=10220838 bytes_retransmit=9 bytes_invalid=0 send_seq=1280070 receive_seq=1280070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=3534 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126123 bytes_read=390366 bytes_retransmit=0 bytes_invalid=0 send_seq=20996 receive_seq=20996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000434 adj=49999431 sd_pos=4639540 heater_bed: target=60 temp=60.0 pwm=0.250 sysload=0.47 cputime=6018.741 memavail=3267112 print_time=20621.250 buffer_time=2.206 print_stall=0 extruder: target=210 temp=209.4 pwm=0.436
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66587.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67617913 bytes_read=10221669 bytes_retransmit=9 bytes_invalid=0 send_seq=1280190 receive_seq=1280190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2824 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126129 bytes_read=390382 bytes_retransmit=0 bytes_invalid=0 send_seq=20997 receive_seq=20997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000431 adj=49999428 sd_pos=4640753 heater_bed: target=60 temp=60.0 pwm=0.006 sysload=0.47 cputime=6018.930 memavail=3270804 print_time=20622.331 buffer_time=2.286 print_stall=0 extruder: target=210 temp=209.4 pwm=0.381
Stats 66588.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67623105 bytes_read=10222372 bytes_retransmit=9 bytes_invalid=0 send_seq=1280287 receive_seq=1280287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1766 freq=400007604 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126135 bytes_read=390398 bytes_retransmit=0 bytes_invalid=0 send_seq=20998 receive_seq=20998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000429 adj=49999407 sd_pos=4643474 heater_bed: target=60 temp=60.0 pwm=0.081 sysload=0.47 cputime=6018.994 memavail=3270564 print_time=20623.054 buffer_time=2.009 print_stall=0 extruder: target=210 temp=209.6 pwm=0.381
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66589.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67627781 bytes_read=10222969 bytes_retransmit=9 bytes_invalid=0 send_seq=1280366 receive_seq=1280366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=34 upcoming_bytes=2476 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126141 bytes_read=390414 bytes_retransmit=0 bytes_invalid=0 send_seq=20999 receive_seq=20999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000426 adj=49999366 sd_pos=4644219 heater_bed: target=60 temp=60.0 pwm=0.286 sysload=0.44 cputime=6019.185 memavail=3268576 print_time=20624.162 buffer_time=2.116 print_stall=0 extruder: target=210 temp=209.7 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66590.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67634093 bytes_read=10223775 bytes_retransmit=9 bytes_invalid=0 send_seq=1280481 receive_seq=1280481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=271 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126147 bytes_read=390430 bytes_retransmit=0 bytes_invalid=0 send_seq=21000 receive_seq=21000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000423 adj=49999351 sd_pos=4644690 heater_bed: target=60 temp=60.0 pwm=0.044 sysload=0.44 cputime=6019.364 memavail=3268104 print_time=20625.140 buffer_time=2.093 print_stall=0 extruder: target=210 temp=209.8 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66591.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67639404 bytes_read=10224467 bytes_retransmit=9 bytes_invalid=0 send_seq=1280579 receive_seq=1280579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=9343 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126153 bytes_read=390459 bytes_retransmit=0 bytes_invalid=0 send_seq=21001 receive_seq=21001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000420 adj=49999300 sd_pos=4646986 heater_bed: target=60 temp=60.0 pwm=0.223 sysload=0.44 cputime=6019.468 memavail=3267852 print_time=20626.499 buffer_time=2.452 print_stall=0 extruder: target=210 temp=209.8 pwm=0.324
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66592.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67643371 bytes_read=10225029 bytes_retransmit=9 bytes_invalid=0 send_seq=1280648 receive_seq=1280648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=21080 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126159 bytes_read=390475 bytes_retransmit=0 bytes_invalid=0 send_seq=21002 receive_seq=21002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000428 adj=49999340 sd_pos=4649602 heater_bed: target=60 temp=60.0 pwm=0.180 sysload=0.44 cputime=6019.584 memavail=3267852 print_time=20627.987 buffer_time=2.939 print_stall=0 extruder: target=210 temp=209.7 pwm=0.385
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66593.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=67655252 bytes_read=10226291 bytes_retransmit=9 bytes_invalid=0 send_seq=1280854 receive_seq=1280854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=25853 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126165 bytes_read=390491 bytes_retransmit=0 bytes_invalid=0 send_seq=21003 receive_seq=21003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000430 adj=49999457 sd_pos=4652157 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.44 cputime=6019.798 memavail=3267852 print_time=20629.447 buffer_time=3.342 print_stall=0 extruder: target=210 temp=209.4 pwm=0.453
Stats 66594.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=67666533 bytes_read=10227468 bytes_retransmit=9 bytes_invalid=0 send_seq=1281050 receive_seq=1281050 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=15720 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126171 bytes_read=390507 bytes_retransmit=0 bytes_invalid=0 send_seq=21004 receive_seq=21004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000428 adj=49999485 sd_pos=4652157 heater_bed: target=60 temp=60.0 pwm=0.296 sysload=0.40 cputime=6019.845 memavail=3267852 print_time=20629.447 buffer_time=2.341 print_stall=0 extruder: target=210 temp=209.2 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66595.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=67677981 bytes_read=10228675 bytes_retransmit=9 bytes_invalid=0 send_seq=1281248 receive_seq=1281248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=19356 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126177 bytes_read=390523 bytes_retransmit=0 bytes_invalid=0 send_seq=21005 receive_seq=21005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000424 adj=49999479 sd_pos=4654642 heater_bed: target=60 temp=60.0 pwm=0.004 sysload=0.40 cputime=6019.961 memavail=3272640 print_time=20630.851 buffer_time=2.744 print_stall=0 extruder: target=210 temp=208.9 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66596.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=67689996 bytes_read=10229931 bytes_retransmit=9 bytes_invalid=0 send_seq=1281456 receive_seq=1281456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=22513 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126183 bytes_read=390552 bytes_retransmit=0 bytes_invalid=0 send_seq=21006 receive_seq=21006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000424 adj=49999418 sd_pos=4657088 heater_bed: target=60 temp=60.0 pwm=0.150 sysload=0.40 cputime=6020.083 memavail=3272388 print_time=20632.258 buffer_time=3.151 print_stall=0 extruder: target=210 temp=208.9 pwm=0.453
Stats 66597.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67701196 bytes_read=10231129 bytes_retransmit=9 bytes_invalid=0 send_seq=1281653 receive_seq=1281652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=12459 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126189 bytes_read=390568 bytes_retransmit=0 bytes_invalid=0 send_seq=21007 receive_seq=21007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000427 adj=49999445 sd_pos=4657088 heater_bed: target=60 temp=60.0 pwm=0.203 sysload=0.40 cputime=6020.132 memavail=3272388 print_time=20632.258 buffer_time=2.150 print_stall=0 extruder: target=210 temp=208.9 pwm=0.453
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66598.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67711999 bytes_read=10232301 bytes_retransmit=9 bytes_invalid=0 send_seq=1281843 receive_seq=1281843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=14860 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126195 bytes_read=390584 bytes_retransmit=0 bytes_invalid=0 send_seq=21008 receive_seq=21008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000426 adj=49999459 sd_pos=4659522 heater_bed: target=60 temp=60.0 pwm=0.082 sysload=0.40 cputime=6020.248 memavail=3272388 print_time=20633.490 buffer_time=2.381 print_stall=0 extruder: target=210 temp=209.1 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66599.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67723102 bytes_read=10233492 bytes_retransmit=9 bytes_invalid=0 send_seq=1282038 receive_seq=1282038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=27 upcoming_bytes=18511 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126201 bytes_read=390600 bytes_retransmit=0 bytes_invalid=0 send_seq=21009 receive_seq=21009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000425 adj=49999470 sd_pos=4661802 heater_bed: target=60 temp=60.0 pwm=0.206 sysload=0.69 cputime=6020.437 memavail=3271380 print_time=20634.823 buffer_time=2.713 print_stall=0 extruder: target=210 temp=209.5 pwm=0.365
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66600.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67733844 bytes_read=10234584 bytes_retransmit=9 bytes_invalid=0 send_seq=1282216 receive_seq=1282216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=22783 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126207 bytes_read=390616 bytes_retransmit=0 bytes_invalid=0 send_seq=21010 receive_seq=21010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000422 adj=49999443 sd_pos=4664311 heater_bed: target=60 temp=60.0 pwm=0.091 sysload=0.69 cputime=6020.557 memavail=3271392 print_time=20636.210 buffer_time=3.099 print_stall=0 extruder: target=210 temp=210.0 pwm=0.305
Stats 66601.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67745121 bytes_read=10235751 bytes_retransmit=9 bytes_invalid=0 send_seq=1282406 receive_seq=1282406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=12584 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126213 bytes_read=390645 bytes_retransmit=0 bytes_invalid=0 send_seq=21011 receive_seq=21011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000418 adj=49999434 sd_pos=4664311 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.69 cputime=6020.606 memavail=3271392 print_time=20636.210 buffer_time=2.099 print_stall=0 extruder: target=210 temp=210.3 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66602.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67756535 bytes_read=10236978 bytes_retransmit=9 bytes_invalid=0 send_seq=1282605 receive_seq=1282605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=15766 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126219 bytes_read=390661 bytes_retransmit=0 bytes_invalid=0 send_seq=21012 receive_seq=21012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000414 adj=49999401 sd_pos=4666620 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.69 cputime=6020.721 memavail=3271140 print_time=20637.577 buffer_time=2.465 print_stall=0 extruder: target=210 temp=210.8 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66603.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67767737 bytes_read=10238170 bytes_retransmit=9 bytes_invalid=0 send_seq=1282803 receive_seq=1282803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=22077 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126225 bytes_read=390677 bytes_retransmit=0 bytes_invalid=0 send_seq=21013 receive_seq=21013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000411 adj=49999361 sd_pos=4669050 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.69 cputime=6020.836 memavail=3270888 print_time=20639.098 buffer_time=2.984 print_stall=0 extruder: target=210 temp=211.0 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66604.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67779779 bytes_read=10239439 bytes_retransmit=9 bytes_invalid=0 send_seq=1283011 receive_seq=1283011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=26504 freq=400007682 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126231 bytes_read=390693 bytes_retransmit=0 bytes_invalid=0 send_seq=21014 receive_seq=21014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000412 adj=49999382 sd_pos=4671586 heater_bed: target=60 temp=60.0 pwm=0.024 sysload=0.63 cputime=6021.033 memavail=3270664 print_time=20640.594 buffer_time=3.373 print_stall=0 extruder: target=210 temp=211.2 pwm=0.244
Stats 66605.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67791304 bytes_read=10240643 bytes_retransmit=9 bytes_invalid=0 send_seq=1283212 receive_seq=1283212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=16147 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126237 bytes_read=390709 bytes_retransmit=0 bytes_invalid=0 send_seq=21015 receive_seq=21015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000410 adj=49999334 sd_pos=4671586 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.63 cputime=6021.083 memavail=3270416 print_time=20640.594 buffer_time=2.373 print_stall=0 extruder: target=210 temp=211.2 pwm=0.244
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66606.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67803398 bytes_read=10241885 bytes_retransmit=9 bytes_invalid=0 send_seq=1283417 receive_seq=1283417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=19587 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126243 bytes_read=390738 bytes_retransmit=0 bytes_invalid=0 send_seq=21016 receive_seq=21016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000411 adj=49999332 sd_pos=4673925 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.63 cputime=6021.201 memavail=3270416 print_time=20642.006 buffer_time=2.784 print_stall=0 extruder: target=210 temp=211.0 pwm=0.287
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66607.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67814674 bytes_read=10243092 bytes_retransmit=9 bytes_invalid=0 send_seq=1283612 receive_seq=1283612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=22408 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126249 bytes_read=390754 bytes_retransmit=0 bytes_invalid=0 send_seq=21017 receive_seq=21017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000411 adj=49999336 sd_pos=4676334 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.63 cputime=6021.321 memavail=3270416 print_time=20643.302 buffer_time=3.080 print_stall=0 extruder: target=210 temp=210.8 pwm=0.341
Stats 66608.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67825888 bytes_read=10244229 bytes_retransmit=9 bytes_invalid=0 send_seq=1283799 receive_seq=1283799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=12293 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126255 bytes_read=390770 bytes_retransmit=0 bytes_invalid=0 send_seq=21018 receive_seq=21018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000409 adj=49999382 sd_pos=4676334 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.63 cputime=6021.370 memavail=3270416 print_time=20643.302 buffer_time=2.079 print_stall=0 extruder: target=210 temp=210.5 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66609.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67837081 bytes_read=10245381 bytes_retransmit=9 bytes_invalid=0 send_seq=1283986 receive_seq=1283986 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=15497 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126261 bytes_read=390786 bytes_retransmit=0 bytes_invalid=0 send_seq=21019 receive_seq=21019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000408 adj=49999366 sd_pos=4678590 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.66 cputime=6021.491 memavail=3269156 print_time=20644.615 buffer_time=2.391 print_stall=0 extruder: target=210 temp=210.2 pwm=0.341
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66610.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67848351 bytes_read=10246582 bytes_retransmit=9 bytes_invalid=0 send_seq=1284183 receive_seq=1284183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=14089 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126267 bytes_read=390802 bytes_retransmit=0 bytes_invalid=0 send_seq=21020 receive_seq=21020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000413 adj=49999358 sd_pos=4680197 heater_bed: target=60 temp=60.0 pwm=0.197 sysload=0.66 cputime=6021.640 memavail=3269168 print_time=20645.575 buffer_time=2.350 print_stall=0 extruder: target=210 temp=209.9 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66611.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=67859784 bytes_read=10247789 bytes_retransmit=9 bytes_invalid=0 send_seq=1284384 receive_seq=1284384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=9344 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126273 bytes_read=390831 bytes_retransmit=0 bytes_invalid=0 send_seq=21021 receive_seq=21021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000411 adj=49999355 sd_pos=4683154 heater_bed: target=60 temp=60.0 pwm=0.035 sysload=0.66 cputime=6021.723 memavail=3268916 print_time=20646.466 buffer_time=2.240 print_stall=0 extruder: target=210 temp=209.7 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66612.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67870050 bytes_read=10248927 bytes_retransmit=9 bytes_invalid=0 send_seq=1284565 receive_seq=1284565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=4539 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126279 bytes_read=390847 bytes_retransmit=0 bytes_invalid=0 send_seq=21022 receive_seq=21022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000407 adj=49999351 sd_pos=4684715 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.66 cputime=6021.857 memavail=3268412 print_time=20647.299 buffer_time=2.072 print_stall=0 extruder: target=210 temp=209.6 pwm=0.401
Stats 66613.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67877522 bytes_read=10249818 bytes_retransmit=9 bytes_invalid=0 send_seq=1284700 receive_seq=1284700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=1291 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126285 bytes_read=390863 bytes_retransmit=0 bytes_invalid=0 send_seq=21023 receive_seq=21023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000405 adj=49999330 sd_pos=4684788 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.66 cputime=6022.076 memavail=3268412 print_time=20648.325 buffer_time=2.098 print_stall=0 extruder: target=210 temp=209.6 pwm=0.401
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66614.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67883675 bytes_read=10250585 bytes_retransmit=9 bytes_invalid=0 send_seq=1284813 receive_seq=1284813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=1105 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126291 bytes_read=390879 bytes_retransmit=0 bytes_invalid=0 send_seq=21024 receive_seq=21024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000402 adj=49999338 sd_pos=4687010 heater_bed: target=60 temp=60.0 pwm=0.268 sysload=0.61 cputime=6022.166 memavail=3267656 print_time=20649.307 buffer_time=2.079 print_stall=0 extruder: target=210 temp=209.7 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66615.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67887452 bytes_read=10251181 bytes_retransmit=9 bytes_invalid=0 send_seq=1284887 receive_seq=1284887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=3702 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126297 bytes_read=390895 bytes_retransmit=0 bytes_invalid=0 send_seq=21025 receive_seq=21025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000398 adj=49999328 sd_pos=4689521 heater_bed: target=60 temp=60.0 pwm=0.004 sysload=0.61 cputime=6022.359 memavail=3267404 print_time=20650.441 buffer_time=2.212 print_stall=0 extruder: target=210 temp=209.9 pwm=0.371
Stats 66616.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67893503 bytes_read=10251937 bytes_retransmit=9 bytes_invalid=0 send_seq=1284998 receive_seq=1284998 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1409 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=126303 bytes_read=390924 bytes_retransmit=0 bytes_invalid=0 send_seq=21026 receive_seq=21026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000397 adj=49999325 sd_pos=4689521 heater_bed: target=60 temp=60.0 pwm=0.065 sysload=0.61 cputime=6022.568 memavail=3267408 print_time=20651.441 buffer_time=2.206 print_stall=0 extruder: target=210 temp=209.9 pwm=0.371
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66617.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67899690 bytes_read=10252725 bytes_retransmit=9 bytes_invalid=0 send_seq=1285112 receive_seq=1285112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=16000 freq=400007664 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=126309 bytes_read=390940 bytes_retransmit=0 bytes_invalid=0 send_seq=21027 receive_seq=21027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000396 adj=49999318 sd_pos=4692926 heater_bed: target=60 temp=60.0 pwm=0.199 sysload=0.61 cputime=6022.733 memavail=3267408 print_time=20653.491 buffer_time=3.255 print_stall=0 extruder: target=210 temp=209.9 pwm=0.371
Stats 66618.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67903635 bytes_read=10253341 bytes_retransmit=9 bytes_invalid=0 send_seq=1285189 receive_seq=1285189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=12612 freq=400007698 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=126315 bytes_read=390956 bytes_retransmit=0 bytes_invalid=0 send_seq=21028 receive_seq=21028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000395 adj=49999386 sd_pos=4692926 heater_bed: target=60 temp=60.0 pwm=0.243 sysload=0.61 cputime=6022.766 memavail=3267408 print_time=20653.491 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.7 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66619.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67911622 bytes_read=10254248 bytes_retransmit=9 bytes_invalid=0 send_seq=1285330 receive_seq=1285330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=20876 freq=400007779 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=126321 bytes_read=390972 bytes_retransmit=0 bytes_invalid=0 send_seq=21029 receive_seq=21029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000393 adj=49999340 sd_pos=4695331 heater_bed: target=60 temp=60.0 pwm=0.046 sysload=0.56 cputime=6022.866 memavail=3266660 print_time=20654.838 buffer_time=2.600 print_stall=0 extruder: target=210 temp=209.7 pwm=0.368
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66620.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67924337 bytes_read=10255560 bytes_retransmit=9 bytes_invalid=0 send_seq=1285552 receive_seq=1285552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=24843 freq=400007767 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=126327 bytes_read=390988 bytes_retransmit=0 bytes_invalid=0 send_seq=21030 receive_seq=21030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000389 adj=49999225 sd_pos=4697825 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.56 cputime=6022.976 memavail=3266660 print_time=20656.235 buffer_time=2.997 print_stall=0 extruder: target=210 temp=209.4 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66621.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67937797 bytes_read=10256961 bytes_retransmit=9 bytes_invalid=0 send_seq=1285786 receive_seq=1285786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=28726 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126333 bytes_read=391017 bytes_retransmit=0 bytes_invalid=0 send_seq=21031 receive_seq=21031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000388 adj=49999252 sd_pos=4700474 heater_bed: target=60 temp=60.0 pwm=0.222 sysload=0.56 cputime=6023.190 memavail=3266660 print_time=20657.689 buffer_time=3.342 print_stall=0 extruder: target=210 temp=209.2 pwm=0.429
Stats 66622.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67950614 bytes_read=10258264 bytes_retransmit=9 bytes_invalid=0 send_seq=1286003 receive_seq=1286003 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=17143 freq=400007761 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126339 bytes_read=391033 bytes_retransmit=0 bytes_invalid=0 send_seq=21032 receive_seq=21032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000384 adj=49999277 sd_pos=4700474 heater_bed: target=60 temp=60.0 pwm=0.209 sysload=0.56 cputime=6023.240 memavail=3266660 print_time=20657.689 buffer_time=2.342 print_stall=0 extruder: target=210 temp=209.2 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66623.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67962839 bytes_read=10259530 bytes_retransmit=9 bytes_invalid=0 send_seq=1286210 receive_seq=1286210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=23602 freq=400007832 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126345 bytes_read=391049 bytes_retransmit=0 bytes_invalid=0 send_seq=21033 receive_seq=21033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000380 adj=49999265 sd_pos=4703044 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.56 cputime=6023.356 memavail=3266188 print_time=20659.220 buffer_time=2.872 print_stall=0 extruder: target=210 temp=209.3 pwm=0.429
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66624.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67974753 bytes_read=10260722 bytes_retransmit=9 bytes_invalid=0 send_seq=1286408 receive_seq=1286408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=31750 freq=400007818 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126351 bytes_read=391065 bytes_retransmit=0 bytes_invalid=0 send_seq=21034 receive_seq=21034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000376 adj=49999147 sd_pos=4705816 heater_bed: target=60 temp=60.0 pwm=0.078 sysload=0.52 cputime=6023.473 memavail=3266188 print_time=20660.836 buffer_time=3.487 print_stall=0 extruder: target=210 temp=209.3 pwm=0.417
Stats 66625.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=67987795 bytes_read=10262063 bytes_retransmit=9 bytes_invalid=0 send_seq=1286633 receive_seq=1286633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=19994 freq=400007803 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126357 bytes_read=391081 bytes_retransmit=0 bytes_invalid=0 send_seq=21035 receive_seq=21035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000372 adj=49999221 sd_pos=4705816 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.52 cputime=6023.527 memavail=3266188 print_time=20660.836 buffer_time=2.486 print_stall=0 extruder: target=210 temp=209.6 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66626.9: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68000297 bytes_read=10263340 bytes_retransmit=9 bytes_invalid=0 send_seq=1286846 receive_seq=1286846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=25847 freq=400007789 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126363 bytes_read=391110 bytes_retransmit=0 bytes_invalid=0 send_seq=21036 receive_seq=21036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000369 adj=49999206 sd_pos=4708533 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.52 cputime=6023.648 memavail=3266188 print_time=20662.357 buffer_time=3.006 print_stall=0 extruder: target=210 temp=210.1 pwm=0.294
Stats 66627.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68013550 bytes_read=10264693 bytes_retransmit=9 bytes_invalid=0 send_seq=1287073 receive_seq=1287073 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=13919 freq=400007790 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126369 bytes_read=391126 bytes_retransmit=0 bytes_invalid=0 send_seq=21037 receive_seq=21037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000370 adj=49999198 sd_pos=4708533 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.52 cputime=6023.745 memavail=3266188 print_time=20662.357 buffer_time=2.006 print_stall=0 extruder: target=210 temp=210.4 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66628.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68026500 bytes_read=10266020 bytes_retransmit=9 bytes_invalid=0 send_seq=1287295 receive_seq=1287295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=18339 freq=400007771 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126375 bytes_read=391142 bytes_retransmit=0 bytes_invalid=0 send_seq=21038 receive_seq=21038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000368 adj=49999209 sd_pos=4711104 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.52 cputime=6023.913 memavail=3265432 print_time=20663.835 buffer_time=2.484 print_stall=0 extruder: target=210 temp=210.7 pwm=0.294
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66629.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68038653 bytes_read=10267291 bytes_retransmit=9 bytes_invalid=0 send_seq=1287506 receive_seq=1287506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=23040 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126381 bytes_read=391158 bytes_retransmit=0 bytes_invalid=0 send_seq=21039 receive_seq=21039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000365 adj=49999214 sd_pos=4713696 heater_bed: target=60 temp=60.0 pwm=0.090 sysload=0.47 cputime=6024.029 memavail=3266448 print_time=20665.245 buffer_time=2.893 print_stall=0 extruder: target=210 temp=211.1 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66631.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68050496 bytes_read=10268513 bytes_retransmit=9 bytes_invalid=0 send_seq=1287710 receive_seq=1287710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=28477 freq=400007738 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126387 bytes_read=391174 bytes_retransmit=0 bytes_invalid=0 send_seq=21040 receive_seq=21040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000362 adj=49999275 sd_pos=4716282 heater_bed: target=60 temp=60.0 pwm=0.193 sysload=0.47 cputime=6024.148 memavail=3266448 print_time=20666.680 buffer_time=3.328 print_stall=0 extruder: target=210 temp=211.3 pwm=0.240
Stats 66632.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68062892 bytes_read=10269765 bytes_retransmit=9 bytes_invalid=0 send_seq=1287917 receive_seq=1287917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=17258 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126393 bytes_read=391203 bytes_retransmit=0 bytes_invalid=0 send_seq=21041 receive_seq=21041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000361 adj=49999301 sd_pos=4716282 heater_bed: target=60 temp=60.0 pwm=0.204 sysload=0.47 cputime=6024.199 memavail=3265944 print_time=20666.680 buffer_time=2.327 print_stall=0 extruder: target=210 temp=211.4 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66633.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68075306 bytes_read=10271072 bytes_retransmit=9 bytes_invalid=0 send_seq=1288132 receive_seq=1288132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=21124 freq=400007701 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126399 bytes_read=391219 bytes_retransmit=0 bytes_invalid=0 send_seq=21042 receive_seq=21042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000359 adj=49999303 sd_pos=4718766 heater_bed: target=60 temp=60.0 pwm=0.005 sysload=0.47 cputime=6024.314 memavail=3265948 print_time=20668.095 buffer_time=2.740 print_stall=0 extruder: target=210 temp=211.3 pwm=0.240
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66634.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68087740 bytes_read=10272354 bytes_retransmit=9 bytes_invalid=0 send_seq=1288348 receive_seq=1288348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=25913 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126405 bytes_read=391235 bytes_retransmit=0 bytes_invalid=0 send_seq=21043 receive_seq=21043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000356 adj=49999313 sd_pos=4721187 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.47 cputime=6024.492 memavail=3265948 print_time=20669.522 buffer_time=3.167 print_stall=0 extruder: target=210 temp=211.1 pwm=0.271
Stats 66635.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68099736 bytes_read=10273606 bytes_retransmit=9 bytes_invalid=0 send_seq=1288555 receive_seq=1288555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=15135 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126411 bytes_read=391251 bytes_retransmit=0 bytes_invalid=0 send_seq=21044 receive_seq=21044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000353 adj=49999319 sd_pos=4721187 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.44 cputime=6024.541 memavail=3265948 print_time=20669.522 buffer_time=2.166 print_stall=0 extruder: target=210 temp=210.9 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66636.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68111759 bytes_read=10274873 bytes_retransmit=9 bytes_invalid=0 send_seq=1288763 receive_seq=1288763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=22300 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126423 bytes_read=391283 bytes_retransmit=0 bytes_invalid=0 send_seq=21046 receive_seq=21046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000350 adj=49999270 sd_pos=4723775 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.44 cputime=6024.658 memavail=3265948 print_time=20671.090 buffer_time=2.733 print_stall=0 extruder: target=210 temp=210.5 pwm=0.333
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66637.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68124148 bytes_read=10276153 bytes_retransmit=9 bytes_invalid=0 send_seq=1288979 receive_seq=1288979 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=28750 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126429 bytes_read=391312 bytes_retransmit=0 bytes_invalid=0 send_seq=21047 receive_seq=21047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000348 adj=49999282 sd_pos=4726398 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.44 cputime=6024.772 memavail=3265948 print_time=20672.647 buffer_time=3.289 print_stall=0 extruder: target=210 temp=210.2 pwm=0.397
Stats 66638.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68137244 bytes_read=10277509 bytes_retransmit=9 bytes_invalid=0 send_seq=1289204 receive_seq=1289204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=16960 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126435 bytes_read=391328 bytes_retransmit=0 bytes_invalid=0 send_seq=21048 receive_seq=21048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000346 adj=49999313 sd_pos=4726398 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.44 cputime=6024.822 memavail=3265948 print_time=20672.647 buffer_time=2.288 print_stall=0 extruder: target=210 temp=209.8 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66639.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68149680 bytes_read=10278800 bytes_retransmit=9 bytes_invalid=0 send_seq=1289419 receive_seq=1289419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=18817 freq=400007697 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126441 bytes_read=391344 bytes_retransmit=0 bytes_invalid=0 send_seq=21049 receive_seq=21049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000347 adj=49999302 sd_pos=4728874 heater_bed: target=60 temp=60.0 pwm=0.181 sysload=0.44 cputime=6024.932 memavail=3265948 print_time=20673.860 buffer_time=2.501 print_stall=0 extruder: target=210 temp=209.5 pwm=0.397
Stats 66640.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68162191 bytes_read=10280082 bytes_retransmit=9 bytes_invalid=0 send_seq=1289635 receive_seq=1289635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=10598 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126447 bytes_read=391360 bytes_retransmit=0 bytes_invalid=0 send_seq=21050 receive_seq=21050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000350 adj=49999286 sd_pos=4730782 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.48 cputime=6025.061 memavail=3265452 print_time=20674.384 buffer_time=2.024 print_stall=0 extruder: target=210 temp=209.5 pwm=0.397
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66641.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68174186 bytes_read=10281329 bytes_retransmit=9 bytes_invalid=0 send_seq=1289841 receive_seq=1289841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=5577 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126453 bytes_read=391376 bytes_retransmit=0 bytes_invalid=0 send_seq=21051 receive_seq=21051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000349 adj=49999320 sd_pos=4732982 heater_bed: target=60 temp=60.0 pwm=0.189 sysload=0.48 cputime=6025.295 memavail=3264952 print_time=20675.506 buffer_time=2.146 print_stall=0 extruder: target=210 temp=209.5 pwm=0.389
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66642.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68182478 bytes_read=10282240 bytes_retransmit=9 bytes_invalid=0 send_seq=1289980 receive_seq=1289980 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1880 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126459 bytes_read=391405 bytes_retransmit=0 bytes_invalid=0 send_seq=21052 receive_seq=21052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000348 adj=49999321 sd_pos=4733210 heater_bed: target=60 temp=60.0 pwm=0.196 sysload=0.48 cputime=6025.516 memavail=3264196 print_time=20676.664 buffer_time=2.304 print_stall=0 extruder: target=210 temp=209.6 pwm=0.389
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66643.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68188662 bytes_read=10283023 bytes_retransmit=9 bytes_invalid=0 send_seq=1290093 receive_seq=1290093 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=1247 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126465 bytes_read=391421 bytes_retransmit=0 bytes_invalid=0 send_seq=21053 receive_seq=21053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000346 adj=49999338 sd_pos=4736029 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.48 cputime=6025.587 memavail=3264196 print_time=20677.499 buffer_time=2.137 print_stall=0 extruder: target=210 temp=209.8 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66644.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68192211 bytes_read=10283555 bytes_retransmit=9 bytes_invalid=0 send_seq=1290156 receive_seq=1290156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=3408 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126471 bytes_read=391437 bytes_retransmit=0 bytes_invalid=0 send_seq=21054 receive_seq=21054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000343 adj=49999327 sd_pos=4737609 heater_bed: target=60 temp=60.0 pwm=0.045 sysload=0.48 cputime=6025.744 memavail=3264196 print_time=20678.572 buffer_time=2.205 print_stall=0 extruder: target=210 temp=209.9 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66645.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68198385 bytes_read=10284331 bytes_retransmit=9 bytes_invalid=0 send_seq=1290268 receive_seq=1290268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2652 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126477 bytes_read=391453 bytes_retransmit=0 bytes_invalid=0 send_seq=21055 receive_seq=21055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000340 adj=49999325 sd_pos=4738069 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.52 cputime=6025.972 memavail=3264452 print_time=20679.841 buffer_time=2.459 print_stall=0 extruder: target=210 temp=209.9 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66646.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68204406 bytes_read=10285058 bytes_retransmit=9 bytes_invalid=0 send_seq=1290373 receive_seq=1290373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=12020 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126483 bytes_read=391469 bytes_retransmit=0 bytes_invalid=0 send_seq=21056 receive_seq=21056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000341 adj=49999319 sd_pos=4740244 heater_bed: target=60 temp=60.0 pwm=0.060 sysload=0.52 cputime=6026.089 memavail=3264452 print_time=20681.176 buffer_time=2.792 print_stall=0 extruder: target=210 temp=209.8 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66647.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68208178 bytes_read=10285650 bytes_retransmit=9 bytes_invalid=0 send_seq=1290448 receive_seq=1290448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=22359 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126489 bytes_read=391498 bytes_retransmit=0 bytes_invalid=0 send_seq=21057 receive_seq=21057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000341 adj=49999364 sd_pos=4742067 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.52 cputime=6026.278 memavail=3263700 print_time=20682.421 buffer_time=3.037 print_stall=0 extruder: target=210 temp=209.6 pwm=0.395
Stats 66648.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68218308 bytes_read=10286762 bytes_retransmit=9 bytes_invalid=0 send_seq=1290625 receive_seq=1290625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=13279 freq=400007669 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126495 bytes_read=391514 bytes_retransmit=0 bytes_invalid=0 send_seq=21058 receive_seq=21058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000338 adj=49999329 sd_pos=4742067 heater_bed: target=60 temp=60.0 pwm=0.033 sysload=0.52 cputime=6026.324 memavail=3264440 print_time=20682.421 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.3 pwm=0.464
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66649.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68229801 bytes_read=10287959 bytes_retransmit=9 bytes_invalid=0 send_seq=1290824 receive_seq=1290824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=17129 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126501 bytes_read=391530 bytes_retransmit=0 bytes_invalid=0 send_seq=21059 receive_seq=21059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000335 adj=49999312 sd_pos=4743974 heater_bed: target=60 temp=60.0 pwm=0.227 sysload=0.52 cputime=6026.450 memavail=3268148 print_time=20683.696 buffer_time=2.310 print_stall=0 extruder: target=210 temp=209.0 pwm=0.464
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66650.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68242227 bytes_read=10289246 bytes_retransmit=9 bytes_invalid=0 send_seq=1291038 receive_seq=1291038 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=20386 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126507 bytes_read=391546 bytes_retransmit=0 bytes_invalid=0 send_seq=21060 receive_seq=21060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000336 adj=49999257 sd_pos=4746129 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.64 cputime=6026.570 memavail=3267144 print_time=20685.024 buffer_time=2.638 print_stall=0 extruder: target=210 temp=208.9 pwm=0.464
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66651.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68254706 bytes_read=10290542 bytes_retransmit=9 bytes_invalid=0 send_seq=1291254 receive_seq=1291254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=25511 freq=400007662 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126513 bytes_read=391562 bytes_retransmit=0 bytes_invalid=0 send_seq=21061 receive_seq=21061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000336 adj=49999317 sd_pos=4748393 heater_bed: target=60 temp=60.0 pwm=0.073 sysload=0.64 cputime=6026.688 memavail=3267144 print_time=20686.503 buffer_time=3.116 print_stall=0 extruder: target=210 temp=208.8 pwm=0.464
Stats 66652.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68267211 bytes_read=10291824 bytes_retransmit=9 bytes_invalid=0 send_seq=1291470 receive_seq=1291470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=14233 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126519 bytes_read=391591 bytes_retransmit=0 bytes_invalid=0 send_seq=21062 receive_seq=21062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000333 adj=49999342 sd_pos=4748393 heater_bed: target=60 temp=60.0 pwm=0.218 sysload=0.64 cputime=6026.746 memavail=3267144 print_time=20686.503 buffer_time=2.115 print_stall=0 extruder: target=210 temp=209.0 pwm=0.464
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66653.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68278982 bytes_read=10293082 bytes_retransmit=9 bytes_invalid=0 send_seq=1291675 receive_seq=1291675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=18908 freq=400007672 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126525 bytes_read=391607 bytes_retransmit=0 bytes_invalid=0 send_seq=21063 receive_seq=21063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000331 adj=49999295 sd_pos=4750662 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.64 cputime=6026.919 memavail=3267144 print_time=20687.873 buffer_time=2.484 print_stall=0 extruder: target=210 temp=209.1 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66654.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68291402 bytes_read=10294338 bytes_retransmit=9 bytes_invalid=0 send_seq=1291883 receive_seq=1291883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=20614 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126531 bytes_read=391623 bytes_retransmit=0 bytes_invalid=0 send_seq=21064 receive_seq=21064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000330 adj=49999285 sd_pos=4752629 heater_bed: target=60 temp=60.0 pwm=0.109 sysload=0.64 cputime=6027.038 memavail=3267144 print_time=20689.053 buffer_time=2.664 print_stall=0 extruder: target=210 temp=209.6 pwm=0.362
Stats 66655.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68303598 bytes_read=10295585 bytes_retransmit=9 bytes_invalid=0 send_seq=1292092 receive_seq=1292092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=22578 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126537 bytes_read=391639 bytes_retransmit=0 bytes_invalid=0 send_seq=21065 receive_seq=21065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000329 adj=49999312 sd_pos=4754263 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.59 cputime=6027.172 memavail=3267144 print_time=20690.187 buffer_time=2.797 print_stall=0 extruder: target=210 temp=210.1 pwm=0.296
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66656.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68316128 bytes_read=10296882 bytes_retransmit=9 bytes_invalid=0 send_seq=1292308 receive_seq=1292308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=25608 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126543 bytes_read=391655 bytes_retransmit=0 bytes_invalid=0 send_seq=21066 receive_seq=21066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000329 adj=49999340 sd_pos=4756475 heater_bed: target=60 temp=60.0 pwm=0.146 sysload=0.59 cputime=6027.296 memavail=3267144 print_time=20691.498 buffer_time=3.107 print_stall=0 extruder: target=210 temp=210.5 pwm=0.296
Stats 66657.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68328110 bytes_read=10298118 bytes_retransmit=9 bytes_invalid=0 send_seq=1292512 receive_seq=1292512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=14799 freq=400007621 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126549 bytes_read=391684 bytes_retransmit=0 bytes_invalid=0 send_seq=21067 receive_seq=21067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000329 adj=49999358 sd_pos=4756475 heater_bed: target=60 temp=60.0 pwm=0.069 sysload=0.59 cputime=6027.346 memavail=3267144 print_time=20691.498 buffer_time=2.106 print_stall=0 extruder: target=210 temp=211.0 pwm=0.242
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66658.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68341000 bytes_read=10299451 bytes_retransmit=9 bytes_invalid=0 send_seq=1292735 receive_seq=1292735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=16848 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126555 bytes_read=391700 bytes_retransmit=0 bytes_invalid=0 send_seq=21068 receive_seq=21068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000329 adj=49999368 sd_pos=4758631 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.59 cputime=6027.501 memavail=3266904 print_time=20692.757 buffer_time=2.364 print_stall=0 extruder: target=210 temp=211.2 pwm=0.242
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66659.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68352888 bytes_read=10300688 bytes_retransmit=9 bytes_invalid=0 send_seq=1292940 receive_seq=1292940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=22908 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126561 bytes_read=391716 bytes_retransmit=0 bytes_invalid=0 send_seq=21069 receive_seq=21069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000327 adj=49999382 sd_pos=4760992 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.59 cputime=6027.686 memavail=3271180 print_time=20694.233 buffer_time=2.839 print_stall=0 extruder: target=210 temp=211.4 pwm=0.242
Stats 66660.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68365128 bytes_read=10301959 bytes_retransmit=9 bytes_invalid=0 send_seq=1293151 receive_seq=1293151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=28415 freq=400007592 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126567 bytes_read=391732 bytes_retransmit=0 bytes_invalid=0 send_seq=21070 receive_seq=21070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000324 adj=49999376 sd_pos=4763148 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.78 cputime=6027.802 memavail=3270184 print_time=20695.667 buffer_time=3.272 print_stall=0 extruder: target=210 temp=211.4 pwm=0.242
Stats 66661.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68377561 bytes_read=10303236 bytes_retransmit=9 bytes_invalid=0 send_seq=1293366 receive_seq=1293366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=17188 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126573 bytes_read=391748 bytes_retransmit=0 bytes_invalid=0 send_seq=21071 receive_seq=21071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000321 adj=49999359 sd_pos=4763148 heater_bed: target=60 temp=60.0 pwm=0.177 sysload=0.78 cputime=6027.854 memavail=3270184 print_time=20695.667 buffer_time=2.271 print_stall=0 extruder: target=210 temp=211.2 pwm=0.263
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66662.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68389926 bytes_read=10304523 bytes_retransmit=9 bytes_invalid=0 send_seq=1293580 receive_seq=1293580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=21050 freq=400007573 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126579 bytes_read=391777 bytes_retransmit=0 bytes_invalid=0 send_seq=21072 receive_seq=21072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000322 adj=49999337 sd_pos=4765279 heater_bed: target=60 temp=60.0 pwm=0.017 sysload=0.78 cputime=6027.980 memavail=3270184 print_time=20696.966 buffer_time=2.570 print_stall=0 extruder: target=210 temp=211.0 pwm=0.316
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66663.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68402958 bytes_read=10305875 bytes_retransmit=9 bytes_invalid=0 send_seq=1293804 receive_seq=1293804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=22441 freq=400007564 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126585 bytes_read=391793 bytes_retransmit=0 bytes_invalid=0 send_seq=21073 receive_seq=21073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000321 adj=49999366 sd_pos=4767578 heater_bed: target=60 temp=60.0 pwm=0.171 sysload=0.78 cputime=6028.095 memavail=3269680 print_time=20698.162 buffer_time=2.765 print_stall=0 extruder: target=210 temp=210.7 pwm=0.316
Stats 66664.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68415811 bytes_read=10307177 bytes_retransmit=9 bytes_invalid=0 send_seq=1294024 receive_seq=1294024 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12656 freq=400007561 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126591 bytes_read=391809 bytes_retransmit=0 bytes_invalid=0 send_seq=21074 receive_seq=21074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000322 adj=49999369 sd_pos=4768511 heater_bed: target=60 temp=60.0 pwm=0.039 sysload=0.78 cputime=6028.185 memavail=3269680 print_time=20698.416 buffer_time=2.019 print_stall=0 extruder: target=210 temp=210.4 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66665.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68428324 bytes_read=10308474 bytes_retransmit=9 bytes_invalid=0 send_seq=1294240 receive_seq=1294240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=7748 freq=400007568 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126597 bytes_read=391825 bytes_retransmit=0 bytes_invalid=0 send_seq=21075 receive_seq=21075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000322 adj=49999384 sd_pos=4771718 heater_bed: target=60 temp=60.0 pwm=0.216 sysload=0.72 cputime=6028.412 memavail=3268672 print_time=20699.504 buffer_time=2.106 print_stall=0 extruder: target=210 temp=210.1 pwm=0.367
Stats 66666.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68438426 bytes_read=10309560 bytes_retransmit=9 bytes_invalid=0 send_seq=1294414 receive_seq=1294414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2092 freq=400007560 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126603 bytes_read=391841 bytes_retransmit=0 bytes_invalid=0 send_seq=21076 receive_seq=21076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000323 adj=49999368 sd_pos=4771834 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.72 cputime=6028.644 memavail=3268168 print_time=20700.526 buffer_time=2.127 print_stall=0 extruder: target=210 temp=209.8 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66667.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68445252 bytes_read=10310382 bytes_retransmit=9 bytes_invalid=0 send_seq=1294538 receive_seq=1294538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1804 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126609 bytes_read=391870 bytes_retransmit=0 bytes_invalid=0 send_seq=21077 receive_seq=21077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000321 adj=49999392 sd_pos=4773910 heater_bed: target=60 temp=60.0 pwm=0.135 sysload=0.72 cputime=6028.759 memavail=3268168 print_time=20701.604 buffer_time=2.205 print_stall=0 extruder: target=210 temp=209.5 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66668.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68449078 bytes_read=10310980 bytes_retransmit=9 bytes_invalid=0 send_seq=1294611 receive_seq=1294611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=36 upcoming_bytes=4076 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126615 bytes_read=391885 bytes_retransmit=0 bytes_invalid=0 send_seq=21078 receive_seq=21078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000320 adj=49999349 sd_pos=4776385 heater_bed: target=60 temp=60.0 pwm=0.128 sysload=0.72 cputime=6028.882 memavail=3267680 print_time=20702.680 buffer_time=2.280 print_stall=0 extruder: target=210 temp=209.4 pwm=0.424
Stats 66669.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68454952 bytes_read=10311730 bytes_retransmit=9 bytes_invalid=0 send_seq=1294718 receive_seq=1294718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=1411 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126621 bytes_read=391900 bytes_retransmit=0 bytes_invalid=0 send_seq=21079 receive_seq=21079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000318 adj=49999267 sd_pos=4776472 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.72 cputime=6029.054 memavail=3266672 print_time=20703.437 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.3 pwm=0.424
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66670.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68461515 bytes_read=10312512 bytes_retransmit=9 bytes_invalid=0 send_seq=1294835 receive_seq=1294835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=15412 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126627 bytes_read=391915 bytes_retransmit=0 bytes_invalid=0 send_seq=21080 receive_seq=21080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000315 adj=49999232 sd_pos=4779364 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.74 cputime=6029.261 memavail=3266204 print_time=20705.656 buffer_time=3.255 print_stall=0 extruder: target=210 temp=209.1 pwm=0.424
Stats 66671.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68465693 bytes_read=10313124 bytes_retransmit=9 bytes_invalid=0 send_seq=1294914 receive_seq=1294914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=11811 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126633 bytes_read=391930 bytes_retransmit=0 bytes_invalid=0 send_seq=21081 receive_seq=21081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000315 adj=49999314 sd_pos=4779364 heater_bed: target=60 temp=60.0 pwm=0.071 sysload=0.74 cputime=6029.328 memavail=3266204 print_time=20705.656 buffer_time=2.254 print_stall=0 extruder: target=210 temp=209.0 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66672.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68472967 bytes_read=10313980 bytes_retransmit=9 bytes_invalid=0 send_seq=1295042 receive_seq=1295042 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=18 upcoming_bytes=22358 freq=400007613 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=126639 bytes_read=391958 bytes_retransmit=0 bytes_invalid=0 send_seq=21082 receive_seq=21082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000312 adj=49999302 sd_pos=4781806 heater_bed: target=60 temp=60.0 pwm=0.149 sysload=0.74 cputime=6029.474 memavail=3266456 print_time=20707.147 buffer_time=2.745 print_stall=0 extruder: target=210 temp=208.9 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66673.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68485497 bytes_read=10315248 bytes_retransmit=9 bytes_invalid=0 send_seq=1295252 receive_seq=1295252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=27554 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=126645 bytes_read=391973 bytes_retransmit=0 bytes_invalid=0 send_seq=21083 receive_seq=21083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000309 adj=49999286 sd_pos=4784231 heater_bed: target=60 temp=60.0 pwm=0.009 sysload=0.74 cputime=6029.594 memavail=3270464 print_time=20708.602 buffer_time=3.199 print_stall=0 extruder: target=210 temp=208.9 pwm=0.452
Stats 66674.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68497981 bytes_read=10316540 bytes_retransmit=9 bytes_invalid=0 send_seq=1295467 receive_seq=1295467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=16324 freq=400007596 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=126651 bytes_read=391989 bytes_retransmit=0 bytes_invalid=0 send_seq=21084 receive_seq=21084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000306 adj=49999308 sd_pos=4784231 heater_bed: target=60 temp=60.0 pwm=0.185 sysload=0.74 cputime=6029.645 memavail=3270588 print_time=20708.602 buffer_time=2.198 print_stall=0 extruder: target=210 temp=208.9 pwm=0.452
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66675.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68510875 bytes_read=10317841 bytes_retransmit=9 bytes_invalid=0 send_seq=1295684 receive_seq=1295684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=19677 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=126657 bytes_read=392005 bytes_retransmit=0 bytes_invalid=0 send_seq=21085 receive_seq=21085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000303 adj=49999277 sd_pos=4786827 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.76 cputime=6029.769 memavail=3270588 print_time=20709.998 buffer_time=2.593 print_stall=0 extruder: target=210 temp=209.0 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66676.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68523356 bytes_read=10319123 bytes_retransmit=9 bytes_invalid=0 send_seq=1295900 receive_seq=1295900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=24014 freq=400007587 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=126663 bytes_read=392021 bytes_retransmit=0 bytes_invalid=0 send_seq=21086 receive_seq=21086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000301 adj=49999241 sd_pos=4789142 heater_bed: target=60 temp=60.0 pwm=0.012 sysload=0.76 cputime=6029.893 memavail=3269616 print_time=20711.299 buffer_time=2.894 print_stall=0 extruder: target=210 temp=209.3 pwm=0.427
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66677.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68535606 bytes_read=10320405 bytes_retransmit=9 bytes_invalid=0 send_seq=1296113 receive_seq=1296113 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=27081 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126669 bytes_read=392050 bytes_retransmit=0 bytes_invalid=0 send_seq=21087 receive_seq=21087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000305 adj=49999270 sd_pos=4791357 heater_bed: target=60 temp=60.0 pwm=0.152 sysload=0.76 cputime=6030.093 memavail=3269616 print_time=20712.608 buffer_time=3.183 print_stall=0 extruder: target=210 temp=209.7 pwm=0.355
Stats 66678.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68548028 bytes_read=10321697 bytes_retransmit=9 bytes_invalid=0 send_seq=1296325 receive_seq=1296325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=15856 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126675 bytes_read=392066 bytes_retransmit=0 bytes_invalid=0 send_seq=21088 receive_seq=21088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000302 adj=49999287 sd_pos=4791357 heater_bed: target=60 temp=60.0 pwm=0.080 sysload=0.76 cputime=6030.145 memavail=3269616 print_time=20712.608 buffer_time=2.182 print_stall=0 extruder: target=210 temp=210.2 pwm=0.302
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66679.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68561044 bytes_read=10322999 bytes_retransmit=9 bytes_invalid=0 send_seq=1296545 receive_seq=1296545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=19391 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126681 bytes_read=392082 bytes_retransmit=0 bytes_invalid=0 send_seq=21089 receive_seq=21089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000300 adj=49999273 sd_pos=4793807 heater_bed: target=60 temp=60.0 pwm=0.161 sysload=0.76 cputime=6030.265 memavail=3269616 print_time=20714.010 buffer_time=2.584 print_stall=0 extruder: target=210 temp=210.7 pwm=0.234
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66680.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68573225 bytes_read=10324253 bytes_retransmit=9 bytes_invalid=0 send_seq=1296753 receive_seq=1296753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=26084 freq=400007602 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126687 bytes_read=392098 bytes_retransmit=0 bytes_invalid=0 send_seq=21090 receive_seq=21090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000297 adj=49999256 sd_pos=4796249 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.86 cputime=6030.383 memavail=3268388 print_time=20715.560 buffer_time=3.133 print_stall=0 extruder: target=210 temp=211.0 pwm=0.234
Stats 66681.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68585298 bytes_read=10325496 bytes_retransmit=9 bytes_invalid=0 send_seq=1296959 receive_seq=1296959 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=15154 freq=400007638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=126693 bytes_read=392114 bytes_retransmit=0 bytes_invalid=0 send_seq=21091 receive_seq=21091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000294 adj=49999270 sd_pos=4796249 heater_bed: target=60 temp=60.0 pwm=0.087 sysload=0.86 cputime=6030.433 memavail=3268388 print_time=20715.560 buffer_time=2.132 print_stall=0 extruder: target=210 temp=211.2 pwm=0.234
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66682.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68597398 bytes_read=10326738 bytes_retransmit=9 bytes_invalid=0 send_seq=1297167 receive_seq=1297167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=21886 freq=400007637 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126699 bytes_read=392143 bytes_retransmit=0 bytes_invalid=0 send_seq=21092 receive_seq=21092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000291 adj=49999204 sd_pos=4798738 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.86 cputime=6030.556 memavail=3268388 print_time=20717.107 buffer_time=2.679 print_stall=0 extruder: target=210 temp=211.3 pwm=0.234
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66683.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68610337 bytes_read=10328095 bytes_retransmit=9 bytes_invalid=0 send_seq=1297390 receive_seq=1297389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=25964 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126705 bytes_read=392159 bytes_retransmit=0 bytes_invalid=0 send_seq=21093 receive_seq=21093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000294 adj=49999184 sd_pos=4801203 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.86 cputime=6030.774 memavail=3268388 print_time=20718.528 buffer_time=3.100 print_stall=0 extruder: target=210 temp=211.2 pwm=0.280
Stats 66684.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68622886 bytes_read=10329377 bytes_retransmit=9 bytes_invalid=0 send_seq=1297605 receive_seq=1297605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=14643 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126711 bytes_read=392175 bytes_retransmit=0 bytes_invalid=0 send_seq=21094 receive_seq=21094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000292 adj=49999265 sd_pos=4801203 heater_bed: target=60 temp=60.0 pwm=0.064 sysload=0.86 cputime=6030.824 memavail=3268388 print_time=20718.528 buffer_time=2.099 print_stall=0 extruder: target=210 temp=211.1 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66685.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68635303 bytes_read=10330654 bytes_retransmit=9 bytes_invalid=0 send_seq=1297820 receive_seq=1297820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18528 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126717 bytes_read=392191 bytes_retransmit=0 bytes_invalid=0 send_seq=21095 receive_seq=21095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000290 adj=49999259 sd_pos=4803776 heater_bed: target=60 temp=60.0 pwm=0.174 sysload=0.79 cputime=6030.945 memavail=3268388 print_time=20719.915 buffer_time=2.484 print_stall=0 extruder: target=210 temp=210.8 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66686.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68647800 bytes_read=10331950 bytes_retransmit=9 bytes_invalid=0 send_seq=1298033 receive_seq=1298033 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=21315 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=126723 bytes_read=392207 bytes_retransmit=0 bytes_invalid=0 send_seq=21096 receive_seq=21096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000289 adj=49999235 sd_pos=4806096 heater_bed: target=60 temp=60.0 pwm=0.019 sysload=0.79 cputime=6031.061 memavail=3268388 print_time=20721.224 buffer_time=2.792 print_stall=0 extruder: target=210 temp=210.4 pwm=0.336
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66687.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68659657 bytes_read=10333192 bytes_retransmit=9 bytes_invalid=0 send_seq=1298241 receive_seq=1298241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=25877 freq=400007616 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126729 bytes_read=392236 bytes_retransmit=0 bytes_invalid=0 send_seq=21097 receive_seq=21097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000288 adj=49999252 sd_pos=4808535 heater_bed: target=60 temp=60.0 pwm=0.173 sysload=0.79 cputime=6031.183 memavail=3268388 print_time=20722.559 buffer_time=3.126 print_stall=0 extruder: target=210 temp=210.2 pwm=0.394
Stats 66688.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68671710 bytes_read=10334455 bytes_retransmit=9 bytes_invalid=0 send_seq=1298450 receive_seq=1298450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=14982 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126735 bytes_read=392252 bytes_retransmit=0 bytes_invalid=0 send_seq=21098 receive_seq=21098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000287 adj=49999271 sd_pos=4808535 heater_bed: target=60 temp=60.0 pwm=0.220 sysload=0.79 cputime=6031.242 memavail=3268388 print_time=20722.559 buffer_time=2.125 print_stall=0 extruder: target=210 temp=209.9 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66689.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68684103 bytes_read=10335751 bytes_retransmit=9 bytes_invalid=0 send_seq=1298663 receive_seq=1298663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=19309 freq=400007607 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126741 bytes_read=392268 bytes_retransmit=0 bytes_invalid=0 send_seq=21099 receive_seq=21099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000285 adj=49999272 sd_pos=4811112 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.79 cputime=6031.410 memavail=3268388 print_time=20723.957 buffer_time=2.523 print_stall=0 extruder: target=210 temp=209.7 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66690.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68696708 bytes_read=10337048 bytes_retransmit=9 bytes_invalid=0 send_seq=1298882 receive_seq=1298882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=14821 freq=400007601 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126747 bytes_read=392284 bytes_retransmit=0 bytes_invalid=0 send_seq=21100 receive_seq=21100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000286 adj=49999252 sd_pos=4812291 heater_bed: target=60 temp=60.0 pwm=0.103 sysload=0.89 cputime=6031.493 memavail=3268400 print_time=20724.704 buffer_time=2.269 print_stall=0 extruder: target=210 temp=209.7 pwm=0.394
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66691.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68708798 bytes_read=10338295 bytes_retransmit=9 bytes_invalid=0 send_seq=1299092 receive_seq=1299092 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=9295 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126753 bytes_read=392300 bytes_retransmit=0 bytes_invalid=0 send_seq=21101 receive_seq=21101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000285 adj=49999280 sd_pos=4815211 heater_bed: target=60 temp=60.0 pwm=0.179 sysload=0.89 cputime=6031.577 memavail=3268400 print_time=20725.637 buffer_time=2.201 print_stall=0 extruder: target=210 temp=209.7 pwm=0.398
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66692.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68719231 bytes_read=10339440 bytes_retransmit=9 bytes_invalid=0 send_seq=1299275 receive_seq=1299275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=4323 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=126759 bytes_read=392329 bytes_retransmit=0 bytes_invalid=0 send_seq=21102 receive_seq=21102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000281 adj=49999260 sd_pos=4816626 heater_bed: target=60 temp=60.0 pwm=0.105 sysload=0.89 cputime=6031.719 memavail=3266132 print_time=20726.474 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.8 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66693.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68726827 bytes_read=10340333 bytes_retransmit=9 bytes_invalid=0 send_seq=1299410 receive_seq=1299410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1747 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=126765 bytes_read=392345 bytes_retransmit=0 bytes_invalid=0 send_seq=21103 receive_seq=21103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000278 adj=49999235 sd_pos=4816915 heater_bed: target=60 temp=60.0 pwm=0.273 sysload=0.89 cputime=6031.960 memavail=3265628 print_time=20727.661 buffer_time=2.223 print_stall=0 extruder: target=210 temp=209.9 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66694.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68732926 bytes_read=10341095 bytes_retransmit=9 bytes_invalid=0 send_seq=1299522 receive_seq=1299522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=1581 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=126771 bytes_read=392361 bytes_retransmit=0 bytes_invalid=0 send_seq=21104 receive_seq=21104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000277 adj=49999215 sd_pos=4819368 heater_bed: target=60 temp=60.0 pwm=0.154 sysload=0.89 cputime=6032.097 memavail=3265628 print_time=20728.521 buffer_time=2.082 print_stall=0 extruder: target=210 temp=210.2 pwm=0.284
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66695.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68736633 bytes_read=10341661 bytes_retransmit=9 bytes_invalid=0 send_seq=1299589 receive_seq=1299589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=3706 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=126777 bytes_read=392377 bytes_retransmit=0 bytes_invalid=0 send_seq=21105 receive_seq=21105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000279 adj=49999199 sd_pos=4821380 heater_bed: target=60 temp=60.0 pwm=0.315 sysload=0.82 cputime=6032.317 memavail=3265388 print_time=20729.601 buffer_time=2.162 print_stall=0 extruder: target=210 temp=210.4 pwm=0.284
Stats 66696.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68743153 bytes_read=10342458 bytes_retransmit=9 bytes_invalid=0 send_seq=1299708 receive_seq=1299708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=916 freq=400007617 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=126783 bytes_read=392393 bytes_retransmit=0 bytes_invalid=0 send_seq=21106 receive_seq=21106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000276 adj=49999224 sd_pos=4821468 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.82 cputime=6032.535 memavail=3264900 print_time=20730.602 buffer_time=2.162 print_stall=0 extruder: target=210 temp=210.2 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66697.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68749254 bytes_read=10343215 bytes_retransmit=9 bytes_invalid=0 send_seq=1299819 receive_seq=1299819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=7119 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126789 bytes_read=392422 bytes_retransmit=0 bytes_invalid=0 send_seq=21107 receive_seq=21107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000273 adj=49999228 sd_pos=4823504 heater_bed: target=60 temp=60.0 pwm=0.247 sysload=0.82 cputime=6032.648 memavail=3264900 print_time=20731.899 buffer_time=2.458 print_stall=0 extruder: target=210 temp=210.1 pwm=0.345
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66698.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68753024 bytes_read=10343822 bytes_retransmit=9 bytes_invalid=0 send_seq=1299891 receive_seq=1299891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=18934 freq=400007755 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126795 bytes_read=392438 bytes_retransmit=0 bytes_invalid=0 send_seq=21108 receive_seq=21108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000271 adj=49999141 sd_pos=4826123 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.82 cputime=6032.751 memavail=3264900 print_time=20733.380 buffer_time=2.939 print_stall=0 extruder: target=210 temp=209.7 pwm=0.399
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66699.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68761967 bytes_read=10344824 bytes_retransmit=9 bytes_invalid=0 send_seq=1300051 receive_seq=1300051 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=24501 freq=400007750 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126801 bytes_read=392454 bytes_retransmit=0 bytes_invalid=0 send_seq=21109 receive_seq=21109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000269 adj=49999096 sd_pos=4828427 heater_bed: target=60 temp=60.0 pwm=0.221 sysload=0.82 cputime=6032.862 memavail=3265640 print_time=20734.748 buffer_time=3.301 print_stall=0 extruder: target=210 temp=209.4 pwm=0.450
Stats 66700.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68773296 bytes_read=10346021 bytes_retransmit=9 bytes_invalid=0 send_seq=1300250 receive_seq=1300250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=14340 freq=400007822 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126807 bytes_read=392470 bytes_retransmit=0 bytes_invalid=0 send_seq=21110 receive_seq=21110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000268 adj=49999144 sd_pos=4828427 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.83 cputime=6032.921 memavail=3265164 print_time=20734.748 buffer_time=2.301 print_stall=0 extruder: target=210 temp=209.0 pwm=0.513
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66701.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68784612 bytes_read=10347242 bytes_retransmit=9 bytes_invalid=0 send_seq=1300448 receive_seq=1300448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=18625 freq=400007955 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126813 bytes_read=392486 bytes_retransmit=0 bytes_invalid=0 send_seq=21111 receive_seq=21111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000269 adj=49999057 sd_pos=4830890 heater_bed: target=60 temp=60.0 pwm=0.162 sysload=0.83 cputime=6033.112 memavail=3265164 print_time=20736.138 buffer_time=2.690 print_stall=0 extruder: target=210 temp=208.6 pwm=0.513
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66702.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68795724 bytes_read=10348410 bytes_retransmit=9 bytes_invalid=0 send_seq=1300642 receive_seq=1300642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=20727 freq=400007920 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126819 bytes_read=392515 bytes_retransmit=0 bytes_invalid=0 send_seq=21112 receive_seq=21112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000268 adj=49998897 sd_pos=4832996 heater_bed: target=60 temp=60.0 pwm=0.112 sysload=0.83 cputime=6033.225 memavail=3264912 print_time=20737.394 buffer_time=2.945 print_stall=0 extruder: target=210 temp=208.5 pwm=0.513
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66703.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68807219 bytes_read=10349638 bytes_retransmit=9 bytes_invalid=0 send_seq=1300839 receive_seq=1300839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=25012 freq=400007958 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126831 bytes_read=392547 bytes_retransmit=0 bytes_invalid=0 send_seq=21114 receive_seq=21114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000277 adj=49999022 sd_pos=4835327 heater_bed: target=60 temp=60.0 pwm=0.182 sysload=0.83 cputime=6033.343 memavail=3264912 print_time=20738.836 buffer_time=3.375 print_stall=0 extruder: target=210 temp=208.7 pwm=0.434
Stats 66704.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68818659 bytes_read=10350829 bytes_retransmit=9 bytes_invalid=0 send_seq=1301034 receive_seq=1301034 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=14675 freq=400007932 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126837 bytes_read=392563 bytes_retransmit=0 bytes_invalid=0 send_seq=21115 receive_seq=21115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000274 adj=49999136 sd_pos=4835327 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.83 cputime=6033.393 memavail=3264912 print_time=20738.836 buffer_time=2.374 print_stall=0 extruder: target=210 temp=209.1 pwm=0.369
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66705.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68829272 bytes_read=10351941 bytes_retransmit=9 bytes_invalid=0 send_seq=1301216 receive_seq=1301216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=20851 freq=400007920 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126843 bytes_read=392579 bytes_retransmit=0 bytes_invalid=0 send_seq=21116 receive_seq=21116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000272 adj=49999139 sd_pos=4837766 heater_bed: target=60 temp=60.0 pwm=0.369 sysload=0.77 cputime=6033.508 memavail=3264912 print_time=20740.362 buffer_time=2.900 print_stall=0 extruder: target=210 temp=209.6 pwm=0.310
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66706.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68840544 bytes_read=10353133 bytes_retransmit=9 bytes_invalid=0 send_seq=1301411 receive_seq=1301411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=9 upcoming_bytes=26532 freq=400007911 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126849 bytes_read=392595 bytes_retransmit=0 bytes_invalid=0 send_seq=21117 receive_seq=21117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000270 adj=49999133 sd_pos=4840429 heater_bed: target=60 temp=60.0 pwm=0.110 sysload=0.77 cputime=6033.689 memavail=3264912 print_time=20741.851 buffer_time=3.377 print_stall=0 extruder: target=210 temp=210.1 pwm=0.255
Stats 66707.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68851873 bytes_read=10354339 bytes_retransmit=9 bytes_invalid=0 send_seq=1301609 receive_seq=1301609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=54 upcoming_bytes=16296 freq=400007898 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126855 bytes_read=392624 bytes_retransmit=0 bytes_invalid=0 send_seq=21118 receive_seq=21118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000268 adj=49999180 sd_pos=4840429 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.77 cputime=6033.739 memavail=3264912 print_time=20741.851 buffer_time=2.377 print_stall=0 extruder: target=210 temp=210.7 pwm=0.255
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66708.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68863566 bytes_read=10355577 bytes_retransmit=9 bytes_invalid=0 send_seq=1301813 receive_seq=1301813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=21493 freq=400007864 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126861 bytes_read=392640 bytes_retransmit=0 bytes_invalid=0 send_seq=21119 receive_seq=21119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000269 adj=49999174 sd_pos=4843396 heater_bed: target=60 temp=60.0 pwm=0.293 sysload=0.77 cputime=6033.859 memavail=3264912 print_time=20743.380 buffer_time=2.906 print_stall=0 extruder: target=210 temp=211.1 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66709.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68875290 bytes_read=10356804 bytes_retransmit=9 bytes_invalid=0 send_seq=1302015 receive_seq=1302015 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=23748 freq=400007856 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126867 bytes_read=392656 bytes_retransmit=0 bytes_invalid=0 send_seq=21120 receive_seq=21120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000267 adj=49999225 sd_pos=4845616 heater_bed: target=60 temp=60.0 pwm=0.122 sysload=0.77 cputime=6033.969 memavail=3264912 print_time=20744.661 buffer_time=3.186 print_stall=0 extruder: target=210 temp=211.4 pwm=0.202
Stats 66710.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68886856 bytes_read=10358020 bytes_retransmit=9 bytes_invalid=0 send_seq=1302215 receive_seq=1302215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=52 upcoming_bytes=13321 freq=400007828 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126873 bytes_read=392672 bytes_retransmit=0 bytes_invalid=0 send_seq=21121 receive_seq=21121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000266 adj=49999238 sd_pos=4845616 heater_bed: target=60 temp=60.0 pwm=0.093 sysload=1.03 cputime=6034.019 memavail=3264168 print_time=20744.661 buffer_time=2.185 print_stall=0 extruder: target=210 temp=211.6 pwm=0.202
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66711.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68898128 bytes_read=10359212 bytes_retransmit=9 bytes_invalid=0 send_seq=1302413 receive_seq=1302413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=17349 freq=400007808 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126879 bytes_read=392688 bytes_retransmit=0 bytes_invalid=0 send_seq=21122 receive_seq=21122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000266 adj=49999256 sd_pos=4847831 heater_bed: target=60 temp=60.0 pwm=0.234 sysload=1.03 cputime=6034.142 memavail=3264168 print_time=20746.076 buffer_time=2.600 print_stall=0 extruder: target=210 temp=211.4 pwm=0.264
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66712.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=68909336 bytes_read=10360408 bytes_retransmit=9 bytes_invalid=0 send_seq=1302609 receive_seq=1302609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=22258 freq=400007790 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126885 bytes_read=392717 bytes_retransmit=0 bytes_invalid=0 send_seq=21123 receive_seq=21123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000265 adj=49999282 sd_pos=4850472 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=1.03 cputime=6034.331 memavail=3264168 print_time=20747.521 buffer_time=3.044 print_stall=0 extruder: target=210 temp=211.2 pwm=0.264
Stats 66713.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68920113 bytes_read=10361582 bytes_retransmit=9 bytes_invalid=0 send_seq=1302798 receive_seq=1302798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=53 upcoming_bytes=12599 freq=400007758 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126891 bytes_read=392733 bytes_retransmit=0 bytes_invalid=0 send_seq=21124 receive_seq=21124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000262 adj=49999293 sd_pos=4850472 heater_bed: target=60 temp=60.0 pwm=0.339 sysload=1.03 cputime=6034.380 memavail=3264168 print_time=20747.521 buffer_time=2.044 print_stall=0 extruder: target=210 temp=210.8 pwm=0.322
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66714.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68931613 bytes_read=10362789 bytes_retransmit=9 bytes_invalid=0 send_seq=1302999 receive_seq=1302999 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=16416 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126897 bytes_read=392749 bytes_retransmit=0 bytes_invalid=0 send_seq=21125 receive_seq=21125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000259 adj=49999306 sd_pos=4852953 heater_bed: target=60 temp=60.0 pwm=0.015 sysload=1.03 cputime=6034.500 memavail=3264168 print_time=20748.926 buffer_time=2.449 print_stall=0 extruder: target=210 temp=210.4 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66715.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68943339 bytes_read=10364031 bytes_retransmit=9 bytes_invalid=0 send_seq=1303204 receive_seq=1303204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=29 upcoming_bytes=21366 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126903 bytes_read=392765 bytes_retransmit=0 bytes_invalid=0 send_seq=21126 receive_seq=21126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000262 adj=49999296 sd_pos=4855521 heater_bed: target=60 temp=60.0 pwm=0.076 sysload=0.94 cputime=6034.620 memavail=3264168 print_time=20750.437 buffer_time=2.959 print_stall=0 extruder: target=210 temp=210.0 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66716.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68954430 bytes_read=10365212 bytes_retransmit=9 bytes_invalid=0 send_seq=1303397 receive_seq=1303397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=45 upcoming_bytes=22516 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=126909 bytes_read=392781 bytes_retransmit=0 bytes_invalid=0 send_seq=21127 receive_seq=21127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000260 adj=49999353 sd_pos=4857344 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.94 cputime=6034.714 memavail=3264168 print_time=20751.525 buffer_time=3.043 print_stall=0 extruder: target=210 temp=209.7 pwm=0.432
Stats 66717.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68965943 bytes_read=10366419 bytes_retransmit=9 bytes_invalid=0 send_seq=1303598 receive_seq=1303598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=12189 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126915 bytes_read=392810 bytes_retransmit=0 bytes_invalid=0 send_seq=21128 receive_seq=21128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000267 adj=49999335 sd_pos=4857344 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.94 cputime=6034.777 memavail=3264168 print_time=20751.525 buffer_time=2.043 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66718.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68977438 bytes_read=10367657 bytes_retransmit=9 bytes_invalid=0 send_seq=1303799 receive_seq=1303799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=9443 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126921 bytes_read=392826 bytes_retransmit=0 bytes_invalid=0 send_seq=21129 receive_seq=21129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000267 adj=49999414 sd_pos=4859476 heater_bed: target=60 temp=60.0 pwm=0.194 sysload=0.94 cputime=6034.946 memavail=3264168 print_time=20752.547 buffer_time=2.064 print_stall=0 extruder: target=210 temp=209.5 pwm=0.432
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66719.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68988421 bytes_read=10368828 bytes_retransmit=9 bytes_invalid=0 send_seq=1303990 receive_seq=1303990 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=5952 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126927 bytes_read=392842 bytes_retransmit=0 bytes_invalid=0 send_seq=21130 receive_seq=21130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000272 adj=49999426 sd_pos=4862497 heater_bed: target=60 temp=60.0 pwm=0.116 sysload=0.94 cputime=6035.186 memavail=3264168 print_time=20753.660 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.7 pwm=0.378
Stats 66720.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=68996481 bytes_read=10369745 bytes_retransmit=9 bytes_invalid=0 send_seq=1304133 receive_seq=1304133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=1832 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126933 bytes_read=392858 bytes_retransmit=0 bytes_invalid=0 send_seq=21131 receive_seq=21131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000274 adj=49999381 sd_pos=4862497 heater_bed: target=60 temp=60.0 pwm=0.047 sysload=1.03 cputime=6035.459 memavail=3263676 print_time=20754.660 buffer_time=2.152 print_stall=0 extruder: target=210 temp=209.8 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66721.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69003388 bytes_read=10370577 bytes_retransmit=9 bytes_invalid=0 send_seq=1304256 receive_seq=1304256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=1115 freq=400007737 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126939 bytes_read=392874 bytes_retransmit=0 bytes_invalid=0 send_seq=21132 receive_seq=21132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000270 adj=49999399 sd_pos=4864824 heater_bed: target=60 temp=60.0 pwm=0.310 sysload=1.03 cputime=6035.570 memavail=3263676 print_time=20755.670 buffer_time=2.161 print_stall=0 extruder: target=210 temp=210.1 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66722.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69006908 bytes_read=10371138 bytes_retransmit=9 bytes_invalid=0 send_seq=1304325 receive_seq=1304325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=57 upcoming_bytes=3775 freq=400007717 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126945 bytes_read=392903 bytes_retransmit=0 bytes_invalid=0 send_seq=21133 receive_seq=21133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000265 adj=49999346 sd_pos=4867220 heater_bed: target=60 temp=60.0 pwm=0.129 sysload=1.03 cputime=6035.699 memavail=3263676 print_time=20756.757 buffer_time=2.247 print_stall=0 extruder: target=210 temp=210.4 pwm=0.255
Stats 66723.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69012870 bytes_read=10371902 bytes_retransmit=9 bytes_invalid=0 send_seq=1304432 receive_seq=1304432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=1680 freq=400007699 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126951 bytes_read=392919 bytes_retransmit=0 bytes_invalid=0 send_seq=21134 receive_seq=21134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000262 adj=49999313 sd_pos=4867267 heater_bed: target=60 temp=60.0 pwm=0.141 sysload=1.03 cputime=6035.916 memavail=3263676 print_time=20757.758 buffer_time=2.208 print_stall=0 extruder: target=210 temp=210.5 pwm=0.255
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66724.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69019429 bytes_read=10372702 bytes_retransmit=9 bytes_invalid=0 send_seq=1304549 receive_seq=1304549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=11556 freq=400007711 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126957 bytes_read=392935 bytes_retransmit=0 bytes_invalid=0 send_seq=21135 receive_seq=21135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000257 adj=49999293 sd_pos=4869761 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=1.03 cputime=6036.089 memavail=3266296 print_time=20759.595 buffer_time=3.044 print_stall=0 extruder: target=210 temp=210.5 pwm=0.311
Stats 66725.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69023163 bytes_read=10373244 bytes_retransmit=9 bytes_invalid=0 send_seq=1304617 receive_seq=1304617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=8318 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126963 bytes_read=392951 bytes_retransmit=0 bytes_invalid=0 send_seq=21136 receive_seq=21136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000261 adj=49999244 sd_pos=4869761 heater_bed: target=60 temp=60.0 pwm=0.107 sysload=0.95 cputime=6036.142 memavail=3265548 print_time=20759.595 buffer_time=2.044 print_stall=0 extruder: target=210 temp=210.1 pwm=0.391
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66726.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69030443 bytes_read=10374111 bytes_retransmit=9 bytes_invalid=0 send_seq=1304747 receive_seq=1304747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=38 upcoming_bytes=17538 freq=400007683 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=126969 bytes_read=392967 bytes_retransmit=0 bytes_invalid=0 send_seq=21137 receive_seq=21137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000259 adj=49999302 sd_pos=4872108 heater_bed: target=60 temp=60.0 pwm=0.212 sysload=0.95 cputime=6036.309 memavail=3265548 print_time=20761.100 buffer_time=2.548 print_stall=0 extruder: target=210 temp=209.7 pwm=0.391
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66727.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69041808 bytes_read=10375317 bytes_retransmit=9 bytes_invalid=0 send_seq=1304945 receive_seq=1304945 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=23616 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126975 bytes_read=392996 bytes_retransmit=0 bytes_invalid=0 send_seq=21138 receive_seq=21138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000258 adj=49999290 sd_pos=4874452 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.95 cputime=6036.424 memavail=3265548 print_time=20762.647 buffer_time=3.093 print_stall=0 extruder: target=210 temp=209.2 pwm=0.501
Stats 66728.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69053241 bytes_read=10376535 bytes_retransmit=9 bytes_invalid=0 send_seq=1305145 receive_seq=1305145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=13356 freq=400007668 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126981 bytes_read=393012 bytes_retransmit=0 bytes_invalid=0 send_seq=21139 receive_seq=21139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000255 adj=49999273 sd_pos=4874452 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.95 cputime=6036.473 memavail=3265548 print_time=20762.647 buffer_time=2.093 print_stall=0 extruder: target=210 temp=208.8 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66729.1: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69064997 bytes_read=10377767 bytes_retransmit=9 bytes_invalid=0 send_seq=1305348 receive_seq=1305348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=33 upcoming_bytes=18030 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126987 bytes_read=393028 bytes_retransmit=0 bytes_invalid=0 send_seq=21140 receive_seq=21140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000253 adj=49999271 sd_pos=4876859 heater_bed: target=60 temp=60.0 pwm=0.175 sysload=0.95 cputime=6036.594 memavail=3265548 print_time=20764.141 buffer_time=2.587 print_stall=0 extruder: target=210 temp=208.5 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66730.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69076677 bytes_read=10378993 bytes_retransmit=9 bytes_invalid=0 send_seq=1305550 receive_seq=1305550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=10257 freq=400007632 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126993 bytes_read=393044 bytes_retransmit=0 bytes_invalid=0 send_seq=21141 receive_seq=21141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000251 adj=49999273 sd_pos=4877251 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.95 cputime=6036.768 memavail=3266812 print_time=20764.672 buffer_time=2.117 print_stall=0 extruder: target=210 temp=208.4 pwm=0.501
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66731.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69087863 bytes_read=10380175 bytes_retransmit=9 bytes_invalid=0 send_seq=1305746 receive_seq=1305746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=21224 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=126999 bytes_read=393060 bytes_retransmit=0 bytes_invalid=0 send_seq=21142 receive_seq=21142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000250 adj=49999280 sd_pos=4880746 heater_bed: target=60 temp=60.0 pwm=0.166 sysload=0.95 cputime=6037.026 memavail=3266812 print_time=20766.882 buffer_time=3.327 print_stall=0 extruder: target=210 temp=208.5 pwm=0.501
Stats 66732.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69096799 bytes_read=10381182 bytes_retransmit=9 bytes_invalid=0 send_seq=1305904 receive_seq=1305904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=13259 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127005 bytes_read=393089 bytes_retransmit=0 bytes_invalid=0 send_seq=21143 receive_seq=21143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000246 adj=49999279 sd_pos=4880746 heater_bed: target=60 temp=60.0 pwm=0.165 sysload=0.95 cputime=6037.073 memavail=3266812 print_time=20766.882 buffer_time=2.327 print_stall=0 extruder: target=210 temp=208.8 pwm=0.419
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66733.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69106104 bytes_read=10382209 bytes_retransmit=9 bytes_invalid=0 send_seq=1306063 receive_seq=1306063 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=17768 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127011 bytes_read=393105 bytes_retransmit=0 bytes_invalid=0 send_seq=21144 receive_seq=21144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000243 adj=49999221 sd_pos=4882882 heater_bed: target=60 temp=60.0 pwm=0.026 sysload=0.95 cputime=6037.188 memavail=3266812 print_time=20768.182 buffer_time=2.626 print_stall=0 extruder: target=210 temp=209.5 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66734.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69117488 bytes_read=10383340 bytes_retransmit=9 bytes_invalid=0 send_seq=1306251 receive_seq=1306250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=17014 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127017 bytes_read=393121 bytes_retransmit=0 bytes_invalid=0 send_seq=21145 receive_seq=21145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000239 adj=49999193 sd_pos=4884140 heater_bed: target=60 temp=60.0 pwm=0.207 sysload=0.95 cputime=6037.276 memavail=3266820 print_time=20769.165 buffer_time=2.607 print_stall=0 extruder: target=210 temp=210.0 pwm=0.306
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66735.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69128638 bytes_read=10384522 bytes_retransmit=9 bytes_invalid=0 send_seq=1306443 receive_seq=1306443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=22323 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127023 bytes_read=393137 bytes_retransmit=0 bytes_invalid=0 send_seq=21146 receive_seq=21146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000236 adj=49999123 sd_pos=4886551 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.87 cputime=6037.392 memavail=3266820 print_time=20770.630 buffer_time=3.072 print_stall=0 extruder: target=210 temp=210.5 pwm=0.255
Stats 66736.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69139099 bytes_read=10385648 bytes_retransmit=9 bytes_invalid=0 send_seq=1306625 receive_seq=1306625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=12945 freq=400007663 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127029 bytes_read=393153 bytes_retransmit=0 bytes_invalid=0 send_seq=21147 receive_seq=21147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000242 adj=49999164 sd_pos=4886551 heater_bed: target=60 temp=60.0 pwm=0.057 sysload=0.87 cputime=6037.468 memavail=3266820 print_time=20770.630 buffer_time=2.071 print_stall=0 extruder: target=210 temp=210.9 pwm=0.255
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66737.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69150663 bytes_read=10386860 bytes_retransmit=9 bytes_invalid=0 send_seq=1306827 receive_seq=1306827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=16961 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127035 bytes_read=393182 bytes_retransmit=0 bytes_invalid=0 send_seq=21148 receive_seq=21148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000238 adj=49999227 sd_pos=4888908 heater_bed: target=60 temp=60.0 pwm=0.144 sysload=0.87 cputime=6037.638 memavail=3266332 print_time=20772.041 buffer_time=2.481 print_stall=0 extruder: target=210 temp=211.1 pwm=0.255
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66738.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69162397 bytes_read=10388113 bytes_retransmit=9 bytes_invalid=0 send_seq=1307031 receive_seq=1307031 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=14377 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127041 bytes_read=393198 bytes_retransmit=0 bytes_invalid=0 send_seq=21149 receive_seq=21149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000234 adj=49999194 sd_pos=4890595 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.87 cputime=6037.746 memavail=3266332 print_time=20772.866 buffer_time=2.305 print_stall=0 extruder: target=210 temp=211.3 pwm=0.255
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66739.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69173778 bytes_read=10389324 bytes_retransmit=9 bytes_invalid=0 send_seq=1307230 receive_seq=1307230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=25 upcoming_bytes=18123 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127047 bytes_read=393214 bytes_retransmit=0 bytes_invalid=0 send_seq=21150 receive_seq=21150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000231 adj=49999168 sd_pos=4892940 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.87 cputime=6037.890 memavail=3266092 print_time=20774.310 buffer_time=2.748 print_stall=0 extruder: target=210 temp=211.3 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66740.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69184623 bytes_read=10390466 bytes_retransmit=9 bytes_invalid=0 send_seq=1307418 receive_seq=1307418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=16030 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127053 bytes_read=393230 bytes_retransmit=0 bytes_invalid=0 send_seq=21151 receive_seq=21151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000228 adj=49999187 sd_pos=4894262 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.88 cputime=6037.990 memavail=3265848 print_time=20775.119 buffer_time=2.556 print_stall=0 extruder: target=210 temp=211.1 pwm=0.261
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66741.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69195447 bytes_read=10391588 bytes_retransmit=9 bytes_invalid=0 send_seq=1307599 receive_seq=1307599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10811 freq=400007620 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127059 bytes_read=393246 bytes_retransmit=0 bytes_invalid=0 send_seq=21152 receive_seq=21152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000225 adj=49999175 sd_pos=4894601 heater_bed: target=60 temp=60.0 pwm=0.138 sysload=0.88 cputime=6038.137 memavail=3265848 print_time=20775.857 buffer_time=2.262 print_stall=0 extruder: target=210 temp=210.9 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66742.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69206448 bytes_read=10392764 bytes_retransmit=9 bytes_invalid=0 send_seq=1307791 receive_seq=1307791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=6189 freq=400007666 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127065 bytes_read=393275 bytes_retransmit=0 bytes_invalid=0 send_seq=21153 receive_seq=21153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000225 adj=49999153 sd_pos=4897482 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.88 cputime=6038.304 memavail=3265848 print_time=20776.802 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.7 pwm=0.317
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66743.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69214881 bytes_read=10393727 bytes_retransmit=9 bytes_invalid=0 send_seq=1307940 receive_seq=1307940 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=3375 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127071 bytes_read=393291 bytes_retransmit=0 bytes_invalid=0 send_seq=21154 receive_seq=21154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000226 adj=49999095 sd_pos=4899400 heater_bed: target=60 temp=60.0 pwm=0.172 sysload=0.88 cputime=6038.531 memavail=3265096 print_time=20777.640 buffer_time=2.045 print_stall=0 extruder: target=210 temp=210.4 pwm=0.374
Stats 66744.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69221087 bytes_read=10394503 bytes_retransmit=9 bytes_invalid=0 send_seq=1308052 receive_seq=1308052 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=1117 freq=400007736 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127077 bytes_read=393307 bytes_retransmit=0 bytes_invalid=0 send_seq=21155 receive_seq=21155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000226 adj=49999019 sd_pos=4899446 heater_bed: target=60 temp=60.0 pwm=0.183 sysload=0.88 cputime=6038.740 memavail=3264088 print_time=20778.640 buffer_time=2.044 print_stall=0 extruder: target=210 temp=210.1 pwm=0.374
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66745.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69227436 bytes_read=10395285 bytes_retransmit=9 bytes_invalid=0 send_seq=1308166 receive_seq=1308166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=560 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127083 bytes_read=393323 bytes_retransmit=0 bytes_invalid=0 send_seq=21156 receive_seq=21156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000222 adj=49999052 sd_pos=4901820 heater_bed: target=60 temp=60.0 pwm=0.061 sysload=0.81 cputime=6038.840 memavail=3264088 print_time=20779.622 buffer_time=2.025 print_stall=0 extruder: target=210 temp=209.7 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66746.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69231018 bytes_read=10395832 bytes_retransmit=9 bytes_invalid=0 send_seq=1308235 receive_seq=1308235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=2825 freq=400007704 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127089 bytes_read=393339 bytes_retransmit=0 bytes_invalid=0 send_seq=21157 receive_seq=21157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000223 adj=49999071 sd_pos=4904040 heater_bed: target=60 temp=60.0 pwm=0.075 sysload=0.81 cputime=6038.972 memavail=3264088 print_time=20780.695 buffer_time=2.097 print_stall=0 extruder: target=210 temp=209.6 pwm=0.430
Stats 66747.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69236907 bytes_read=10396584 bytes_retransmit=9 bytes_invalid=0 send_seq=1308342 receive_seq=1308342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=14 upcoming_bytes=628 freq=400007714 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127095 bytes_read=393368 bytes_retransmit=0 bytes_invalid=0 send_seq=21158 receive_seq=21158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000221 adj=49999153 sd_pos=4904128 heater_bed: target=60 temp=60.0 pwm=0.246 sysload=0.81 cputime=6039.177 memavail=3263336 print_time=20781.695 buffer_time=2.097 print_stall=0 extruder: target=210 temp=209.4 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66748.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69242845 bytes_read=10397361 bytes_retransmit=9 bytes_invalid=0 send_seq=1308451 receive_seq=1308451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=2499 freq=400007700 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127101 bytes_read=393384 bytes_retransmit=0 bytes_invalid=0 send_seq=21159 receive_seq=21159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000217 adj=49999128 sd_pos=4905517 heater_bed: target=60 temp=60.0 pwm=0.038 sysload=0.81 cputime=6039.278 memavail=3262584 print_time=20782.630 buffer_time=2.031 print_stall=0 extruder: target=210 temp=209.1 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66749.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69246642 bytes_read=10397923 bytes_retransmit=9 bytes_invalid=0 send_seq=1308523 receive_seq=1308523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=16598 freq=400007687 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127107 bytes_read=393400 bytes_retransmit=0 bytes_invalid=0 send_seq=21160 receive_seq=21160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000214 adj=49999128 sd_pos=4908711 heater_bed: target=60 temp=60.0 pwm=0.113 sysload=0.81 cputime=6039.413 memavail=3262584 print_time=20784.317 buffer_time=2.718 print_stall=0 extruder: target=210 temp=208.9 pwm=0.430
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66750.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69255285 bytes_read=10398860 bytes_retransmit=9 bytes_invalid=0 send_seq=1308667 receive_seq=1308667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=22946 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127113 bytes_read=393416 bytes_retransmit=0 bytes_invalid=0 send_seq=21161 receive_seq=21161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000213 adj=49999169 sd_pos=4911272 heater_bed: target=60 temp=60.0 pwm=0.031 sysload=0.83 cputime=6039.520 memavail=3266516 print_time=20785.747 buffer_time=3.148 print_stall=0 extruder: target=210 temp=208.8 pwm=0.474
Stats 66751.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69266666 bytes_read=10400061 bytes_retransmit=9 bytes_invalid=0 send_seq=1308864 receive_seq=1308864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=31 upcoming_bytes=12667 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127119 bytes_read=393432 bytes_retransmit=0 bytes_invalid=0 send_seq=21162 receive_seq=21162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000213 adj=49999204 sd_pos=4911272 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.83 cputime=6039.568 memavail=3266612 print_time=20785.747 buffer_time=2.147 print_stall=0 extruder: target=210 temp=208.7 pwm=0.474
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66752.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69277755 bytes_read=10401223 bytes_retransmit=9 bytes_invalid=0 send_seq=1309056 receive_seq=1309056 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=17747 freq=400007677 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127125 bytes_read=393448 bytes_retransmit=0 bytes_invalid=0 send_seq=21163 receive_seq=21163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000211 adj=49999210 sd_pos=4913946 heater_bed: target=60 temp=60.0 pwm=0.119 sysload=0.83 cputime=6039.690 memavail=3265352 print_time=20787.221 buffer_time=2.620 print_stall=0 extruder: target=210 temp=208.7 pwm=0.474
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66753.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69288654 bytes_read=10402406 bytes_retransmit=9 bytes_invalid=0 send_seq=1309246 receive_seq=1309246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=13131 freq=400007679 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127131 bytes_read=393477 bytes_retransmit=0 bytes_invalid=0 send_seq=21164 receive_seq=21164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000208 adj=49999185 sd_pos=4914634 heater_bed: target=60 temp=60.0 pwm=0.148 sysload=0.83 cputime=6039.798 memavail=3265360 print_time=20787.800 buffer_time=2.198 print_stall=0 extruder: target=210 temp=208.9 pwm=0.474
Stats 66754.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69300141 bytes_read=10403607 bytes_retransmit=9 bytes_invalid=0 send_seq=1309443 receive_seq=1309443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=5829 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127137 bytes_read=393492 bytes_retransmit=0 bytes_invalid=0 send_seq=21165 receive_seq=21165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000214 adj=49999145 sd_pos=4914634 heater_bed: target=60 temp=60.0 pwm=0.048 sysload=0.83 cputime=6040.070 memavail=3265360 print_time=20788.802 buffer_time=2.200 print_stall=0 extruder: target=210 temp=209.3 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66755.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69311094 bytes_read=10404767 bytes_retransmit=9 bytes_invalid=0 send_seq=1309635 receive_seq=1309635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=26 upcoming_bytes=4740 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127143 bytes_read=393507 bytes_retransmit=0 bytes_invalid=0 send_seq=21166 receive_seq=21166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000210 adj=49999224 sd_pos=4915996 heater_bed: target=60 temp=60.0 pwm=0.108 sysload=0.92 cputime=6040.224 memavail=3265108 print_time=20789.991 buffer_time=2.388 print_stall=0 extruder: target=210 temp=209.7 pwm=0.367
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66756.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69315202 bytes_read=10405381 bytes_retransmit=9 bytes_invalid=0 send_seq=1309715 receive_seq=1309715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=49 upcoming_bytes=18349 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127149 bytes_read=393522 bytes_retransmit=0 bytes_invalid=0 send_seq=21167 receive_seq=21167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000206 adj=49999201 sd_pos=4919047 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.92 cputime=6040.321 memavail=3265108 print_time=20791.646 buffer_time=3.042 print_stall=0 extruder: target=210 temp=210.2 pwm=0.292
Stats 66757.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69321757 bytes_read=10406197 bytes_retransmit=9 bytes_invalid=0 send_seq=1309835 receive_seq=1309835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=12566 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127155 bytes_read=393537 bytes_retransmit=0 bytes_invalid=0 send_seq=21168 receive_seq=21168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000204 adj=49999188 sd_pos=4919047 heater_bed: target=60 temp=60.0 pwm=0.072 sysload=0.92 cputime=6040.359 memavail=3265108 print_time=20791.646 buffer_time=2.041 print_stall=0 extruder: target=210 temp=210.8 pwm=0.232
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66758.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69333333 bytes_read=10407380 bytes_retransmit=9 bytes_invalid=0 send_seq=1310028 receive_seq=1310028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=50 upcoming_bytes=17087 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127161 bytes_read=393565 bytes_retransmit=0 bytes_invalid=0 send_seq=21169 receive_seq=21169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000203 adj=49999179 sd_pos=4921360 heater_bed: target=60 temp=60.0 pwm=0.184 sysload=0.92 cputime=6040.476 memavail=3265108 print_time=20793.146 buffer_time=2.540 print_stall=0 extruder: target=210 temp=211.0 pwm=0.232
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66759.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69345036 bytes_read=10408612 bytes_retransmit=9 bytes_invalid=0 send_seq=1310231 receive_seq=1310231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=17232 freq=400007734 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127167 bytes_read=393580 bytes_retransmit=0 bytes_invalid=0 send_seq=21170 receive_seq=21170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000202 adj=49999121 sd_pos=4923369 heater_bed: target=60 temp=60.0 pwm=0.240 sysload=0.92 cputime=6040.640 memavail=3264132 print_time=20794.180 buffer_time=2.575 print_stall=0 extruder: target=210 temp=211.1 pwm=0.232
Stats 66760.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69356092 bytes_read=10409793 bytes_retransmit=9 bytes_invalid=0 send_seq=1310424 receive_seq=1310424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=46 upcoming_bytes=10220 freq=400007720 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127173 bytes_read=393596 bytes_retransmit=0 bytes_invalid=0 send_seq=21171 receive_seq=21171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000200 adj=49999087 sd_pos=4923369 heater_bed: target=60 temp=60.0 pwm=0.028 sysload=0.85 cputime=6040.803 memavail=3263884 print_time=20794.733 buffer_time=2.127 print_stall=0 extruder: target=210 temp=210.9 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66761.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69367206 bytes_read=10410955 bytes_retransmit=9 bytes_invalid=0 send_seq=1310616 receive_seq=1310616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=10024 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127179 bytes_read=393612 bytes_retransmit=0 bytes_invalid=0 send_seq=21172 receive_seq=21172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000197 adj=49999082 sd_pos=4924578 heater_bed: target=60 temp=60.0 pwm=0.168 sysload=0.85 cputime=6041.036 memavail=3263884 print_time=20796.154 buffer_time=2.547 print_stall=0 extruder: target=210 temp=210.7 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66762.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69375871 bytes_read=10411937 bytes_retransmit=9 bytes_invalid=0 send_seq=1310769 receive_seq=1310769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=9944 freq=400007726 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127185 bytes_read=393628 bytes_retransmit=0 bytes_invalid=0 send_seq=21173 receive_seq=21173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000194 adj=49999114 sd_pos=4926060 heater_bed: target=60 temp=60.0 pwm=0.170 sysload=0.85 cputime=6041.109 memavail=3263884 print_time=20796.998 buffer_time=2.390 print_stall=0 extruder: target=210 temp=210.4 pwm=0.364
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66763.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69381954 bytes_read=10412729 bytes_retransmit=9 bytes_invalid=0 send_seq=1310881 receive_seq=1310881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=8986 freq=400007707 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127191 bytes_read=393657 bytes_retransmit=0 bytes_invalid=0 send_seq=21174 receive_seq=21174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000190 adj=49999059 sd_pos=4928054 heater_bed: target=60 temp=60.0 pwm=0.126 sysload=0.85 cputime=6041.169 memavail=3268348 print_time=20797.674 buffer_time=2.066 print_stall=0 extruder: target=210 temp=210.1 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66764.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69392624 bytes_read=10413856 bytes_retransmit=9 bytes_invalid=0 send_seq=1311066 receive_seq=1311066 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=4858 freq=400007684 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127197 bytes_read=393673 bytes_retransmit=0 bytes_invalid=0 send_seq=21175 receive_seq=21175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000189 adj=49999045 sd_pos=4930347 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.85 cputime=6041.356 memavail=3266480 print_time=20798.765 buffer_time=2.156 print_stall=0 extruder: target=210 temp=209.8 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66765.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69400324 bytes_read=10414779 bytes_retransmit=9 bytes_invalid=0 send_seq=1311205 receive_seq=1311205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=2102 freq=400007654 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127209 bytes_read=393705 bytes_retransmit=0 bytes_invalid=0 send_seq=21177 receive_seq=21177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000186 adj=49999100 sd_pos=4930637 heater_bed: target=60 temp=60.0 pwm=0.104 sysload=0.78 cputime=6041.586 memavail=3265472 print_time=20799.960 buffer_time=2.351 print_stall=0 extruder: target=210 temp=209.6 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66766.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69406382 bytes_read=10415539 bytes_retransmit=9 bytes_invalid=0 send_seq=1311315 receive_seq=1311315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=1787 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127215 bytes_read=393721 bytes_retransmit=0 bytes_invalid=0 send_seq=21178 receive_seq=21178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000188 adj=49999153 sd_pos=4933224 heater_bed: target=60 temp=60.0 pwm=0.202 sysload=0.78 cputime=6041.656 memavail=3265472 print_time=20800.828 buffer_time=2.218 print_stall=0 extruder: target=210 temp=209.4 pwm=0.422
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66767.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=69410156 bytes_read=10416111 bytes_retransmit=9 bytes_invalid=0 send_seq=1311389 receive_seq=1311389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=2946 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=127221 bytes_read=393737 bytes_retransmit=0 bytes_invalid=0 send_seq=21179 receive_seq=21179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000187 adj=49999166 sd_pos=4935182 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.78 cputime=6041.763 memavail=3265220 print_time=20801.657 buffer_time=2.046 print_stall=0 extruder: target=210 temp=209.2 pwm=0.445
Stats 66768.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69416066 bytes_read=10416884 bytes_retransmit=9 bytes_invalid=0 send_seq=1311497 receive_seq=1311497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=44 upcoming_bytes=1140 freq=400007644 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127227 bytes_read=393766 bytes_retransmit=0 bytes_invalid=0 send_seq=21180 receive_seq=21180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000184 adj=49999171 sd_pos=4935284 heater_bed: target=60 temp=60.0 pwm=0.051 sysload=0.78 cputime=6041.976 memavail=3265220 print_time=20802.694 buffer_time=2.083 print_stall=0 extruder: target=210 temp=209.1 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66769.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69422216 bytes_read=10417660 bytes_retransmit=9 bytes_invalid=0 send_seq=1311609 receive_seq=1311609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=332 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127233 bytes_read=393782 bytes_retransmit=0 bytes_invalid=0 send_seq=21181 receive_seq=21181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000181 adj=49999166 sd_pos=4935697 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.78 cputime=6042.196 memavail=3265220 print_time=20803.695 buffer_time=2.083 print_stall=0 extruder: target=210 temp=209.1 pwm=0.445
Stats 66770.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69425978 bytes_read=10418202 bytes_retransmit=9 bytes_invalid=0 send_seq=1311677 receive_seq=1311677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=81 freq=400007626 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127239 bytes_read=393798 bytes_retransmit=0 bytes_invalid=0 send_seq=21182 receive_seq=21182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000179 adj=49999165 sd_pos=4935769 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.80 cputime=6042.396 memavail=3264756 print_time=20804.689 buffer_time=2.076 print_stall=0 extruder: target=210 temp=209.2 pwm=0.445
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66771.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69431239 bytes_read=10418909 bytes_retransmit=9 bytes_invalid=0 send_seq=1311775 receive_seq=1311775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=22 upcoming_bytes=304 freq=400007625 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127245 bytes_read=393814 bytes_retransmit=0 bytes_invalid=0 send_seq=21183 receive_seq=21183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999160 sd_pos=4936076 heater_bed: target=60 temp=59.9 pwm=0.394 sysload=0.80 cputime=6042.570 memavail=3264756 print_time=20805.651 buffer_time=2.037 print_stall=0 extruder: target=210 temp=209.3 pwm=0.423
Stats 66772.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69434790 bytes_read=10419480 bytes_retransmit=9 bytes_invalid=0 send_seq=1311846 receive_seq=1311846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=47 upcoming_bytes=377 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127251 bytes_read=393830 bytes_retransmit=0 bytes_invalid=0 send_seq=21184 receive_seq=21184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999146 sd_pos=4936123 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.80 cputime=6042.773 memavail=3264756 print_time=20806.653 buffer_time=2.038 print_stall=0 extruder: target=210 temp=209.3 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66773.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69440263 bytes_read=10420203 bytes_retransmit=9 bytes_invalid=0 send_seq=1311947 receive_seq=1311947 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=380 freq=400007605 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=127257 bytes_read=393859 bytes_retransmit=0 bytes_invalid=0 send_seq=21185 receive_seq=21185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000178 adj=49999191 sd_pos=4936374 heater_bed: target=60 temp=60.0 pwm=0.099 sysload=0.80 cputime=6043.066 memavail=3264756 print_time=20807.706 buffer_time=2.090 print_stall=0 extruder: target=210 temp=209.3 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66774.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69444047 bytes_read=10420790 bytes_retransmit=9 bytes_invalid=0 send_seq=1312021 receive_seq=1312021 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=48 upcoming_bytes=2026 freq=400007600 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=127263 bytes_read=393875 bytes_retransmit=0 bytes_invalid=0 send_seq=21186 receive_seq=21186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000179 adj=49999205 sd_pos=4936671 heater_bed: target=60 temp=60.0 pwm=0.133 sysload=0.80 cputime=6043.356 memavail=3264756 print_time=20808.652 buffer_time=2.035 print_stall=0 extruder: target=210 temp=209.5 pwm=0.423
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66775.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69449338 bytes_read=10421501 bytes_retransmit=9 bytes_invalid=0 send_seq=1312120 receive_seq=1312120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=15 upcoming_bytes=3794 freq=400007586 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=127269 bytes_read=393891 bytes_retransmit=0 bytes_invalid=0 send_seq=21187 receive_seq=21187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999232 sd_pos=4939118 heater_bed: target=60 temp=60.0 pwm=0.136 sysload=0.81 cputime=6043.562 memavail=3264756 print_time=20809.841 buffer_time=2.224 print_stall=0 extruder: target=210 temp=209.6 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66776.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69455044 bytes_read=10422218 bytes_retransmit=9 bytes_invalid=0 send_seq=1312223 receive_seq=1312223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=37 upcoming_bytes=4688 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=127275 bytes_read=393907 bytes_retransmit=0 bytes_invalid=0 send_seq=21188 receive_seq=21188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999227 sd_pos=4941576 heater_bed: target=60 temp=60.0 pwm=0.260 sysload=0.81 cputime=6043.699 memavail=3264756 print_time=20810.925 buffer_time=2.306 print_stall=0 extruder: target=210 temp=209.6 pwm=0.415
Stats 66777.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69460742 bytes_read=10422950 bytes_retransmit=9 bytes_invalid=0 send_seq=1312327 receive_seq=1312327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=1958 freq=400007594 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=127281 bytes_read=393923 bytes_retransmit=0 bytes_invalid=0 send_seq=21189 receive_seq=21189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999200 sd_pos=4941676 heater_bed: target=60 temp=60.0 pwm=0.106 sysload=0.81 cputime=6043.865 memavail=3264756 print_time=20811.680 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.7 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66778.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69468097 bytes_read=10423842 bytes_retransmit=9 bytes_invalid=0 send_seq=1312459 receive_seq=1312459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=535 freq=400007585 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127287 bytes_read=393952 bytes_retransmit=0 bytes_invalid=0 send_seq=21190 receive_seq=21190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000173 adj=49999180 sd_pos=4943346 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.81 cputime=6043.989 memavail=3264756 print_time=20812.681 buffer_time=2.061 print_stall=0 extruder: target=210 temp=209.6 pwm=0.415
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66779.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69471800 bytes_read=10424374 bytes_retransmit=9 bytes_invalid=0 send_seq=1312522 receive_seq=1312522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=3823 freq=400007570 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127293 bytes_read=393968 bytes_retransmit=0 bytes_invalid=0 send_seq=21191 receive_seq=21191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000172 adj=49999196 sd_pos=4946352 heater_bed: target=60 temp=60.0 pwm=0.285 sysload=0.81 cputime=6044.139 memavail=3264516 print_time=20813.803 buffer_time=2.139 print_stall=0 extruder: target=210 temp=209.6 pwm=0.415
Stats 66780.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69477574 bytes_read=10425120 bytes_retransmit=9 bytes_invalid=0 send_seq=1312628 receive_seq=1312628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=21 upcoming_bytes=1812 freq=400007572 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127299 bytes_read=393984 bytes_retransmit=0 bytes_invalid=0 send_seq=21192 receive_seq=21192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999217 sd_pos=4946352 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.75 cputime=6044.344 memavail=3264024 print_time=20814.803 buffer_time=2.138 print_stall=0 extruder: target=210 temp=209.5 pwm=0.443
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66781.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69484500 bytes_read=10425942 bytes_retransmit=9 bytes_invalid=0 send_seq=1312752 receive_seq=1312752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=42 upcoming_bytes=605 freq=400007555 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127305 bytes_read=394000 bytes_retransmit=0 bytes_invalid=0 send_seq=21193 receive_seq=21193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999238 sd_pos=4946833 heater_bed: target=60 temp=60.0 pwm=0.074 sysload=0.75 cputime=6044.554 memavail=3264024 print_time=20815.829 buffer_time=2.163 print_stall=0 extruder: target=210 temp=209.6 pwm=0.443
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
Stats 66782.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69487952 bytes_read=10426489 bytes_retransmit=9 bytes_invalid=0 send_seq=1312818 receive_seq=1312818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=1253 freq=400007563 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127311 bytes_read=394016 bytes_retransmit=0 bytes_invalid=0 send_seq=21194 receive_seq=21194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000180 adj=49999264 sd_pos=4947012 heater_bed: target=60 temp=60.0 pwm=0.111 sysload=0.75 cputime=6044.780 memavail=3264024 print_time=20816.668 buffer_time=2.001 print_stall=0 extruder: target=210 temp=209.5 pwm=0.443
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66783.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69493231 bytes_read=10427206 bytes_retransmit=9 bytes_invalid=0 send_seq=1312915 receive_seq=1312915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=56 upcoming_bytes=2052 freq=400007560 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127317 bytes_read=394045 bytes_retransmit=0 bytes_invalid=0 send_seq=21195 receive_seq=21195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999317 sd_pos=4947185 heater_bed: target=60 temp=60.0 pwm=0.021 sysload=0.75 cputime=6045.065 memavail=3264024 print_time=20817.775 buffer_time=2.108 print_stall=0 extruder: target=210 temp=209.6 pwm=0.443
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66784.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69498645 bytes_read=10427888 bytes_retransmit=9 bytes_invalid=0 send_seq=1313011 receive_seq=1313011 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=2853 freq=400007562 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127323 bytes_read=394061 bytes_retransmit=0 bytes_invalid=0 send_seq=21196 receive_seq=21196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999263 sd_pos=4947463 heater_bed: target=60 temp=60.0 pwm=0.195 sysload=0.75 cputime=6045.392 memavail=3264024 print_time=20818.871 buffer_time=2.185 print_stall=0 extruder: target=210 temp=209.7 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66785.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69503990 bytes_read=10428590 bytes_retransmit=9 bytes_invalid=0 send_seq=1313108 receive_seq=1313108 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=2066 freq=400007566 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127329 bytes_read=394077 bytes_retransmit=0 bytes_invalid=0 send_seq=21197 receive_seq=21197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000172 adj=49999219 sd_pos=4947714 heater_bed: target=60 temp=60.0 pwm=0.114 sysload=0.69 cputime=6045.708 memavail=3264024 print_time=20819.696 buffer_time=2.010 print_stall=0 extruder: target=210 temp=209.7 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66786.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69509877 bytes_read=10429316 bytes_retransmit=9 bytes_invalid=0 send_seq=1313210 receive_seq=1313210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3139 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127335 bytes_read=394093 bytes_retransmit=0 bytes_invalid=0 send_seq=21198 receive_seq=21198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000171 adj=49999188 sd_pos=4949685 heater_bed: target=60 temp=60.0 pwm=0.155 sysload=0.69 cputime=6045.914 memavail=3263784 print_time=20820.893 buffer_time=2.207 print_stall=0 extruder: target=210 temp=209.9 pwm=0.441
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66787.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69515208 bytes_read=10430006 bytes_retransmit=9 bytes_invalid=0 send_seq=1313308 receive_seq=1313308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=3314 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127341 bytes_read=394109 bytes_retransmit=0 bytes_invalid=0 send_seq=21199 receive_seq=21199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000168 adj=49999076 sd_pos=4952551 heater_bed: target=60 temp=60.0 pwm=0.293 sysload=0.69 cputime=6045.999 memavail=3263784 print_time=20821.757 buffer_time=2.071 print_stall=0 extruder: target=210 temp=210.0 pwm=0.380
Stats 66788.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69520945 bytes_read=10430735 bytes_retransmit=9 bytes_invalid=0 send_seq=1313408 receive_seq=1313408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=1850 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127347 bytes_read=394138 bytes_retransmit=0 bytes_invalid=0 send_seq=21200 receive_seq=21200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000168 adj=49999092 sd_pos=4952551 heater_bed: target=60 temp=60.0 pwm=0.040 sysload=0.69 cputime=6046.199 memavail=3263784 print_time=20822.746 buffer_time=2.059 print_stall=0 extruder: target=210 temp=210.2 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66789.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69527528 bytes_read=10431511 bytes_retransmit=9 bytes_invalid=0 send_seq=1313520 receive_seq=1313520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=1646 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127353 bytes_read=394154 bytes_retransmit=0 bytes_invalid=0 send_seq=21201 receive_seq=21201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000165 adj=49999109 sd_pos=4953814 heater_bed: target=60 temp=60.0 pwm=0.201 sysload=0.69 cputime=6046.343 memavail=3263784 print_time=20823.859 buffer_time=2.170 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66790.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69531617 bytes_read=10432098 bytes_retransmit=9 bytes_invalid=0 send_seq=1313597 receive_seq=1313597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=3675 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127359 bytes_read=394170 bytes_retransmit=0 bytes_invalid=0 send_seq=21202 receive_seq=21202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000167 adj=49999122 sd_pos=4957219 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.63 cputime=6046.492 memavail=3263792 print_time=20824.877 buffer_time=2.177 print_stall=0 extruder: target=210 temp=210.1 pwm=0.380
Stats 66791.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69537260 bytes_read=10432830 bytes_retransmit=9 bytes_invalid=0 send_seq=1313700 receive_seq=1313700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=2265 freq=400007614 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127365 bytes_read=394186 bytes_retransmit=0 bytes_invalid=0 send_seq=21203 receive_seq=21203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000165 adj=49999171 sd_pos=4957320 heater_bed: target=60 temp=60.0 pwm=0.120 sysload=0.63 cputime=6046.711 memavail=3263792 print_time=20825.766 buffer_time=2.065 print_stall=0 extruder: target=210 temp=210.1 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66792.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=69543853 bytes_read=10433626 bytes_retransmit=9 bytes_invalid=0 send_seq=1313818 receive_seq=1313816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2087 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127371 bytes_read=394202 bytes_retransmit=0 bytes_invalid=0 send_seq=21204 receive_seq=21204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000166 adj=49999129 sd_pos=4957700 heater_bed: target=60 temp=60.0 pwm=0.053 sysload=0.63 cputime=6046.946 memavail=3263792 print_time=20827.044 buffer_time=2.335 print_stall=0 extruder: target=210 temp=210.1 pwm=0.428
Stats 66793.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69548438 bytes_read=10434284 bytes_retransmit=9 bytes_invalid=0 send_seq=1313904 receive_seq=1313904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=1405 freq=400007645 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127377 bytes_read=394231 bytes_retransmit=0 bytes_invalid=0 send_seq=21205 receive_seq=21205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000164 adj=49999155 sd_pos=4957746 heater_bed: target=60 temp=60.0 pwm=0.115 sysload=0.63 cputime=6047.170 memavail=3263792 print_time=20827.794 buffer_time=2.085 print_stall=0 extruder: target=210 temp=209.9 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66794.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69553093 bytes_read=10434936 bytes_retransmit=9 bytes_invalid=0 send_seq=1313991 receive_seq=1313991 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=2136 freq=400007630 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127383 bytes_read=394247 bytes_retransmit=0 bytes_invalid=0 send_seq=21206 receive_seq=21206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000167 adj=49999100 sd_pos=4958041 heater_bed: target=60 temp=60.0 pwm=0.102 sysload=0.63 cputime=6047.382 memavail=3263792 print_time=20828.737 buffer_time=2.026 print_stall=0 extruder: target=210 temp=209.8 pwm=0.428
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66795.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69558527 bytes_read=10435647 bytes_retransmit=9 bytes_invalid=0 send_seq=1314090 receive_seq=1314090 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=55 upcoming_bytes=2614 freq=400007643 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127389 bytes_read=394263 bytes_retransmit=0 bytes_invalid=0 send_seq=21207 receive_seq=21207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000185 adj=49999172 sd_pos=4958289 heater_bed: target=60 temp=60.0 pwm=0.254 sysload=0.58 cputime=6047.705 memavail=3263792 print_time=20829.835 buffer_time=2.124 print_stall=0 extruder: target=210 temp=209.9 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66796.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69564176 bytes_read=10436364 bytes_retransmit=9 bytes_invalid=0 send_seq=1314193 receive_seq=1314193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=4273 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127395 bytes_read=394279 bytes_retransmit=0 bytes_invalid=0 send_seq=21208 receive_seq=21208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000182 adj=49999392 sd_pos=4959846 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.58 cputime=6048.001 memavail=3263792 print_time=20831.041 buffer_time=2.329 print_stall=0 extruder: target=210 temp=209.9 pwm=0.434
Stats 66797.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69569725 bytes_read=10437096 bytes_retransmit=9 bytes_invalid=0 send_seq=1314296 receive_seq=1314296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=35 upcoming_bytes=3757 freq=400007610 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=127401 bytes_read=394295 bytes_retransmit=0 bytes_invalid=0 send_seq=21209 receive_seq=21209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000179 adj=49999336 sd_pos=4962660 heater_bed: target=60 temp=60.0 pwm=0.063 sysload=0.58 cputime=6048.070 memavail=3263548 print_time=20831.825 buffer_time=2.113 print_stall=0 extruder: target=210 temp=209.9 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66798.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69575472 bytes_read=10437844 bytes_retransmit=9 bytes_invalid=0 send_seq=1314400 receive_seq=1314400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=17 upcoming_bytes=3597 freq=400007599 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127407 bytes_read=394324 bytes_retransmit=0 bytes_invalid=0 send_seq=21210 receive_seq=21210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000175 adj=49999321 sd_pos=4963261 heater_bed: target=60 temp=60.0 pwm=0.241 sysload=0.58 cputime=6048.290 memavail=3263548 print_time=20832.938 buffer_time=2.206 print_stall=0 extruder: target=210 temp=209.9 pwm=0.434
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66799.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69582349 bytes_read=10438671 bytes_retransmit=9 bytes_invalid=0 send_seq=1314525 receive_seq=1314525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=58 upcoming_bytes=1078 freq=400007606 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127413 bytes_read=394340 bytes_retransmit=0 bytes_invalid=0 send_seq=21211 receive_seq=21211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000172 adj=49999261 sd_pos=4963906 heater_bed: target=60 temp=60.0 pwm=0.000 sysload=0.58 cputime=6048.444 memavail=3263548 print_time=20833.845 buffer_time=2.113 print_stall=0 extruder: target=210 temp=210.0 pwm=0.434
Stats 66800.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69587675 bytes_read=10439392 bytes_retransmit=9 bytes_invalid=0 send_seq=1314623 receive_seq=1314623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=2723 freq=400007609 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127419 bytes_read=394356 bytes_retransmit=0 bytes_invalid=0 send_seq=21212 receive_seq=21212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000170 adj=49999210 sd_pos=4967567 heater_bed: target=60 temp=60.0 pwm=0.147 sysload=0.62 cputime=6048.522 memavail=3263324 print_time=20834.966 buffer_time=2.233 print_stall=0 extruder: target=210 temp=210.1 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66801.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69591739 bytes_read=10439974 bytes_retransmit=9 bytes_invalid=0 send_seq=1314699 receive_seq=1314699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=30 upcoming_bytes=2960 freq=400007608 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127425 bytes_read=394372 bytes_retransmit=0 bytes_invalid=0 send_seq=21213 receive_seq=21213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000166 adj=49999180 sd_pos=4967901 heater_bed: target=60 temp=60.0 pwm=0.083 sysload=0.62 cputime=6048.766 memavail=3263324 print_time=20835.837 buffer_time=2.104 print_stall=0 extruder: target=210 temp=210.1 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66802.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69598299 bytes_read=10440771 bytes_retransmit=9 bytes_invalid=0 send_seq=1314818 receive_seq=1314818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1135 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=127431 bytes_read=394388 bytes_retransmit=0 bytes_invalid=0 send_seq=21214 receive_seq=21214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000162 adj=49999140 sd_pos=4968194 heater_bed: target=60 temp=60.0 pwm=0.130 sysload=0.62 cputime=6048.993 memavail=3263324 print_time=20836.975 buffer_time=2.241 print_stall=0 extruder: target=210 temp=210.2 pwm=0.431
Stats 66803.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69603065 bytes_read=10441463 bytes_retransmit=9 bytes_invalid=0 send_seq=1314907 receive_seq=1314907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=7 upcoming_bytes=0 freq=400007639 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127437 bytes_read=394417 bytes_retransmit=0 bytes_invalid=0 send_seq=21215 receive_seq=21215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000159 adj=49999069 sd_pos=4968194 heater_bed: target=60 temp=60.0 pwm=0.086 sysload=0.62 cputime=6049.181 memavail=3264084 print_time=20837.976 buffer_time=2.207 print_stall=0 extruder: target=210 temp=210.3 pwm=0.431
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66804.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69607414 bytes_read=10442045 bytes_retransmit=9 bytes_invalid=0 send_seq=1314983 receive_seq=1314983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=24 upcoming_bytes=672 freq=400007618 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127443 bytes_read=394433 bytes_retransmit=0 bytes_invalid=0 send_seq=21216 receive_seq=21216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000155 adj=49999052 sd_pos=4969023 heater_bed: target=60 temp=60.0 pwm=0.052 sysload=0.62 cputime=6049.327 memavail=3266800 print_time=20838.911 buffer_time=2.141 print_stall=0 extruder: target=210 temp=210.3 pwm=0.387
Stats 66805.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69611327 bytes_read=10442637 bytes_retransmit=9 bytes_invalid=0 send_seq=1315058 receive_seq=1315058 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=28 upcoming_bytes=609 freq=400007612 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127449 bytes_read=394449 bytes_retransmit=0 bytes_invalid=0 send_seq=21217 receive_seq=21217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000159 adj=49999061 sd_pos=4969113 heater_bed: target=60 temp=60.0 pwm=0.257 sysload=0.57 cputime=6049.534 memavail=3266800 print_time=20839.915 buffer_time=2.144 print_stall=0 extruder: target=210 temp=210.5 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 1500.000000
max_accel_to_decel: 750.000000
square_corner_velocity: 10.000000
Stats 66806.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69616576 bytes_read=10443343 bytes_retransmit=9 bytes_invalid=0 send_seq=1315156 receive_seq=1315156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=400 freq=400007636 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127455 bytes_read=394465 bytes_retransmit=0 bytes_invalid=0 send_seq=21218 receive_seq=21218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000155 adj=49999141 sd_pos=4969476 heater_bed: target=60 temp=60.0 pwm=0.094 sysload=0.57 cputime=6049.699 memavail=3266552 print_time=20840.906 buffer_time=2.135 print_stall=0 extruder: target=210 temp=210.5 pwm=0.387
Stats 66807.4: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69620356 bytes_read=10443910 bytes_retransmit=9 bytes_invalid=0 send_seq=1315229 receive_seq=1315229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=43 upcoming_bytes=186 freq=400007635 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=127461 bytes_read=394481 bytes_retransmit=0 bytes_invalid=0 send_seq=21219 receive_seq=21219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000156 adj=49999069 sd_pos=4969567 heater_bed: target=60 temp=60.0 pwm=0.100 sysload=0.57 cputime=6049.981 memavail=3266552 print_time=20841.907 buffer_time=2.135 print_stall=0 extruder: target=210 temp=210.5 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 9000.000000
max_accel_to_decel: 4500.000000
square_corner_velocity: 10.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 10.000000
Stats 66808.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69625507 bytes_read=10444623 bytes_retransmit=9 bytes_invalid=0 send_seq=1315325 receive_seq=1315325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127467 bytes_read=394510 bytes_retransmit=0 bytes_invalid=0 send_seq=21220 receive_seq=21220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000152 adj=49999110 sd_pos=4969978 heater_bed: target=60 temp=60.0 pwm=0.124 sysload=0.57 cputime=6050.199 memavail=3266552 print_time=20842.830 buffer_time=2.058 print_stall=0 extruder: target=210 temp=210.5 pwm=0.380
Stats 66809.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69629122 bytes_read=10445174 bytes_retransmit=9 bytes_invalid=0 send_seq=1315393 receive_seq=1315393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=39 upcoming_bytes=1150 freq=400007640 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127473 bytes_read=394526 bytes_retransmit=0 bytes_invalid=0 send_seq=21221 receive_seq=21221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000150 adj=49999051 sd_pos=4970301 heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.57 cputime=6050.369 memavail=3267292 print_time=20845.408 buffer_time=3.635 print_stall=0 extruder: target=0 temp=210.4 pwm=0.000
Stats 66810.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69630580 bytes_read=10445516 bytes_retransmit=9 bytes_invalid=0 send_seq=1315421 receive_seq=1315421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007629 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127479 bytes_read=394542 bytes_retransmit=0 bytes_invalid=0 send_seq=21222 receive_seq=21222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000148 adj=49999145 sd_pos=4970301 heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.60 cputime=6050.391 memavail=3266808 print_time=20845.408 buffer_time=2.634 print_stall=0 extruder: target=0 temp=210.4 pwm=0.000
Finished SD card print
Exiting SD card print (position 4982658)
Stats 66811.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69630794 bytes_read=10445818 bytes_retransmit=9 bytes_invalid=0 send_seq=1315438 receive_seq=1315438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127485 bytes_read=394558 bytes_retransmit=0 bytes_invalid=0 send_seq=21223 receive_seq=21223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000146 adj=49999143  heater_bed: target=0 temp=60.0 pwm=0.000 sysload=0.60 cputime=6050.418 memavail=3266808 print_time=20845.508 buffer_time=1.734 print_stall=0 extruder: target=0 temp=210.2 pwm=0.000
Stats 66812.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=69630832 bytes_read=10445935 bytes_retransmit=9 bytes_invalid=0 send_seq=1315439 receive_seq=1315439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=127491 bytes_read=394574 bytes_retransmit=0 bytes_invalid=0 send_seq=21224 receive_seq=21224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000144 adj=49999136  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.60 cputime=6050.433 memavail=3265300 print_time=20845.508 buffer_time=0.733 print_stall=0 extruder: target=0 temp=209.7 pwm=0.000
Stats 66813.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=69630838 bytes_read=10446053 bytes_retransmit=9 bytes_invalid=0 send_seq=1315440 receive_seq=1315440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=127497 bytes_read=394603 bytes_retransmit=0 bytes_invalid=0 send_seq=21225 receive_seq=21225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000148 adj=49999118  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.60 cputime=6050.451 memavail=3265300 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.0 pwm=0.000
Stats 66814.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=69630844 bytes_read=10446171 bytes_retransmit=9 bytes_invalid=0 send_seq=1315441 receive_seq=1315441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007633 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=127503 bytes_read=394619 bytes_retransmit=0 bytes_invalid=0 send_seq=21226 receive_seq=21226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000149 adj=49999142  heater_bed: target=0 temp=59.9 pwm=0.000 sysload=0.60 cputime=6050.468 memavail=3266928 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.4 pwm=0.000
Stats 66815.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=69630850 bytes_read=10446288 bytes_retransmit=9 bytes_invalid=0 send_seq=1315442 receive_seq=1315442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007696 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=127509 bytes_read=394635 bytes_retransmit=0 bytes_invalid=0 send_seq=21227 receive_seq=21227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000150 adj=49999142  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.55 cputime=6050.485 memavail=3267068 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.5 pwm=0.000
Stats 66816.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=69630856 bytes_read=10446391 bytes_retransmit=9 bytes_invalid=0 send_seq=1315443 receive_seq=1315443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007689 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=127515 bytes_read=394651 bytes_retransmit=0 bytes_invalid=0 send_seq=21228 receive_seq=21228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000153 adj=49999083  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.55 cputime=6050.501 memavail=3267068 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.7 pwm=0.000
Stats 66817.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=69630862 bytes_read=10446509 bytes_retransmit=9 bytes_invalid=0 send_seq=1315444 receive_seq=1315444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=127521 bytes_read=394667 bytes_retransmit=0 bytes_invalid=0 send_seq=21229 receive_seq=21229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000158 adj=49999122  heater_bed: target=0 temp=59.8 pwm=0.000 sysload=0.55 cputime=6050.518 memavail=3267068 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.8 pwm=0.000
Stats 66818.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630868 bytes_read=10446640 bytes_retransmit=9 bytes_invalid=0 send_seq=1315445 receive_seq=1315445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127527 bytes_read=394696 bytes_retransmit=0 bytes_invalid=0 send_seq=21230 receive_seq=21230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000157 adj=49999190  heater_bed: target=0 temp=59.7 pwm=0.000 sysload=0.55 cputime=6050.536 memavail=3267068 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.7 pwm=0.000
Stats 66819.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630874 bytes_read=10446742 bytes_retransmit=9 bytes_invalid=0 send_seq=1315446 receive_seq=1315446 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127533 bytes_read=394712 bytes_retransmit=0 bytes_invalid=0 send_seq=21231 receive_seq=21231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000156 adj=49999192  heater_bed: target=0 temp=59.7 pwm=0.000 sysload=0.55 cputime=6050.552 memavail=3267068 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.7 pwm=0.000
Stats 66820.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630880 bytes_read=10446855 bytes_retransmit=9 bytes_invalid=0 send_seq=1315447 receive_seq=1315447 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007660 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127539 bytes_read=394728 bytes_retransmit=0 bytes_invalid=0 send_seq=21232 receive_seq=21232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000156 adj=49999201  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.51 cputime=6050.568 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.8 pwm=0.000
Stats 66821.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630886 bytes_read=10446972 bytes_retransmit=9 bytes_invalid=0 send_seq=1315448 receive_seq=1315448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007661 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127545 bytes_read=394744 bytes_retransmit=0 bytes_invalid=0 send_seq=21233 receive_seq=21233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000179 adj=49999218  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.51 cputime=6050.586 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.4 pwm=0.000
Stats 66822.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630892 bytes_read=10447075 bytes_retransmit=9 bytes_invalid=0 send_seq=1315449 receive_seq=1315449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007659 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127551 bytes_read=394760 bytes_retransmit=0 bytes_invalid=0 send_seq=21234 receive_seq=21234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999569  heater_bed: target=0 temp=59.6 pwm=0.000 sysload=0.51 cputime=6050.602 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.4 pwm=0.000
Stats 66823.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630898 bytes_read=10447207 bytes_retransmit=9 bytes_invalid=0 send_seq=1315450 receive_seq=1315450 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127557 bytes_read=394789 bytes_retransmit=0 bytes_invalid=0 send_seq=21235 receive_seq=21235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999455  heater_bed: target=0 temp=59.5 pwm=0.000 sysload=0.51 cputime=6050.620 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.4 pwm=0.000
Stats 66824.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630904 bytes_read=10447324 bytes_retransmit=9 bytes_invalid=0 send_seq=1315451 receive_seq=1315451 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127563 bytes_read=394805 bytes_retransmit=0 bytes_invalid=0 send_seq=21236 receive_seq=21236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000175 adj=49999415  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.51 cputime=6050.637 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.0 pwm=0.000
Stats 66825.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630910 bytes_read=10447427 bytes_retransmit=9 bytes_invalid=0 send_seq=1315452 receive_seq=1315452 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127569 bytes_read=394821 bytes_retransmit=0 bytes_invalid=0 send_seq=21237 receive_seq=21237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000173 adj=49999302  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.47 cputime=6050.654 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.0 pwm=0.000
Stats 66826.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630916 bytes_read=10447545 bytes_retransmit=9 bytes_invalid=0 send_seq=1315453 receive_seq=1315453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127575 bytes_read=394837 bytes_retransmit=0 bytes_invalid=0 send_seq=21238 receive_seq=21238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000194 adj=49999239  heater_bed: target=0 temp=59.4 pwm=0.000 sysload=0.47 cputime=6050.671 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.0 pwm=0.000
Stats 66827.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630922 bytes_read=10447662 bytes_retransmit=9 bytes_invalid=0 send_seq=1315454 receive_seq=1315454 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127581 bytes_read=394853 bytes_retransmit=0 bytes_invalid=0 send_seq=21239 receive_seq=21239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000190 adj=49999558  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.47 cputime=6050.688 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.6 pwm=0.000
Stats 66828.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630928 bytes_read=10447779 bytes_retransmit=9 bytes_invalid=0 send_seq=1315455 receive_seq=1315455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007698 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=127587 bytes_read=394882 bytes_retransmit=0 bytes_invalid=0 send_seq=21240 receive_seq=21240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000187 adj=49999425  heater_bed: target=0 temp=59.3 pwm=0.000 sysload=0.47 cputime=6050.705 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.5 pwm=0.000
Stats 66829.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630934 bytes_read=10447897 bytes_retransmit=9 bytes_invalid=0 send_seq=1315456 receive_seq=1315456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007712 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=127593 bytes_read=394898 bytes_retransmit=0 bytes_invalid=0 send_seq=21241 receive_seq=21241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000188 adj=49999281  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.47 cputime=6050.722 memavail=3265584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.6 pwm=0.000
Stats 66830.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630940 bytes_read=10448010 bytes_retransmit=9 bytes_invalid=0 send_seq=1315457 receive_seq=1315457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007706 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=127599 bytes_read=394914 bytes_retransmit=0 bytes_invalid=0 send_seq=21242 receive_seq=21242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000184 adj=49999254  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.43 cputime=6050.739 memavail=3265088 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.2 pwm=0.000
Stats 66831.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630946 bytes_read=10448111 bytes_retransmit=9 bytes_invalid=0 send_seq=1315458 receive_seq=1315458 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=127605 bytes_read=394930 bytes_retransmit=0 bytes_invalid=0 send_seq=21243 receive_seq=21243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000180 adj=49999198  heater_bed: target=0 temp=59.2 pwm=0.000 sysload=0.43 cputime=6050.755 memavail=3265088 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.3 pwm=0.000
Stats 66832.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630952 bytes_read=10448229 bytes_retransmit=9 bytes_invalid=0 send_seq=1315459 receive_seq=1315459 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=127611 bytes_read=394946 bytes_retransmit=0 bytes_invalid=0 send_seq=21244 receive_seq=21244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000177 adj=49999152  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.43 cputime=6050.772 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.3 pwm=0.000
Stats 66833.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630958 bytes_read=10448360 bytes_retransmit=9 bytes_invalid=0 send_seq=1315460 receive_seq=1315460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007674 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127617 bytes_read=394975 bytes_retransmit=0 bytes_invalid=0 send_seq=21245 receive_seq=21245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000174 adj=49999131  heater_bed: target=0 temp=59.1 pwm=0.000 sysload=0.43 cputime=6050.789 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.0 pwm=0.000
Stats 66834.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630964 bytes_read=10448463 bytes_retransmit=9 bytes_invalid=0 send_seq=1315461 receive_seq=1315461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127623 bytes_read=394991 bytes_retransmit=0 bytes_invalid=0 send_seq=21246 receive_seq=21246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000172 adj=49999134  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.43 cputime=6050.805 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.0 pwm=0.000
Stats 66835.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630976 bytes_read=10448597 bytes_retransmit=9 bytes_invalid=0 send_seq=1315463 receive_seq=1315463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127629 bytes_read=395007 bytes_retransmit=0 bytes_invalid=0 send_seq=21247 receive_seq=21247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=50000168 adj=49999129  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.40 cputime=6050.823 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.1 pwm=0.000
Stats 66836.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630982 bytes_read=10448714 bytes_retransmit=9 bytes_invalid=0 send_seq=1315464 receive_seq=1315464 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007692 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127641 bytes_read=395039 bytes_retransmit=0 bytes_invalid=0 send_seq=21249 receive_seq=21249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000166 adj=49999042  heater_bed: target=0 temp=59.0 pwm=0.000 sysload=0.40 cputime=6050.840 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.9 pwm=0.000
Stats 66837.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630988 bytes_read=10448817 bytes_retransmit=9 bytes_invalid=0 send_seq=1315465 receive_seq=1315465 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127647 bytes_read=395055 bytes_retransmit=0 bytes_invalid=0 send_seq=21250 receive_seq=21250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000163 adj=49999058  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.40 cputime=6050.856 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.9 pwm=0.000
Stats 66838.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69630994 bytes_read=10448949 bytes_retransmit=9 bytes_invalid=0 send_seq=1315466 receive_seq=1315466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127653 bytes_read=395084 bytes_retransmit=0 bytes_invalid=0 send_seq=21251 receive_seq=21251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000161 adj=49999060  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.40 cputime=6050.875 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.0 pwm=0.000
Stats 66839.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631000 bytes_read=10449066 bytes_retransmit=9 bytes_invalid=0 send_seq=1315467 receive_seq=1315467 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127659 bytes_read=395099 bytes_retransmit=0 bytes_invalid=0 send_seq=21252 receive_seq=21252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000161 adj=49999071  heater_bed: target=0 temp=58.9 pwm=0.000 sysload=0.40 cputime=6050.893 memavail=3265092 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.8 pwm=0.000
Stats 66840.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631006 bytes_read=10449169 bytes_retransmit=9 bytes_invalid=0 send_seq=1315468 receive_seq=1315468 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127665 bytes_read=395114 bytes_retransmit=0 bytes_invalid=0 send_seq=21253 receive_seq=21253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000159 adj=49999085  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.36 cputime=6050.909 memavail=3264592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.9 pwm=0.000
Stats 66841.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631012 bytes_read=10449281 bytes_retransmit=9 bytes_invalid=0 send_seq=1315469 receive_seq=1315469 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127671 bytes_read=395129 bytes_retransmit=0 bytes_invalid=0 send_seq=21254 receive_seq=21254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000156 adj=49999083  heater_bed: target=0 temp=58.8 pwm=0.000 sysload=0.36 cputime=6050.927 memavail=3264592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.0 pwm=0.000
Stats 66842.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631018 bytes_read=10449398 bytes_retransmit=9 bytes_invalid=0 send_seq=1315470 receive_seq=1315470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007679 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127677 bytes_read=395144 bytes_retransmit=0 bytes_invalid=0 send_seq=21255 receive_seq=21255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000154 adj=49999077  heater_bed: target=0 temp=58.7 pwm=0.000 sysload=0.36 cputime=6050.945 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.9 pwm=0.000
Stats 66843.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631024 bytes_read=10449515 bytes_retransmit=9 bytes_invalid=0 send_seq=1315471 receive_seq=1315471 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=127683 bytes_read=395172 bytes_retransmit=0 bytes_invalid=0 send_seq=21256 receive_seq=21256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000151 adj=49999085  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.36 cputime=6050.963 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.0 pwm=0.000
Stats 66844.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631030 bytes_read=10449633 bytes_retransmit=9 bytes_invalid=0 send_seq=1315472 receive_seq=1315472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=127689 bytes_read=395187 bytes_retransmit=0 bytes_invalid=0 send_seq=21257 receive_seq=21257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000153 adj=49999090  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.36 cputime=6050.980 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.2 pwm=0.000
Stats 66845.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631036 bytes_read=10449750 bytes_retransmit=9 bytes_invalid=0 send_seq=1315473 receive_seq=1315473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007662 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=127695 bytes_read=395203 bytes_retransmit=0 bytes_invalid=0 send_seq=21258 receive_seq=21258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000155 adj=49999151  heater_bed: target=0 temp=58.6 pwm=0.000 sysload=0.50 cputime=6050.996 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.0 pwm=0.000
Stats 66846.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631042 bytes_read=10449853 bytes_retransmit=9 bytes_invalid=0 send_seq=1315474 receive_seq=1315474 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007649 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=127701 bytes_read=395219 bytes_retransmit=0 bytes_invalid=0 send_seq=21259 receive_seq=21259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000152 adj=49999205  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.50 cputime=6051.013 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.2 pwm=0.000
Stats 66847.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631048 bytes_read=10449971 bytes_retransmit=9 bytes_invalid=0 send_seq=1315475 receive_seq=1315475 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007658 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=127707 bytes_read=395235 bytes_retransmit=0 bytes_invalid=0 send_seq=21260 receive_seq=21260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000149 adj=49999182  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.50 cputime=6051.030 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.3 pwm=0.000
Stats 66848.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631054 bytes_read=10450102 bytes_retransmit=9 bytes_invalid=0 send_seq=1315476 receive_seq=1315476 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007661 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127713 bytes_read=395264 bytes_retransmit=0 bytes_invalid=0 send_seq=21261 receive_seq=21261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000146 adj=49999114  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.50 cputime=6051.047 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.2 pwm=0.000
Stats 66849.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631060 bytes_read=10450205 bytes_retransmit=9 bytes_invalid=0 send_seq=1315477 receive_seq=1315477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007653 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127719 bytes_read=395280 bytes_retransmit=0 bytes_invalid=0 send_seq=21262 receive_seq=21262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000143 adj=49999091  heater_bed: target=0 temp=58.5 pwm=0.000 sysload=0.50 cputime=6051.063 memavail=3264344 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.4 pwm=0.000
Stats 66850.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631066 bytes_read=10450323 bytes_retransmit=9 bytes_invalid=0 send_seq=1315478 receive_seq=1315478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007654 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127725 bytes_read=395296 bytes_retransmit=0 bytes_invalid=0 send_seq=21263 receive_seq=21263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000140 adj=49999077  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.54 cputime=6051.080 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.6 pwm=0.000
Stats 66851.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631072 bytes_read=10450440 bytes_retransmit=9 bytes_invalid=0 send_seq=1315479 receive_seq=1315479 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007654 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127731 bytes_read=395312 bytes_retransmit=0 bytes_invalid=0 send_seq=21264 receive_seq=21264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000141 adj=49999059  heater_bed: target=0 temp=58.4 pwm=0.000 sysload=0.54 cputime=6051.096 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.5 pwm=0.000
Stats 66852.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631078 bytes_read=10450538 bytes_retransmit=9 bytes_invalid=0 send_seq=1315480 receive_seq=1315480 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007651 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127737 bytes_read=395328 bytes_retransmit=0 bytes_invalid=0 send_seq=21265 receive_seq=21265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000140 adj=49999110  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.54 cputime=6051.113 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.7 pwm=0.000
Stats 66853.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631084 bytes_read=10450670 bytes_retransmit=9 bytes_invalid=0 send_seq=1315481 receive_seq=1315481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007647 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127743 bytes_read=395357 bytes_retransmit=0 bytes_invalid=0 send_seq=21266 receive_seq=21266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000138 adj=49999111  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.54 cputime=6051.131 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.9 pwm=0.000
Stats 66854.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631090 bytes_read=10450787 bytes_retransmit=9 bytes_invalid=0 send_seq=1315482 receive_seq=1315482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007642 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127749 bytes_read=395373 bytes_retransmit=0 bytes_invalid=0 send_seq=21267 receive_seq=21267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000136 adj=49999117  heater_bed: target=0 temp=58.3 pwm=0.000 sysload=0.54 cputime=6051.149 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.8 pwm=0.000
Stats 66855.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631096 bytes_read=10450890 bytes_retransmit=9 bytes_invalid=0 send_seq=1315483 receive_seq=1315483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007644 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127755 bytes_read=395389 bytes_retransmit=0 bytes_invalid=0 send_seq=21268 receive_seq=21268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000134 adj=49999102  heater_bed: target=0 temp=58.2 pwm=0.000 sysload=0.57 cputime=6051.167 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.1 pwm=0.000
Stats 66856.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631102 bytes_read=10451008 bytes_retransmit=9 bytes_invalid=0 send_seq=1315484 receive_seq=1315484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007636 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127761 bytes_read=395405 bytes_retransmit=0 bytes_invalid=0 send_seq=21269 receive_seq=21269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000130 adj=49999083  heater_bed: target=0 temp=58.2 pwm=0.000 sysload=0.57 cputime=6051.184 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.3 pwm=0.000
Stats 66857.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631108 bytes_read=10451125 bytes_retransmit=9 bytes_invalid=0 send_seq=1315485 receive_seq=1315485 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007629 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127767 bytes_read=395421 bytes_retransmit=0 bytes_invalid=0 send_seq=21270 receive_seq=21270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000130 adj=49999066  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.57 cputime=6051.201 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.3 pwm=0.000
Stats 66858.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631114 bytes_read=10451242 bytes_retransmit=9 bytes_invalid=0 send_seq=1315486 receive_seq=1315486 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007628 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127773 bytes_read=395450 bytes_retransmit=0 bytes_invalid=0 send_seq=21271 receive_seq=21271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000132 adj=49999110  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.57 cputime=6051.218 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.5 pwm=0.000
Stats 66859.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631120 bytes_read=10451360 bytes_retransmit=9 bytes_invalid=0 send_seq=1315487 receive_seq=1315487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127779 bytes_read=395466 bytes_retransmit=0 bytes_invalid=0 send_seq=21272 receive_seq=21272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000132 adj=49999160  heater_bed: target=0 temp=58.1 pwm=0.000 sysload=0.57 cputime=6051.235 memavail=3263592 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.7 pwm=0.000
Stats 66860.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631126 bytes_read=10451477 bytes_retransmit=9 bytes_invalid=0 send_seq=1315488 receive_seq=1315488 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007627 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127785 bytes_read=395482 bytes_retransmit=0 bytes_invalid=0 send_seq=21273 receive_seq=21273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000129 adj=49999152  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.61 cputime=6051.251 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.7 pwm=0.000
Stats 66861.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631132 bytes_read=10451580 bytes_retransmit=9 bytes_invalid=0 send_seq=1315489 receive_seq=1315489 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127791 bytes_read=395498 bytes_retransmit=0 bytes_invalid=0 send_seq=21274 receive_seq=21274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000131 adj=49999118  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.61 cputime=6051.269 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 66862.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631138 bytes_read=10451697 bytes_retransmit=9 bytes_invalid=0 send_seq=1315490 receive_seq=1315490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=127797 bytes_read=395514 bytes_retransmit=0 bytes_invalid=0 send_seq=21275 receive_seq=21275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000129 adj=49999179  heater_bed: target=0 temp=58.0 pwm=0.000 sysload=0.61 cputime=6051.286 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.2 pwm=0.000
Stats 66863.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631144 bytes_read=10451824 bytes_retransmit=9 bytes_invalid=0 send_seq=1315491 receive_seq=1315491 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127803 bytes_read=395543 bytes_retransmit=0 bytes_invalid=0 send_seq=21276 receive_seq=21276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000130 adj=49999149  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.61 cputime=6051.303 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.3 pwm=0.000
Stats 66864.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631150 bytes_read=10451927 bytes_retransmit=9 bytes_invalid=0 send_seq=1315492 receive_seq=1315492 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007619 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127809 bytes_read=395559 bytes_retransmit=0 bytes_invalid=0 send_seq=21277 receive_seq=21277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000133 adj=49999164  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.61 cputime=6051.320 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.5 pwm=0.000
Stats 66865.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631156 bytes_read=10452059 bytes_retransmit=9 bytes_invalid=0 send_seq=1315493 receive_seq=1315493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007622 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127815 bytes_read=395575 bytes_retransmit=0 bytes_invalid=0 send_seq=21278 receive_seq=21278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000129 adj=49999220  heater_bed: target=0 temp=57.9 pwm=0.000 sysload=0.56 cputime=6051.339 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.6 pwm=0.000
Stats 66866.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631162 bytes_read=10452162 bytes_retransmit=9 bytes_invalid=0 send_seq=1315494 receive_seq=1315494 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127821 bytes_read=395591 bytes_retransmit=0 bytes_invalid=0 send_seq=21279 receive_seq=21279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000127 adj=49999153  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.56 cputime=6051.356 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.9 pwm=0.000
Stats 66867.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631168 bytes_read=10452265 bytes_retransmit=9 bytes_invalid=0 send_seq=1315495 receive_seq=1315495 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007623 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=127827 bytes_read=395607 bytes_retransmit=0 bytes_invalid=0 send_seq=21280 receive_seq=21280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000124 adj=49999128  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.56 cputime=6051.373 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.1 pwm=0.000
Stats 66868.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631174 bytes_read=10452411 bytes_retransmit=9 bytes_invalid=0 send_seq=1315496 receive_seq=1315496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007627 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127833 bytes_read=395636 bytes_retransmit=0 bytes_invalid=0 send_seq=21281 receive_seq=21281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000123 adj=49999094  heater_bed: target=0 temp=57.8 pwm=0.000 sysload=0.56 cputime=6051.392 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.2 pwm=0.000
Stats 66869.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631180 bytes_read=10452514 bytes_retransmit=9 bytes_invalid=0 send_seq=1315497 receive_seq=1315497 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007631 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127839 bytes_read=395652 bytes_retransmit=0 bytes_invalid=0 send_seq=21282 receive_seq=21282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000127 adj=49999077  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.56 cputime=6051.409 memavail=3263348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.5 pwm=0.000
Stats 66870.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631186 bytes_read=10452617 bytes_retransmit=9 bytes_invalid=0 send_seq=1315498 receive_seq=1315498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007628 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127845 bytes_read=395668 bytes_retransmit=0 bytes_invalid=0 send_seq=21283 receive_seq=21283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000125 adj=49999157  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.51 cputime=6051.427 memavail=3263104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.8 pwm=0.000
Stats 66871.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631192 bytes_read=10452749 bytes_retransmit=9 bytes_invalid=0 send_seq=1315499 receive_seq=1315499 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007621 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127851 bytes_read=395684 bytes_retransmit=0 bytes_invalid=0 send_seq=21284 receive_seq=21284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000120 adj=49999134  heater_bed: target=0 temp=57.7 pwm=0.000 sysload=0.51 cputime=6051.444 memavail=3263104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.9 pwm=0.000
Stats 66872.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631198 bytes_read=10452852 bytes_retransmit=9 bytes_invalid=0 send_seq=1315500 receive_seq=1315500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007655 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127857 bytes_read=395700 bytes_retransmit=0 bytes_invalid=0 send_seq=21285 receive_seq=21285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000117 adj=49999084  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.51 cputime=6051.463 memavail=3263104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.2 pwm=0.000
Stats 66873.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631204 bytes_read=10452966 bytes_retransmit=9 bytes_invalid=0 send_seq=1315501 receive_seq=1315501 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007654 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=127863 bytes_read=395716 bytes_retransmit=0 bytes_invalid=0 send_seq=21286 receive_seq=21286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000114 adj=49998994  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.51 cputime=6051.478 memavail=3263104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.5 pwm=0.000
Stats 66874.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631210 bytes_read=10453095 bytes_retransmit=9 bytes_invalid=0 send_seq=1315502 receive_seq=1315502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007648 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127869 bytes_read=395745 bytes_retransmit=0 bytes_invalid=0 send_seq=21287 receive_seq=21287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000111 adj=49998988  heater_bed: target=0 temp=57.6 pwm=0.000 sysload=0.51 cputime=6051.497 memavail=3263104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.6 pwm=0.000
Stats 66875.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631216 bytes_read=10453198 bytes_retransmit=9 bytes_invalid=0 send_seq=1315503 receive_seq=1315503 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007647 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127875 bytes_read=395761 bytes_retransmit=0 bytes_invalid=0 send_seq=21288 receive_seq=21288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000110 adj=49999001  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.47 cputime=6051.514 memavail=3263844 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.0 pwm=0.000
Stats 66876.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631222 bytes_read=10453301 bytes_retransmit=9 bytes_invalid=0 send_seq=1315504 receive_seq=1315504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007650 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127881 bytes_read=395777 bytes_retransmit=0 bytes_invalid=0 send_seq=21289 receive_seq=21289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000108 adj=49999015  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.47 cputime=6051.531 memavail=3263860 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.3 pwm=0.000
Stats 66877.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631228 bytes_read=10453433 bytes_retransmit=9 bytes_invalid=0 send_seq=1315505 receive_seq=1315505 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007643 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127887 bytes_read=395793 bytes_retransmit=0 bytes_invalid=0 send_seq=21290 receive_seq=21290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000106 adj=49999015  heater_bed: target=0 temp=57.5 pwm=0.000 sysload=0.47 cputime=6051.549 memavail=3263860 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.4 pwm=0.000
Stats 66878.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631234 bytes_read=10453536 bytes_retransmit=9 bytes_invalid=0 send_seq=1315506 receive_seq=1315506 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=127893 bytes_read=395809 bytes_retransmit=0 bytes_invalid=0 send_seq=21291 receive_seq=21291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000103 adj=49999039  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.47 cputime=6051.566 memavail=3263860 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.8 pwm=0.000
Stats 66879.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631240 bytes_read=10453653 bytes_retransmit=9 bytes_invalid=0 send_seq=1315507 receive_seq=1315507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007644 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127899 bytes_read=395838 bytes_retransmit=0 bytes_invalid=0 send_seq=21292 receive_seq=21292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000102 adj=49999030  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.47 cputime=6051.585 memavail=3263860 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.1 pwm=0.000
Stats 66880.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631246 bytes_read=10453785 bytes_retransmit=9 bytes_invalid=0 send_seq=1315508 receive_seq=1315508 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007646 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127905 bytes_read=395854 bytes_retransmit=0 bytes_invalid=0 send_seq=21293 receive_seq=21293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000100 adj=49999027  heater_bed: target=0 temp=57.4 pwm=0.000 sysload=0.43 cputime=6051.603 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.2 pwm=0.000
Stats 66881.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631252 bytes_read=10453888 bytes_retransmit=9 bytes_invalid=0 send_seq=1315509 receive_seq=1315509 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007645 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127911 bytes_read=395870 bytes_retransmit=0 bytes_invalid=0 send_seq=21294 receive_seq=21294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000097 adj=49999020  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.43 cputime=6051.619 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.6 pwm=0.000
Stats 66882.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631258 bytes_read=10453991 bytes_retransmit=9 bytes_invalid=0 send_seq=1315510 receive_seq=1315510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007641 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127917 bytes_read=395886 bytes_retransmit=0 bytes_invalid=0 send_seq=21295 receive_seq=21295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000098 adj=49999012  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.43 cputime=6051.636 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.0 pwm=0.000
Stats 66883.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631264 bytes_read=10454123 bytes_retransmit=9 bytes_invalid=0 send_seq=1315511 receive_seq=1315511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127923 bytes_read=395902 bytes_retransmit=0 bytes_invalid=0 send_seq=21296 receive_seq=21296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000099 adj=49999067  heater_bed: target=0 temp=57.3 pwm=0.000 sysload=0.43 cputime=6051.654 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.1 pwm=0.000
Stats 66884.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631270 bytes_read=10454235 bytes_retransmit=9 bytes_invalid=0 send_seq=1315512 receive_seq=1315512 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007636 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=127929 bytes_read=395931 bytes_retransmit=0 bytes_invalid=0 send_seq=21297 receive_seq=21297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000098 adj=49999097  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.43 cputime=6051.672 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.5 pwm=0.000
Stats 66885.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631276 bytes_read=10454338 bytes_retransmit=9 bytes_invalid=0 send_seq=1315513 receive_seq=1315513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=127935 bytes_read=395947 bytes_retransmit=0 bytes_invalid=0 send_seq=21298 receive_seq=21298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000099 adj=49999111  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.40 cputime=6051.689 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.9 pwm=0.000
Stats 66886.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631282 bytes_read=10454470 bytes_retransmit=9 bytes_invalid=0 send_seq=1315514 receive_seq=1315514 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007636 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=127941 bytes_read=395963 bytes_retransmit=0 bytes_invalid=0 send_seq=21299 receive_seq=21299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000097 adj=49999129  heater_bed: target=0 temp=57.2 pwm=0.000 sysload=0.40 cputime=6051.707 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.0 pwm=0.000
Stats 66887.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631288 bytes_read=10454573 bytes_retransmit=9 bytes_invalid=0 send_seq=1315515 receive_seq=1315515 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007637 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=127947 bytes_read=395979 bytes_retransmit=0 bytes_invalid=0 send_seq=21300 receive_seq=21300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000094 adj=49999099  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.40 cputime=6051.724 memavail=3263868 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.4 pwm=0.000
Stats 66888.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631294 bytes_read=10454676 bytes_retransmit=9 bytes_invalid=0 send_seq=1315516 receive_seq=1315516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007631 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=127953 bytes_read=395995 bytes_retransmit=0 bytes_invalid=0 send_seq=21301 receive_seq=21301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000090 adj=49999060  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.40 cputime=6051.741 memavail=3263872 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.8 pwm=0.000
Stats 66889.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631300 bytes_read=10454822 bytes_retransmit=9 bytes_invalid=0 send_seq=1315517 receive_seq=1315517 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007624 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127959 bytes_read=396024 bytes_retransmit=0 bytes_invalid=0 send_seq=21302 receive_seq=21302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000086 adj=49999031  heater_bed: target=0 temp=57.1 pwm=0.000 sysload=0.40 cputime=6051.759 memavail=3263872 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.0 pwm=0.000
Stats 66890.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631306 bytes_read=10454925 bytes_retransmit=9 bytes_invalid=0 send_seq=1315518 receive_seq=1315518 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007620 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127965 bytes_read=396040 bytes_retransmit=0 bytes_invalid=0 send_seq=21303 receive_seq=21303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000081 adj=49999009  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.37 cputime=6051.776 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 66891.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631312 bytes_read=10455043 bytes_retransmit=9 bytes_invalid=0 send_seq=1315519 receive_seq=1315519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007638 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127971 bytes_read=396056 bytes_retransmit=0 bytes_invalid=0 send_seq=21304 receive_seq=21304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000080 adj=49998968  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.37 cputime=6051.793 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.8 pwm=0.000
Stats 66892.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631318 bytes_read=10455160 bytes_retransmit=9 bytes_invalid=0 send_seq=1315520 receive_seq=1315520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007644 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127977 bytes_read=396072 bytes_retransmit=0 bytes_invalid=0 send_seq=21305 receive_seq=21305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000081 adj=49998962  heater_bed: target=0 temp=57.0 pwm=0.000 sysload=0.37 cputime=6051.810 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.0 pwm=0.000
Stats 66893.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631324 bytes_read=10455263 bytes_retransmit=9 bytes_invalid=0 send_seq=1315521 receive_seq=1315521 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007646 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=127983 bytes_read=396088 bytes_retransmit=0 bytes_invalid=0 send_seq=21306 receive_seq=21306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000082 adj=49999003  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.37 cputime=6051.827 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.4 pwm=0.000
Stats 66894.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631330 bytes_read=10455394 bytes_retransmit=9 bytes_invalid=0 send_seq=1315522 receive_seq=1315522 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127989 bytes_read=396117 bytes_retransmit=0 bytes_invalid=0 send_seq=21307 receive_seq=21307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000084 adj=49999045  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.37 cputime=6051.844 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.8 pwm=0.000
Stats 66895.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631336 bytes_read=10455508 bytes_retransmit=9 bytes_invalid=0 send_seq=1315523 receive_seq=1315523 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=127995 bytes_read=396133 bytes_retransmit=0 bytes_invalid=0 send_seq=21308 receive_seq=21308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000085 adj=49999075  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=0.34 cputime=6051.862 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.0 pwm=0.000
Stats 66896.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631348 bytes_read=10455627 bytes_retransmit=9 bytes_invalid=0 send_seq=1315525 receive_seq=1315525 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128007 bytes_read=396165 bytes_retransmit=0 bytes_invalid=0 send_seq=21310 receive_seq=21310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000089 adj=49999033  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.34 cputime=6051.881 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.4 pwm=0.000
Stats 66897.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631354 bytes_read=10455745 bytes_retransmit=9 bytes_invalid=0 send_seq=1315526 receive_seq=1315526 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128013 bytes_read=396181 bytes_retransmit=0 bytes_invalid=0 send_seq=21311 receive_seq=21311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000084 adj=49999127  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.34 cputime=6051.898 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.8 pwm=0.000
Stats 66898.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631360 bytes_read=10455862 bytes_retransmit=9 bytes_invalid=0 send_seq=1315527 receive_seq=1315527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128019 bytes_read=396197 bytes_retransmit=0 bytes_invalid=0 send_seq=21312 receive_seq=21312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000080 adj=49999063  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=0.34 cputime=6051.916 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.1 pwm=0.000
Stats 66899.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631366 bytes_read=10455979 bytes_retransmit=9 bytes_invalid=0 send_seq=1315528 receive_seq=1315528 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128025 bytes_read=396226 bytes_retransmit=0 bytes_invalid=0 send_seq=21313 receive_seq=21313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999024  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.34 cputime=6051.934 memavail=3263876 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.5 pwm=0.000
Stats 66900.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631372 bytes_read=10456097 bytes_retransmit=9 bytes_invalid=0 send_seq=1315529 receive_seq=1315529 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128031 bytes_read=396242 bytes_retransmit=0 bytes_invalid=0 send_seq=21314 receive_seq=21314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000072 adj=49998988  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.31 cputime=6051.952 memavail=3264888 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.9 pwm=0.000
Stats 66901.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631378 bytes_read=10456214 bytes_retransmit=9 bytes_invalid=0 send_seq=1315530 receive_seq=1315530 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128037 bytes_read=396258 bytes_retransmit=0 bytes_invalid=0 send_seq=21315 receive_seq=21315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000073 adj=49998937  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=0.31 cputime=6051.969 memavail=3264888 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.2 pwm=0.000
Stats 66902.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631384 bytes_read=10456317 bytes_retransmit=9 bytes_invalid=0 send_seq=1315531 receive_seq=1315531 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128043 bytes_read=396274 bytes_retransmit=0 bytes_invalid=0 send_seq=21316 receive_seq=21316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000074 adj=49999004  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=0.31 cputime=6051.987 memavail=3264888 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.6 pwm=0.000
Stats 66903.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631390 bytes_read=10456435 bytes_retransmit=9 bytes_invalid=0 send_seq=1315532 receive_seq=1315532 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007692 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128049 bytes_read=396290 bytes_retransmit=0 bytes_invalid=0 send_seq=21317 receive_seq=21317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000078 adj=49999059  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=0.31 cputime=6052.004 memavail=3264888 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.0 pwm=0.000
Stats 66904.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631396 bytes_read=10456566 bytes_retransmit=9 bytes_invalid=0 send_seq=1315533 receive_seq=1315533 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128055 bytes_read=396319 bytes_retransmit=0 bytes_invalid=0 send_seq=21318 receive_seq=21318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999102  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.31 cputime=6052.021 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.4 pwm=0.000
Stats 66905.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631402 bytes_read=10456667 bytes_retransmit=9 bytes_invalid=0 send_seq=1315534 receive_seq=1315534 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007679 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128061 bytes_read=396335 bytes_retransmit=0 bytes_invalid=0 send_seq=21319 receive_seq=21319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999107  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.29 cputime=6052.038 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.8 pwm=0.000
Stats 66906.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631408 bytes_read=10456783 bytes_retransmit=9 bytes_invalid=0 send_seq=1315535 receive_seq=1315535 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128067 bytes_read=396351 bytes_retransmit=0 bytes_invalid=0 send_seq=21320 receive_seq=21320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000074 adj=49999129  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.29 cputime=6052.054 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.2 pwm=0.000
Stats 66907.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631414 bytes_read=10456900 bytes_retransmit=9 bytes_invalid=0 send_seq=1315536 receive_seq=1315536 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128073 bytes_read=396367 bytes_retransmit=0 bytes_invalid=0 send_seq=21321 receive_seq=21321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000074 adj=49999066  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=0.29 cputime=6052.071 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.5 pwm=0.000
Stats 66908.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631420 bytes_read=10457003 bytes_retransmit=9 bytes_invalid=0 send_seq=1315537 receive_seq=1315537 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128079 bytes_read=396383 bytes_retransmit=0 bytes_invalid=0 send_seq=21322 receive_seq=21322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000072 adj=49999081  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.29 cputime=6052.087 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.0 pwm=0.000
Stats 66909.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631426 bytes_read=10457135 bytes_retransmit=9 bytes_invalid=0 send_seq=1315538 receive_seq=1315538 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007674 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128085 bytes_read=396412 bytes_retransmit=0 bytes_invalid=0 send_seq=21323 receive_seq=21323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000069 adj=49999066  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.29 cputime=6052.105 memavail=3265144 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.5 pwm=0.000
Stats 66910.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631432 bytes_read=10457252 bytes_retransmit=9 bytes_invalid=0 send_seq=1315539 receive_seq=1315539 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007669 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128091 bytes_read=396428 bytes_retransmit=0 bytes_invalid=0 send_seq=21324 receive_seq=21324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999045  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=0.26 cputime=6052.122 memavail=3265652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.8 pwm=0.000
Stats 66911.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631438 bytes_read=10457355 bytes_retransmit=9 bytes_invalid=0 send_seq=1315540 receive_seq=1315540 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128097 bytes_read=396444 bytes_retransmit=0 bytes_invalid=0 send_seq=21325 receive_seq=21325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000076 adj=49999192  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.26 cputime=6052.139 memavail=3265652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.2 pwm=0.000
Stats 66912.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631444 bytes_read=10457473 bytes_retransmit=9 bytes_invalid=0 send_seq=1315541 receive_seq=1315541 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128103 bytes_read=396460 bytes_retransmit=0 bytes_invalid=0 send_seq=21326 receive_seq=21326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000072 adj=49999150  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.26 cputime=6052.156 memavail=3265652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.7 pwm=0.000
Stats 66913.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631450 bytes_read=10457590 bytes_retransmit=9 bytes_invalid=0 send_seq=1315542 receive_seq=1315542 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128109 bytes_read=396476 bytes_retransmit=0 bytes_invalid=0 send_seq=21327 receive_seq=21327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000085 adj=49999058  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.26 cputime=6052.173 memavail=3265652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.0 pwm=0.000
Stats 66914.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631456 bytes_read=10457707 bytes_retransmit=9 bytes_invalid=0 send_seq=1315543 receive_seq=1315543 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128115 bytes_read=396505 bytes_retransmit=0 bytes_invalid=0 send_seq=21328 receive_seq=21328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000084 adj=49999272  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=0.26 cputime=6052.189 memavail=3265400 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.5 pwm=0.000
Stats 66915.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631462 bytes_read=10457825 bytes_retransmit=9 bytes_invalid=0 send_seq=1315544 receive_seq=1315544 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128121 bytes_read=396521 bytes_retransmit=0 bytes_invalid=0 send_seq=21329 receive_seq=21329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000095 adj=49999196  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.24 cputime=6052.206 memavail=3265400 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.0 pwm=0.000
Stats 66916.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631468 bytes_read=10457938 bytes_retransmit=9 bytes_invalid=0 send_seq=1315545 receive_seq=1315545 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128127 bytes_read=396537 bytes_retransmit=0 bytes_invalid=0 send_seq=21330 receive_seq=21330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000091 adj=49999351  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=0.24 cputime=6052.222 memavail=3265400 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.3 pwm=0.000
Stats 66917.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631474 bytes_read=10458041 bytes_retransmit=9 bytes_invalid=0 send_seq=1315546 receive_seq=1315546 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128133 bytes_read=396553 bytes_retransmit=0 bytes_invalid=0 send_seq=21331 receive_seq=21331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000088 adj=49999266  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.24 cputime=6052.239 memavail=3265408 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.8 pwm=0.000
Stats 66918.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631480 bytes_read=10458159 bytes_retransmit=9 bytes_invalid=0 send_seq=1315547 receive_seq=1315547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128139 bytes_read=396569 bytes_retransmit=0 bytes_invalid=0 send_seq=21332 receive_seq=21332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000084 adj=49999183  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.24 cputime=6052.255 memavail=3265408 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.3 pwm=0.000
Stats 66919.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631486 bytes_read=10458291 bytes_retransmit=9 bytes_invalid=0 send_seq=1315548 receive_seq=1315548 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007692 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128145 bytes_read=396598 bytes_retransmit=0 bytes_invalid=0 send_seq=21333 receive_seq=21333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000082 adj=49999109  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=0.24 cputime=6052.273 memavail=3265408 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.7 pwm=0.000
Stats 66920.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631492 bytes_read=10458397 bytes_retransmit=9 bytes_invalid=0 send_seq=1315549 receive_seq=1315549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128151 bytes_read=396614 bytes_retransmit=0 bytes_invalid=0 send_seq=21334 receive_seq=21334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000083 adj=49999059  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.22 cputime=6052.289 memavail=3265912 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.2 pwm=0.000
Stats 66921.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631498 bytes_read=10458518 bytes_retransmit=9 bytes_invalid=0 send_seq=1315550 receive_seq=1315550 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128157 bytes_read=396630 bytes_retransmit=0 bytes_invalid=0 send_seq=21335 receive_seq=21335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000086 adj=49999102  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.22 cputime=6052.306 memavail=3265912 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.7 pwm=0.000
Stats 66922.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631504 bytes_read=10458639 bytes_retransmit=9 bytes_invalid=0 send_seq=1315551 receive_seq=1315551 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128163 bytes_read=396646 bytes_retransmit=0 bytes_invalid=0 send_seq=21336 receive_seq=21336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000081 adj=49999155  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=0.22 cputime=6052.323 memavail=3265912 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.0 pwm=0.000
Stats 66923.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631510 bytes_read=10458745 bytes_retransmit=9 bytes_invalid=0 send_seq=1315552 receive_seq=1315552 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128169 bytes_read=396662 bytes_retransmit=0 bytes_invalid=0 send_seq=21337 receive_seq=21337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999076  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.22 cputime=6052.339 memavail=3265912 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.5 pwm=0.000
Stats 66924.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631516 bytes_read=10458880 bytes_retransmit=9 bytes_invalid=0 send_seq=1315553 receive_seq=1315553 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128175 bytes_read=396691 bytes_retransmit=0 bytes_invalid=0 send_seq=21338 receive_seq=21338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000073 adj=49999028  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.22 cputime=6052.356 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.0 pwm=0.000
Stats 66925.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631522 bytes_read=10459001 bytes_retransmit=9 bytes_invalid=0 send_seq=1315554 receive_seq=1315554 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007677 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128181 bytes_read=396707 bytes_retransmit=0 bytes_invalid=0 send_seq=21339 receive_seq=21339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000069 adj=49998991  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=0.20 cputime=6052.373 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.4 pwm=0.000
Stats 66926.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631528 bytes_read=10459107 bytes_retransmit=9 bytes_invalid=0 send_seq=1315555 receive_seq=1315555 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128187 bytes_read=396722 bytes_retransmit=0 bytes_invalid=0 send_seq=21340 receive_seq=21340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49998955  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.20 cputime=6052.389 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.9 pwm=0.000
Stats 66927.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631534 bytes_read=10459222 bytes_retransmit=9 bytes_invalid=0 send_seq=1315556 receive_seq=1315556 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128193 bytes_read=396737 bytes_retransmit=0 bytes_invalid=0 send_seq=21341 receive_seq=21341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000063 adj=49998950  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.20 cputime=6052.405 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.4 pwm=0.000
Stats 66928.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631540 bytes_read=10459343 bytes_retransmit=9 bytes_invalid=0 send_seq=1315557 receive_seq=1315557 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128199 bytes_read=396752 bytes_retransmit=0 bytes_invalid=0 send_seq=21342 receive_seq=21342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49998956  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=0.20 cputime=6052.421 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.8 pwm=0.000
Stats 66929.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631546 bytes_read=10459463 bytes_retransmit=9 bytes_invalid=0 send_seq=1315558 receive_seq=1315558 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128205 bytes_read=396780 bytes_retransmit=0 bytes_invalid=0 send_seq=21343 receive_seq=21343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49999032  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.20 cputime=6052.438 memavail=3265916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.3 pwm=0.000
Stats 66930.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631552 bytes_read=10459584 bytes_retransmit=9 bytes_invalid=0 send_seq=1315559 receive_seq=1315559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128211 bytes_read=396795 bytes_retransmit=0 bytes_invalid=0 send_seq=21344 receive_seq=21344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000068 adj=49999023  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.19 cputime=6052.455 memavail=3266676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.8 pwm=0.000
Stats 66931.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631558 bytes_read=10459705 bytes_retransmit=9 bytes_invalid=0 send_seq=1315560 receive_seq=1315560 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128217 bytes_read=396811 bytes_retransmit=0 bytes_invalid=0 send_seq=21345 receive_seq=21345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000067 adj=49999089  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.19 cputime=6052.472 memavail=3266676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.2 pwm=0.000
Stats 66932.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631564 bytes_read=10459811 bytes_retransmit=9 bytes_invalid=0 send_seq=1315561 receive_seq=1315561 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128223 bytes_read=396827 bytes_retransmit=0 bytes_invalid=0 send_seq=21346 receive_seq=21346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49999076  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=0.19 cputime=6052.490 memavail=3266172 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.8 pwm=0.000
Stats 66933.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631570 bytes_read=10459932 bytes_retransmit=9 bytes_invalid=0 send_seq=1315562 receive_seq=1315562 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007726 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128229 bytes_read=396843 bytes_retransmit=0 bytes_invalid=0 send_seq=21347 receive_seq=21347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000063 adj=49999034  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.19 cputime=6052.508 memavail=3266172 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.3 pwm=0.000
Stats 66934.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631576 bytes_read=10460067 bytes_retransmit=9 bytes_invalid=0 send_seq=1315563 receive_seq=1315563 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007719 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128235 bytes_read=396872 bytes_retransmit=0 bytes_invalid=0 send_seq=21348 receive_seq=21348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000062 adj=49998950  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.19 cputime=6052.525 memavail=3265668 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.7 pwm=0.000
Stats 66935.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631582 bytes_read=10460173 bytes_retransmit=9 bytes_invalid=0 send_seq=1315564 receive_seq=1315564 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007714 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128241 bytes_read=396888 bytes_retransmit=0 bytes_invalid=0 send_seq=21349 receive_seq=21349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000058 adj=49998982  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.17 cputime=6052.542 memavail=3265672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.3 pwm=0.000
Stats 66936.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631588 bytes_read=10460294 bytes_retransmit=9 bytes_invalid=0 send_seq=1315565 receive_seq=1315565 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007717 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128247 bytes_read=396904 bytes_retransmit=0 bytes_invalid=0 send_seq=21350 receive_seq=21350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000059 adj=49998970  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.17 cputime=6052.559 memavail=3265672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.8 pwm=0.000
Stats 66937.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631594 bytes_read=10460413 bytes_retransmit=9 bytes_invalid=0 send_seq=1315566 receive_seq=1315566 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007707 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128253 bytes_read=396920 bytes_retransmit=0 bytes_invalid=0 send_seq=21351 receive_seq=21351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000056 adj=49999011  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.17 cputime=6052.576 memavail=3265672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.2 pwm=0.000
Stats 66938.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631600 bytes_read=10460515 bytes_retransmit=9 bytes_invalid=0 send_seq=1315567 receive_seq=1315567 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128259 bytes_read=396936 bytes_retransmit=0 bytes_invalid=0 send_seq=21352 receive_seq=21352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000067 adj=49998999  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.17 cputime=6052.591 memavail=3265672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.8 pwm=0.000
Stats 66939.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631606 bytes_read=10460650 bytes_retransmit=9 bytes_invalid=0 send_seq=1315568 receive_seq=1315568 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=128265 bytes_read=396965 bytes_retransmit=0 bytes_invalid=0 send_seq=21353 receive_seq=21353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000066 adj=49999211  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.17 cputime=6052.609 memavail=3265672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.3 pwm=0.000
Stats 66940.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631612 bytes_read=10460771 bytes_retransmit=9 bytes_invalid=0 send_seq=1315569 receive_seq=1315569 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007695 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=128271 bytes_read=396981 bytes_retransmit=0 bytes_invalid=0 send_seq=21354 receive_seq=21354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000067 adj=49999175  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.16 cputime=6052.624 memavail=3265676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.7 pwm=0.000
Stats 66941.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631618 bytes_read=10460877 bytes_retransmit=9 bytes_invalid=0 send_seq=1315570 receive_seq=1315570 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=128277 bytes_read=396997 bytes_retransmit=0 bytes_invalid=0 send_seq=21355 receive_seq=21355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000076 adj=49999169  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.16 cputime=6052.640 memavail=3265676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.3 pwm=0.000
Stats 66942.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631624 bytes_read=10460998 bytes_retransmit=9 bytes_invalid=0 send_seq=1315571 receive_seq=1315571 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=128283 bytes_read=397013 bytes_retransmit=0 bytes_invalid=0 send_seq=21356 receive_seq=21356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000077 adj=49999318  heater_bed: target=0 temp=55.4 pwm=0.000 sysload=0.16 cputime=6052.657 memavail=3265676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.9 pwm=0.000
Stats 66943.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631630 bytes_read=10461119 bytes_retransmit=9 bytes_invalid=0 send_seq=1315572 receive_seq=1315572 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=128289 bytes_read=397029 bytes_retransmit=0 bytes_invalid=0 send_seq=21357 receive_seq=21357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000076 adj=49999288  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.16 cputime=6052.674 memavail=3265676 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.3 pwm=0.000
Stats 66944.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631636 bytes_read=10461239 bytes_retransmit=9 bytes_invalid=0 send_seq=1315573 receive_seq=1315573 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128295 bytes_read=397058 bytes_retransmit=0 bytes_invalid=0 send_seq=21358 receive_seq=21358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000071 adj=49999234  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.16 cputime=6052.691 memavail=3265172 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.9 pwm=0.000
Stats 66945.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631642 bytes_read=10461360 bytes_retransmit=9 bytes_invalid=0 send_seq=1315574 receive_seq=1315574 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128301 bytes_read=397074 bytes_retransmit=0 bytes_invalid=0 send_seq=21359 receive_seq=21359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000070 adj=49999120  heater_bed: target=0 temp=55.3 pwm=0.000 sysload=0.31 cputime=6052.707 memavail=3265176 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.4 pwm=0.000
Stats 66946.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631648 bytes_read=10461481 bytes_retransmit=9 bytes_invalid=0 send_seq=1315575 receive_seq=1315575 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007680 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128307 bytes_read=397090 bytes_retransmit=0 bytes_invalid=0 send_seq=21360 receive_seq=21360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49999107  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.31 cputime=6052.724 memavail=3265176 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.8 pwm=0.000
Stats 66947.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631654 bytes_read=10461587 bytes_retransmit=9 bytes_invalid=0 send_seq=1315576 receive_seq=1315576 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128313 bytes_read=397106 bytes_retransmit=0 bytes_invalid=0 send_seq=21361 receive_seq=21361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000061 adj=49999033  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.31 cputime=6052.740 memavail=3265176 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 66948.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631660 bytes_read=10461705 bytes_retransmit=9 bytes_invalid=0 send_seq=1315577 receive_seq=1315577 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128319 bytes_read=397122 bytes_retransmit=0 bytes_invalid=0 send_seq=21362 receive_seq=21362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000065 adj=49998998  heater_bed: target=0 temp=55.2 pwm=0.000 sysload=0.31 cputime=6052.756 memavail=3265176 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.0 pwm=0.000
Stats 66949.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631666 bytes_read=10461838 bytes_retransmit=9 bytes_invalid=0 send_seq=1315578 receive_seq=1315578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007669 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128325 bytes_read=397151 bytes_retransmit=0 bytes_invalid=0 send_seq=21363 receive_seq=21363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000083 adj=49999106  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.31 cputime=6052.774 memavail=3265176 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.5 pwm=0.000
Stats 66950.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631672 bytes_read=10461944 bytes_retransmit=9 bytes_invalid=0 send_seq=1315579 receive_seq=1315579 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128331 bytes_read=397167 bytes_retransmit=0 bytes_invalid=0 send_seq=21364 receive_seq=21364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000081 adj=49999377  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.28 cputime=6052.790 memavail=3265180 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.0 pwm=0.000
Stats 66951.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631678 bytes_read=10462065 bytes_retransmit=9 bytes_invalid=0 send_seq=1315580 receive_seq=1315580 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007672 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128337 bytes_read=397183 bytes_retransmit=0 bytes_invalid=0 send_seq=21365 receive_seq=21365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000079 adj=49999279  heater_bed: target=0 temp=55.1 pwm=0.000 sysload=0.28 cputime=6052.807 memavail=3265180 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.6 pwm=0.000
Stats 66952.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631684 bytes_read=10462186 bytes_retransmit=9 bytes_invalid=0 send_seq=1315581 receive_seq=1315581 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128343 bytes_read=397199 bytes_retransmit=0 bytes_invalid=0 send_seq=21366 receive_seq=21366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000073 adj=49999219  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.28 cputime=6052.824 memavail=3265180 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.1 pwm=0.000
Stats 66953.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631690 bytes_read=10462292 bytes_retransmit=9 bytes_invalid=0 send_seq=1315582 receive_seq=1315582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128349 bytes_read=397215 bytes_retransmit=0 bytes_invalid=0 send_seq=21367 receive_seq=21367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000068 adj=49999100  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.28 cputime=6052.841 memavail=3265328 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.7 pwm=0.000
Stats 66954.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631696 bytes_read=10462427 bytes_retransmit=9 bytes_invalid=0 send_seq=1315583 receive_seq=1315583 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128355 bytes_read=397244 bytes_retransmit=0 bytes_invalid=0 send_seq=21368 receive_seq=21368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000068 adj=49999016  heater_bed: target=0 temp=55.0 pwm=0.000 sysload=0.28 cputime=6052.859 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.3 pwm=0.000
Stats 66955.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631702 bytes_read=10462548 bytes_retransmit=9 bytes_invalid=0 send_seq=1315584 receive_seq=1315584 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128361 bytes_read=397260 bytes_retransmit=0 bytes_invalid=0 send_seq=21369 receive_seq=21369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000061 adj=49999019  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.26 cputime=6052.876 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.8 pwm=0.000
Stats 66956.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631708 bytes_read=10462654 bytes_retransmit=9 bytes_invalid=0 send_seq=1315585 receive_seq=1315585 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128367 bytes_read=397276 bytes_retransmit=0 bytes_invalid=0 send_seq=21370 receive_seq=21370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000062 adj=49998950  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.26 cputime=6052.894 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.4 pwm=0.000
Stats 66957.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631720 bytes_read=10462791 bytes_retransmit=9 bytes_invalid=0 send_seq=1315587 receive_seq=1315587 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128379 bytes_read=397308 bytes_retransmit=0 bytes_invalid=0 send_seq=21372 receive_seq=21372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000058 adj=49999006  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.26 cputime=6052.912 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.0 pwm=0.000
Stats 66958.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631726 bytes_read=10462912 bytes_retransmit=9 bytes_invalid=0 send_seq=1315588 receive_seq=1315588 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128385 bytes_read=397324 bytes_retransmit=0 bytes_invalid=0 send_seq=21373 receive_seq=21373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000059 adj=49998953  heater_bed: target=0 temp=54.9 pwm=0.000 sysload=0.26 cputime=6052.929 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.4 pwm=0.000
Stats 66959.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631732 bytes_read=10463027 bytes_retransmit=9 bytes_invalid=0 send_seq=1315589 receive_seq=1315589 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128391 bytes_read=397353 bytes_retransmit=0 bytes_invalid=0 send_seq=21374 receive_seq=21374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000059 adj=49999011  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.26 cputime=6052.947 memavail=3265184 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.0 pwm=0.000
Stats 66960.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631738 bytes_read=10463148 bytes_retransmit=9 bytes_invalid=0 send_seq=1315590 receive_seq=1315590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128397 bytes_read=397369 bytes_retransmit=0 bytes_invalid=0 send_seq=21375 receive_seq=21375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000052 adj=49999011  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.40 cputime=6052.963 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.7 pwm=0.000
Stats 66961.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631744 bytes_read=10463269 bytes_retransmit=9 bytes_invalid=0 send_seq=1315591 receive_seq=1315591 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128403 bytes_read=397385 bytes_retransmit=0 bytes_invalid=0 send_seq=21376 receive_seq=21376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000046 adj=49998924  heater_bed: target=0 temp=54.8 pwm=0.000 sysload=0.40 cputime=6052.980 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.2 pwm=0.000
Stats 66962.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631750 bytes_read=10463375 bytes_retransmit=9 bytes_invalid=0 send_seq=1315592 receive_seq=1315592 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128409 bytes_read=397401 bytes_retransmit=0 bytes_invalid=0 send_seq=21377 receive_seq=21377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000046 adj=49998885  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.40 cputime=6052.999 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.8 pwm=0.000
Stats 66963.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631756 bytes_read=10463496 bytes_retransmit=9 bytes_invalid=0 send_seq=1315593 receive_seq=1315593 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007683 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128415 bytes_read=397417 bytes_retransmit=0 bytes_invalid=0 send_seq=21378 receive_seq=21378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000044 adj=49998933  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.40 cputime=6053.016 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.4 pwm=0.000
Stats 66964.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631762 bytes_read=10463631 bytes_retransmit=9 bytes_invalid=0 send_seq=1315594 receive_seq=1315594 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128421 bytes_read=397446 bytes_retransmit=0 bytes_invalid=0 send_seq=21379 receive_seq=21379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000037 adj=49998938  heater_bed: target=0 temp=54.7 pwm=0.000 sysload=0.40 cputime=6053.033 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.9 pwm=0.000
Stats 66965.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631768 bytes_read=10463737 bytes_retransmit=9 bytes_invalid=0 send_seq=1315595 receive_seq=1315595 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007672 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128427 bytes_read=397462 bytes_retransmit=0 bytes_invalid=0 send_seq=21380 receive_seq=21380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000030 adj=49998875  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.45 cputime=6053.050 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.5 pwm=0.000
Stats 66966.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631774 bytes_read=10463858 bytes_retransmit=9 bytes_invalid=0 send_seq=1315596 receive_seq=1315596 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128433 bytes_read=397478 bytes_retransmit=0 bytes_invalid=0 send_seq=21381 receive_seq=21381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000030 adj=49998837  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.45 cputime=6053.067 memavail=3264944 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.1 pwm=0.000
Stats 66967.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631780 bytes_read=10463979 bytes_retransmit=9 bytes_invalid=0 send_seq=1315597 receive_seq=1315597 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128439 bytes_read=397494 bytes_retransmit=0 bytes_invalid=0 send_seq=21382 receive_seq=21382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000025 adj=49998885  heater_bed: target=0 temp=54.6 pwm=0.000 sysload=0.45 cputime=6053.084 memavail=3264188 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.6 pwm=0.000
Stats 66968.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631786 bytes_read=10464085 bytes_retransmit=9 bytes_invalid=0 send_seq=1315598 receive_seq=1315598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=128445 bytes_read=397510 bytes_retransmit=0 bytes_invalid=0 send_seq=21383 receive_seq=21383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000021 adj=49998846  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.45 cputime=6053.101 memavail=3264188 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.3 pwm=0.000
Stats 66969.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631792 bytes_read=10464220 bytes_retransmit=9 bytes_invalid=0 send_seq=1315599 receive_seq=1315599 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128451 bytes_read=397539 bytes_retransmit=0 bytes_invalid=0 send_seq=21384 receive_seq=21384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000016 adj=49998836  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.45 cputime=6053.119 memavail=3264188 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.9 pwm=0.000
Stats 66970.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631798 bytes_read=10464336 bytes_retransmit=9 bytes_invalid=0 send_seq=1315600 receive_seq=1315600 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128457 bytes_read=397555 bytes_retransmit=0 bytes_invalid=0 send_seq=21385 receive_seq=21385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000016 adj=49998815  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.41 cputime=6053.136 memavail=3263948 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.4 pwm=0.000
Stats 66971.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631804 bytes_read=10464442 bytes_retransmit=9 bytes_invalid=0 send_seq=1315601 receive_seq=1315601 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128463 bytes_read=397571 bytes_retransmit=0 bytes_invalid=0 send_seq=21386 receive_seq=21386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000014 adj=49998872  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.41 cputime=6053.153 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.0 pwm=0.000
Stats 66972.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631810 bytes_read=10464563 bytes_retransmit=9 bytes_invalid=0 send_seq=1315602 receive_seq=1315602 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128469 bytes_read=397587 bytes_retransmit=0 bytes_invalid=0 send_seq=21387 receive_seq=21387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000019 adj=49998880  heater_bed: target=0 temp=54.5 pwm=0.000 sysload=0.41 cputime=6053.171 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.7 pwm=0.000
Stats 66973.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631816 bytes_read=10464684 bytes_retransmit=9 bytes_invalid=0 send_seq=1315603 receive_seq=1315603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128475 bytes_read=397603 bytes_retransmit=0 bytes_invalid=0 send_seq=21388 receive_seq=21388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000020 adj=49999005  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.41 cputime=6053.189 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.2 pwm=0.000
Stats 66974.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631822 bytes_read=10464804 bytes_retransmit=9 bytes_invalid=0 send_seq=1315604 receive_seq=1315604 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128481 bytes_read=397632 bytes_retransmit=0 bytes_invalid=0 send_seq=21389 receive_seq=21389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000019 adj=49999014  heater_bed: target=0 temp=54.4 pwm=0.000 sysload=0.41 cputime=6053.207 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.9 pwm=0.000
Stats 66975.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631828 bytes_read=10464925 bytes_retransmit=9 bytes_invalid=0 send_seq=1315605 receive_seq=1315605 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128487 bytes_read=397648 bytes_retransmit=0 bytes_invalid=0 send_seq=21390 receive_seq=21390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000018 adj=49999018  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.38 cputime=6053.225 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.5 pwm=0.000
Stats 66976.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631834 bytes_read=10465046 bytes_retransmit=9 bytes_invalid=0 send_seq=1315606 receive_seq=1315606 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007682 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128493 bytes_read=397664 bytes_retransmit=0 bytes_invalid=0 send_seq=21391 receive_seq=21391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000015 adj=49999021  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.38 cputime=6053.243 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.0 pwm=0.000
Stats 66977.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631840 bytes_read=10465152 bytes_retransmit=9 bytes_invalid=0 send_seq=1315607 receive_seq=1315607 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007684 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128499 bytes_read=397680 bytes_retransmit=0 bytes_invalid=0 send_seq=21392 receive_seq=21392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000014 adj=49998980  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.38 cputime=6053.260 memavail=3268108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.7 pwm=0.000
Stats 66978.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631846 bytes_read=10465273 bytes_retransmit=9 bytes_invalid=0 send_seq=1315608 receive_seq=1315608 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128505 bytes_read=397696 bytes_retransmit=0 bytes_invalid=0 send_seq=21393 receive_seq=21393 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000013 adj=49998986  heater_bed: target=0 temp=54.3 pwm=0.000 sysload=0.38 cputime=6053.277 memavail=3267856 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.3 pwm=0.000
Stats 66979.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631852 bytes_read=10465408 bytes_retransmit=9 bytes_invalid=0 send_seq=1315609 receive_seq=1315609 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007674 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128511 bytes_read=397725 bytes_retransmit=0 bytes_invalid=0 send_seq=21394 receive_seq=21394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000011 adj=49998991  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.38 cputime=6053.295 memavail=3267856 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.9 pwm=0.000
Stats 66980.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631858 bytes_read=10465513 bytes_retransmit=9 bytes_invalid=0 send_seq=1315610 receive_seq=1315610 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128517 bytes_read=397741 bytes_retransmit=0 bytes_invalid=0 send_seq=21395 receive_seq=21395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000005 adj=49998983  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.35 cputime=6053.310 memavail=3268116 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.5 pwm=0.000
Stats 66981.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631864 bytes_read=10465629 bytes_retransmit=9 bytes_invalid=0 send_seq=1315611 receive_seq=1315611 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007672 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128523 bytes_read=397757 bytes_retransmit=0 bytes_invalid=0 send_seq=21396 receive_seq=21396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000006 adj=49998921  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.35 cputime=6053.325 memavail=3268116 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.2 pwm=0.000
Stats 66982.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631870 bytes_read=10465750 bytes_retransmit=9 bytes_invalid=0 send_seq=1315612 receive_seq=1315612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128529 bytes_read=397773 bytes_retransmit=0 bytes_invalid=0 send_seq=21397 receive_seq=21397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000005 adj=49998961  heater_bed: target=0 temp=54.2 pwm=0.000 sysload=0.35 cputime=6053.341 memavail=3267612 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.7 pwm=0.000
Stats 66983.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631876 bytes_read=10465856 bytes_retransmit=9 bytes_invalid=0 send_seq=1315613 receive_seq=1315613 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=128535 bytes_read=397789 bytes_retransmit=0 bytes_invalid=0 send_seq=21398 receive_seq=21398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000005 adj=49998978  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.35 cputime=6053.357 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.4 pwm=0.000
Stats 66984.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631882 bytes_read=10465991 bytes_retransmit=9 bytes_invalid=0 send_seq=1315614 receive_seq=1315614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007671 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128541 bytes_read=397818 bytes_retransmit=0 bytes_invalid=0 send_seq=21399 receive_seq=21399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000001 adj=49998996  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.35 cputime=6053.374 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.1 pwm=0.000
Stats 66985.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631888 bytes_read=10466112 bytes_retransmit=9 bytes_invalid=0 send_seq=1315615 receive_seq=1315615 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007670 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128547 bytes_read=397834 bytes_retransmit=0 bytes_invalid=0 send_seq=21400 receive_seq=21400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999997 adj=49998937  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.32 cputime=6053.390 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.6 pwm=0.000
Stats 66986.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631894 bytes_read=10466218 bytes_retransmit=9 bytes_invalid=0 send_seq=1315616 receive_seq=1315616 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128553 bytes_read=397850 bytes_retransmit=0 bytes_invalid=0 send_seq=21401 receive_seq=21401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999994 adj=49998902  heater_bed: target=0 temp=54.1 pwm=0.000 sysload=0.32 cputime=6053.408 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.3 pwm=0.000
Stats 66987.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631900 bytes_read=10466339 bytes_retransmit=9 bytes_invalid=0 send_seq=1315617 receive_seq=1315617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128559 bytes_read=397866 bytes_retransmit=0 bytes_invalid=0 send_seq=21402 receive_seq=21402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999990 adj=49998882  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.32 cputime=6053.425 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.0 pwm=0.000
Stats 66988.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631906 bytes_read=10466460 bytes_retransmit=9 bytes_invalid=0 send_seq=1315618 receive_seq=1315618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007680 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128565 bytes_read=397882 bytes_retransmit=0 bytes_invalid=0 send_seq=21403 receive_seq=21403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49998855  heater_bed: target=0 temp=54.0 pwm=0.000 sysload=0.32 cputime=6053.442 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 66989.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631912 bytes_read=10466580 bytes_retransmit=9 bytes_invalid=0 send_seq=1315619 receive_seq=1315619 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128571 bytes_read=397911 bytes_retransmit=0 bytes_invalid=0 send_seq=21404 receive_seq=21404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49998870  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.32 cputime=6053.459 memavail=3267616 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.2 pwm=0.000
Stats 66990.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631918 bytes_read=10466716 bytes_retransmit=9 bytes_invalid=0 send_seq=1315620 receive_seq=1315620 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007698 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128577 bytes_read=397927 bytes_retransmit=0 bytes_invalid=0 send_seq=21405 receive_seq=21405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000001 adj=49998875  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.29 cputime=6053.477 memavail=3267648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.8 pwm=0.000
Stats 66991.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631924 bytes_read=10466818 bytes_retransmit=9 bytes_invalid=0 send_seq=1315621 receive_seq=1315621 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007696 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128583 bytes_read=397943 bytes_retransmit=0 bytes_invalid=0 send_seq=21406 receive_seq=21406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999999 adj=49999114  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.29 cputime=6053.494 memavail=3267648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.5 pwm=0.000
Stats 66992.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631930 bytes_read=10466922 bytes_retransmit=9 bytes_invalid=0 send_seq=1315622 receive_seq=1315622 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007693 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128589 bytes_read=397959 bytes_retransmit=0 bytes_invalid=0 send_seq=21407 receive_seq=21407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999996 adj=49999064  heater_bed: target=0 temp=53.9 pwm=0.000 sysload=0.29 cputime=6053.512 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 66993.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631936 bytes_read=10467058 bytes_retransmit=9 bytes_invalid=0 send_seq=1315623 receive_seq=1315623 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128595 bytes_read=397975 bytes_retransmit=0 bytes_invalid=0 send_seq=21408 receive_seq=21408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999992 adj=49999005  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.29 cputime=6053.530 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 66994.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631942 bytes_read=10467178 bytes_retransmit=9 bytes_invalid=0 send_seq=1315624 receive_seq=1315624 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007687 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128601 bytes_read=398004 bytes_retransmit=0 bytes_invalid=0 send_seq=21409 receive_seq=21409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49998967  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.29 cputime=6053.547 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.4 pwm=0.000
Stats 66995.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631948 bytes_read=10467284 bytes_retransmit=9 bytes_invalid=0 send_seq=1315625 receive_seq=1315625 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007688 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128607 bytes_read=398020 bytes_retransmit=0 bytes_invalid=0 send_seq=21410 receive_seq=21410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999986 adj=49998944  heater_bed: target=0 temp=53.8 pwm=0.000 sysload=0.27 cputime=6053.564 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.1 pwm=0.000
Stats 66996.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631954 bytes_read=10467420 bytes_retransmit=9 bytes_invalid=0 send_seq=1315626 receive_seq=1315626 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007689 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128613 bytes_read=398036 bytes_retransmit=0 bytes_invalid=0 send_seq=21411 receive_seq=21411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999981 adj=49998907  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.27 cputime=6053.580 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.7 pwm=0.000
Stats 66997.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631960 bytes_read=10467526 bytes_retransmit=9 bytes_invalid=0 send_seq=1315627 receive_seq=1315627 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007717 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128619 bytes_read=398052 bytes_retransmit=0 bytes_invalid=0 send_seq=21412 receive_seq=21412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999985 adj=49998854  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.27 cputime=6053.597 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.4 pwm=0.000
Stats 66998.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631966 bytes_read=10467632 bytes_retransmit=9 bytes_invalid=0 send_seq=1315628 receive_seq=1315628 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007715 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128625 bytes_read=398068 bytes_retransmit=0 bytes_invalid=0 send_seq=21413 receive_seq=21413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999982 adj=49998903  heater_bed: target=0 temp=53.7 pwm=0.000 sysload=0.27 cputime=6053.614 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.1 pwm=0.000
Stats 66999.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631972 bytes_read=10467782 bytes_retransmit=9 bytes_invalid=0 send_seq=1315629 receive_seq=1315629 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007709 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128631 bytes_read=398097 bytes_retransmit=0 bytes_invalid=0 send_seq=21414 receive_seq=21414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999981 adj=49998893  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.27 cputime=6053.632 memavail=3267396 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.7 pwm=0.000
Stats 67000.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631978 bytes_read=10467888 bytes_retransmit=9 bytes_invalid=0 send_seq=1315630 receive_seq=1315630 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007714 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128637 bytes_read=398113 bytes_retransmit=0 bytes_invalid=0 send_seq=21415 receive_seq=21415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999979 adj=49998912  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.25 cputime=6053.649 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000
Stats 67001.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631984 bytes_read=10467994 bytes_retransmit=9 bytes_invalid=0 send_seq=1315631 receive_seq=1315631 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007712 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128643 bytes_read=398129 bytes_retransmit=0 bytes_invalid=0 send_seq=21416 receive_seq=21416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999979 adj=49998906  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.25 cputime=6053.666 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.0 pwm=0.000
Stats 67002.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631990 bytes_read=10468126 bytes_retransmit=9 bytes_invalid=0 send_seq=1315632 receive_seq=1315632 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007716 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128649 bytes_read=398145 bytes_retransmit=0 bytes_invalid=0 send_seq=21417 receive_seq=21417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49998930  heater_bed: target=0 temp=53.6 pwm=0.000 sysload=0.25 cputime=6053.683 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
Stats 67003.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69631996 bytes_read=10468232 bytes_retransmit=9 bytes_invalid=0 send_seq=1315633 receive_seq=1315633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007718 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128655 bytes_read=398161 bytes_retransmit=0 bytes_invalid=0 send_seq=21418 receive_seq=21418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999975 adj=49998907  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.25 cputime=6053.699 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.3 pwm=0.000
Stats 67004.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632002 bytes_read=10468352 bytes_retransmit=9 bytes_invalid=0 send_seq=1315634 receive_seq=1315634 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007720 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128661 bytes_read=398177 bytes_retransmit=0 bytes_invalid=0 send_seq=21419 receive_seq=21419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999974 adj=49998910  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.25 cputime=6053.716 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.0 pwm=0.000
Stats 67005.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632008 bytes_read=10468488 bytes_retransmit=9 bytes_invalid=0 send_seq=1315635 receive_seq=1315635 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007721 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128667 bytes_read=398206 bytes_retransmit=0 bytes_invalid=0 send_seq=21420 receive_seq=21420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999971 adj=49998907  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.23 cputime=6053.734 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.6 pwm=0.000
Stats 67006.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632014 bytes_read=10468594 bytes_retransmit=9 bytes_invalid=0 send_seq=1315636 receive_seq=1315636 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007716 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128673 bytes_read=398222 bytes_retransmit=0 bytes_invalid=0 send_seq=21421 receive_seq=21421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999966 adj=49998886  heater_bed: target=0 temp=53.5 pwm=0.000 sysload=0.23 cputime=6053.750 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 67007.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632020 bytes_read=10468700 bytes_retransmit=9 bytes_invalid=0 send_seq=1315637 receive_seq=1315637 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007708 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128679 bytes_read=398238 bytes_retransmit=0 bytes_invalid=0 send_seq=21422 receive_seq=21422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999964 adj=49998853  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.23 cputime=6053.766 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000
Stats 67008.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632026 bytes_read=10468836 bytes_retransmit=9 bytes_invalid=0 send_seq=1315638 receive_seq=1315638 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007703 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128685 bytes_read=398254 bytes_retransmit=0 bytes_invalid=0 send_seq=21423 receive_seq=21423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999960 adj=49998875  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.23 cputime=6053.784 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.7 pwm=0.000
Stats 67009.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632032 bytes_read=10468956 bytes_retransmit=9 bytes_invalid=0 send_seq=1315639 receive_seq=1315639 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007699 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128691 bytes_read=398270 bytes_retransmit=0 bytes_invalid=0 send_seq=21424 receive_seq=21424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999957 adj=49998854  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.23 cputime=6053.801 memavail=3267656 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.4 pwm=0.000
Stats 67010.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632038 bytes_read=10469062 bytes_retransmit=9 bytes_invalid=0 send_seq=1315640 receive_seq=1315640 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007702 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=128697 bytes_read=398299 bytes_retransmit=0 bytes_invalid=0 send_seq=21425 receive_seq=21425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999960 adj=49998849  heater_bed: target=0 temp=53.4 pwm=0.000 sysload=0.21 cputime=6053.814 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.1 pwm=0.000
Stats 67011.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632044 bytes_read=10469198 bytes_retransmit=9 bytes_invalid=0 send_seq=1315641 receive_seq=1315641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007686 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=128703 bytes_read=398315 bytes_retransmit=0 bytes_invalid=0 send_seq=21426 receive_seq=21426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49998919  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.21 cputime=6053.822 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.7 pwm=0.000
Stats 67012.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632050 bytes_read=10469304 bytes_retransmit=9 bytes_invalid=0 send_seq=1315642 receive_seq=1315642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=128709 bytes_read=398330 bytes_retransmit=0 bytes_invalid=0 send_seq=21427 receive_seq=21427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999950 adj=49998886  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.21 cputime=6053.831 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 67013.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632056 bytes_read=10469405 bytes_retransmit=9 bytes_invalid=0 send_seq=1315643 receive_seq=1315643 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007665 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=128715 bytes_read=398345 bytes_retransmit=0 bytes_invalid=0 send_seq=21428 receive_seq=21428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999947 adj=49998868  heater_bed: target=0 temp=53.3 pwm=0.000 sysload=0.21 cputime=6053.840 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.2 pwm=0.000
Stats 67014.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632062 bytes_read=10469555 bytes_retransmit=9 bytes_invalid=0 send_seq=1315644 receive_seq=1315644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007657 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=128721 bytes_read=398360 bytes_retransmit=0 bytes_invalid=0 send_seq=21429 receive_seq=21429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999943 adj=49998863  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.21 cputime=6053.849 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.8 pwm=0.000
Stats 67015.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632068 bytes_read=10469661 bytes_retransmit=9 bytes_invalid=0 send_seq=1315645 receive_seq=1315645 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007646 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=128727 bytes_read=398388 bytes_retransmit=0 bytes_invalid=0 send_seq=21430 receive_seq=21430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999939 adj=49998847  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.19 cputime=6053.863 memavail=3268168 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.5 pwm=0.000
Stats 67016.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632074 bytes_read=10469782 bytes_retransmit=9 bytes_invalid=0 send_seq=1315646 receive_seq=1315646 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007651 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=128733 bytes_read=398403 bytes_retransmit=0 bytes_invalid=0 send_seq=21431 receive_seq=21431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998837  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.19 cputime=6053.881 memavail=3267916 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.2 pwm=0.000
Stats 67017.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632080 bytes_read=10469903 bytes_retransmit=9 bytes_invalid=0 send_seq=1315647 receive_seq=1315647 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007656 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=128739 bytes_read=398419 bytes_retransmit=0 bytes_invalid=0 send_seq=21432 receive_seq=21432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999959 adj=49998887  heater_bed: target=0 temp=53.2 pwm=0.000 sysload=0.19 cputime=6053.899 memavail=3267920 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.9 pwm=0.000
Stats 67018.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632092 bytes_read=10470025 bytes_retransmit=9 bytes_invalid=0 send_seq=1315649 receive_seq=1315649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=128751 bytes_read=398451 bytes_retransmit=0 bytes_invalid=0 send_seq=21434 receive_seq=21434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999967 adj=49999205  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.19 cputime=6053.918 memavail=3267920 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000
Stats 67019.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632098 bytes_read=10470160 bytes_retransmit=9 bytes_invalid=0 send_seq=1315650 receive_seq=1315650 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007675 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=128757 bytes_read=398467 bytes_retransmit=0 bytes_invalid=0 send_seq=21435 receive_seq=21435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999962 adj=49999236  heater_bed: target=0 temp=53.1 pwm=0.000 sysload=0.19 cputime=6053.935 memavail=3267920 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.3 pwm=0.000
Stats 67020.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632104 bytes_read=10470281 bytes_retransmit=9 bytes_invalid=0 send_seq=1315651 receive_seq=1315651 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128763 bytes_read=398496 bytes_retransmit=0 bytes_invalid=0 send_seq=21436 receive_seq=21436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999961 adj=49999110  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.18 cputime=6053.953 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.0 pwm=0.000
Stats 67021.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632110 bytes_read=10470387 bytes_retransmit=9 bytes_invalid=0 send_seq=1315652 receive_seq=1315652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128769 bytes_read=398512 bytes_retransmit=0 bytes_invalid=0 send_seq=21437 receive_seq=21437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999958 adj=49999064  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.18 cputime=6053.969 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.7 pwm=0.000
Stats 67022.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632116 bytes_read=10470508 bytes_retransmit=9 bytes_invalid=0 send_seq=1315653 receive_seq=1315653 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128775 bytes_read=398528 bytes_retransmit=0 bytes_invalid=0 send_seq=21438 receive_seq=21438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49999020  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.18 cputime=6053.988 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000
Stats 67023.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632122 bytes_read=10470626 bytes_retransmit=9 bytes_invalid=0 send_seq=1315654 receive_seq=1315654 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007664 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128781 bytes_read=398544 bytes_retransmit=0 bytes_invalid=0 send_seq=21439 receive_seq=21439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999967 adj=49998958  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=0.18 cputime=6054.006 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.1 pwm=0.000
Stats 67024.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632128 bytes_read=10470744 bytes_retransmit=9 bytes_invalid=0 send_seq=1315655 receive_seq=1315655 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128787 bytes_read=398560 bytes_retransmit=0 bytes_invalid=0 send_seq=21440 receive_seq=21440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999965 adj=49999170  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.18 cputime=6054.023 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.8 pwm=0.000
Stats 67025.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632134 bytes_read=10470865 bytes_retransmit=9 bytes_invalid=0 send_seq=1315656 receive_seq=1315656 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007673 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128793 bytes_read=398589 bytes_retransmit=0 bytes_invalid=0 send_seq=21441 receive_seq=21441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49999096  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.16 cputime=6054.041 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.6 pwm=0.000
Stats 67026.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632153 bytes_read=10470991 bytes_retransmit=9 bytes_invalid=0 send_seq=1315658 receive_seq=1315658 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007681 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128799 bytes_read=398605 bytes_retransmit=0 bytes_invalid=0 send_seq=21442 receive_seq=21442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999980 adj=49999231  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.16 cputime=6054.060 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
Stats 67027.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632159 bytes_read=10471097 bytes_retransmit=9 bytes_invalid=0 send_seq=1315659 receive_seq=1315659 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007680 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128805 bytes_read=398621 bytes_retransmit=0 bytes_invalid=0 send_seq=21443 receive_seq=21443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999982 adj=49999221  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=0.16 cputime=6054.077 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.0 pwm=0.000
Stats 67028.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632165 bytes_read=10471218 bytes_retransmit=9 bytes_invalid=0 send_seq=1315660 receive_seq=1315660 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128811 bytes_read=398637 bytes_retransmit=0 bytes_invalid=0 send_seq=21444 receive_seq=21444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999983 adj=49999213  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.16 cputime=6054.095 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.7 pwm=0.000
Stats 67029.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632171 bytes_read=10471353 bytes_retransmit=9 bytes_invalid=0 send_seq=1315661 receive_seq=1315661 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007678 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=128817 bytes_read=398653 bytes_retransmit=0 bytes_invalid=0 send_seq=21445 receive_seq=21445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999980 adj=49999185  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.16 cputime=6054.113 memavail=3267672 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.4 pwm=0.000
Stats 67030.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632177 bytes_read=10471459 bytes_retransmit=9 bytes_invalid=0 send_seq=1315662 receive_seq=1315662 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007676 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128823 bytes_read=398682 bytes_retransmit=0 bytes_invalid=0 send_seq=21446 receive_seq=21446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999978 adj=49999098  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.23 cputime=6054.130 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.2 pwm=0.000
Stats 67031.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632183 bytes_read=10471580 bytes_retransmit=9 bytes_invalid=0 send_seq=1315663 receive_seq=1315663 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128829 bytes_read=398698 bytes_retransmit=0 bytes_invalid=0 send_seq=21447 receive_seq=21447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999974 adj=49999042  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.23 cputime=6054.147 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.0 pwm=0.000
Stats 67032.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632189 bytes_read=10471701 bytes_retransmit=9 bytes_invalid=0 send_seq=1315664 receive_seq=1315664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128835 bytes_read=398714 bytes_retransmit=0 bytes_invalid=0 send_seq=21448 receive_seq=21448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999972 adj=49998998  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=0.23 cputime=6054.165 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.7 pwm=0.000
Stats 67033.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632195 bytes_read=10471807 bytes_retransmit=9 bytes_invalid=0 send_seq=1315665 receive_seq=1315665 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007666 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128841 bytes_read=398730 bytes_retransmit=0 bytes_invalid=0 send_seq=21449 receive_seq=21449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999970 adj=49998972  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.23 cputime=6054.181 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.5 pwm=0.000
Stats 67034.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632201 bytes_read=10471937 bytes_retransmit=9 bytes_invalid=0 send_seq=1315666 receive_seq=1315666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=128847 bytes_read=398746 bytes_retransmit=0 bytes_invalid=0 send_seq=21450 receive_seq=21450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999966 adj=49998948  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=0.23 cputime=6054.198 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.3 pwm=0.000
Stats 67035.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632207 bytes_read=10472058 bytes_retransmit=9 bytes_invalid=0 send_seq=1315667 receive_seq=1315667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007663 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128853 bytes_read=398775 bytes_retransmit=0 bytes_invalid=0 send_seq=21451 receive_seq=21451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999963 adj=49998910  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.21 cputime=6054.216 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000
Stats 67036.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632213 bytes_read=10472164 bytes_retransmit=9 bytes_invalid=0 send_seq=1315668 receive_seq=1315668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007668 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128859 bytes_read=398791 bytes_retransmit=0 bytes_invalid=0 send_seq=21452 receive_seq=21452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999970 adj=49998882  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.21 cputime=6054.232 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.9 pwm=0.000
Stats 67037.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632219 bytes_read=10472285 bytes_retransmit=9 bytes_invalid=0 send_seq=1315669 receive_seq=1315669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007667 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128865 bytes_read=398807 bytes_retransmit=0 bytes_invalid=0 send_seq=21453 receive_seq=21453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999966 adj=49999021  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.21 cputime=6054.249 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.7 pwm=0.000
Stats 67038.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632225 bytes_read=10472406 bytes_retransmit=9 bytes_invalid=0 send_seq=1315670 receive_seq=1315670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007685 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128871 bytes_read=398823 bytes_retransmit=0 bytes_invalid=0 send_seq=21454 receive_seq=21454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999971 adj=49998960  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=0.21 cputime=6054.267 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.4 pwm=0.000
Stats 67039.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632231 bytes_read=10472512 bytes_retransmit=9 bytes_invalid=0 send_seq=1315671 receive_seq=1315671 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007691 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=128877 bytes_read=398839 bytes_retransmit=0 bytes_invalid=0 send_seq=21455 receive_seq=21455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49999007  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.21 cputime=6054.284 memavail=3268940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000
Stats 67040.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632237 bytes_read=10472647 bytes_retransmit=9 bytes_invalid=0 send_seq=1315672 receive_seq=1315672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007705 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128883 bytes_read=398868 bytes_retransmit=0 bytes_invalid=0 send_seq=21456 receive_seq=21456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49998962  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.19 cputime=6054.303 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.0 pwm=0.000
Stats 67041.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632243 bytes_read=10472768 bytes_retransmit=9 bytes_invalid=0 send_seq=1315673 receive_seq=1315673 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007705 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128889 bytes_read=398884 bytes_retransmit=0 bytes_invalid=0 send_seq=21457 receive_seq=21457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999977 adj=49999057  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.19 cputime=6054.320 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 67042.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632249 bytes_read=10472874 bytes_retransmit=9 bytes_invalid=0 send_seq=1315674 receive_seq=1315674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007703 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128895 bytes_read=398900 bytes_retransmit=0 bytes_invalid=0 send_seq=21458 receive_seq=21458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999977 adj=49999068  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=0.19 cputime=6054.336 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.6 pwm=0.000
Stats 67043.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632255 bytes_read=10472995 bytes_retransmit=9 bytes_invalid=0 send_seq=1315675 receive_seq=1315675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007707 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128901 bytes_read=398916 bytes_retransmit=0 bytes_invalid=0 send_seq=21459 receive_seq=21459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999970 adj=49999051  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.19 cputime=6054.354 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.5 pwm=0.000
Stats 67044.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632261 bytes_read=10473116 bytes_retransmit=9 bytes_invalid=0 send_seq=1315676 receive_seq=1315676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007710 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=128907 bytes_read=398932 bytes_retransmit=0 bytes_invalid=0 send_seq=21460 receive_seq=21460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49998924  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.19 cputime=6054.371 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000
Stats 67045.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632267 bytes_read=10473230 bytes_retransmit=9 bytes_invalid=0 send_seq=1315677 receive_seq=1315677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007727 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128913 bytes_read=398961 bytes_retransmit=0 bytes_invalid=0 send_seq=21461 receive_seq=21461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999967 adj=49998933  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=0.18 cputime=6054.387 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 67046.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632273 bytes_read=10473351 bytes_retransmit=9 bytes_invalid=0 send_seq=1315678 receive_seq=1315678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007726 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128919 bytes_read=398977 bytes_retransmit=0 bytes_invalid=0 send_seq=21462 receive_seq=21462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999965 adj=49998882  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.18 cputime=6054.404 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.9 pwm=0.000
Stats 67047.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632279 bytes_read=10473472 bytes_retransmit=9 bytes_invalid=0 send_seq=1315679 receive_seq=1315679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007725 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128925 bytes_read=398993 bytes_retransmit=0 bytes_invalid=0 send_seq=21463 receive_seq=21463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49998881  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.18 cputime=6054.420 memavail=3268192 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.7 pwm=0.000
Stats 67048.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632285 bytes_read=10473578 bytes_retransmit=9 bytes_invalid=0 send_seq=1315680 receive_seq=1315680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007724 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128931 bytes_read=399009 bytes_retransmit=0 bytes_invalid=0 send_seq=21464 receive_seq=21464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999964 adj=49998976  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.18 cputime=6054.437 memavail=3268196 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.5 pwm=0.000
Stats 67049.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632291 bytes_read=10473699 bytes_retransmit=9 bytes_invalid=0 send_seq=1315681 receive_seq=1315681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007721 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128937 bytes_read=399025 bytes_retransmit=0 bytes_invalid=0 send_seq=21465 receive_seq=21465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999959 adj=49998905  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.18 cputime=6054.454 memavail=3268196 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000
Stats 67050.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632297 bytes_read=10473834 bytes_retransmit=9 bytes_invalid=0 send_seq=1315682 receive_seq=1315682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007722 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=128943 bytes_read=399054 bytes_retransmit=0 bytes_invalid=0 send_seq=21466 receive_seq=21466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999961 adj=49998861  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=0.16 cputime=6054.472 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.2 pwm=0.000
Stats 67051.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632303 bytes_read=10473940 bytes_retransmit=9 bytes_invalid=0 send_seq=1315683 receive_seq=1315683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007728 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=128949 bytes_read=399070 bytes_retransmit=0 bytes_invalid=0 send_seq=21467 receive_seq=21467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999960 adj=49998918  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.16 cputime=6054.489 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
Stats 67052.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632309 bytes_read=10474061 bytes_retransmit=9 bytes_invalid=0 send_seq=1315684 receive_seq=1315684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=128955 bytes_read=399086 bytes_retransmit=0 bytes_invalid=0 send_seq=21468 receive_seq=21468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999959 adj=49998908  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.16 cputime=6054.509 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.8 pwm=0.000
Stats 67053.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632315 bytes_read=10474182 bytes_retransmit=9 bytes_invalid=0 send_seq=1315685 receive_seq=1315685 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007763 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=128961 bytes_read=399102 bytes_retransmit=0 bytes_invalid=0 send_seq=21469 receive_seq=21469 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999960 adj=49998915  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=0.16 cputime=6054.526 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 67054.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632321 bytes_read=10474288 bytes_retransmit=9 bytes_invalid=0 send_seq=1315686 receive_seq=1315686 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=128967 bytes_read=399118 bytes_retransmit=0 bytes_invalid=0 send_seq=21470 receive_seq=21470 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999956 adj=49998890  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.16 cputime=6054.542 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.5 pwm=0.000
Stats 67055.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632327 bytes_read=10474422 bytes_retransmit=9 bytes_invalid=0 send_seq=1315687 receive_seq=1315687 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128973 bytes_read=399147 bytes_retransmit=0 bytes_invalid=0 send_seq=21471 receive_seq=21471 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49998844  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.15 cputime=6054.560 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.3 pwm=0.000
Stats 67056.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632333 bytes_read=10474539 bytes_retransmit=9 bytes_invalid=0 send_seq=1315688 receive_seq=1315688 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007766 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128979 bytes_read=399163 bytes_retransmit=0 bytes_invalid=0 send_seq=21472 receive_seq=21472 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999948 adj=49998815  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.15 cputime=6054.578 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.1 pwm=0.000
Stats 67057.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632339 bytes_read=10474645 bytes_retransmit=9 bytes_invalid=0 send_seq=1315689 receive_seq=1315689 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007762 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128985 bytes_read=399179 bytes_retransmit=0 bytes_invalid=0 send_seq=21473 receive_seq=21473 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999944 adj=49998798  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=0.15 cputime=6054.594 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000
Stats 67058.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632345 bytes_read=10474766 bytes_retransmit=9 bytes_invalid=0 send_seq=1315690 receive_seq=1315690 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128991 bytes_read=399195 bytes_retransmit=0 bytes_invalid=0 send_seq=21474 receive_seq=21474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999939 adj=49998791  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.15 cputime=6054.611 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 67059.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632351 bytes_read=10474887 bytes_retransmit=9 bytes_invalid=0 send_seq=1315691 receive_seq=1315691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=128997 bytes_read=399211 bytes_retransmit=0 bytes_invalid=0 send_seq=21475 receive_seq=21475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998761  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.15 cputime=6054.628 memavail=3268200 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 67060.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632357 bytes_read=10475007 bytes_retransmit=9 bytes_invalid=0 send_seq=1315692 receive_seq=1315692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129003 bytes_read=399240 bytes_retransmit=0 bytes_invalid=0 send_seq=21476 receive_seq=21476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998844  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.14 cputime=6054.644 memavail=3267700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.5 pwm=0.000
Stats 67061.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632363 bytes_read=10475128 bytes_retransmit=9 bytes_invalid=0 send_seq=1315693 receive_seq=1315693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129009 bytes_read=399256 bytes_retransmit=0 bytes_invalid=0 send_seq=21477 receive_seq=21477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999939 adj=49998881  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.14 cputime=6054.662 memavail=3267700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
Stats 67062.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632369 bytes_read=10475249 bytes_retransmit=9 bytes_invalid=0 send_seq=1315694 receive_seq=1315694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007745 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129015 bytes_read=399272 bytes_retransmit=0 bytes_invalid=0 send_seq=21478 receive_seq=21478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999939 adj=49998882  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.14 cputime=6054.678 memavail=3267448 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.2 pwm=0.000
Stats 67063.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632375 bytes_read=10475355 bytes_retransmit=9 bytes_invalid=0 send_seq=1315695 receive_seq=1315695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129021 bytes_read=399288 bytes_retransmit=0 bytes_invalid=0 send_seq=21479 receive_seq=21479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999939 adj=49998918  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.14 cputime=6054.695 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.0 pwm=0.000
Stats 67064.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632381 bytes_read=10475476 bytes_retransmit=9 bytes_invalid=0 send_seq=1315696 receive_seq=1315696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007738 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129027 bytes_read=399304 bytes_retransmit=0 bytes_invalid=0 send_seq=21480 receive_seq=21480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999938 adj=49998946  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.14 cputime=6054.711 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 67065.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632387 bytes_read=10475611 bytes_retransmit=9 bytes_invalid=0 send_seq=1315697 receive_seq=1315697 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129033 bytes_read=399333 bytes_retransmit=0 bytes_invalid=0 send_seq=21481 receive_seq=21481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999941 adj=49998934  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.13 cputime=6054.728 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.7 pwm=0.000
Stats 67066.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632393 bytes_read=10475715 bytes_retransmit=9 bytes_invalid=0 send_seq=1315698 receive_seq=1315698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007763 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129039 bytes_read=399349 bytes_retransmit=0 bytes_invalid=0 send_seq=21482 receive_seq=21482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999956 adj=49998980  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=6054.746 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.6 pwm=0.000
Stats 67067.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632399 bytes_read=10475833 bytes_retransmit=9 bytes_invalid=0 send_seq=1315699 receive_seq=1315699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007793 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129045 bytes_read=399365 bytes_retransmit=0 bytes_invalid=0 send_seq=21483 receive_seq=21483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999955 adj=49999170  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=6054.763 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.4 pwm=0.000
Stats 67068.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632405 bytes_read=10475954 bytes_retransmit=9 bytes_invalid=0 send_seq=1315700 receive_seq=1315700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007786 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129051 bytes_read=399381 bytes_retransmit=0 bytes_invalid=0 send_seq=21484 receive_seq=21484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999970 adj=49999055  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=6054.779 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.2 pwm=0.000
Stats 67069.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632411 bytes_read=10476060 bytes_retransmit=9 bytes_invalid=0 send_seq=1315701 receive_seq=1315701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007777 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129057 bytes_read=399397 bytes_retransmit=0 bytes_invalid=0 send_seq=21485 receive_seq=21485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49999288  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.13 cputime=6054.795 memavail=3267452 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.1 pwm=0.000
Stats 67070.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632417 bytes_read=10476195 bytes_retransmit=9 bytes_invalid=0 send_seq=1315702 receive_seq=1315702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007777 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129063 bytes_read=399426 bytes_retransmit=0 bytes_invalid=0 send_seq=21486 receive_seq=21486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999965 adj=49999217  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.20 cputime=6054.812 memavail=3266952 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.0 pwm=0.000
Stats 67071.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632423 bytes_read=10476316 bytes_retransmit=9 bytes_invalid=0 send_seq=1315703 receive_seq=1315703 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129069 bytes_read=399442 bytes_retransmit=0 bytes_invalid=0 send_seq=21487 receive_seq=21487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999968 adj=49999102  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.20 cputime=6054.829 memavail=3266952 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 67072.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632429 bytes_read=10476422 bytes_retransmit=9 bytes_invalid=0 send_seq=1315704 receive_seq=1315704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007778 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129075 bytes_read=399458 bytes_retransmit=0 bytes_invalid=0 send_seq=21488 receive_seq=21488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999983 adj=49999115  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.20 cputime=6054.846 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000
Stats 67073.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632435 bytes_read=10476543 bytes_retransmit=9 bytes_invalid=0 send_seq=1315705 receive_seq=1315705 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129081 bytes_read=399474 bytes_retransmit=0 bytes_invalid=0 send_seq=21489 receive_seq=21489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49999317  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.20 cputime=6054.864 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.5 pwm=0.000
Stats 67074.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632441 bytes_read=10476664 bytes_retransmit=9 bytes_invalid=0 send_seq=1315706 receive_seq=1315706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129087 bytes_read=399490 bytes_retransmit=0 bytes_invalid=0 send_seq=21490 receive_seq=21490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49999145  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.20 cputime=6054.880 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.4 pwm=0.000
Stats 67075.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632447 bytes_read=10476784 bytes_retransmit=9 bytes_invalid=0 send_seq=1315707 receive_seq=1315707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129093 bytes_read=399519 bytes_retransmit=0 bytes_invalid=0 send_seq=21491 receive_seq=21491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999962 adj=49999024  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.26 cputime=6054.897 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.2 pwm=0.000
Stats 67076.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632453 bytes_read=10476905 bytes_retransmit=9 bytes_invalid=0 send_seq=1315708 receive_seq=1315708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129099 bytes_read=399535 bytes_retransmit=0 bytes_invalid=0 send_seq=21492 receive_seq=21492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999955 adj=49998888  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.26 cputime=6054.914 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.1 pwm=0.000
Stats 67077.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632459 bytes_read=10477021 bytes_retransmit=9 bytes_invalid=0 send_seq=1315709 receive_seq=1315709 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007754 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129105 bytes_read=399551 bytes_retransmit=0 bytes_invalid=0 send_seq=21493 receive_seq=21493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999955 adj=49998820  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.26 cputime=6054.931 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.9 pwm=0.000
Stats 67078.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632465 bytes_read=10477126 bytes_retransmit=9 bytes_invalid=0 send_seq=1315710 receive_seq=1315710 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007778 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129111 bytes_read=399567 bytes_retransmit=0 bytes_invalid=0 send_seq=21494 receive_seq=21494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49998876  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.26 cputime=6054.948 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.8 pwm=0.000
Stats 67079.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632471 bytes_read=10477247 bytes_retransmit=9 bytes_invalid=0 send_seq=1315711 receive_seq=1315711 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129117 bytes_read=399583 bytes_retransmit=0 bytes_invalid=0 send_seq=21495 receive_seq=21495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999949 adj=49998813  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.26 cputime=6054.966 memavail=3266700 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.7 pwm=0.000
Stats 67080.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632483 bytes_read=10477398 bytes_retransmit=9 bytes_invalid=0 send_seq=1315713 receive_seq=1315713 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129129 bytes_read=399628 bytes_retransmit=0 bytes_invalid=0 send_seq=21497 receive_seq=21497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999957 adj=49998797  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.32 cputime=6054.984 memavail=3266456 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000
Stats 67081.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632489 bytes_read=10477504 bytes_retransmit=9 bytes_invalid=0 send_seq=1315714 receive_seq=1315714 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007776 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129135 bytes_read=399644 bytes_retransmit=0 bytes_invalid=0 send_seq=21498 receive_seq=21498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999956 adj=49998964  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.32 cputime=6055.000 memavail=3266456 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.4 pwm=0.000
Stats 67082.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632495 bytes_read=10477625 bytes_retransmit=9 bytes_invalid=0 send_seq=1315715 receive_seq=1315715 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129141 bytes_read=399660 bytes_retransmit=0 bytes_invalid=0 send_seq=21499 receive_seq=21499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49998965  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.32 cputime=6055.019 memavail=3266456 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 67083.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632501 bytes_read=10477746 bytes_retransmit=9 bytes_invalid=0 send_seq=1315716 receive_seq=1315716 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007766 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129147 bytes_read=399676 bytes_retransmit=0 bytes_invalid=0 send_seq=21500 receive_seq=21500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999949 adj=49998949  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.32 cputime=6055.035 memavail=3266456 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.1 pwm=0.000
Stats 67084.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632507 bytes_read=10477852 bytes_retransmit=9 bytes_invalid=0 send_seq=1315717 receive_seq=1315717 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007756 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129153 bytes_read=399692 bytes_retransmit=0 bytes_invalid=0 send_seq=21501 receive_seq=21501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999946 adj=49998894  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.32 cputime=6055.052 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.0 pwm=0.000
Stats 67085.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632513 bytes_read=10477987 bytes_retransmit=9 bytes_invalid=0 send_seq=1315718 receive_seq=1315718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007752 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129159 bytes_read=399721 bytes_retransmit=0 bytes_invalid=0 send_seq=21502 receive_seq=21502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998886  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.29 cputime=6055.070 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.9 pwm=0.000
Stats 67086.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632519 bytes_read=10478108 bytes_retransmit=9 bytes_invalid=0 send_seq=1315719 receive_seq=1315719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007744 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129165 bytes_read=399737 bytes_retransmit=0 bytes_invalid=0 send_seq=21503 receive_seq=21503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999935 adj=49998823  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.29 cputime=6055.086 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 67087.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632525 bytes_read=10478214 bytes_retransmit=9 bytes_invalid=0 send_seq=1315720 receive_seq=1315720 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129171 bytes_read=399753 bytes_retransmit=0 bytes_invalid=0 send_seq=21504 receive_seq=21504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999930 adj=49998800  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.29 cputime=6055.103 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 67088.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632531 bytes_read=10478329 bytes_retransmit=9 bytes_invalid=0 send_seq=1315721 receive_seq=1315721 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129177 bytes_read=399769 bytes_retransmit=0 bytes_invalid=0 send_seq=21505 receive_seq=21505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999927 adj=49998773  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.29 cputime=6055.120 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.5 pwm=0.000
Stats 67089.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632537 bytes_read=10478450 bytes_retransmit=9 bytes_invalid=0 send_seq=1315722 receive_seq=1315722 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129183 bytes_read=399785 bytes_retransmit=0 bytes_invalid=0 send_seq=21506 receive_seq=21506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999924 adj=49998771  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.29 cputime=6055.135 memavail=3266460 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.3 pwm=0.000
Stats 67090.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632543 bytes_read=10478570 bytes_retransmit=9 bytes_invalid=0 send_seq=1315723 receive_seq=1315723 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007770 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129189 bytes_read=399814 bytes_retransmit=0 bytes_invalid=0 send_seq=21507 receive_seq=21507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999931 adj=49998718  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.27 cputime=6055.151 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000
Stats 67091.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632549 bytes_read=10478691 bytes_retransmit=9 bytes_invalid=0 send_seq=1315724 receive_seq=1315724 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129195 bytes_read=399830 bytes_retransmit=0 bytes_invalid=0 send_seq=21508 receive_seq=21508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999927 adj=49998885  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.27 cputime=6055.168 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
Stats 67092.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632555 bytes_read=10478812 bytes_retransmit=9 bytes_invalid=0 send_seq=1315725 receive_seq=1315725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007769 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129201 bytes_read=399846 bytes_retransmit=0 bytes_invalid=0 send_seq=21509 receive_seq=21509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999935 adj=49998846  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.27 cputime=6055.185 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 67093.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632561 bytes_read=10478918 bytes_retransmit=9 bytes_invalid=0 send_seq=1315726 receive_seq=1315726 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007769 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129207 bytes_read=399862 bytes_retransmit=0 bytes_invalid=0 send_seq=21510 receive_seq=21510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999932 adj=49998993  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.27 cputime=6055.202 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000
Stats 67094.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632567 bytes_read=10479039 bytes_retransmit=9 bytes_invalid=0 send_seq=1315727 receive_seq=1315727 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129213 bytes_read=399878 bytes_retransmit=0 bytes_invalid=0 send_seq=21511 receive_seq=21511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999930 adj=49998937  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.27 cputime=6055.219 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.7 pwm=0.000
Stats 67095.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632573 bytes_read=10479174 bytes_retransmit=9 bytes_invalid=0 send_seq=1315728 receive_seq=1315728 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007769 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=129219 bytes_read=399907 bytes_retransmit=0 bytes_invalid=0 send_seq=21512 receive_seq=21512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999945 adj=49998901  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.25 cputime=6055.238 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 67096.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632579 bytes_read=10479280 bytes_retransmit=9 bytes_invalid=0 send_seq=1315729 receive_seq=1315729 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007767 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=129225 bytes_read=399923 bytes_retransmit=0 bytes_invalid=0 send_seq=21513 receive_seq=21513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49999157  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.25 cputime=6055.254 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.4 pwm=0.000
Stats 67097.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632585 bytes_read=10479401 bytes_retransmit=9 bytes_invalid=0 send_seq=1315730 receive_seq=1315730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007762 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=129231 bytes_read=399938 bytes_retransmit=0 bytes_invalid=0 send_seq=21514 receive_seq=21514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999951 adj=49999268  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.25 cputime=6055.270 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 67098.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632591 bytes_read=10479520 bytes_retransmit=9 bytes_invalid=0 send_seq=1315731 receive_seq=1315731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007756 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=129237 bytes_read=399953 bytes_retransmit=0 bytes_invalid=0 send_seq=21515 receive_seq=21515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999959 adj=49999147  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.25 cputime=6055.287 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.2 pwm=0.000
Stats 67099.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632597 bytes_read=10479622 bytes_retransmit=9 bytes_invalid=0 send_seq=1315732 receive_seq=1315732 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007752 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=129243 bytes_read=399968 bytes_retransmit=0 bytes_invalid=0 send_seq=21516 receive_seq=21516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999955 adj=49999242  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.25 cputime=6055.303 memavail=3266472 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.1 pwm=0.000
Stats 67100.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632603 bytes_read=10479757 bytes_retransmit=9 bytes_invalid=0 send_seq=1315733 receive_seq=1315733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007743 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129249 bytes_read=399996 bytes_retransmit=0 bytes_invalid=0 send_seq=21517 receive_seq=21517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999953 adj=49999130  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.23 cputime=6055.320 memavail=3265220 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.9 pwm=0.000
Stats 67101.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632609 bytes_read=10479878 bytes_retransmit=9 bytes_invalid=0 send_seq=1315734 receive_seq=1315734 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007737 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129255 bytes_read=400011 bytes_retransmit=0 bytes_invalid=0 send_seq=21518 receive_seq=21518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999947 adj=49999075  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.23 cputime=6055.337 memavail=3265220 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.8 pwm=0.000
Stats 67102.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632615 bytes_read=10479984 bytes_retransmit=9 bytes_invalid=0 send_seq=1315735 receive_seq=1315735 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007734 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129261 bytes_read=400027 bytes_retransmit=0 bytes_invalid=0 send_seq=21519 receive_seq=21519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998980  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.23 cputime=6055.353 memavail=3265220 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 67103.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632621 bytes_read=10480105 bytes_retransmit=9 bytes_invalid=0 send_seq=1315736 receive_seq=1315736 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007738 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129267 bytes_read=400043 bytes_retransmit=0 bytes_invalid=0 send_seq=21520 receive_seq=21520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999935 adj=49998871  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.23 cputime=6055.371 memavail=3265220 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.6 pwm=0.000
Stats 67104.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632627 bytes_read=10480226 bytes_retransmit=9 bytes_invalid=0 send_seq=1315737 receive_seq=1315737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007740 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129273 bytes_read=400059 bytes_retransmit=0 bytes_invalid=0 send_seq=21521 receive_seq=21521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999931 adj=49998809  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.23 cputime=6055.388 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
Stats 67105.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632633 bytes_read=10480346 bytes_retransmit=9 bytes_invalid=0 send_seq=1315738 receive_seq=1315738 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129279 bytes_read=400075 bytes_retransmit=0 bytes_invalid=0 send_seq=21522 receive_seq=21522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999927 adj=49998783  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.21 cputime=6055.404 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000
Stats 67106.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632639 bytes_read=10480467 bytes_retransmit=9 bytes_invalid=0 send_seq=1315739 receive_seq=1315739 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129285 bytes_read=400104 bytes_retransmit=0 bytes_invalid=0 send_seq=21523 receive_seq=21523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999922 adj=49998768  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.21 cputime=6055.421 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.2 pwm=0.000
Stats 67107.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632645 bytes_read=10480588 bytes_retransmit=9 bytes_invalid=0 send_seq=1315740 receive_seq=1315740 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007745 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129291 bytes_read=400120 bytes_retransmit=0 bytes_invalid=0 send_seq=21524 receive_seq=21524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999919 adj=49998741  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.21 cputime=6055.439 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
Stats 67108.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632651 bytes_read=10480694 bytes_retransmit=9 bytes_invalid=0 send_seq=1315741 receive_seq=1315741 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129297 bytes_read=400136 bytes_retransmit=0 bytes_invalid=0 send_seq=21525 receive_seq=21525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999917 adj=49998740  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.21 cputime=6055.456 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.9 pwm=0.000
Stats 67109.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632657 bytes_read=10480812 bytes_retransmit=9 bytes_invalid=0 send_seq=1315742 receive_seq=1315742 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129303 bytes_read=400152 bytes_retransmit=0 bytes_invalid=0 send_seq=21526 receive_seq=21526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999916 adj=49998765  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.21 cputime=6055.473 memavail=3265224 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 67110.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632663 bytes_read=10480946 bytes_retransmit=9 bytes_invalid=0 send_seq=1315743 receive_seq=1315743 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129309 bytes_read=400168 bytes_retransmit=0 bytes_invalid=0 send_seq=21527 receive_seq=21527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999919 adj=49998780  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.19 cputime=6055.490 memavail=3265756 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.7 pwm=0.000
Stats 67111.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632669 bytes_read=10481052 bytes_retransmit=9 bytes_invalid=0 send_seq=1315744 receive_seq=1315744 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007737 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129315 bytes_read=400197 bytes_retransmit=0 bytes_invalid=0 send_seq=21528 receive_seq=21528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999914 adj=49998876  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.19 cputime=6055.507 memavail=3265756 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.6 pwm=0.000
Stats 67112.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632675 bytes_read=10481173 bytes_retransmit=9 bytes_invalid=0 send_seq=1315745 receive_seq=1315745 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007761 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129321 bytes_read=400213 bytes_retransmit=0 bytes_invalid=0 send_seq=21529 receive_seq=21529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999908 adj=49998838  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.19 cputime=6055.524 memavail=3265756 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000
Stats 67113.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632681 bytes_read=10481294 bytes_retransmit=9 bytes_invalid=0 send_seq=1315746 receive_seq=1315746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129327 bytes_read=400229 bytes_retransmit=0 bytes_invalid=0 send_seq=21530 receive_seq=21530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999903 adj=49998724  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.19 cputime=6055.542 memavail=3265756 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000
Stats 67114.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632687 bytes_read=10481400 bytes_retransmit=9 bytes_invalid=0 send_seq=1315747 receive_seq=1315747 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129333 bytes_read=400245 bytes_retransmit=0 bytes_invalid=0 send_seq=21531 receive_seq=21531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49998700  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.19 cputime=6055.558 memavail=3265756 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 67115.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632693 bytes_read=10481535 bytes_retransmit=9 bytes_invalid=0 send_seq=1315748 receive_seq=1315748 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129339 bytes_read=400261 bytes_retransmit=0 bytes_invalid=0 send_seq=21532 receive_seq=21532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999900 adj=49998740  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.18 cputime=6055.575 memavail=3265908 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.1 pwm=0.000
Stats 67116.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632699 bytes_read=10481656 bytes_retransmit=9 bytes_invalid=0 send_seq=1315749 receive_seq=1315749 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007743 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129345 bytes_read=400290 bytes_retransmit=0 bytes_invalid=0 send_seq=21533 receive_seq=21533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999899 adj=49998787  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.18 cputime=6055.592 memavail=3266012 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
Stats 67117.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632705 bytes_read=10481762 bytes_retransmit=9 bytes_invalid=0 send_seq=1315750 receive_seq=1315750 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007740 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129351 bytes_read=400306 bytes_retransmit=0 bytes_invalid=0 send_seq=21534 receive_seq=21534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999895 adj=49998804  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.18 cputime=6055.609 memavail=3266012 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000
Stats 67118.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632711 bytes_read=10481883 bytes_retransmit=9 bytes_invalid=0 send_seq=1315751 receive_seq=1315751 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007742 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129357 bytes_read=400322 bytes_retransmit=0 bytes_invalid=0 send_seq=21535 receive_seq=21535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999892 adj=49998785  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.18 cputime=6055.625 memavail=3266012 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.8 pwm=0.000
Stats 67119.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632717 bytes_read=10482004 bytes_retransmit=9 bytes_invalid=0 send_seq=1315752 receive_seq=1315752 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007745 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129363 bytes_read=400338 bytes_retransmit=0 bytes_invalid=0 send_seq=21536 receive_seq=21536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999890 adj=49998769  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.18 cputime=6055.642 memavail=3266012 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.7 pwm=0.000
Stats 67120.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632723 bytes_read=10482120 bytes_retransmit=9 bytes_invalid=0 send_seq=1315753 receive_seq=1315753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129369 bytes_read=400354 bytes_retransmit=0 bytes_invalid=0 send_seq=21537 receive_seq=21537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49998779  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.16 cputime=6055.657 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.5 pwm=0.000
Stats 67121.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632729 bytes_read=10482241 bytes_retransmit=9 bytes_invalid=0 send_seq=1315754 receive_seq=1315754 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129375 bytes_read=400383 bytes_retransmit=0 bytes_invalid=0 send_seq=21538 receive_seq=21538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999912 adj=49998859  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.16 cputime=6055.674 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 67122.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632735 bytes_read=10482362 bytes_retransmit=9 bytes_invalid=0 send_seq=1315755 receive_seq=1315755 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129381 bytes_read=400399 bytes_retransmit=0 bytes_invalid=0 send_seq=21539 receive_seq=21539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49999166  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.16 cputime=6055.691 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 67123.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632741 bytes_read=10482468 bytes_retransmit=9 bytes_invalid=0 send_seq=1315756 receive_seq=1315756 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129387 bytes_read=400415 bytes_retransmit=0 bytes_invalid=0 send_seq=21540 receive_seq=21540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999908 adj=49999092  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.16 cputime=6055.707 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.2 pwm=0.000
Stats 67124.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632747 bytes_read=10482589 bytes_retransmit=9 bytes_invalid=0 send_seq=1315757 receive_seq=1315757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007739 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129393 bytes_read=400431 bytes_retransmit=0 bytes_invalid=0 send_seq=21541 receive_seq=21541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49999024  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.16 cputime=6055.723 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.1 pwm=0.000
Stats 67125.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632753 bytes_read=10482724 bytes_retransmit=9 bytes_invalid=0 send_seq=1315758 receive_seq=1315758 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007730 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129399 bytes_read=400447 bytes_retransmit=0 bytes_invalid=0 send_seq=21542 receive_seq=21542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999904 adj=49998993  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.15 cputime=6055.740 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000
Stats 67126.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632759 bytes_read=10482830 bytes_retransmit=9 bytes_invalid=0 send_seq=1315759 receive_seq=1315759 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007724 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129405 bytes_read=400476 bytes_retransmit=0 bytes_invalid=0 send_seq=21543 receive_seq=21543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999900 adj=49998944  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.15 cputime=6055.756 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000
Stats 67127.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632765 bytes_read=10482951 bytes_retransmit=9 bytes_invalid=0 send_seq=1315760 receive_seq=1315760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007724 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129411 bytes_read=400492 bytes_retransmit=0 bytes_invalid=0 send_seq=21544 receive_seq=21544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998898  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.15 cputime=6055.773 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
Stats 67128.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632771 bytes_read=10483072 bytes_retransmit=9 bytes_invalid=0 send_seq=1315761 receive_seq=1315761 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007724 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129417 bytes_read=400508 bytes_retransmit=0 bytes_invalid=0 send_seq=21545 receive_seq=21545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49998873  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.15 cputime=6055.789 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.6 pwm=0.000
Stats 67129.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632777 bytes_read=10483178 bytes_retransmit=9 bytes_invalid=0 send_seq=1315762 receive_seq=1315762 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007716 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129423 bytes_read=400524 bytes_retransmit=0 bytes_invalid=0 send_seq=21546 receive_seq=21546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49998828  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.15 cputime=6055.805 memavail=3265764 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.5 pwm=0.000
Stats 67130.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632783 bytes_read=10483327 bytes_retransmit=9 bytes_invalid=0 send_seq=1315763 receive_seq=1315763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007714 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129429 bytes_read=400540 bytes_retransmit=0 bytes_invalid=0 send_seq=21547 receive_seq=21547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999887 adj=49998813  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.14 cputime=6055.823 memavail=3266264 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.4 pwm=0.000
Stats 67131.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632789 bytes_read=10483429 bytes_retransmit=9 bytes_invalid=0 send_seq=1315764 receive_seq=1315764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129435 bytes_read=400569 bytes_retransmit=0 bytes_invalid=0 send_seq=21548 receive_seq=21548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999892 adj=49998790  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.14 cputime=6055.840 memavail=3266280 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 67132.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632795 bytes_read=10483535 bytes_retransmit=9 bytes_invalid=0 send_seq=1315765 receive_seq=1315765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007749 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129441 bytes_read=400585 bytes_retransmit=0 bytes_invalid=0 send_seq=21549 receive_seq=21549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49998843  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.14 cputime=6055.856 memavail=3266280 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 67133.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632801 bytes_read=10483671 bytes_retransmit=9 bytes_invalid=0 send_seq=1315766 receive_seq=1315766 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007751 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129447 bytes_read=400601 bytes_retransmit=0 bytes_invalid=0 send_seq=21550 receive_seq=21550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999905 adj=49999003  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.14 cputime=6055.873 memavail=3266280 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.1 pwm=0.000
Stats 67134.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632807 bytes_read=10483777 bytes_retransmit=9 bytes_invalid=0 send_seq=1315767 receive_seq=1315767 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007752 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129453 bytes_read=400617 bytes_retransmit=0 bytes_invalid=0 send_seq=21551 receive_seq=21551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999923 adj=49999031  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.14 cputime=6055.888 memavail=3266280 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
Stats 67135.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632813 bytes_read=10483897 bytes_retransmit=9 bytes_invalid=0 send_seq=1315768 receive_seq=1315768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129459 bytes_read=400633 bytes_retransmit=0 bytes_invalid=0 send_seq=21552 receive_seq=21552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999919 adj=49999294  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.13 cputime=6055.905 memavail=3266284 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.9 pwm=0.000
Stats 67136.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632819 bytes_read=10484033 bytes_retransmit=9 bytes_invalid=0 send_seq=1315769 receive_seq=1315769 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007757 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129465 bytes_read=400662 bytes_retransmit=0 bytes_invalid=0 send_seq=21553 receive_seq=21553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999923 adj=49999123  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.13 cputime=6055.922 memavail=3266284 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
Stats 67137.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632825 bytes_read=10484139 bytes_retransmit=9 bytes_invalid=0 send_seq=1315770 receive_seq=1315770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129471 bytes_read=400678 bytes_retransmit=0 bytes_invalid=0 send_seq=21554 receive_seq=21554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999917 adj=49999150  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.13 cputime=6055.939 memavail=3266284 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
Stats 67138.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632831 bytes_read=10484245 bytes_retransmit=9 bytes_invalid=0 send_seq=1315771 receive_seq=1315771 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007762 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129477 bytes_read=400694 bytes_retransmit=0 bytes_invalid=0 send_seq=21555 receive_seq=21555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49999014  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.13 cputime=6055.954 memavail=3266284 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000
Stats 67139.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632837 bytes_read=10484381 bytes_retransmit=9 bytes_invalid=0 send_seq=1315772 receive_seq=1315772 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129483 bytes_read=400710 bytes_retransmit=0 bytes_invalid=0 send_seq=21556 receive_seq=21556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999905 adj=49998885  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.13 cputime=6055.971 memavail=3266284 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.4 pwm=0.000
Stats 67140.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632843 bytes_read=10484501 bytes_retransmit=9 bytes_invalid=0 send_seq=1315773 receive_seq=1315773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007761 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129489 bytes_read=400726 bytes_retransmit=0 bytes_invalid=0 send_seq=21557 receive_seq=21557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999905 adj=49998820  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.12 cputime=6055.987 memavail=3265720 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.3 pwm=0.000
Stats 67141.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632855 bytes_read=10484620 bytes_retransmit=9 bytes_invalid=0 send_seq=1315775 receive_seq=1315775 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007761 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=129501 bytes_read=400771 bytes_retransmit=0 bytes_invalid=0 send_seq=21559 receive_seq=21559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999899 adj=49998844  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.12 cputime=6056.005 memavail=3265784 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.2 pwm=0.000
Stats 67142.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632861 bytes_read=10484753 bytes_retransmit=9 bytes_invalid=0 send_seq=1315776 receive_seq=1315776 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=129507 bytes_read=400787 bytes_retransmit=0 bytes_invalid=0 send_seq=21560 receive_seq=21560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998770  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.12 cputime=6056.023 memavail=3265784 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000
Stats 67143.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632867 bytes_read=10484859 bytes_retransmit=9 bytes_invalid=0 send_seq=1315777 receive_seq=1315777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007751 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=129513 bytes_read=400803 bytes_retransmit=0 bytes_invalid=0 send_seq=21561 receive_seq=21561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999916 adj=49998808  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.12 cputime=6056.039 memavail=3265784 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 67144.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632873 bytes_read=10484965 bytes_retransmit=9 bytes_invalid=0 send_seq=1315778 receive_seq=1315778 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=129519 bytes_read=400819 bytes_retransmit=0 bytes_invalid=0 send_seq=21562 receive_seq=21562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999915 adj=49999128  heater_bed: target=0 temp=49.9 pwm=0.000 sysload=0.12 cputime=6056.056 memavail=3265784 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000
Stats 67145.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632879 bytes_read=10485115 bytes_retransmit=9 bytes_invalid=0 send_seq=1315779 receive_seq=1315779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007777 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=129525 bytes_read=400835 bytes_retransmit=0 bytes_invalid=0 send_seq=21563 receive_seq=21563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999910 adj=49999063  heater_bed: target=0 temp=49.9 pwm=0.000 sysload=0.11 cputime=6056.073 memavail=3265788 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 67146.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632885 bytes_read=10485221 bytes_retransmit=9 bytes_invalid=0 send_seq=1315780 receive_seq=1315780 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007785 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129531 bytes_read=400864 bytes_retransmit=0 bytes_invalid=0 send_seq=21564 receive_seq=21564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999905 adj=49998909  heater_bed: target=0 temp=49.9 pwm=0.000 sysload=0.11 cputime=6056.090 memavail=3265788 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000
Stats 67147.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632891 bytes_read=10485327 bytes_retransmit=9 bytes_invalid=0 send_seq=1315781 receive_seq=1315781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129537 bytes_read=400880 bytes_retransmit=0 bytes_invalid=0 send_seq=21565 receive_seq=21565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49998824  heater_bed: target=0 temp=49.9 pwm=0.000 sysload=0.11 cputime=6056.107 memavail=3265792 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 67148.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632897 bytes_read=10485463 bytes_retransmit=9 bytes_invalid=0 send_seq=1315782 receive_seq=1315782 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007781 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129543 bytes_read=400896 bytes_retransmit=0 bytes_invalid=0 send_seq=21566 receive_seq=21566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49998801  heater_bed: target=0 temp=49.9 pwm=0.000 sysload=0.11 cputime=6056.124 memavail=3265792 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
Stats 67149.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632903 bytes_read=10485569 bytes_retransmit=9 bytes_invalid=0 send_seq=1315783 receive_seq=1315783 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007778 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129549 bytes_read=400912 bytes_retransmit=0 bytes_invalid=0 send_seq=21567 receive_seq=21567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999903 adj=49998822  heater_bed: target=0 temp=49.8 pwm=0.000 sysload=0.11 cputime=6056.141 memavail=3265792 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.4 pwm=0.000
Stats 67150.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632909 bytes_read=10485704 bytes_retransmit=9 bytes_invalid=0 send_seq=1315784 receive_seq=1315784 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007774 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129555 bytes_read=400928 bytes_retransmit=0 bytes_invalid=0 send_seq=21568 receive_seq=21568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999905 adj=49998894  heater_bed: target=0 temp=49.8 pwm=0.000 sysload=0.10 cputime=6056.158 memavail=3264976 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000
Stats 67151.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632915 bytes_read=10485825 bytes_retransmit=9 bytes_invalid=0 send_seq=1315785 receive_seq=1315785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007801 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129561 bytes_read=400957 bytes_retransmit=0 bytes_invalid=0 send_seq=21569 receive_seq=21569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49998934  heater_bed: target=0 temp=49.8 pwm=0.000 sysload=0.10 cputime=6056.175 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 67152.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632921 bytes_read=10485926 bytes_retransmit=9 bytes_invalid=0 send_seq=1315786 receive_seq=1315786 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007824 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129567 bytes_read=400973 bytes_retransmit=0 bytes_invalid=0 send_seq=21570 receive_seq=21570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998822  heater_bed: target=0 temp=49.7 pwm=0.000 sysload=0.10 cputime=6056.191 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.1 pwm=0.000
Stats 67153.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632927 bytes_read=10486047 bytes_retransmit=9 bytes_invalid=0 send_seq=1315787 receive_seq=1315787 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007807 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129573 bytes_read=400989 bytes_retransmit=0 bytes_invalid=0 send_seq=21571 receive_seq=21571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49998763  heater_bed: target=0 temp=49.8 pwm=0.000 sysload=0.10 cputime=6056.208 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.0 pwm=0.000
Stats 67154.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632933 bytes_read=10486168 bytes_retransmit=9 bytes_invalid=0 send_seq=1315788 receive_seq=1315788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007796 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129579 bytes_read=401005 bytes_retransmit=0 bytes_invalid=0 send_seq=21572 receive_seq=21572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999893 adj=49998774  heater_bed: target=0 temp=49.7 pwm=0.000 sysload=0.10 cputime=6056.224 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 67155.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632939 bytes_read=10486288 bytes_retransmit=9 bytes_invalid=0 send_seq=1315789 receive_seq=1315789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129585 bytes_read=401021 bytes_retransmit=0 bytes_invalid=0 send_seq=21573 receive_seq=21573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49998806  heater_bed: target=0 temp=49.7 pwm=0.000 sysload=0.09 cputime=6056.239 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 67156.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632945 bytes_read=10486409 bytes_retransmit=9 bytes_invalid=0 send_seq=1315790 receive_seq=1315790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129591 bytes_read=401050 bytes_retransmit=0 bytes_invalid=0 send_seq=21574 receive_seq=21574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49998824  heater_bed: target=0 temp=49.7 pwm=0.000 sysload=0.09 cputime=6056.256 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000
Stats 67157.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632951 bytes_read=10486530 bytes_retransmit=9 bytes_invalid=0 send_seq=1315791 receive_seq=1315791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007787 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129597 bytes_read=401066 bytes_retransmit=0 bytes_invalid=0 send_seq=21575 receive_seq=21575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49998849  heater_bed: target=0 temp=49.6 pwm=0.000 sysload=0.09 cputime=6056.273 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 67158.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632957 bytes_read=10486636 bytes_retransmit=9 bytes_invalid=0 send_seq=1315792 receive_seq=1315792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007786 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129603 bytes_read=401082 bytes_retransmit=0 bytes_invalid=0 send_seq=21576 receive_seq=21576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49999123  heater_bed: target=0 temp=49.6 pwm=0.000 sysload=0.09 cputime=6056.289 memavail=3265036 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 67159.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632963 bytes_read=10486757 bytes_retransmit=9 bytes_invalid=0 send_seq=1315793 receive_seq=1315793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129609 bytes_read=401098 bytes_retransmit=0 bytes_invalid=0 send_seq=21577 receive_seq=21577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49998989  heater_bed: target=0 temp=49.6 pwm=0.000 sysload=0.09 cputime=6056.306 memavail=3264680 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.5 pwm=0.000
Stats 67160.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632969 bytes_read=10486892 bytes_retransmit=9 bytes_invalid=0 send_seq=1315794 receive_seq=1315794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129615 bytes_read=401114 bytes_retransmit=0 bytes_invalid=0 send_seq=21578 receive_seq=21578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999916 adj=49998976  heater_bed: target=0 temp=49.6 pwm=0.000 sysload=0.08 cputime=6056.324 memavail=3264940 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 67161.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632975 bytes_read=10486998 bytes_retransmit=9 bytes_invalid=0 send_seq=1315795 receive_seq=1315795 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007782 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129621 bytes_read=401143 bytes_retransmit=0 bytes_invalid=0 send_seq=21579 receive_seq=21579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999913 adj=49999200  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.08 cputime=6056.341 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 67162.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632981 bytes_read=10487119 bytes_retransmit=9 bytes_invalid=0 send_seq=1315796 receive_seq=1315796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129627 bytes_read=401159 bytes_retransmit=0 bytes_invalid=0 send_seq=21580 receive_seq=21580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49999076  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.08 cputime=6056.359 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000
Stats 67163.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632987 bytes_read=10487235 bytes_retransmit=9 bytes_invalid=0 send_seq=1315797 receive_seq=1315797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007774 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129633 bytes_read=401175 bytes_retransmit=0 bytes_invalid=0 send_seq=21581 receive_seq=21581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999906 adj=49998958  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.08 cputime=6056.377 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.1 pwm=0.000
Stats 67164.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632993 bytes_read=10487341 bytes_retransmit=9 bytes_invalid=0 send_seq=1315798 receive_seq=1315798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129639 bytes_read=401191 bytes_retransmit=0 bytes_invalid=0 send_seq=21582 receive_seq=21582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999899 adj=49998947  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.08 cputime=6056.394 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 67165.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69632999 bytes_read=10487476 bytes_retransmit=9 bytes_invalid=0 send_seq=1315799 receive_seq=1315799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=129645 bytes_read=401207 bytes_retransmit=0 bytes_invalid=0 send_seq=21583 receive_seq=21583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49998818  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.08 cputime=6056.412 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
Stats 67166.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633005 bytes_read=10487597 bytes_retransmit=9 bytes_invalid=0 send_seq=1315800 receive_seq=1315800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=129651 bytes_read=401236 bytes_retransmit=0 bytes_invalid=0 send_seq=21584 receive_seq=21584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998908  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.08 cputime=6056.429 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
Stats 67167.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633011 bytes_read=10487703 bytes_retransmit=9 bytes_invalid=0 send_seq=1315801 receive_seq=1315801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=129657 bytes_read=401252 bytes_retransmit=0 bytes_invalid=0 send_seq=21585 receive_seq=21585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999892 adj=49998856  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.08 cputime=6056.445 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
Stats 67168.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633017 bytes_read=10487824 bytes_retransmit=9 bytes_invalid=0 send_seq=1315802 receive_seq=1315802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007758 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=129663 bytes_read=401268 bytes_retransmit=0 bytes_invalid=0 send_seq=21586 receive_seq=21586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999886 adj=49998799  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.08 cputime=6056.462 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000
Stats 67169.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633023 bytes_read=10487945 bytes_retransmit=9 bytes_invalid=0 send_seq=1315803 receive_seq=1315803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007758 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=129669 bytes_read=401284 bytes_retransmit=0 bytes_invalid=0 send_seq=21587 receive_seq=21587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999879 adj=49998737  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.08 cputime=6056.479 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 67170.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633029 bytes_read=10488065 bytes_retransmit=9 bytes_invalid=0 send_seq=1315804 receive_seq=1315804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007752 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=129675 bytes_read=401300 bytes_retransmit=0 bytes_invalid=0 send_seq=21588 receive_seq=21588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49998680  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.07 cputime=6056.495 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 67171.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633035 bytes_read=10488186 bytes_retransmit=9 bytes_invalid=0 send_seq=1315805 receive_seq=1315805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007751 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129681 bytes_read=401329 bytes_retransmit=0 bytes_invalid=0 send_seq=21589 receive_seq=21589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999871 adj=49998707  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.07 cputime=6056.512 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000
Stats 67172.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633041 bytes_read=10488307 bytes_retransmit=9 bytes_invalid=0 send_seq=1315806 receive_seq=1315806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007750 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129687 bytes_read=401345 bytes_retransmit=0 bytes_invalid=0 send_seq=21590 receive_seq=21590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999873 adj=49998682  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.07 cputime=6056.530 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000
Stats 67173.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633047 bytes_read=10488413 bytes_retransmit=9 bytes_invalid=0 send_seq=1315807 receive_seq=1315807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007754 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129693 bytes_read=401361 bytes_retransmit=0 bytes_invalid=0 send_seq=21591 receive_seq=21591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999887 adj=49998756  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.07 cputime=6056.547 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000
Stats 67174.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633053 bytes_read=10488529 bytes_retransmit=9 bytes_invalid=0 send_seq=1315808 receive_seq=1315808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129699 bytes_read=401377 bytes_retransmit=0 bytes_invalid=0 send_seq=21592 receive_seq=21592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999888 adj=49999013  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.07 cputime=6056.565 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 67175.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633059 bytes_read=10488664 bytes_retransmit=9 bytes_invalid=0 send_seq=1315809 receive_seq=1315809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129705 bytes_read=401393 bytes_retransmit=0 bytes_invalid=0 send_seq=21593 receive_seq=21593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49998996  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.06 cputime=6056.583 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000
Stats 67176.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633065 bytes_read=10488770 bytes_retransmit=9 bytes_invalid=0 send_seq=1315810 receive_seq=1315810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007762 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129711 bytes_read=401422 bytes_retransmit=0 bytes_invalid=0 send_seq=21594 receive_seq=21594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999893 adj=49999076  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.06 cputime=6056.600 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
Stats 67177.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633071 bytes_read=10488891 bytes_retransmit=9 bytes_invalid=0 send_seq=1315811 receive_seq=1315811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007760 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129717 bytes_read=401438 bytes_retransmit=0 bytes_invalid=0 send_seq=21595 receive_seq=21595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49999005  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.06 cputime=6056.617 memavail=3265040 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 67178.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633077 bytes_read=10489012 bytes_retransmit=9 bytes_invalid=0 send_seq=1315812 receive_seq=1315812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007754 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129723 bytes_read=401454 bytes_retransmit=0 bytes_invalid=0 send_seq=21596 receive_seq=21596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49999207  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.06 cputime=6056.634 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.7 pwm=0.000
Stats 67179.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633083 bytes_read=10489118 bytes_retransmit=9 bytes_invalid=0 send_seq=1315813 receive_seq=1315813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007758 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129729 bytes_read=401470 bytes_retransmit=0 bytes_invalid=0 send_seq=21597 receive_seq=21597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49999226  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.06 cputime=6056.652 memavail=3265044 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 67180.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633089 bytes_read=10489253 bytes_retransmit=9 bytes_invalid=0 send_seq=1315814 receive_seq=1315814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129735 bytes_read=401486 bytes_retransmit=0 bytes_invalid=0 send_seq=21598 receive_seq=21598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999900 adj=49999081  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.14 cputime=6056.669 memavail=3266436 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 67181.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633095 bytes_read=10489374 bytes_retransmit=9 bytes_invalid=0 send_seq=1315815 receive_seq=1315815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007746 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129741 bytes_read=401515 bytes_retransmit=0 bytes_invalid=0 send_seq=21599 receive_seq=21599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998959  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.14 cputime=6056.685 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.5 pwm=0.000
Stats 67182.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633101 bytes_read=10489480 bytes_retransmit=9 bytes_invalid=0 send_seq=1315816 receive_seq=1315816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007749 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129747 bytes_read=401531 bytes_retransmit=0 bytes_invalid=0 send_seq=21600 receive_seq=21600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49998911  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.14 cputime=6056.702 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 67183.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633107 bytes_read=10489601 bytes_retransmit=9 bytes_invalid=0 send_seq=1315817 receive_seq=1315817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007748 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129753 bytes_read=401546 bytes_retransmit=0 bytes_invalid=0 send_seq=21601 receive_seq=21601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999887 adj=49998801  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.14 cputime=6056.719 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 67184.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633113 bytes_read=10489719 bytes_retransmit=9 bytes_invalid=0 send_seq=1315818 receive_seq=1315818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007756 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129759 bytes_read=401561 bytes_retransmit=0 bytes_invalid=0 send_seq=21602 receive_seq=21602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999884 adj=49998770  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.14 cputime=6056.735 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 67185.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633119 bytes_read=10489822 bytes_retransmit=9 bytes_invalid=0 send_seq=1315819 receive_seq=1315819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007759 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129765 bytes_read=401576 bytes_retransmit=0 bytes_invalid=0 send_seq=21603 receive_seq=21603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999882 adj=49998744  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.21 cputime=6056.753 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 67186.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633125 bytes_read=10489957 bytes_retransmit=9 bytes_invalid=0 send_seq=1315820 receive_seq=1315820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007761 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129771 bytes_read=401604 bytes_retransmit=0 bytes_invalid=0 send_seq=21604 receive_seq=21604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999879 adj=49998754  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.21 cputime=6056.772 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 67187.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633131 bytes_read=10490078 bytes_retransmit=9 bytes_invalid=0 send_seq=1315821 receive_seq=1315821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007764 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129777 bytes_read=401619 bytes_retransmit=0 bytes_invalid=0 send_seq=21605 receive_seq=21605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999879 adj=49998752  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.21 cputime=6056.790 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 67188.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633137 bytes_read=10490184 bytes_retransmit=9 bytes_invalid=0 send_seq=1315822 receive_seq=1315822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129783 bytes_read=401634 bytes_retransmit=0 bytes_invalid=0 send_seq=21606 receive_seq=21606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49998784  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.21 cputime=6056.808 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.9 pwm=0.000
Stats 67189.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633143 bytes_read=10490305 bytes_retransmit=9 bytes_invalid=0 send_seq=1315823 receive_seq=1315823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129789 bytes_read=401650 bytes_retransmit=0 bytes_invalid=0 send_seq=21607 receive_seq=21607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999896 adj=49999136  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.21 cputime=6056.825 memavail=3266560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 67190.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633149 bytes_read=10490426 bytes_retransmit=9 bytes_invalid=0 send_seq=1315824 receive_seq=1315824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=129795 bytes_read=401666 bytes_retransmit=0 bytes_invalid=0 send_seq=21608 receive_seq=21608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49999004  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.19 cputime=6056.844 memavail=3265552 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000
Stats 67191.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633155 bytes_read=10490546 bytes_retransmit=9 bytes_invalid=0 send_seq=1315825 receive_seq=1315825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007819 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129801 bytes_read=401695 bytes_retransmit=0 bytes_invalid=0 send_seq=21609 receive_seq=21609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999897 adj=49999058  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.19 cputime=6056.862 memavail=3265560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 67192.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633161 bytes_read=10490667 bytes_retransmit=9 bytes_invalid=0 send_seq=1315826 receive_seq=1315826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007809 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129807 bytes_read=401711 bytes_retransmit=0 bytes_invalid=0 send_seq=21610 receive_seq=21610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999895 adj=49998883  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.19 cputime=6056.879 memavail=3265560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 67193.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633167 bytes_read=10490788 bytes_retransmit=9 bytes_invalid=0 send_seq=1315827 receive_seq=1315827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007803 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129813 bytes_read=401727 bytes_retransmit=0 bytes_invalid=0 send_seq=21611 receive_seq=21611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999892 adj=49998882  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.19 cputime=6056.896 memavail=3265560 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 67194.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633173 bytes_read=10490894 bytes_retransmit=9 bytes_invalid=0 send_seq=1315828 receive_seq=1315828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007800 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129819 bytes_read=401743 bytes_retransmit=0 bytes_invalid=0 send_seq=21612 receive_seq=21612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999889 adj=49998858  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.19 cputime=6056.914 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.4 pwm=0.000
Stats 67195.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633179 bytes_read=10491010 bytes_retransmit=9 bytes_invalid=0 send_seq=1315829 receive_seq=1315829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007803 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129825 bytes_read=401759 bytes_retransmit=0 bytes_invalid=0 send_seq=21613 receive_seq=21613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999885 adj=49998823  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.17 cputime=6056.930 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 67196.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633185 bytes_read=10491144 bytes_retransmit=9 bytes_invalid=0 send_seq=1315830 receive_seq=1315830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007795 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=129831 bytes_read=401788 bytes_retransmit=0 bytes_invalid=0 send_seq=21614 receive_seq=21614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999882 adj=49998777  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.17 cputime=6056.948 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000
Stats 67197.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633191 bytes_read=10491250 bytes_retransmit=9 bytes_invalid=0 send_seq=1315831 receive_seq=1315831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007793 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=129837 bytes_read=401804 bytes_retransmit=0 bytes_invalid=0 send_seq=21615 receive_seq=21615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49998782  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.17 cputime=6056.965 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 67198.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633197 bytes_read=10491371 bytes_retransmit=9 bytes_invalid=0 send_seq=1315832 receive_seq=1315832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=129843 bytes_read=401820 bytes_retransmit=0 bytes_invalid=0 send_seq=21616 receive_seq=21616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999871 adj=49998719  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.17 cputime=6056.981 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 67199.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633203 bytes_read=10491492 bytes_retransmit=9 bytes_invalid=0 send_seq=1315833 receive_seq=1315833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007771 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=129849 bytes_read=401836 bytes_retransmit=0 bytes_invalid=0 send_seq=21617 receive_seq=21617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999866 adj=49998704  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.17 cputime=6056.996 memavail=3265060 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 67200.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633209 bytes_read=10491598 bytes_retransmit=9 bytes_invalid=0 send_seq=1315834 receive_seq=1315834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=129855 bytes_read=401852 bytes_retransmit=0 bytes_invalid=0 send_seq=21618 receive_seq=21618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999872 adj=49998708  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.16 cputime=6057.013 memavail=3265996 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000
Stats 67201.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633215 bytes_read=10491733 bytes_retransmit=9 bytes_invalid=0 send_seq=1315835 receive_seq=1315835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129861 bytes_read=401881 bytes_retransmit=0 bytes_invalid=0 send_seq=21619 receive_seq=21619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999898 adj=49998840  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.16 cputime=6057.031 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 67202.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633227 bytes_read=10491870 bytes_retransmit=9 bytes_invalid=0 send_seq=1315837 receive_seq=1315837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007783 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129873 bytes_read=401913 bytes_retransmit=0 bytes_invalid=0 send_seq=21621 receive_seq=21621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999896 adj=49999254  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.16 cputime=6057.050 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 67203.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633233 bytes_read=10491976 bytes_retransmit=9 bytes_invalid=0 send_seq=1315838 receive_seq=1315838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129879 bytes_read=401929 bytes_retransmit=0 bytes_invalid=0 send_seq=21622 receive_seq=21622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999890 adj=49999131  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.16 cputime=6057.067 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 67204.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633239 bytes_read=10492097 bytes_retransmit=9 bytes_invalid=0 send_seq=1315839 receive_seq=1315839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007781 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129885 bytes_read=401945 bytes_retransmit=0 bytes_invalid=0 send_seq=21623 receive_seq=21623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999887 adj=49998989  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.16 cputime=6057.084 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
Stats 67205.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633245 bytes_read=10492218 bytes_retransmit=9 bytes_invalid=0 send_seq=1315840 receive_seq=1315840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=129891 bytes_read=401961 bytes_retransmit=0 bytes_invalid=0 send_seq=21624 receive_seq=21624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999882 adj=49998934  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.15 cputime=6057.101 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000
Stats 67206.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633251 bytes_read=10492333 bytes_retransmit=9 bytes_invalid=0 send_seq=1315841 receive_seq=1315841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007777 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129897 bytes_read=401990 bytes_retransmit=0 bytes_invalid=0 send_seq=21625 receive_seq=21625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999880 adj=49998856  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.15 cputime=6057.118 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 67207.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633257 bytes_read=10492454 bytes_retransmit=9 bytes_invalid=0 send_seq=1315842 receive_seq=1315842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007778 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129903 bytes_read=402006 bytes_retransmit=0 bytes_invalid=0 send_seq=21626 receive_seq=21626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999874 adj=49998832  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.15 cputime=6057.135 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 67208.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633263 bytes_read=10492575 bytes_retransmit=9 bytes_invalid=0 send_seq=1315843 receive_seq=1315843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129909 bytes_read=402022 bytes_retransmit=0 bytes_invalid=0 send_seq=21627 receive_seq=21627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999869 adj=49998762  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.15 cputime=6057.151 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 67209.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633269 bytes_read=10492681 bytes_retransmit=9 bytes_invalid=0 send_seq=1315844 receive_seq=1315844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007768 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129915 bytes_read=402038 bytes_retransmit=0 bytes_invalid=0 send_seq=21628 receive_seq=21628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999863 adj=49998721  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.15 cputime=6057.168 memavail=3266076 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.2 pwm=0.000
Stats 67210.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633275 bytes_read=10492802 bytes_retransmit=9 bytes_invalid=0 send_seq=1315845 receive_seq=1315845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129921 bytes_read=402054 bytes_retransmit=0 bytes_invalid=0 send_seq=21629 receive_seq=21629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999859 adj=49998692  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.14 cputime=6057.184 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 67211.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633281 bytes_read=10492937 bytes_retransmit=9 bytes_invalid=0 send_seq=1315846 receive_seq=1315846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007774 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=129927 bytes_read=402070 bytes_retransmit=0 bytes_invalid=0 send_seq=21630 receive_seq=21630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999856 adj=49998661  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.14 cputime=6057.202 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000
Stats 67212.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633287 bytes_read=10493043 bytes_retransmit=9 bytes_invalid=0 send_seq=1315847 receive_seq=1315847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129933 bytes_read=402099 bytes_retransmit=0 bytes_invalid=0 send_seq=21631 receive_seq=21631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999854 adj=49998678  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.14 cputime=6057.219 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 67213.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633293 bytes_read=10493164 bytes_retransmit=9 bytes_invalid=0 send_seq=1315848 receive_seq=1315848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007776 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129939 bytes_read=402115 bytes_retransmit=0 bytes_invalid=0 send_seq=21632 receive_seq=21632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999856 adj=49998700  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.14 cputime=6057.236 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 67214.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633299 bytes_read=10493285 bytes_retransmit=9 bytes_invalid=0 send_seq=1315849 receive_seq=1315849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007782 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129945 bytes_read=402131 bytes_retransmit=0 bytes_invalid=0 send_seq=21633 receive_seq=21633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999856 adj=49998762  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.14 cputime=6057.254 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
Stats 67215.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633305 bytes_read=10493391 bytes_retransmit=9 bytes_invalid=0 send_seq=1315850 receive_seq=1315850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007780 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129951 bytes_read=402147 bytes_retransmit=0 bytes_invalid=0 send_seq=21634 receive_seq=21634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999856 adj=49998789  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.28 cputime=6057.271 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 67216.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633311 bytes_read=10493525 bytes_retransmit=9 bytes_invalid=0 send_seq=1315851 receive_seq=1315851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129957 bytes_read=402163 bytes_retransmit=0 bytes_invalid=0 send_seq=21635 receive_seq=21635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998808  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.28 cputime=6057.288 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 67217.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633317 bytes_read=10493642 bytes_retransmit=9 bytes_invalid=0 send_seq=1315852 receive_seq=1315852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129963 bytes_read=402192 bytes_retransmit=0 bytes_invalid=0 send_seq=21636 receive_seq=21636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999849 adj=49998761  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.28 cputime=6057.305 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000
Stats 67218.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633323 bytes_read=10493748 bytes_retransmit=9 bytes_invalid=0 send_seq=1315853 receive_seq=1315853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007790 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129969 bytes_read=402208 bytes_retransmit=0 bytes_invalid=0 send_seq=21637 receive_seq=21637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999845 adj=49998726  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.28 cputime=6057.322 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000
Stats 67219.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633329 bytes_read=10493869 bytes_retransmit=9 bytes_invalid=0 send_seq=1315854 receive_seq=1315854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007789 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129975 bytes_read=402224 bytes_retransmit=0 bytes_invalid=0 send_seq=21638 receive_seq=21638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999840 adj=49998703  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.28 cputime=6057.339 memavail=3265580 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000
Stats 67220.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633335 bytes_read=10493990 bytes_retransmit=9 bytes_invalid=0 send_seq=1315855 receive_seq=1315855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129981 bytes_read=402240 bytes_retransmit=0 bytes_invalid=0 send_seq=21639 receive_seq=21639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999837 adj=49998681  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.26 cputime=6057.356 memavail=3265328 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000
Stats 67221.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633341 bytes_read=10494110 bytes_retransmit=9 bytes_invalid=0 send_seq=1315856 receive_seq=1315856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007780 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=129987 bytes_read=402256 bytes_retransmit=0 bytes_invalid=0 send_seq=21640 receive_seq=21640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999834 adj=49998678  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.26 cputime=6057.373 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000
Stats 67222.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633347 bytes_read=10494231 bytes_retransmit=9 bytes_invalid=0 send_seq=1315857 receive_seq=1315857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129993 bytes_read=402285 bytes_retransmit=0 bytes_invalid=0 send_seq=21641 receive_seq=21641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999833 adj=49998684  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.26 cputime=6057.390 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 67223.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633353 bytes_read=10494352 bytes_retransmit=9 bytes_invalid=0 send_seq=1315858 receive_seq=1315858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=129999 bytes_read=402301 bytes_retransmit=0 bytes_invalid=0 send_seq=21642 receive_seq=21642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999828 adj=49998726  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.26 cputime=6057.407 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.1 pwm=0.000
Stats 67224.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633359 bytes_read=10494458 bytes_retransmit=9 bytes_invalid=0 send_seq=1315859 receive_seq=1315859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130005 bytes_read=402317 bytes_retransmit=0 bytes_invalid=0 send_seq=21643 receive_seq=21643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998697  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.26 cputime=6057.424 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000
Stats 67225.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633365 bytes_read=10494579 bytes_retransmit=9 bytes_invalid=0 send_seq=1315860 receive_seq=1315860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130011 bytes_read=402333 bytes_retransmit=0 bytes_invalid=0 send_seq=21644 receive_seq=21644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999825 adj=49998707  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.24 cputime=6057.440 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000
Stats 67226.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633371 bytes_read=10494714 bytes_retransmit=9 bytes_invalid=0 send_seq=1315861 receive_seq=1315861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007775 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130017 bytes_read=402349 bytes_retransmit=0 bytes_invalid=0 send_seq=21645 receive_seq=21645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999823 adj=49998720  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.24 cputime=6057.458 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000
Stats 67227.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633377 bytes_read=10494818 bytes_retransmit=9 bytes_invalid=0 send_seq=1315862 receive_seq=1315862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007779 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130023 bytes_read=402378 bytes_retransmit=0 bytes_invalid=0 send_seq=21646 receive_seq=21646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999824 adj=49998725  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.24 cputime=6057.475 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 67228.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633383 bytes_read=10494937 bytes_retransmit=9 bytes_invalid=0 send_seq=1315863 receive_seq=1315863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007809 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130029 bytes_read=402394 bytes_retransmit=0 bytes_invalid=0 send_seq=21647 receive_seq=21647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999825 adj=49998756  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.24 cputime=6057.492 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000
Stats 67229.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633389 bytes_read=10495058 bytes_retransmit=9 bytes_invalid=0 send_seq=1315864 receive_seq=1315864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007811 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130035 bytes_read=402410 bytes_retransmit=0 bytes_invalid=0 send_seq=21648 receive_seq=21648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999824 adj=49998743  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.24 cputime=6057.509 memavail=3265332 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000
Stats 67230.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633395 bytes_read=10495164 bytes_retransmit=9 bytes_invalid=0 send_seq=1315865 receive_seq=1315865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007804 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130041 bytes_read=402426 bytes_retransmit=0 bytes_invalid=0 send_seq=21649 receive_seq=21649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999822 adj=49998746  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.22 cputime=6057.526 memavail=3265080 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 67231.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633401 bytes_read=10495299 bytes_retransmit=9 bytes_invalid=0 send_seq=1315866 receive_seq=1315866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007808 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130047 bytes_read=402442 bytes_retransmit=0 bytes_invalid=0 send_seq=21650 receive_seq=21650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999820 adj=49998754  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.22 cputime=6057.543 memavail=3265088 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 67232.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633407 bytes_read=10495420 bytes_retransmit=9 bytes_invalid=0 send_seq=1315867 receive_seq=1315867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007811 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130053 bytes_read=402471 bytes_retransmit=0 bytes_invalid=0 send_seq=21651 receive_seq=21651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999819 adj=49998736  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.22 cputime=6057.561 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 67233.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633413 bytes_read=10495526 bytes_retransmit=9 bytes_invalid=0 send_seq=1315868 receive_seq=1315868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007830 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130059 bytes_read=402487 bytes_retransmit=0 bytes_invalid=0 send_seq=21652 receive_seq=21652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999817 adj=49998741  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.22 cputime=6057.579 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 67234.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633419 bytes_read=10495647 bytes_retransmit=9 bytes_invalid=0 send_seq=1315869 receive_seq=1315869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007824 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130065 bytes_read=402503 bytes_retransmit=0 bytes_invalid=0 send_seq=21653 receive_seq=21653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999816 adj=49998706  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.22 cputime=6057.596 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 67235.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633425 bytes_read=10495768 bytes_retransmit=9 bytes_invalid=0 send_seq=1315870 receive_seq=1315870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007840 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130071 bytes_read=402519 bytes_retransmit=0 bytes_invalid=0 send_seq=21654 receive_seq=21654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999813 adj=49998730  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.28 cputime=6057.613 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 67236.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633431 bytes_read=10495888 bytes_retransmit=9 bytes_invalid=0 send_seq=1315871 receive_seq=1315871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007832 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130077 bytes_read=402535 bytes_retransmit=0 bytes_invalid=0 send_seq=21655 receive_seq=21655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999810 adj=49998673  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.28 cputime=6057.629 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 67237.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633437 bytes_read=10496009 bytes_retransmit=9 bytes_invalid=0 send_seq=1315872 receive_seq=1315872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007819 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130083 bytes_read=402564 bytes_retransmit=0 bytes_invalid=0 send_seq=21656 receive_seq=21656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999809 adj=49998691  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.28 cputime=6057.647 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 67238.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633443 bytes_read=10496125 bytes_retransmit=9 bytes_invalid=0 send_seq=1315873 receive_seq=1315873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007818 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130089 bytes_read=402580 bytes_retransmit=0 bytes_invalid=0 send_seq=21657 receive_seq=21657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999809 adj=49998726  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.28 cputime=6057.663 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 67239.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633449 bytes_read=10496231 bytes_retransmit=9 bytes_invalid=0 send_seq=1315874 receive_seq=1315874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007824 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130095 bytes_read=402596 bytes_retransmit=0 bytes_invalid=0 send_seq=21658 receive_seq=21658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999813 adj=49998757  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.28 cputime=6057.680 memavail=3264584 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
Stats 67240.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633455 bytes_read=10496352 bytes_retransmit=9 bytes_invalid=0 send_seq=1315875 receive_seq=1315875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007822 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130101 bytes_read=402612 bytes_retransmit=0 bytes_invalid=0 send_seq=21659 receive_seq=21659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999816 adj=49998833  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.26 cputime=6057.697 memavail=3265348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 67241.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633461 bytes_read=10496487 bytes_retransmit=9 bytes_invalid=0 send_seq=1315876 receive_seq=1315876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007828 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130107 bytes_read=402628 bytes_retransmit=0 bytes_invalid=0 send_seq=21660 receive_seq=21660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999820 adj=49998890  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.26 cputime=6057.714 memavail=3265348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 67242.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633467 bytes_read=10496593 bytes_retransmit=9 bytes_invalid=0 send_seq=1315877 receive_seq=1315877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007830 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130113 bytes_read=402657 bytes_retransmit=0 bytes_invalid=0 send_seq=21661 receive_seq=21661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999825 adj=49998929  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.26 cputime=6057.731 memavail=3265348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 67243.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633473 bytes_read=10496714 bytes_retransmit=9 bytes_invalid=0 send_seq=1315878 receive_seq=1315878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007822 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130119 bytes_read=402673 bytes_retransmit=0 bytes_invalid=0 send_seq=21662 receive_seq=21662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999823 adj=49998968  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.26 cputime=6057.748 memavail=3265348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 67244.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633479 bytes_read=10496835 bytes_retransmit=9 bytes_invalid=0 send_seq=1315879 receive_seq=1315879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007812 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130125 bytes_read=402689 bytes_retransmit=0 bytes_invalid=0 send_seq=21663 receive_seq=21663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999822 adj=49998935  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.26 cputime=6057.764 memavail=3265348 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 67245.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633485 bytes_read=10496941 bytes_retransmit=9 bytes_invalid=0 send_seq=1315880 receive_seq=1315880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007873 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130131 bytes_read=402705 bytes_retransmit=0 bytes_invalid=0 send_seq=21664 receive_seq=21664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998914  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.32 cputime=6057.781 memavail=3265356 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 67246.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633491 bytes_read=10497076 bytes_retransmit=9 bytes_invalid=0 send_seq=1315881 receive_seq=1315881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007855 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=130137 bytes_read=402721 bytes_retransmit=0 bytes_invalid=0 send_seq=21665 receive_seq=21665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998858  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.32 cputime=6057.798 memavail=3265356 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.5 pwm=0.000
Stats 67247.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633497 bytes_read=10497197 bytes_retransmit=9 bytes_invalid=0 send_seq=1315882 receive_seq=1315882 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007846 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=130143 bytes_read=402750 bytes_retransmit=0 bytes_invalid=0 send_seq=21666 receive_seq=21666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999824 adj=49998881  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.32 cputime=6057.814 memavail=3265356 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 67248.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633503 bytes_read=10497303 bytes_retransmit=9 bytes_invalid=0 send_seq=1315883 receive_seq=1315883 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007840 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=130149 bytes_read=402766 bytes_retransmit=0 bytes_invalid=0 send_seq=21667 receive_seq=21667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999822 adj=49998850  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.32 cputime=6057.830 memavail=3265356 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 67249.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633509 bytes_read=10497419 bytes_retransmit=9 bytes_invalid=0 send_seq=1315884 receive_seq=1315884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007836 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=130155 bytes_read=402782 bytes_retransmit=0 bytes_invalid=0 send_seq=21668 receive_seq=21668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999820 adj=49998825  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.32 cputime=6057.847 memavail=3265356 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 67250.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633515 bytes_read=10497540 bytes_retransmit=9 bytes_invalid=0 send_seq=1315885 receive_seq=1315885 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007833 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=130161 bytes_read=402798 bytes_retransmit=0 bytes_invalid=0 send_seq=21669 receive_seq=21669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999821 adj=49998808  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.29 cputime=6057.864 memavail=3265104 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 67251.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633521 bytes_read=10497660 bytes_retransmit=9 bytes_invalid=0 send_seq=1315886 receive_seq=1315886 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007835 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=130167 bytes_read=402814 bytes_retransmit=0 bytes_invalid=0 send_seq=21670 receive_seq=21670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999820 adj=49998830  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.29 cputime=6057.881 memavail=3265108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 67252.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633527 bytes_read=10497781 bytes_retransmit=9 bytes_invalid=0 send_seq=1315887 receive_seq=1315887 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007866 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130173 bytes_read=402843 bytes_retransmit=0 bytes_invalid=0 send_seq=21671 receive_seq=21671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999819 adj=49998817  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.29 cputime=6057.898 memavail=3265108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 67253.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633533 bytes_read=10497902 bytes_retransmit=9 bytes_invalid=0 send_seq=1315888 receive_seq=1315888 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007861 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130179 bytes_read=402859 bytes_retransmit=0 bytes_invalid=0 send_seq=21672 receive_seq=21672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999836 adj=49998751  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.29 cputime=6057.914 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
Stats 67254.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633539 bytes_read=10498008 bytes_retransmit=9 bytes_invalid=0 send_seq=1315889 receive_seq=1315889 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007858 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130185 bytes_read=402875 bytes_retransmit=0 bytes_invalid=0 send_seq=21673 receive_seq=21673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999857 adj=49999042  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.29 cputime=6057.930 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 67255.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633545 bytes_read=10498144 bytes_retransmit=9 bytes_invalid=0 send_seq=1315890 receive_seq=1315890 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007858 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130191 bytes_read=402891 bytes_retransmit=0 bytes_invalid=0 send_seq=21674 receive_seq=21674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999855 adj=49999331  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.27 cputime=6057.948 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 67256.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633551 bytes_read=10498264 bytes_retransmit=9 bytes_invalid=0 send_seq=1315891 receive_seq=1315891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007856 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130197 bytes_read=402907 bytes_retransmit=0 bytes_invalid=0 send_seq=21675 receive_seq=21675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999857 adj=49999188  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.27 cputime=6057.964 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 67257.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633557 bytes_read=10498370 bytes_retransmit=9 bytes_invalid=0 send_seq=1315892 receive_seq=1315892 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007856 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130203 bytes_read=402936 bytes_retransmit=0 bytes_invalid=0 send_seq=21676 receive_seq=21676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49999139  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.27 cputime=6057.980 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 67258.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633563 bytes_read=10498506 bytes_retransmit=9 bytes_invalid=0 send_seq=1315893 receive_seq=1315893 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007869 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130209 bytes_read=402952 bytes_retransmit=0 bytes_invalid=0 send_seq=21677 receive_seq=21677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999849 adj=49999009  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.27 cputime=6057.997 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.7 pwm=0.000
Stats 67259.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633569 bytes_read=10498610 bytes_retransmit=9 bytes_invalid=0 send_seq=1315894 receive_seq=1315894 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007865 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130215 bytes_read=402968 bytes_retransmit=0 bytes_invalid=0 send_seq=21678 receive_seq=21678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999851 adj=49998889  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.27 cputime=6058.013 memavail=3265112 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 67260.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633575 bytes_read=10498713 bytes_retransmit=9 bytes_invalid=0 send_seq=1315895 receive_seq=1315895 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007871 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130221 bytes_read=402984 bytes_retransmit=0 bytes_invalid=0 send_seq=21679 receive_seq=21679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999847 adj=49998928  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.25 cputime=6058.028 memavail=3265260 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 67261.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633581 bytes_read=10498863 bytes_retransmit=9 bytes_invalid=0 send_seq=1315896 receive_seq=1315896 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007864 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130227 bytes_read=403000 bytes_retransmit=0 bytes_invalid=0 send_seq=21680 receive_seq=21680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999848 adj=49998837  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.25 cputime=6058.046 memavail=3265368 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 67262.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633587 bytes_read=10498969 bytes_retransmit=9 bytes_invalid=0 send_seq=1315897 receive_seq=1315897 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007857 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130233 bytes_read=403029 bytes_retransmit=0 bytes_invalid=0 send_seq=21681 receive_seq=21681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999842 adj=49998876  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.25 cputime=6058.064 memavail=3265368 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 67263.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633599 bytes_read=10499091 bytes_retransmit=9 bytes_invalid=0 send_seq=1315899 receive_seq=1315899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007848 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130245 bytes_read=403061 bytes_retransmit=0 bytes_invalid=0 send_seq=21683 receive_seq=21683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999837 adj=49998796  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.25 cputime=6058.082 memavail=3266108 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 67264.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633605 bytes_read=10499227 bytes_retransmit=9 bytes_invalid=0 send_seq=1315900 receive_seq=1315900 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007842 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130251 bytes_read=403077 bytes_retransmit=0 bytes_invalid=0 send_seq=21684 receive_seq=21684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999840 adj=49998719  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.25 cputime=6058.100 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 67265.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633611 bytes_read=10499333 bytes_retransmit=9 bytes_invalid=0 send_seq=1315901 receive_seq=1315901 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007869 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130257 bytes_read=403093 bytes_retransmit=0 bytes_invalid=0 send_seq=21685 receive_seq=21685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999844 adj=49998842  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.31 cputime=6058.116 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
Stats 67266.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633617 bytes_read=10499453 bytes_retransmit=9 bytes_invalid=0 send_seq=1315902 receive_seq=1315902 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007867 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130263 bytes_read=403109 bytes_retransmit=0 bytes_invalid=0 send_seq=21686 receive_seq=21686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999850 adj=49998859  heater_bed: target=0 temp=47.3 pwm=0.000 sysload=0.31 cputime=6058.133 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
Stats 67267.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633623 bytes_read=10499589 bytes_retransmit=9 bytes_invalid=0 send_seq=1315903 receive_seq=1315903 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007861 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130269 bytes_read=403138 bytes_retransmit=0 bytes_invalid=0 send_seq=21687 receive_seq=21687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999846 adj=49998957  heater_bed: target=0 temp=47.3 pwm=0.000 sysload=0.31 cputime=6058.150 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 67268.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633629 bytes_read=10499695 bytes_retransmit=9 bytes_invalid=0 send_seq=1315904 receive_seq=1315904 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007856 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130275 bytes_read=403153 bytes_retransmit=0 bytes_invalid=0 send_seq=21688 receive_seq=21688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998882  heater_bed: target=0 temp=47.3 pwm=0.000 sysload=0.31 cputime=6058.166 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 67269.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633635 bytes_read=10499801 bytes_retransmit=9 bytes_invalid=0 send_seq=1315905 receive_seq=1315905 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007852 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130281 bytes_read=403168 bytes_retransmit=0 bytes_invalid=0 send_seq=21689 receive_seq=21689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999854 adj=49999075  heater_bed: target=0 temp=47.3 pwm=0.000 sysload=0.31 cputime=6058.183 memavail=3266124 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 67270.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633641 bytes_read=10499931 bytes_retransmit=9 bytes_invalid=0 send_seq=1315906 receive_seq=1315906 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007851 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130287 bytes_read=403183 bytes_retransmit=0 bytes_invalid=0 send_seq=21690 receive_seq=21690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999862 adj=49998961  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.28 cputime=6058.200 memavail=3266020 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 67271.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633647 bytes_read=10500051 bytes_retransmit=9 bytes_invalid=0 send_seq=1315907 receive_seq=1315907 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007842 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130293 bytes_read=403198 bytes_retransmit=0 bytes_invalid=0 send_seq=21691 receive_seq=21691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999872 adj=49999068  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.28 cputime=6058.217 memavail=3266132 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 67272.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633653 bytes_read=10500157 bytes_retransmit=9 bytes_invalid=0 send_seq=1315908 receive_seq=1315908 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007839 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=130299 bytes_read=403226 bytes_retransmit=0 bytes_invalid=0 send_seq=21692 receive_seq=21692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999865 adj=49999195  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.28 cputime=6058.233 memavail=3270004 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
Stats 67273.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633659 bytes_read=10500293 bytes_retransmit=9 bytes_invalid=0 send_seq=1315909 receive_seq=1315909 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007835 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=130305 bytes_read=403241 bytes_retransmit=0 bytes_invalid=0 send_seq=21693 receive_seq=21693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999877 adj=49999022  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.28 cputime=6058.250 memavail=3270148 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 67274.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633665 bytes_read=10500399 bytes_retransmit=9 bytes_invalid=0 send_seq=1315910 receive_seq=1315910 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007832 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=130311 bytes_read=403257 bytes_retransmit=0 bytes_invalid=0 send_seq=21694 receive_seq=21694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999874 adj=49999181  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.28 cputime=6058.267 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 67275.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633671 bytes_read=10500505 bytes_retransmit=9 bytes_invalid=0 send_seq=1315911 receive_seq=1315911 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007822 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=130317 bytes_read=403273 bytes_retransmit=0 bytes_invalid=0 send_seq=21695 receive_seq=21695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999868 adj=49999073  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.26 cputime=6058.284 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 67276.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633677 bytes_read=10500655 bytes_retransmit=9 bytes_invalid=0 send_seq=1315912 receive_seq=1315912 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007820 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=130323 bytes_read=403289 bytes_retransmit=0 bytes_invalid=0 send_seq=21696 receive_seq=21696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999865 adj=49998949  heater_bed: target=0 temp=47.1 pwm=0.000 sysload=0.26 cputime=6058.301 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 67277.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633683 bytes_read=10500761 bytes_retransmit=9 bytes_invalid=0 send_seq=1315913 receive_seq=1315913 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007821 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130329 bytes_read=403318 bytes_retransmit=0 bytes_invalid=0 send_seq=21697 receive_seq=21697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999859 adj=49998897  heater_bed: target=0 temp=47.1 pwm=0.000 sysload=0.26 cputime=6058.318 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000
Stats 67278.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633689 bytes_read=10500867 bytes_retransmit=9 bytes_invalid=0 send_seq=1315914 receive_seq=1315914 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007817 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130335 bytes_read=403334 bytes_retransmit=0 bytes_invalid=0 send_seq=21698 receive_seq=21698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999855 adj=49998785  heater_bed: target=0 temp=47.1 pwm=0.000 sysload=0.26 cputime=6058.334 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000
Stats 67279.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633695 bytes_read=10501003 bytes_retransmit=9 bytes_invalid=0 send_seq=1315915 receive_seq=1315915 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007816 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130341 bytes_read=403350 bytes_retransmit=0 bytes_invalid=0 send_seq=21699 receive_seq=21699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998767  heater_bed: target=0 temp=47.1 pwm=0.000 sysload=0.26 cputime=6058.351 memavail=3269648 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 67280.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633701 bytes_read=10501109 bytes_retransmit=9 bytes_invalid=0 send_seq=1315916 receive_seq=1315916 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007816 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130347 bytes_read=403366 bytes_retransmit=0 bytes_invalid=0 send_seq=21700 receive_seq=21700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999853 adj=49998748  heater_bed: target=0 temp=47.1 pwm=0.000 sysload=0.24 cputime=6058.368 memavail=3268640 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 67281.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633707 bytes_read=10501238 bytes_retransmit=9 bytes_invalid=0 send_seq=1315917 receive_seq=1315917 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007817 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130353 bytes_read=403382 bytes_retransmit=0 bytes_invalid=0 send_seq=21701 receive_seq=21701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999853 adj=49998788  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.24 cputime=6058.385 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 67282.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633713 bytes_read=10501359 bytes_retransmit=9 bytes_invalid=0 send_seq=1315918 receive_seq=1315918 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007820 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=130359 bytes_read=403411 bytes_retransmit=0 bytes_invalid=0 send_seq=21702 receive_seq=21702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999851 adj=49998813  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.24 cputime=6058.403 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Stats 67283.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633719 bytes_read=10501465 bytes_retransmit=9 bytes_invalid=0 send_seq=1315919 receive_seq=1315919 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007815 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=130365 bytes_read=403427 bytes_retransmit=0 bytes_invalid=0 send_seq=21703 receive_seq=21703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998787  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.24 cputime=6058.420 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 67284.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633725 bytes_read=10501586 bytes_retransmit=9 bytes_invalid=0 send_seq=1315920 receive_seq=1315920 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007816 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=130371 bytes_read=403443 bytes_retransmit=0 bytes_invalid=0 send_seq=21704 receive_seq=21704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999867 adj=49998838  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.24 cputime=6058.437 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 67285.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633731 bytes_read=10501707 bytes_retransmit=9 bytes_invalid=0 send_seq=1315921 receive_seq=1315921 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007810 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=130377 bytes_read=403459 bytes_retransmit=0 bytes_invalid=0 send_seq=21705 receive_seq=21705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999865 adj=49999088  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.22 cputime=6058.454 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 67286.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633737 bytes_read=10501827 bytes_retransmit=9 bytes_invalid=0 send_seq=1315922 receive_seq=1315922 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007805 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=130383 bytes_read=403475 bytes_retransmit=0 bytes_invalid=0 send_seq=21706 receive_seq=21706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999859 adj=49999012  heater_bed: target=0 temp=47.0 pwm=0.000 sysload=0.22 cputime=6058.471 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 67287.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633743 bytes_read=10501948 bytes_retransmit=9 bytes_invalid=0 send_seq=1315923 receive_seq=1315923 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007806 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130389 bytes_read=403504 bytes_retransmit=0 bytes_invalid=0 send_seq=21707 receive_seq=21707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998901  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.22 cputime=6058.489 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 67288.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633749 bytes_read=10502069 bytes_retransmit=9 bytes_invalid=0 send_seq=1315924 receive_seq=1315924 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007799 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130395 bytes_read=403520 bytes_retransmit=0 bytes_invalid=0 send_seq=21708 receive_seq=21708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999867 adj=49998871  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.22 cputime=6058.506 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 67289.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633755 bytes_read=10502175 bytes_retransmit=9 bytes_invalid=0 send_seq=1315925 receive_seq=1315925 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130401 bytes_read=403536 bytes_retransmit=0 bytes_invalid=0 send_seq=21709 receive_seq=21709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999864 adj=49999030  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.22 cputime=6058.522 memavail=3268652 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 67290.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633761 bytes_read=10502296 bytes_retransmit=9 bytes_invalid=0 send_seq=1315926 receive_seq=1315926 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130407 bytes_read=403552 bytes_retransmit=0 bytes_invalid=0 send_seq=21710 receive_seq=21710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998965  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.20 cputime=6058.539 memavail=3268288 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 67291.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633767 bytes_read=10502430 bytes_retransmit=9 bytes_invalid=0 send_seq=1315927 receive_seq=1315927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007784 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=130413 bytes_read=403568 bytes_retransmit=0 bytes_invalid=0 send_seq=21711 receive_seq=21711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999854 adj=49998873  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.20 cputime=6058.555 memavail=3267932 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 67292.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633773 bytes_read=10502532 bytes_retransmit=9 bytes_invalid=0 send_seq=1315928 receive_seq=1315928 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007785 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130419 bytes_read=403597 bytes_retransmit=0 bytes_invalid=0 send_seq=21712 receive_seq=21712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998815  heater_bed: target=0 temp=46.9 pwm=0.000 sysload=0.20 cputime=6058.574 memavail=3267428 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 67293.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633779 bytes_read=10502653 bytes_retransmit=9 bytes_invalid=0 send_seq=1315929 receive_seq=1315929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007788 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130425 bytes_read=403613 bytes_retransmit=0 bytes_invalid=0 send_seq=21713 receive_seq=21713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999849 adj=49998794  heater_bed: target=0 temp=46.8 pwm=0.000 sysload=0.20 cputime=6058.592 memavail=3267428 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 67294.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633785 bytes_read=10502774 bytes_retransmit=9 bytes_invalid=0 send_seq=1315930 receive_seq=1315930 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007792 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130431 bytes_read=403629 bytes_retransmit=0 bytes_invalid=0 send_seq=21714 receive_seq=21714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999847 adj=49998768  heater_bed: target=0 temp=46.8 pwm=0.000 sysload=0.20 cputime=6058.609 memavail=3267428 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 67295.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633791 bytes_read=10502880 bytes_retransmit=9 bytes_invalid=0 send_seq=1315931 receive_seq=1315931 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007796 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130437 bytes_read=403645 bytes_retransmit=0 bytes_invalid=0 send_seq=21715 receive_seq=21715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999844 adj=49998755  heater_bed: target=0 temp=46.8 pwm=0.000 sysload=0.27 cputime=6058.627 memavail=3267432 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 67296.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633797 bytes_read=10503015 bytes_retransmit=9 bytes_invalid=0 send_seq=1315932 receive_seq=1315932 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007792 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=130443 bytes_read=403661 bytes_retransmit=0 bytes_invalid=0 send_seq=21716 receive_seq=21716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998729  heater_bed: target=0 temp=46.8 pwm=0.000 sysload=0.27 cputime=6058.644 memavail=3267432 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 67297.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633803 bytes_read=10503136 bytes_retransmit=9 bytes_invalid=0 send_seq=1315933 receive_seq=1315933 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130449 bytes_read=403690 bytes_retransmit=0 bytes_invalid=0 send_seq=21717 receive_seq=21717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998994  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.27 cputime=6058.662 memavail=3267432 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 67298.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633809 bytes_read=10503242 bytes_retransmit=9 bytes_invalid=0 send_seq=1315934 receive_seq=1315934 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007791 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130455 bytes_read=403706 bytes_retransmit=0 bytes_invalid=0 send_seq=21718 receive_seq=21718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999846 adj=49998871  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.27 cputime=6058.679 memavail=3267432 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 67299.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633815 bytes_read=10503363 bytes_retransmit=9 bytes_invalid=0 send_seq=1315935 receive_seq=1315935 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007789 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130461 bytes_read=403722 bytes_retransmit=0 bytes_invalid=0 send_seq=21719 receive_seq=21719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999847 adj=49998780  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.27 cputime=6058.697 memavail=3267432 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 67300.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633821 bytes_read=10503484 bytes_retransmit=9 bytes_invalid=0 send_seq=1315936 receive_seq=1315936 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007795 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130467 bytes_read=403738 bytes_retransmit=0 bytes_invalid=0 send_seq=21720 receive_seq=21720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999842 adj=49998825  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.33 cputime=6058.714 memavail=3267624 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
Stats 67301.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633827 bytes_read=10503604 bytes_retransmit=9 bytes_invalid=0 send_seq=1315937 receive_seq=1315937 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007795 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=130473 bytes_read=403754 bytes_retransmit=0 bytes_invalid=0 send_seq=21721 receive_seq=21721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999836 adj=49998744  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.33 cputime=6058.732 memavail=3267684 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
Stats 67302.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633833 bytes_read=10503722 bytes_retransmit=9 bytes_invalid=0 send_seq=1315938 receive_seq=1315938 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007795 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130479 bytes_read=403783 bytes_retransmit=0 bytes_invalid=0 send_seq=21722 receive_seq=21722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999830 adj=49998673  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.33 cputime=6058.752 memavail=3267684 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 67303.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69633839 bytes_read=10503840 bytes_retransmit=9 bytes_invalid=0 send_seq=1315939 receive_seq=1315939 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007789 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=130485 bytes_read=403799 bytes_retransmit=0 bytes_invalid=0 send_seq=21723 receive_seq=21723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999825 adj=49998633  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=0.33 cputime=6058.769 memavail=3267684 print_time=20845.508 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Stats 69514.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647309 bytes_read=10765908 bytes_retransmit=9 bytes_invalid=0 send_seq=1318184 receive_seq=1318184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008034 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=143955 bytes_read=445257 bytes_retransmit=0 bytes_invalid=0 send_seq=23968 receive_seq=23968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49998634  heater_bed: target=0 temp=30.3 pwm=0.000 sysload=0.11 cputime=6093.543 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69515.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647315 bytes_read=10766024 bytes_retransmit=9 bytes_invalid=0 send_seq=1318185 receive_seq=1318185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008038 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=143961 bytes_read=445286 bytes_retransmit=0 bytes_invalid=0 send_seq=23969 receive_seq=23969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999630 adj=49998644  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6093.562 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69516.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647321 bytes_read=10766145 bytes_retransmit=9 bytes_invalid=0 send_seq=1318186 receive_seq=1318186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008045 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=143967 bytes_read=445302 bytes_retransmit=0 bytes_invalid=0 send_seq=23970 receive_seq=23970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999630 adj=49998728  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6093.580 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69517.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647327 bytes_read=10766266 bytes_retransmit=9 bytes_invalid=0 send_seq=1318187 receive_seq=1318187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008043 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=143973 bytes_read=445318 bytes_retransmit=0 bytes_invalid=0 send_seq=23971 receive_seq=23971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999631 adj=49998695  heater_bed: target=0 temp=30.3 pwm=0.000 sysload=0.19 cputime=6093.596 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69518.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647333 bytes_read=10766372 bytes_retransmit=9 bytes_invalid=0 send_seq=1318188 receive_seq=1318188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008036 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=143979 bytes_read=445334 bytes_retransmit=0 bytes_invalid=0 send_seq=23972 receive_seq=23972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999627 adj=49998697  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.19 cputime=6093.613 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69519.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647339 bytes_read=10766493 bytes_retransmit=9 bytes_invalid=0 send_seq=1318189 receive_seq=1318189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008031 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=143985 bytes_read=445350 bytes_retransmit=0 bytes_invalid=0 send_seq=23973 receive_seq=23973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998625  heater_bed: target=0 temp=30.3 pwm=0.000 sysload=0.19 cputime=6093.629 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69520.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647345 bytes_read=10766628 bytes_retransmit=9 bytes_invalid=0 send_seq=1318190 receive_seq=1318190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008026 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=143991 bytes_read=445379 bytes_retransmit=0 bytes_invalid=0 send_seq=23974 receive_seq=23974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998670  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.19 cputime=6093.646 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69521.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647351 bytes_read=10766734 bytes_retransmit=9 bytes_invalid=0 send_seq=1318191 receive_seq=1318191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008049 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=143997 bytes_read=445395 bytes_retransmit=0 bytes_invalid=0 send_seq=23975 receive_seq=23975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998667  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.19 cputime=6093.664 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69522.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647357 bytes_read=10766855 bytes_retransmit=9 bytes_invalid=0 send_seq=1318192 receive_seq=1318192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008052 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144003 bytes_read=445411 bytes_retransmit=0 bytes_invalid=0 send_seq=23976 receive_seq=23976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998565  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.17 cputime=6093.681 memavail=3265468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69523.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647363 bytes_read=10766976 bytes_retransmit=9 bytes_invalid=0 send_seq=1318193 receive_seq=1318193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008056 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144009 bytes_read=445427 bytes_retransmit=0 bytes_invalid=0 send_seq=23977 receive_seq=23977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998554  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.17 cputime=6093.699 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69524.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647369 bytes_read=10767082 bytes_retransmit=9 bytes_invalid=0 send_seq=1318194 receive_seq=1318194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008057 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144015 bytes_read=445443 bytes_retransmit=0 bytes_invalid=0 send_seq=23978 receive_seq=23978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998571  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.17 cputime=6093.716 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69525.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647375 bytes_read=10767214 bytes_retransmit=9 bytes_invalid=0 send_seq=1318195 receive_seq=1318195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008053 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144021 bytes_read=445472 bytes_retransmit=0 bytes_invalid=0 send_seq=23979 receive_seq=23979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998580  heater_bed: target=0 temp=30.3 pwm=0.000 sysload=0.17 cputime=6093.733 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69526.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647381 bytes_read=10767333 bytes_retransmit=9 bytes_invalid=0 send_seq=1318196 receive_seq=1318196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008050 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144027 bytes_read=445488 bytes_retransmit=0 bytes_invalid=0 send_seq=23980 receive_seq=23980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998588  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.17 cputime=6093.750 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69527.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647387 bytes_read=10767439 bytes_retransmit=9 bytes_invalid=0 send_seq=1318197 receive_seq=1318197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008052 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144033 bytes_read=445504 bytes_retransmit=0 bytes_invalid=0 send_seq=23981 receive_seq=23981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999627 adj=49998621  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.16 cputime=6093.767 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69528.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647393 bytes_read=10767560 bytes_retransmit=9 bytes_invalid=0 send_seq=1318198 receive_seq=1318198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008054 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144039 bytes_read=445520 bytes_retransmit=0 bytes_invalid=0 send_seq=23982 receive_seq=23982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999630 adj=49998636  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.16 cputime=6093.784 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69529.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647405 bytes_read=10767697 bytes_retransmit=9 bytes_invalid=0 send_seq=1318200 receive_seq=1318200 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008048 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144051 bytes_read=445552 bytes_retransmit=0 bytes_invalid=0 send_seq=23984 receive_seq=23984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49998673  heater_bed: target=0 temp=30.3 pwm=0.000 sysload=0.16 cputime=6093.802 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69530.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647411 bytes_read=10767817 bytes_retransmit=9 bytes_invalid=0 send_seq=1318201 receive_seq=1318201 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008053 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144057 bytes_read=445581 bytes_retransmit=0 bytes_invalid=0 send_seq=23985 receive_seq=23985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999622 adj=49998578  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.16 cputime=6093.819 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69531.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647417 bytes_read=10767938 bytes_retransmit=9 bytes_invalid=0 send_seq=1318202 receive_seq=1318202 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008050 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144063 bytes_read=445597 bytes_retransmit=0 bytes_invalid=0 send_seq=23986 receive_seq=23986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998547  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.16 cputime=6093.836 memavail=3264468 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69532.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647423 bytes_read=10768059 bytes_retransmit=9 bytes_invalid=0 send_seq=1318203 receive_seq=1318203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008049 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144069 bytes_read=445613 bytes_retransmit=0 bytes_invalid=0 send_seq=23987 receive_seq=23987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999623 adj=49998619  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.14 cputime=6093.853 memavail=3264472 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69533.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647429 bytes_read=10768165 bytes_retransmit=9 bytes_invalid=0 send_seq=1318204 receive_seq=1318204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008060 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144075 bytes_read=445629 bytes_retransmit=0 bytes_invalid=0 send_seq=23988 receive_seq=23988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999623 adj=49998587  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.14 cputime=6093.869 memavail=3264480 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69534.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647435 bytes_read=10768286 bytes_retransmit=9 bytes_invalid=0 send_seq=1318205 receive_seq=1318205 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008061 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144081 bytes_read=445645 bytes_retransmit=0 bytes_invalid=0 send_seq=23989 receive_seq=23989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49998574  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.14 cputime=6093.885 memavail=3264480 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69535.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647441 bytes_read=10768421 bytes_retransmit=9 bytes_invalid=0 send_seq=1318206 receive_seq=1318206 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008065 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144087 bytes_read=445674 bytes_retransmit=0 bytes_invalid=0 send_seq=23990 receive_seq=23990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998600  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.14 cputime=6093.903 memavail=3264480 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69536.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647447 bytes_read=10768522 bytes_retransmit=9 bytes_invalid=0 send_seq=1318207 receive_seq=1318207 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008068 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144093 bytes_read=445690 bytes_retransmit=0 bytes_invalid=0 send_seq=23991 receive_seq=23991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998618  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.14 cputime=6093.919 memavail=3264480 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69537.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647453 bytes_read=10768643 bytes_retransmit=9 bytes_invalid=0 send_seq=1318208 receive_seq=1318208 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008064 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144099 bytes_read=445706 bytes_retransmit=0 bytes_invalid=0 send_seq=23992 receive_seq=23992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999628 adj=49998626  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.13 cputime=6093.936 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69538.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647459 bytes_read=10768764 bytes_retransmit=9 bytes_invalid=0 send_seq=1318209 receive_seq=1318209 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008062 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144105 bytes_read=445722 bytes_retransmit=0 bytes_invalid=0 send_seq=23993 receive_seq=23993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998654  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.13 cputime=6093.953 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69539.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647465 bytes_read=10768870 bytes_retransmit=9 bytes_invalid=0 send_seq=1318210 receive_seq=1318210 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008060 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144111 bytes_read=445738 bytes_retransmit=0 bytes_invalid=0 send_seq=23994 receive_seq=23994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998672  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.13 cputime=6093.969 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69540.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647471 bytes_read=10769005 bytes_retransmit=9 bytes_invalid=0 send_seq=1318211 receive_seq=1318211 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008054 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144117 bytes_read=445767 bytes_retransmit=0 bytes_invalid=0 send_seq=23995 receive_seq=23995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999635 adj=49998619  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.13 cputime=6093.986 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69541.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647477 bytes_read=10769126 bytes_retransmit=9 bytes_invalid=0 send_seq=1318212 receive_seq=1318212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008053 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144123 bytes_read=445783 bytes_retransmit=0 bytes_invalid=0 send_seq=23996 receive_seq=23996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999631 adj=49998767  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.13 cputime=6094.002 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69542.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647483 bytes_read=10769232 bytes_retransmit=9 bytes_invalid=0 send_seq=1318213 receive_seq=1318213 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008076 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144129 bytes_read=445799 bytes_retransmit=0 bytes_invalid=0 send_seq=23997 receive_seq=23997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999628 adj=49998671  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.12 cputime=6094.019 memavail=3264236 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69543.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647489 bytes_read=10769353 bytes_retransmit=9 bytes_invalid=0 send_seq=1318214 receive_seq=1318214 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008073 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144135 bytes_read=445815 bytes_retransmit=0 bytes_invalid=0 send_seq=23998 receive_seq=23998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999628 adj=49998559  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.12 cputime=6094.036 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69544.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647495 bytes_read=10769474 bytes_retransmit=9 bytes_invalid=0 send_seq=1318215 receive_seq=1318215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008076 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144141 bytes_read=445831 bytes_retransmit=0 bytes_invalid=0 send_seq=23999 receive_seq=23999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49998580  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.12 cputime=6094.052 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69545.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647501 bytes_read=10769594 bytes_retransmit=9 bytes_invalid=0 send_seq=1318216 receive_seq=1318216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008075 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=144147 bytes_read=445860 bytes_retransmit=0 bytes_invalid=0 send_seq=24000 receive_seq=24000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999640 adj=49998528  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.12 cputime=6094.070 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69546.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647507 bytes_read=10769715 bytes_retransmit=9 bytes_invalid=0 send_seq=1318217 receive_seq=1318217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008077 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=144153 bytes_read=445876 bytes_retransmit=0 bytes_invalid=0 send_seq=24001 receive_seq=24001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999658 adj=49998805  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.12 cputime=6094.086 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69547.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647513 bytes_read=10769830 bytes_retransmit=9 bytes_invalid=0 send_seq=1318218 receive_seq=1318218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008079 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=144159 bytes_read=445892 bytes_retransmit=0 bytes_invalid=0 send_seq=24002 receive_seq=24002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999654 adj=49999043  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6094.103 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69548.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647519 bytes_read=10769936 bytes_retransmit=9 bytes_invalid=0 send_seq=1318219 receive_seq=1318219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008078 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=144165 bytes_read=445908 bytes_retransmit=0 bytes_invalid=0 send_seq=24003 receive_seq=24003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999649 adj=49998878  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6094.120 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69549.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647525 bytes_read=10770057 bytes_retransmit=9 bytes_invalid=0 send_seq=1318220 receive_seq=1318220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008082 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=144171 bytes_read=445924 bytes_retransmit=0 bytes_invalid=0 send_seq=24004 receive_seq=24004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999646 adj=49998734  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6094.137 memavail=3264240 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69550.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647531 bytes_read=10770192 bytes_retransmit=9 bytes_invalid=0 send_seq=1318221 receive_seq=1318221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008077 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144177 bytes_read=445953 bytes_retransmit=0 bytes_invalid=0 send_seq=24005 receive_seq=24005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999641 adj=49998656  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.11 cputime=6094.153 memavail=3264244 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69551.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647537 bytes_read=10770298 bytes_retransmit=9 bytes_invalid=0 send_seq=1318222 receive_seq=1318222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008081 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144183 bytes_read=445969 bytes_retransmit=0 bytes_invalid=0 send_seq=24006 receive_seq=24006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999636 adj=49998577  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.11 cputime=6094.169 memavail=3264244 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69552.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647543 bytes_read=10770419 bytes_retransmit=9 bytes_invalid=0 send_seq=1318223 receive_seq=1318223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008079 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144189 bytes_read=445985 bytes_retransmit=0 bytes_invalid=0 send_seq=24007 receive_seq=24007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999632 adj=49998517  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.10 cputime=6094.186 memavail=3264244 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69553.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647549 bytes_read=10770540 bytes_retransmit=9 bytes_invalid=0 send_seq=1318224 receive_seq=1318224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008074 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144195 bytes_read=446001 bytes_retransmit=0 bytes_invalid=0 send_seq=24008 receive_seq=24008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998481  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.10 cputime=6094.203 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69554.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647555 bytes_read=10770646 bytes_retransmit=9 bytes_invalid=0 send_seq=1318225 receive_seq=1318225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008069 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144201 bytes_read=446017 bytes_retransmit=0 bytes_invalid=0 send_seq=24009 receive_seq=24009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998478  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.10 cputime=6094.219 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69555.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647561 bytes_read=10770781 bytes_retransmit=9 bytes_invalid=0 send_seq=1318226 receive_seq=1318226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008071 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144207 bytes_read=446046 bytes_retransmit=0 bytes_invalid=0 send_seq=24010 receive_seq=24010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998525  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.10 cputime=6094.237 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69556.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647567 bytes_read=10770902 bytes_retransmit=9 bytes_invalid=0 send_seq=1318227 receive_seq=1318227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008065 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144213 bytes_read=446062 bytes_retransmit=0 bytes_invalid=0 send_seq=24011 receive_seq=24011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999627 adj=49998553  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.10 cputime=6094.253 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69557.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647573 bytes_read=10771007 bytes_retransmit=9 bytes_invalid=0 send_seq=1318228 receive_seq=1318228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008061 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144219 bytes_read=446078 bytes_retransmit=0 bytes_invalid=0 send_seq=24012 receive_seq=24012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998547  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.09 cputime=6094.270 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69558.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647579 bytes_read=10771124 bytes_retransmit=9 bytes_invalid=0 send_seq=1318229 receive_seq=1318229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008065 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144225 bytes_read=446094 bytes_retransmit=0 bytes_invalid=0 send_seq=24013 receive_seq=24013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998535  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.286 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69559.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647585 bytes_read=10771245 bytes_retransmit=9 bytes_invalid=0 send_seq=1318230 receive_seq=1318230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008096 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144231 bytes_read=446110 bytes_retransmit=0 bytes_invalid=0 send_seq=24014 receive_seq=24014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999641 adj=49998547  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.09 cputime=6094.303 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69560.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647591 bytes_read=10771365 bytes_retransmit=9 bytes_invalid=0 send_seq=1318231 receive_seq=1318231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=144237 bytes_read=446139 bytes_retransmit=0 bytes_invalid=0 send_seq=24015 receive_seq=24015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999639 adj=49998766  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.319 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69561.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647597 bytes_read=10771486 bytes_retransmit=9 bytes_invalid=0 send_seq=1318232 receive_seq=1318232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=144243 bytes_read=446155 bytes_retransmit=0 bytes_invalid=0 send_seq=24016 receive_seq=24016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999637 adj=49998715  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.335 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69562.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647603 bytes_read=10771607 bytes_retransmit=9 bytes_invalid=0 send_seq=1318233 receive_seq=1318233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008083 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=144249 bytes_read=446171 bytes_retransmit=0 bytes_invalid=0 send_seq=24017 receive_seq=24017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999633 adj=49998666  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.352 memavail=3263744 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69563.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647609 bytes_read=10771713 bytes_retransmit=9 bytes_invalid=0 send_seq=1318234 receive_seq=1318234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008077 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=144255 bytes_read=446187 bytes_retransmit=0 bytes_invalid=0 send_seq=24018 receive_seq=24018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999633 adj=49998599  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.368 memavail=3263496 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69564.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647615 bytes_read=10771834 bytes_retransmit=9 bytes_invalid=0 send_seq=1318235 receive_seq=1318235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008074 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=144261 bytes_read=446203 bytes_retransmit=0 bytes_invalid=0 send_seq=24019 receive_seq=24019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999633 adj=49998607  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.385 memavail=3263496 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69565.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647621 bytes_read=10771969 bytes_retransmit=9 bytes_invalid=0 send_seq=1318236 receive_seq=1318236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008073 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144267 bytes_read=446232 bytes_retransmit=0 bytes_invalid=0 send_seq=24020 receive_seq=24020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999628 adj=49998622  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.402 memavail=3263496 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69566.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647627 bytes_read=10772075 bytes_retransmit=9 bytes_invalid=0 send_seq=1318237 receive_seq=1318237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008088 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144273 bytes_read=446248 bytes_retransmit=0 bytes_invalid=0 send_seq=24021 receive_seq=24021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999628 adj=49998540  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.09 cputime=6094.418 memavail=3263496 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69567.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647633 bytes_read=10772196 bytes_retransmit=9 bytes_invalid=0 send_seq=1318238 receive_seq=1318238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008089 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144279 bytes_read=446264 bytes_retransmit=0 bytes_invalid=0 send_seq=24022 receive_seq=24022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998536  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.08 cputime=6094.434 memavail=3263496 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69568.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647639 bytes_read=10772313 bytes_retransmit=9 bytes_invalid=0 send_seq=1318239 receive_seq=1318239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008091 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144285 bytes_read=446280 bytes_retransmit=0 bytes_invalid=0 send_seq=24023 receive_seq=24023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998521  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.08 cputime=6094.451 memavail=3263500 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69569.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647645 bytes_read=10772417 bytes_retransmit=9 bytes_invalid=0 send_seq=1318240 receive_seq=1318240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008092 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=144291 bytes_read=446296 bytes_retransmit=0 bytes_invalid=0 send_seq=24024 receive_seq=24024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999623 adj=49998520  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.08 cputime=6094.467 memavail=3263500 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69570.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647651 bytes_read=10772552 bytes_retransmit=9 bytes_invalid=0 send_seq=1318241 receive_seq=1318241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008089 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144297 bytes_read=446325 bytes_retransmit=0 bytes_invalid=0 send_seq=24025 receive_seq=24025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998510  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.08 cputime=6094.484 memavail=3263500 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.3 pwm=0.000
Stats 69571.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647657 bytes_read=10772673 bytes_retransmit=9 bytes_invalid=0 send_seq=1318242 receive_seq=1318242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144303 bytes_read=446341 bytes_retransmit=0 bytes_invalid=0 send_seq=24026 receive_seq=24026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999622 adj=49998576  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.08 cputime=6094.501 memavail=3263500 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69572.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647663 bytes_read=10772779 bytes_retransmit=9 bytes_invalid=0 send_seq=1318243 receive_seq=1318243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008087 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144309 bytes_read=446357 bytes_retransmit=0 bytes_invalid=0 send_seq=24027 receive_seq=24027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999619 adj=49998550  heater_bed: target=0 temp=30.2 pwm=0.000 sysload=0.07 cputime=6094.517 memavail=3263500 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Stats 69573.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=69647669 bytes_read=10772915 bytes_retransmit=9 bytes_invalid=0 send_seq=1318244 receive_seq=1318244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=144315 bytes_read=446373 bytes_retransmit=0 bytes_invalid=0 send_seq=24028 receive_seq=24028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998523  heater_bed: target=0 temp=30.1 pwm=0.000 sysload=0.07 cputime=6094.533 memavail=3264388 print_time=23546.514 buffer_time=0.000 print_stall=0 extruder: target=0 temp=31.2 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 06:44:57 2023 (1690537497.0 13.4)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548463300960: New connection
webhooks client 548463300960: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 17.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3321 bytes_read=6244 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400021994 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001508 adj=50006217  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.83 cputime=2.051 memavail=3334284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548463300960
webhooks: registering remote method 'reboot_machine' for connection id: 548463300960
webhooks: registering remote method 'pause_job_queue' for connection id: 548463300960
webhooks: registering remote method 'start_job_queue' for connection id: 548463300960
Stats 18.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3327 bytes_read=6350 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007497 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000289 adj=49995143  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.83 cputime=2.073 memavail=3362472 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 19.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000097 bytes_write=3333 bytes_read=6484 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400004777 host: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=825 bytes_read=4539 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000269 adj=49997231  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.83 cputime=2.083 memavail=3358688 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 20.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000097 bytes_write=3339 bytes_read=6605 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005330 host: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000149 adj=49998316  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.84 cputime=2.102 memavail=3328672 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 21.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000097 bytes_write=3345 bytes_read=6711 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005231 host: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000076 adj=49998252  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.84 cputime=2.111 memavail=3333108 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 22.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000097 bytes_write=3351 bytes_read=6832 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005208 host: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000414 adj=49998419  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.84 cputime=2.120 memavail=3344396 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 23.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000097 bytes_write=3357 bytes_read=6953 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006849 host: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000396 adj=49999545  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.84 cputime=2.129 memavail=3344524 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 24.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3363 bytes_read=7073 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006306 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=855 bytes_read=4632 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000199 adj=49998952  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.84 cputime=2.136 memavail=3344272 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 25.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3369 bytes_read=7194 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006261 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000259 adj=49998588  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.93 cputime=2.146 memavail=3317776 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 26.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3375 bytes_read=7311 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006313 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000151 adj=49999009  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.93 cputime=2.162 memavail=3334436 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 27.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3381 bytes_read=7417 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006422 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000158 adj=49998725  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.93 cputime=2.171 memavail=3311720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 28.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3387 bytes_read=7538 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006531 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000129 adj=49998859  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.93 cputime=2.181 memavail=3298628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 29.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3393 bytes_read=7673 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006562 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=885 bytes_read=4725 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000043 adj=49998813  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.93 cputime=2.189 memavail=3327620 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 30.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3399 bytes_read=7779 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006626 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000016 adj=49998740  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.86 cputime=2.196 memavail=3327128 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 31.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3405 bytes_read=7900 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006695 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000013 adj=49998709  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.86 cputime=2.204 memavail=3319464 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 32.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3411 bytes_read=8021 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006728 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999974 adj=49998774  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.86 cputime=2.212 memavail=3319464 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 33.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3417 bytes_read=8127 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006877 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999992 adj=49998669  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.86 cputime=2.223 memavail=3319716 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 34.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3423 bytes_read=8262 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006988 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=915 bytes_read=4818 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000002 adj=49998780  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.86 cputime=2.235 memavail=3319720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 35.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3429 bytes_read=8383 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007022 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999978 adj=49998849  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.79 cputime=2.242 memavail=3319748 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 36.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3435 bytes_read=8489 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007036 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999962 adj=49998764  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.79 cputime=2.249 memavail=3319508 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 37.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3441 bytes_read=8606 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007078 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000011 adj=49998752  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.79 cputime=2.258 memavail=3318756 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 38.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3447 bytes_read=8727 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007081 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000019 adj=49999085  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.79 cputime=2.265 memavail=3323004 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 39.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3459 bytes_read=8863 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007192 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=945 bytes_read=4911 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000031 adj=49999143  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.79 cputime=2.275 memavail=3322312 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 40.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3465 bytes_read=8984 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007253 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000043 adj=49999123  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.73 cputime=2.288 memavail=3321840 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 41.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3471 bytes_read=9105 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007311 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000039 adj=49999155  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.73 cputime=2.301 memavail=3321840 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 42.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3477 bytes_read=9211 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007384 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000043 adj=49999079  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.73 cputime=2.314 memavail=3321840 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 43.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3483 bytes_read=9332 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007391 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000030 adj=49999051  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.73 cputime=2.325 memavail=3320504 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 44.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3489 bytes_read=9467 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007392 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000220 adj=49998975  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.73 cputime=2.332 memavail=3320504 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 45.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3495 bytes_read=9573 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007375 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=981 bytes_read=5020 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000178 adj=50000343  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.59 cputime=2.339 memavail=3320504 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 46.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3501 bytes_read=9694 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007377 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=987 bytes_read=5036 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000142 adj=49999791  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.59 cputime=2.347 memavail=3320284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 47.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3507 bytes_read=9812 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007395 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=993 bytes_read=5052 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000109 adj=49999390  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.59 cputime=2.353 memavail=3320284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 48.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3513 bytes_read=9916 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007449 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=999 bytes_read=5068 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000099 adj=49999088  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.59 cputime=2.365 memavail=3320284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 49.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3519 bytes_read=10051 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007457 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1005 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000092 adj=49998981  heater_bed: target=0 temp=24.1 pwm=0.000 sysload=1.59 cputime=2.376 memavail=3320020 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 50.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3525 bytes_read=10172 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007461 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1011 bytes_read=5113 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000069 adj=49998960  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.46 cputime=2.383 memavail=3320028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 51.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3531 bytes_read=10278 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007452 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1017 bytes_read=5129 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000048 adj=49998822  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.46 cputime=2.389 memavail=3320028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 52.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3537 bytes_read=10399 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007462 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1023 bytes_read=5145 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000032 adj=49998742  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.46 cputime=2.396 memavail=3320028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 53.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3543 bytes_read=10520 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007463 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1029 bytes_read=5161 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000021 adj=49998690  heater_bed: target=0 temp=24.0 pwm=0.000 sysload=1.46 cputime=2.403 memavail=3320028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Resetting prediction variance 332.170: freq=50000144 diff=-26455 stddev=4563.184
Starting SD card print (position 0)
Stats 1020.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9451 bytes_read=125129 bytes_retransmit=9 bytes_invalid=0 send_seq=1299 receive_seq=1299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008102 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6921 bytes_read=23307 bytes_retransmit=0 bytes_invalid=0 send_seq=1129 receive_seq=1129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49997984 sd_pos=22300 heater_bed: target=60 temp=23.1 pwm=1.000 sysload=0.18 cputime=16.227 memavail=3317276 print_time=1025.742 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Heater heater_bed approaching new target of 60.000
Stats 1021.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9457 bytes_read=125250 bytes_retransmit=9 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008100 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6927 bytes_read=23323 bytes_retransmit=0 bytes_invalid=0 send_seq=1130 receive_seq=1130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999026 adj=49997989 sd_pos=22300 heater_bed: target=60 temp=23.4 pwm=1.000 sysload=0.25 cputime=16.246 memavail=3316896 print_time=1026.743 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1022.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9463 bytes_read=125371 bytes_retransmit=9 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008098 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6933 bytes_read=23339 bytes_retransmit=0 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999026 adj=49997982 sd_pos=22300 heater_bed: target=60 temp=23.5 pwm=1.000 sysload=0.25 cputime=16.265 memavail=3316896 print_time=1027.743 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1023.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9469 bytes_read=125477 bytes_retransmit=9 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008102 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=6939 bytes_read=23355 bytes_retransmit=0 bytes_invalid=0 send_seq=1132 receive_seq=1132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999026 adj=49997987 sd_pos=22300 heater_bed: target=60 temp=23.7 pwm=1.000 sysload=0.25 cputime=16.283 memavail=3317044 print_time=1028.744 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1024.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9491 bytes_read=125603 bytes_retransmit=9 bytes_invalid=0 send_seq=1304 receive_seq=1304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008115 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6945 bytes_read=23384 bytes_retransmit=0 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999029 adj=49997996 sd_pos=22300 heater_bed: target=60 temp=24.0 pwm=1.000 sysload=0.25 cputime=16.303 memavail=3317152 print_time=1029.744 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1025.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9497 bytes_read=125733 bytes_retransmit=9 bytes_invalid=0 send_seq=1305 receive_seq=1305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008124 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6951 bytes_read=23400 bytes_retransmit=0 bytes_invalid=0 send_seq=1134 receive_seq=1134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49998012 sd_pos=22300 heater_bed: target=60 temp=24.3 pwm=1.000 sysload=0.25 cputime=16.322 memavail=3317152 print_time=1030.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1026.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9503 bytes_read=125839 bytes_retransmit=9 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6957 bytes_read=23416 bytes_retransmit=0 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49998042 sd_pos=22300 heater_bed: target=60 temp=24.6 pwm=1.000 sysload=0.23 cputime=16.341 memavail=3317152 print_time=1031.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1027.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9509 bytes_read=125960 bytes_retransmit=9 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008143 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6963 bytes_read=23432 bytes_retransmit=0 bytes_invalid=0 send_seq=1136 receive_seq=1136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999041 adj=49998107 sd_pos=22300 heater_bed: target=60 temp=25.0 pwm=1.000 sysload=0.23 cputime=16.361 memavail=3316656 print_time=1032.747 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1028.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9526 bytes_read=126081 bytes_retransmit=9 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008146 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=6969 bytes_read=23448 bytes_retransmit=0 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999041 adj=49998119 sd_pos=22300 heater_bed: target=60 temp=25.3 pwm=1.000 sysload=0.23 cputime=16.380 memavail=3316656 print_time=1033.747 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1029.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9532 bytes_read=126187 bytes_retransmit=9 bytes_invalid=0 send_seq=1309 receive_seq=1309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008142 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=6975 bytes_read=23477 bytes_retransmit=0 bytes_invalid=0 send_seq=1138 receive_seq=1138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999041 adj=49998092 sd_pos=22300 heater_bed: target=60 temp=25.6 pwm=1.000 sysload=0.23 cputime=16.397 memavail=3316656 print_time=1034.748 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1030.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9538 bytes_read=126308 bytes_retransmit=9 bytes_invalid=0 send_seq=1310 receive_seq=1310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008146 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=6981 bytes_read=23493 bytes_retransmit=0 bytes_invalid=0 send_seq=1139 receive_seq=1139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998084 sd_pos=22300 heater_bed: target=60 temp=26.0 pwm=1.000 sysload=0.23 cputime=16.417 memavail=3316656 print_time=1035.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 1031.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9544 bytes_read=126443 bytes_retransmit=9 bytes_invalid=0 send_seq=1311 receive_seq=1311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008149 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=6987 bytes_read=23509 bytes_retransmit=0 bytes_invalid=0 send_seq=1140 receive_seq=1140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999046 adj=49998102 sd_pos=22300 heater_bed: target=60 temp=26.3 pwm=1.000 sysload=0.21 cputime=16.436 memavail=3316656 print_time=1036.750 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1032.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9550 bytes_read=126549 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008160 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=6993 bytes_read=23525 bytes_retransmit=0 bytes_invalid=0 send_seq=1141 receive_seq=1141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999049 adj=49998121 sd_pos=22300 heater_bed: target=60 temp=26.7 pwm=1.000 sysload=0.21 cputime=16.454 memavail=3316656 print_time=1037.751 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1033.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9572 bytes_read=126675 bytes_retransmit=9 bytes_invalid=0 send_seq=1314 receive_seq=1314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008161 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=6999 bytes_read=23541 bytes_retransmit=0 bytes_invalid=0 send_seq=1142 receive_seq=1142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999047 adj=49998121 sd_pos=22300 heater_bed: target=60 temp=27.1 pwm=1.000 sysload=0.21 cputime=16.474 memavail=3316656 print_time=1038.751 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1034.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9578 bytes_read=126796 bytes_retransmit=9 bytes_invalid=0 send_seq=1315 receive_seq=1315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7005 bytes_read=23570 bytes_retransmit=0 bytes_invalid=0 send_seq=1143 receive_seq=1143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999047 adj=49998064 sd_pos=22300 heater_bed: target=60 temp=27.6 pwm=1.000 sysload=0.21 cputime=16.493 memavail=3316656 print_time=1039.752 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1035.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9584 bytes_read=126901 bytes_retransmit=9 bytes_invalid=0 send_seq=1316 receive_seq=1316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008166 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7011 bytes_read=23586 bytes_retransmit=0 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999047 adj=49998042 sd_pos=22300 heater_bed: target=60 temp=27.9 pwm=1.000 sysload=0.21 cputime=16.512 memavail=3316660 print_time=1040.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1036.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9590 bytes_read=127032 bytes_retransmit=9 bytes_invalid=0 send_seq=1317 receive_seq=1317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008159 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7017 bytes_read=23602 bytes_retransmit=0 bytes_invalid=0 send_seq=1145 receive_seq=1145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999046 adj=49998035 sd_pos=22300 heater_bed: target=60 temp=28.3 pwm=1.000 sysload=0.19 cputime=16.531 memavail=3316660 print_time=1041.754 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1037.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9612 bytes_read=127158 bytes_retransmit=9 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008158 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7023 bytes_read=23618 bytes_retransmit=0 bytes_invalid=0 send_seq=1146 receive_seq=1146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49998037 sd_pos=22300 heater_bed: target=60 temp=28.7 pwm=1.000 sysload=0.19 cputime=16.550 memavail=3315428 print_time=1042.754 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1038.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9618 bytes_read=127264 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008159 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7029 bytes_read=23634 bytes_retransmit=0 bytes_invalid=0 send_seq=1147 receive_seq=1147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49998023 sd_pos=22300 heater_bed: target=60 temp=29.0 pwm=1.000 sysload=0.19 cputime=16.569 memavail=3315428 print_time=1043.755 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1039.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9624 bytes_read=127385 bytes_retransmit=9 bytes_invalid=0 send_seq=1321 receive_seq=1321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008167 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7035 bytes_read=23663 bytes_retransmit=0 bytes_invalid=0 send_seq=1148 receive_seq=1148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998010 sd_pos=22300 heater_bed: target=60 temp=29.5 pwm=1.000 sysload=0.19 cputime=16.589 memavail=3315428 print_time=1044.755 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1040.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9630 bytes_read=127506 bytes_retransmit=9 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008177 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7041 bytes_read=23678 bytes_retransmit=0 bytes_invalid=0 send_seq=1149 receive_seq=1149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999049 adj=49997995 sd_pos=22300 heater_bed: target=60 temp=29.9 pwm=1.000 sysload=0.19 cputime=16.608 memavail=3315432 print_time=1045.755 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1041.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9652 bytes_read=127631 bytes_retransmit=9 bytes_invalid=0 send_seq=1324 receive_seq=1324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008182 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7047 bytes_read=23693 bytes_retransmit=0 bytes_invalid=0 send_seq=1150 receive_seq=1150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999048 adj=49998053 sd_pos=22300 heater_bed: target=60 temp=30.2 pwm=1.000 sysload=0.18 cputime=16.627 memavail=3315432 print_time=1046.757 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1042.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9658 bytes_read=127752 bytes_retransmit=9 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008180 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7053 bytes_read=23708 bytes_retransmit=0 bytes_invalid=0 send_seq=1151 receive_seq=1151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999049 adj=49998031 sd_pos=22300 heater_bed: target=60 temp=30.7 pwm=1.000 sysload=0.18 cputime=16.646 memavail=3315432 print_time=1047.758 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1043.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9664 bytes_read=127873 bytes_retransmit=9 bytes_invalid=0 send_seq=1326 receive_seq=1326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7059 bytes_read=23723 bytes_retransmit=0 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999051 adj=49998034 sd_pos=22300 heater_bed: target=60 temp=31.0 pwm=1.000 sysload=0.18 cputime=16.665 memavail=3315432 print_time=1048.758 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1044.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9670 bytes_read=127979 bytes_retransmit=9 bytes_invalid=0 send_seq=1327 receive_seq=1327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008177 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7065 bytes_read=23751 bytes_retransmit=0 bytes_invalid=0 send_seq=1153 receive_seq=1153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999053 adj=49998069 sd_pos=22300 heater_bed: target=60 temp=31.4 pwm=1.000 sysload=0.18 cputime=16.684 memavail=3314680 print_time=1049.759 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1045.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9692 bytes_read=128105 bytes_retransmit=9 bytes_invalid=0 send_seq=1329 receive_seq=1329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7071 bytes_read=23767 bytes_retransmit=0 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999054 adj=49998091 sd_pos=22300 heater_bed: target=60 temp=31.9 pwm=1.000 sysload=0.18 cputime=16.704 memavail=3314680 print_time=1050.760 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1046.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9698 bytes_read=128236 bytes_retransmit=9 bytes_invalid=0 send_seq=1330 receive_seq=1330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008176 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7077 bytes_read=23783 bytes_retransmit=0 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999055 adj=49998083 sd_pos=22300 heater_bed: target=60 temp=32.2 pwm=1.000 sysload=0.16 cputime=16.722 memavail=3314680 print_time=1051.761 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1047.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9704 bytes_read=128341 bytes_retransmit=9 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7083 bytes_read=23799 bytes_retransmit=0 bytes_invalid=0 send_seq=1156 receive_seq=1156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999052 adj=49998100 sd_pos=22300 heater_bed: target=60 temp=32.6 pwm=1.000 sysload=0.16 cputime=16.740 memavail=3314684 print_time=1052.761 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1048.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9710 bytes_read=128462 bytes_retransmit=9 bytes_invalid=0 send_seq=1332 receive_seq=1332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7089 bytes_read=23815 bytes_retransmit=0 bytes_invalid=0 send_seq=1157 receive_seq=1157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999050 adj=49998048 sd_pos=22300 heater_bed: target=60 temp=33.0 pwm=1.000 sysload=0.16 cputime=16.760 memavail=3314684 print_time=1053.762 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1049.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9732 bytes_read=128588 bytes_retransmit=9 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7095 bytes_read=23844 bytes_retransmit=0 bytes_invalid=0 send_seq=1158 receive_seq=1158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999048 adj=49998020 sd_pos=22300 heater_bed: target=60 temp=33.4 pwm=1.000 sysload=0.16 cputime=16.779 memavail=3314684 print_time=1054.763 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1050.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9738 bytes_read=128694 bytes_retransmit=9 bytes_invalid=0 send_seq=1335 receive_seq=1335 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008186 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7107 bytes_read=23876 bytes_retransmit=0 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999050 adj=49997970 sd_pos=22300 heater_bed: target=60 temp=33.7 pwm=1.000 sysload=0.16 cputime=16.800 memavail=3314684 print_time=1055.764 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1051.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9744 bytes_read=128844 bytes_retransmit=9 bytes_invalid=0 send_seq=1336 receive_seq=1336 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008192 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7113 bytes_read=23892 bytes_retransmit=0 bytes_invalid=0 send_seq=1161 receive_seq=1161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999054 adj=49998000 sd_pos=22300 heater_bed: target=60 temp=34.1 pwm=1.000 sysload=0.15 cputime=16.820 memavail=3314684 print_time=1056.765 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1052.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9750 bytes_read=128950 bytes_retransmit=9 bytes_invalid=0 send_seq=1337 receive_seq=1337 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008194 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7119 bytes_read=23908 bytes_retransmit=0 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999056 adj=49998057 sd_pos=22300 heater_bed: target=60 temp=34.5 pwm=1.000 sysload=0.15 cputime=16.839 memavail=3314684 print_time=1057.765 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1053.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9756 bytes_read=129056 bytes_retransmit=9 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008196 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7125 bytes_read=23924 bytes_retransmit=0 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999058 adj=49998072 sd_pos=22300 heater_bed: target=60 temp=34.8 pwm=1.000 sysload=0.15 cputime=16.858 memavail=3314684 print_time=1058.767 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1054.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9778 bytes_read=129197 bytes_retransmit=9 bytes_invalid=0 send_seq=1340 receive_seq=1340 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008203 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7131 bytes_read=23940 bytes_retransmit=0 bytes_invalid=0 send_seq=1164 receive_seq=1164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999060 adj=49998089 sd_pos=22300 heater_bed: target=60 temp=35.3 pwm=1.000 sysload=0.15 cputime=16.878 memavail=3314684 print_time=1059.770 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 1055.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9784 bytes_read=129303 bytes_retransmit=9 bytes_invalid=0 send_seq=1341 receive_seq=1341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7137 bytes_read=23969 bytes_retransmit=0 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999059 adj=49998095 sd_pos=22300 heater_bed: target=60 temp=35.6 pwm=1.000 sysload=0.15 cputime=16.896 memavail=3314684 print_time=1060.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1056.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9790 bytes_read=129423 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7143 bytes_read=23985 bytes_retransmit=0 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999059 adj=49998077 sd_pos=22300 heater_bed: target=60 temp=35.9 pwm=1.000 sysload=0.14 cputime=16.915 memavail=3314684 print_time=1061.771 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1057.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9796 bytes_read=129555 bytes_retransmit=9 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008195 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7149 bytes_read=24001 bytes_retransmit=0 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999057 adj=49998073 sd_pos=22300 heater_bed: target=60 temp=36.4 pwm=1.000 sysload=0.14 cputime=16.934 memavail=3314944 print_time=1062.772 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1058.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9818 bytes_read=129666 bytes_retransmit=9 bytes_invalid=0 send_seq=1345 receive_seq=1345 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008188 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7155 bytes_read=24017 bytes_retransmit=0 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999055 adj=49998032 sd_pos=22300 heater_bed: target=60 temp=36.7 pwm=1.000 sysload=0.14 cputime=16.953 memavail=3314944 print_time=1063.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1059.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9824 bytes_read=129772 bytes_retransmit=9 bytes_invalid=0 send_seq=1346 receive_seq=1346 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008190 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7161 bytes_read=24033 bytes_retransmit=0 bytes_invalid=0 send_seq=1169 receive_seq=1169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999052 adj=49998022 sd_pos=22300 heater_bed: target=60 temp=37.1 pwm=1.000 sysload=0.14 cputime=16.971 memavail=3314944 print_time=1064.773 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1060.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9830 bytes_read=129908 bytes_retransmit=9 bytes_invalid=0 send_seq=1347 receive_seq=1347 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008184 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7167 bytes_read=24062 bytes_retransmit=0 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999051 adj=49997976 sd_pos=22300 heater_bed: target=60 temp=37.5 pwm=1.000 sysload=0.14 cputime=16.990 memavail=3314944 print_time=1065.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1061.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9836 bytes_read=130028 bytes_retransmit=9 bytes_invalid=0 send_seq=1348 receive_seq=1348 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008196 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7173 bytes_read=24078 bytes_retransmit=0 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999048 adj=49997974 sd_pos=22300 heater_bed: target=60 temp=37.8 pwm=1.000 sysload=0.13 cputime=17.008 memavail=3314944 print_time=1066.775 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1062.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9858 bytes_read=130139 bytes_retransmit=9 bytes_invalid=0 send_seq=1350 receive_seq=1350 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008194 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7179 bytes_read=24094 bytes_retransmit=0 bytes_invalid=0 send_seq=1172 receive_seq=1172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49997926 sd_pos=22300 heater_bed: target=60 temp=38.1 pwm=1.000 sysload=0.13 cputime=17.027 memavail=3314944 print_time=1067.776 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1063.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9864 bytes_read=130275 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008193 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7185 bytes_read=24110 bytes_retransmit=0 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49997910 sd_pos=22300 heater_bed: target=60 temp=38.6 pwm=1.000 sysload=0.13 cputime=17.047 memavail=3314944 print_time=1068.776 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1064.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9870 bytes_read=130381 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008191 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7191 bytes_read=24126 bytes_retransmit=0 bytes_invalid=0 send_seq=1174 receive_seq=1174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999041 adj=49997899 sd_pos=22300 heater_bed: target=60 temp=39.0 pwm=1.000 sysload=0.13 cputime=17.065 memavail=3314944 print_time=1069.777 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1065.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9876 bytes_read=130487 bytes_retransmit=9 bytes_invalid=0 send_seq=1353 receive_seq=1353 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008191 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7197 bytes_read=24155 bytes_retransmit=0 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49997909 sd_pos=22300 heater_bed: target=60 temp=39.2 pwm=1.000 sysload=0.13 cputime=17.085 memavail=3314944 print_time=1070.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1066.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9898 bytes_read=130642 bytes_retransmit=9 bytes_invalid=0 send_seq=1355 receive_seq=1355 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7203 bytes_read=24171 bytes_retransmit=0 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49997964 sd_pos=22300 heater_bed: target=60 temp=39.7 pwm=1.000 sysload=0.12 cputime=17.104 memavail=3314944 print_time=1071.778 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1067.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9904 bytes_read=130748 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008206 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7209 bytes_read=24187 bytes_retransmit=0 bytes_invalid=0 send_seq=1177 receive_seq=1177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49997982 sd_pos=22300 heater_bed: target=60 temp=40.0 pwm=1.000 sysload=0.12 cputime=17.123 memavail=3314952 print_time=1072.779 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1068.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9910 bytes_read=130850 bytes_retransmit=9 bytes_invalid=0 send_seq=1357 receive_seq=1357 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008213 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7215 bytes_read=24203 bytes_retransmit=0 bytes_invalid=0 send_seq=1178 receive_seq=1178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999068 adj=49997991 sd_pos=22300 heater_bed: target=60 temp=40.3 pwm=1.000 sysload=0.12 cputime=17.142 memavail=3314952 print_time=1073.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1069.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9916 bytes_read=130986 bytes_retransmit=9 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008222 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7221 bytes_read=24219 bytes_retransmit=0 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999069 adj=49998335 sd_pos=22300 heater_bed: target=60 temp=40.7 pwm=1.000 sysload=0.12 cputime=17.163 memavail=3314952 print_time=1074.780 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1070.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9938 bytes_read=131097 bytes_retransmit=9 bytes_invalid=0 send_seq=1360 receive_seq=1360 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008226 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7227 bytes_read=24248 bytes_retransmit=0 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999071 adj=49998272 sd_pos=22300 heater_bed: target=60 temp=41.0 pwm=1.000 sysload=0.12 cputime=17.183 memavail=3314952 print_time=1075.781 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1071.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9944 bytes_read=131217 bytes_retransmit=9 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7233 bytes_read=24264 bytes_retransmit=0 bytes_invalid=0 send_seq=1181 receive_seq=1181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999073 adj=49998229 sd_pos=22300 heater_bed: target=60 temp=41.4 pwm=1.000 sysload=0.11 cputime=17.203 memavail=3314956 print_time=1076.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1072.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9950 bytes_read=131353 bytes_retransmit=9 bytes_invalid=0 send_seq=1362 receive_seq=1362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008221 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7239 bytes_read=24280 bytes_retransmit=0 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999069 adj=49998216 sd_pos=22300 heater_bed: target=60 temp=41.8 pwm=1.000 sysload=0.11 cputime=17.223 memavail=3314956 print_time=1077.782 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1073.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9956 bytes_read=131459 bytes_retransmit=9 bytes_invalid=0 send_seq=1363 receive_seq=1363 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008244 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7245 bytes_read=24296 bytes_retransmit=0 bytes_invalid=0 send_seq=1183 receive_seq=1183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999064 adj=49998123 sd_pos=22300 heater_bed: target=60 temp=42.1 pwm=1.000 sysload=0.11 cputime=17.242 memavail=3314956 print_time=1078.783 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1074.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9962 bytes_read=131565 bytes_retransmit=9 bytes_invalid=0 send_seq=1364 receive_seq=1364 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008234 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7251 bytes_read=24312 bytes_retransmit=0 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999060 adj=49997975 sd_pos=22300 heater_bed: target=60 temp=42.4 pwm=1.000 sysload=0.11 cputime=17.260 memavail=3314704 print_time=1079.784 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1075.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9984 bytes_read=131706 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008224 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7257 bytes_read=24341 bytes_retransmit=0 bytes_invalid=0 send_seq=1185 receive_seq=1185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999056 adj=49997945 sd_pos=22300 heater_bed: target=60 temp=42.8 pwm=1.000 sysload=0.11 cputime=17.280 memavail=3314704 print_time=1080.784 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1076.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9990 bytes_read=131826 bytes_retransmit=9 bytes_invalid=0 send_seq=1367 receive_seq=1367 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008220 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7263 bytes_read=24357 bytes_retransmit=0 bytes_invalid=0 send_seq=1186 receive_seq=1186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999055 adj=49997934 sd_pos=22300 heater_bed: target=60 temp=43.1 pwm=1.000 sysload=0.10 cputime=17.299 memavail=3314704 print_time=1081.785 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1077.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=9996 bytes_read=131932 bytes_retransmit=9 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008219 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7269 bytes_read=24373 bytes_retransmit=0 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999054 adj=49997947 sd_pos=22300 heater_bed: target=60 temp=43.4 pwm=1.000 sysload=0.10 cputime=17.318 memavail=3314456 print_time=1082.785 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1078.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10002 bytes_read=132065 bytes_retransmit=9 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008219 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7275 bytes_read=24389 bytes_retransmit=0 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999053 adj=49997954 sd_pos=22300 heater_bed: target=60 temp=43.8 pwm=1.000 sysload=0.10 cputime=17.338 memavail=3314456 print_time=1083.786 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1079.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10024 bytes_read=132173 bytes_retransmit=9 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008219 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7281 bytes_read=24405 bytes_retransmit=0 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999051 adj=49997949 sd_pos=22300 heater_bed: target=60 temp=44.1 pwm=1.000 sysload=0.10 cputime=17.358 memavail=3314456 print_time=1084.787 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1080.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10030 bytes_read=132279 bytes_retransmit=9 bytes_invalid=0 send_seq=1372 receive_seq=1372 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008216 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=7287 bytes_read=24434 bytes_retransmit=0 bytes_invalid=0 send_seq=1190 receive_seq=1190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999052 adj=49997937 sd_pos=22300 heater_bed: target=60 temp=44.4 pwm=1.000 sysload=0.10 cputime=17.378 memavail=3314456 print_time=1085.788 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1081.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10036 bytes_read=132429 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008219 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=7293 bytes_read=24450 bytes_retransmit=0 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999053 adj=49997980 sd_pos=22300 heater_bed: target=60 temp=44.8 pwm=1.000 sysload=0.09 cputime=17.398 memavail=3314456 print_time=1086.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 1082.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10048 bytes_read=132551 bytes_retransmit=9 bytes_invalid=0 send_seq=1375 receive_seq=1375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008222 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=7299 bytes_read=24466 bytes_retransmit=0 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999053 adj=49998005 sd_pos=22300 heater_bed: target=60 temp=45.1 pwm=1.000 sysload=0.09 cputime=17.416 memavail=3314456 print_time=1087.790 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1083.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10070 bytes_read=132677 bytes_retransmit=9 bytes_invalid=0 send_seq=1377 receive_seq=1377 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008238 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=7305 bytes_read=24482 bytes_retransmit=0 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999052 adj=49998003 sd_pos=22300 heater_bed: target=60 temp=45.5 pwm=1.000 sysload=0.09 cputime=17.435 memavail=3314456 print_time=1088.790 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1084.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10076 bytes_read=132798 bytes_retransmit=9 bytes_invalid=0 send_seq=1378 receive_seq=1378 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008233 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=7311 bytes_read=24498 bytes_retransmit=0 bytes_invalid=0 send_seq=1194 receive_seq=1194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999048 adj=49997960 sd_pos=22300 heater_bed: target=60 temp=45.8 pwm=1.000 sysload=0.09 cputime=17.454 memavail=3314456 print_time=1089.791 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1085.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10082 bytes_read=132904 bytes_retransmit=9 bytes_invalid=0 send_seq=1379 receive_seq=1379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7317 bytes_read=24527 bytes_retransmit=0 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49997924 sd_pos=22300 heater_bed: target=60 temp=46.1 pwm=1.000 sysload=0.09 cputime=17.473 memavail=3314456 print_time=1090.792 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1086.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10088 bytes_read=133039 bytes_retransmit=9 bytes_invalid=0 send_seq=1380 receive_seq=1380 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7323 bytes_read=24543 bytes_retransmit=0 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999040 adj=49997897 sd_pos=22300 heater_bed: target=60 temp=46.5 pwm=1.000 sysload=0.08 cputime=17.493 memavail=3314456 print_time=1091.793 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1087.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10110 bytes_read=133165 bytes_retransmit=9 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008216 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7329 bytes_read=24559 bytes_retransmit=0 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999038 adj=49997880 sd_pos=22300 heater_bed: target=60 temp=46.8 pwm=1.000 sysload=0.08 cputime=17.512 memavail=3314232 print_time=1092.793 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1088.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10116 bytes_read=133271 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008206 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7335 bytes_read=24575 bytes_retransmit=0 bytes_invalid=0 send_seq=1198 receive_seq=1198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999035 adj=49997894 sd_pos=22300 heater_bed: target=60 temp=47.1 pwm=1.000 sysload=0.08 cputime=17.530 memavail=3314240 print_time=1093.794 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1089.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10122 bytes_read=133387 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008204 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=7341 bytes_read=24591 bytes_retransmit=0 bytes_invalid=0 send_seq=1199 receive_seq=1199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999031 adj=49997886 sd_pos=22300 heater_bed: target=60 temp=47.5 pwm=1.000 sysload=0.08 cputime=17.549 memavail=3314240 print_time=1094.795 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1090.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10128 bytes_read=133508 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008203 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7347 bytes_read=24620 bytes_retransmit=0 bytes_invalid=0 send_seq=1200 receive_seq=1200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999028 adj=49997865 sd_pos=22300 heater_bed: target=60 temp=47.8 pwm=1.000 sysload=0.08 cputime=17.568 memavail=3314240 print_time=1095.796 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1091.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10145 bytes_read=133628 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008204 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7353 bytes_read=24636 bytes_retransmit=0 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999026 adj=49997862 sd_pos=22300 heater_bed: target=60 temp=48.1 pwm=1.000 sysload=0.08 cputime=17.587 memavail=3314008 print_time=1096.796 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1092.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10151 bytes_read=133749 bytes_retransmit=9 bytes_invalid=0 send_seq=1387 receive_seq=1387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008204 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7359 bytes_read=24652 bytes_retransmit=0 bytes_invalid=0 send_seq=1202 receive_seq=1202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999026 adj=49997859 sd_pos=22300 heater_bed: target=60 temp=48.5 pwm=1.000 sysload=0.08 cputime=17.606 memavail=3314008 print_time=1097.796 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1093.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10157 bytes_read=133870 bytes_retransmit=9 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008208 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7365 bytes_read=24668 bytes_retransmit=0 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999033 adj=49997893 sd_pos=22300 heater_bed: target=60 temp=48.8 pwm=1.000 sysload=0.08 cputime=17.626 memavail=3314008 print_time=1098.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1094.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10163 bytes_read=133976 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008208 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7371 bytes_read=24684 bytes_retransmit=0 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999039 adj=49998028 sd_pos=22300 heater_bed: target=60 temp=49.1 pwm=1.000 sysload=0.08 cputime=17.645 memavail=3314008 print_time=1099.797 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1095.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10169 bytes_read=134097 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008212 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7377 bytes_read=24713 bytes_retransmit=0 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999039 adj=49998110 sd_pos=22300 heater_bed: target=60 temp=49.5 pwm=1.000 sysload=0.08 cputime=17.665 memavail=3314008 print_time=1100.798 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1096.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10191 bytes_read=134237 bytes_retransmit=9 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008215 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7383 bytes_read=24729 bytes_retransmit=0 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49998081 sd_pos=22300 heater_bed: target=60 temp=49.8 pwm=1.000 sysload=0.07 cputime=17.684 memavail=3314008 print_time=1101.799 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1097.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10197 bytes_read=134343 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008218 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7389 bytes_read=24745 bytes_retransmit=0 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999042 adj=49998115 sd_pos=22300 heater_bed: target=60 temp=50.0 pwm=1.000 sysload=0.07 cputime=17.702 memavail=3313764 print_time=1102.800 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1098.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10203 bytes_read=134464 bytes_retransmit=9 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008215 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7395 bytes_read=24761 bytes_retransmit=0 bytes_invalid=0 send_seq=1208 receive_seq=1208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999041 adj=49998078 sd_pos=22300 heater_bed: target=60 temp=50.4 pwm=1.000 sysload=0.07 cputime=17.720 memavail=3313764 print_time=1103.800 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1099.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10209 bytes_read=134585 bytes_retransmit=9 bytes_invalid=0 send_seq=1395 receive_seq=1395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008217 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7401 bytes_read=24777 bytes_retransmit=0 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999040 adj=49998040 sd_pos=22300 heater_bed: target=60 temp=50.7 pwm=1.000 sysload=0.07 cputime=17.740 memavail=3313764 print_time=1104.801 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1100.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10263 bytes_read=134700 bytes_retransmit=9 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008214 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7407 bytes_read=24806 bytes_retransmit=0 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999040 adj=49998020 sd_pos=22300 heater_bed: target=60 temp=51.0 pwm=0.980 sysload=0.07 cputime=17.760 memavail=3313764 print_time=1105.802 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1101.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10269 bytes_read=134835 bytes_retransmit=9 bytes_invalid=0 send_seq=1400 receive_seq=1400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008212 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7413 bytes_read=24822 bytes_retransmit=0 bytes_invalid=0 send_seq=1211 receive_seq=1211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49998027 sd_pos=22300 heater_bed: target=60 temp=51.4 pwm=0.919 sysload=0.06 cputime=17.778 memavail=3313764 print_time=1106.802 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1102.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10339 bytes_read=134976 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008199 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7419 bytes_read=24838 bytes_retransmit=0 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49997980 sd_pos=22300 heater_bed: target=60 temp=51.7 pwm=0.790 sysload=0.06 cputime=17.798 memavail=3313764 print_time=1107.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1103.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10361 bytes_read=135087 bytes_retransmit=9 bytes_invalid=0 send_seq=1407 receive_seq=1407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7425 bytes_read=24854 bytes_retransmit=0 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999034 adj=49997989 sd_pos=22300 heater_bed: target=60 temp=51.9 pwm=0.979 sysload=0.06 cputime=17.818 memavail=3313764 print_time=1108.804 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1104.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10415 bytes_read=135223 bytes_retransmit=9 bytes_invalid=0 send_seq=1411 receive_seq=1411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000026 bytes_write=7431 bytes_read=24870 bytes_retransmit=0 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999035 adj=49997972 sd_pos=22300 heater_bed: target=60 temp=52.3 pwm=0.742 sysload=0.06 cputime=17.839 memavail=3313764 print_time=1109.805 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1105.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10448 bytes_read=135349 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008239 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7437 bytes_read=24899 bytes_retransmit=0 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999033 adj=49997987 sd_pos=22300 heater_bed: target=60 temp=52.5 pwm=0.913 sysload=0.06 cputime=17.860 memavail=3313764 print_time=1110.805 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1106.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10486 bytes_read=135479 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008239 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7443 bytes_read=24915 bytes_retransmit=0 bytes_invalid=0 send_seq=1216 receive_seq=1216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999035 adj=49997889 sd_pos=22300 heater_bed: target=60 temp=52.7 pwm=0.898 sysload=0.06 cputime=17.880 memavail=3313764 print_time=1111.807 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1107.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10508 bytes_read=135605 bytes_retransmit=9 bytes_invalid=0 send_seq=1418 receive_seq=1418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008239 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7449 bytes_read=24931 bytes_retransmit=0 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49997944 sd_pos=22300 heater_bed: target=60 temp=53.1 pwm=0.884 sysload=0.06 cputime=17.899 memavail=3313452 print_time=1112.808 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1108.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10546 bytes_read=135736 bytes_retransmit=9 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008254 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7455 bytes_read=24947 bytes_retransmit=0 bytes_invalid=0 send_seq=1218 receive_seq=1218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999038 adj=49997990 sd_pos=22300 heater_bed: target=60 temp=53.3 pwm=0.797 sysload=0.06 cputime=17.920 memavail=3313516 print_time=1113.809 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1109.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10584 bytes_read=135852 bytes_retransmit=9 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008238 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7461 bytes_read=24963 bytes_retransmit=0 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999039 adj=49997992 sd_pos=22300 heater_bed: target=60 temp=53.5 pwm=0.774 sysload=0.06 cputime=17.940 memavail=3313516 print_time=1114.809 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1110.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10638 bytes_read=135987 bytes_retransmit=9 bytes_invalid=0 send_seq=1428 receive_seq=1428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008231 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=7467 bytes_read=24992 bytes_retransmit=0 bytes_invalid=0 send_seq=1220 receive_seq=1220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999040 adj=49998044 sd_pos=22300 heater_bed: target=60 temp=53.8 pwm=0.755 sysload=0.06 cputime=17.962 memavail=3313516 print_time=1115.810 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1111.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10676 bytes_read=136128 bytes_retransmit=9 bytes_invalid=0 send_seq=1431 receive_seq=1431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008229 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=7473 bytes_read=25008 bytes_retransmit=0 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998063 sd_pos=22300 heater_bed: target=60 temp=54.0 pwm=0.871 sysload=0.05 cputime=17.983 memavail=3313516 print_time=1116.811 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1112.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10725 bytes_read=136244 bytes_retransmit=9 bytes_invalid=0 send_seq=1434 receive_seq=1434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008220 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=7485 bytes_read=25040 bytes_retransmit=0 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999038 adj=49998113 sd_pos=22300 heater_bed: target=60 temp=54.3 pwm=0.660 sysload=0.05 cputime=18.002 memavail=3313516 print_time=1117.812 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1113.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10779 bytes_read=136380 bytes_retransmit=9 bytes_invalid=0 send_seq=1438 receive_seq=1438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008209 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=7491 bytes_read=25056 bytes_retransmit=0 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49998012 sd_pos=22300 heater_bed: target=60 temp=54.5 pwm=0.825 sysload=0.05 cputime=18.022 memavail=3313516 print_time=1118.813 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1114.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10817 bytes_read=136511 bytes_retransmit=9 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008207 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=7497 bytes_read=25072 bytes_retransmit=0 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999034 adj=49998009 sd_pos=22300 heater_bed: target=60 temp=54.8 pwm=0.615 sysload=0.05 cputime=18.041 memavail=3313516 print_time=1119.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1115.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10871 bytes_read=136632 bytes_retransmit=9 bytes_invalid=0 send_seq=1445 receive_seq=1445 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008207 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=7503 bytes_read=25101 bytes_retransmit=0 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49997975 sd_pos=22300 heater_bed: target=60 temp=54.9 pwm=0.910 sysload=0.05 cputime=18.061 memavail=3313516 print_time=1120.814 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1116.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10909 bytes_read=136777 bytes_retransmit=9 bytes_invalid=0 send_seq=1448 receive_seq=1448 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008236 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=7509 bytes_read=25117 bytes_retransmit=0 bytes_invalid=0 send_seq=1227 receive_seq=1227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999030 adj=49997949 sd_pos=22300 heater_bed: target=60 temp=55.2 pwm=0.611 sysload=0.05 cputime=18.081 memavail=3313516 print_time=1121.815 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Heater heater_bed within range of 60.000
Stats 1117.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=10979 bytes_read=136918 bytes_retransmit=9 bytes_invalid=0 send_seq=1453 receive_seq=1453 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008229 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=7515 bytes_read=25133 bytes_retransmit=0 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49997874 sd_pos=22300 heater_bed: target=60 temp=55.4 pwm=0.658 sysload=0.05 cputime=18.102 memavail=3314032 print_time=1122.820 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1118.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11001 bytes_read=137029 bytes_retransmit=9 bytes_invalid=0 send_seq=1455 receive_seq=1455 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008247 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=7521 bytes_read=25149 bytes_retransmit=0 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49997887 sd_pos=22300 heater_bed: target=60 temp=55.6 pwm=0.752 sysload=0.05 cputime=18.121 memavail=3314032 print_time=1123.824 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1119.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11034 bytes_read=137155 bytes_retransmit=9 bytes_invalid=0 send_seq=1457 receive_seq=1457 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008237 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=7527 bytes_read=25165 bytes_retransmit=0 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999030 adj=49997866 sd_pos=22300 heater_bed: target=60 temp=55.8 pwm=0.645 sysload=0.05 cputime=18.141 memavail=3314032 print_time=1124.824 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1120.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11072 bytes_read=137286 bytes_retransmit=9 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008234 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7533 bytes_read=25194 bytes_retransmit=0 bytes_invalid=0 send_seq=1231 receive_seq=1231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49997969 sd_pos=22300 heater_bed: target=60 temp=56.0 pwm=0.841 sysload=0.05 cputime=18.162 memavail=3314032 print_time=1125.825 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1121.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11110 bytes_read=137414 bytes_retransmit=9 bytes_invalid=0 send_seq=1463 receive_seq=1463 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008246 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7539 bytes_read=25210 bytes_retransmit=0 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999039 adj=49998082 sd_pos=22300 heater_bed: target=60 temp=56.2 pwm=0.677 sysload=0.04 cputime=18.182 memavail=3314032 print_time=1126.825 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1122.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11148 bytes_read=137542 bytes_retransmit=9 bytes_invalid=0 send_seq=1466 receive_seq=1466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008242 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7545 bytes_read=25226 bytes_retransmit=0 bytes_invalid=0 send_seq=1233 receive_seq=1233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999042 adj=49998087 sd_pos=22300 heater_bed: target=60 temp=56.4 pwm=0.630 sysload=0.04 cputime=18.202 memavail=3313780 print_time=1127.826 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1123.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11202 bytes_read=137678 bytes_retransmit=9 bytes_invalid=0 send_seq=1470 receive_seq=1470 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008235 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7551 bytes_read=25242 bytes_retransmit=0 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49998114 sd_pos=22300 heater_bed: target=60 temp=56.6 pwm=0.570 sysload=0.04 cputime=18.222 memavail=3313780 print_time=1128.827 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1124.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11240 bytes_read=137794 bytes_retransmit=9 bytes_invalid=0 send_seq=1473 receive_seq=1473 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008226 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7557 bytes_read=25258 bytes_retransmit=0 bytes_invalid=0 send_seq=1235 receive_seq=1235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998116 sd_pos=22300 heater_bed: target=60 temp=56.7 pwm=0.545 sysload=0.04 cputime=18.241 memavail=3313780 print_time=1129.827 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1125.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11294 bytes_read=137930 bytes_retransmit=9 bytes_invalid=0 send_seq=1477 receive_seq=1477 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=400008225 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7563 bytes_read=25286 bytes_retransmit=0 bytes_invalid=0 send_seq=1236 receive_seq=1236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49998130 sd_pos=22300 heater_bed: target=60 temp=56.9 pwm=0.575 sysload=0.04 cputime=18.262 memavail=3313780 print_time=1130.828 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1126.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11359 bytes_read=138080 bytes_retransmit=9 bytes_invalid=0 send_seq=1481 receive_seq=1481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008215 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7569 bytes_read=25301 bytes_retransmit=0 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999047 adj=49998127 sd_pos=22300 heater_bed: target=60 temp=57.1 pwm=0.532 sysload=0.12 cputime=18.282 memavail=3313780 print_time=1131.828 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1127.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11365 bytes_read=138186 bytes_retransmit=9 bytes_invalid=0 send_seq=1482 receive_seq=1482 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008206 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7575 bytes_read=25316 bytes_retransmit=0 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999050 adj=49998138 sd_pos=22300 heater_bed: target=60 temp=57.2 pwm=0.532 sysload=0.12 cputime=18.299 memavail=3313536 print_time=1132.829 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1128.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11387 bytes_read=138312 bytes_retransmit=9 bytes_invalid=0 send_seq=1484 receive_seq=1484 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008202 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7581 bytes_read=25331 bytes_retransmit=0 bytes_invalid=0 send_seq=1239 receive_seq=1239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999049 adj=49998180 sd_pos=22300 heater_bed: target=60 temp=57.4 pwm=0.637 sysload=0.12 cputime=18.318 memavail=3313536 print_time=1133.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1129.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11425 bytes_read=138443 bytes_retransmit=9 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7587 bytes_read=25346 bytes_retransmit=0 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999046 adj=49998126 sd_pos=22300 heater_bed: target=60 temp=57.5 pwm=0.596 sysload=0.12 cputime=18.337 memavail=3313536 print_time=1134.831 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1130.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11463 bytes_read=138559 bytes_retransmit=9 bytes_invalid=0 send_seq=1490 receive_seq=1490 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7593 bytes_read=25374 bytes_retransmit=0 bytes_invalid=0 send_seq=1241 receive_seq=1241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998066 sd_pos=22300 heater_bed: target=60 temp=57.6 pwm=0.535 sysload=0.12 cputime=18.355 memavail=3313536 print_time=1135.831 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1131.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11501 bytes_read=138704 bytes_retransmit=9 bytes_invalid=0 send_seq=1493 receive_seq=1493 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008199 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7599 bytes_read=25390 bytes_retransmit=0 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49998033 sd_pos=22300 heater_bed: target=60 temp=57.8 pwm=0.535 sysload=0.19 cputime=18.375 memavail=3313536 print_time=1136.833 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1132.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11539 bytes_read=138830 bytes_retransmit=9 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008201 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7605 bytes_read=25406 bytes_retransmit=0 bytes_invalid=0 send_seq=1243 receive_seq=1243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999043 adj=49998013 sd_pos=22300 heater_bed: target=60 temp=58.0 pwm=0.564 sysload=0.19 cputime=18.395 memavail=3313536 print_time=1137.833 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 1133.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11572 bytes_read=138940 bytes_retransmit=9 bytes_invalid=0 send_seq=1498 receive_seq=1498 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008196 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7611 bytes_read=25422 bytes_retransmit=0 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999046 adj=49998008 sd_pos=22300 heater_bed: target=60 temp=58.1 pwm=0.541 sysload=0.19 cputime=18.414 memavail=3313536 print_time=1138.834 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1134.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11594 bytes_read=139066 bytes_retransmit=9 bytes_invalid=0 send_seq=1500 receive_seq=1500 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008203 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7617 bytes_read=25438 bytes_retransmit=0 bytes_invalid=0 send_seq=1245 receive_seq=1245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999047 adj=49998055 sd_pos=22300 heater_bed: target=60 temp=58.2 pwm=0.481 sysload=0.19 cputime=18.435 memavail=3313536 print_time=1139.835 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1135.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11616 bytes_read=139192 bytes_retransmit=9 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008204 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7623 bytes_read=25467 bytes_retransmit=0 bytes_invalid=0 send_seq=1246 receive_seq=1246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999046 adj=49998058 sd_pos=22300 heater_bed: target=60 temp=58.3 pwm=0.534 sysload=0.19 cputime=18.454 memavail=3313032 print_time=1140.836 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1136.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11638 bytes_read=139317 bytes_retransmit=9 bytes_invalid=0 send_seq=1504 receive_seq=1504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008220 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7629 bytes_read=25483 bytes_retransmit=0 bytes_invalid=0 send_seq=1247 receive_seq=1247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999045 adj=49998020 sd_pos=22300 heater_bed: target=60 temp=58.5 pwm=0.452 sysload=0.34 cputime=18.473 memavail=3313032 print_time=1141.836 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1137.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11676 bytes_read=139448 bytes_retransmit=9 bytes_invalid=0 send_seq=1507 receive_seq=1507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008214 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7635 bytes_read=25499 bytes_retransmit=0 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999044 adj=49997978 sd_pos=22300 heater_bed: target=60 temp=58.6 pwm=0.597 sysload=0.34 cputime=18.493 memavail=3312808 print_time=1142.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1138.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11714 bytes_read=139579 bytes_retransmit=9 bytes_invalid=0 send_seq=1510 receive_seq=1510 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008209 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7641 bytes_read=25515 bytes_retransmit=0 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999042 adj=49997989 sd_pos=22300 heater_bed: target=60 temp=58.7 pwm=0.526 sysload=0.34 cputime=18.512 memavail=3312808 print_time=1143.837 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1139.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11752 bytes_read=139695 bytes_retransmit=9 bytes_invalid=0 send_seq=1513 receive_seq=1513 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008203 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=7647 bytes_read=25531 bytes_retransmit=0 bytes_invalid=0 send_seq=1250 receive_seq=1250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999039 adj=49997967 sd_pos=22300 heater_bed: target=60 temp=58.8 pwm=0.353 sysload=0.34 cputime=18.530 memavail=3312808 print_time=1144.838 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1140.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11790 bytes_read=139826 bytes_retransmit=9 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7653 bytes_read=25560 bytes_retransmit=0 bytes_invalid=0 send_seq=1251 receive_seq=1251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49997952 sd_pos=22300 heater_bed: target=60 temp=58.9 pwm=0.532 sysload=0.34 cputime=18.552 memavail=3312808 print_time=1145.839 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1141.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11844 bytes_read=139976 bytes_retransmit=9 bytes_invalid=0 send_seq=1520 receive_seq=1520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008191 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7659 bytes_read=25576 bytes_retransmit=0 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49997935 sd_pos=22300 heater_bed: target=60 temp=59.0 pwm=0.566 sysload=0.31 cputime=18.573 memavail=3312556 print_time=1146.840 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1142.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11898 bytes_read=140097 bytes_retransmit=9 bytes_invalid=0 send_seq=1524 receive_seq=1524 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008217 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7665 bytes_read=25592 bytes_retransmit=0 bytes_invalid=0 send_seq=1253 receive_seq=1253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999033 adj=49997960 sd_pos=22300 heater_bed: target=60 temp=59.1 pwm=0.471 sysload=0.31 cputime=18.593 memavail=3312556 print_time=1147.841 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1143.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=11937 bytes_read=140233 bytes_retransmit=9 bytes_invalid=0 send_seq=1527 receive_seq=1527 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008212 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7671 bytes_read=25608 bytes_retransmit=0 bytes_invalid=0 send_seq=1254 receive_seq=1254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999031 adj=49997880 sd_pos=22300 heater_bed: target=60 temp=59.2 pwm=0.508 sysload=0.31 cputime=18.613 memavail=3312556 print_time=1148.842 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000000
Stats 1144.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13524 bytes_read=141355 bytes_retransmit=9 bytes_invalid=0 send_seq=1603 receive_seq=1603 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008194 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7677 bytes_read=25624 bytes_retransmit=0 bytes_invalid=0 send_seq=1255 receive_seq=1255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49997892 sd_pos=22300 heater_bed: target=60 temp=59.3 pwm=0.366 sysload=0.31 cputime=18.692 memavail=3312556 print_time=1150.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1145.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14169 bytes_read=141838 bytes_retransmit=9 bytes_invalid=0 send_seq=1641 receive_seq=1641 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7683 bytes_read=25653 bytes_retransmit=0 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49997974 sd_pos=22300 heater_bed: target=60 temp=59.4 pwm=0.366 sysload=0.31 cputime=18.736 memavail=3312560 print_time=1151.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1146.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=14836 bytes_read=142351 bytes_retransmit=9 bytes_invalid=0 send_seq=1679 receive_seq=1679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7689 bytes_read=25669 bytes_retransmit=0 bytes_invalid=0 send_seq=1257 receive_seq=1257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49998013 sd_pos=22300 heater_bed: target=60 temp=59.5 pwm=0.442 sysload=0.28 cputime=18.783 memavail=3312560 print_time=1152.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1147.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=15497 bytes_read=142854 bytes_retransmit=9 bytes_invalid=0 send_seq=1718 receive_seq=1718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008174 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7695 bytes_read=25685 bytes_retransmit=0 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999034 adj=49998040 sd_pos=22300 heater_bed: target=60 temp=59.6 pwm=0.332 sysload=0.28 cputime=18.831 memavail=3312812 print_time=1153.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1148.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=16158 bytes_read=143342 bytes_retransmit=9 bytes_invalid=0 send_seq=1757 receive_seq=1757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7701 bytes_read=25701 bytes_retransmit=0 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49998042 sd_pos=22300 heater_bed: target=60 temp=59.7 pwm=0.386 sysload=0.28 cputime=18.875 memavail=3312812 print_time=1154.601 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1149.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=17004 bytes_read=143903 bytes_retransmit=9 bytes_invalid=0 send_seq=1800 receive_seq=1800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008186 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=7707 bytes_read=25717 bytes_retransmit=0 bytes_invalid=0 send_seq=1260 receive_seq=1260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999033 adj=49998071 sd_pos=22300 heater_bed: target=60 temp=59.8 pwm=0.304 sysload=0.28 cputime=18.931 memavail=3312812 print_time=1155.590 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 1150.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=18534 bytes_read=145096 bytes_retransmit=9 bytes_invalid=0 send_seq=1899 receive_seq=1899 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008167 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7713 bytes_read=25746 bytes_retransmit=0 bytes_invalid=0 send_seq=1261 receive_seq=1261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999032 adj=49997991 sd_pos=22300 heater_bed: target=60 temp=59.8 pwm=0.471 sysload=0.28 cputime=19.016 memavail=3312816 print_time=1156.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1151.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=19087 bytes_read=145645 bytes_retransmit=9 bytes_invalid=0 send_seq=1942 receive_seq=1942 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008150 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7719 bytes_read=25762 bytes_retransmit=0 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999030 adj=49998005 sd_pos=22300 heater_bed: target=60 temp=59.9 pwm=0.405 sysload=0.26 cputime=19.061 memavail=3312816 print_time=1157.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1152.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=19651 bytes_read=146194 bytes_retransmit=9 bytes_invalid=0 send_seq=1985 receive_seq=1985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008140 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7725 bytes_read=25778 bytes_retransmit=0 bytes_invalid=0 send_seq=1263 receive_seq=1263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999028 adj=49998009 sd_pos=22300 heater_bed: target=60 temp=60.0 pwm=0.393 sysload=0.26 cputime=19.108 memavail=3312816 print_time=1158.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1153.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=20202 bytes_read=146741 bytes_retransmit=9 bytes_invalid=0 send_seq=2028 receive_seq=2028 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008129 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7731 bytes_read=25794 bytes_retransmit=0 bytes_invalid=0 send_seq=1264 receive_seq=1264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49998004 sd_pos=22300 heater_bed: target=60 temp=60.0 pwm=0.339 sysload=0.26 cputime=19.155 memavail=3312816 print_time=1159.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1154.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=20756 bytes_read=147261 bytes_retransmit=9 bytes_invalid=0 send_seq=2070 receive_seq=2070 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008116 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=7737 bytes_read=25810 bytes_retransmit=0 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999024 adj=49998011 sd_pos=22300 heater_bed: target=60 temp=60.1 pwm=0.350 sysload=0.26 cputime=19.202 memavail=3312816 print_time=1160.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1155.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=21293 bytes_read=147805 bytes_retransmit=9 bytes_invalid=0 send_seq=2112 receive_seq=2112 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008110 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7743 bytes_read=25839 bytes_retransmit=0 bytes_invalid=0 send_seq=1266 receive_seq=1266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999021 adj=49997986 sd_pos=22300 heater_bed: target=60 temp=60.2 pwm=0.350 sysload=0.26 cputime=19.247 memavail=3312816 print_time=1161.574 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1156.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=22546 bytes_read=148359 bytes_retransmit=9 bytes_invalid=0 send_seq=2156 receive_seq=2156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008105 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7749 bytes_read=25855 bytes_retransmit=0 bytes_invalid=0 send_seq=1267 receive_seq=1267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999016 adj=49997959 sd_pos=22300 heater_bed: target=60 temp=60.3 pwm=0.233 sysload=0.24 cputime=19.318 memavail=3312316 print_time=1162.498 buffer_time=0.103 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1157.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=22941 bytes_read=148785 bytes_retransmit=9 bytes_invalid=0 send_seq=2184 receive_seq=2184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008096 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7755 bytes_read=25871 bytes_retransmit=0 bytes_invalid=0 send_seq=1268 receive_seq=1268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999013 adj=49997878 sd_pos=22300 heater_bed: target=60 temp=60.3 pwm=0.466 sysload=0.24 cputime=19.338 memavail=3311560 print_time=1164.428 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1158.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=23346 bytes_read=149079 bytes_retransmit=9 bytes_invalid=0 send_seq=2204 receive_seq=2204 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008088 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7761 bytes_read=25887 bytes_retransmit=0 bytes_invalid=0 send_seq=1269 receive_seq=1269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999010 adj=49997905 sd_pos=22300 heater_bed: target=60 temp=60.3 pwm=0.298 sysload=0.24 cputime=19.353 memavail=3311560 print_time=1164.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1159.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=24058 bytes_read=149623 bytes_retransmit=9 bytes_invalid=0 send_seq=2246 receive_seq=2246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008082 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=7767 bytes_read=25903 bytes_retransmit=0 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999007 adj=49997871 sd_pos=22300 heater_bed: target=60 temp=60.4 pwm=0.283 sysload=0.24 cputime=19.379 memavail=3311560 print_time=1165.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1160.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=24771 bytes_read=150157 bytes_retransmit=9 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008111 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7773 bytes_read=25932 bytes_retransmit=0 bytes_invalid=0 send_seq=1271 receive_seq=1271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999007 adj=49997881 sd_pos=22300 heater_bed: target=60 temp=60.4 pwm=0.353 sysload=0.24 cputime=19.406 memavail=3311560 print_time=1166.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1161.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=25495 bytes_read=150721 bytes_retransmit=9 bytes_invalid=0 send_seq=2332 receive_seq=2332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008105 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7779 bytes_read=25948 bytes_retransmit=0 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999005 adj=49997852 sd_pos=22300 heater_bed: target=60 temp=60.5 pwm=0.200 sysload=0.22 cputime=19.451 memavail=3311564 print_time=1167.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 1162.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=26208 bytes_read=151270 bytes_retransmit=9 bytes_invalid=0 send_seq=2375 receive_seq=2375 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008096 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7785 bytes_read=25964 bytes_retransmit=0 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999005 adj=49997856 sd_pos=22300 heater_bed: target=60 temp=60.5 pwm=0.307 sysload=0.22 cputime=19.499 memavail=3311564 print_time=1168.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1163.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=26910 bytes_read=151804 bytes_retransmit=9 bytes_invalid=0 send_seq=2418 receive_seq=2418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008087 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7791 bytes_read=25980 bytes_retransmit=0 bytes_invalid=0 send_seq=1274 receive_seq=1274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999006 adj=49997919 sd_pos=22300 heater_bed: target=60 temp=60.6 pwm=0.307 sysload=0.22 cputime=19.550 memavail=3311564 print_time=1169.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1164.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=27630 bytes_read=152348 bytes_retransmit=9 bytes_invalid=0 send_seq=2461 receive_seq=2461 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008082 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7797 bytes_read=25996 bytes_retransmit=0 bytes_invalid=0 send_seq=1275 receive_seq=1275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999004 adj=49997960 sd_pos=22300 heater_bed: target=60 temp=60.6 pwm=0.305 sysload=0.22 cputime=19.602 memavail=3311564 print_time=1170.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1165.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=28329 bytes_read=152891 bytes_retransmit=9 bytes_invalid=0 send_seq=2504 receive_seq=2504 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008071 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=7803 bytes_read=26012 bytes_retransmit=0 bytes_invalid=0 send_seq=1276 receive_seq=1276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999004 adj=49997956 sd_pos=22300 heater_bed: target=60 temp=60.7 pwm=0.305 sysload=0.22 cputime=19.652 memavail=3311564 print_time=1171.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1166.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=29053 bytes_read=153440 bytes_retransmit=9 bytes_invalid=0 send_seq=2547 receive_seq=2547 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008063 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7809 bytes_read=26041 bytes_retransmit=0 bytes_invalid=0 send_seq=1277 receive_seq=1277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999004 adj=49997980 sd_pos=22300 heater_bed: target=60 temp=60.7 pwm=0.339 sysload=0.20 cputime=19.704 memavail=3311564 print_time=1172.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1167.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=29799 bytes_read=153989 bytes_retransmit=9 bytes_invalid=0 send_seq=2590 receive_seq=2590 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008055 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7815 bytes_read=26057 bytes_retransmit=0 bytes_invalid=0 send_seq=1278 receive_seq=1278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999004 adj=49998001 sd_pos=22300 heater_bed: target=60 temp=60.7 pwm=0.415 sysload=0.20 cputime=19.754 memavail=3311068 print_time=1173.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1168.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=30512 bytes_read=154538 bytes_retransmit=9 bytes_invalid=0 send_seq=2633 receive_seq=2633 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008040 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7821 bytes_read=26073 bytes_retransmit=0 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999001 adj=49998018 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.287 sysload=0.20 cputime=19.780 memavail=3311068 print_time=1174.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 1169.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=31236 bytes_read=155072 bytes_retransmit=9 bytes_invalid=0 send_seq=2676 receive_seq=2676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008027 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7827 bytes_read=26089 bytes_retransmit=0 bytes_invalid=0 send_seq=1280 receive_seq=1280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998998 adj=49997883 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.234 sysload=0.20 cputime=19.806 memavail=3311068 print_time=1175.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1170.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=31982 bytes_read=155621 bytes_retransmit=9 bytes_invalid=0 send_seq=2719 receive_seq=2719 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008013 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=7833 bytes_read=26105 bytes_retransmit=0 bytes_invalid=0 send_seq=1281 receive_seq=1281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998996 adj=49997895 sd_pos=22300 heater_bed: target=60 temp=60.9 pwm=0.282 sysload=0.20 cputime=19.836 memavail=3310060 print_time=1176.578 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 548463300960
Received 956.153433: b'{"id": 548289176000, "method": "gcode/help", "params": {}}'
Received 957.028380: b'{"id": 548311704048, "method": "info", "params": {}}'
Received 957.029143: b'{"id": 548285529632, "method": "objects/list", "params": {}}'
Received 957.029618: b'{"id": 548285528384, "method": "gcode/help", "params": {}}'
Received 957.050760: b'{"id": 548285529728, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 969.689276: b'{"id": 548285528288, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 999.724269: b'{"id": 548311704384, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1004.688611: b'{"id": 548286367440, "method": "info", "params": {}}'
Received 1004.688611: b'{"id": 548286369264, "method": "objects/list", "params": {}}'
Received 1004.689428: b'{"id": 548286369024, "method": "gcode/help", "params": {}}'
Received 1004.708825: b'{"id": 548286368592, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 1019.128536: b'{"id": 548286368688, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\\"wall-honeycomb-part_PLA_2h13m.gcode\\""}}'
Received 1019.329413: b'{"id": 548285527856, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1019.334752: b'{"id": 548286366000, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1049.779210: b'{"id": 548286368784, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1079.813015: b'{"id": 548286368016, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1109.846526: b'{"id": 548286368064, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1139.883579: b'{"id": 548286368784, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1169.913467: b'{"id": 548286368640, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 1170.168229: b'{"id": 548286368784, "method": "emergency_stop", "params": {}}'
Virtual sdcard (21276): 'MuMrbMI7aMMZ1cdNFFu8cMusjp60QObYguHc961rOajhMzxp\n; j7UepELhKwrL0yxjwg5PMRawJWrJFdfPHFy2M3TxtjzCSe/OQnHywFLO8BNMY8KKEgf8011xzyHkBj\n; jDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxh\n; hjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wx\n; xhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcYYY4\n; wxxhhjjDHGGGOMMcYYY4wxxhhjjDHGGGOMMcbU8f8A6J99WhNcOpkAAAAASUVORK5CYII=\n; thumbnail end\n; THUMBNAIL_BLOCK_END\n\n; external perimeters extrusion width = 0.40mm\n; perimeters extrusion width = 0.45mm\n; infill extrusion width = 0.45mm\n; solid infill extrusion width = 0.40mm\n; top infill extrusion width = 0.40mm\n; first layer extrusion width = 0.50mm\n\n; EXECUTABLE_BLOCK_START\nEXCLUDE_OBJECT_DEFINE NAME=wall-honeycomb-part.stl_id_0_copy_0 CENTER=117.5,117.5 POLYGON=[[29,59.5924],[40.8,39.1542],[52.6,32.3414],[194.2,32.3414],[206,39.1542],[206,175.408],[194.2,195.846],[182.4,202.659],[40.8,202.659],[29,195.846],[29,59.5924]]\nM73 P0 R132\n;TYPE:Custom\n'
Upcoming (22300): 'PRINT_START EXTRUDER_TEMP=210 BED_TEMP=60\nG90\nG21\nM83 ; use relative distances for extrusion\n; filament start gcode\nSET_PRESSURE'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (1019.568037707, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=58053975710 clock_est=(1141.545 56626306617 49998995.176) min_half_rtt=0.000055 min_rtt_time=1168.130 time_avg=1141.545(843.506) clock_avg=56626306617.209(42174437108.709) pred_variance=4165694.889 clock_adj=(15.322 49997879.750)
Dumping serial stats: bytes_write=7845 bytes_read=26133 bytes_retransmit=0 bytes_invalid=0 send_seq=1283 receive_seq=1283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 1073.604447 1073.604447 6: seq: 1f, get_clock
Sent 1 1074.588856 1074.588856 6: seq: 10, get_clock
Sent 2 1075.573600 1075.573600 6: seq: 11, get_clock
Sent 3 1076.557743 1076.557743 6: seq: 12, get_clock
Sent 4 1077.542626 1077.542626 6: seq: 13, get_clock
Sent 5 1078.527395 1078.527395 6: seq: 14, get_clock
Sent 6 1079.512450 1079.512450 6: seq: 15, get_clock
Sent 7 1080.496323 1080.496323 6: seq: 16, get_clock
Sent 8 1081.480453 1081.480453 6: seq: 17, get_clock
Sent 9 1082.464827 1082.464827 6: seq: 18, get_clock
Sent 10 1083.449767 1083.449767 6: seq: 19, get_clock
Sent 11 1084.434164 1084.434164 6: seq: 1a, get_clock
Sent 12 1085.418983 1085.418983 6: seq: 1b, get_clock
Sent 13 1086.403507 1086.403507 6: seq: 1c, get_clock
Sent 14 1087.388608 1087.388608 6: seq: 1d, get_clock
Sent 15 1088.373517 1088.373517 6: seq: 1e, get_clock
Sent 16 1089.358527 1089.358527 6: seq: 1f, get_clock
Sent 17 1090.342766 1090.342766 6: seq: 10, get_clock
Sent 18 1091.327464 1091.327464 6: seq: 11, get_clock
Sent 19 1092.312090 1092.312090 6: seq: 12, get_clock
Sent 20 1093.296415 1093.296415 6: seq: 13, get_clock
Sent 21 1094.280563 1094.280563 6: seq: 14, get_clock
Sent 22 1095.265675 1095.265675 6: seq: 15, get_clock
Sent 23 1096.250453 1096.250453 6: seq: 16, get_clock
Sent 24 1097.234531 1097.234531 6: seq: 17, get_clock
Sent 25 1098.218759 1098.218759 6: seq: 18, get_clock
Sent 26 1099.203920 1099.203920 6: seq: 19, get_clock
Sent 27 1100.187940 1100.187940 6: seq: 1a, get_clock
Sent 28 1101.172962 1101.172962 6: seq: 1b, get_clock
Sent 29 1102.157727 1102.157727 6: seq: 1c, get_clock
Sent 30 1103.142200 1103.142200 6: seq: 1d, get_clock
Sent 31 1104.126524 1104.126524 6: seq: 1e, get_clock
Sent 32 1105.111417 1105.111417 6: seq: 1f, get_clock
Sent 33 1106.095595 1106.095595 6: seq: 10, get_clock
Sent 34 1107.079766 1107.079766 6: seq: 11, get_clock
Sent 35 1108.064719 1108.064719 6: seq: 12, get_clock
Sent 36 1109.049709 1109.049709 6: seq: 13, get_clock
Sent 37 1110.034655 1110.034655 6: seq: 14, get_clock
Sent 38 1111.019101 1111.019101 6: seq: 15, get_clock
Sent 39 1112.003686 1112.003686 6: seq: 16, get_clock
Sent 40 1112.987908 1112.987908 6: seq: 17, get_clock
Sent 41 1113.972150 1113.972150 6: seq: 18, get_clock
Sent 42 1114.956885 1114.956885 6: seq: 19, get_clock
Sent 43 1115.941506 1115.941506 6: seq: 1a, get_clock
Sent 44 1116.925713 1116.925713 6: seq: 1b, get_clock
Sent 45 1117.910769 1117.910769 6: seq: 1c, get_clock
Sent 46 1118.895851 1118.895851 6: seq: 1d, get_clock
Sent 47 1119.880916 1119.880916 6: seq: 1e, get_clock
Sent 48 1120.866031 1120.866031 6: seq: 1f, get_clock
Sent 49 1121.851247 1121.851247 6: seq: 10, get_clock
Sent 50 1122.836330 1122.836330 6: seq: 11, get_clock
Sent 51 1123.821522 1123.821522 6: seq: 12, get_clock
Sent 52 1124.805854 1124.805854 6: seq: 13, get_clock
Sent 53 1125.790750 1125.790750 6: seq: 14, get_clock
Sent 54 1126.775661 1126.775661 6: seq: 15, get_clock
Sent 55 1127.760418 1127.760418 6: seq: 16, get_clock
Sent 56 1128.744879 1128.744879 6: seq: 17, get_clock
Sent 57 1129.729725 1129.729725 6: seq: 18, get_clock
Sent 58 1130.714281 1130.714281 6: seq: 19, get_clock
Sent 59 1131.699409 1131.699409 6: seq: 1a, get_clock
Sent 60 1132.684194 1132.684194 6: seq: 1b, get_clock
Sent 61 1133.668253 1133.668253 6: seq: 1c, get_clock
Sent 62 1134.653231 1134.653231 6: seq: 1d, get_clock
Sent 63 1135.637730 1135.637730 6: seq: 1e, get_clock
Sent 64 1136.622233 1136.622233 6: seq: 1f, get_clock
Sent 65 1137.606299 1137.606299 6: seq: 10, get_clock
Sent 66 1138.590474 1138.590474 6: seq: 11, get_clock
Sent 67 1139.575381 1139.575381 6: seq: 12, get_clock
Sent 68 1140.560286 1140.560286 6: seq: 13, get_clock
Sent 69 1141.545184 1141.545184 6: seq: 14, get_clock
Sent 70 1142.529754 1142.529754 6: seq: 15, get_clock
Sent 71 1143.514687 1143.514687 6: seq: 16, get_clock
Sent 72 1144.499270 1144.499270 6: seq: 17, get_clock
Sent 73 1145.483891 1145.483891 6: seq: 18, get_clock
Sent 74 1146.468611 1146.468611 6: seq: 19, get_clock
Sent 75 1147.453535 1147.453535 6: seq: 1a, get_clock
Sent 76 1148.437805 1148.437805 6: seq: 1b, get_clock
Sent 77 1149.422323 1149.422323 6: seq: 1c, get_clock
Sent 78 1150.406617 1150.406617 6: seq: 1d, get_clock
Sent 79 1151.391478 1151.391478 6: seq: 1e, get_clock
Sent 80 1152.376278 1152.376278 6: seq: 1f, get_clock
Sent 81 1153.360579 1153.360579 6: seq: 10, get_clock
Sent 82 1154.345244 1154.345244 6: seq: 11, get_clock
Sent 83 1155.330096 1155.330096 6: seq: 12, get_clock
Sent 84 1156.314728 1156.314728 6: seq: 13, get_clock
Sent 85 1157.299301 1157.299301 6: seq: 14, get_clock
Sent 86 1158.284373 1158.284373 6: seq: 15, get_clock
Sent 87 1159.268406 1159.268406 6: seq: 16, get_clock
Sent 88 1160.253238 1160.253238 6: seq: 17, get_clock
Sent 89 1161.237587 1161.237587 6: seq: 18, get_clock
Sent 90 1162.222254 1162.222254 6: seq: 19, get_clock
Sent 91 1163.207290 1163.207290 6: seq: 1a, get_clock
Sent 92 1164.192084 1164.192084 6: seq: 1b, get_clock
Sent 93 1165.176480 1165.176480 6: seq: 1c, get_clock
Sent 94 1166.160944 1166.160944 6: seq: 1d, get_clock
Sent 95 1167.145628 1167.145628 6: seq: 1e, get_clock
Sent 96 1168.130304 1168.130304 6: seq: 1f, get_clock
Sent 97 1169.114484 1169.114484 6: seq: 10, get_clock
Sent 98 1170.098705 1170.098705 6: seq: 11, get_clock
Sent 99 1170.170722 1170.170722 6: seq: 12, emergency_stop
Dumping receive queue 100 messages
Receive: 0 1089.318019 1088.373517 13: seq: 1f, stats count=55 sum=24517 sumsq=177205
Receive: 1 1089.358758 1089.358527 11: seq: 10, clock clock=2477438037
Receive: 2 1090.343001 1090.342766 11: seq: 11, clock clock=2526649197
Receive: 3 1091.327774 1091.327464 11: seq: 12, clock clock=2575884932
Receive: 4 1092.312571 1092.312090 11: seq: 13, clock clock=2625121915
Receive: 5 1093.296787 1093.296415 11: seq: 14, clock clock=2674335970
Receive: 6 1094.280832 1094.280563 11: seq: 15, clock clock=2723537959
Receive: 7 1094.318083 1094.280563 13: seq: 15, stats count=56 sum=33909 sumsq=440659
Receive: 8 1095.266025 1095.265675 11: seq: 16, clock clock=2772795702
Receive: 9 1096.250741 1096.250453 11: seq: 17, clock clock=2822030370
Receive: 10 1097.234772 1097.234531 11: seq: 18, clock clock=2871231970
Receive: 11 1098.219033 1098.218759 11: seq: 19, clock clock=2920443424
Receive: 12 1099.204248 1099.203920 11: seq: 1a, clock clock=2969701299
Receive: 13 1099.318241 1099.203920 13: seq: 1a, stats count=55 sum=32559 sumsq=429298
Receive: 14 1100.188135 1100.187940 11: seq: 1b, clock clock=3018898404
Receive: 15 1101.173191 1101.172962 11: seq: 1c, clock clock=3068149748
Receive: 16 1102.157951 1102.157727 11: seq: 1d, clock clock=3117386843
Receive: 17 1103.142547 1103.142200 11: seq: 1e, clock clock=3166611526
Receive: 18 1104.126766 1104.126524 11: seq: 1f, clock clock=3215824710
Receive: 19 1104.318447 1104.126524 13: seq: 1f, stats count=55 sum=26833 sumsq=223521
Receive: 20 1105.111781 1105.111417 11: seq: 10, clock clock=3265071250
Receive: 21 1106.095912 1106.095595 11: seq: 11, clock clock=3314279527
Receive: 22 1107.080087 1107.079766 11: seq: 12, clock clock=3363487186
Receive: 23 1108.065048 1108.064719 11: seq: 13, clock clock=3412733278
Receive: 24 1109.050014 1109.049709 11: seq: 14, clock clock=3461981711
Receive: 25 1109.418388 1109.049709 13: seq: 14, stats count=56 sum=30594 sumsq=325310
Receive: 26 1110.035003 1110.034655 11: seq: 15, clock clock=3511230758
Receive: 27 1111.019317 1111.019101 11: seq: 16, clock clock=3560446263
Receive: 28 1112.003894 1112.003686 11: seq: 17, clock clock=3609674429
Receive: 29 1112.988152 1112.987908 11: seq: 18, clock clock=3658885676
Receive: 30 1113.972375 1113.972150 11: seq: 19, clock clock=3708095960
Receive: 31 1114.518470 1113.972150 13: seq: 19, stats count=56 sum=26729 sumsq=216959
Receive: 32 1114.957100 1114.956885 11: seq: 1a, clock clock=3757331803
Receive: 33 1115.941720 1115.941506 11: seq: 1b, clock clock=3806561880
Receive: 34 1116.925931 1116.925713 11: seq: 1c, clock clock=3855771161
Receive: 35 1117.911002 1117.910769 11: seq: 1d, clock clock=3905024005
Receive: 36 1118.896150 1118.895851 11: seq: 1e, clock clock=3954280686
Receive: 37 1119.618723 1118.895851 13: seq: 1e, stats count=56 sum=26224 sumsq=212579
Receive: 38 1119.881300 1119.880916 11: seq: 1f, clock clock=4003535954
Receive: 39 1120.866394 1120.866031 11: seq: 10, clock clock=4052788231
Receive: 40 1121.851564 1121.851247 11: seq: 11, clock clock=4102047773
Receive: 41 1122.836605 1122.836330 11: seq: 12, clock clock=4151299596
Receive: 42 1123.821824 1123.821522 11: seq: 13, clock clock=4200558824
Receive: 43 1124.718716 1123.821522 13: seq: 13, stats count=56 sum=28607 sumsq=275900
Receive: 44 1124.806145 1124.805854 10: seq: 14, clock clock=4249774713
Receive: 45 1125.791039 1125.790750 10: seq: 15, clock clock=4051086
Receive: 46 1126.776100 1126.775661 10: seq: 16, clock clock=53297674
Receive: 47 1127.760660 1127.760418 10: seq: 17, clock clock=102530514
Receive: 48 1128.745092 1128.744879 10: seq: 18, clock clock=151751672
Receive: 49 1129.730011 1129.729725 10: seq: 19, clock clock=200993361
Receive: 50 1129.730035 1129.729725 13: seq: 19, stats count=56 sum=29143 sumsq=287907
Receive: 51 1130.714590 1130.714281 11: seq: 1a, clock clock=250221013
Receive: 52 1131.699703 1131.699409 11: seq: 1b, clock clock=299477093
Receive: 53 1132.684524 1132.684194 11: seq: 1c, clock clock=348717509
Receive: 54 1133.668574 1133.668253 11: seq: 1d, clock clock=397918985
Receive: 55 1134.653487 1134.653231 11: seq: 1e, clock clock=447164158
Receive: 56 1134.818853 1134.653231 13: seq: 1e, stats count=56 sum=28434 sumsq=284178
Receive: 57 1135.638004 1135.637730 11: seq: 1f, clock clock=496388917
Receive: 58 1136.622508 1136.622233 11: seq: 10, clock clock=545613177
Receive: 59 1137.606520 1137.606299 11: seq: 11, clock clock=594813786
Receive: 60 1138.590718 1138.590474 11: seq: 12, clock clock=644021473
Receive: 61 1139.575591 1139.575381 11: seq: 13, clock clock=693265827
Receive: 62 1139.919014 1139.575381 13: seq: 13, stats count=56 sum=25620 sumsq=203433
Receive: 63 1140.560539 1140.560286 11: seq: 14, clock clock=742511477
Receive: 64 1141.545387 1141.545184 11: seq: 15, clock clock=791753722
Receive: 65 1142.529968 1142.529754 11: seq: 16, clock clock=840981820
Receive: 66 1143.514947 1143.514687 11: seq: 17, clock clock=890229758
Receive: 67 1144.499511 1144.499270 11: seq: 18, clock clock=939457184
Receive: 68 1145.019035 1144.499270 13: seq: 18, stats count=56 sum=25598 sumsq=191608
Receive: 69 1145.484144 1145.483891 11: seq: 19, clock clock=988687366
Receive: 70 1146.468945 1146.468611 11: seq: 1a, clock clock=1037924173
Receive: 71 1147.453857 1147.453535 11: seq: 1b, clock clock=1087170195
Receive: 72 1148.438012 1148.437805 11: seq: 1c, clock clock=1136377740
Receive: 73 1149.422549 1149.422323 11: seq: 1d, clock clock=1185603669
Receive: 74 1150.019117 1149.422323 13: seq: 1d, stats count=55 sum=27349 sumsq=242519
Receive: 75 1150.406845 1150.406617 11: seq: 1e, clock clock=1234817119
Receive: 76 1151.391707 1151.391478 11: seq: 1f, clock clock=1284059413
Receive: 77 1152.376524 1152.376278 11: seq: 10, clock clock=1333298980
Receive: 78 1153.360757 1153.360579 11: seq: 11, clock clock=1382510999
Receive: 79 1154.345426 1154.345244 11: seq: 12, clock clock=1431743487
Receive: 80 1155.019232 1154.345244 13: seq: 12, stats count=55 sum=25235 sumsq=199340
Receive: 81 1155.330207 1155.330096 11: seq: 13, clock clock=1480983204
Receive: 82 1156.314860 1156.314728 11: seq: 14, clock clock=1530214892
Receive: 83 1157.299425 1157.299301 11: seq: 15, clock clock=1579442316
Receive: 84 1158.284513 1158.284373 11: seq: 16, clock clock=1628695780
Receive: 85 1159.268583 1159.268406 11: seq: 17, clock clock=1677898196
Receive: 86 1160.019301 1159.268406 13: seq: 17, stats count=55 sum=16054 sumsq=72145
Receive: 87 1160.253374 1160.253238 11: seq: 18, clock clock=1727136506
Receive: 88 1161.237829 1161.237587 11: seq: 19, clock clock=1776355886
Receive: 89 1162.222489 1162.222254 11: seq: 1a, clock clock=1825587834
Receive: 90 1163.207469 1163.207290 11: seq: 1b, clock clock=1874837180
Receive: 91 1164.192287 1164.192084 11: seq: 1c, clock clock=1924076716
Receive: 92 1165.119454 1164.192084 13: seq: 1c, stats count=56 sum=23501 sumsq=169486
Receive: 93 1165.176698 1165.176480 11: seq: 1d, clock clock=1973295859
Receive: 94 1166.161172 1166.160944 11: seq: 1e, clock clock=2022518318
Receive: 95 1167.145742 1167.145628 11: seq: 1f, clock clock=2071748600
Receive: 96 1168.130414 1168.130304 11: seq: 10, clock clock=2120981297
Receive: 97 1169.114611 1169.114484 11: seq: 11, clock clock=2170189873
Receive: 98 1170.098842 1170.098705 11: seq: 12, clock clock=2219400862
Receive: 99 1170.172338 1170.170722 12: seq: 13, shutdown clock=2223007308 static_string_id=Command request
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=470387345250 clock_est=(1141.062 458965559389 400008013.784) min_half_rtt=0.000061 min_rtt_time=1169.616 time_avg=1141.062(843.511) clock_avg=458965559389.175(337411308899.464) pred_variance=97246168.824
Dumping serial stats: bytes_write=32075 bytes_read=155701 bytes_retransmit=9 bytes_invalid=0 send_seq=2725 receive_seq=2725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 1167.895197 1167.895197 13: seq: 11, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 1 1167.895458 1167.895458 13: seq: 12, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 2 1167.895948 1167.895948 13: seq: 13, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 3 1167.895986 1167.895986 13: seq: 14, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 4 1167.911671 1167.911671 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 5 1167.960804 1167.960804 12: seq: 16, trsync_set_timeout oid=5 clock=1673250996
Sent 6 1167.961046 1167.961046 21: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 7 1168.011377 1168.011377 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 8 1168.060857 1168.060857 12: seq: 19, trsync_set_timeout oid=5 clock=1713250990
Sent 9 1168.061705 1168.061705 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 10 1168.111120 1168.111120 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 11 1168.160845 1168.160845 12: seq: 1c, trsync_set_timeout oid=5 clock=1753250990
Sent 12 1168.161812 1168.161812 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 13 1168.211133 1168.211133 32: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=1787764736 on_ticks=15871150
Sent 14 1168.260791 1168.260791 12: seq: 1f, trsync_set_timeout oid=5 clock=1793250994
Sent 15 1168.261454 1168.261454 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 16 1168.303349 1168.303349 13: seq: 11, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 17 1168.303435 1168.303435 13: seq: 12, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 18 1168.303927 1168.303927 13: seq: 13, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 19 1168.303995 1168.303995 13: seq: 14, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 20 1168.304560 1168.304560 13: seq: 15, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 21 1168.304622 1168.304622 13: seq: 16, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 22 1168.304827 1168.304827 13: seq: 17, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 23 1168.304963 1168.304963 13: seq: 18, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 24 1168.311927 1168.311927 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 25 1168.360818 1168.360818 12: seq: 1a, trsync_set_timeout oid=5 clock=1833250986
Sent 26 1168.361299 1168.361299 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 27 1168.411820 1168.411820 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 28 1168.460787 1168.460787 12: seq: 1d, trsync_set_timeout oid=5 clock=1873250998
Sent 29 1168.461140 1168.461140 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 30 1168.511505 1168.511505 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 31 1168.560857 1168.560857 12: seq: 10, trsync_set_timeout oid=5 clock=1913250990
Sent 32 1168.561408 1168.561408 21: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 33 1168.611836 1168.611836 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 34 1168.632013 1168.632013 6: seq: 13, get_clock
Sent 35 1168.660782 1168.660782 12: seq: 14, trsync_set_timeout oid=5 clock=1953250988
Sent 36 1168.661319 1168.661319 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 37 1168.711625 1168.711625 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 38 1168.760777 1168.760777 12: seq: 17, trsync_set_timeout oid=5 clock=1993251004
Sent 39 1168.760994 1168.760994 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 40 1168.811809 1168.811809 32: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=2027764736 on_ticks=9357515
Sent 41 1168.860798 1168.860798 12: seq: 1a, trsync_set_timeout oid=5 clock=2033250994
Sent 42 1168.861178 1168.861178 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 43 1168.895444 1168.895444 13: seq: 1c, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 44 1168.895548 1168.895548 13: seq: 1d, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 45 1168.896076 1168.896076 13: seq: 1e, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 46 1168.896114 1168.896114 13: seq: 1f, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 47 1168.911809 1168.911809 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 48 1168.960779 1168.960779 12: seq: 11, trsync_set_timeout oid=5 clock=2073250988
Sent 49 1168.961135 1168.961135 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 50 1169.011452 1169.011452 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 51 1169.060863 1169.060863 12: seq: 14, trsync_set_timeout oid=5 clock=2113250958
Sent 52 1169.061741 1169.061741 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 53 1169.111310 1169.111310 32: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=2147764736 on_ticks=4889438
Sent 54 1169.160800 1169.160800 12: seq: 17, trsync_set_timeout oid=5 clock=2153250994
Sent 55 1169.161028 1169.161028 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 56 1169.211370 1169.211370 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 57 1169.260772 1169.260772 12: seq: 1a, trsync_set_timeout oid=5 clock=2193250988
Sent 58 1169.261683 1169.261683 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 59 1169.304419 1169.304419 13: seq: 1c, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 60 1169.304480 1169.304480 13: seq: 1d, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 61 1169.304761 1169.304761 13: seq: 1e, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 62 1169.304981 1169.304981 13: seq: 1f, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 63 1169.305354 1169.305354 13: seq: 10, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 64 1169.305394 1169.305394 13: seq: 11, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 65 1169.305865 1169.305865 13: seq: 12, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 66 1169.306103 1169.306103 13: seq: 13, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 67 1169.311244 1169.311244 21: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 68 1169.360796 1169.360796 12: seq: 15, trsync_set_timeout oid=5 clock=2233251000
Sent 69 1169.361678 1169.361678 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 70 1169.411037 1169.411037 32: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=2267764736 on_ticks=9967163
Sent 71 1169.460847 1169.460847 12: seq: 18, trsync_set_timeout oid=5 clock=2273250990
Sent 72 1169.461421 1169.461421 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 73 1169.511848 1169.511848 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 74 1169.560862 1169.560862 12: seq: 1b, trsync_set_timeout oid=5 clock=2313250984
Sent 75 1169.561644 1169.561644 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 76 1169.611041 1169.611041 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 77 1169.616201 1169.616201 6: seq: 1e, get_clock
Sent 78 1169.660779 1169.660779 12: seq: 1f, trsync_set_timeout oid=5 clock=2353250998
Sent 79 1169.661522 1169.661522 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 80 1169.711994 1169.711994 32: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=2387764736 on_ticks=13529491
Sent 81 1169.760845 1169.760845 12: seq: 12, trsync_set_timeout oid=5 clock=2393250994
Sent 82 1169.761446 1169.761446 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 83 1169.811937 1169.811937 21: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 84 1169.860831 1169.860831 12: seq: 15, trsync_set_timeout oid=5 clock=2433250918
Sent 85 1169.861348 1169.861348 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 86 1169.895725 1169.895725 13: seq: 17, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 87 1169.895872 1169.895872 13: seq: 18, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 88 1169.896404 1169.896404 13: seq: 19, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 89 1169.896449 1169.896449 13: seq: 1a, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 90 1169.911549 1169.911549 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 91 1169.960847 1169.960847 12: seq: 1c, trsync_set_timeout oid=5 clock=2473251000
Sent 92 1169.961264 1169.961264 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 93 1170.011678 1170.011678 32: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, queue_digital_out oid=15 clock=2507764735 on_ticks=11268883
Sent 94 1170.060838 1170.060838 12: seq: 1f, trsync_set_timeout oid=5 clock=2513250998
Sent 95 1170.061438 1170.061438 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 96 1170.111464 1170.111464 21: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 97 1170.160821 1170.160821 12: seq: 12, trsync_set_timeout oid=5 clock=2553250920
Sent 98 1170.160948 1170.160948 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 99 1170.170898 1170.170898 6: seq: 14, emergency_stop
Dumping receive queue 100 messages
Receive: 0 1165.959824 1165.911323 14: seq: 10, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=773250984
Receive: 1 1166.059854 1166.011721 14: seq: 13, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=813250996
Receive: 2 1166.095271 1166.061670 15: seq: 15, analog_in_state oid=14 next_clock=944564736 value=27305
Receive: 3 1166.159835 1166.111364 14: seq: 16, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=853250924
Receive: 4 1166.175259 1166.161747 15: seq: 18, analog_in_state oid=22 next_clock=976564736 value=31358
Receive: 5 1166.259812 1166.211424 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=893250990
Receive: 6 1166.302808 1166.302575 13: seq: 1d, spi_transfer_response oid=0 response=b'\xf0\x00\x1f\x008'
Receive: 7 1166.303869 1166.303538 13: seq: 1f, spi_transfer_response oid=2 response=b'0\x00\x1f\x00\t'
Receive: 8 1166.305210 1166.304973 13: seq: 11, spi_transfer_response oid=0 response=b'\xf0\x00\x00\x00\x00'
Receive: 9 1166.306322 1166.306090 13: seq: 13, spi_transfer_response oid=2 response=b'p\x00\x00\x00\x00'
Receive: 10 1166.359830 1166.311951 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=933250990
Receive: 11 1166.395282 1166.361642 15: seq: 16, analog_in_state oid=14 next_clock=1064564736 value=27299
Receive: 12 1166.459816 1166.411333 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=973250922
Receive: 13 1166.475273 1166.461961 15: seq: 19, analog_in_state oid=22 next_clock=1096564736 value=31358
Receive: 14 1166.559867 1166.511869 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1013250990
Receive: 15 1166.659809 1166.612318 14: seq: 1d, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1053251004
Receive: 16 1166.663428 1166.663249 11: seq: 10, clock clock=1054713028
Receive: 17 1166.695245 1166.663249 15: seq: 10, analog_in_state oid=14 next_clock=1184564736 value=27302
Receive: 18 1166.759801 1166.711846 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1093251004
Receive: 19 1166.775462 1166.761602 15: seq: 13, analog_in_state oid=22 next_clock=1216564736 value=31358
Receive: 20 1166.859860 1166.812205 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1133250990
Receive: 21 1166.894806 1166.894587 13: seq: 18, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00H'
Receive: 22 1166.895350 1166.895207 13: seq: 1a, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 23 1166.959711 1166.911925 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1173250924
Receive: 24 1166.995157 1166.961254 15: seq: 1d, analog_in_state oid=14 next_clock=1304564736 value=27303
Receive: 25 1167.059761 1167.011706 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1213250990
Receive: 26 1167.075167 1167.061987 15: seq: 10, analog_in_state oid=22 next_clock=1336564736 value=31358
Receive: 27 1167.159722 1167.111434 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1253250990
Receive: 28 1167.259715 1167.211477 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1293250998
Receive: 29 1167.295335 1167.261787 15: seq: 16, analog_in_state oid=14 next_clock=1424564736 value=27298
Receive: 30 1167.302821 1167.302658 13: seq: 18, spi_transfer_response oid=0 response=b'\xb0\x00\x1f\x00J'
Receive: 31 1167.303344 1167.303203 13: seq: 1a, spi_transfer_response oid=2 response=b'0\x00\x1f\x00#'
Receive: 32 1167.304324 1167.304042 13: seq: 1c, spi_transfer_response oid=0 response=b'\xf0\x00\x00\x00\x00'
Receive: 33 1167.304508 1167.304378 13: seq: 1e, spi_transfer_response oid=2 response=b'p\x00\x00\x00\x00'
Receive: 34 1167.359724 1167.311677 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1333250990
Receive: 35 1167.375211 1167.361104 15: seq: 11, analog_in_state oid=22 next_clock=1456564736 value=31362
Receive: 36 1167.459708 1167.411469 14: seq: 12, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1373250990
Receive: 37 1167.559758 1167.511143 14: seq: 15, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1413251002
Receive: 38 1167.595146 1167.562006 15: seq: 17, analog_in_state oid=14 next_clock=1544564736 value=27296
Receive: 39 1167.647688 1167.647561 11: seq: 19, clock clock=1448438884
Receive: 40 1167.659704 1167.647561 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1453250994
Receive: 41 1167.675141 1167.661872 15: seq: 1b, analog_in_state oid=22 next_clock=1576564736 value=31361
Receive: 42 1167.759701 1167.711329 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1493250992
Receive: 43 1167.859707 1167.811456 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1533250926
Receive: 44 1167.895151 1167.861837 15: seq: 11, analog_in_state oid=14 next_clock=1664564736 value=27294
Receive: 45 1167.895593 1167.895458 13: seq: 13, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00('
Receive: 46 1167.896117 1167.895986 13: seq: 15, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 47 1167.959701 1167.911671 14: seq: 16, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1573250996
Receive: 48 1167.975134 1167.961046 15: seq: 18, analog_in_state oid=22 next_clock=1696564736 value=31361
Receive: 49 1168.059741 1168.011377 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1613250990
Receive: 50 1168.159732 1168.111120 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1653250990
Receive: 51 1168.195136 1168.161812 15: seq: 1e, analog_in_state oid=14 next_clock=1784564736 value=27296
Receive: 52 1168.259690 1168.211133 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1693250994
Receive: 53 1168.275144 1168.261454 15: seq: 11, analog_in_state oid=22 next_clock=1816564736 value=31356
Receive: 54 1168.303588 1168.303435 13: seq: 13, spi_transfer_response oid=0 response=b'\xb4\x01\x1f\x00\x00'
Receive: 55 1168.304152 1168.303995 13: seq: 15, spi_transfer_response oid=2 response=b'4\x01\x1f\x00\x00'
Receive: 56 1168.304776 1168.304622 13: seq: 17, spi_transfer_response oid=0 response=b'\xb4\x00\x00\x00\x00'
Receive: 57 1168.305132 1168.304963 13: seq: 19, spi_transfer_response oid=2 response=b't\x00\x00\x00\x00'
Receive: 58 1168.359707 1168.311927 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1733250986
Receive: 59 1168.459684 1168.411820 14: seq: 1d, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1773250998
Receive: 60 1168.495152 1168.461140 15: seq: 1f, analog_in_state oid=14 next_clock=1904564736 value=27295
Receive: 61 1168.559735 1168.511505 14: seq: 10, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1813250990
Receive: 62 1168.575133 1168.561408 15: seq: 12, analog_in_state oid=22 next_clock=1936564736 value=31356
Receive: 63 1168.632139 1168.632013 11: seq: 14, clock clock=1842227661
Receive: 64 1168.659683 1168.632013 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1853250988
Receive: 65 1168.759677 1168.711625 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1893251004
Receive: 66 1168.795397 1168.760994 15: seq: 19, analog_in_state oid=14 next_clock=2024564736 value=27289
Receive: 67 1168.859689 1168.811809 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1933250994
Receive: 68 1168.875125 1168.861178 15: seq: 1c, analog_in_state oid=22 next_clock=2056564736 value=31357
Receive: 69 1168.895722 1168.895548 13: seq: 1e, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00%'
Receive: 70 1168.896256 1168.896114 13: seq: 10, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 71 1168.959675 1168.911809 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1973250988
Receive: 72 1169.059737 1169.011452 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2013250958
Receive: 73 1169.095116 1169.061741 15: seq: 16, analog_in_state oid=14 next_clock=2144564736 value=27283
Receive: 74 1169.159692 1169.111310 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2053250994
Receive: 75 1169.175116 1169.161028 15: seq: 19, analog_in_state oid=22 next_clock=2176564736 value=31356
Receive: 76 1169.259672 1169.211370 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2093250988
Receive: 77 1169.304649 1169.304480 13: seq: 1e, spi_transfer_response oid=0 response=b'\xf4\x01\x1f\x00\x00'
Receive: 78 1169.305133 1169.304981 13: seq: 10, spi_transfer_response oid=2 response=b'4\x01\x1f\x00\x00'
Receive: 79 1169.305629 1169.305394 13: seq: 12, spi_transfer_response oid=0 response=b'\xf4\x00\x00\x00\x00'
Receive: 80 1169.306271 1169.306103 13: seq: 14, spi_transfer_response oid=2 response=b't\x00\x00\x00\x00'
Receive: 81 1169.359681 1169.311244 14: seq: 15, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2133251000
Receive: 82 1169.395113 1169.361678 15: seq: 17, analog_in_state oid=14 next_clock=2264564736 value=27284
Receive: 83 1169.459719 1169.411037 14: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2173250990
Receive: 84 1169.475133 1169.461421 15: seq: 1a, analog_in_state oid=22 next_clock=2296564736 value=31356
Receive: 85 1169.559718 1169.511848 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2213250984
Receive: 86 1169.616322 1169.616201 11: seq: 1f, clock clock=2235909986
Receive: 87 1169.659670 1169.616201 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2253250998
Receive: 88 1169.695144 1169.661522 15: seq: 11, analog_in_state oid=14 next_clock=2384564736 value=27285
Receive: 89 1169.759712 1169.711994 14: seq: 12, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2293250994
Receive: 90 1169.775377 1169.761446 15: seq: 14, analog_in_state oid=22 next_clock=2416564736 value=31361
Receive: 91 1169.859705 1169.811937 14: seq: 15, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2333250918
Receive: 92 1169.896002 1169.895872 13: seq: 19, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00%'
Receive: 93 1169.896668 1169.896449 13: seq: 1b, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 94 1169.959725 1169.911549 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2373251000
Receive: 95 1169.995105 1169.961264 15: seq: 1e, analog_in_state oid=14 next_clock=2504564736 value=27282
Receive: 96 1170.059718 1170.011678 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2413250998
Receive: 97 1170.075178 1170.061438 15: seq: 11, analog_in_state oid=22 next_clock=2536564736 value=31357
Receive: 98 1170.159702 1170.111464 14: seq: 12, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2453250920
Receive: 99 1170.171541 1170.170898 12: seq: 15, shutdown clock=2457806868 static_string_id=Command request
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=470565065781 p=-115443 i=40000 c=-500 a=0
queue_step 1: t=470585065781 p=-115943 i=40000 c=-500 a=0
queue_step 2: t=470605065781 p=-116443 i=40000 c=-500 a=0
queue_step 3: t=470625065781 p=-116943 i=40000 c=-500 a=0
queue_step 4: t=470645065781 p=-117443 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=470565065781 p=116155 i=40000 c=500 a=0
queue_step 1: t=470585065781 p=116655 i=40000 c=500 a=0
queue_step 2: t=470605065781 p=117155 i=40000 c=500 a=0
queue_step 3: t=470625065781 p=117655 i=40000 c=500 a=0
queue_step 4: t=470645065781 p=118155 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=1164.437715 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 1176.523105: (117.5, 92.5, 49.57973256250352)
Homing failed due to printer shutdown
Stats 1171.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=32487 bytes_read=156186 bytes_retransmit=9 bytes_invalid=0 send_seq=2753 receive_seq=2753 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008009 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=7845 bytes_read=26146 bytes_retransmit=0 bytes_invalid=0 send_seq=1283 receive_seq=1283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998995 adj=49997879 sd_pos=22300 heater_bed: target=60 temp=60.9 pwm=0.407 sysload=0.19 cputime=19.897 memavail=3307820 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1172.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=32549 bytes_read=156335 bytes_retransmit=9 bytes_invalid=0 send_seq=2757 receive_seq=2757 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008005 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=7851 bytes_read=26162 bytes_retransmit=0 bytes_invalid=0 send_seq=1284 receive_seq=1284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998995 adj=49997895 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.503 sysload=0.19 cputime=19.910 memavail=3307824 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1173.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=32587 bytes_read=156480 bytes_retransmit=9 bytes_invalid=0 send_seq=2760 receive_seq=2760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008021 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=7863 bytes_read=26194 bytes_retransmit=0 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999003 adj=49997932 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.411 sysload=0.19 cputime=19.931 memavail=3307824 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1174.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=32625 bytes_read=156625 bytes_retransmit=9 bytes_invalid=0 send_seq=2763 receive_seq=2763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008038 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=7869 bytes_read=26210 bytes_retransmit=0 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999007 adj=49998043 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.719 sysload=0.19 cputime=19.951 memavail=3307828 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1175.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=32658 bytes_read=156746 bytes_retransmit=9 bytes_invalid=0 send_seq=2765 receive_seq=2765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008052 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=7875 bytes_read=26226 bytes_retransmit=0 bytes_invalid=0 send_seq=1288 receive_seq=1288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999010 adj=49998056 sd_pos=22300 heater_bed: target=60 temp=60.8 pwm=0.573 sysload=0.19 cputime=19.969 memavail=3307828 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 1176.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32696 bytes_read=156905 bytes_retransmit=9 bytes_invalid=0 send_seq=2768 receive_seq=2768 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008060 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7881 bytes_read=26255 bytes_retransmit=0 bytes_invalid=0 send_seq=1289 receive_seq=1289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999012 adj=49998062 sd_pos=22300 heater_bed: target=60 temp=60.7 pwm=0.777 sysload=0.17 cputime=19.989 memavail=3307828 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1177.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32718 bytes_read=157038 bytes_retransmit=9 bytes_invalid=0 send_seq=2770 receive_seq=2770 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008069 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7887 bytes_read=26271 bytes_retransmit=0 bytes_invalid=0 send_seq=1290 receive_seq=1290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999013 adj=49998063 sd_pos=22300 heater_bed: target=60 temp=60.6 pwm=0.679 sysload=0.17 cputime=20.008 memavail=3307072 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1178.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32756 bytes_read=157168 bytes_retransmit=9 bytes_invalid=0 send_seq=2773 receive_seq=2773 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7893 bytes_read=26287 bytes_retransmit=0 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999015 adj=49998051 sd_pos=22300 heater_bed: target=60 temp=60.6 pwm=0.857 sysload=0.17 cputime=20.027 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1179.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32810 bytes_read=157325 bytes_retransmit=9 bytes_invalid=0 send_seq=2777 receive_seq=2777 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7899 bytes_read=26303 bytes_retransmit=0 bytes_invalid=0 send_seq=1292 receive_seq=1292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999017 adj=49998041 sd_pos=22300 heater_bed: target=60 temp=60.5 pwm=0.772 sysload=0.17 cputime=20.048 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1180.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32832 bytes_read=157458 bytes_retransmit=9 bytes_invalid=0 send_seq=2779 receive_seq=2779 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008098 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7905 bytes_read=26319 bytes_retransmit=0 bytes_invalid=0 send_seq=1293 receive_seq=1293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999019 adj=49998066 sd_pos=22300 heater_bed: target=60 temp=60.4 pwm=0.858 sysload=0.17 cputime=20.067 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1181.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32854 bytes_read=157590 bytes_retransmit=9 bytes_invalid=0 send_seq=2781 receive_seq=2781 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008110 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7911 bytes_read=26348 bytes_retransmit=0 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999019 adj=49998052 sd_pos=22300 heater_bed: target=60 temp=60.4 pwm=0.790 sysload=0.16 cputime=20.087 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 1182.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32919 bytes_read=157754 bytes_retransmit=9 bytes_invalid=0 send_seq=2785 receive_seq=2785 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008116 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7917 bytes_read=26364 bytes_retransmit=0 bytes_invalid=0 send_seq=1295 receive_seq=1295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999021 adj=49998025 sd_pos=22300 heater_bed: target=60 temp=60.3 pwm=0.819 sysload=0.16 cputime=20.108 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1183.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32957 bytes_read=157899 bytes_retransmit=9 bytes_invalid=0 send_seq=2788 receive_seq=2788 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008121 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7923 bytes_read=26380 bytes_retransmit=0 bytes_invalid=0 send_seq=1296 receive_seq=1296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999024 adj=49998031 sd_pos=22300 heater_bed: target=60 temp=60.3 pwm=0.830 sysload=0.16 cputime=20.128 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1184.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=32995 bytes_read=158029 bytes_retransmit=9 bytes_invalid=0 send_seq=2791 receive_seq=2791 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008126 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7929 bytes_read=26396 bytes_retransmit=0 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999024 adj=49998062 sd_pos=22300 heater_bed: target=60 temp=60.2 pwm=0.876 sysload=0.16 cputime=20.148 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1185.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33017 bytes_read=158162 bytes_retransmit=9 bytes_invalid=0 send_seq=2793 receive_seq=2793 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008145 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=7935 bytes_read=26412 bytes_retransmit=0 bytes_invalid=0 send_seq=1298 receive_seq=1298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49998040 sd_pos=22300 heater_bed: target=60 temp=60.1 pwm=0.977 sysload=0.16 cputime=20.167 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1186.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33023 bytes_read=158291 bytes_retransmit=9 bytes_invalid=0 send_seq=2794 receive_seq=2794 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008152 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7941 bytes_read=26441 bytes_retransmit=0 bytes_invalid=0 send_seq=1299 receive_seq=1299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999028 adj=49998035 sd_pos=22300 heater_bed: target=60 temp=60.0 pwm=0.977 sysload=0.14 cputime=20.185 memavail=3307076 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1187.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33061 bytes_read=158421 bytes_retransmit=9 bytes_invalid=0 send_seq=2797 receive_seq=2797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008161 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7947 bytes_read=26457 bytes_retransmit=0 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999031 adj=49998042 sd_pos=22300 heater_bed: target=60 temp=60.0 pwm=0.957 sysload=0.14 cputime=20.205 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 1188.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33115 bytes_read=158578 bytes_retransmit=9 bytes_invalid=0 send_seq=2801 receive_seq=2801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008158 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7953 bytes_read=26473 bytes_retransmit=0 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999033 adj=49998065 sd_pos=22300 heater_bed: target=60 temp=59.9 pwm=0.931 sysload=0.14 cputime=20.225 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 1189.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33137 bytes_read=158711 bytes_retransmit=9 bytes_invalid=0 send_seq=2803 receive_seq=2803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008156 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7959 bytes_read=26489 bytes_retransmit=0 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49998079 sd_pos=22300 heater_bed: target=60 temp=59.8 pwm=1.000 sysload=0.14 cputime=20.244 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 1190.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33143 bytes_read=158817 bytes_retransmit=9 bytes_invalid=0 send_seq=2804 receive_seq=2804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008156 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=7965 bytes_read=26505 bytes_retransmit=0 bytes_invalid=0 send_seq=1303 receive_seq=1303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49998113 sd_pos=22300 heater_bed: target=60 temp=59.8 pwm=1.000 sysload=0.14 cputime=20.261 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 1191.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33149 bytes_read=158938 bytes_retransmit=9 bytes_invalid=0 send_seq=2805 receive_seq=2805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008156 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7971 bytes_read=26534 bytes_retransmit=0 bytes_invalid=0 send_seq=1304 receive_seq=1304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999038 adj=49998113 sd_pos=22300 heater_bed: target=60 temp=59.7 pwm=1.000 sysload=0.13 cputime=20.280 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 1192.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33155 bytes_read=159073 bytes_retransmit=9 bytes_invalid=0 send_seq=2806 receive_seq=2806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7977 bytes_read=26550 bytes_retransmit=0 bytes_invalid=0 send_seq=1305 receive_seq=1305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999037 adj=49998099 sd_pos=22300 heater_bed: target=60 temp=59.6 pwm=1.000 sysload=0.13 cputime=20.298 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 1193.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=33177 bytes_read=159191 bytes_retransmit=9 bytes_invalid=0 send_seq=2808 receive_seq=2808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=7983 bytes_read=26566 bytes_retransmit=0 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999040 adj=49998054 sd_pos=22300 heater_bed: target=60 temp=59.6 pwm=1.000 sysload=0.13 cputime=20.317 memavail=3306580 print_time=1177.115 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 15:29:32 2023 (1690568972.8 12.4)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548178477120: New connection
webhooks client 548178477120: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000101 bytes_write=3376 bytes_read=6292 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400027599 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004340 adj=50014928  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=1.11 cputime=2.032 memavail=3333840 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548178477120
webhooks: registering remote method 'reboot_machine' for connection id: 548178477120
webhooks: registering remote method 'pause_job_queue' for connection id: 548178477120
webhooks: registering remote method 'start_job_queue' for connection id: 548178477120
Stats 17.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000101 bytes_write=3382 bytes_read=6398 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400012339 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000718 adj=49995334  heater_bed: target=0 temp=56.9 pwm=0.000 sysload=1.11 cputime=2.056 memavail=3366940 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 18.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000101 bytes_write=3388 bytes_read=6519 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009231 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=825 bytes_read=4539 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000128 adj=49994226  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=1.11 cputime=2.065 memavail=3355596 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 19.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000101 bytes_write=3394 bytes_read=6640 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008606 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999729 adj=49995074  heater_bed: target=0 temp=56.8 pwm=0.000 sysload=1.11 cputime=2.084 memavail=3326372 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 20.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000015 mcu_task_stddev=0.000101 bytes_write=3400 bytes_read=6746 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008181 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999674 adj=49995506  heater_bed: target=0 temp=56.7 pwm=0.000 sysload=1.11 cputime=2.094 memavail=3333120 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 21.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3406 bytes_read=6897 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008553 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999755 adj=49996297  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=1.10 cputime=2.104 memavail=3344088 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 22.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3412 bytes_read=7003 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008330 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999697 adj=49996966  heater_bed: target=0 temp=56.6 pwm=0.000 sysload=1.10 cputime=2.111 memavail=3342672 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 23.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3418 bytes_read=7106 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008000 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=855 bytes_read=4619 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999701 adj=49997371  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=1.10 cputime=2.118 memavail=3342924 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 24.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3424 bytes_read=7240 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007959 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999749 adj=49997834  heater_bed: target=0 temp=56.5 pwm=0.000 sysload=1.10 cputime=2.138 memavail=3315568 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 25.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3430 bytes_read=7346 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008152 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999810 adj=49998225  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=1.10 cputime=2.151 memavail=3338460 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 26.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3436 bytes_read=7466 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007979 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999805 adj=49998482  heater_bed: target=0 temp=56.4 pwm=0.000 sysload=1.18 cputime=2.161 memavail=3338532 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 27.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3442 bytes_read=7602 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008064 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999779 adj=49998520  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=1.18 cputime=2.170 memavail=3338540 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 28.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3448 bytes_read=7708 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008101 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=885 bytes_read=4712 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999764 adj=49998546  heater_bed: target=0 temp=56.3 pwm=0.000 sysload=1.18 cputime=2.179 memavail=3338544 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 29.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3454 bytes_read=7814 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008066 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999777 adj=49998535  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=1.18 cputime=2.189 memavail=3338060 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 30.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3460 bytes_read=7950 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008075 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999805 adj=49998664  heater_bed: target=0 temp=56.2 pwm=0.000 sysload=1.18 cputime=2.203 memavail=3330500 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 31.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3466 bytes_read=8070 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008270 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999807 adj=49998812  heater_bed: target=0 temp=56.1 pwm=0.000 sysload=1.16 cputime=2.213 memavail=3328840 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000000
Stats 32.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=4852 bytes_read=9149 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008153 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999801 adj=49998698  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=1.16 cputime=2.253 memavail=3327112 print_time=41.965 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 33.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5279 bytes_read=9488 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008119 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=915 bytes_read=4805 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999790 adj=49998721  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=1.16 cputime=2.270 memavail=3327112 print_time=42.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 34.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5862 bytes_read=9905 bytes_retransmit=9 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007983 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999783 adj=49998794  heater_bed: target=0 temp=56.0 pwm=0.000 sysload=1.16 cputime=2.292 memavail=3330892 print_time=43.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 35.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=6457 bytes_read=10335 bytes_retransmit=9 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007881 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999780 adj=49998762  heater_bed: target=0 temp=55.9 pwm=0.000 sysload=1.16 cputime=2.317 memavail=3334684 print_time=44.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 36.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=7047 bytes_read=10808 bytes_retransmit=9 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007858 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998793  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=1.07 cputime=2.363 memavail=3334432 print_time=45.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 37.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=7642 bytes_read=11241 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007927 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49999085  heater_bed: target=0 temp=55.8 pwm=0.000 sysload=1.07 cputime=2.392 memavail=3332672 print_time=46.515 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 38.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=8513 bytes_read=11762 bytes_retransmit=9 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007862 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=945 bytes_read=4898 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999878 adj=49999352  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=1.07 cputime=2.417 memavail=3336156 print_time=47.524 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 39.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=9814 bytes_read=12834 bytes_retransmit=9 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008049 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999870 adj=49999212  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=1.07 cputime=2.460 memavail=3336404 print_time=48.546 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 40.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=10312 bytes_read=13334 bytes_retransmit=9 bytes_invalid=0 send_seq=652 receive_seq=652 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008045 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999875 adj=49998926  heater_bed: target=0 temp=55.7 pwm=0.000 sysload=1.07 cputime=2.484 memavail=3337916 print_time=49.546 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 41.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=10804 bytes_read=13833 bytes_retransmit=9 bytes_invalid=0 send_seq=685 receive_seq=685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008047 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999869 adj=49998946  heater_bed: target=0 temp=55.6 pwm=0.000 sysload=0.98 cputime=2.507 memavail=3337916 print_time=50.546 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 42.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=12067 bytes_read=14420 bytes_retransmit=9 bytes_invalid=0 send_seq=730 receive_seq=730 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008102 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999870 adj=49998888  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.98 cputime=2.585 memavail=3332624 print_time=51.646 buffer_time=0.306 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 43.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=12270 bytes_read=14679 bytes_retransmit=9 bytes_invalid=0 send_seq=746 receive_seq=746 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008097 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000422 adj=49998838  heater_bed: target=0 temp=55.5 pwm=0.000 sysload=0.98 cputime=2.602 memavail=3333880 print_time=51.646 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 15:45:04 2023 (1690569904.5 12.4)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548093669136: New connection
webhooks client 548093669136: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2986 bytes_read=5859 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007390 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50103352 adj=50004233  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.03 cputime=2.019 memavail=3331852 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548093669136
webhooks: registering remote method 'reboot_machine' for connection id: 548093669136
webhooks: registering remote method 'pause_job_queue' for connection id: 548093669136
webhooks: registering remote method 'start_job_queue' for connection id: 548093669136
Stats 17.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=2992 bytes_read=5963 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400004588 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50029777 adj=50138954  heater_bed: target=0 temp=53.0 pwm=0.000 sysload=1.03 cputime=2.043 memavail=3370800 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 18.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=2998 bytes_read=6084 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005050 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=825 bytes_read=4539 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50011514 adj=50011151  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=1.03 cputime=2.053 memavail=3355720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 19.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3004 bytes_read=6185 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005467 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004987 adj=49981531  heater_bed: target=0 temp=52.9 pwm=0.000 sysload=1.03 cputime=2.071 memavail=3331836 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 20.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3010 bytes_read=6306 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005740 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002397 adj=49975037  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=1.03 cputime=2.080 memavail=3335896 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 21.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3016 bytes_read=6427 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006383 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001168 adj=49976220  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=1.03 cputime=2.089 memavail=3343412 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 22.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3022 bytes_read=6547 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006980 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000458 adj=49979210  heater_bed: target=0 temp=52.8 pwm=0.000 sysload=1.03 cputime=2.098 memavail=3345260 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 23.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3028 bytes_read=6668 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007104 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=855 bytes_read=4632 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000179 adj=49982319  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=1.03 cputime=2.121 memavail=3339820 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 24.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3034 bytes_read=6789 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007125 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000057 adj=49985743  heater_bed: target=0 temp=52.7 pwm=0.000 sysload=1.03 cputime=2.134 memavail=3308652 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 25.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3040 bytes_read=6895 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007294 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999913 adj=49988726  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=1.11 cputime=2.147 memavail=3334616 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 26.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3046 bytes_read=7016 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007160 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999775 adj=49990763  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=1.11 cputime=2.157 memavail=3333704 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 27.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3052 bytes_read=7151 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007159 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999674 adj=49992324  heater_bed: target=0 temp=52.6 pwm=0.000 sysload=1.11 cputime=2.166 memavail=3333464 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 28.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3058 bytes_read=7257 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007272 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=885 bytes_read=4712 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49993692  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=1.11 cputime=2.175 memavail=3333468 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 29.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3064 bytes_read=7376 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007304 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999595 adj=49994700  heater_bed: target=0 temp=52.5 pwm=0.000 sysload=1.11 cputime=2.184 memavail=3332980 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 30.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3070 bytes_read=7493 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007321 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999654 adj=49995561  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=1.10 cputime=2.196 memavail=3327056 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 31.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3076 bytes_read=7599 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007400 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999635 adj=49996602  heater_bed: target=0 temp=52.4 pwm=0.000 sysload=1.10 cputime=2.206 memavail=3328068 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 32.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3082 bytes_read=7734 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007536 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999648 adj=49996995  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=1.10 cputime=2.215 memavail=3328068 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 33.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3088 bytes_read=7855 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007580 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=915 bytes_read=4805 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999646 adj=49997404  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=1.10 cputime=2.225 memavail=3328072 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 34.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3094 bytes_read=7961 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007590 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999645 adj=49997691  heater_bed: target=0 temp=52.3 pwm=0.000 sysload=1.10 cputime=2.234 memavail=3327212 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 35.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3100 bytes_read=8082 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007615 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999645 adj=49997933  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=1.01 cputime=2.244 memavail=3327328 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 36.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3112 bytes_read=8203 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007741 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999689 adj=49998104  heater_bed: target=0 temp=52.2 pwm=0.000 sysload=1.01 cputime=2.262 memavail=3323800 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 37.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3118 bytes_read=8339 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007812 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999708 adj=49998414  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=1.01 cputime=2.273 memavail=3328220 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 38.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3124 bytes_read=8460 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007776 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=945 bytes_read=4898 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999713 adj=49998547  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=1.01 cputime=2.283 memavail=3327772 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 39.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3130 bytes_read=8581 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007745 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999716 adj=49998638  heater_bed: target=0 temp=52.1 pwm=0.000 sysload=1.01 cputime=2.293 memavail=3327772 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 40.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3136 bytes_read=8682 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007753 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999717 adj=49998704  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.93 cputime=2.302 memavail=3327548 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 41.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3142 bytes_read=8802 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007823 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999723 adj=49998714  heater_bed: target=0 temp=52.0 pwm=0.000 sysload=0.93 cputime=2.312 memavail=3327548 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 42.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3148 bytes_read=8937 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007872 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999750 adj=49998703  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.93 cputime=2.329 memavail=3324532 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 43.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3154 bytes_read=9043 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007867 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999763 adj=49998857  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.93 cputime=2.339 memavail=3325540 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 44.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3160 bytes_read=9164 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007870 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=981 bytes_read=5020 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999768 adj=49998933  heater_bed: target=0 temp=51.9 pwm=0.000 sysload=0.93 cputime=2.349 memavail=3325188 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 45.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3166 bytes_read=9285 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007871 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=987 bytes_read=5036 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999775 adj=49998928  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.86 cputime=2.359 memavail=3325072 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 46.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3172 bytes_read=9391 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007867 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=993 bytes_read=5052 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999785 adj=49998938  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.86 cputime=2.368 memavail=3325220 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 47.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3178 bytes_read=9526 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007881 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=999 bytes_read=5068 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999788 adj=49998987  heater_bed: target=0 temp=51.8 pwm=0.000 sysload=0.86 cputime=2.377 memavail=3325580 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 48.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3184 bytes_read=9647 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007934 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1005 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999816 adj=49998951  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.86 cputime=2.394 memavail=3321044 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 49.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3190 bytes_read=9753 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007940 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1011 bytes_read=5113 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999823 adj=49999077  heater_bed: target=0 temp=51.7 pwm=0.000 sysload=0.86 cputime=2.405 memavail=3326596 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 50.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3196 bytes_read=9874 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007940 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1017 bytes_read=5129 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999826 adj=49999061  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.79 cputime=2.414 memavail=3326344 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 51.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3202 bytes_read=9990 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007930 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1023 bytes_read=5145 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999829 adj=49999033  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.79 cputime=2.423 memavail=3326468 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 52.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3208 bytes_read=10110 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007923 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1029 bytes_read=5161 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999832 adj=49999015  heater_bed: target=0 temp=51.6 pwm=0.000 sysload=0.79 cputime=2.432 memavail=3326468 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 53.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3214 bytes_read=10231 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007910 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1035 bytes_read=5177 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999835 adj=49999003  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.79 cputime=2.441 memavail=3326724 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 54.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3220 bytes_read=10352 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007944 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1041 bytes_read=5206 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999856 adj=49999004  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.79 cputime=2.459 memavail=3322692 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 55.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3226 bytes_read=10458 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007946 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1047 bytes_read=5222 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999859 adj=49999114  heater_bed: target=0 temp=51.5 pwm=0.000 sysload=0.72 cputime=2.469 memavail=3329628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 56.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3232 bytes_read=10579 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008004 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1053 bytes_read=5238 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49999075  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.72 cputime=2.478 memavail=3329628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 57.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3238 bytes_read=10714 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007998 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1059 bytes_read=5254 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999862 adj=49998949  heater_bed: target=0 temp=51.4 pwm=0.000 sysload=0.72 cputime=2.487 memavail=3329628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 58.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3244 bytes_read=10820 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007995 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1065 bytes_read=5270 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999865 adj=49998967  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.72 cputime=2.496 memavail=3329628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 59.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3250 bytes_read=10941 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007992 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=1071 bytes_read=5299 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999870 adj=49998979  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.72 cputime=2.506 memavail=3329388 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 60.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3256 bytes_read=11062 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008011 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=1077 bytes_read=5315 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49999000  heater_bed: target=0 temp=51.3 pwm=0.000 sysload=0.75 cputime=2.523 memavail=3325860 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 61.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3262 bytes_read=11168 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008006 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=1083 bytes_read=5331 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49999146  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.75 cputime=2.534 memavail=3328144 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 62.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3268 bytes_read=11298 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008008 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=1089 bytes_read=5347 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999891 adj=49999120  heater_bed: target=0 temp=51.2 pwm=0.000 sysload=0.75 cputime=2.543 memavail=3327920 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 63.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3274 bytes_read=11419 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008012 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000009 bytes_write=1095 bytes_read=5363 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999889 adj=49999031  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.75 cputime=2.552 memavail=3327920 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 64.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3280 bytes_read=11525 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008000 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1101 bytes_read=5392 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999888 adj=49998972  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.75 cputime=2.562 memavail=3327428 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 65.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3286 bytes_read=11646 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007996 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1107 bytes_read=5408 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999892 adj=49998951  heater_bed: target=0 temp=51.1 pwm=0.000 sysload=0.69 cputime=2.572 memavail=3328464 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 66.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3292 bytes_read=11767 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008029 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1113 bytes_read=5424 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999907 adj=49998981  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.69 cputime=2.589 memavail=3321060 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 67.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3298 bytes_read=11887 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008030 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1125 bytes_read=5456 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49999077  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.69 cputime=2.601 memavail=3331620 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 68.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3304 bytes_read=12008 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008029 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1131 bytes_read=5472 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999909 adj=49999068  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.69 cputime=2.610 memavail=3331620 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 69.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3310 bytes_read=12129 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008029 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1137 bytes_read=5501 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999908 adj=49999014  heater_bed: target=0 temp=51.0 pwm=0.000 sysload=0.69 cputime=2.621 memavail=3331156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 70.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3316 bytes_read=12235 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008023 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1143 bytes_read=5517 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999908 adj=49998969  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.63 cputime=2.630 memavail=3331156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 71.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3322 bytes_read=12356 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008023 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1149 bytes_read=5533 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999913 adj=49998964  heater_bed: target=0 temp=50.9 pwm=0.000 sysload=0.63 cputime=2.640 memavail=3331156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 72.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3328 bytes_read=12489 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008054 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1155 bytes_read=5549 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49999007  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.63 cputime=2.657 memavail=3331156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 73.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3334 bytes_read=12592 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008088 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1161 bytes_read=5565 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999918 adj=49998915  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.63 cputime=2.675 memavail=3331156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 74.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3340 bytes_read=12713 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008101 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1167 bytes_read=5594 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999916 adj=49998943  heater_bed: target=0 temp=50.8 pwm=0.000 sysload=0.63 cputime=2.693 memavail=3330916 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 75.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3346 bytes_read=12834 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008113 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1173 bytes_read=5610 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49998899  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.66 cputime=2.710 memavail=3330696 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 76.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3352 bytes_read=12940 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008127 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1179 bytes_read=5626 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999918 adj=49998824  heater_bed: target=0 temp=50.7 pwm=0.000 sysload=0.66 cputime=2.727 memavail=3330696 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 77.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3358 bytes_read=13090 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008137 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1185 bytes_read=5642 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999911 adj=49998898  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.66 cputime=2.746 memavail=3330696 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 78.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3364 bytes_read=13196 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008143 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000016 bytes_write=1191 bytes_read=5658 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999902 adj=49998804  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.66 cputime=2.762 memavail=3330696 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 79.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3370 bytes_read=13302 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008153 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1197 bytes_read=5687 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999895 adj=49998713  heater_bed: target=0 temp=50.6 pwm=0.000 sysload=0.66 cputime=2.779 memavail=3329464 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 80.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3376 bytes_read=13438 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008161 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1203 bytes_read=5703 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999883 adj=49998662  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.69 cputime=2.797 memavail=3329472 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 81.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3382 bytes_read=13544 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1209 bytes_read=5719 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999872 adj=49998568  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.69 cputime=2.814 memavail=3329472 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 82.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3388 bytes_read=13664 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008170 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1215 bytes_read=5735 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999860 adj=49998508  heater_bed: target=0 temp=50.5 pwm=0.000 sysload=0.69 cputime=2.832 memavail=3329480 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 83.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3394 bytes_read=13795 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1221 bytes_read=5751 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999850 adj=49998442  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.69 cputime=2.850 memavail=3329480 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 84.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3400 bytes_read=13900 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008187 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1227 bytes_read=5780 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999844 adj=49998399  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.69 cputime=2.867 memavail=3329004 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 85.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3406 bytes_read=14006 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008169 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1233 bytes_read=5796 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999828 adj=49998427  heater_bed: target=0 temp=50.4 pwm=0.000 sysload=0.63 cputime=2.876 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 86.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3412 bytes_read=14142 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1239 bytes_read=5812 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999813 adj=49998362  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.63 cputime=2.885 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 87.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3418 bytes_read=14262 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008155 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1245 bytes_read=5828 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999800 adj=49998299  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.63 cputime=2.894 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 88.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3424 bytes_read=14368 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008142 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1251 bytes_read=5844 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999786 adj=49998273  heater_bed: target=0 temp=50.3 pwm=0.000 sysload=0.63 cputime=2.903 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 89.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3430 bytes_read=14504 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1257 bytes_read=5873 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999774 adj=49998246  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.63 cputime=2.913 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 90.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3436 bytes_read=14610 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008144 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1263 bytes_read=5889 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999772 adj=49998244  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.58 cputime=2.931 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 91.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3442 bytes_read=14716 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008147 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1269 bytes_read=5905 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999767 adj=49998325  heater_bed: target=0 temp=50.2 pwm=0.000 sysload=0.58 cputime=2.947 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 92.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3448 bytes_read=14866 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008149 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1275 bytes_read=5921 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999762 adj=49998361  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.58 cputime=2.966 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 93.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3454 bytes_read=14972 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008157 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1281 bytes_read=5936 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999758 adj=49998398  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.58 cputime=2.983 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 94.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3460 bytes_read=15073 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1287 bytes_read=5964 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999753 adj=49998421  heater_bed: target=0 temp=50.1 pwm=0.000 sysload=0.58 cputime=3.000 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 95.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3466 bytes_read=15209 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008207 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1293 bytes_read=5979 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999749 adj=49998364  heater_bed: target=0 temp=50.0 pwm=0.000 sysload=0.53 cputime=3.018 memavail=3328552 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 138.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5140 bytes_read=21313 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008213 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1557 bytes_read=6784 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999764 adj=49998645  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.27 cputime=3.741 memavail=3329120 print_time=152.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 139.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5675 bytes_read=21695 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008186 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=1563 bytes_read=6813 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999752 adj=49998580  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.27 cputime=3.763 memavail=3329200 print_time=153.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 140.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=6320 bytes_read=22193 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008188 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=1569 bytes_read=6829 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999743 adj=49998316  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.25 cputime=3.811 memavail=3329200 print_time=154.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 141.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=6970 bytes_read=22681 bytes_retransmit=9 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008191 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=1575 bytes_read=6845 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999735 adj=49998286  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.25 cputime=3.860 memavail=3332488 print_time=155.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 142.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=7620 bytes_read=23184 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008181 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=1581 bytes_read=6861 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999722 adj=49998266  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.25 cputime=3.908 memavail=3332488 print_time=156.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 143.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=8270 bytes_read=23702 bytes_retransmit=9 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008169 host: mcu_awake=0.000 mcu_task_avg=0.000005 mcu_task_stddev=0.000010 bytes_write=1587 bytes_read=6877 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999707 adj=49998203  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.25 cputime=3.957 memavail=3332488 print_time=157.064 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 144.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=9164 bytes_read=24253 bytes_retransmit=9 bytes_invalid=0 send_seq=642 receive_seq=642 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008181 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1593 bytes_read=6906 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999692 adj=49998138  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.25 cputime=4.012 memavail=3332488 print_time=158.065 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 145.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=10443 bytes_read=25345 bytes_retransmit=9 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008201 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1599 bytes_read=6922 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999675 adj=49998020  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.23 cputime=4.096 memavail=3332244 print_time=159.093 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 146.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=10980 bytes_read=25889 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008184 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1605 bytes_read=6938 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999656 adj=49997894  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.23 cputime=4.143 memavail=3332244 print_time=160.093 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 147.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=12420 bytes_read=26593 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=51 upcoming_bytes=26 freq=400008171 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1611 bytes_read=6954 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999637 adj=49997831  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.23 cputime=4.237 memavail=3332244 print_time=161.791 buffer_time=0.889 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 148.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=12633 bytes_read=26892 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18 freq=400008187 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1617 bytes_read=6970 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999620 adj=49997909  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.23 cputime=4.264 memavail=3332244 print_time=161.791 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 149.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=12986 bytes_read=27312 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=18 freq=400008190 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1623 bytes_read=6999 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999603 adj=49997657  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.23 cputime=4.301 memavail=3332244 print_time=163.725 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 150.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=13433 bytes_read=27634 bytes_retransmit=9 bytes_invalid=0 send_seq=884 receive_seq=884 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008195 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1629 bytes_read=7015 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999586 adj=49997817  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.21 cputime=4.335 memavail=3332244 print_time=164.075 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 151.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=14135 bytes_read=28183 bytes_retransmit=9 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008180 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1635 bytes_read=7031 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999568 adj=49997612  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.21 cputime=4.385 memavail=3332244 print_time=165.075 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 548093669136
Received 16.889627: b'{"id": 548564725328, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 16.890402: b'{"id": 548564723264, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 18.363840: b'{"id": 548555484368, "method": "info", "params": {}}'
Received 18.377890: b'{"id": 548555481200, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 18.422434: b'{"id": 548555484944, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "heater_fan my_nozzle_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 18.426824: b'{"id": 548555435888, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null}}}'
Received 22.257207: b'{"id": 548590037360, "method": "info", "params": {}}'
Received 22.258065: b'{"id": 548590050752, "method": "objects/list", "params": {}}'
Received 22.258886: b'{"id": 548564703408, "method": "gcode/help", "params": {}}'
Received 22.276350: b'{"id": 548564703024, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 22.344441: b'{"id": 548555433536, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 22.430513: b'{"id": 548590047728, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null}}}'
Received 22.438387: b'{"id": 548568046992, "method": "objects/list", "params": {"objects": {}}}'
Received 22.451322: b'{"id": 548555435120, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 38.444091: b'{"id": 548564743600, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 68.475297: b'{"id": 548564717424, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 98.511033: b'{"id": 548555559600, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 128.542891: b'{"id": 548555559984, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 137.929473: b'{"id": 548555559408, "method": "gcode/script", "params": {"script": "G28"}}'
Received 151.810348: b'{"id": 548555611776, "method": "emergency_stop", "params": {}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (144.397240358, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=7141888675 clock_est=(122.547 5727353065 49999568.126) min_half_rtt=0.000054 min_rtt_time=26.775 time_avg=122.547(771.712) clock_avg=5727353065.871(38585286436.002) pred_variance=112030392.522 clock_adj=(21.671 49997608.500)
Dumping serial stats: bytes_write=1641 bytes_read=7043 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 54.344679 54.344679 6: seq: 15, get_clock
Sent 1 55.328933 55.328933 6: seq: 16, get_clock
Sent 2 56.313051 56.313051 6: seq: 17, get_clock
Sent 3 57.297125 57.297125 6: seq: 18, get_clock
Sent 4 58.282141 58.282141 6: seq: 19, get_clock
Sent 5 59.268373 59.268373 6: seq: 1a, get_clock
Sent 6 60.252696 60.252696 6: seq: 1b, get_clock
Sent 7 61.237442 61.237442 6: seq: 1c, get_clock
Sent 8 62.222112 62.222112 6: seq: 1d, get_clock
Sent 9 63.206711 63.206711 6: seq: 1e, get_clock
Sent 10 64.191721 64.191721 6: seq: 1f, get_clock
Sent 11 65.175855 65.175855 6: seq: 10, get_clock
Sent 12 66.160149 66.160149 6: seq: 11, get_clock
Sent 13 67.144932 67.144932 6: seq: 12, get_clock
Sent 14 68.129671 68.129671 6: seq: 13, get_clock
Sent 15 69.113785 69.113785 6: seq: 14, get_clock
Sent 16 70.098500 70.098500 6: seq: 15, get_clock
Sent 17 71.082590 71.082590 6: seq: 16, get_clock
Sent 18 72.066926 72.066926 6: seq: 17, get_clock
Sent 19 73.051250 73.051250 6: seq: 18, get_clock
Sent 20 74.036010 74.036010 6: seq: 19, get_clock
Sent 21 75.020378 75.020378 6: seq: 1a, get_clock
Sent 22 76.005416 76.005416 6: seq: 1b, get_clock
Sent 23 76.990475 76.990475 6: seq: 1c, get_clock
Sent 24 77.975229 77.975229 6: seq: 1d, get_clock
Sent 25 78.959508 78.959508 6: seq: 1e, get_clock
Sent 26 79.944354 79.944354 6: seq: 1f, get_clock
Sent 27 80.929299 80.929299 6: seq: 10, get_clock
Sent 28 81.914271 81.914271 6: seq: 11, get_clock
Sent 29 82.899014 82.899014 6: seq: 12, get_clock
Sent 30 83.883434 83.883434 6: seq: 13, get_clock
Sent 31 84.867427 84.867427 6: seq: 14, get_clock
Sent 32 85.852388 85.852388 6: seq: 15, get_clock
Sent 33 86.839092 86.839092 6: seq: 16, get_clock
Sent 34 87.823748 87.823748 6: seq: 17, get_clock
Sent 35 88.808499 88.808499 6: seq: 18, get_clock
Sent 36 89.793813 89.793813 6: seq: 19, get_clock
Sent 37 90.778876 90.778876 6: seq: 1a, get_clock
Sent 38 91.763687 91.763687 6: seq: 1b, get_clock
Sent 39 92.748128 92.748128 6: seq: 1c, get_clock
Sent 40 93.732916 93.732916 6: seq: 1d, get_clock
Sent 41 94.717563 94.717563 6: seq: 1e, get_clock
Sent 42 95.702022 95.702022 6: seq: 1f, get_clock
Sent 43 96.686275 96.686275 6: seq: 10, get_clock
Sent 44 97.671312 97.671312 6: seq: 11, get_clock
Sent 45 98.655421 98.655421 6: seq: 12, get_clock
Sent 46 99.639732 99.639732 6: seq: 13, get_clock
Sent 47 100.624521 100.624521 6: seq: 14, get_clock
Sent 48 101.609068 101.609068 6: seq: 15, get_clock
Sent 49 102.593821 102.593821 6: seq: 16, get_clock
Sent 50 103.578115 103.578115 6: seq: 17, get_clock
Sent 51 104.562403 104.562403 6: seq: 18, get_clock
Sent 52 105.546973 105.546973 6: seq: 19, get_clock
Sent 53 106.531136 106.531136 6: seq: 1a, get_clock
Sent 54 107.515898 107.515898 6: seq: 1b, get_clock
Sent 55 108.500071 108.500071 6: seq: 1c, get_clock
Sent 56 109.485110 109.485110 6: seq: 1d, get_clock
Sent 57 110.469334 110.469334 6: seq: 1e, get_clock
Sent 58 111.454347 111.454347 6: seq: 1f, get_clock
Sent 59 112.438578 112.438578 6: seq: 10, get_clock
Sent 60 113.423009 113.423009 6: seq: 11, get_clock
Sent 61 114.407662 114.407662 6: seq: 12, get_clock
Sent 62 115.392588 115.392588 6: seq: 13, get_clock
Sent 63 116.377662 116.377662 6: seq: 14, get_clock
Sent 64 117.362146 117.362146 6: seq: 15, get_clock
Sent 65 118.347186 118.347186 6: seq: 16, get_clock
Sent 66 119.332021 119.332021 6: seq: 17, get_clock
Sent 67 120.316115 120.316115 6: seq: 18, get_clock
Sent 68 121.301161 121.301161 6: seq: 19, get_clock
Sent 69 122.285961 122.285961 6: seq: 1a, get_clock
Sent 70 123.270329 123.270329 6: seq: 1b, get_clock
Sent 71 124.254577 124.254577 6: seq: 1c, get_clock
Sent 72 125.239230 125.239230 6: seq: 1d, get_clock
Sent 73 126.224031 126.224031 6: seq: 1e, get_clock
Sent 74 127.208663 127.208663 6: seq: 1f, get_clock
Sent 75 128.193632 128.193632 6: seq: 10, get_clock
Sent 76 129.177899 129.177899 6: seq: 11, get_clock
Sent 77 130.162620 130.162620 6: seq: 12, get_clock
Sent 78 131.147384 131.147384 6: seq: 13, get_clock
Sent 79 132.131771 132.131771 6: seq: 14, get_clock
Sent 80 133.116643 133.116643 6: seq: 15, get_clock
Sent 81 134.101551 134.101551 6: seq: 16, get_clock
Sent 82 135.086506 135.086506 6: seq: 17, get_clock
Sent 83 136.070996 136.070996 6: seq: 18, get_clock
Sent 84 137.055607 137.055607 6: seq: 19, get_clock
Sent 85 138.040003 138.040003 6: seq: 1a, get_clock
Sent 86 139.023981 139.023981 6: seq: 1b, get_clock
Sent 87 140.008775 140.008775 6: seq: 1c, get_clock
Sent 88 140.993235 140.993235 6: seq: 1d, get_clock
Sent 89 141.977583 141.977583 6: seq: 1e, get_clock
Sent 90 142.962382 142.962382 6: seq: 1f, get_clock
Sent 91 143.946979 143.946979 6: seq: 10, get_clock
Sent 92 144.931839 144.931839 6: seq: 11, get_clock
Sent 93 145.916150 145.916150 6: seq: 12, get_clock
Sent 94 146.900615 146.900615 6: seq: 13, get_clock
Sent 95 147.885272 147.885272 6: seq: 14, get_clock
Sent 96 148.869453 148.869453 6: seq: 15, get_clock
Sent 97 149.854293 149.854293 6: seq: 16, get_clock
Sent 98 150.838672 150.838672 6: seq: 17, get_clock
Sent 99 151.814632 151.814632 6: seq: 18, emergency_stop
Dumping receive queue 100 messages
Receive: 0 70.098639 70.098500 11: seq: 16, clock clock=3104929333
Receive: 1 71.082848 71.082590 11: seq: 17, clock clock=3154135910
Receive: 2 72.067112 72.066926 11: seq: 18, clock clock=3203349479
Receive: 3 73.051596 73.051250 11: seq: 19, clock clock=3252569799
Receive: 4 73.500318 73.051250 13: seq: 19, stats count=55 sum=20483 sumsq=165545
Receive: 5 74.036305 74.036010 11: seq: 1a, clock clock=3301804013
Receive: 6 75.020615 75.020378 11: seq: 1b, clock clock=3351020527
Receive: 7 76.005811 76.005416 11: seq: 1c, clock clock=3400277823
Receive: 8 76.990722 76.990475 11: seq: 1d, clock clock=3449524259
Receive: 9 77.975474 77.975229 11: seq: 1e, clock clock=3498760587
Receive: 10 78.500400 77.975229 13: seq: 1e, stats count=55 sum=27477 sumsq=290728
Receive: 11 78.959772 78.959508 11: seq: 1f, clock clock=3547975091
Receive: 12 79.944626 79.944354 11: seq: 10, clock clock=3597214447
Receive: 13 80.929539 80.929299 11: seq: 11, clock clock=3646461354
Receive: 14 81.914496 81.914271 11: seq: 12, clock clock=3695708739
Receive: 15 82.899255 82.899014 11: seq: 13, clock clock=3744946143
Receive: 16 83.500563 82.899014 13: seq: 13, stats count=55 sum=24495 sumsq=217352
Receive: 17 83.883719 83.883434 11: seq: 14, clock clock=3794168661
Receive: 18 84.867553 84.867427 11: seq: 15, clock clock=3843362499
Receive: 19 85.852510 85.852388 11: seq: 16, clock clock=3892609925
Receive: 20 86.839280 86.839092 11: seq: 17, clock clock=3941945391
Receive: 21 87.823897 87.823748 11: seq: 18, clock clock=3991176740
Receive: 22 88.600444 87.823748 13: seq: 18, stats count=56 sum=17303 sumsq=113129
Receive: 23 88.808658 88.808499 11: seq: 19, clock clock=4040414520
Receive: 24 89.794196 89.793813 11: seq: 1a, clock clock=4089685175
Receive: 25 90.779218 90.778876 11: seq: 1b, clock clock=4138936086
Receive: 26 91.764035 91.763687 11: seq: 1c, clock clock=4188176560
Receive: 27 92.748451 92.748128 10: seq: 1d, clock clock=4237398571
Receive: 28 93.600602 92.748128 13: seq: 1d, stats count=55 sum=26498 sumsq=292920
Receive: 29 93.733157 93.732916 10: seq: 1e, clock clock=4286636652
Receive: 30 94.717816 94.717563 10: seq: 1f, clock clock=40901730
Receive: 31 95.702278 95.702022 10: seq: 10, clock clock=90124521
Receive: 32 96.686544 96.686275 10: seq: 11, clock clock=139337385
Receive: 33 97.671634 97.671312 10: seq: 12, clock clock=188590712
Receive: 34 98.600661 97.671312 13: seq: 12, stats count=55 sum=24392 sumsq=219557
Receive: 35 98.655749 98.655421 11: seq: 13, clock clock=237795692
Receive: 36 99.640079 99.639732 11: seq: 14, clock clock=287011796
Receive: 37 100.624808 100.624521 11: seq: 15, clock clock=336249514
Receive: 38 101.609372 101.609068 11: seq: 16, clock clock=385476776
Receive: 39 102.594140 102.593821 11: seq: 17, clock clock=434714821
Receive: 40 103.578432 103.578115 11: seq: 18, clock clock=483929638
Receive: 41 103.700625 103.578115 13: seq: 18, stats count=57 sum=32888 sumsq=426790
Receive: 42 104.562710 104.562403 11: seq: 19, clock clock=533143165
Receive: 43 105.547238 105.546973 11: seq: 1a, clock clock=582370671
Receive: 44 106.531384 106.531136 11: seq: 1b, clock clock=631577940
Receive: 45 107.516149 107.515898 11: seq: 1c, clock clock=680816087
Receive: 46 108.500362 108.500071 11: seq: 1d, clock clock=730025979
Receive: 47 108.700671 108.500071 13: seq: 1d, stats count=55 sum=26188 sumsq=223133
Receive: 48 109.485425 109.485110 11: seq: 1e, clock clock=779278563
Receive: 49 110.469607 110.469334 11: seq: 1f, clock clock=828488417
Receive: 50 111.454624 111.454347 11: seq: 10, clock clock=877739161
Receive: 51 112.438855 112.438578 11: seq: 11, clock clock=926950705
Receive: 52 113.423402 113.423009 11: seq: 12, clock clock=976176008
Receive: 53 113.800600 113.423009 13: seq: 12, stats count=56 sum=26572 sumsq=248093
Receive: 54 114.407946 114.407662 11: seq: 13, clock clock=1025404454
Receive: 55 115.392886 115.392588 11: seq: 14, clock clock=1074651176
Receive: 56 116.377961 116.377662 11: seq: 15, clock clock=1123904672
Receive: 57 117.362391 117.362146 11: seq: 16, clock clock=1173127249
Receive: 58 118.347442 118.347186 11: seq: 17, clock clock=1222379966
Receive: 59 118.800606 118.347186 13: seq: 17, stats count=55 sum=25264 sumsq=230708
Receive: 60 119.332286 119.332021 11: seq: 18, clock clock=1271621721
Receive: 61 120.316366 120.316115 11: seq: 19, clock clock=1320826088
Receive: 62 121.301413 121.301161 11: seq: 1a, clock clock=1370078282
Receive: 63 122.286235 122.285961 11: seq: 1b, clock clock=1419319085
Receive: 64 123.270585 123.270329 11: seq: 1c, clock clock=1468536942
Receive: 65 123.800642 123.270329 13: seq: 1c, stats count=55 sum=24838 sumsq=202700
Receive: 66 124.254927 124.254577 11: seq: 1d, clock clock=1517752175
Receive: 67 125.239584 125.239230 11: seq: 1e, clock clock=1566984508
Receive: 68 126.224373 126.224031 11: seq: 1f, clock clock=1616224190
Receive: 69 127.209046 127.208663 11: seq: 10, clock clock=1665457264
Receive: 70 128.193925 128.193632 11: seq: 11, clock clock=1714702577
Receive: 71 128.800689 128.193632 13: seq: 11, stats count=55 sum=30004 sumsq=346311
Receive: 72 129.178099 129.177899 11: seq: 12, clock clock=1763913226
Receive: 73 130.162945 130.162620 11: seq: 13, clock clock=1813152777
Receive: 74 131.147674 131.147384 11: seq: 14, clock clock=1862389749
Receive: 75 132.132023 132.131771 11: seq: 15, clock clock=1911608365
Receive: 76 133.116918 133.116643 11: seq: 16, clock clock=1960852452
Receive: 77 133.900648 133.116643 13: seq: 16, stats count=56 sum=25657 sumsq=222177
Receive: 78 134.101679 134.101551 11: seq: 17, clock clock=2010093842
Receive: 79 135.086650 135.086506 11: seq: 18, clock clock=2059341718
Receive: 80 136.071155 136.070996 11: seq: 19, clock clock=2108564127
Receive: 81 137.055762 137.055607 11: seq: 1a, clock clock=2157792212
Receive: 82 138.040186 138.040003 11: seq: 1b, clock clock=2207010140
Receive: 83 139.000768 138.040003 13: seq: 1b, stats count=56 sum=15386 sumsq=73587
Receive: 84 139.024136 139.023981 11: seq: 1c, clock clock=2256205408
Receive: 85 140.009051 140.008775 11: seq: 1d, clock clock=2305446958
Receive: 86 140.993513 140.993235 11: seq: 1e, clock clock=2354669628
Receive: 87 141.977852 141.977583 11: seq: 1f, clock clock=2403882445
Receive: 88 142.962662 142.962382 11: seq: 10, clock clock=2453120445
Receive: 89 143.947239 143.946979 11: seq: 11, clock clock=2502348030
Receive: 90 144.001136 143.946979 13: seq: 11, stats count=56 sum=28036 sumsq=265204
Receive: 91 144.932077 144.931839 11: seq: 12, clock clock=2551588611
Receive: 92 145.916361 145.916150 11: seq: 13, clock clock=2600801464
Receive: 93 146.900833 146.900615 11: seq: 14, clock clock=2650023199
Receive: 94 147.885538 147.885272 11: seq: 15, clock clock=2699256819
Receive: 95 148.869711 148.869453 11: seq: 16, clock clock=2748463801
Receive: 96 149.101256 148.869453 13: seq: 16, stats count=56 sum=25441 sumsq=214577
Receive: 97 149.854566 149.854293 11: seq: 17, clock clock=2797704247
Receive: 98 150.838935 150.838672 11: seq: 18, clock clock=2846921379
Receive: 99 151.814980 151.814632 12: seq: 19, shutdown clock=2895718420 static_string_id=Command request
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=66000358552 clock_est=(123.024 54680238983 400008175.861) min_half_rtt=0.000061 min_rtt_time=138.524 time_avg=123.024(773.572) clock_avg=54680238983.402(309435031943.377) pred_variance=1134165672.820
Dumping serial stats: bytes_write=14523 bytes_read=28491 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 148.900613 148.900613 7: seq: 13, endstop_query_state oid=4
Sent 1 148.904270 148.904270 62: seq: 14, reset_step_clock oid=6 clock=0, reset_step_clock oid=12 clock=0, queue_digital_out oid=18 clock=706967874 on_ticks=260000, trsync_start oid=5 report_clock=1059017097 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=1159017097, endstop_home oid=4 clock=1059017097 sample_ticks=6000 sample_count=4 rest_ticks=40000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 2 148.964537 148.964537 13: seq: 15, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 3 148.964910 148.964910 13: seq: 16, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 4 148.965458 148.965458 13: seq: 17, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 5 148.965960 148.965960 13: seq: 18, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 6 148.966762 148.966762 13: seq: 19, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 7 148.967184 148.967184 13: seq: 1a, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 8 148.968039 148.968039 13: seq: 1b, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 9 148.968393 148.968393 13: seq: 1c, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 10 149.354859 149.354859 14: seq: 1d, get_clock, queue_digital_out oid=18 clock=938967873 on_ticks=0
Sent 11 149.533225 149.533225 13: seq: 1e, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 12 149.533701 149.533701 13: seq: 1f, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 13 149.534831 149.534831 13: seq: 10, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 14 149.535184 149.535184 13: seq: 11, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 15 149.733607 149.733607 15: seq: 12, queue_digital_out oid=18 clock=978967875 on_ticks=466000
Sent 16 149.833572 149.833572 13: seq: 13, queue_digital_out oid=18 clock=1018967874 on_ticks=0
Sent 17 149.883964 149.883964 29: seq: 14, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=12 dir=0, queue_step oid=6 interval=1065817098 count=1 add=0, queue_step oid=12 interval=1065817098 count=1 add=0
Sent 18 149.933643 149.933643 63: seq: 15, queue_step oid=6 interval=292820 count=1 add=0, queue_step oid=12 interval=292820 count=1 add=0, queue_step oid=6 interval=191755 count=4 add=-22695, queue_step oid=12 interval=191755 count=4 add=-22695, queue_step oid=6 interval=109997 count=10 add=-4471, queue_step oid=12 interval=109997 count=10 add=-4471, queue_step oid=6 interval=68108 count=22 add=-1144
Sent 19 149.933643 149.933643 45: seq: 16, queue_step oid=12 interval=68108 count=22 add=-1144, queue_step oid=6 interval=44843 count=25 add=-286, queue_step oid=12 interval=44843 count=25 add=-286, queue_step oid=6 interval=40011 count=736 add=0, queue_step oid=12 interval=40011 count=737 add=0
Sent 20 149.965074 149.965074 13: seq: 17, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 21 149.965299 149.965299 13: seq: 18, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 22 149.965519 149.965519 21: seq: 19, spi_send oid=2 data=b'o\x00\x00\x00\x00', spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 23 149.966351 149.966351 13: seq: 1a, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 24 149.966504 149.966504 13: seq: 1b, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 25 149.967488 149.967488 13: seq: 1c, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 26 149.967654 149.967654 13: seq: 1d, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 27 149.984128 149.984128 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 28 150.033882 150.033882 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 29 150.083555 150.083555 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 30 150.133200 150.133200 12: seq: 11, trsync_set_timeout oid=5 clock=1199017496
Sent 31 150.134149 150.134149 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 32 150.184121 150.184121 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 33 150.233340 150.233340 12: seq: 14, trsync_set_timeout oid=5 clock=1239017498
Sent 34 150.234247 150.234247 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 35 150.283873 150.283873 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 36 150.333268 150.333268 12: seq: 17, trsync_set_timeout oid=5 clock=1279017498
Sent 37 150.334347 150.334347 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 38 150.339630 150.339630 6: seq: 19, get_clock
Sent 39 150.384196 150.384196 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 40 150.433235 150.433235 12: seq: 1b, trsync_set_timeout oid=5 clock=1319017420
Sent 41 150.433761 150.433761 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 42 150.484486 150.484486 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 43 150.533246 150.533246 12: seq: 1e, trsync_set_timeout oid=5 clock=1359017498
Sent 44 150.534087 150.534087 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 45 150.534274 150.534274 13: seq: 10, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 46 150.534463 150.534463 13: seq: 11, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 47 150.535314 150.535314 13: seq: 12, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 48 150.535389 150.535389 13: seq: 13, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 49 150.583982 150.583982 21: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 50 150.633179 150.633179 12: seq: 15, trsync_set_timeout oid=5 clock=1399017492
Sent 51 150.633623 150.633623 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 52 150.684318 150.684318 21: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 53 150.733204 150.733204 12: seq: 18, trsync_set_timeout oid=5 clock=1439017498
Sent 54 150.733998 150.733998 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 55 150.783688 150.783688 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 56 150.833193 150.833193 12: seq: 1b, trsync_set_timeout oid=5 clock=1479017492
Sent 57 150.834368 150.834368 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 58 150.884586 150.884586 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 59 150.933220 150.933220 12: seq: 1e, trsync_set_timeout oid=5 clock=1519017502
Sent 60 150.934306 150.934306 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 61 150.965777 150.965777 13: seq: 10, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 62 150.965918 150.965918 13: seq: 11, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 63 150.966264 150.966264 13: seq: 12, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 64 150.966789 150.966789 13: seq: 13, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 65 150.967292 150.967292 13: seq: 14, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 66 150.967744 150.967744 13: seq: 15, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 67 150.968216 150.968216 13: seq: 16, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 68 150.968630 150.968630 13: seq: 17, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 69 150.984282 150.984282 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 70 151.033397 151.033397 12: seq: 19, trsync_set_timeout oid=5 clock=1559017496
Sent 71 151.034057 151.034057 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 72 151.083888 151.083888 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 73 151.133157 151.133157 12: seq: 1c, trsync_set_timeout oid=5 clock=1599017498
Sent 74 151.133587 151.133587 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 75 151.183534 151.183534 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 76 151.233285 151.233285 12: seq: 1f, trsync_set_timeout oid=5 clock=1639017500
Sent 77 151.234154 151.234154 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 78 151.284317 151.284317 21: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 79 151.323854 151.323854 6: seq: 12, get_clock
Sent 80 151.333152 151.333152 12: seq: 13, trsync_set_timeout oid=5 clock=1679017416
Sent 81 151.333564 151.333564 21: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 82 151.384185 151.384185 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 83 151.433203 151.433203 12: seq: 16, trsync_set_timeout oid=5 clock=1719017492
Sent 84 151.433868 151.433868 21: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 85 151.483679 151.483679 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 86 151.533222 151.533222 12: seq: 19, trsync_set_timeout oid=5 clock=1759017502
Sent 87 151.533759 151.533759 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 88 151.534118 151.534118 13: seq: 1b, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 89 151.534300 151.534300 13: seq: 1c, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 90 151.535151 151.535151 13: seq: 1d, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 91 151.535225 151.535225 13: seq: 1e, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 92 151.583606 151.583606 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 93 151.633151 151.633151 12: seq: 10, trsync_set_timeout oid=5 clock=1799017486
Sent 94 151.634239 151.634239 21: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 95 151.683838 151.683838 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 96 151.733243 151.733243 12: seq: 13, trsync_set_timeout oid=5 clock=1839017492
Sent 97 151.733669 151.733669 21: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 98 151.784175 151.784175 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 99 151.814636 151.814636 6: seq: 16, emergency_stop
Dumping receive queue 100 messages
Receive: 0 147.149662 147.102117 14: seq: 1f, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=4201022302
Receive: 1 147.176459 147.151708 14: seq: 11, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=4211740432
Receive: 2 147.176711 147.176506 10: seq: 12, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 3 147.178171 147.177947 10: seq: 14, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 4 147.179041 147.178806 10: seq: 15, stepper_position oid=9 pos=-40129
Receive: 5 147.180015 147.179821 13: seq: 17, spi_transfer_response oid=1 response=b't\x00\x00\x03\x06'
Receive: 6 147.181045 147.180764 14: seq: 18, endstop_state oid=10 homing=0 next_clock=4211746918 pin_value=0
Receive: 7 147.182669 147.182416 13: seq: 1a, spi_transfer_response oid=1 response=b't\x00\x00\x00\x0c'
Receive: 8 147.183665 147.183415 13: seq: 1b, spi_transfer_response oid=1 response=b't\x00\x00\x00\x00'
Receive: 9 147.270442 147.222523 14: seq: 18, analog_in_state oid=14 next_clock=71490560 value=29135
Receive: 10 147.350475 147.222523 14: seq: 18, analog_in_state oid=22 next_clock=103490560 value=31136
Receive: 11 147.350492 147.222523 15: seq: 18, stats count=741 sum=1188771 sumsq=24712089
Receive: 12 147.386220 147.385955 9: seq: 19, clock clock=673412
Receive: 13 147.531540 147.531286 13: seq: 1b, spi_transfer_response oid=1 response=b'\xb0\x00\x1f\x01\x03'
Receive: 14 147.532536 147.532320 13: seq: 1d, spi_transfer_response oid=1 response=b'\xf0\x00\x00\x00\x00'
Receive: 15 147.570467 147.532320 14: seq: 1d, analog_in_state oid=14 next_clock=191490560 value=29137
Receive: 16 147.650507 147.532320 15: seq: 1d, analog_in_state oid=22 next_clock=223490560 value=31138
Receive: 17 147.870481 147.532320 15: seq: 1d, analog_in_state oid=14 next_clock=311490560 value=29137
Receive: 18 147.950440 147.532320 15: seq: 1d, analog_in_state oid=22 next_clock=343490560 value=31137
Receive: 19 147.964109 147.963871 13: seq: 1f, spi_transfer_response oid=0 response=b'\xb0\x00\x1f\x00\x87'
Receive: 20 147.965176 147.964938 13: seq: 11, spi_transfer_response oid=0 response=b'\xb0\x00\x00\x00\x00'
Receive: 21 147.965883 147.965400 13: seq: 13, spi_transfer_response oid=2 response=b'\xf0\x00\x1f\x00\x9b'
Receive: 22 147.967139 147.966917 13: seq: 15, spi_transfer_response oid=2 response=b'\xf0\x00\x00\x00\x00'
Receive: 23 148.170470 147.966917 15: seq: 15, analog_in_state oid=14 next_clock=431490560 value=29136
Receive: 24 148.250494 147.966917 15: seq: 15, analog_in_state oid=22 next_clock=463490560 value=31136
Receive: 25 148.370656 148.370376 11: seq: 16, clock clock=394441509
Receive: 26 148.470473 148.370376 15: seq: 16, analog_in_state oid=14 next_clock=551490560 value=29137
Receive: 27 148.532545 148.532286 13: seq: 18, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00c'
Receive: 28 148.533593 148.533383 13: seq: 1a, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 29 148.550400 148.533383 15: seq: 1a, analog_in_state oid=22 next_clock=583490560 value=31137
Receive: 30 148.770541 148.695641 15: seq: 1b, analog_in_state oid=14 next_clock=671490560 value=29136
Receive: 31 148.850416 148.795716 15: seq: 1c, analog_in_state oid=22 next_clock=703490560 value=31135
Receive: 32 148.894051 148.795716 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=603787500
Receive: 33 148.894067 148.795716 14: seq: 1c, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=603805706
Receive: 34 148.894541 148.894100 10: seq: 1d, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 35 148.895601 148.895380 10: seq: 1f, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 36 148.896464 148.896259 9: seq: 10, stepper_position oid=12 pos=3974
Receive: 37 148.897676 148.897428 13: seq: 11, spi_transfer_response oid=2 response=b'<\x00\x00\x03\xd4'
Receive: 38 148.898684 148.898459 9: seq: 12, stepper_position oid=6 pos=-4026
Receive: 39 148.899860 148.899544 13: seq: 13, spi_transfer_response oid=0 response=b'<\x00\x00\x01\xd4'
Receive: 40 148.900893 148.900613 14: seq: 14, endstop_state oid=4 homing=0 next_clock=604187183 pin_value=1
Receive: 41 148.965139 148.964910 13: seq: 17, spi_transfer_response oid=0 response=b'<\x81\x1f\x00h'
Receive: 42 148.966156 148.965960 13: seq: 19, spi_transfer_response oid=2 response=b'<\x81\x1f\x00x'
Receive: 43 148.967393 148.967184 13: seq: 1b, spi_transfer_response oid=0 response=b'<\x00\x00\x00\x00'
Receive: 44 148.968586 148.968393 13: seq: 1d, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 45 149.070425 148.968393 15: seq: 1d, analog_in_state oid=14 next_clock=791490560 value=29140
Receive: 46 149.150387 148.968393 15: seq: 1d, analog_in_state oid=22 next_clock=823490560 value=31136
Receive: 47 149.355109 149.354859 11: seq: 1e, clock clock=788243517
Receive: 48 149.370385 149.354859 15: seq: 1e, analog_in_state oid=14 next_clock=911490560 value=29139
Receive: 49 149.450433 149.354859 15: seq: 1e, analog_in_state oid=22 next_clock=943490560 value=31136
Receive: 50 149.533978 149.533701 13: seq: 10, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00_'
Receive: 51 149.535396 149.535184 13: seq: 12, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 52 149.670443 149.535184 15: seq: 12, analog_in_state oid=14 next_clock=1031490560 value=29142
Receive: 53 149.750371 149.733607 15: seq: 13, analog_in_state oid=22 next_clock=1063490560 value=31137
Receive: 54 149.965535 149.965299 13: seq: 19, spi_transfer_response oid=0 response=b'\xbc\x81\x1f\x00a'
Receive: 55 149.966037 149.965519 13: seq: 1a, spi_transfer_response oid=2 response=b'<\x81\x1f\x00l'
Receive: 56 149.966664 149.966504 13: seq: 1c, spi_transfer_response oid=0 response=b'\xbc\x00\x00\x00\x00'
Receive: 57 149.967938 149.967654 13: seq: 1e, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 58 149.970362 149.967654 15: seq: 1e, analog_in_state oid=14 next_clock=1151490560 value=29146
Receive: 59 150.032105 149.984128 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1059017394
Receive: 60 150.050356 150.033882 15: seq: 10, analog_in_state oid=22 next_clock=1183490560 value=31134
Receive: 61 150.132034 150.083555 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1099017496
Receive: 62 150.232138 150.184121 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1139017498
Receive: 63 150.270556 150.234247 15: seq: 16, analog_in_state oid=14 next_clock=1271490560 value=29142
Receive: 64 150.332081 150.283873 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1179017498
Receive: 65 150.339821 150.339630 11: seq: 1a, clock clock=1182144220
Receive: 66 150.350343 150.339630 15: seq: 1a, analog_in_state oid=22 next_clock=1303490560 value=31132
Receive: 67 150.432071 150.384196 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1219017420
Receive: 68 150.532068 150.484486 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1259017498
Receive: 69 150.534663 150.534463 13: seq: 12, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00b'
Receive: 70 150.535609 150.535389 13: seq: 14, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 71 150.570403 150.535389 15: seq: 14, analog_in_state oid=14 next_clock=1391490560 value=29146
Receive: 72 150.632014 150.583982 14: seq: 15, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1299017492
Receive: 73 150.650348 150.633623 15: seq: 17, analog_in_state oid=22 next_clock=1423490560 value=31133
Receive: 74 150.732021 150.684318 14: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1339017498
Receive: 75 150.832025 150.783688 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1379017492
Receive: 76 150.870344 150.834368 15: seq: 1d, analog_in_state oid=14 next_clock=1511490560 value=29147
Receive: 77 150.932026 150.884586 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1419017502
Receive: 78 150.950360 150.934306 15: seq: 10, analog_in_state oid=22 next_clock=1543490560 value=31134
Receive: 79 150.966204 150.965918 13: seq: 12, spi_transfer_response oid=0 response=b'\xb0\x00\x1f\x004'
Receive: 80 150.967048 150.966789 13: seq: 14, spi_transfer_response oid=2 response=b'p\x00\x1f\x00\x1a'
Receive: 81 150.967966 150.967744 13: seq: 16, spi_transfer_response oid=0 response=b'\xf0\x00\x00\x00\x00'
Receive: 82 150.968851 150.968630 13: seq: 18, spi_transfer_response oid=2 response=b'0\x00\x00\x00\x00'
Receive: 83 151.032188 150.984282 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1459017496
Receive: 84 151.131989 151.083888 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1499017498
Receive: 85 151.170333 151.133587 15: seq: 1e, analog_in_state oid=14 next_clock=1631490560 value=29150
Receive: 86 151.232086 151.183534 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1539017500
Receive: 87 151.250356 151.234154 15: seq: 11, analog_in_state oid=22 next_clock=1663490560 value=31133
Receive: 88 151.324085 151.323854 11: seq: 13, clock clock=1575849112
Receive: 89 151.331990 151.323854 14: seq: 13, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1579017416
Receive: 90 151.432014 151.384185 14: seq: 16, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1619017492
Receive: 91 151.470392 151.433868 15: seq: 18, analog_in_state oid=14 next_clock=1751490560 value=29151
Receive: 92 151.532043 151.483679 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1659017502
Receive: 93 151.534508 151.534300 13: seq: 1d, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00_'
Receive: 94 151.535442 151.535225 13: seq: 1f, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 95 151.550327 151.535225 15: seq: 1f, analog_in_state oid=22 next_clock=1783490560 value=31133
Receive: 96 151.631982 151.583606 14: seq: 10, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1699017486
Receive: 97 151.732049 151.683838 14: seq: 13, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1739017492
Receive: 98 151.770426 151.733669 15: seq: 15, analog_in_state oid=14 next_clock=1871490560 value=29151
Receive: 99 151.815453 151.814636 12: seq: 17, shutdown clock=1772171068 static_string_id=Command request
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=66143906466 p=-12273 i=40000 c=-500 a=0
queue_step 1: t=66163906466 p=-12773 i=40000 c=-500 a=0
queue_step 2: t=66183906466 p=-13273 i=40000 c=-500 a=0
queue_step 3: t=66203906466 p=-13773 i=40000 c=-500 a=0
queue_step 4: t=66223906466 p=-14273 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=66143946477 p=12326 i=40000 c=500 a=0
queue_step 1: t=66163946477 p=12826 i=40000 c=500 a=0
queue_step 2: t=66183946477 p=13326 i=40000 c=500 a=0
queue_step 3: t=66203946477 p=13826 i=40000 c=500 a=0
queue_step 4: t=66223946477 p=14326 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=163.734816 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 165.491701: (117.5, 92.5, 307.79237687499915)
Homing failed due to printer shutdown
Stats 152.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=14809 bytes_read=28793 bytes_retransmit=9 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=400008175 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1647 bytes_read=7059 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999549 adj=49997608  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.21 cputime=4.494 memavail=3329888 print_time=166.107 buffer_time=0.202 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 153.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14940 bytes_read=29029 bytes_retransmit=9 bytes_invalid=0 send_seq=982 receive_seq=982 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008160 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1653 bytes_read=7075 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999525 adj=49997583  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.21 cputime=4.509 memavail=3329892 print_time=166.107 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 154.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14946 bytes_read=29150 bytes_retransmit=9 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008150 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1659 bytes_read=7104 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999502 adj=49997441  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.21 cputime=4.519 memavail=3329892 print_time=166.107 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 155.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14952 bytes_read=29271 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008143 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1665 bytes_read=7120 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999480 adj=49997371  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.19 cputime=4.528 memavail=3329640 print_time=166.107 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 156.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14958 bytes_read=29377 bytes_retransmit=9 bytes_invalid=0 send_seq=985 receive_seq=985 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008134 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1671 bytes_read=7136 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999456 adj=49997330  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.19 cputime=4.538 memavail=3329640 print_time=166.107 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 15:48:00 2023 (1690570080.4 12.5)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548013017504: New connection
webhooks client 548013017504: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3436 bytes_read=6339 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400022048 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=803 bytes_read=4484 bytes_retransmit=0 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002117 adj=50045349  heater_bed: target=0 temp=46.8 pwm=0.000 sysload=1.11 cputime=2.065 memavail=3335520 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548013017504
webhooks: registering remote method 'reboot_machine' for connection id: 548013017504
webhooks: registering remote method 'pause_job_queue' for connection id: 548013017504
webhooks: registering remote method 'start_job_queue' for connection id: 548013017504
Stats 17.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3442 bytes_read=6475 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400012363 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=809 bytes_read=4500 bytes_retransmit=0 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998366 adj=49981746  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=1.11 cputime=2.092 memavail=3366888 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 18.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000095 bytes_write=3448 bytes_read=6594 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400010318 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=815 bytes_read=4530 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999036 adj=49982191  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=1.11 cputime=2.102 memavail=3354836 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 19.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000095 bytes_write=3454 bytes_read=6715 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009431 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=821 bytes_read=4546 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998563 adj=49987604  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=1.11 cputime=2.121 memavail=3326940 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 20.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000095 bytes_write=3460 bytes_read=6832 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008728 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=827 bytes_read=4562 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998496 adj=49989416  heater_bed: target=0 temp=46.7 pwm=0.000 sysload=1.10 cputime=2.130 memavail=3331744 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 21.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000095 bytes_write=3466 bytes_read=6938 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008530 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=833 bytes_read=4578 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998619 adj=49991546  heater_bed: target=0 temp=46.6 pwm=0.000 sysload=1.10 cputime=2.140 memavail=3345280 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 22.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000014 mcu_task_stddev=0.000095 bytes_write=3472 bytes_read=7059 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008419 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=839 bytes_read=4594 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998689 adj=49993395  heater_bed: target=0 temp=46.6 pwm=0.000 sysload=1.10 cputime=2.148 memavail=3344288 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 23.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3478 bytes_read=7194 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008129 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=845 bytes_read=4623 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998788 adj=49994708  heater_bed: target=0 temp=46.6 pwm=0.000 sysload=1.10 cputime=2.156 memavail=3344368 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 24.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3484 bytes_read=7300 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008227 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=851 bytes_read=4639 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998992 adj=49995856  heater_bed: target=0 temp=46.5 pwm=0.000 sysload=1.10 cputime=2.166 memavail=3316648 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 25.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3490 bytes_read=7421 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008356 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=857 bytes_read=4655 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999097 adj=49996958  heater_bed: target=0 temp=46.5 pwm=0.000 sysload=1.09 cputime=2.185 memavail=3339836 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 26.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3496 bytes_read=7542 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008239 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=863 bytes_read=4671 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999112 adj=49997517  heater_bed: target=0 temp=46.5 pwm=0.000 sysload=1.09 cputime=2.195 memavail=3339872 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 27.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3502 bytes_read=7648 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008249 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=869 bytes_read=4687 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999219 adj=49997923  heater_bed: target=0 temp=46.5 pwm=0.000 sysload=1.09 cputime=2.212 memavail=3331056 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.5 pwm=0.000
Stats 28.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3508 bytes_read=7783 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008264 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=875 bytes_read=4716 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999306 adj=49998378  heater_bed: target=0 temp=46.4 pwm=0.000 sysload=1.09 cputime=2.224 memavail=3330844 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 29.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3514 bytes_read=7904 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008380 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=881 bytes_read=4732 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999315 adj=49998681  heater_bed: target=0 temp=46.4 pwm=0.000 sysload=1.09 cputime=2.234 memavail=3330908 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 30.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3520 bytes_read=8010 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008297 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=887 bytes_read=4748 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999356 adj=49998556  heater_bed: target=0 temp=46.4 pwm=0.000 sysload=1.08 cputime=2.245 memavail=3328876 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 31.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3526 bytes_read=8126 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008308 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=893 bytes_read=4764 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999372 adj=49998716  heater_bed: target=0 temp=46.4 pwm=0.000 sysload=1.08 cputime=2.256 memavail=3334044 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 32.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3532 bytes_read=8247 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008208 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=899 bytes_read=4780 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999385 adj=49998686  heater_bed: target=0 temp=46.3 pwm=0.000 sysload=1.08 cputime=2.264 memavail=3334044 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 33.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3538 bytes_read=8367 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008204 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=905 bytes_read=4796 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999403 adj=49998741  heater_bed: target=0 temp=46.3 pwm=0.000 sysload=1.08 cputime=2.274 memavail=3334044 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 34.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3544 bytes_read=8488 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008187 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=911 bytes_read=4825 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999422 adj=49998743  heater_bed: target=0 temp=46.3 pwm=0.000 sysload=1.08 cputime=2.283 memavail=3333796 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 35.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3550 bytes_read=8609 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=917 bytes_read=4841 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999474 adj=49998766  heater_bed: target=0 temp=46.3 pwm=0.000 sysload=1.00 cputime=2.296 memavail=3333576 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 36.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3556 bytes_read=8715 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008259 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=923 bytes_read=4857 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999560 adj=49998965  heater_bed: target=0 temp=46.2 pwm=0.000 sysload=1.00 cputime=2.311 memavail=3328908 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 37.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3568 bytes_read=8852 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008203 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=929 bytes_read=4873 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999574 adj=49999274  heater_bed: target=0 temp=46.2 pwm=0.000 sysload=1.00 cputime=2.322 memavail=3330168 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 38.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3574 bytes_read=8987 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008207 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=935 bytes_read=4889 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999591 adj=49999213  heater_bed: target=0 temp=46.2 pwm=0.000 sysload=1.00 cputime=2.331 memavail=3329720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 39.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3580 bytes_read=9093 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008198 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=941 bytes_read=4918 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999608 adj=49999150  heater_bed: target=0 temp=46.2 pwm=0.000 sysload=1.00 cputime=2.341 memavail=3329472 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 40.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3586 bytes_read=9214 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008193 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=947 bytes_read=4934 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999620 adj=49999118  heater_bed: target=0 temp=46.1 pwm=0.000 sysload=0.92 cputime=2.350 memavail=3329232 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 41.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3592 bytes_read=9333 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008230 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=953 bytes_read=4950 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999648 adj=49999065  heater_bed: target=0 temp=46.1 pwm=0.000 sysload=0.92 cputime=2.364 memavail=3329232 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 42.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3598 bytes_read=9437 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=959 bytes_read=4966 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999690 adj=49999104  heater_bed: target=0 temp=46.1 pwm=0.000 sysload=0.92 cputime=2.379 memavail=3326328 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 43.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3604 bytes_read=9572 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008227 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=965 bytes_read=4982 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999699 adj=49999275  heater_bed: target=0 temp=46.0 pwm=0.000 sysload=0.92 cputime=2.389 memavail=3329864 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.6 pwm=0.000
Stats 44.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3610 bytes_read=9693 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008229 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=971 bytes_read=5011 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999699 adj=49999182  heater_bed: target=0 temp=46.0 pwm=0.000 sysload=0.92 cputime=2.399 memavail=3329804 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 45.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3616 bytes_read=9799 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008190 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=977 bytes_read=5027 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999707 adj=49999055  heater_bed: target=0 temp=46.0 pwm=0.000 sysload=0.84 cputime=2.408 memavail=3330404 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 46.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3622 bytes_read=9920 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008300 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=983 bytes_read=5043 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999710 adj=49999052  heater_bed: target=0 temp=46.0 pwm=0.000 sysload=0.84 cputime=2.417 memavail=3330404 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Stats 47.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3628 bytes_read=10041 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008453 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=989 bytes_read=5059 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999715 adj=49998881  heater_bed: target=0 temp=45.9 pwm=0.000 sysload=0.84 cputime=2.430 memavail=3330404 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.7 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_down
Stats 371.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5617 bytes_read=48480 bytes_retransmit=9 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400008136 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=2963 bytes_read=11134 bytes_retransmit=0 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49997692  heater_bed: target=0 temp=38.9 pwm=0.000 sysload=0.20 cputime=7.389 memavail=3327928 print_time=384.219 buffer_time=0.521 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 372.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5636 bytes_read=48606 bytes_retransmit=9 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008140 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2969 bytes_read=11163 bytes_retransmit=0 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998920 adj=49997688  heater_bed: target=0 temp=38.9 pwm=0.000 sysload=0.20 cputime=7.407 memavail=3328184 print_time=384.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 373.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5642 bytes_read=48712 bytes_retransmit=9 bytes_invalid=0 send_seq=667 receive_seq=667 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008145 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2975 bytes_read=11179 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997622  heater_bed: target=0 temp=38.9 pwm=0.000 sysload=0.20 cputime=7.425 memavail=3328184 print_time=384.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 374.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5648 bytes_read=48829 bytes_retransmit=9 bytes_invalid=0 send_seq=668 receive_seq=668 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008146 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2981 bytes_read=11195 bytes_retransmit=0 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997647  heater_bed: target=0 temp=38.9 pwm=0.000 sysload=0.20 cputime=7.443 memavail=3328184 print_time=384.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 375.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5654 bytes_read=48963 bytes_retransmit=9 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008145 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2993 bytes_read=11227 bytes_retransmit=0 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998914 adj=49997684  heater_bed: target=0 temp=38.9 pwm=0.000 sysload=0.18 cputime=7.461 memavail=3328436 print_time=384.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 376.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5660 bytes_read=49069 bytes_retransmit=9 bytes_invalid=0 send_seq=670 receive_seq=670 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=2999 bytes_read=11243 bytes_retransmit=0 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998917 adj=49997704  heater_bed: target=0 temp=38.8 pwm=0.000 sysload=0.18 cputime=7.478 memavail=3328436 print_time=384.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 377.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5681 bytes_read=49195 bytes_retransmit=9 bytes_invalid=0 send_seq=672 receive_seq=672 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=400008171 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3005 bytes_read=11272 bytes_retransmit=0 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998916 adj=49997732  heater_bed: target=0 temp=38.8 pwm=0.000 sysload=0.18 cputime=7.501 memavail=3328436 print_time=390.389 buffer_time=0.687 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 378.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5700 bytes_read=49321 bytes_retransmit=9 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008158 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3011 bytes_read=11288 bytes_retransmit=0 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998913 adj=49997797  heater_bed: target=0 temp=38.8 pwm=0.000 sysload=0.18 cputime=7.519 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 379.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5706 bytes_read=49427 bytes_retransmit=9 bytes_invalid=0 send_seq=675 receive_seq=675 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008158 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3017 bytes_read=11304 bytes_retransmit=0 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998910 adj=49997778  heater_bed: target=0 temp=38.8 pwm=0.000 sysload=0.18 cputime=7.535 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 380.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5712 bytes_read=49562 bytes_retransmit=9 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008153 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3023 bytes_read=11320 bytes_retransmit=0 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998906 adj=49997763  heater_bed: target=0 temp=38.8 pwm=0.000 sysload=0.17 cputime=7.552 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 381.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5718 bytes_read=49683 bytes_retransmit=9 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008177 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3029 bytes_read=11336 bytes_retransmit=0 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997754  heater_bed: target=0 temp=38.7 pwm=0.000 sysload=0.17 cputime=7.570 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 382.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5724 bytes_read=49789 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3035 bytes_read=11365 bytes_retransmit=0 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49997717  heater_bed: target=0 temp=38.7 pwm=0.000 sysload=0.17 cputime=7.588 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 383.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5730 bytes_read=49910 bytes_retransmit=9 bytes_invalid=0 send_seq=679 receive_seq=679 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008174 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3041 bytes_read=11381 bytes_retransmit=0 bytes_invalid=0 send_seq=482 receive_seq=482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998899 adj=49997698  heater_bed: target=0 temp=38.7 pwm=0.000 sysload=0.17 cputime=7.606 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 384.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5736 bytes_read=50031 bytes_retransmit=9 bytes_invalid=0 send_seq=680 receive_seq=680 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008170 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3047 bytes_read=11397 bytes_retransmit=0 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998897 adj=49997724  heater_bed: target=0 temp=38.7 pwm=0.000 sysload=0.17 cputime=7.623 memavail=3328440 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 385.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5742 bytes_read=50146 bytes_retransmit=9 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008154 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3053 bytes_read=11413 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998892 adj=49997732  heater_bed: target=0 temp=38.7 pwm=0.000 sysload=0.15 cputime=7.635 memavail=3328448 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 386.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5748 bytes_read=50267 bytes_retransmit=9 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008140 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3059 bytes_read=11429 bytes_retransmit=0 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997721  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.15 cputime=7.644 memavail=3328448 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 387.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5754 bytes_read=50388 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008127 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=3065 bytes_read=11458 bytes_retransmit=0 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998883 adj=49997715  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.15 cputime=7.654 memavail=3328448 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 388.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5760 bytes_read=50494 bytes_retransmit=9 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008115 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=3071 bytes_read=11474 bytes_retransmit=0 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998880 adj=49997715  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.15 cputime=7.663 memavail=3328448 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 389.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5766 bytes_read=50615 bytes_retransmit=9 bytes_invalid=0 send_seq=685 receive_seq=685 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008103 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=3077 bytes_read=11490 bytes_retransmit=0 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998887 adj=49997730  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.15 cputime=7.672 memavail=3328452 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 390.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5772 bytes_read=50750 bytes_retransmit=9 bytes_invalid=0 send_seq=686 receive_seq=686 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008092 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=3083 bytes_read=11506 bytes_retransmit=0 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49997893  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.14 cputime=7.687 memavail=3328452 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 391.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5778 bytes_read=50856 bytes_retransmit=9 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008088 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=3089 bytes_read=11522 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998900 adj=49998124  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.14 cputime=7.704 memavail=3328452 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 392.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5784 bytes_read=50977 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008094 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=3095 bytes_read=11551 bytes_retransmit=0 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998900 adj=49998057  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.14 cputime=7.722 memavail=3328600 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 393.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5790 bytes_read=51098 bytes_retransmit=9 bytes_invalid=0 send_seq=689 receive_seq=689 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008100 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=3101 bytes_read=11567 bytes_retransmit=0 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49998012  heater_bed: target=0 temp=38.6 pwm=0.000 sysload=0.14 cputime=7.740 memavail=3328704 print_time=390.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
probe: open
Stats 394.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5803 bytes_read=51223 bytes_retransmit=9 bytes_invalid=0 send_seq=691 receive_seq=691 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008103 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=3107 bytes_read=11583 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998901 adj=49997977  heater_bed: target=0 temp=38.5 pwm=0.000 sysload=0.14 cputime=7.760 memavail=3328452 print_time=406.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 395.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5809 bytes_read=51357 bytes_retransmit=9 bytes_invalid=0 send_seq=692 receive_seq=692 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008106 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=3113 bytes_read=11599 bytes_retransmit=0 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998902 adj=49997952  heater_bed: target=0 temp=38.5 pwm=0.000 sysload=0.13 cputime=7.776 memavail=3328204 print_time=406.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 396.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5815 bytes_read=51474 bytes_retransmit=9 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008120 host: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=3119 bytes_read=11615 bytes_retransmit=0 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998903 adj=49997950  heater_bed: target=0 temp=38.5 pwm=0.000 sysload=0.13 cputime=7.793 memavail=3328204 print_time=406.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 397.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5821 bytes_read=51580 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008115 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3125 bytes_read=11644 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997929  heater_bed: target=0 temp=38.5 pwm=0.000 sysload=0.13 cputime=7.811 memavail=3328944 print_time=406.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 398.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5827 bytes_read=51701 bytes_retransmit=9 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008108 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3131 bytes_read=11660 bytes_retransmit=0 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998905 adj=49997954  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.13 cputime=7.828 memavail=3328960 print_time=406.272 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_down
Stats 399.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5861 bytes_read=51832 bytes_retransmit=9 bytes_invalid=0 send_seq=698 receive_seq=698 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008129 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3137 bytes_read=11676 bytes_retransmit=0 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998906 adj=49997949  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.13 cputime=7.851 memavail=3328456 print_time=411.851 buffer_time=0.134 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 400.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5867 bytes_read=51952 bytes_retransmit=9 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008130 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3143 bytes_read=11692 bytes_retransmit=0 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998908 adj=49997907  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.12 cputime=7.869 memavail=3328456 print_time=411.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 401.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5873 bytes_read=52073 bytes_retransmit=9 bytes_invalid=0 send_seq=700 receive_seq=700 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008129 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3149 bytes_read=11708 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998909 adj=49997929  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.12 cputime=7.886 memavail=3328456 print_time=411.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 402.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5879 bytes_read=52194 bytes_retransmit=9 bytes_invalid=0 send_seq=701 receive_seq=701 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3155 bytes_read=11724 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998911 adj=49997937  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.12 cputime=7.904 memavail=3328604 print_time=411.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 403.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5885 bytes_read=52300 bytes_retransmit=9 bytes_invalid=0 send_seq=702 receive_seq=702 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008136 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3161 bytes_read=11753 bytes_retransmit=0 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998913 adj=49997965  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.12 cputime=7.922 memavail=3328708 print_time=411.851 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 404.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5906 bytes_read=52426 bytes_retransmit=9 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400008142 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3167 bytes_read=11769 bytes_retransmit=0 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997957  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.12 cputime=7.944 memavail=3328208 print_time=417.167 buffer_time=0.447 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 405.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5926 bytes_read=52577 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008167 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3173 bytes_read=11785 bytes_retransmit=0 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998922 adj=49998030  heater_bed: target=0 temp=38.4 pwm=0.000 sysload=0.11 cputime=7.963 memavail=3328244 print_time=417.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.5 pwm=0.000
Stats 406.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5932 bytes_read=52680 bytes_retransmit=9 bytes_invalid=0 send_seq=707 receive_seq=707 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008198 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3179 bytes_read=11801 bytes_retransmit=0 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49998001  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.11 cputime=7.980 memavail=3328244 print_time=417.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 407.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5938 bytes_read=52799 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008188 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=3185 bytes_read=11817 bytes_retransmit=0 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997960  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.11 cputime=7.996 memavail=3328392 print_time=417.167 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Must home X and Y axes first
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
Pausing toolhead to calculate stepper_x phase offset
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 408.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=7308 bytes_read=53918 bytes_retransmit=9 bytes_invalid=0 send_seq=789 receive_seq=789 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008173 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3191 bytes_read=11846 bytes_retransmit=0 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998930 adj=49998004  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.11 cputime=8.058 memavail=3325232 print_time=420.912 buffer_time=0.190 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Pausing toolhead to calculate stepper_z phase offset
Stats 409.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=7470 bytes_read=54162 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008159 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3197 bytes_read=11862 bytes_retransmit=0 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998926 adj=49998041  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.11 cputime=8.074 memavail=3324980 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 410.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7580 bytes_read=54390 bytes_retransmit=9 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008148 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3203 bytes_read=11878 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998922 adj=49997982  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.10 cputime=8.087 memavail=3328768 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 411.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7690 bytes_read=54603 bytes_retransmit=9 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008135 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3209 bytes_read=11894 bytes_retransmit=0 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998919 adj=49997925  heater_bed: target=0 temp=38.3 pwm=0.000 sysload=0.10 cputime=8.098 memavail=3328768 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 412.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7780 bytes_read=54781 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008118 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3215 bytes_read=11910 bytes_retransmit=0 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998917 adj=49997900  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.10 cputime=8.110 memavail=3328768 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 413.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=7890 bytes_read=54994 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008124 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=3221 bytes_read=11939 bytes_retransmit=0 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998915 adj=49997878  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.10 cputime=8.131 memavail=3328768 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 414.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=8000 bytes_read=55207 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008122 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=3227 bytes_read=11955 bytes_retransmit=0 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998918 adj=49997842  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.10 cputime=8.156 memavail=3328296 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 415.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=8110 bytes_read=55420 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008125 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=3233 bytes_read=11971 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998923 adj=49997913  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.09 cputime=8.181 memavail=3328560 print_time=420.912 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 416.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=8464 bytes_read=55668 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=23 upcoming_bytes=0 freq=400008128 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=3239 bytes_read=11987 bytes_retransmit=0 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998925 adj=49997979  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.09 cputime=8.215 memavail=3328560 print_time=429.294 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 417.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=8963 bytes_read=56012 bytes_retransmit=9 bytes_invalid=0 send_seq=891 receive_seq=891 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008115 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=3245 bytes_read=12003 bytes_retransmit=0 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998927 adj=49997982  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.09 cputime=8.253 memavail=3329300 print_time=429.894 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 418.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=9608 bytes_read=56492 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008112 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=3251 bytes_read=12032 bytes_retransmit=0 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998932 adj=49998027  heater_bed: target=0 temp=38.2 pwm=0.000 sysload=0.09 cputime=8.301 memavail=3327552 print_time=430.894 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 419.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=10258 bytes_read=57010 bytes_retransmit=9 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008098 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=3257 bytes_read=12048 bytes_retransmit=0 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998933 adj=49998075  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.09 cputime=8.351 memavail=3327308 print_time=431.894 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 420.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=10908 bytes_read=57513 bytes_retransmit=9 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008087 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=3263 bytes_read=12064 bytes_retransmit=0 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998934 adj=49998081  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.400 memavail=3327308 print_time=432.894 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 421.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=11574 bytes_read=57996 bytes_retransmit=9 bytes_invalid=0 send_seq=1046 receive_seq=1045 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008085 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=3269 bytes_read=12080 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998935 adj=49998079  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.447 memavail=3327456 print_time=433.944 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 422.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=12435 bytes_read=58558 bytes_retransmit=9 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008083 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=3275 bytes_read=12096 bytes_retransmit=0 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998937 adj=49998065  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.502 memavail=3327812 print_time=434.898 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 423.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=13770 bytes_read=59674 bytes_retransmit=9 bytes_invalid=0 send_seq=1169 receive_seq=1169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008071 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3281 bytes_read=12125 bytes_retransmit=0 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998938 adj=49998062  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.590 memavail=3327828 print_time=435.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 424.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000004 bytes_write=14312 bytes_read=60208 bytes_retransmit=9 bytes_invalid=0 send_seq=1212 receive_seq=1212 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008057 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3287 bytes_read=12141 bytes_retransmit=0 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998940 adj=49998062  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.640 memavail=3327828 print_time=436.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 425.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=14854 bytes_read=60787 bytes_retransmit=9 bytes_invalid=0 send_seq=1255 receive_seq=1255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008049 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3293 bytes_read=12157 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998947 adj=49998088  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.690 memavail=3327324 print_time=437.932 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 426.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=16026 bytes_read=61272 bytes_retransmit=9 bytes_invalid=0 send_seq=1294 receive_seq=1294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008058 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3299 bytes_read=12173 bytes_retransmit=0 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998949 adj=49998174  heater_bed: target=0 temp=38.1 pwm=0.000 sysload=0.08 cputime=8.763 memavail=3327080 print_time=438.779 buffer_time=0.046 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 427.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=16348 bytes_read=61688 bytes_retransmit=9 bytes_invalid=0 send_seq=1320 receive_seq=1320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=41 upcoming_bytes=26 freq=400008056 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3305 bytes_read=12189 bytes_retransmit=0 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49998145  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.08 cputime=8.806 memavail=3327080 print_time=440.718 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 428.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=16769 bytes_read=62009 bytes_retransmit=9 bytes_invalid=0 send_seq=1341 receive_seq=1341 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008065 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=3311 bytes_read=12218 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49998084  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.08 cputime=8.839 memavail=3327080 print_time=440.918 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 548013017504
Received 68.600137: b'{"id": 548264877504, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 98.631648: b'{"id": 548239059456, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 128.666882: b'{"id": 548239060272, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 158.702979: b'{"id": 548239060176, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 188.739439: b'{"id": 548239059504, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 218.773245: b'{"id": 548239060272, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 248.806820: b'{"id": 548239005152, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 278.838435: b'{"id": 548239060224, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 308.874480: b'{"id": 548239060128, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 338.908914: b'{"id": 548239059648, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 368.943004: b'{"id": 548239060416, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 370.944135: b'{"id": 548239059792, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_down"}}'
Received 377.113593: b'{"id": 548239059552, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_up"}}'
Received 393.677569: b'{"id": 548239060128, "method": "gcode/script", "params": {"script": "QUERY_PROBE"}}'
Received 398.575095: b'{"id": 548239059456, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_down"}}'
Received 398.975649: b'{"id": 548239059792, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 403.890907: b'{"id": 548239059648, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_up"}}'
Received 407.790811: b'{"id": 548239060224, "method": "gcode/script", "params": {"script": "G28 Z"}}'
Received 416.241638: b'{"id": 548239059504, "method": "gcode/script", "params": {"script": "G28"}}'
Received 428.726760: b'{"id": 548238930512, "method": "emergency_stop", "params": {}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (370.947308816, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=21025830095 clock_est=(399.969 19598167969 49998955.526) min_half_rtt=0.000055 min_rtt_time=95.715 time_avg=399.969(843.461) clock_avg=19598167969.295(42172173544.544) pred_variance=10523787.349 clock_adj=(20.335 49998094.500)
Dumping serial stats: bytes_write=3323 bytes_read=12246 bytes_retransmit=0 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 332.029104 332.029104 6: seq: 1d, get_clock
Sent 1 333.013674 333.013674 6: seq: 1e, get_clock
Sent 2 333.998176 333.998176 6: seq: 1f, get_clock
Sent 3 334.982699 334.982699 6: seq: 10, get_clock
Sent 4 335.967315 335.967315 6: seq: 11, get_clock
Sent 5 336.951694 336.951694 6: seq: 12, get_clock
Sent 6 337.936481 337.936481 6: seq: 13, get_clock
Sent 7 338.920780 338.920780 6: seq: 14, get_clock
Sent 8 339.905470 339.905470 6: seq: 15, get_clock
Sent 9 340.889778 340.889778 6: seq: 16, get_clock
Sent 10 341.874438 341.874438 6: seq: 17, get_clock
Sent 11 342.858674 342.858674 6: seq: 18, get_clock
Sent 12 343.843340 343.843340 6: seq: 19, get_clock
Sent 13 344.828188 344.828188 6: seq: 1a, get_clock
Sent 14 345.812714 345.812714 6: seq: 1b, get_clock
Sent 15 346.796810 346.796810 6: seq: 1c, get_clock
Sent 16 347.781788 347.781788 6: seq: 1d, get_clock
Sent 17 348.766344 348.766344 6: seq: 1e, get_clock
Sent 18 349.750907 349.750907 6: seq: 1f, get_clock
Sent 19 350.735411 350.735411 6: seq: 10, get_clock
Sent 20 351.720018 351.720018 6: seq: 11, get_clock
Sent 21 352.704257 352.704257 6: seq: 12, get_clock
Sent 22 353.688706 353.688706 6: seq: 13, get_clock
Sent 23 354.673564 354.673564 6: seq: 14, get_clock
Sent 24 355.657902 355.657902 6: seq: 15, get_clock
Sent 25 356.642979 356.642979 6: seq: 16, get_clock
Sent 26 357.627806 357.627806 6: seq: 17, get_clock
Sent 27 358.612439 358.612439 6: seq: 18, get_clock
Sent 28 359.596825 359.596825 6: seq: 19, get_clock
Sent 29 360.581858 360.581858 6: seq: 1a, get_clock
Sent 30 361.566723 361.566723 6: seq: 1b, get_clock
Sent 31 362.551784 362.551784 6: seq: 1c, get_clock
Sent 32 363.537662 363.537662 6: seq: 1d, get_clock
Sent 33 364.522398 364.522398 6: seq: 1e, get_clock
Sent 34 365.507214 365.507214 6: seq: 1f, get_clock
Sent 35 366.491784 366.491784 6: seq: 10, get_clock
Sent 36 367.476520 367.476520 6: seq: 11, get_clock
Sent 37 368.460825 368.460825 6: seq: 12, get_clock
Sent 38 369.445689 369.445689 6: seq: 13, get_clock
Sent 39 370.430064 370.430064 6: seq: 14, get_clock
Sent 40 371.414645 371.414645 6: seq: 15, get_clock
Sent 41 372.399377 372.399377 6: seq: 16, get_clock
Sent 42 373.384573 373.384573 6: seq: 17, get_clock
Sent 43 374.369675 374.369675 6: seq: 18, get_clock
Sent 44 375.354383 375.354383 6: seq: 19, get_clock
Sent 45 376.339139 376.339139 6: seq: 1a, get_clock
Sent 46 377.323337 377.323337 6: seq: 1b, get_clock
Sent 47 378.308070 378.308070 6: seq: 1c, get_clock
Sent 48 379.292383 379.292383 6: seq: 1d, get_clock
Sent 49 380.277140 380.277140 6: seq: 1e, get_clock
Sent 50 381.261431 381.261431 6: seq: 1f, get_clock
Sent 51 382.246235 382.246235 6: seq: 10, get_clock
Sent 52 383.231437 383.231437 6: seq: 11, get_clock
Sent 53 384.216356 384.216356 6: seq: 12, get_clock
Sent 54 385.200689 385.200689 6: seq: 13, get_clock
Sent 55 386.185398 386.185398 6: seq: 14, get_clock
Sent 56 387.170221 387.170221 6: seq: 15, get_clock
Sent 57 388.154967 388.154967 6: seq: 16, get_clock
Sent 58 389.138996 389.138996 6: seq: 17, get_clock
Sent 59 390.123670 390.123670 6: seq: 18, get_clock
Sent 60 391.107996 391.107996 6: seq: 19, get_clock
Sent 61 392.092607 392.092607 6: seq: 1a, get_clock
Sent 62 393.076908 393.076908 6: seq: 1b, get_clock
Sent 63 394.061226 394.061226 6: seq: 1c, get_clock
Sent 64 395.046238 395.046238 6: seq: 1d, get_clock
Sent 65 396.030470 396.030470 6: seq: 1e, get_clock
Sent 66 397.014798 397.014798 6: seq: 1f, get_clock
Sent 67 397.999380 397.999380 6: seq: 10, get_clock
Sent 68 398.983476 398.983476 6: seq: 11, get_clock
Sent 69 399.968488 399.968488 6: seq: 12, get_clock
Sent 70 400.953310 400.953310 6: seq: 13, get_clock
Sent 71 401.938323 401.938323 6: seq: 14, get_clock
Sent 72 402.922929 402.922929 6: seq: 15, get_clock
Sent 73 403.908059 403.908059 6: seq: 16, get_clock
Sent 74 404.892467 404.892467 6: seq: 17, get_clock
Sent 75 405.876940 405.876940 6: seq: 18, get_clock
Sent 76 406.861803 406.861803 6: seq: 19, get_clock
Sent 77 407.846726 407.846726 6: seq: 1a, get_clock
Sent 78 408.830878 408.830878 6: seq: 1b, get_clock
Sent 79 409.815191 409.815191 6: seq: 1c, get_clock
Sent 80 410.800238 410.800238 6: seq: 1d, get_clock
Sent 81 411.785302 411.785302 6: seq: 1e, get_clock
Sent 82 412.769962 412.769962 6: seq: 1f, get_clock
Sent 83 413.755001 413.755001 6: seq: 10, get_clock
Sent 84 414.739451 414.739451 6: seq: 11, get_clock
Sent 85 415.724387 415.724387 6: seq: 12, get_clock
Sent 86 416.708865 416.708865 6: seq: 13, get_clock
Sent 87 417.693190 417.693190 6: seq: 14, get_clock
Sent 88 418.677649 418.677649 6: seq: 15, get_clock
Sent 89 419.662008 419.662008 6: seq: 16, get_clock
Sent 90 420.646515 420.646515 6: seq: 17, get_clock
Sent 91 421.630575 421.630575 6: seq: 18, get_clock
Sent 92 422.615317 422.615317 6: seq: 19, get_clock
Sent 93 423.600340 423.600340 6: seq: 1a, get_clock
Sent 94 424.585283 424.585283 6: seq: 1b, get_clock
Sent 95 425.569508 425.569508 6: seq: 1c, get_clock
Sent 96 426.554278 426.554278 6: seq: 1d, get_clock
Sent 97 427.538823 427.538823 6: seq: 1e, get_clock
Sent 98 428.523052 428.523052 6: seq: 1f, get_clock
Sent 99 428.729766 428.729766 6: seq: 10, emergency_stop
Dumping receive queue 100 messages
Receive: 0 347.782095 347.781788 11: seq: 1e, clock clock=4103950439
Receive: 1 348.766585 348.766344 11: seq: 1f, clock clock=4153174773
Receive: 2 349.751235 349.750907 11: seq: 10, clock clock=4202404329
Receive: 3 350.735676 350.735411 10: seq: 11, clock clock=4251625426
Receive: 4 351.720358 351.720018 10: seq: 12, clock clock=5887298
Receive: 5 351.905405 351.720018 13: seq: 12, stats count=55 sum=28796 sumsq=296870
Receive: 6 352.704621 352.704257 10: seq: 13, clock clock=55099506
Receive: 7 353.689000 353.688706 10: seq: 14, clock clock=104318809
Receive: 8 354.673907 354.673564 10: seq: 15, clock clock=153560876
Receive: 9 355.658309 355.657902 11: seq: 16, clock clock=202779100
Receive: 10 356.643318 356.642979 11: seq: 17, clock clock=252029808
Receive: 11 357.005435 356.642979 13: seq: 17, stats count=56 sum=28802 sumsq=281704
Receive: 12 357.628146 357.627806 11: seq: 18, clock clock=301270106
Receive: 13 358.612939 358.612439 11: seq: 19, clock clock=350508289
Receive: 14 359.597116 359.596825 11: seq: 1a, clock clock=399717123
Receive: 15 360.582237 360.581858 11: seq: 1b, clock clock=448969555
Receive: 16 361.567059 361.566723 11: seq: 1c, clock clock=498210659
Receive: 17 362.005559 361.566723 13: seq: 1c, stats count=55 sum=27619 sumsq=254675
Receive: 18 362.552166 362.551784 11: seq: 1d, clock clock=547463649
Receive: 19 363.538009 363.537662 11: seq: 1e, clock clock=596755881
Receive: 20 364.522735 364.522398 11: seq: 1f, clock clock=645995189
Receive: 21 365.507570 365.507214 11: seq: 10, clock clock=695235008
Receive: 22 366.492087 366.491784 11: seq: 11, clock clock=744459603
Receive: 23 367.005724 366.491784 13: seq: 11, stats count=55 sum=29498 sumsq=295706
Receive: 24 367.476805 367.476520 11: seq: 12, clock clock=793694559
Receive: 25 368.461138 368.460825 11: seq: 13, clock clock=842910271
Receive: 26 369.445962 369.445689 11: seq: 14, clock clock=892148919
Receive: 27 370.430334 370.430064 11: seq: 15, clock clock=941366408
Receive: 28 371.414910 371.414645 11: seq: 16, clock clock=990594345
Receive: 29 372.105885 371.414645 13: seq: 16, stats count=56 sum=29967 sumsq=270719
Receive: 30 372.399734 372.399377 11: seq: 17, clock clock=1039832612
Receive: 31 373.384934 373.384573 11: seq: 18, clock clock=1089091655
Receive: 32 374.370010 374.369675 11: seq: 19, clock clock=1138347251
Receive: 33 375.354650 375.354383 11: seq: 1a, clock clock=1187579158
Receive: 34 376.339503 376.339139 11: seq: 1b, clock clock=1236820494
Receive: 35 377.105971 376.339139 13: seq: 1b, stats count=55 sum=28875 sumsq=314688
Receive: 36 377.323662 377.323337 11: seq: 1c, clock clock=1286025919
Receive: 37 378.308333 378.308070 11: seq: 1d, clock clock=1335259592
Receive: 38 379.292646 379.292383 11: seq: 1e, clock clock=1384474345
Receive: 39 380.277386 380.277140 11: seq: 1f, clock clock=1433710533
Receive: 40 381.261696 381.261431 11: seq: 10, clock clock=1482925436
Receive: 41 382.205996 381.261431 13: seq: 10, stats count=56 sum=26966 sumsq=256187
Receive: 42 382.246449 382.246235 11: seq: 11, clock clock=1532162522
Receive: 43 383.231688 383.231437 11: seq: 12, clock clock=1581423026
Receive: 44 384.216566 384.216356 11: seq: 13, clock clock=1630667168
Receive: 45 385.200824 385.200689 11: seq: 14, clock clock=1679880367
Receive: 46 386.185533 386.185398 11: seq: 15, clock clock=1729114767
Receive: 47 387.170386 387.170221 11: seq: 16, clock clock=1778354931
Receive: 48 387.305948 387.170221 13: seq: 16, stats count=57 sum=21986 sumsq=188738
Receive: 49 388.155118 388.154967 11: seq: 17, clock clock=1827591913
Receive: 50 389.139320 389.138996 11: seq: 18, clock clock=1876800794
Receive: 51 390.124201 390.123670 11: seq: 19, clock clock=1926039918
Receive: 52 391.108251 391.107996 11: seq: 1a, clock clock=1975242852
Receive: 53 392.092901 392.092607 11: seq: 1b, clock clock=2024473739
Receive: 54 392.306154 392.092607 13: seq: 1b, stats count=55 sum=24383 sumsq=256856
Receive: 55 393.077185 393.076908 11: seq: 1c, clock clock=2073687606
Receive: 56 394.061486 394.061226 11: seq: 1d, clock clock=2122902172
Receive: 57 395.046537 395.046238 11: seq: 1e, clock clock=2172152757
Receive: 58 396.030767 396.030470 11: seq: 1f, clock clock=2221363364
Receive: 59 397.015096 397.014798 11: seq: 10, clock clock=2270578988
Receive: 60 397.306316 397.014798 13: seq: 10, stats count=55 sum=29850 sumsq=316624
Receive: 61 397.999628 397.999380 11: seq: 11, clock clock=2319805525
Receive: 62 398.983741 398.983476 11: seq: 12, clock clock=2369010273
Receive: 63 399.968767 399.968488 11: seq: 13, clock clock=2418260554
Receive: 64 400.953571 400.953310 11: seq: 14, clock clock=2467499941
Receive: 65 401.938629 401.938323 11: seq: 15, clock clock=2516751123
Receive: 66 402.406479 401.938323 13: seq: 15, stats count=56 sum=28615 sumsq=258888
Receive: 67 402.923201 402.922929 11: seq: 16, clock clock=2565979206
Receive: 68 403.908475 403.908059 11: seq: 17, clock clock=2615239618
Receive: 69 404.892778 404.892467 11: seq: 18, clock clock=2664455511
Receive: 70 405.877257 405.876940 11: seq: 19, clock clock=2713678592
Receive: 71 406.862114 406.861803 11: seq: 1a, clock clock=2762920547
Receive: 72 407.506544 406.861803 13: seq: 1a, stats count=56 sum=31042 sumsq=328607
Receive: 73 407.847051 407.846726 11: seq: 1b, clock clock=2812165759
Receive: 74 408.831002 408.830878 11: seq: 1c, clock clock=2861366822
Receive: 75 409.815307 409.815191 11: seq: 1d, clock clock=2910581267
Receive: 76 410.800367 410.800238 11: seq: 1e, clock clock=2959833277
Receive: 77 411.785430 411.785302 11: seq: 1f, clock clock=3009085541
Receive: 78 412.606475 411.785302 13: seq: 1f, stats count=56 sum=18873 sumsq=122129
Receive: 79 412.770102 412.769962 11: seq: 10, clock clock=3058317656
Receive: 80 413.755308 413.755001 11: seq: 11, clock clock=3107573252
Receive: 81 414.739796 414.739451 11: seq: 12, clock clock=3156796075
Receive: 82 415.724653 415.724387 11: seq: 13, clock clock=3206039894
Receive: 83 416.709131 416.708865 11: seq: 14, clock clock=3255262548
Receive: 84 417.606690 416.708865 13: seq: 14, stats count=55 sum=25358 sumsq=205177
Receive: 85 417.693516 417.693190 11: seq: 15, clock clock=3304480104
Receive: 86 418.677969 418.677649 11: seq: 16, clock clock=3353699378
Receive: 87 419.662253 419.662008 11: seq: 17, clock clock=3402916171
Receive: 88 420.646769 420.646515 11: seq: 18, clock clock=3452140972
Receive: 89 421.630826 421.630575 11: seq: 19, clock clock=3501343164
Receive: 90 422.615616 422.615317 11: seq: 1a, clock clock=3550578502
Receive: 91 422.615636 422.615317 13: seq: 1a, stats count=56 sum=30639 sumsq=304391
Receive: 92 423.600645 423.600340 11: seq: 1b, clock clock=3599829754
Receive: 93 424.585690 424.585283 11: seq: 1c, clock clock=3649080379
Receive: 94 425.569756 425.569508 11: seq: 1d, clock clock=3698286884
Receive: 95 426.554535 426.554278 11: seq: 1e, clock clock=3747524297
Receive: 96 427.539085 427.538823 11: seq: 1f, clock clock=3796750677
Receive: 97 427.706841 427.538823 13: seq: 1f, stats count=56 sum=26879 sumsq=217446
Receive: 98 428.523303 428.523052 11: seq: 10, clock clock=3845960911
Receive: 99 428.731776 428.729766 12: seq: 11, shutdown clock=3856298367 static_string_id=Command request
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=176144535345 clock_est=(399.464 164722899697 400008065.133) min_half_rtt=0.000075 min_rtt_time=412.266 time_avg=399.464(843.463) clock_avg=164722899697.470(337392023527.407) pred_variance=89263709.337
Dumping serial stats: bytes_write=16958 bytes_read=62143 bytes_retransmit=9 bytes_invalid=0 send_seq=1352 receive_seq=1352 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 425.324271 425.324271 13: seq: 14, queue_step oid=9 interval=25000 count=800 add=0
Sent 1 425.373017 425.373017 12: seq: 15, trsync_set_timeout oid=11 clock=3387529030
Sent 2 425.374033 425.374033 13: seq: 16, queue_step oid=9 interval=25000 count=800 add=0
Sent 3 425.424840 425.424840 13: seq: 17, queue_step oid=9 interval=25000 count=800 add=0
Sent 4 425.473004 425.473004 12: seq: 18, trsync_set_timeout oid=11 clock=3427529023
Sent 5 425.474260 425.474260 13: seq: 19, queue_step oid=9 interval=25000 count=800 add=0
Sent 6 425.498723 425.498723 8: seq: 1a, trsync_trigger oid=11 reason=3
Sent 7 425.499856 425.499856 14: seq: 1b, endstop_home oid=10 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 8 425.500051 425.500051 8: seq: 1c, trsync_trigger oid=11 reason=3
Sent 9 425.500866 425.500866 7: seq: 1d, stepper_get_position oid=9
Sent 10 425.501709 425.501709 13: seq: 1e, spi_send oid=1 data=b'j\x00\x00\x00\x00'
Sent 11 425.501785 425.501785 13: seq: 1f, spi_transfer oid=1 data=b'j\x00\x00\x00\x00'
Sent 12 425.502713 425.502713 7: seq: 10, endstop_query_state oid=10
Sent 13 425.503543 425.503543 8: seq: 11, reset_step_clock oid=9 clock=0
Sent 14 425.504196 425.504196 21: seq: 12, spi_send oid=1 data=b'\x80\x00\x00\x00\x0c', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 15 425.505061 425.505061 21: seq: 13, spi_send oid=1 data=b'\x94\x00\x00\x00\x00', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 16 425.529017 425.529017 56: seq: 14, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=9 dir=1, set_next_step_dir oid=12 dir=1, queue_step oid=9 interval=3437919494 count=1 add=0, queue_step oid=9 interval=318032 count=1 add=0, queue_step oid=9 interval=210819 count=4 add=-27203, queue_step oid=9 interval=123905 count=8 add=-6164, queue_step oid=9 interval=79812 count=18 add=-1615
Sent 17 425.529017 425.529017 63: seq: 15, queue_step oid=6 interval=3440466600 count=1 add=0, queue_step oid=6 interval=232147 count=1 add=0, queue_step oid=12 interval=3440466600 count=1 add=0, queue_step oid=12 interval=232147 count=1 add=0, queue_step oid=6 interval=150217 count=5 add=-16395, queue_step oid=12 interval=150217 count=5 add=-16395, queue_step oid=9 interval=53273 count=34 add=-515
Sent 18 425.529017 425.529017 61: seq: 16, queue_step oid=6 interval=82148 count=12 add=-3066, queue_step oid=12 interval=82148 count=12 add=-3066, queue_step oid=6 interval=50782 count=23 add=-818, queue_step oid=12 interval=50782 count=23 add=-818, queue_step oid=9 interval=37117 count=35 add=-370, queue_step oid=6 interval=33968 count=61 add=-251, queue_step oid=12 interval=33968 count=61 add=-251
Sent 19 425.529017 425.529017 64: seq: 17, queue_step oid=9 interval=25464 count=67 add=-121, queue_step oid=6 interval=19912 count=68 add=-92, queue_step oid=12 interval=19912 count=68 add=-92, queue_step oid=9 interval=18151 count=101 add=-48, queue_step oid=6 interval=14371 count=97 add=-38, queue_step oid=12 interval=14371 count=97 add=-38, queue_step oid=9 interval=13799 count=154 add=-24
Sent 20 425.529017 425.529017 61: seq: 18, queue_step oid=6 interval=11050 count=135 add=-18, queue_step oid=12 interval=11050 count=135 add=-18, queue_step oid=6 interval=8854 count=162 add=-10, queue_step oid=12 interval=8854 count=162 add=-10, queue_step oid=9 interval=10364 count=148 add=-10, queue_step oid=6 interval=7393 count=198 add=-6, queue_step oid=12 interval=7393 count=198 add=-6, queue_step oid=9 interval=9062 count=226 add=-6
Sent 21 425.529017 425.529017 61: seq: 19, queue_step oid=6 interval=6314 count=153 add=-3, queue_step oid=12 interval=6314 count=153 add=-3, queue_step oid=9 interval=7832 count=258 add=-4, queue_step oid=6 interval=6002 count=198 add=-2, queue_step oid=12 interval=6002 count=198 add=-2, queue_step oid=6 interval=5729 count=170 add=-2, queue_step oid=12 interval=5729 count=170 add=-2, queue_step oid=9 interval=6898 count=621 add=-1
Sent 22 425.529017 425.529017 64: seq: 1a, queue_step oid=6 interval=5454 count=292 add=-1, queue_step oid=12 interval=5454 count=292 add=-1, queue_step oid=6 interval=5234 count=34428 add=0, queue_step oid=12 interval=5234 count=34428 add=0, queue_step oid=9 interval=6342 count=218 add=-1, queue_step oid=9 interval=6203 count=3976 add=0, queue_step oid=9 interval=6202 count=13761 add=0, queue_step oid=9 interval=6203 count=4004 add=0
Sent 23 425.536619 425.536619 61: seq: 1b, queue_step oid=9 interval=6202 count=6748 add=0, queue_step oid=9 interval=6202 count=7011 add=0, queue_step oid=6 interval=5234 count=10085 add=0, queue_step oid=12 interval=5234 count=10085 add=0, queue_step oid=9 interval=6205 count=1090 add=0, queue_step oid=9 interval=6338 count=243 add=1, queue_step oid=9 interval=6701 count=201 add=1, queue_step oid=6 interval=5371 count=183 add=1
Sent 24 425.536619 425.536619 61: seq: 1c, queue_step oid=12 interval=5371 count=183 add=1, queue_step oid=9 interval=6979 count=277 add=2, queue_step oid=6 interval=5616 count=375 add=2, queue_step oid=12 interval=5616 count=375 add=2, queue_step oid=9 interval=7676 count=227 add=6, queue_step oid=6 interval=6428 count=159 add=4, queue_step oid=12 interval=6428 count=159 add=4, queue_step oid=9 interval=9201 count=166 add=10
Sent 25 425.536619 425.536619 62: seq: 1d, queue_step oid=6 interval=7219 count=161 add=7, queue_step oid=12 interval=7219 count=161 add=7, queue_step oid=6 interval=8498 count=146 add=13, queue_step oid=12 interval=8498 count=146 add=13, queue_step oid=9 interval=11069 count=118 add=19, queue_step oid=6 interval=10625 count=109 add=27, queue_step oid=12 interval=10625 count=109 add=27, queue_step oid=9 interval=13684 count=136 add=49
Sent 26 425.536619 425.536619 59: seq: 1e, queue_step oid=6 interval=13984 count=74 add=66, queue_step oid=12 interval=13984 count=74 add=66, queue_step oid=6 interval=19759 count=42 add=205, queue_step oid=12 interval=19759 count=42 add=205, queue_step oid=9 interval=20912 count=62 add=125, queue_step oid=6 interval=30636 count=39 add=532, queue_step oid=12 interval=30636 count=39 add=532
Sent 27 425.536619 425.536619 62: seq: 1f, queue_step oid=9 interval=29890 count=33 add=369, queue_step oid=6 interval=54500 count=13 add=1800, queue_step oid=12 interval=54500 count=13 add=1800, queue_step oid=9 interval=44715 count=34 add=1192, queue_step oid=6 interval=78831 count=7 add=7977, queue_step oid=12 interval=78831 count=7 add=7977, queue_step oid=6 interval=156997 count=2 add=29618
Sent 28 425.536619 425.536619 59: seq: 10, queue_step oid=12 interval=156997 count=2 add=29618, queue_step oid=6 interval=272399 count=1 add=0, queue_step oid=12 interval=272399 count=1 add=0, queue_step oid=9 interval=87583 count=11 add=3730, queue_step oid=9 interval=134803 count=5 add=14332, queue_step oid=9 interval=228430 count=1 add=0, queue_step oid=9 interval=277472 count=1 add=0
Sent 29 425.850221 425.850221 55: seq: 11, spi_send oid=1 data=b'o\x00\x00\x00\x00', queue_step oid=9 interval=403009 count=1 add=0, queue_digital_out oid=18 clock=3712961161 on_ticks=590000, trsync_start oid=5 report_clock=4024961161 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=4124961161
Sent 30 425.850366 425.850366 29: seq: 12, spi_transfer oid=1 data=b'o\x00\x00\x00\x00', endstop_home oid=4 clock=4024961161 sample_ticks=6000 sample_count=4 rest_ticks=400000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 31 425.851513 425.851513 13: seq: 13, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 32 425.851610 425.851610 13: seq: 14, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 33 425.942804 425.942804 13: seq: 15, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 34 425.942901 425.942901 13: seq: 16, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 35 425.943879 425.943879 13: seq: 17, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 36 425.943966 425.943966 13: seq: 18, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 37 425.948069 425.948069 13: seq: 19, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 38 425.948159 425.948159 13: seq: 1a, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 39 425.949035 425.949035 13: seq: 1b, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 40 425.949120 425.949120 13: seq: 1c, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 41 426.047966 426.047966 6: seq: 1d, get_clock
Sent 42 426.766787 426.766787 13: seq: 1e, queue_digital_out oid=18 clock=3944961160 on_ticks=0
Sent 43 426.851105 426.851105 13: seq: 1f, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 44 426.851242 426.851242 13: seq: 10, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 45 426.852173 426.852173 13: seq: 11, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 46 426.852229 426.852229 13: seq: 12, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 47 426.943548 426.943548 13: seq: 13, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 48 426.943646 426.943646 13: seq: 14, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 49 426.944632 426.944632 13: seq: 15, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 50 426.944719 426.944719 13: seq: 16, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 51 426.949222 426.949222 21: seq: 17, spi_send oid=2 data=b'o\x00\x00\x00\x00', spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 52 426.950387 426.950387 21: seq: 18, spi_send oid=2 data=b'\x01\x00\x00\x00\x00', spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 53 427.016824 427.016824 15: seq: 19, queue_digital_out oid=18 clock=3984961161 on_ticks=466000
Sent 54 427.032424 427.032424 6: seq: 1a, get_clock
Sent 55 427.116503 427.116503 13: seq: 1b, queue_digital_out oid=18 clock=4024961161 on_ticks=0
Sent 56 427.215443 427.215443 8: seq: 1c, trsync_trigger oid=5 reason=3
Sent 57 427.217253 427.217253 14: seq: 1d, endstop_home oid=4 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 58 427.217783 427.217783 8: seq: 1e, trsync_trigger oid=5 reason=3
Sent 59 427.219074 427.219074 7: seq: 1f, stepper_get_position oid=12
Sent 60 427.220849 427.220849 13: seq: 10, spi_send oid=2 data=b'j\x00\x00\x00\x00'
Sent 61 427.221369 427.221369 13: seq: 11, spi_transfer oid=2 data=b'j\x00\x00\x00\x00'
Sent 62 427.222861 427.222861 7: seq: 12, stepper_get_position oid=6
Sent 63 427.224354 427.224354 13: seq: 13, spi_send oid=0 data=b'j\x00\x00\x00\x00'
Sent 64 427.224837 427.224837 13: seq: 14, spi_transfer oid=0 data=b'j\x00\x00\x00\x00'
Sent 65 427.226172 427.226172 7: seq: 15, endstop_query_state oid=4
Sent 66 427.227626 427.227626 11: seq: 16, reset_step_clock oid=6 clock=0, reset_step_clock oid=12 clock=0
Sent 67 427.229591 427.229591 15: seq: 17, queue_digital_out oid=18 clock=4130166037 on_ticks=260000
Sent 68 427.809603 427.809603 54: seq: 18, queue_digital_out oid=18 clock=67198740 on_ticks=0, trsync_start oid=5 report_clock=187258586 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=287258586, endstop_home oid=4 clock=187258586 sample_ticks=6000 sample_count=4 rest_ticks=40000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 69 427.852127 427.852127 13: seq: 19, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 70 427.852304 427.852304 13: seq: 1a, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 71 427.853191 427.853191 13: seq: 1b, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 72 427.853268 427.853268 13: seq: 1c, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 73 427.944359 427.944359 13: seq: 1d, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 74 427.944456 427.944456 13: seq: 1e, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 75 427.945461 427.945461 13: seq: 1f, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 76 427.945902 427.945902 13: seq: 10, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 77 427.949239 427.949239 13: seq: 11, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 78 427.949673 427.949673 13: seq: 12, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 79 427.950759 427.950759 13: seq: 13, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 80 427.951191 427.951191 13: seq: 14, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 81 428.017258 428.017258 6: seq: 15, get_clock
Sent 82 428.059715 428.059715 15: seq: 16, queue_digital_out oid=18 clock=107198741 on_ticks=466000
Sent 83 428.159463 428.159463 13: seq: 17, queue_digital_out oid=18 clock=147198741 on_ticks=0
Sent 84 428.210968 428.210968 27: seq: 18, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=12 dir=0, queue_step oid=6 interval=194058586 count=1 add=0, queue_step oid=12 interval=194058586 count=1 add=0
Sent 85 428.260699 428.260699 63: seq: 19, queue_step oid=6 interval=292820 count=1 add=0, queue_step oid=12 interval=292820 count=1 add=0, queue_step oid=6 interval=191755 count=4 add=-22695, queue_step oid=12 interval=191755 count=4 add=-22695, queue_step oid=6 interval=109997 count=10 add=-4471, queue_step oid=12 interval=109997 count=10 add=-4471, queue_step oid=6 interval=68108 count=22 add=-1144
Sent 86 428.260699 428.260699 45: seq: 1a, queue_step oid=12 interval=68108 count=22 add=-1144, queue_step oid=6 interval=44843 count=25 add=-286, queue_step oid=12 interval=44843 count=25 add=-286, queue_step oid=6 interval=40011 count=736 add=0, queue_step oid=12 interval=40011 count=737 add=0
Sent 87 428.310677 428.310677 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 88 428.360600 428.360600 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 89 428.410468 428.410468 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 90 428.459646 428.459646 12: seq: 1e, trsync_set_timeout oid=5 clock=327258980
Sent 91 428.460575 428.460575 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 92 428.510396 428.510396 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 93 428.559633 428.559633 12: seq: 11, trsync_set_timeout oid=5 clock=367258988
Sent 94 428.560120 428.560120 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 95 428.610092 428.610092 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 96 428.659591 428.659591 12: seq: 14, trsync_set_timeout oid=5 clock=407258984
Sent 97 428.660249 428.660249 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 98 428.710113 428.710113 21: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 99 428.729438 428.729438 6: seq: 17, emergency_stop
Dumping receive queue 100 messages
Receive: 0 423.971874 423.947471 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2727529023
Receive: 1 424.071844 424.025242 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2767529021
Receive: 2 424.079230 424.079037 11: seq: 13, clock clock=2770504415
Receive: 3 424.103443 424.079037 15: seq: 13, analog_in_state oid=14 next_clock=2897308160 value=30263
Receive: 4 424.171794 424.124611 14: seq: 14, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2807529026
Receive: 5 424.183424 424.174138 15: seq: 16, analog_in_state oid=22 next_clock=2929308160 value=31050
Receive: 6 424.271793 424.224732 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2847529020
Receive: 7 424.371882 424.323977 14: seq: 1a, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2887529034
Receive: 8 424.403439 424.374724 15: seq: 1c, analog_in_state oid=14 next_clock=3017308160 value=30269
Receive: 9 424.471846 424.424677 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2927529026
Receive: 10 424.483377 424.474860 15: seq: 1f, analog_in_state oid=22 next_clock=3049308160 value=31049
Receive: 11 424.571825 424.524740 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2967529020
Receive: 12 424.671774 424.624043 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3007529034
Receive: 13 424.703364 424.674553 15: seq: 15, analog_in_state oid=14 next_clock=3137308160 value=30266
Receive: 14 424.771805 424.723994 14: seq: 16, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3047529034
Receive: 15 424.783384 424.774671 15: seq: 18, analog_in_state oid=22 next_clock=3169308160 value=31049
Receive: 16 424.850214 424.849948 13: seq: 1b, spi_transfer_response oid=1 response=b'p\x00\x1f\x001'
Receive: 17 424.851382 424.851174 13: seq: 1d, spi_transfer_response oid=1 response=b'p\x00\x00\x00\x00'
Receive: 18 424.871809 424.851174 14: seq: 1d, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3087529015
Receive: 19 424.942000 424.941758 13: seq: 12, spi_transfer_response oid=0 response=b'|\x81\x1f\x00\\'
Receive: 20 424.943080 424.942833 13: seq: 14, spi_transfer_response oid=0 response=b'|\x00\x00\x00\x00'
Receive: 21 424.947301 424.947049 13: seq: 16, spi_transfer_response oid=2 response=b'|\x81\x1f\x00['
Receive: 22 424.948186 424.948003 13: seq: 18, spi_transfer_response oid=2 response=b'|\x00\x00\x00\x00'
Receive: 23 424.971880 424.948003 14: seq: 18, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3127529034
Receive: 24 425.003406 424.974784 15: seq: 1a, analog_in_state oid=14 next_clock=3257308160 value=30264
Receive: 25 425.063296 425.063091 11: seq: 1c, clock clock=3164138535
Receive: 26 425.071764 425.063091 14: seq: 1c, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3167529022
Receive: 27 425.083362 425.074684 15: seq: 1e, analog_in_state oid=22 next_clock=3289308160 value=31047
Receive: 28 425.156219 425.124309 15: seq: 1f, stats count=713 sum=1111782 sumsq=22682068
Receive: 29 425.171774 425.124309 14: seq: 1f, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3207529018
Receive: 30 425.271770 425.224867 14: seq: 12, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3247529034
Receive: 31 425.303356 425.274684 15: seq: 14, analog_in_state oid=14 next_clock=3377308160 value=30265
Receive: 32 425.371819 425.324271 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3287529030
Receive: 33 425.383371 425.374033 15: seq: 17, analog_in_state oid=22 next_clock=3409308160 value=31048
Receive: 34 425.471816 425.424840 14: seq: 18, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3327529023
Receive: 35 425.498675 425.474260 14: seq: 1a, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=3338297150
Receive: 36 425.498922 425.498723 10: seq: 1b, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 37 425.500277 425.500051 10: seq: 1d, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 38 425.501071 425.500866 10: seq: 1e, stepper_position oid=9 pos=-40129
Receive: 39 425.501960 425.501785 13: seq: 10, spi_transfer_response oid=1 response=b't\x00\x00\x03\x06'
Receive: 40 425.502926 425.502713 14: seq: 11, endstop_state oid=10 homing=0 next_clock=3338303636 pin_value=0
Receive: 41 425.504422 425.504196 13: seq: 13, spi_transfer_response oid=1 response=b't\x00\x00\x00\x0c'
Receive: 42 425.505285 425.505061 13: seq: 14, spi_transfer_response oid=1 response=b't\x00\x00\x00\x00'
Receive: 43 425.603386 425.536619 15: seq: 11, analog_in_state oid=14 next_clock=3497308160 value=30264
Receive: 44 425.683415 425.536619 15: seq: 11, analog_in_state oid=22 next_clock=3529308160 value=31051
Receive: 45 425.850647 425.850366 13: seq: 13, spi_transfer_response oid=1 response=b'\xf0\x00\x1f\x01\x07'
Receive: 46 425.851806 425.851610 13: seq: 15, spi_transfer_response oid=1 response=b'\xb0\x00\x00\x00\x00'
Receive: 47 425.903377 425.851610 15: seq: 15, analog_in_state oid=14 next_clock=3617308160 value=30261
Receive: 48 425.943095 425.942901 13: seq: 17, spi_transfer_response oid=0 response=b'\xb0\x00\x1f\x00\x82'
Receive: 49 425.944156 425.943966 13: seq: 19, spi_transfer_response oid=0 response=b'\xb0\x00\x00\x00\x00'
Receive: 50 425.948357 425.948159 13: seq: 1b, spi_transfer_response oid=2 response=b'\xb0\x00\x1f\x00\x98'
Receive: 51 425.949303 425.949120 13: seq: 1d, spi_transfer_response oid=2 response=b'\xf0\x00\x00\x00\x00'
Receive: 52 425.983435 425.949120 15: seq: 1d, analog_in_state oid=22 next_clock=3649308160 value=31052
Receive: 53 426.048244 426.047966 11: seq: 1e, clock clock=3558110533
Receive: 54 426.203415 426.047966 15: seq: 1e, analog_in_state oid=14 next_clock=3737308160 value=30262
Receive: 55 426.283400 426.047966 15: seq: 1e, analog_in_state oid=22 next_clock=3769308160 value=31050
Receive: 56 426.503408 426.047966 15: seq: 1e, analog_in_state oid=14 next_clock=3857308160 value=30268
Receive: 57 426.583488 426.047966 15: seq: 1e, analog_in_state oid=22 next_clock=3889308160 value=31053
Receive: 58 426.803336 426.766787 15: seq: 1f, analog_in_state oid=14 next_clock=3977308160 value=30270
Receive: 59 426.851467 426.851242 13: seq: 11, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00]'
Receive: 60 426.852426 426.852229 13: seq: 13, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 61 426.883354 426.852229 15: seq: 13, analog_in_state oid=22 next_clock=4009308160 value=31049
Receive: 62 426.943877 426.943646 13: seq: 15, spi_transfer_response oid=0 response=b'\xf8\x80\x1f\x00V'
Receive: 63 426.944902 426.944719 13: seq: 17, spi_transfer_response oid=0 response=b'\xf8\x00\x00\x00\x00'
Receive: 64 426.949475 426.949222 13: seq: 18, spi_transfer_response oid=2 response=b'\xf8\x80\x1f\x00L'
Receive: 65 426.950638 426.950387 13: seq: 19, spi_transfer_response oid=2 response=b'\xf8\x00\x00\x00\x00'
Receive: 66 427.032666 427.032424 11: seq: 1b, clock clock=3951893020
Receive: 67 427.103357 427.032424 15: seq: 1b, analog_in_state oid=14 next_clock=4097308160 value=30268
Receive: 68 427.183339 427.116503 15: seq: 1c, analog_in_state oid=22 next_clock=4129308160 value=31050
Receive: 69 427.215369 427.116503 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4024961478
Receive: 70 427.215395 427.116503 14: seq: 1c, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=4024979686
Receive: 71 427.215666 427.215443 10: seq: 1d, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 72 427.218024 427.217783 10: seq: 1f, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 73 427.219365 427.219074 9: seq: 10, stepper_position oid=12 pos=7983
Receive: 74 427.221681 427.221369 13: seq: 12, spi_transfer_response oid=2 response=b'x\x00\x00\x02\x8c'
Receive: 75 427.223214 427.222861 10: seq: 13, stepper_position oid=6 pos=-8017
Receive: 76 427.225117 427.224837 13: seq: 15, spi_transfer_response oid=0 response=b'x\x00\x00\x02\x8c'
Receive: 77 427.226452 427.226172 14: seq: 16, endstop_state oid=4 homing=0 next_clock=4025361161 pin_value=1
Receive: 78 427.403402 427.229591 15: seq: 18, analog_in_state oid=14 next_clock=4217308160 value=30271
Receive: 79 427.483348 427.229591 14: seq: 18, analog_in_state oid=22 next_clock=4249308160 value=31051
Receive: 80 427.703399 427.229591 14: seq: 18, analog_in_state oid=14 next_clock=42340864 value=30268
Receive: 81 427.783469 427.229591 14: seq: 18, analog_in_state oid=22 next_clock=74340864 value=31051
Receive: 82 427.852496 427.852304 13: seq: 1b, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00c'
Receive: 83 427.853458 427.853268 13: seq: 1d, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 84 427.944661 427.944456 13: seq: 1f, spi_transfer_response oid=0 response=b'x\x80\x1f\x00&'
Receive: 85 427.946125 427.945902 13: seq: 11, spi_transfer_response oid=0 response=b'x\x00\x00\x00\x00'
Receive: 86 427.949904 427.949673 13: seq: 13, spi_transfer_response oid=2 response=b'x\x80\x1f\x00N'
Receive: 87 427.951412 427.951191 13: seq: 15, spi_transfer_response oid=2 response=b'x\x00\x00\x00\x00'
Receive: 88 428.003373 427.951191 14: seq: 15, analog_in_state oid=14 next_clock=162340864 value=30270
Receive: 89 428.017559 428.017258 10: seq: 16, clock clock=50876209
Receive: 90 428.083301 428.059715 14: seq: 17, analog_in_state oid=22 next_clock=194340864 value=31050
Receive: 91 428.303323 428.260699 15: seq: 1b, analog_in_state oid=14 next_clock=282340864 value=30270
Receive: 92 428.358453 428.310677 13: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=187258870
Receive: 93 428.383394 428.360600 15: seq: 1d, analog_in_state oid=22 next_clock=314340864 value=31048
Receive: 94 428.458450 428.410468 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=227258980
Receive: 95 428.558453 428.510396 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=267258988
Receive: 96 428.603366 428.560120 15: seq: 13, analog_in_state oid=14 next_clock=402340864 value=30271
Receive: 97 428.658446 428.610092 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=307258984
Receive: 98 428.683301 428.660249 15: seq: 16, analog_in_state oid=22 next_clock=434340864 value=31052
Receive: 99 428.729913 428.729438 12: seq: 18, shutdown clock=335754936 static_string_id=Command request
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=176381297650 p=5718 i=40000 c=-500 a=0
queue_step 1: t=176401297650 p=5218 i=40000 c=-500 a=0
queue_step 2: t=176421297650 p=4718 i=40000 c=-500 a=0
queue_step 3: t=176441297650 p=4218 i=40000 c=-500 a=0
queue_step 4: t=176461297650 p=3718 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=176381337661 p=-5683 i=40000 c=500 a=0
queue_step 1: t=176401337661 p=-5183 i=40000 c=500 a=0
queue_step 2: t=176421337661 p=-4683 i=40000 c=500 a=0
queue_step 3: t=176441337661 p=-4183 i=40000 c=500 a=0
queue_step 4: t=176461337661 p=-3683 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=440.728294 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 441.073535: (117.5, 92.5, 343.0834781249986)
Homing failed due to printer shutdown
Stats 429.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=17367 bytes_read=62584 bytes_retransmit=9 bytes_invalid=0 send_seq=1383 receive_seq=1383 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400008073 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=3323 bytes_read=12246 bytes_retransmit=0 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998955 adj=49998094  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.08 cputime=8.950 memavail=3327008 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 430.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=17386 bytes_read=62717 bytes_retransmit=9 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008086 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=3329 bytes_read=12262 bytes_retransmit=0 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49998077  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.07 cputime=8.959 memavail=3327104 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 431.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=17392 bytes_read=62853 bytes_retransmit=9 bytes_invalid=0 send_seq=1386 receive_seq=1386 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008074 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=3335 bytes_read=12278 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49997983  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.07 cputime=8.969 memavail=3327104 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 432.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=17398 bytes_read=62959 bytes_retransmit=9 bytes_invalid=0 send_seq=1387 receive_seq=1387 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008062 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=3341 bytes_read=12294 bytes_retransmit=0 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998953 adj=49997987  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.07 cputime=8.978 memavail=3326852 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 433.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=17404 bytes_read=63065 bytes_retransmit=9 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008055 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=3347 bytes_read=12323 bytes_retransmit=0 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998952 adj=49998008  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.07 cputime=8.987 memavail=3326852 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 434.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000003 mcu_task_stddev=0.000005 bytes_write=17410 bytes_read=63201 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008046 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=3353 bytes_read=12339 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998951 adj=49997989  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.07 cputime=8.999 memavail=3326852 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 435.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17416 bytes_read=63321 bytes_retransmit=9 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008051 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=3359 bytes_read=12355 bytes_retransmit=0 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998954 adj=49997979  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.06 cputime=9.017 memavail=3326368 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 436.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17422 bytes_read=63427 bytes_retransmit=9 bytes_invalid=0 send_seq=1391 receive_seq=1391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008055 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=3371 bytes_read=12386 bytes_retransmit=0 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998963 adj=49998021  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.06 cputime=9.035 memavail=3326368 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 437.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17428 bytes_read=63563 bytes_retransmit=9 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008059 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=3377 bytes_read=12401 bytes_retransmit=0 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998967 adj=49998123  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.06 cputime=9.055 memavail=3326368 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 438.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17434 bytes_read=63667 bytes_retransmit=9 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008067 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=3383 bytes_read=12429 bytes_retransmit=0 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998974 adj=49998139  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.06 cputime=9.073 memavail=3329392 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 439.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17440 bytes_read=63769 bytes_retransmit=9 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008071 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=3389 bytes_read=12444 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998978 adj=49998184  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.06 cputime=9.092 memavail=3329388 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 440.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17446 bytes_read=63919 bytes_retransmit=9 bytes_invalid=0 send_seq=1395 receive_seq=1395 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008076 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=3395 bytes_read=12459 bytes_retransmit=0 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998982 adj=49998185  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.06 cputime=9.110 memavail=3329388 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 441.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17452 bytes_read=64025 bytes_retransmit=9 bytes_invalid=0 send_seq=1396 receive_seq=1396 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008086 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=3401 bytes_read=12474 bytes_retransmit=0 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998985 adj=49998180  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.06 cputime=9.128 memavail=3329396 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 442.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17458 bytes_read=64146 bytes_retransmit=9 bytes_invalid=0 send_seq=1397 receive_seq=1397 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008094 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=3407 bytes_read=12490 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998991 adj=49998162  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.06 cputime=9.146 memavail=3329396 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 443.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17464 bytes_read=64267 bytes_retransmit=9 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008096 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3413 bytes_read=12519 bytes_retransmit=0 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998996 adj=49998196  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.06 cputime=9.165 memavail=3329396 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 444.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17470 bytes_read=64373 bytes_retransmit=9 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008101 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3419 bytes_read=12535 bytes_retransmit=0 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999002 adj=49998220  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.06 cputime=9.181 memavail=3329396 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 445.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17476 bytes_read=64508 bytes_retransmit=9 bytes_invalid=0 send_seq=1400 receive_seq=1400 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008101 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3425 bytes_read=12551 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999004 adj=49998231  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.05 cputime=9.199 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 446.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17482 bytes_read=64629 bytes_retransmit=9 bytes_invalid=0 send_seq=1401 receive_seq=1401 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008099 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3431 bytes_read=12567 bytes_retransmit=0 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999006 adj=49998212  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.05 cputime=9.216 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 447.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17488 bytes_read=64735 bytes_retransmit=9 bytes_invalid=0 send_seq=1402 receive_seq=1402 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008101 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3437 bytes_read=12583 bytes_retransmit=0 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999008 adj=49998190  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.05 cputime=9.234 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 448.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17494 bytes_read=64856 bytes_retransmit=9 bytes_invalid=0 send_seq=1403 receive_seq=1403 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3443 bytes_read=12612 bytes_retransmit=0 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999009 adj=49998162  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.05 cputime=9.253 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 449.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17500 bytes_read=64973 bytes_retransmit=9 bytes_invalid=0 send_seq=1404 receive_seq=1404 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008134 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3449 bytes_read=12628 bytes_retransmit=0 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999011 adj=49998083  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.272 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 450.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17506 bytes_read=65092 bytes_retransmit=9 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008133 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3455 bytes_read=12644 bytes_retransmit=0 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999013 adj=49998084  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.05 cputime=9.289 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 451.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17512 bytes_read=65213 bytes_retransmit=9 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008135 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3461 bytes_read=12660 bytes_retransmit=0 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999017 adj=49998101  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.308 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 452.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17518 bytes_read=65334 bytes_retransmit=9 bytes_invalid=0 send_seq=1407 receive_seq=1407 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008135 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3467 bytes_read=12676 bytes_retransmit=0 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999018 adj=49998132  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.326 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 453.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17524 bytes_read=65440 bytes_retransmit=9 bytes_invalid=0 send_seq=1408 receive_seq=1408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008156 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3473 bytes_read=12705 bytes_retransmit=0 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999020 adj=49998115  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.345 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 454.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17530 bytes_read=65561 bytes_retransmit=9 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008159 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3479 bytes_read=12721 bytes_retransmit=0 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999021 adj=49998067  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.363 memavail=3328656 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 455.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17536 bytes_read=65696 bytes_retransmit=9 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008160 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3485 bytes_read=12737 bytes_retransmit=0 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999022 adj=49998063  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.382 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 456.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17542 bytes_read=65802 bytes_retransmit=9 bytes_invalid=0 send_seq=1411 receive_seq=1411 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008164 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3491 bytes_read=12753 bytes_retransmit=0 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999027 adj=49998067  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.400 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 457.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17548 bytes_read=65923 bytes_retransmit=9 bytes_invalid=0 send_seq=1412 receive_seq=1412 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008169 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3497 bytes_read=12769 bytes_retransmit=0 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999025 adj=49998124  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.05 cputime=9.419 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 458.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17554 bytes_read=66044 bytes_retransmit=9 bytes_invalid=0 send_seq=1413 receive_seq=1413 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008174 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3503 bytes_read=12798 bytes_retransmit=0 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999009 adj=49998055  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.05 cputime=9.437 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Resetting prediction variance 459.048: freq=49999009 diff=-25655 stddev=3938.767
Stats 459.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17560 bytes_read=66150 bytes_retransmit=9 bytes_invalid=0 send_seq=1414 receive_seq=1414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3509 bytes_read=12814 bytes_retransmit=0 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998980 adj=49997778  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.05 cputime=9.458 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 460.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17566 bytes_read=66281 bytes_retransmit=9 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008170 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3515 bytes_read=12830 bytes_retransmit=0 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998939 adj=49997382  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.04 cputime=9.476 memavail=3328680 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 461.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17572 bytes_read=66401 bytes_retransmit=9 bytes_invalid=0 send_seq=1416 receive_seq=1416 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008170 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3521 bytes_read=12846 bytes_retransmit=0 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998889 adj=49996894  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.04 cputime=9.495 memavail=3328684 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 462.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17578 bytes_read=66507 bytes_retransmit=9 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=3527 bytes_read=12862 bytes_retransmit=0 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998826 adj=49996359  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.04 cputime=9.512 memavail=3328684 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 463.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17584 bytes_read=66628 bytes_retransmit=9 bytes_invalid=0 send_seq=1418 receive_seq=1418 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008177 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3533 bytes_read=12891 bytes_retransmit=0 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998757 adj=49995750  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.04 cputime=9.531 memavail=3328684 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 464.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17590 bytes_read=66749 bytes_retransmit=9 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008182 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3539 bytes_read=12907 bytes_retransmit=0 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998677 adj=49995173  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.549 memavail=3327940 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 465.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17596 bytes_read=66869 bytes_retransmit=9 bytes_invalid=0 send_seq=1420 receive_seq=1420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3545 bytes_read=12923 bytes_retransmit=0 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998590 adj=49994551  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.568 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 466.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17608 bytes_read=67006 bytes_retransmit=9 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008177 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3551 bytes_read=12939 bytes_retransmit=0 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998505 adj=49993966  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.04 cputime=9.587 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 467.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17614 bytes_read=67127 bytes_retransmit=9 bytes_invalid=0 send_seq=1423 receive_seq=1423 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=3557 bytes_read=12955 bytes_retransmit=0 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998404 adj=49993547  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.606 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 468.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17620 bytes_read=67233 bytes_retransmit=9 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008173 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3563 bytes_read=12984 bytes_retransmit=0 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998300 adj=49992966  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.624 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 469.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17626 bytes_read=67354 bytes_retransmit=9 bytes_invalid=0 send_seq=1425 receive_seq=1425 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008173 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3569 bytes_read=13000 bytes_retransmit=0 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998190 adj=49992444  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.642 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 470.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17632 bytes_read=67488 bytes_retransmit=9 bytes_invalid=0 send_seq=1426 receive_seq=1426 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008174 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3575 bytes_read=13016 bytes_retransmit=0 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998078 adj=49991937  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.660 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 471.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17638 bytes_read=67590 bytes_retransmit=9 bytes_invalid=0 send_seq=1427 receive_seq=1427 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008168 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3581 bytes_read=13032 bytes_retransmit=0 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997964 adj=49991483  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.04 cputime=9.679 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 472.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17644 bytes_read=67711 bytes_retransmit=9 bytes_invalid=0 send_seq=1428 receive_seq=1428 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=3587 bytes_read=13048 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997842 adj=49991099  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.04 cputime=9.697 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.4 pwm=0.000
Stats 473.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17650 bytes_read=67832 bytes_retransmit=9 bytes_invalid=0 send_seq=1429 receive_seq=1429 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008159 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3593 bytes_read=13077 bytes_retransmit=0 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997720 adj=49990664  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.04 cputime=9.716 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 474.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17656 bytes_read=67938 bytes_retransmit=9 bytes_invalid=0 send_seq=1430 receive_seq=1430 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008152 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3599 bytes_read=13093 bytes_retransmit=0 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997597 adj=49990307  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.04 cputime=9.733 memavail=3327700 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 475.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17662 bytes_read=68073 bytes_retransmit=9 bytes_invalid=0 send_seq=1431 receive_seq=1431 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008150 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3605 bytes_read=13109 bytes_retransmit=0 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997469 adj=49989988  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.04 cputime=9.751 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 476.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17668 bytes_read=68194 bytes_retransmit=9 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008152 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3611 bytes_read=13125 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997341 adj=49989630  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.03 cputime=9.769 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 477.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17674 bytes_read=68300 bytes_retransmit=9 bytes_invalid=0 send_seq=1433 receive_seq=1433 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008152 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=3617 bytes_read=13141 bytes_retransmit=0 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997212 adj=49989325  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.03 cputime=9.787 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 478.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17680 bytes_read=68421 bytes_retransmit=9 bytes_invalid=0 send_seq=1434 receive_seq=1434 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008148 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=3623 bytes_read=13170 bytes_retransmit=0 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997084 adj=49989051  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.805 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 479.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17686 bytes_read=68542 bytes_retransmit=9 bytes_invalid=0 send_seq=1435 receive_seq=1435 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008149 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=3629 bytes_read=13186 bytes_retransmit=0 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996955 adj=49988841  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.823 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 480.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17692 bytes_read=68648 bytes_retransmit=9 bytes_invalid=0 send_seq=1436 receive_seq=1436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008172 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=3635 bytes_read=13202 bytes_retransmit=0 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996827 adj=49988612  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.840 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 481.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17698 bytes_read=68781 bytes_retransmit=9 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=3641 bytes_read=13218 bytes_retransmit=0 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996701 adj=49988401  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.858 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 482.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17704 bytes_read=68899 bytes_retransmit=9 bytes_invalid=0 send_seq=1438 receive_seq=1438 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008164 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=3647 bytes_read=13234 bytes_retransmit=0 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996577 adj=49988295  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.876 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 483.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17710 bytes_read=69005 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3653 bytes_read=13263 bytes_retransmit=0 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996453 adj=49988183  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.895 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 484.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17716 bytes_read=69126 bytes_retransmit=9 bytes_invalid=0 send_seq=1440 receive_seq=1440 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3659 bytes_read=13279 bytes_retransmit=0 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996330 adj=49988086  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.03 cputime=9.913 memavail=3327464 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 485.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17722 bytes_read=69247 bytes_retransmit=9 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008164 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3665 bytes_read=13295 bytes_retransmit=0 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996210 adj=49987996  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.03 cputime=9.931 memavail=3327488 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 486.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17728 bytes_read=69367 bytes_retransmit=9 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008170 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3671 bytes_read=13311 bytes_retransmit=0 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996086 adj=49987936  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.03 cputime=9.949 memavail=3327488 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 487.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17734 bytes_read=69488 bytes_retransmit=9 bytes_invalid=0 send_seq=1443 receive_seq=1443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008171 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3677 bytes_read=13327 bytes_retransmit=0 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49995964 adj=49987783  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.03 cputime=9.967 memavail=3327488 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 488.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=17740 bytes_read=69609 bytes_retransmit=9 bytes_invalid=0 send_seq=1444 receive_seq=1444 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008165 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=3683 bytes_read=13356 bytes_retransmit=0 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49995843 adj=49987681  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.03 cputime=9.986 memavail=3327488 print_time=441.694 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 15:56:23 2023 (1690570583.8 12.5)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548189504416: New connection
webhooks client 548189504416: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000108 bytes_write=3191 bytes_read=6077 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400001366 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50007389 adj=50040307  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.95 cputime=2.018 memavail=3333748 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548189504416
webhooks: registering remote method 'reboot_machine' for connection id: 548189504416
webhooks: registering remote method 'pause_job_queue' for connection id: 548189504416
webhooks: registering remote method 'start_job_queue' for connection id: 548189504416
Stats 17.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000108 bytes_write=3197 bytes_read=6168 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400003954 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001796 adj=49994750  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.95 cputime=2.038 memavail=3365856 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 18.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000108 bytes_write=3203 bytes_read=6289 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400005820 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=825 bytes_read=4539 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000147 adj=49988289  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.95 cputime=2.048 memavail=3356912 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 19.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000108 bytes_write=3209 bytes_read=6395 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006042 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999683 adj=49988052  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.95 cputime=2.066 memavail=3331512 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 20.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000017 mcu_task_stddev=0.000108 bytes_write=3215 bytes_read=6516 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007423 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999608 adj=49989864  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.96 cputime=2.075 memavail=3333752 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 21.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3221 bytes_read=6652 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007369 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999563 adj=49991533  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.96 cputime=2.085 memavail=3344652 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 22.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3227 bytes_read=6758 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007264 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999610 adj=49993223  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.96 cputime=2.099 memavail=3342500 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 23.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3233 bytes_read=6875 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007209 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=855 bytes_read=4619 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999575 adj=49994748  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.96 cputime=2.109 memavail=3348560 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 24.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3239 bytes_read=6996 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008163 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999811 adj=49995801  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.96 cputime=2.122 memavail=3322556 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 25.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3245 bytes_read=7102 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007996 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999790 adj=49996884  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.88 cputime=2.133 memavail=3338036 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 26.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3251 bytes_read=7237 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007690 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999766 adj=49997365  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.88 cputime=2.143 memavail=3336848 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 27.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3257 bytes_read=7358 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007631 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999722 adj=49997629  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.88 cputime=2.152 memavail=3336872 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.3 pwm=0.000
Stats 28.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3263 bytes_read=7464 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007539 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=885 bytes_read=4712 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999702 adj=49997879  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.88 cputime=2.161 memavail=3337124 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 29.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3269 bytes_read=7585 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007521 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999702 adj=49998069  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.88 cputime=2.170 memavail=3336636 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 30.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3275 bytes_read=7706 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007877 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999786 adj=49998248  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.89 cputime=2.181 memavail=3336620 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 31.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3281 bytes_read=7826 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007863 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999774 adj=49998551  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.89 cputime=2.190 memavail=3337132 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 32.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3287 bytes_read=7947 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007985 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999770 adj=49998568  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.89 cputime=2.199 memavail=3337132 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 33.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3293 bytes_read=8066 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007949 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=915 bytes_read=4805 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999817 adj=49998525  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.89 cputime=2.212 memavail=3335644 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 34.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3299 bytes_read=8169 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007971 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998855  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.89 cputime=2.226 memavail=3327640 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 35.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3305 bytes_read=8290 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007954 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999848 adj=49998885  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.82 cputime=2.239 memavail=3331020 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 36.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3311 bytes_read=8425 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008062 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999862 adj=49998998  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.82 cputime=2.254 memavail=3333160 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 37.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3317 bytes_read=8531 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008122 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999852 adj=49998967  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.82 cputime=2.264 memavail=3331984 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 38.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3329 bytes_read=8668 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008049 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=945 bytes_read=4898 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999843 adj=49998832  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.82 cputime=2.274 memavail=3331312 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 39.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3335 bytes_read=8789 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007996 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999836 adj=49998835  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.82 cputime=2.284 memavail=3331064 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 40.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3341 bytes_read=8895 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007977 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999832 adj=49998835  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.75 cputime=2.293 memavail=3331064 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 41.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3347 bytes_read=9030 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008015 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999846 adj=49998822  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.75 cputime=2.307 memavail=3331064 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 42.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3353 bytes_read=9151 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008015 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999848 adj=49998890  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.75 cputime=2.322 memavail=3329028 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000000
Stats 43.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=4953 bytes_read=10288 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007947 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999851 adj=49998894  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.75 cputime=2.364 memavail=3329432 print_time=52.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 44.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5548 bytes_read=10733 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007893 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=981 bytes_read=5020 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999850 adj=49998827  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.75 cputime=2.386 memavail=3329440 print_time=53.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 45.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=6146 bytes_read=11181 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007850 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=987 bytes_read=5036 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999848 adj=49998877  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.69 cputime=2.409 memavail=3329488 print_time=54.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 46.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=6746 bytes_read=11634 bytes_retransmit=9 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007857 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=993 bytes_read=5052 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999848 adj=49998901  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.69 cputime=2.430 memavail=3329488 print_time=55.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 47.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=7346 bytes_read=12087 bytes_retransmit=9 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007909 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=999 bytes_read=5068 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999851 adj=49998882  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.69 cputime=2.463 memavail=3329488 print_time=56.999 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 48.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=8245 bytes_read=12680 bytes_retransmit=9 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007936 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1005 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998857  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.69 cputime=2.508 memavail=3328212 print_time=58.142 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 49.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=9707 bytes_read=13814 bytes_retransmit=9 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007950 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1011 bytes_read=5113 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999864 adj=49998888  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.69 cputime=2.552 memavail=3327984 print_time=59.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 50.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=10187 bytes_read=14308 bytes_retransmit=9 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007915 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1017 bytes_read=5129 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999873 adj=49998917  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.64 cputime=2.575 memavail=3327760 print_time=60.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 51.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=10684 bytes_read=14827 bytes_retransmit=9 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007929 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1023 bytes_read=5145 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49999009  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.64 cputime=2.598 memavail=3327760 print_time=61.017 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 52.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=12011 bytes_read=15422 bytes_retransmit=9 bytes_invalid=0 send_seq=725 receive_seq=725 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008001 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1029 bytes_read=5161 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49998990  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.64 cputime=2.640 memavail=3327760 print_time=62.361 buffer_time=0.548 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Stats 53.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=12176 bytes_read=15676 bytes_retransmit=9 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=400008042 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1035 bytes_read=5177 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999876 adj=49998875  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.64 cputime=2.660 memavail=3328520 print_time=62.361 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 54.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=12539 bytes_read=16107 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=400008050 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1041 bytes_read=5206 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999894 adj=49998837  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.64 cputime=2.695 memavail=3323532 print_time=64.302 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 548189504416
Received 16.898207: b'{"id": 548411919952, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 16.900827: b'{"id": 548360319760, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 16.901634: b'{"id": 548360319616, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 17.137670: b'{"id": 548360406736, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 17.137670: b'{"id": 548360406064, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 18.411158: b'{"id": 548360517280, "method": "info", "params": {}}'
Received 18.421850: b'{"id": 548360518096, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 18.662115: b'{"id": 548360427024, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "heater_fan my_nozzle_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 18.672207: b'{"id": 548360425776, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null}}}'
Received 21.739197: b'{"id": 548411787248, "method": "info", "params": {}}'
Received 21.739840: b'{"id": 548411707552, "method": "objects/list", "params": {}}'
Received 21.740542: b'{"id": 548386368672, "method": "gcode/help", "params": {}}'
Received 21.756497: b'{"id": 548411738192, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 32.783184: b'{"id": 548386378944, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 32.948409: b'{"id": 548386380240, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null}}}'
Received 32.949116: b'{"id": 548386378848, "method": "objects/list", "params": {"objects": {}}}'
Received 32.955347: b'{"id": 548386379184, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "toolhead": null, "virtual_sdcard": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 37.952487: b'{"id": 548411756352, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 42.287221: b'{"id": 548411755008, "method": "gcode/script", "params": {"script": "G28"}}'
Received 55.117093: b'{"id": 548411753088, "method": "emergency_stop", "params": {}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (51.794401691, 0.0, 0.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=25816004040 clock_est=(33.355 17203425049 400008014.900) min_half_rtt=0.000062 min_rtt_time=43.069 time_avg=33.355(214.942) clock_avg=17203425049.924(85978367901.941) pred_variance=29450274683.900
Dumping serial stats: bytes_write=13095 bytes_read=16473 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 51.398993 51.398993 13: seq: 12, queue_step oid=9 interval=25000 count=800 add=0
Sent 1 51.448730 51.448730 20: seq: 13, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=3065288625
Sent 2 51.499542 51.499542 13: seq: 14, queue_step oid=9 interval=25000 count=800 add=0
Sent 3 51.548887 51.548887 20: seq: 15, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=3105288621
Sent 4 51.599266 51.599266 13: seq: 16, queue_step oid=9 interval=25000 count=800 add=0
Sent 5 51.649590 51.649590 20: seq: 17, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=3145288621
Sent 6 51.698884 51.698884 13: seq: 18, queue_step oid=9 interval=25000 count=800 add=0
Sent 7 51.749544 51.749544 20: seq: 19, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=3185288611
Sent 8 51.773937 51.773937 8: seq: 1a, trsync_trigger oid=11 reason=3
Sent 9 51.774774 51.774774 17: seq: 1b, endstop_home oid=10 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0, trsync_trigger oid=11 reason=3
Sent 10 51.775306 51.775306 7: seq: 1c, stepper_get_position oid=9
Sent 11 51.775821 51.775821 13: seq: 1d, spi_send oid=1 data=b'j\x00\x00\x00\x00'
Sent 12 51.775860 51.775860 13: seq: 1e, spi_transfer oid=1 data=b'j\x00\x00\x00\x00'
Sent 13 51.776434 51.776434 7: seq: 1f, endstop_query_state oid=10
Sent 14 51.776935 51.776935 8: seq: 10, reset_step_clock oid=9 clock=0
Sent 15 51.777410 51.777410 21: seq: 11, spi_send oid=1 data=b'\x80\x00\x00\x00\x0c', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 16 51.777942 51.777942 21: seq: 12, spi_send oid=1 data=b'\x94\x00\x00\x00\x00', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 17 51.789410 51.789410 56: seq: 13, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=9 dir=1, set_next_step_dir oid=12 dir=1, queue_step oid=9 interval=3194359714 count=1 add=0, queue_step oid=9 interval=318030 count=1 add=0, queue_step oid=9 interval=210818 count=4 add=-27204, queue_step oid=9 interval=123907 count=8 add=-6165, queue_step oid=9 interval=79777 count=18 add=-1609
Sent 18 51.789410 51.789410 63: seq: 14, queue_step oid=6 interval=3196906826 count=1 add=0, queue_step oid=6 interval=232148 count=1 add=0, queue_step oid=12 interval=3196906826 count=1 add=0, queue_step oid=12 interval=232148 count=1 add=0, queue_step oid=6 interval=150217 count=5 add=-16395, queue_step oid=12 interval=150217 count=5 add=-16395, queue_step oid=9 interval=53203 count=34 add=-510
Sent 19 51.789410 51.789410 61: seq: 15, queue_step oid=6 interval=82148 count=12 add=-3066, queue_step oid=12 interval=82148 count=12 add=-3066, queue_step oid=6 interval=50813 count=23 add=-822, queue_step oid=12 interval=50813 count=23 add=-822, queue_step oid=9 interval=36887 count=37 add=-353, queue_step oid=6 interval=34040 count=60 add=-254, queue_step oid=12 interval=34040 count=60 add=-254
Sent 20 51.789410 51.789410 64: seq: 16, queue_step oid=9 interval=25094 count=69 add=-116, queue_step oid=6 interval=20032 count=68 add=-93, queue_step oid=12 interval=20032 count=68 add=-93, queue_step oid=9 interval=17960 count=97 add=-48, queue_step oid=6 interval=14408 count=98 add=-38, queue_step oid=12 interval=14408 count=98 add=-38, queue_step oid=9 interval=13798 count=154 add=-24
Sent 21 51.789410 51.789410 61: seq: 17, queue_step oid=6 interval=11093 count=123 add=-19, queue_step oid=12 interval=11093 count=123 add=-19, queue_step oid=6 interval=8974 count=173 add=-10, queue_step oid=12 interval=8974 count=173 add=-10, queue_step oid=9 interval=10365 count=149 add=-10, queue_step oid=6 interval=7399 count=200 add=-6, queue_step oid=12 interval=7399 count=200 add=-6, queue_step oid=9 interval=9056 count=224 add=-6
Sent 22 51.789410 51.789410 61: seq: 18, queue_step oid=6 interval=6311 count=151 add=-3, queue_step oid=12 interval=6311 count=151 add=-3, queue_step oid=9 interval=7835 count=257 add=-4, queue_step oid=6 interval=6003 count=197 add=-2, queue_step oid=12 interval=6003 count=197 add=-2, queue_step oid=6 interval=5731 count=169 add=-2, queue_step oid=12 interval=5731 count=169 add=-2, queue_step oid=9 interval=6900 count=625 add=-1
Sent 23 51.792521 51.792521 64: seq: 19, queue_step oid=6 interval=5457 count=294 add=-1, queue_step oid=12 interval=5457 count=294 add=-1, queue_step oid=6 interval=5234 count=34428 add=0, queue_step oid=12 interval=5234 count=34428 add=0, queue_step oid=9 interval=6340 count=215 add=-1, queue_step oid=9 interval=6203 count=3531 add=0, queue_step oid=9 interval=6202 count=23000 add=0, queue_step oid=9 interval=6203 count=3585 add=0
Sent 24 51.793062 51.793062 61: seq: 1a, queue_step oid=6 interval=5234 count=10037 add=0, queue_step oid=12 interval=5234 count=10037 add=0, queue_step oid=9 interval=6202 count=6466 add=0, queue_step oid=9 interval=6324 count=244 add=1, queue_step oid=9 interval=6686 count=201 add=1, queue_step oid=6 interval=5297 count=195 add=1, queue_step oid=12 interval=5297 count=195 add=1, queue_step oid=9 interval=6961 count=287 add=2
Sent 25 51.793062 51.793062 61: seq: 1b, queue_step oid=6 interval=5548 count=195 add=2, queue_step oid=12 interval=5548 count=195 add=2, queue_step oid=6 interval=5845 count=181 add=3, queue_step oid=12 interval=5845 count=181 add=3, queue_step oid=9 interval=7682 count=226 add=6, queue_step oid=6 interval=6265 count=185 add=4, queue_step oid=12 interval=6265 count=185 add=4, queue_step oid=6 interval=7147 count=170 add=7
Sent 26 51.793062 51.793062 62: seq: 1c, queue_step oid=12 interval=7147 count=170 add=7, queue_step oid=9 interval=9201 count=166 add=10, queue_step oid=6 interval=8484 count=147 add=13, queue_step oid=12 interval=8484 count=147 add=13, queue_step oid=9 interval=11069 count=118 add=19, queue_step oid=6 interval=10626 count=109 add=27, queue_step oid=12 interval=10626 count=109 add=27, queue_step oid=9 interval=13684 count=136 add=49
Sent 27 51.793062 51.793062 59: seq: 1d, queue_step oid=6 interval=13984 count=74 add=66, queue_step oid=12 interval=13984 count=74 add=66, queue_step oid=6 interval=19758 count=42 add=205, queue_step oid=12 interval=19758 count=42 add=205, queue_step oid=9 interval=20911 count=62 add=125, queue_step oid=6 interval=30636 count=39 add=532, queue_step oid=12 interval=30636 count=39 add=532
Sent 28 51.793062 51.793062 62: seq: 1e, queue_step oid=9 interval=29915 count=32 add=367, queue_step oid=6 interval=54525 count=13 add=1795, queue_step oid=12 interval=54525 count=13 add=1795, queue_step oid=9 interval=43223 count=36 add=1209, queue_step oid=6 interval=78847 count=7 add=7977, queue_step oid=12 interval=78847 count=7 add=7977, queue_step oid=6 interval=156980 count=2 add=29623
Sent 29 51.793062 51.793062 59: seq: 1f, queue_step oid=12 interval=156980 count=2 add=29623, queue_step oid=6 interval=272414 count=1 add=0, queue_step oid=12 interval=272414 count=1 add=0, queue_step oid=9 interval=92031 count=10 add=3531, queue_step oid=9 interval=137433 count=5 add=13011, queue_step oid=9 interval=231084 count=1 add=0, queue_step oid=9 interval=277470 count=1 add=0
Sent 30 51.931245 51.931245 64: seq: 10, get_clock, queue_step oid=9 interval=403006 count=1 add=0, queue_digital_out oid=18 clock=3469403965 on_ticks=590000, trsync_start oid=5 report_clock=3781403965 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=3881403965, endstop_home oid=4 clock=3781403965 sample_ticks=6000 sample_count=4 rest_ticks=400000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 31 52.115048 52.115048 13: seq: 11, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 32 52.115133 52.115133 13: seq: 12, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 33 52.115739 52.115739 13: seq: 13, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 34 52.115781 52.115781 13: seq: 14, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 35 52.317704 52.317704 13: seq: 15, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 36 52.317769 52.317769 13: seq: 16, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 37 52.317925 52.317925 13: seq: 17, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 38 52.317998 52.317998 13: seq: 18, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 39 52.318371 52.318371 13: seq: 19, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 40 52.318621 52.318621 13: seq: 1a, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 41 52.318845 52.318845 21: seq: 1b, spi_send oid=2 data=b'\x01\x00\x00\x00\x00', spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 42 52.916427 52.916427 14: seq: 1c, get_clock, queue_digital_out oid=18 clock=3701403964 on_ticks=0
Sent 43 53.115560 53.115560 13: seq: 1d, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 44 53.115665 53.115665 13: seq: 1e, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 45 53.116690 53.116690 13: seq: 1f, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 46 53.116777 53.116777 13: seq: 10, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 47 53.290390 53.290390 15: seq: 11, queue_digital_out oid=18 clock=3741403965 on_ticks=466000
Sent 48 53.318727 53.318727 13: seq: 12, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 49 53.318859 53.318859 13: seq: 13, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 50 53.319083 53.319083 13: seq: 14, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 51 53.319125 53.319125 13: seq: 15, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 52 53.319967 53.319967 13: seq: 16, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 53 53.320323 53.320323 13: seq: 17, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 54 53.320905 53.320905 13: seq: 18, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 55 53.320971 53.320971 13: seq: 19, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 56 53.390352 53.390352 13: seq: 1a, queue_digital_out oid=18 clock=3781403965 on_ticks=0
Sent 57 53.488160 53.488160 8: seq: 1b, trsync_trigger oid=5 reason=3
Sent 58 53.488419 53.488419 14: seq: 1c, endstop_home oid=4 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 59 53.490298 53.490298 8: seq: 1d, trsync_trigger oid=5 reason=3
Sent 60 53.497726 53.497726 7: seq: 1e, stepper_get_position oid=12
Sent 61 53.499044 53.499044 21: seq: 1f, spi_send oid=2 data=b'j\x00\x00\x00\x00', spi_transfer oid=2 data=b'j\x00\x00\x00\x00'
Sent 62 53.499888 53.499888 7: seq: 10, stepper_get_position oid=6
Sent 63 53.500761 53.500761 13: seq: 11, spi_send oid=0 data=b'j\x00\x00\x00\x00'
Sent 64 53.500850 53.500850 13: seq: 12, spi_transfer oid=0 data=b'j\x00\x00\x00\x00'
Sent 65 53.501849 53.501849 7: seq: 13, endstop_query_state oid=4
Sent 66 53.502587 53.502587 11: seq: 14, reset_step_clock oid=6 clock=0, reset_step_clock oid=12 clock=0
Sent 67 53.505724 53.505724 56: seq: 15, queue_digital_out oid=18 clock=3887630496 on_ticks=260000, trsync_start oid=5 report_clock=4239656111 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=44688815, endstop_home oid=4 clock=4239656111 sample_ticks=6000 sample_count=4 rest_ticks=40000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 68 53.901549 53.901549 14: seq: 16, get_clock, queue_digital_out oid=18 clock=4119630495 on_ticks=0
Sent 69 54.116555 54.116555 13: seq: 17, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 70 54.116644 54.116644 13: seq: 18, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 71 54.117358 54.117358 13: seq: 19, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 72 54.117404 54.117404 13: seq: 1a, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 73 54.319255 54.319255 13: seq: 1b, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 74 54.319336 54.319336 13: seq: 1c, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 75 54.319477 54.319477 21: seq: 1d, spi_send oid=2 data=b'o\x00\x00\x00\x00', spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 76 54.320115 54.320115 13: seq: 1e, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 77 54.320157 54.320157 13: seq: 1f, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 78 54.320251 54.320251 13: seq: 10, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 79 54.320288 54.320288 13: seq: 11, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 80 54.335629 54.335629 15: seq: 12, queue_digital_out oid=18 clock=4159630496 on_ticks=466000
Sent 81 54.435836 54.435836 13: seq: 13, queue_digital_out oid=18 clock=4199630496 on_ticks=0
Sent 82 54.484474 54.484474 27: seq: 14, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=12 dir=0, queue_step oid=6 interval=4246456111 count=1 add=0, queue_step oid=12 interval=4246456111 count=1 add=0
Sent 83 54.534382 54.534382 63: seq: 15, queue_step oid=6 interval=292820 count=1 add=0, queue_step oid=12 interval=292820 count=1 add=0, queue_step oid=6 interval=191755 count=4 add=-22695, queue_step oid=12 interval=191755 count=4 add=-22695, queue_step oid=6 interval=109997 count=10 add=-4471, queue_step oid=12 interval=109997 count=10 add=-4471, queue_step oid=6 interval=68108 count=22 add=-1144
Sent 84 54.534382 54.534382 45: seq: 16, queue_step oid=12 interval=68108 count=22 add=-1144, queue_step oid=6 interval=44843 count=25 add=-286, queue_step oid=12 interval=44843 count=25 add=-286, queue_step oid=6 interval=40011 count=736 add=0, queue_step oid=12 interval=40011 count=737 add=0
Sent 85 54.584723 54.584723 21: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 86 54.634044 54.634044 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 87 54.684394 54.684394 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 88 54.734771 54.734771 27: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=84689206
Sent 89 54.784521 54.784521 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 90 54.834882 54.834882 27: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=124689220
Sent 91 54.884295 54.884295 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 92 54.886458 54.886458 6: seq: 1e, get_clock
Sent 93 54.934774 54.934774 27: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=164689210
Sent 94 54.984124 54.984124 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 95 55.034802 55.034802 28: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=204689214
Sent 96 55.084163 55.084163 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 97 55.117429 55.117429 13: seq: 13, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 98 55.117525 55.117525 13: seq: 14, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 99 55.119071 55.119071 6: seq: 15, emergency_stop
Dumping receive queue 100 messages
Receive: 0 50.393824 50.349013 15: seq: 10, analog_in_state oid=14 next_clock=2661163520 value=30478
Receive: 1 50.446973 50.399314 14: seq: 11, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2565288621
Receive: 2 50.473841 50.449648 15: seq: 12, analog_in_state oid=22 next_clock=2693163520 value=31070
Receive: 3 50.546984 50.499780 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2605288611
Receive: 4 50.646961 50.599419 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2645288621
Receive: 5 50.693823 50.648695 15: seq: 16, analog_in_state oid=14 next_clock=2781163520 value=30479
Receive: 6 50.747045 50.698973 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2685288621
Receive: 7 50.747074 50.698973 15: seq: 17, stats count=659 sum=1060903 sumsq=17629469
Receive: 8 50.773856 50.749602 15: seq: 18, analog_in_state oid=22 next_clock=2813163520 value=31069
Receive: 9 50.847005 50.798981 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2725288611
Receive: 10 50.947031 50.899611 14: seq: 1b, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2765288621
Receive: 11 50.947053 50.946847 11: seq: 1c, clock clock=2765301897
Receive: 12 50.993864 50.950399 15: seq: 1e, analog_in_state oid=14 next_clock=2901163520 value=30481
Receive: 13 51.047003 50.998988 14: seq: 1f, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2805288623
Receive: 14 51.073807 51.049383 15: seq: 10, analog_in_state oid=22 next_clock=2933163520 value=31070
Receive: 15 51.114193 51.114050 13: seq: 13, spi_transfer_response oid=1 response=b'p\x00\x1f\x006'
Receive: 16 51.114801 51.114589 13: seq: 15, spi_transfer_response oid=1 response=b'0\x00\x00\x00\x00'
Receive: 17 51.146966 51.114589 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2845288611
Receive: 18 51.247012 51.198950 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2885288621
Receive: 19 51.293853 51.248917 15: seq: 18, analog_in_state oid=14 next_clock=3021163520 value=30478
Receive: 20 51.316924 51.316790 13: seq: 1b, spi_transfer_response oid=0 response=b'<\x81\x1f\x00*'
Receive: 21 51.317304 51.317166 13: seq: 1d, spi_transfer_response oid=2 response=b'<\x81\x1f\x00%'
Receive: 22 51.317790 51.317582 13: seq: 1f, spi_transfer_response oid=0 response=b'<\x00\x00\x00\x00'
Receive: 23 51.318091 51.317938 13: seq: 11, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 24 51.346962 51.317938 14: seq: 11, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2925288623
Receive: 25 51.373796 51.349665 15: seq: 12, analog_in_state oid=22 next_clock=3053163520 value=31069
Receive: 26 51.446964 51.398993 14: seq: 13, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=2965288625
Receive: 27 51.546952 51.499542 14: seq: 15, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3005288621
Receive: 28 51.593871 51.548887 15: seq: 16, analog_in_state oid=14 next_clock=3141163520 value=30478
Receive: 29 51.646948 51.599266 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3045288621
Receive: 30 51.673841 51.649590 15: seq: 18, analog_in_state oid=22 next_clock=3173163520 value=31071
Receive: 31 51.746997 51.698884 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3085288611
Receive: 32 51.773903 51.749544 14: seq: 1a, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=3096031665
Receive: 33 51.774081 51.773937 10: seq: 1b, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 34 51.774931 51.774774 10: seq: 1c, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 35 51.775442 51.775306 10: seq: 1d, stepper_position oid=9 pos=-40130
Receive: 36 51.775997 51.775860 13: seq: 1f, spi_transfer_response oid=1 response=b'4\x00\x00\x03\n'
Receive: 37 51.776575 51.776434 14: seq: 10, endstop_state oid=10 homing=0 next_clock=3096038157 pin_value=0
Receive: 38 51.777566 51.777410 13: seq: 12, spi_transfer_response oid=1 response=b'4\x00\x00\x00\x0c'
Receive: 39 51.778103 51.777942 13: seq: 13, spi_transfer_response oid=1 response=b'4\x00\x00\x00\x00'
Receive: 40 51.893832 51.793062 15: seq: 10, analog_in_state oid=14 next_clock=3261163520 value=30480
Receive: 41 51.931450 51.931245 11: seq: 11, clock clock=3159085201
Receive: 42 51.973840 51.931245 15: seq: 11, analog_in_state oid=22 next_clock=3293163520 value=31067
Receive: 43 52.115291 52.115133 13: seq: 13, spi_transfer_response oid=1 response=b'\xb0\x00\x1f\x01\x17'
Receive: 44 52.115980 52.115781 13: seq: 15, spi_transfer_response oid=1 response=b'\xb0\x00\x00\x00\x00'
Receive: 45 52.193830 52.115781 15: seq: 15, analog_in_state oid=14 next_clock=3381163520 value=30485
Receive: 46 52.273835 52.115781 15: seq: 15, analog_in_state oid=22 next_clock=3413163520 value=31073
Receive: 47 52.318006 52.317769 13: seq: 17, spi_transfer_response oid=0 response=b'\xf0\x00\x1f\x00\x8e'
Receive: 48 52.318379 52.317998 13: seq: 19, spi_transfer_response oid=2 response=b'\xb0\x00\x1f\x00\x96'
Receive: 49 52.318853 52.318621 13: seq: 1b, spi_transfer_response oid=0 response=b'\xf0\x00\x00\x00\x00'
Receive: 50 52.319181 52.318845 13: seq: 1c, spi_transfer_response oid=2 response=b'\xb0\x00\x00\x00\x00'
Receive: 51 52.493896 52.318845 15: seq: 1c, analog_in_state oid=14 next_clock=3501163520 value=30483
Receive: 52 52.573861 52.318845 15: seq: 1c, analog_in_state oid=22 next_clock=3533163520 value=31077
Receive: 53 52.793903 52.318845 15: seq: 1c, analog_in_state oid=14 next_clock=3621163520 value=30482
Receive: 54 52.873972 52.318845 15: seq: 1c, analog_in_state oid=22 next_clock=3653163520 value=31070
Receive: 55 52.916707 52.916427 11: seq: 1d, clock clock=3553160233
Receive: 56 53.093919 52.916427 15: seq: 1d, analog_in_state oid=14 next_clock=3741163520 value=30481
Receive: 57 53.115855 53.115665 13: seq: 1f, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00c'
Receive: 58 53.116943 53.116777 13: seq: 11, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 59 53.173859 53.116777 15: seq: 11, analog_in_state oid=22 next_clock=3773163520 value=31070
Receive: 60 53.319138 53.318859 13: seq: 14, spi_transfer_response oid=0 response=b'\xbc\x81\x1f\x008'
Receive: 61 53.319751 53.319125 13: seq: 16, spi_transfer_response oid=2 response=b'\xbc\x81\x1f\x00b'
Receive: 62 53.320523 53.320323 13: seq: 18, spi_transfer_response oid=0 response=b'\xbc\x00\x00\x00\x00'
Receive: 63 53.321199 53.320971 13: seq: 1a, spi_transfer_response oid=2 response=b'\xbc\x00\x00\x00\x00'
Receive: 64 53.393866 53.390352 15: seq: 1b, analog_in_state oid=14 next_clock=3861163520 value=30484
Receive: 65 53.473890 53.390352 15: seq: 1b, analog_in_state oid=22 next_clock=3893163520 value=31071
Receive: 66 53.487400 53.390352 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3781404313
Receive: 67 53.487742 53.390352 14: seq: 1b, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=3781422500
Receive: 68 53.488444 53.488160 10: seq: 1c, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 69 53.490600 53.490298 10: seq: 1e, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 70 53.498018 53.497726 9: seq: 1f, stepper_position oid=12 pos=1540
Receive: 71 53.499238 53.499044 13: seq: 10, spi_transfer_response oid=2 response=b'<\x00\x00\x03\xe4'
Receive: 72 53.500183 53.499888 10: seq: 11, stepper_position oid=6 pos=-6460
Receive: 73 53.501006 53.500850 13: seq: 13, spi_transfer_response oid=0 response=b'<\x00\x00\x01\xe4'
Receive: 74 53.502040 53.501849 14: seq: 14, endstop_state oid=4 homing=0 next_clock=3781803965 pin_value=1
Receive: 75 53.693854 53.505724 15: seq: 16, analog_in_state oid=14 next_clock=3981163520 value=30482
Receive: 76 53.773847 53.505724 15: seq: 16, analog_in_state oid=22 next_clock=4013163520 value=31069
Receive: 77 53.901734 53.901549 11: seq: 17, clock clock=3947209365
Receive: 78 53.993843 53.901549 15: seq: 17, analog_in_state oid=14 next_clock=4101163520 value=30484
Receive: 79 54.073824 53.901549 15: seq: 17, analog_in_state oid=22 next_clock=4133163520 value=31068
Receive: 80 54.116813 54.116644 13: seq: 19, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00s'
Receive: 81 54.117557 54.117404 13: seq: 1b, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 82 54.293790 54.117404 15: seq: 1b, analog_in_state oid=14 next_clock=4221163520 value=30483
Receive: 83 54.319485 54.319336 13: seq: 1d, spi_transfer_response oid=0 response=b'<\x81\x1f\x00X'
Receive: 84 54.319689 54.319477 13: seq: 1e, spi_transfer_response oid=2 response=b'<\x81\x1f\x00l'
Receive: 85 54.320294 54.320157 13: seq: 10, spi_transfer_response oid=0 response=b'<\x00\x00\x00\x00'
Receive: 86 54.320542 54.320288 13: seq: 12, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 87 54.373734 54.335629 14: seq: 13, analog_in_state oid=22 next_clock=4253163520 value=31068
Receive: 88 54.593732 54.584723 14: seq: 18, analog_in_state oid=14 next_clock=46196224 value=30483
Receive: 89 54.632803 54.584723 13: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4239656435
Receive: 90 54.673734 54.634044 14: seq: 19, analog_in_state oid=22 next_clock=78196224 value=31067
Receive: 91 54.732853 54.684394 13: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4279656502
Receive: 92 54.832806 54.784521 13: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=24689220
Receive: 93 54.886584 54.886458 10: seq: 1f, clock clock=46200264
Receive: 94 54.893715 54.886458 14: seq: 1f, analog_in_state oid=14 next_clock=166196224 value=30476
Receive: 95 54.932811 54.886458 13: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=64689210
Receive: 96 54.973717 54.934774 14: seq: 10, analog_in_state oid=22 next_clock=198196224 value=31068
Receive: 97 55.032840 54.984124 13: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=104689214
Receive: 98 55.117670 55.117525 13: seq: 15, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00\\'
Receive: 99 55.119465 55.119071 11: seq: 16, shutdown clock=139264094 static_string_id=Command request
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=2320008499 clock_est=(33.118 1255888693 49999893.814) min_half_rtt=0.000057 min_rtt_time=26.834 time_avg=33.118(205.728) clock_avg=1255888693.926(10286361946.093) pred_variance=544737718.673 clock_adj=(17.653 49999001.000)
Dumping serial stats: bytes_write=1053 bytes_read=5234 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 14.537018 14.537018 9: seq: 13, identify offset=1400 count=40
Sent 1 14.537500 14.537500 9: seq: 14, identify offset=1440 count=40
Sent 2 14.537999 14.537999 9: seq: 15, identify offset=1480 count=40
Sent 3 14.538586 14.538586 9: seq: 16, identify offset=1520 count=40
Sent 4 14.539519 14.539519 9: seq: 17, identify offset=1560 count=40
Sent 5 14.540529 14.540529 9: seq: 18, identify offset=1600 count=40
Sent 6 14.541294 14.541294 9: seq: 19, identify offset=1640 count=40
Sent 7 14.541895 14.541895 9: seq: 1a, identify offset=1680 count=40
Sent 8 14.542290 14.542290 9: seq: 1b, identify offset=1720 count=40
Sent 9 14.542650 14.542650 9: seq: 1c, identify offset=1760 count=40
Sent 10 14.543001 14.543001 9: seq: 1d, identify offset=1800 count=40
Sent 11 14.543351 14.543351 9: seq: 1e, identify offset=1840 count=40
Sent 12 14.544054 14.544054 9: seq: 1f, identify offset=1880 count=40
Sent 13 14.544910 14.544910 9: seq: 10, identify offset=1920 count=40
Sent 14 14.545867 14.545867 9: seq: 11, identify offset=1960 count=40
Sent 15 14.546510 14.546510 9: seq: 12, identify offset=2000 count=40
Sent 16 14.546970 14.546970 9: seq: 13, identify offset=2040 count=40
Sent 17 14.547407 14.547407 9: seq: 14, identify offset=2080 count=40
Sent 18 14.547819 14.547819 9: seq: 15, identify offset=2120 count=40
Sent 19 14.548766 14.548766 9: seq: 16, identify offset=2160 count=40
Sent 20 14.549520 14.549520 9: seq: 17, identify offset=2200 count=40
Sent 21 14.550085 14.550085 9: seq: 18, identify offset=2240 count=40
Sent 22 14.550787 14.550787 9: seq: 19, identify offset=2280 count=40
Sent 23 14.551400 14.551400 9: seq: 1a, identify offset=2320 count=40
Sent 24 14.551971 14.551971 9: seq: 1b, identify offset=2360 count=40
Sent 25 14.552580 14.552580 9: seq: 1c, identify offset=2400 count=40
Sent 26 14.553116 14.553116 9: seq: 1d, identify offset=2440 count=40
Sent 27 14.553642 14.553642 9: seq: 1e, identify offset=2480 count=40
Sent 28 14.554164 14.554164 9: seq: 1f, identify offset=2520 count=40
Sent 29 14.554752 14.554752 9: seq: 10, identify offset=2560 count=40
Sent 30 14.555349 14.555349 9: seq: 11, identify offset=2600 count=40
Sent 31 14.555865 14.555865 9: seq: 12, identify offset=2640 count=40
Sent 32 14.556331 14.556331 9: seq: 13, identify offset=2680 count=40
Sent 33 14.557472 14.557472 9: seq: 14, identify offset=2720 count=40
Sent 34 14.557925 14.557925 9: seq: 15, identify offset=2760 count=40
Sent 35 14.558363 14.558363 9: seq: 16, identify offset=2800 count=40
Sent 36 14.558768 14.558768 9: seq: 17, identify offset=2840 count=40
Sent 37 14.559170 14.559170 9: seq: 18, identify offset=2880 count=40
Sent 38 14.559569 14.559569 9: seq: 19, identify offset=2920 count=40
Sent 39 14.560245 14.560245 9: seq: 1a, identify offset=2960 count=40
Sent 40 14.560859 14.560859 9: seq: 1b, identify offset=3000 count=40
Sent 41 14.561480 14.561480 9: seq: 1c, identify offset=3040 count=40
Sent 42 14.562046 14.562046 9: seq: 1d, identify offset=3080 count=40
Sent 43 14.562514 14.562514 9: seq: 1e, identify offset=3120 count=40
Sent 44 14.562923 14.562923 9: seq: 1f, identify offset=3137 count=40
Sent 45 14.606592 14.606592 6: seq: 10, get_uptime
Sent 46 14.657831 14.657831 6: seq: 11, get_clock
Sent 47 14.708722 14.708722 6: seq: 12, get_clock
Sent 48 14.759635 14.759635 6: seq: 13, get_clock
Sent 49 14.810590 14.810590 6: seq: 14, get_clock
Sent 50 14.862031 14.862031 6: seq: 15, get_clock
Sent 51 14.913781 14.913781 6: seq: 16, get_clock
Sent 52 14.966280 14.966280 6: seq: 17, get_clock
Sent 53 15.017195 15.017195 6: seq: 18, get_clock
Sent 54 15.019290 15.019290 6: seq: 19, get_clock
Sent 55 15.036067 15.036067 6: seq: 1a, get_config
Sent 56 15.037291 15.037291 7: seq: 1b, allocate_oids count=0
Sent 57 15.037456 15.037456 11: seq: 1c, finalize_config crc=3912464276
Sent 58 15.037721 15.037721 6: seq: 1d, get_config
Sent 59 16.003857 16.003857 6: seq: 1e, get_clock
Sent 60 16.988235 16.988235 6: seq: 1f, get_clock
Sent 61 17.972794 17.972794 6: seq: 10, get_clock
Sent 62 18.957772 18.957772 6: seq: 11, get_clock
Sent 63 19.942136 19.942136 6: seq: 12, get_clock
Sent 64 20.926649 20.926649 6: seq: 13, get_clock
Sent 65 21.910751 21.910751 6: seq: 14, get_clock
Sent 66 22.895085 22.895085 6: seq: 15, get_clock
Sent 67 23.879939 23.879939 6: seq: 16, get_clock
Sent 68 24.864736 24.864736 6: seq: 17, get_clock
Sent 69 25.848947 25.848947 6: seq: 18, get_clock
Sent 70 26.833784 26.833784 6: seq: 19, get_clock
Sent 71 27.818778 27.818778 6: seq: 1a, get_clock
Sent 72 28.802870 28.802870 6: seq: 1b, get_clock
Sent 73 29.787223 29.787223 6: seq: 1c, get_clock
Sent 74 30.772176 30.772176 6: seq: 1d, get_clock
Sent 75 31.756888 31.756888 6: seq: 1e, get_clock
Sent 76 32.741072 32.741072 6: seq: 1f, get_clock
Sent 77 33.725709 33.725709 6: seq: 10, get_clock
Sent 78 34.710566 34.710566 6: seq: 11, get_clock
Sent 79 35.694848 35.694848 6: seq: 12, get_clock
Sent 80 36.679336 36.679336 6: seq: 13, get_clock
Sent 81 37.663808 37.663808 6: seq: 14, get_clock
Sent 82 38.648536 38.648536 6: seq: 15, get_clock
Sent 83 39.632872 39.632872 6: seq: 16, get_clock
Sent 84 40.617660 40.617660 6: seq: 17, get_clock
Sent 85 41.602672 41.602672 6: seq: 18, get_clock
Sent 86 42.586980 42.586980 6: seq: 19, get_clock
Sent 87 43.571657 43.571657 6: seq: 1a, get_clock
Sent 88 44.555823 44.555823 6: seq: 1b, get_clock
Sent 89 45.539932 45.539932 6: seq: 1c, get_clock
Sent 90 46.524451 46.524451 6: seq: 1d, get_clock
Sent 91 47.509210 47.509210 6: seq: 1e, get_clock
Sent 92 48.493662 48.493662 6: seq: 1f, get_clock
Sent 93 49.478092 49.478092 6: seq: 10, get_clock
Sent 94 50.462825 50.462825 6: seq: 11, get_clock
Sent 95 51.447169 51.447169 6: seq: 12, get_clock
Sent 96 52.431682 52.431682 6: seq: 13, get_clock
Sent 97 53.416057 53.416057 6: seq: 14, get_clock
Sent 98 54.400106 54.400106 6: seq: 15, get_clock
Sent 99 55.119169 55.119169 6: seq: 16, emergency_stop
Dumping receive queue 100 messages
Receive: 0 14.541464 14.541294 49: seq: 1a, identify_response offset=1640 data=b'\xac=P\xa2\xd8\xf84\xf3\x8eP\xee(e\x08\xe38\x0ev\xa0\x90\x85LW\xc9\xbaR\xa9\xdcX\xf3t\x15Fw\xa0c\x9aJk\x14'
Receive: 1 14.542002 14.541895 49: seq: 1b, identify_response offset=1680 data=b'\x0c+~\xbf\xd2Z\xa5\xf6\xa3\xa9PM\x81F\xfa\x93\x91\x9aL\xc3\xc8\x9f\x8c\xd5\xe4\xda\x88\x86&\x135\x19\xae\xa2\xc4\x9fMi6\xda'
Receive: 2 14.542381 14.542290 49: seq: 1c, identify_response offset=1720 data=b'\xcc\xb6\xcah\xd6^\t\xcd\xaei\x16\xfc\x9c9+\xa4)\x02\xfd\xc4\x00\x85U.*m\x99LY\xf0\x9eR5j\xc1\\\xd55\xd3\x06'
Receive: 3 14.542735 14.542650 49: seq: 1d, identify_response offset=1760 data=b'h"\x93d\xcd$Gv,\xee9\x96\x89\x98\x92q?\xf2P{\xea\xaaF\x0f\xf6\xc4L\xb5RQX\xbd.Z\xd6v#\x03W\xc6'
Receive: 4 14.543088 14.543001 49: seq: 1e, identify_response offset=1800 data=b'0\x1c0\xb8\t"f\x8a\x98=\x1c\x05\x8c\xc9\xb3H\xd6\x83o\x04\x16)n\x03\xedW#\xc6I\xa8\xa7\x0f\xb0*\xec^\x8cLHV'
Receive: 5 14.543438 14.543351 49: seq: 1f, identify_response offset=1840 data=b'\xe8\xbd\xa8{@U\x94F\x96\x88\x8a^\x89j=\x9aUi\x82J\xb5`;\xde2S`[zH%\xae\xa9]\xc9\xfab\x90\x00R'
Receive: 6 14.544202 14.544054 49: seq: 10, identify_response offset=1880 data=b'\xbd,UF\x19\xc0\xc0!E\x91\xa3jZ^wS]\xd1\xb9\x94\xeb}u\x1bn\xbe\x87T\x14\xd9\x02\xe2\xf1\x88\x03\xeaI|\x11*'
Receive: 7 14.545062 14.544910 49: seq: 11, identify_response offset=1920 data=b'\xfb\x1a<f\x05\x19\x8f\x18\xbf\xa1,\xf2\x0b\xc9\x9ai\xe4\x8f\x96\x0e\xc4`\xf0\xe67\x8b\xedH\x03\x81\xf0#\xbb\x012\x94J\x8b\xa6\xa7'
Receive: 8 14.546006 14.545867 49: seq: 12, identify_response offset=1960 data=b'\xad\x19U\x8aXE\xbc\xc6\xc33\x08}#\xd6\xe1M\x07lt\xad\xd0\xc1G\xe3a\xa6Jx\x10\x18\xc9\x8d2:ujW\xc0o\\'
Receive: 9 14.546616 14.546510 49: seq: 13, identify_response offset=2000 data=b'a\xbe5%\x1d?tC\xc9m/\x86\xe9n1\xf5\xe2~|\xf7\xe6-C\xc3e\xa0\xcc\x02\xd0P\x0e{H\x01+*b\xdePJ'
Receive: 10 14.547074 14.546970 49: seq: 14, identify_response offset=2040 data=b'\xeb\xad\x8b}H&\xaa\x0bL\x14\xb5\xdc:\xd0%\xd5\x99\xd6\\P\x03\xef3\xa4J\xcb\x91\x12\xeeb,@ _}\xfb\x15u\xb0\x0c'
Receive: 11 14.547495 14.547407 49: seq: 15, identify_response offset=2080 data=b'\x91i\xd3\xba\xae1%\xa6T\xd6\x18,{\x94\xd4\x9f\x034\xd4-\xb0\x1d\xc8j\xa93c\x80M\x07\x96\xa5\xd5\x8ba\xfb\x10\xa3\xa8\x03'
Receive: 12 14.547905 14.547819 49: seq: 16, identify_response offset=2120 data=b'\xdbf\xa3m/R\x96u\x02\xd7\x15\xa5\xdd?\xf6\x18\x00\x8b`\xe4\xe7\xb0WbfM\xcbQ[:\x03i\xa9HN\xf9\xe3\x12\xcb\x80'
Receive: 13 14.548880 14.548766 49: seq: 17, identify_response offset=2160 data=b'\xbc\xbd\xb1\xa9g\x82}\xb4\x9e\xcd\xeb\xf2G]#\xed\x9cxB\x9a\x957\x1e\x0e6\tn\x8aG\xd4\xdd\x8d\x9175\xe8n\xa0</'
Receive: 14 14.549645 14.549520 49: seq: 18, identify_response offset=2200 data=b"\x0e\x9c\xf1\xb6\x84\xf4\xd0\x18(\xf0r#\xa4\xe4\xb0%\x94\x9a\xd5T\xa3\xbe\x011f\xe5L'*\xca\x18\xf8=\xc7\x8b\xc2\x84\xfcy\x82"
Receive: 15 14.550239 14.550085 49: seq: 19, identify_response offset=2240 data=b'c1T\xcaCil\xecO=\x8fm\xe4\xa2\x91\xf1\xb1\xe2\x06\xafR\x952\x0cF\xc3\xbe\xee\x1e\xa8x\xfa\x95\xeb\x05`)4\xa0A'
Receive: 16 14.550929 14.550787 49: seq: 1a, identify_response offset=2280 data=b'Y\x1cx\xd3\xbe@\x9f\x82\xcd\x8b[\x8bp\xc27{\x10\xe0\x97\xf9c\xc9\x01\xea\xb7])\x17u\x943\x96>C\x85\x15\x97GeN'
Receive: 17 14.551530 14.551400 49: seq: 1b, identify_response offset=2320 data=b'\xfc\x19\nL\x12o\xf9\xa8\xefD\xb1\x8d\x18\xa2\x99\x1a3gl\x01\xcfb\xed\x1a\x1bA\xb0\x98\xf2\xbb\xca\x9d\xf9\x0f)\xb7\xda\x11\x8f]'
Receive: 18 14.552129 14.551971 49: seq: 1c, identify_response offset=2360 data=b'\xc7\xf6\x85\x92\t\xc9\x03\xfb^\xef}\x15\xd1~O\xb5\xa0\xa9M\xfc^I\x11)\xc1-I\xae\xfax\xef\xe1\x0bt\xff\t{E\xdaw'
Receive: 19 14.552703 14.552580 49: seq: 1d, identify_response offset=2400 data=b'Hz\x14\xb2\x10\xd4X\x0b\xc1L\xffC[\xdca4\xea\xb4"+i\x10\x06\xb5\xba\x1c\x02h\x02\\,\xae\x00\t\xd3XSC\xc7\x81'
Receive: 20 14.553237 14.553116 49: seq: 1e, identify_response offset=2440 data=b"\x95\xc7Y\xfa.j\xa2.\x90\x8a\xaat\xe0\xd5)X\xc7\x02\x1b\x89\rn\xb29\xc1u'\xa52i\t\xf69\x02\xed\xe5\xd4\xdeZ`"
Receive: 21 14.553755 14.553642 49: seq: 1f, identify_response offset=2480 data=b"\xa1\xa2\x9d\xa0e'hNv\xf4\xca\xe4\xc0*\x1a\xcdX\x89|0\x86\xdf\xdbwoTaG\x9d\xadS\x98\xec9&\ri\xba\x04\xb6"
Receive: 22 14.554292 14.554164 49: seq: 10, identify_response offset=2520 data=b']\xfb\xf2\x0e#\x8f\xb2\xbd\x05\x173&\xb5\x034R\xd3\xfe*\x9d\xdd!5\xf5p\xe9^PkZ\xc3\x080;\x03\xdc\xaez\xb9\xcc'
Receive: 23 14.554892 14.554752 49: seq: 11, identify_response offset=2560 data=b'\xcb\xe3\xd4~\x04\xe5\x83T\xa5\xa2\x071o^:\x00pC^O\x07Yt\xeaPlIVJ\xa6*\x8ed5\x7f!\x81\xf3\xd4\x90'
Receive: 24 14.555480 14.555349 49: seq: 12, identify_response offset=2600 data=b'\xc7\xdc\xc3\x02\xc4\x84JO\xac\x89lO\x1a\xad;\xf6\x16\xf2!(s\xee\xb0J\xdbc\xa3]\xfe\x8d\x8aA\xf5\xb6jS#\xfd\xe2Z'
Receive: 25 14.555964 14.555865 49: seq: 13, identify_response offset=2640 data=b'Q\xf7\\b\xbb\x12=<\xf9\x9e\x12\xc0\x08\xc2\xb2\x1a\x922\xf5\x18\xf6\xf3\xd5\xf5O\xf4\xd0aZ\xfd\xaa:F\x03\xab\x8b\x01\xb3\x08\xec'
Receive: 26 14.556554 14.556331 49: seq: 14, identify_response offset=2680 data=b'\x06\x9c)\x01\xd1\xaa\xc9\xa9\xe3\xc3\x89N\xaa\xc8\tb\xe1\x0b\xe9\xe7\xc9\xe3\x02\xe6\x9fP\xcf\xc5\xe1&MU\xc2\xad?2\x95q\xd3G'
Receive: 27 14.557591 14.557472 49: seq: 15, identify_response offset=2720 data=b'\x96*\x17\x01\x1fY\xb6\x86q\xfc\xe9\x93j\xf8@\xba"9\xbd*\xeb6\xa7_\xc5K\x0c\xa3m\xc9\x17\xcd\xd4\x97\xe8P\xce\xb6E]'
Receive: 28 14.558026 14.557925 49: seq: 16, identify_response offset=2760 data=b'CJ\xf7\xddL\x9dL}\x1d\x7f\xb9\xbbi\xbf\xe7\xe0\xcc\x90j/\xf6\x1d\xfe\xd6\xc2{;\xc6\xc6\xcbKLFm\x7fu\xd6\xce\xa7%'
Receive: 29 14.558461 14.558363 49: seq: 17, identify_response offset=2800 data=b'\xcf5\xc0\xb046\xcf\xd63\x8a\xc2k\x9e2\x05\xd1\xe7\xc1\xc8D\xe9\x98\xeb\x08l\xec\xe3\x19x*\xfd\x12\xa0N\xa8\x1e\x0cp\xceh'
Receive: 30 14.558865 14.558768 49: seq: 18, identify_response offset=2840 data=b'\x96j\xc4@\x80\xf2\x19\xdfl\x91Z\xf5d?\xc7\xb5\xa6\xd0\x83\xdc\xed\xfe\x12\xe3\xbfy\xa5\x91\xe0\xa6\xed\xa3\xcb\x16\xeeT7k\r\xe8'
Receive: 31 14.559268 14.559170 49: seq: 19, identify_response offset=2880 data=b's\x02\x11\xe4\xe5iQl\x9c\x98\x07\x92\x19W\xc7\xae\x01\x7fp\xba\x88\xff\xfe\x02[\xc7\xee\xcd!7\xca\xe3\xba\x1b\xf4mD\xea\xf5\xf5'
Receive: 32 14.559665 14.559569 49: seq: 1a, identify_response offset=2920 data=b"=\\\xdb\xe0'm\xbaD\\|\xa0p\xd2d\xcb\xf2J\x0b\x14T\xce\xf4\x89\xbfDE1\x92\x9f\xed+\xff%\x15\x9d\xce\xa9\xe8\xca{"
Receive: 33 14.560374 14.560245 49: seq: 1b, identify_response offset=2960 data=b'\x87\x98\xdf\x88\x9c\xcaR\xbd\x83\x94\x88\x07\xc2\x07)\xf8Oq[t&.\xb8\x9bW\x83\xf3\x02H\xfd*\xfb\x8b\xac4\xf4)\xbc>\x99'
Receive: 34 14.560994 14.560859 49: seq: 1c, identify_response offset=3000 data=b'O\x80x\xd1\xb9\xee\xe6\xc9\x05\xfb\xfdr\xff\xa61\xf9\xf6\xdb\x89\x7f\xaa\x19\x91*\xa1\x87Q\x95\x11\x9b\x98\nj\xe9lAN\x8d\xfe\x91'
Receive: 35 14.561609 14.561480 49: seq: 1d, identify_response offset=3040 data=b"\xbf\x93)f\xaeC\xb8h\x1f\xd2S\x0f\xc4\x1e\xa8\xce\xe7\x9e\xf1\x0blc2\xb6\xa1\xae'sM\xc5\xd3\x13`;\x91N\xbb\xf5\x1b\x85"
Receive: 36 14.562167 14.562046 49: seq: 1e, identify_response offset=3080 data=b'\xce\x82\xca\xc2v-\xcf\xbeNz\x9ee\xab<\xbf*\xa0\xe9\xa9~\xf2\xdd\xce\x1a\x1c\xb3\xfeg\xa2`\x17\xdc\xaf.\xc3\xf0r\x05BN'
Receive: 37 14.562613 14.562514 26: seq: 1f, identify_response offset=3120 data=b"_\x1e\xee\xb6Q\xb2\xde\x84\xab\xe0\xd3\x7f\x01'\xd3\x1e\x16"
Receive: 38 14.563021 14.562923 9: seq: 10, identify_response offset=3137 data=b''
Receive: 39 14.606768 14.606592 12: seq: 11, uptime high=0 clock=330335947
Receive: 40 14.658005 14.657831 11: seq: 12, clock clock=332897503
Receive: 41 14.708880 14.708722 11: seq: 13, clock clock=335441733
Receive: 42 14.759825 14.759635 11: seq: 14, clock clock=337987862
Receive: 43 14.810758 14.810590 11: seq: 15, clock clock=340535432
Receive: 44 14.862221 14.862031 11: seq: 16, clock clock=343108140
Receive: 45 14.915394 14.913781 11: seq: 17, clock clock=345765139
Receive: 46 14.966455 14.966280 11: seq: 18, clock clock=348320483
Receive: 47 15.017357 15.017195 11: seq: 19, clock clock=350865471
Receive: 48 15.019795 15.019290 11: seq: 1a, clock clock=350968749
Receive: 49 15.036243 15.036067 10: seq: 1b, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 50 15.037826 15.037721 15: seq: 1e, config is_config=1 crc=3912464276 is_shutdown=0 move_count=1024
Receive: 51 16.004129 16.003857 11: seq: 1f, clock clock=400203264
Receive: 52 16.988429 16.988235 11: seq: 10, clock clock=449418768
Receive: 53 17.972947 17.972794 11: seq: 11, clock clock=498644793
Receive: 54 18.100267 17.972794 14: seq: 11, stats count=148 sum=169935 sumsq=1062118
Receive: 55 18.957932 18.957772 11: seq: 12, clock clock=547893637
Receive: 56 19.942316 19.942136 11: seq: 13, clock clock=597112507
Receive: 57 20.926806 20.926649 11: seq: 14, clock clock=646337543
Receive: 58 21.910954 21.910751 11: seq: 15, clock clock=695543560
Receive: 59 22.895215 22.895085 11: seq: 16, clock clock=744758449
Receive: 60 23.200236 22.895085 13: seq: 16, stats count=56 sum=17708 sumsq=80086
Receive: 61 23.880225 23.879939 11: seq: 17, clock clock=794008166
Receive: 62 24.864897 24.864736 11: seq: 18, clock clock=843242339
Receive: 63 25.849096 25.848947 11: seq: 19, clock clock=892452154
Receive: 64 26.833898 26.833784 11: seq: 1a, clock clock=941692507
Receive: 65 27.818896 27.818778 11: seq: 1b, clock clock=990942436
Receive: 66 28.300192 27.818778 13: seq: 1b, stats count=56 sum=16824 sumsq=72988
Receive: 67 28.802991 28.802870 11: seq: 1c, clock clock=1040147485
Receive: 68 29.787501 29.787223 11: seq: 1d, clock clock=1089370507
Receive: 69 30.772299 30.772176 11: seq: 1e, clock clock=1138612624
Receive: 70 31.757012 31.756888 11: seq: 1f, clock clock=1187848351
Receive: 71 32.741305 32.741072 11: seq: 10, clock clock=1237061860
Receive: 72 33.400221 32.741072 13: seq: 10, stats count=56 sum=17791 sumsq=106768
Receive: 73 33.725867 33.725709 11: seq: 11, clock clock=1286291023
Receive: 74 34.710748 34.710566 11: seq: 12, clock clock=1335535083
Receive: 75 35.695034 35.694848 11: seq: 13, clock clock=1384748889
Receive: 76 36.679460 36.679336 11: seq: 14, clock clock=1433970455
Receive: 77 37.663923 37.663808 11: seq: 15, clock clock=1483193813
Receive: 78 38.500144 37.663808 13: seq: 15, stats count=56 sum=16760 sumsq=69433
Receive: 79 38.648667 38.648536 11: seq: 16, clock clock=1532430107
Receive: 80 39.633006 39.632872 11: seq: 17, clock clock=1581646908
Receive: 81 40.617918 40.617660 11: seq: 18, clock clock=1630888982
Receive: 82 41.602843 41.602672 11: seq: 19, clock clock=1680137825
Receive: 83 42.587120 42.586980 11: seq: 1a, clock clock=1729353209
Receive: 84 43.500138 42.586980 13: seq: 1a, stats count=55 sum=17258 sumsq=89430
Receive: 85 43.571781 43.571657 11: seq: 1b, clock clock=1778586375
Receive: 86 44.555939 44.555823 11: seq: 1c, clock clock=1827794318
Receive: 87 45.540088 45.539932 11: seq: 1d, clock clock=1876999785
Receive: 88 46.524602 46.524451 11: seq: 1e, clock clock=1926226528
Receive: 89 47.509393 47.509210 11: seq: 1f, clock clock=1975465197
Receive: 90 48.493813 48.493662 11: seq: 10, clock clock=2024687633
Receive: 91 48.600120 48.493662 13: seq: 10, stats count=57 sum=18469 sumsq=94753
Receive: 92 49.478261 49.478092 11: seq: 11, clock clock=2073909780
Receive: 93 50.462969 50.462825 11: seq: 12, clock clock=2123145343
Receive: 94 51.447285 51.447169 11: seq: 13, clock clock=2172361625
Receive: 95 52.431799 52.431682 11: seq: 14, clock clock=2221587419
Receive: 96 53.416382 53.416057 11: seq: 15, clock clock=2270810923
Receive: 97 53.600236 53.416057 13: seq: 15, stats count=55 sum=17408 sumsq=89021
Receive: 98 54.400222 54.400106 11: seq: 16, clock clock=2320008499
Receive: 99 55.119400 55.119169 12: seq: 17, shutdown clock=2355964249 static_string_id=Command request
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=25854872519 p=3161 i=40000 c=-500 a=0
queue_step 1: t=25874872519 p=2661 i=40000 c=-500 a=0
queue_step 2: t=25894872519 p=2161 i=40000 c=-500 a=0
queue_step 3: t=25914872519 p=1661 i=40000 c=-500 a=0
queue_step 4: t=25934872519 p=1161 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=25854912530 p=1760 i=40000 c=500 a=0
queue_step 1: t=25874912530 p=2260 i=40000 c=500 a=0
queue_step 2: t=25894912530 p=2760 i=40000 c=500 a=0
queue_step 3: t=25914912530 p=3260 i=40000 c=500 a=0
queue_step 4: t=25934912530 p=3760 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=64.312231 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 64.772670: (117.5, 92.5, 340.2035450625001)
Stats 55.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13176 bytes_read=16557 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008014 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1053 bytes_read=5234 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999893 adj=49999001  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.59 cputime=2.745 memavail=3324400 print_time=65.041 buffer_time=0.226 print_stall=0 extruder: target=0 temp=28.2 pwm=0.000
Homing failed due to printer shutdown
Stats 56.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13512 bytes_read=16981 bytes_retransmit=9 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008020 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1059 bytes_read=5250 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999897 adj=49999011  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.59 cputime=2.769 memavail=3323192 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 57.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13518 bytes_read=17102 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008023 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1065 bytes_read=5266 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999901 adj=49999016  heater_bed: target=0 temp=35.7 pwm=0.000 sysload=0.59 cputime=2.778 memavail=3323192 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 58.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13524 bytes_read=17208 bytes_retransmit=9 bytes_invalid=0 send_seq=823 receive_seq=823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008038 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1071 bytes_read=5282 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999903 adj=49999019  heater_bed: target=0 temp=35.6 pwm=0.000 sysload=0.59 cputime=2.787 memavail=3322968 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 59.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13530 bytes_read=17329 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008061 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1077 bytes_read=5311 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999904 adj=49998987  heater_bed: target=0 temp=35.6 pwm=0.000 sysload=0.59 cputime=2.800 memavail=3322968 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 60.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=13536 bytes_read=17450 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008069 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1083 bytes_read=5327 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999915 adj=49998953  heater_bed: target=0 temp=35.6 pwm=0.000 sysload=0.62 cputime=2.817 memavail=3324476 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 61.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13542 bytes_read=17570 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008070 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1089 bytes_read=5343 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999915 adj=49999034  heater_bed: target=0 temp=35.6 pwm=0.000 sysload=0.62 cputime=2.827 memavail=3324228 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 62.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13548 bytes_read=17691 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008072 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1095 bytes_read=5359 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999920 adj=49998997  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.62 cputime=2.837 memavail=3324228 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 63.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13554 bytes_read=17812 bytes_retransmit=9 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008075 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1101 bytes_read=5375 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999924 adj=49999024  heater_bed: target=0 temp=35.6 pwm=0.000 sysload=0.62 cputime=2.846 memavail=3324228 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 64.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13560 bytes_read=17918 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008073 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1107 bytes_read=5404 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999928 adj=49999029  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.62 cputime=2.856 memavail=3324228 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 65.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13566 bytes_read=18038 bytes_retransmit=9 bytes_invalid=0 send_seq=830 receive_seq=830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008130 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1113 bytes_read=5420 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999933 adj=49999043  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.65 cputime=2.869 memavail=3324520 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 66.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13572 bytes_read=18168 bytes_retransmit=9 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008130 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1119 bytes_read=5436 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49998992  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.65 cputime=2.885 memavail=3326160 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.1 pwm=0.000
Stats 67.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13578 bytes_read=18274 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008116 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1125 bytes_read=5452 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999956 adj=49999193  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.65 cputime=2.895 memavail=3325896 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 68.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13584 bytes_read=18395 bytes_retransmit=9 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008120 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1131 bytes_read=5468 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999955 adj=49999167  heater_bed: target=0 temp=35.5 pwm=0.000 sysload=0.65 cputime=2.905 memavail=3325896 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 69.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13590 bytes_read=18516 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008118 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1143 bytes_read=5513 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49999095  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.65 cputime=2.914 memavail=3325900 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 70.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13596 bytes_read=18622 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008110 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1149 bytes_read=5529 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49999050  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.60 cputime=2.924 memavail=3325900 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 71.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13602 bytes_read=18757 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008150 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1155 bytes_read=5545 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999949 adj=49999013  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.60 cputime=2.938 memavail=3325900 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 72.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13608 bytes_read=18878 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008169 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1161 bytes_read=5561 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49998906  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.60 cputime=2.956 memavail=3325928 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 73.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13614 bytes_read=18984 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008180 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1167 bytes_read=5577 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999925 adj=49998783  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.60 cputime=2.973 memavail=3325928 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 74.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13620 bytes_read=19120 bytes_retransmit=9 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008192 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1173 bytes_read=5606 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999915 adj=49998642  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.60 cputime=2.993 memavail=3325932 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 75.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13626 bytes_read=19226 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008247 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1179 bytes_read=5622 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999896 adj=49998579  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.55 cputime=3.010 memavail=3325464 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 76.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13632 bytes_read=19344 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008261 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1185 bytes_read=5638 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999873 adj=49998366  heater_bed: target=0 temp=35.4 pwm=0.000 sysload=0.55 cputime=3.029 memavail=3325464 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 77.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13638 bytes_read=19477 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008268 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1191 bytes_read=5654 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999847 adj=49998206  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.55 cputime=3.048 memavail=3325464 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 78.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13644 bytes_read=19583 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008273 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1197 bytes_read=5670 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999818 adj=49998056  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.55 cputime=3.066 memavail=3325464 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 79.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13650 bytes_read=19689 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008275 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1203 bytes_read=5699 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999789 adj=49997914  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.55 cputime=3.084 memavail=3324988 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 80.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13656 bytes_read=19825 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008320 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1209 bytes_read=5715 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999758 adj=49997789  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.50 cputime=3.103 memavail=3324992 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 81.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13662 bytes_read=19945 bytes_retransmit=9 bytes_invalid=0 send_seq=846 receive_seq=846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008315 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1215 bytes_read=5731 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999727 adj=49997602  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.50 cputime=3.121 memavail=3324992 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 82.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13668 bytes_read=20051 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008310 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1221 bytes_read=5747 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999698 adj=49997518  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.50 cputime=3.139 memavail=3324992 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 83.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13674 bytes_read=20187 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008317 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1227 bytes_read=5763 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999675 adj=49997468  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.50 cputime=3.158 memavail=3324992 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 84.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13680 bytes_read=20293 bytes_retransmit=9 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008308 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1233 bytes_read=5792 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999652 adj=49997481  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.50 cputime=3.176 memavail=3324992 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.0 pwm=0.000
Stats 85.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13686 bytes_read=20399 bytes_retransmit=9 bytes_invalid=0 send_seq=850 receive_seq=850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008297 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1239 bytes_read=5808 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49997506  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.46 cputime=3.193 memavail=3324752 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 86.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13692 bytes_read=20549 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008298 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1245 bytes_read=5824 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999601 adj=49997481  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.46 cputime=3.213 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 87.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13698 bytes_read=20650 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008298 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1251 bytes_read=5840 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999576 adj=49997461  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.46 cputime=3.230 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 88.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13704 bytes_read=20755 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008288 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1257 bytes_read=5856 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999552 adj=49997425  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.46 cputime=3.248 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 89.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13710 bytes_read=20891 bytes_retransmit=9 bytes_invalid=0 send_seq=854 receive_seq=854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008329 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1263 bytes_read=5885 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999528 adj=49997418  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.46 cputime=3.266 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 90.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13716 bytes_read=20997 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008330 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1269 bytes_read=5901 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999505 adj=49997337  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.43 cputime=3.285 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 91.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13722 bytes_read=21117 bytes_retransmit=9 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008324 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1275 bytes_read=5917 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999481 adj=49997330  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.43 cputime=3.302 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 92.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13728 bytes_read=21253 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008327 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1281 bytes_read=5933 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999458 adj=49997322  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.43 cputime=3.321 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 93.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13734 bytes_read=21359 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008331 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1287 bytes_read=5948 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999437 adj=49997308  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.43 cputime=3.338 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 94.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13740 bytes_read=21465 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008375 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1293 bytes_read=5976 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999418 adj=49997303  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.43 cputime=3.356 memavail=3328292 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 95.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13746 bytes_read=21601 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008488 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1299 bytes_read=5991 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999402 adj=49997259  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.39 cputime=3.374 memavail=3328288 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 96.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13752 bytes_read=21721 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008474 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1305 bytes_read=6006 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999386 adj=49997158  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.39 cputime=3.392 memavail=3332364 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 97.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13758 bytes_read=21827 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008464 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1311 bytes_read=6021 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999371 adj=49997265  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.39 cputime=3.410 memavail=3332368 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 98.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13764 bytes_read=21958 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008455 host: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1317 bytes_read=6036 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999356 adj=49997350  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.39 cputime=3.429 memavail=3332368 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 99.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13770 bytes_read=22063 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008439 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1323 bytes_read=6065 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999343 adj=49997409  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.39 cputime=3.446 memavail=3332368 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 100.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13782 bytes_read=22200 bytes_retransmit=9 bytes_invalid=0 send_seq=866 receive_seq=866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008409 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1329 bytes_read=6081 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999332 adj=49997483  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.36 cputime=3.465 memavail=3332368 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 101.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13788 bytes_read=22335 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008399 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1335 bytes_read=6097 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999323 adj=49997587  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.36 cputime=3.483 memavail=3332144 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 102.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13794 bytes_read=22441 bytes_retransmit=9 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008393 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1341 bytes_read=6113 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999312 adj=49997662  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.36 cputime=3.502 memavail=3332144 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 103.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13800 bytes_read=22562 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008388 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1347 bytes_read=6129 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999307 adj=49997687  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.36 cputime=3.520 memavail=3331892 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 104.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13806 bytes_read=22683 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008375 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1353 bytes_read=6158 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999299 adj=49997762  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.36 cputime=3.539 memavail=3331892 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 105.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13812 bytes_read=22789 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008367 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1359 bytes_read=6174 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999293 adj=49997809  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.41 cputime=3.556 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 106.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13818 bytes_read=22924 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008363 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1365 bytes_read=6190 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999288 adj=49997851  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.41 cputime=3.575 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.9 pwm=0.000
Stats 107.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13824 bytes_read=23045 bytes_retransmit=9 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008358 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1371 bytes_read=6206 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999283 adj=49997883  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.41 cputime=3.593 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 108.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13830 bytes_read=23150 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008403 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1377 bytes_read=6222 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999278 adj=49997912  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.41 cputime=3.610 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 109.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13836 bytes_read=23268 bytes_retransmit=9 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008397 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1383 bytes_read=6251 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999276 adj=49997857  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.41 cputime=3.628 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 110.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13842 bytes_read=23389 bytes_retransmit=9 bytes_invalid=0 send_seq=876 receive_seq=876 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008388 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1389 bytes_read=6267 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999277 adj=49997932  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.38 cputime=3.646 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 111.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13848 bytes_read=23509 bytes_retransmit=9 bytes_invalid=0 send_seq=877 receive_seq=877 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008377 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1395 bytes_read=6283 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999278 adj=49998036  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.38 cputime=3.664 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 112.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13854 bytes_read=23630 bytes_retransmit=9 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008377 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1401 bytes_read=6299 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999280 adj=49998117  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.38 cputime=3.682 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 113.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13860 bytes_read=23751 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008369 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1407 bytes_read=6315 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999282 adj=49998175  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.38 cputime=3.700 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 114.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13866 bytes_read=23857 bytes_retransmit=9 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008362 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1413 bytes_read=6344 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999280 adj=49998227  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.38 cputime=3.718 memavail=3331136 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Stats 115.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13872 bytes_read=23978 bytes_retransmit=9 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008355 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1419 bytes_read=6360 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999281 adj=49998216  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.35 cputime=3.735 memavail=3331144 print_time=65.364 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.8 pwm=0.000
Resetting prediction variance 145.968: freq=49999442 diff=3815970 stddev=10282.385
Resetting prediction variance 146.953: freq=50005753 diff=3685414 stddev=50000.000
Resetting prediction variance 147.938: freq=50011623 diff=3556197 stddev=50000.000
Resetting prediction variance 148.922: freq=50017094 diff=3431184 stddev=50000.000
Resetting prediction variance 149.906: freq=50022206 diff=3307381 stddev=50000.000
Resetting prediction variance 150.891: freq=50026989 diff=3186037 stddev=50000.000
Resetting prediction variance 151.875: freq=50031472 diff=3066120 stddev=50000.000
Resetting prediction variance 152.860: freq=50035677 diff=2948285 stddev=50000.000
Resetting prediction variance 153.844: freq=50039625 diff=2830924 stddev=50000.000
Resetting prediction variance 154.828: freq=50043334 diff=2716519 stddev=50000.000
Resetting prediction variance 155.813: freq=50046820 diff=2601282 stddev=50000.000
Resetting prediction variance 156.798: freq=50050095 diff=2489788 stddev=50000.000
Resetting prediction variance 157.783: freq=50053175 diff=2374900 stddev=50000.000
Resetting prediction variance 158.767: freq=50056064 diff=2265113 stddev=50000.000
Resetting prediction variance 159.751: freq=50058777 diff=2156266 stddev=50000.000
Resetting prediction variance 160.736: freq=50061322 diff=2049290 stddev=50000.000
Resetting prediction variance 161.720: freq=50063709 diff=1943885 stddev=50000.000
Resetting prediction variance 162.705: freq=50065945 diff=1838895 stddev=50000.000
Resetting prediction variance 163.689: freq=50068036 diff=1737475 stddev=50000.000
Resetting prediction variance 164.674: freq=50069990 diff=1636830 stddev=50000.000
Resetting prediction variance 165.659: freq=50071812 diff=1540980 stddev=50000.000
Resetting prediction variance 166.644: freq=50073511 diff=1445362 stddev=50000.000
Resetting prediction variance 167.628: freq=50075091 diff=1350796 stddev=50000.000
Resetting prediction variance 168.613: freq=50076556 diff=1260215 stddev=50000.000
Resetting prediction variance 169.597: freq=50077912 diff=1171649 stddev=50000.000
Resetting prediction variance 170.582: freq=50079164 diff=1085502 stddev=50000.000
Resetting prediction variance 171.567: freq=50080316 diff=998745 stddev=50000.000
Resetting prediction variance 172.551: freq=50081370 diff=917776 stddev=50000.000
Resetting prediction variance 173.536: freq=50082333 diff=838562 stddev=50000.000
Resetting prediction variance 174.520: freq=50083208 diff=759371 stddev=50000.000
Resetting prediction variance 175.505: freq=50083997 diff=684116 stddev=50000.000
Resetting prediction variance 176.490: freq=50084705 diff=611693 stddev=50000.000
Resetting prediction variance 177.475: freq=50085336 diff=541243 stddev=50000.000
Resetting prediction variance 178.459: freq=50085891 diff=474678 stddev=50000.000
Resetting prediction variance 179.443: freq=50086377 diff=410382 stddev=50000.000
Resetting prediction variance 180.428: freq=50086796 diff=346662 stddev=50000.000
Resetting prediction variance 181.413: freq=50087149 diff=285959 stddev=50000.000
Resetting prediction variance 200.124: freq=50084418 diff=-1729135 stddev=207470.688
Resetting prediction variance 201.112: freq=50082680 diff=-2609806 stddev=50000.000
Resetting prediction variance 202.100: freq=50080054 diff=-3316613 stddev=50000.000
Resetting prediction variance 203.087: freq=50076714 diff=-3886902 stddev=50000.000
Resetting prediction variance 204.073: freq=50072796 diff=-4334796 stddev=50000.000
Resetting prediction variance 205.058: freq=50068423 diff=-4676411 stddev=50000.000
Resetting prediction variance 206.043: freq=50063700 diff=-4924693 stddev=50000.000
Resetting prediction variance 207.028: freq=50058722 diff=-5095887 stddev=50000.000
Resetting prediction variance 208.013: freq=50053565 diff=-5207501 stddev=50000.000
Resetting prediction variance 208.997: freq=50048290 diff=-5259332 stddev=50000.000
Resetting prediction variance 209.983: freq=50042956 diff=-5265649 stddev=50000.000
Resetting prediction variance 210.968: freq=50037610 diff=-5233377 stddev=50000.000
Resetting prediction variance 211.954: freq=50032289 diff=-5168537 stddev=50000.000
Resetting prediction variance 212.939: freq=50027028 diff=-5070935 stddev=50000.000
Resetting prediction variance 213.924: freq=50021859 diff=-4958437 stddev=50000.000
Resetting prediction variance 214.909: freq=50016799 diff=-4826731 stddev=50000.000
Resetting prediction variance 215.894: freq=50011867 diff=-4680982 stddev=50000.000
Resetting prediction variance 216.879: freq=50007077 diff=-4522519 stddev=50000.000
Resetting prediction variance 217.864: freq=50002442 diff=-4358074 stddev=50000.000
Resetting prediction variance 218.849: freq=49997971 diff=-4188339 stddev=50000.000
Resetting prediction variance 219.833: freq=49993667 diff=-4013867 stddev=50000.000
Resetting prediction variance 220.818: freq=49989537 diff=-3837684 stddev=50000.000
Resetting prediction variance 221.803: freq=49985583 diff=-3663182 stddev=50000.000
Resetting prediction variance 222.788: freq=49981803 diff=-3486126 stddev=50000.000
Resetting prediction variance 223.773: freq=49978201 diff=-3311721 stddev=50000.000
Resetting prediction variance 224.758: freq=49974775 diff=-3137284 stddev=50000.000
Resetting prediction variance 225.743: freq=49971524 diff=-2969810 stddev=50000.000
Resetting prediction variance 226.727: freq=49968442 diff=-2803692 stddev=50000.000
Resetting prediction variance 227.712: freq=49965529 diff=-2642205 stddev=50000.000
Resetting prediction variance 228.697: freq=49962779 diff=-2484405 stddev=50000.000
Resetting prediction variance 229.681: freq=49960190 diff=-2330958 stddev=50000.000
Resetting prediction variance 230.666: freq=49957758 diff=-2182822 stddev=50000.000
Resetting prediction variance 231.650: freq=49955477 diff=-2015940 stddev=50000.000
Resetting prediction variance 232.635: freq=49953367 diff=-1835577 stddev=50000.000
Resetting prediction variance 233.619: freq=49951444 diff=-1666560 stddev=50000.000
Resetting prediction variance 234.604: freq=49949695 diff=-1508119 stddev=50000.000
Resetting prediction variance 235.589: freq=49948110 diff=-1360774 stddev=50000.000
Resetting prediction variance 236.573: freq=49946678 diff=-1219957 stddev=50000.000
Resetting prediction variance 237.558: freq=49945393 diff=-1089471 stddev=50000.000
Resetting prediction variance 238.543: freq=49944244 diff=-968547 stddev=50000.000
Resetting prediction variance 239.528: freq=49943221 diff=-854593 stddev=50000.000
Resetting prediction variance 240.513: freq=49942317 diff=-745006 stddev=50000.000
Resetting prediction variance 241.498: freq=49941528 diff=-645276 stddev=50000.000
Resetting prediction variance 242.482: freq=49940843 diff=-552302 stddev=50000.000
Resetting prediction variance 243.467: freq=49940257 diff=-467718 stddev=50000.000
Resetting prediction variance 244.451: freq=49939760 diff=-386085 stddev=50000.000
Resetting prediction variance 245.436: freq=49939349 diff=-312332 stddev=50000.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-248-gd725dfd3-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:08:09 2023 (1690571290.0 635.2)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 547661525920: New connection
webhooks client 547661525920: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
mcu 'mcu': got {'oid': 14, 'next_clock': 797962240, 'value': 30996, '#name': 'analog_in_state', '#sent_time': 636.265358491, '#receive_time': 636.281939509}
mcu 'mcu': got {'oid': 22, 'next_clock': 829962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 636.316056009, '#receive_time': 636.361948509}
Loaded MCU 'mcu' 107 commands (v0.11.0-235-gb9247810 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
mcu 'mcu': got {'oid': 14, 'next_clock': 917962240, 'value': 30999, '#name': 'analog_in_state', '#sent_time': 636.571883491, '#receive_time': 636.58206412}
mcu 'mcu': got {'oid': 22, 'next_clock': 949962240, 'value': 31214, '#name': 'analog_in_state', '#sent_time': 636.571883491, '#receive_time': 636.662018009}
mcu 'mcu': got {'oid': 14, 'next_clock': 1037962240, 'value': 30999, '#name': 'analog_in_state', '#sent_time': 636.571883491, '#receive_time': 636.881938713}
mcu 'mcu': got {'oid': 22, 'next_clock': 1069962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 636.571883491, '#receive_time': 636.961953268}
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 180, in _connect
    cb()
  File "/home/pi/klipper/klippy/mcu.py", line 747, in _connect
    config_params = self._send_get_config()
  File "/home/pi/klipper/klippy/mcu.py", line 733, in _send_get_config
    raise error("Can not update MCU '%s' config as it is shutdown" % (
mcu.error: Can not update MCU 'mcu' config as it is shutdown
Build file /home/pi/klipper/klippy/../.config(3418): Fri Jul 28 16:06:30 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32h743xx"
CONFIG_CLOCK_FREQ=400000000
CONFIG_USBSERIAL=y
CONFIG_FLASH_SIZE=0x200000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x20000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8020000
CONFIG_STM32_SELECT=y
# CONFIG_MACH_STM32F103 is not set
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32H723 is not set
CONFIG_MACH_STM32H743=y
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
CONFIG_MACH_STM32H7=y
CONFIG_HAVE_STM32_USBOTG=y
CONFIG_HAVE_STM32_FDCANBUS=y
CONFIG_HAVE_STM32_USBCANBUS=y
CONFIG_STM32_DFU_ROM_ADDRESS=0x1ff09800
CONFIG_STM32_FLASH_START_20000=y
# CONFIG_STM32_FLASH_START_0000 is not set
# CONFIG_STM32_CLOCK_REF_8M is not set
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
CONFIG_STM32_CLOCK_REF_25M=y
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=25000000
CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12=y
# CONFIG_STM32_USB_PB14_PB15 is not set
# CONFIG_STM32_SERIAL_USART1 is not set
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_SERIAL_UART4 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB12_PB13 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
# CONFIG_STM32_MMENU_CANBUS_PB0_PB1 is not set
# CONFIG_STM32_MMENU_CANBUS_PD12_PD13 is not set
# CONFIG_STM32_MMENU_CANBUS_PC2_PC3 is not set
# CONFIG_STM32_USBCANBUS_PA11_PA12 is not set
CONFIG_USB=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER_CHIPID=y
CONFIG_USB_SERIAL_NUMBER="12345"

#
# USB ids
#
# end of USB ids

CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7959): Fri Jul 28 16:07:04 2023
Last MCU build version: v0.11.0-248-gd725dfd3
Last MCU build tools: gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2
Last MCU build config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Build file /home/pi/klipper/klippy/../out/klipper.elf(1767620): Fri Jul 28 16:07:13 2023
mcu 'mcu': got {'oid': 14, 'next_clock': 1157962240, 'value': 30999, '#name': 'analog_in_state', '#sent_time': 637.040822175, '#receive_time': 637.181945361}
mcu 'mcu': got {'oid': 22, 'next_clock': 1189962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 637.040822175, '#receive_time': 637.261955546}
mcu 'mcu': got {'oid': 14, 'next_clock': 1277962240, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 637.040822175, '#receive_time': 637.481991083}
mcu 'mcu': got {'oid': 22, 'next_clock': 1309962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 637.561891916}
mcu 'mcu': got {'oid': 14, 'next_clock': 1397962240, 'value': 30998, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 637.781948564}
mcu 'mcu': got {'oid': 22, 'next_clock': 1429962240, 'value': 31219, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 637.861915953}
mcu 'mcu': got {'oid': 14, 'next_clock': 1517962240, 'value': 30998, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 638.081940916}
mcu 'mcu': got {'oid': 22, 'next_clock': 1549962240, 'value': 31220, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 638.16192999}
mcu 'mcu': got {'oid': 14, 'next_clock': 1637962240, 'value': 30996, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 638.381905415}
mcu 'mcu': got {'oid': 22, 'next_clock': 1669962240, 'value': 31223, '#name': 'analog_in_state', '#sent_time': 637.556461934, '#receive_time': 638.461920545}
mcu 'mcu': got {'oid': 14, 'next_clock': 1757962240, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 638.681923952}
mcu 'mcu': got {'oid': 22, 'next_clock': 1789962240, 'value': 31221, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 638.761931711}
mcu 'mcu': got {'oid': 14, 'next_clock': 1877962240, 'value': 31002, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 638.981972859}
mcu 'mcu': got {'oid': 22, 'next_clock': 1909962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 639.062035248}
mcu 'mcu': got {'oid': 14, 'next_clock': 1997962240, 'value': 30999, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 639.282003341}
mcu 'mcu': got {'oid': 22, 'next_clock': 2029962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 638.540590675, '#receive_time': 639.361956618}
mcu 'mcu': got {'oid': 14, 'next_clock': 2117962240, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 639.581928674}
mcu 'mcu': got {'oid': 22, 'next_clock': 2149962240, 'value': 31216, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 639.661969933}
mcu 'mcu': got {'oid': 14, 'next_clock': 2237962240, 'value': 30999, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 639.881960544}
mcu 'mcu': got {'oid': 22, 'next_clock': 2269962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 639.961980933}
mcu 'mcu': got {'oid': 14, 'next_clock': 2357962240, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 640.181970081}
mcu 'mcu': got {'oid': 22, 'next_clock': 2389962240, 'value': 31222, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 640.261914044}
mcu 'mcu': got {'oid': 14, 'next_clock': 2477962240, 'value': 31001, '#name': 'analog_in_state', '#sent_time': 639.525468841, '#receive_time': 640.481971044}
mcu 'mcu': got {'oid': 22, 'next_clock': 2509962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 640.561944673}
mcu 'mcu': got {'oid': 14, 'next_clock': 2597962240, 'value': 30996, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 640.781954284}
mcu 'mcu': got {'oid': 22, 'next_clock': 2629962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 640.861936136}
mcu 'mcu': got {'oid': 14, 'next_clock': 2717962240, 'value': 30993, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 641.081936895}
mcu 'mcu': got {'oid': 22, 'next_clock': 2749962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 641.161877136}
mcu 'mcu': got {'oid': 14, 'next_clock': 2837962240, 'value': 30997, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 641.38186908}
mcu 'mcu': got {'oid': 22, 'next_clock': 2869962240, 'value': 31216, '#name': 'analog_in_state', '#sent_time': 640.510559025, '#receive_time': 641.461874006}
mcu 'mcu': got {'oid': 14, 'next_clock': 2957962240, 'value': 31001, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 641.681860839}
mcu 'mcu': got {'oid': 22, 'next_clock': 2989962240, 'value': 31217, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 641.761860062}
mcu 'mcu': got {'oid': 14, 'next_clock': 3077962240, 'value': 31001, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 641.981839395}
mcu 'mcu': got {'oid': 22, 'next_clock': 3109962240, 'value': 31221, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 642.061883747}
mcu 'mcu': got {'oid': 14, 'next_clock': 3197962240, 'value': 30998, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 642.28185658}
mcu 'mcu': got {'oid': 22, 'next_clock': 3229962240, 'value': 31218, '#name': 'analog_in_state', '#sent_time': 641.495266451, '#receive_time': 642.361858635}
mcu 'mcu': got {'oid': 14, 'next_clock': 3317962240, 'value': 30995, '#name': 'analog_in_state', '#sent_time': 642.479848209, '#receive_time': 642.581887617}
mcu 'mcu': got {'oid': 22, 'next_clock': 3349962240, 'value': 31222, '#name': 'analog_in_state', '#sent_time': 642.479848209, '#receive_time': 642.661938079}
mcu 'mcu': got {'oid': 14, 'next_clock': 3437962240, 'value': 30995, '#name': 'analog_in_state', '#sent_time': 642.479848209, '#receive_time': 642.881855135}
mcu 'mcu': got {'oid': 22, 'next_clock': 3469962240, 'value': 31219, '#name': 'analog_in_state', '#sent_time': 642.479848209, '#receive_time': 642.961837987}
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-250-ge9534d6f-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:22:44 2023 (1690572164.7 1509.9)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 548341765264: New connection
webhooks client 548341765264: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
webhooks: registering remote method 'shutdown_machine' for connection id: 548341765264
webhooks: registering remote method 'reboot_machine' for connection id: 548341765264
webhooks: registering remote method 'pause_job_queue' for connection id: 548341765264
webhooks: registering remote method 'start_job_queue' for connection id: 548341765264
webhooks client 548341765264: Disconnected
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-250-ge9534d6f-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:23:24 2023 (1690572204.9 12.5)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': got {'oid': 22, 'next_clock': 3028915712, 'value': 31290, '#name': 'analog_in_state', '#sent_time': 14.115453028, '#receive_time': 14.155995899}
mcu 'mcu': got {'oid': 14, 'next_clock': 3116915712, 'value': 31261, '#name': 'analog_in_state', '#sent_time': 14.372383454, '#receive_time': 14.376094102}
mcu 'mcu': got {'oid': 22, 'next_clock': 3148915712, 'value': 31295, '#name': 'analog_in_state', '#sent_time': 14.423659806, '#receive_time': 14.455898065}
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
mcu 'mcu': got {'oid': 14, 'next_clock': 3236915712, 'value': 31259, '#name': 'analog_in_state', '#sent_time': 14.529566454, '#receive_time': 14.675863935}
mcu 'mcu': got {'oid': 22, 'next_clock': 3268915712, 'value': 31293, '#name': 'analog_in_state', '#sent_time': 14.529566454, '#receive_time': 14.755847157}
mcu 'mcu': got {'oid': 14, 'next_clock': 3356915712, 'value': 31262, '#name': 'analog_in_state', '#sent_time': 14.529566454, '#receive_time': 14.975849768}
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
webhooks client 548226294304: New connection
webhooks client 548226294304: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
webhooks: registering remote method 'shutdown_machine' for connection id: 548226294304
webhooks: registering remote method 'reboot_machine' for connection id: 548226294304
webhooks: registering remote method 'pause_job_queue' for connection id: 548226294304
webhooks: registering remote method 'start_job_queue' for connection id: 548226294304
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-250-ge9534d6f-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:24:13 2023 (1690572253.8 12.3)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 547781520784: New connection
webhooks client 547781520784: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3001 bytes_read=5901 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400025370 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=808 bytes_read=4488 bytes_retransmit=0 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50004392 adj=50004304  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.19 cputime=1.967 memavail=3333848 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547781520784
webhooks: registering remote method 'reboot_machine' for connection id: 547781520784
webhooks: registering remote method 'pause_job_queue' for connection id: 547781520784
webhooks: registering remote method 'start_job_queue' for connection id: 547781520784
Stats 17.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3007 bytes_read=6022 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400013312 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=814 bytes_read=4504 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002851 adj=50000042  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.19 cputime=1.987 memavail=3365152 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 18.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3013 bytes_read=6128 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009849 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=820 bytes_read=4520 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002196 adj=50000459  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.19 cputime=1.996 memavail=3357196 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 19.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3019 bytes_read=6249 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008987 host: mcu_awake=0.003 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=826 bytes_read=4550 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001124 adj=50000284  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.19 cputime=2.016 memavail=3326800 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 20.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3025 bytes_read=6370 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008462 host: mcu_awake=0.003 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=832 bytes_read=4566 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000568 adj=49998471  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.19 cputime=2.025 memavail=3328776 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 21.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000019 mcu_task_stddev=0.000113 bytes_write=3031 bytes_read=6476 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008304 host: mcu_awake=0.003 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=838 bytes_read=4582 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000386 adj=49997791  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.17 cputime=2.034 memavail=3342420 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 22.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3037 bytes_read=6627 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008158 host: mcu_awake=0.003 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=844 bytes_read=4598 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000198 adj=49997809  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.17 cputime=2.042 memavail=3345244 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 23.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3043 bytes_read=6730 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007997 host: mcu_awake=0.003 mcu_task_avg=0.000024 mcu_task_stddev=0.000016 bytes_write=850 bytes_read=4614 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000096 adj=49997785  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.17 cputime=2.049 memavail=3341760 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 24.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3049 bytes_read=6834 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008066 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=856 bytes_read=4643 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000075 adj=49997889  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.17 cputime=2.059 memavail=3321404 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 25.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3055 bytes_read=6970 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008261 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=862 bytes_read=4659 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000054 adj=49998095  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.17 cputime=2.070 memavail=3335836 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 26.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3061 bytes_read=7076 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008171 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=868 bytes_read=4675 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000032 adj=49998177  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.24 cputime=2.083 memavail=3326624 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 27.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3067 bytes_read=7196 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008173 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=874 bytes_read=4691 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000014 adj=49998351  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.24 cputime=2.091 memavail=3330572 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 28.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3073 bytes_read=7332 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008123 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=880 bytes_read=4707 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999993 adj=49998443  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.24 cputime=2.099 memavail=3329648 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 29.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3079 bytes_read=7438 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008102 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=886 bytes_read=4736 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999969 adj=49998500  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.24 cputime=2.106 memavail=3329648 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 30.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3085 bytes_read=7544 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008024 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=892 bytes_read=4752 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999974 adj=49998627  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=1.24 cputime=2.115 memavail=3325968 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 31.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3091 bytes_read=7680 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008213 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=898 bytes_read=4768 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999957 adj=49998674  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.14 cputime=2.123 memavail=3326712 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 32.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3097 bytes_read=7800 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008171 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=904 bytes_read=4784 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999957 adj=49998565  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.14 cputime=2.130 memavail=3326712 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 33.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3103 bytes_read=7906 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008102 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=910 bytes_read=4800 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49998681  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.14 cputime=2.137 memavail=3326712 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 34.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3109 bytes_read=8037 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008068 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=916 bytes_read=4829 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999950 adj=49998779  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.14 cputime=2.144 memavail=3326712 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 35.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3115 bytes_read=8142 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008099 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=922 bytes_read=4845 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999990 adj=49998821  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.14 cputime=2.154 memavail=3327492 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 36.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3121 bytes_read=8248 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008202 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=928 bytes_read=4861 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000013 adj=49999051  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.05 cputime=2.165 memavail=3329004 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 37.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3127 bytes_read=8398 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008180 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=934 bytes_read=4877 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000011 adj=49999090  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.05 cputime=2.173 memavail=3329008 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 38.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3133 bytes_read=8504 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008171 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=940 bytes_read=4893 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000000 adj=49999066  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.05 cputime=2.180 memavail=3329008 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 39.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3139 bytes_read=8610 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008155 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=946 bytes_read=4922 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999995 adj=49998989  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=1.05 cputime=2.188 memavail=3329008 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 40.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3151 bytes_read=8762 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=952 bytes_read=4938 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49998965  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=1.05 cputime=2.195 memavail=3329008 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 41.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3157 bytes_read=8868 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008181 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=958 bytes_read=4954 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000030 adj=49998953  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.96 cputime=2.206 memavail=3329008 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 42.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3163 bytes_read=8988 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008187 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=964 bytes_read=4970 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000023 adj=49999184  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.96 cputime=2.217 memavail=3327524 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 43.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3169 bytes_read=9124 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008162 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=970 bytes_read=4986 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000009 adj=49999090  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.96 cputime=2.225 memavail=3327292 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 44.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3175 bytes_read=9230 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008134 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=976 bytes_read=5015 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999995 adj=49999038  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.96 cputime=2.232 memavail=3327292 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 45.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3181 bytes_read=9331 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008189 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=982 bytes_read=5031 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999985 adj=49998962  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.96 cputime=2.239 memavail=3327580 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 46.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3187 bytes_read=9467 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008184 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=988 bytes_read=5047 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999977 adj=49998845  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.89 cputime=2.247 memavail=3327580 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 47.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3193 bytes_read=9587 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008217 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=994 bytes_read=5063 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000002 adj=49998817  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.89 cputime=2.258 memavail=3327580 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 48.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3199 bytes_read=9693 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008210 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=1000 bytes_read=5079 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000000 adj=49999010  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.89 cputime=2.269 memavail=3325944 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 49.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3205 bytes_read=9829 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008201 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1006 bytes_read=5108 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999995 adj=49998997  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.89 cputime=2.277 memavail=3326456 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 50.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3211 bytes_read=9935 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1012 bytes_read=5124 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999992 adj=49998961  heater_bed: target=0 temp=25.4 pwm=0.000 sysload=0.89 cputime=2.284 memavail=3322012 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 52.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=4932 bytes_read=11338 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008132 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1024 bytes_read=5156 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999983 adj=49998925  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.81 cputime=2.342 memavail=3321524 print_time=61.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 53.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=5532 bytes_read=11776 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008210 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1030 bytes_read=5172 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999995 adj=49998860  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.81 cputime=2.377 memavail=3325304 print_time=62.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 54.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=6132 bytes_read=12214 bytes_retransmit=9 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008269 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000017 bytes_write=1036 bytes_read=5201 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999996 adj=49998906  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.81 cputime=2.413 memavail=3329884 print_time=63.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 55.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=6730 bytes_read=12680 bytes_retransmit=9 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000017 bytes_write=1042 bytes_read=5217 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999988 adj=49998869  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.81 cputime=2.434 memavail=3332284 print_time=64.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 56.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=7325 bytes_read=13109 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008180 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000017 bytes_write=1048 bytes_read=5233 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999980 adj=49998877  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.75 cputime=2.453 memavail=3332036 print_time=65.438 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 57.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=8201 bytes_read=13665 bytes_retransmit=9 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008178 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000017 bytes_write=1054 bytes_read=5249 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999973 adj=49998834  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.75 cputime=2.477 memavail=3332036 print_time=66.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 58.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=9512 bytes_read=14732 bytes_retransmit=9 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008147 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000017 bytes_write=1060 bytes_read=5265 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999971 adj=49998803  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.75 cputime=2.517 memavail=3332036 print_time=67.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 59.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=10014 bytes_read=15226 bytes_retransmit=9 bytes_invalid=0 send_seq=617 receive_seq=617 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008250 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1066 bytes_read=5294 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999968 adj=49998860  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.75 cputime=2.553 memavail=3332036 print_time=68.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 60.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=10501 bytes_read=15720 bytes_retransmit=9 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008249 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1072 bytes_read=5310 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999978 adj=49998729  heater_bed: target=0 temp=25.4 pwm=0.000 sysload=0.75 cputime=2.590 memavail=3330288 print_time=69.458 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 61.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=11759 bytes_read=16287 bytes_retransmit=9 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008283 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1078 bytes_read=5326 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999977 adj=49998877  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.77 cputime=2.627 memavail=3330152 print_time=70.552 buffer_time=0.302 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 62.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=11947 bytes_read=16546 bytes_retransmit=9 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008247 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1084 bytes_read=5342 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999974 adj=49998846  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.77 cputime=2.639 memavail=3330152 print_time=70.552 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 63.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=12297 bytes_read=16971 bytes_retransmit=9 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=400008245 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=1090 bytes_read=5358 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999973 adj=49998883  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.77 cputime=2.657 memavail=3330152 print_time=72.482 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 64.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=13015 bytes_read=17447 bytes_retransmit=9 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008213 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1096 bytes_read=5387 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999971 adj=49998890  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.77 cputime=2.679 memavail=3330152 print_time=73.432 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 65.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=13657 bytes_read=17921 bytes_retransmit=9 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008212 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1102 bytes_read=5403 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999972 adj=49998920  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.77 cputime=2.715 memavail=3329652 print_time=74.432 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 547781520784
Received 16.461717: b'{"id": 547326961696, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 16.715731: b'{"id": 547627671760, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 16.718333: b'{"id": 547627671760, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 16.720807: b'{"id": 547627671760, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 16.722820: b'{"id": 547627671760, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 16.725279: b'{"id": 547299455376, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 16.725671: b'{"id": 547299455232, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 16.960908: b'{"id": 547299455376, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 16.961396: b'{"id": 547299455856, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 18.133375: b'{"id": 547299579216, "method": "info", "params": {}}'
Received 18.144720: b'{"id": 547299579936, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 18.234634: b'{"id": 547299462352, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "heater_fan my_nozzle_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 18.243063: b'{"id": 547299462256, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null, "heater_fan my_nozzle_fan": null}}}'
Received 24.782624: b'{"id": 547325217040, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 25.000901: b'{"id": 547627612048, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null}}}'
Received 25.004250: b'{"id": 547325215120, "method": "objects/list", "params": {"objects": {}}}'
Received 25.010709: b'{"id": 547325215168, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed", "p", "d", "s", "e"], "gcode_move": ["speed_factor", "speed", "homing_origin", "extrude_factor", "gcode_position"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "max_accel_to_decel", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "heater_fan my_nozzle_fan": ["speed"]}, "response_template": {"method": "process_status_update"}}}'
Received 38.017052: b'{"id": 547325215072, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 51.113256: b'{"id": 547627651024, "method": "gcode/script", "params": {"script": "G28"}}'
Received 65.704910: b'{"id": 547627613200, "method": "emergency_stop", "params": {}}'
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=29929417478 clock_est=(41.845 20444909776 400008209.768) min_half_rtt=0.000065 min_rtt_time=55.712 time_avg=41.845(316.222) clock_avg=20444909776.887(126491479527.235) pred_variance=20327238150.626
Dumping serial stats: bytes_write=14193 bytes_read=18347 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 62.602973 62.602973 14: seq: 15, get_clock, queue_digital_out oid=18 clock=3096520390 on_ticks=0
Sent 1 62.692273 62.692273 13: seq: 16, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 2 62.692341 62.692341 13: seq: 17, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 3 62.692921 62.692921 13: seq: 18, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 4 62.692963 62.692963 13: seq: 19, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 5 62.900975 62.900975 15: seq: 1a, queue_digital_out oid=18 clock=3136520391 on_ticks=466000
Sent 6 63.001053 63.001053 13: seq: 1b, queue_digital_out oid=18 clock=3176520391 on_ticks=0
Sent 7 63.050177 63.050177 29: seq: 1c, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=12 dir=0, queue_step oid=6 interval=3223343695 count=1 add=0, queue_step oid=12 interval=3223343695 count=1 add=0
Sent 8 63.100554 63.100554 63: seq: 1d, queue_step oid=6 interval=292820 count=1 add=0, queue_step oid=12 interval=292820 count=1 add=0, queue_step oid=6 interval=191755 count=4 add=-22695, queue_step oid=12 interval=191755 count=4 add=-22695, queue_step oid=6 interval=109997 count=10 add=-4471, queue_step oid=12 interval=109997 count=10 add=-4471, queue_step oid=6 interval=68108 count=22 add=-1144
Sent 9 63.100554 63.100554 45: seq: 1e, queue_step oid=12 interval=68108 count=22 add=-1144, queue_step oid=6 interval=44843 count=25 add=-286, queue_step oid=12 interval=44843 count=25 add=-286, queue_step oid=6 interval=40011 count=736 add=0, queue_step oid=12 interval=40011 count=737 add=0
Sent 10 63.150153 63.150153 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 11 63.155418 63.155418 13: seq: 10, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 12 63.155495 63.155495 13: seq: 11, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 13 63.155613 63.155613 13: seq: 12, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 14 63.155727 63.155727 13: seq: 13, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 15 63.156216 63.156216 13: seq: 14, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 16 63.156354 63.156354 13: seq: 15, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 17 63.156564 63.156564 13: seq: 16, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 18 63.156782 63.156782 13: seq: 17, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 19 63.199610 63.199610 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 20 63.249939 63.249939 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 21 63.300284 63.300284 28: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3356544092
Sent 22 63.350579 63.350579 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 23 63.399883 63.399883 28: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3396544086
Sent 24 63.450207 63.450207 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 25 63.499516 63.499516 28: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3436544017
Sent 26 63.549832 63.549832 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 27 63.586992 63.586992 6: seq: 10, get_clock
Sent 28 63.600216 63.600216 28: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3476544090
Sent 29 63.649676 63.649676 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 30 63.692948 63.692948 13: seq: 13, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 31 63.693025 63.693025 13: seq: 14, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 32 63.693584 63.693584 13: seq: 15, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 33 63.693612 63.693612 13: seq: 16, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 34 63.700380 63.700380 28: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3516544013
Sent 35 63.749836 63.749836 21: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 36 63.800281 63.800281 28: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3556544096
Sent 37 63.850534 63.850534 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 38 63.899938 63.899938 28: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3596544100
Sent 39 63.950276 63.950276 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 40 63.999856 63.999856 28: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3636544092
Sent 41 64.050337 64.050337 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 42 64.099967 64.099967 28: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3676544092
Sent 43 64.150487 64.150487 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 44 64.155759 64.155759 13: seq: 11, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 45 64.155839 64.155839 13: seq: 12, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 46 64.155959 64.155959 13: seq: 13, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 47 64.156232 64.156232 13: seq: 14, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 48 64.156550 64.156550 13: seq: 15, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 49 64.156601 64.156601 13: seq: 16, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 50 64.156971 64.156971 13: seq: 17, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 51 64.157128 64.157128 13: seq: 18, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 52 64.199937 64.199937 28: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3716544100
Sent 53 64.250280 64.250280 21: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 54 64.299964 64.299964 28: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3756544082
Sent 55 64.350148 64.350148 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 56 64.399896 64.399896 28: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3796544092
Sent 57 64.449814 64.449814 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 58 64.500563 64.500563 28: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3836544092
Sent 59 64.550246 64.550246 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 60 64.571565 64.571565 6: seq: 11, get_clock
Sent 61 64.601123 64.601123 28: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3876544086
Sent 62 64.651013 64.651013 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 63 64.693713 64.693713 21: seq: 14, spi_send oid=1 data=b'o\x00\x00\x00\x00', spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 64 64.695178 64.695178 21: seq: 15, spi_send oid=1 data=b'\x01\x00\x00\x00\x00', spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 65 64.700127 64.700127 28: seq: 16, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3916544017
Sent 66 64.750894 64.750894 21: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 67 64.800842 64.800842 28: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3956544092
Sent 68 64.849728 64.849728 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 69 64.900536 64.900536 28: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=3996544084
Sent 70 64.950191 64.950191 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 71 65.000429 65.000429 28: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4036544092
Sent 72 65.050245 65.050245 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 73 65.100097 65.100097 28: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4076544094
Sent 74 65.150464 65.150464 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 75 65.156228 65.156228 13: seq: 10, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 76 65.156501 65.156501 13: seq: 11, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 77 65.157512 65.157512 13: seq: 12, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 78 65.157826 65.157826 13: seq: 13, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 79 65.158562 65.158562 13: seq: 14, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 80 65.158807 65.158807 13: seq: 15, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 81 65.159412 65.159412 13: seq: 16, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 82 65.159610 65.159610 13: seq: 17, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 83 65.200402 65.200402 28: seq: 18, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4116544088
Sent 84 65.250329 65.250329 21: seq: 19, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 85 65.300231 65.300231 28: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4156544094
Sent 86 65.350647 65.350647 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 87 65.400637 65.400637 28: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4196544088
Sent 88 65.449725 65.449725 21: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 89 65.500457 65.500457 27: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4236544086
Sent 90 65.550261 65.550261 21: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 91 65.555789 65.555789 6: seq: 10, get_clock
Sent 92 65.599732 65.599732 27: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=4276544092
Sent 93 65.650545 65.650545 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 94 65.694239 65.694239 13: seq: 13, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 95 65.694588 65.694588 13: seq: 14, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 96 65.695312 65.695312 13: seq: 15, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 97 65.695585 65.695585 13: seq: 16, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 98 65.699661 65.699661 27: seq: 17, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=21576800
Sent 99 65.707004 65.707004 6: seq: 18, emergency_stop
Dumping receive queue 100 messages
Receive: 0 61.155469 61.155315 13: seq: 1a, spi_transfer_response oid=2 response=b'\xf0\x00\x1f\x00\x99'
Receive: 1 61.155927 61.155785 13: seq: 1c, spi_transfer_response oid=2 response=b'\xb0\x00\x00\x00\x00'
Receive: 2 61.179642 61.155785 15: seq: 1c, analog_in_state oid=14 next_clock=2526196224 value=31266
Receive: 3 61.259650 61.155785 15: seq: 1c, analog_in_state oid=22 next_clock=2558196224 value=31293
Receive: 4 61.479664 61.155785 15: seq: 1c, analog_in_state oid=14 next_clock=2646196224 value=31274
Receive: 5 61.559627 61.155785 15: seq: 1c, analog_in_state oid=22 next_clock=2678196224 value=31291
Receive: 6 61.618558 61.618424 11: seq: 1e, clock clock=2584626105
Receive: 7 61.691980 61.691812 13: seq: 1f, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00b'
Receive: 8 61.692638 61.692475 13: seq: 10, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 9 61.780109 61.692475 15: seq: 10, analog_in_state oid=14 next_clock=2766196224 value=31274
Receive: 10 61.859673 61.692475 15: seq: 10, analog_in_state oid=22 next_clock=2798196224 value=31291
Receive: 11 62.064079 61.966296 14: seq: 12, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=2762822239
Receive: 12 62.064261 61.966296 14: seq: 12, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=2762840450
Receive: 13 62.064589 62.064426 10: seq: 13, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 14 62.064983 62.064813 10: seq: 15, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 15 62.065508 62.065371 9: seq: 16, stepper_position oid=12 pos=3976
Receive: 16 62.066082 62.065940 13: seq: 18, spi_transfer_response oid=2 response=b'<\x00\x00\x03\xc4'
Receive: 17 62.066631 62.066492 9: seq: 19, stepper_position oid=6 pos=-4024
Receive: 18 62.067170 62.067028 13: seq: 1b, spi_transfer_response oid=0 response=b'<\x00\x00\x01\xc4'
Receive: 19 62.067693 62.067553 14: seq: 1c, endstop_state oid=4 homing=0 next_clock=2763221922 pin_value=1
Receive: 20 62.079625 62.071080 15: seq: 1e, analog_in_state oid=14 next_clock=2886196224 value=31275
Receive: 21 62.155118 62.154933 13: seq: 10, spi_transfer_response oid=0 response=b'<\x81\x1f\x00M'
Receive: 22 62.155707 62.155551 13: seq: 12, spi_transfer_response oid=2 response=b'<\x81\x1f\x00a'
Receive: 23 62.155928 62.155696 13: seq: 13, spi_transfer_response oid=0 response=b'<\x00\x00\x00\x00'
Receive: 24 62.156507 62.156280 13: seq: 15, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 25 62.159631 62.156280 15: seq: 15, analog_in_state oid=22 next_clock=2918196224 value=31300
Receive: 26 62.379684 62.156280 15: seq: 15, analog_in_state oid=14 next_clock=3006196224 value=31270
Receive: 27 62.459620 62.156280 15: seq: 15, analog_in_state oid=22 next_clock=3038196224 value=31298
Receive: 28 62.603162 62.602973 11: seq: 16, clock clock=2978464621
Receive: 29 62.679619 62.602973 15: seq: 16, analog_in_state oid=14 next_clock=3126196224 value=31276
Receive: 30 62.692505 62.692341 13: seq: 18, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00a'
Receive: 31 62.693116 62.692963 13: seq: 1a, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 32 62.759617 62.692963 15: seq: 1a, analog_in_state oid=22 next_clock=3158196224 value=31295
Receive: 33 62.979609 62.900975 15: seq: 1b, analog_in_state oid=14 next_clock=3246196224 value=31272
Receive: 34 63.059590 63.050177 15: seq: 1d, analog_in_state oid=22 next_clock=3278196224 value=31293
Receive: 35 63.155643 63.155495 13: seq: 12, spi_transfer_response oid=0 response=b'\xbc\x81\x1f\x00\\'
Receive: 36 63.155973 63.155727 13: seq: 14, spi_transfer_response oid=2 response=b'<\x81\x1f\x00c'
Receive: 37 63.156572 63.156354 13: seq: 16, spi_transfer_response oid=0 response=b'\xbc\x00\x00\x00\x00'
Receive: 38 63.157020 63.156782 13: seq: 18, spi_transfer_response oid=2 response=b'<\x00\x00\x00\x00'
Receive: 39 63.198307 63.156782 14: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3216544020
Receive: 40 63.279615 63.249939 15: seq: 1a, analog_in_state oid=14 next_clock=3366196224 value=31272
Receive: 41 63.298300 63.249939 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3256544092
Receive: 42 63.359606 63.350579 15: seq: 1c, analog_in_state oid=22 next_clock=3398196224 value=31296
Receive: 43 63.398307 63.350579 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3296544086
Receive: 44 63.498300 63.450207 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3336544017
Receive: 45 63.579595 63.549832 15: seq: 10, analog_in_state oid=14 next_clock=3486196224 value=31271
Receive: 46 63.587122 63.586992 11: seq: 11, clock clock=3372069047
Receive: 47 63.598359 63.586992 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3376544090
Receive: 48 63.659580 63.649676 15: seq: 13, analog_in_state oid=22 next_clock=3518196224 value=31295
Receive: 49 63.693171 63.693025 13: seq: 15, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00X'
Receive: 50 63.693764 63.693612 13: seq: 17, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 51 63.698290 63.693612 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3416544013
Receive: 52 63.798331 63.749836 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3456544096
Receive: 53 63.879602 63.850534 15: seq: 1b, analog_in_state oid=14 next_clock=3606196224 value=31269
Receive: 54 63.898291 63.850534 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3496544100
Receive: 55 63.959591 63.950276 15: seq: 1d, analog_in_state oid=22 next_clock=3638196224 value=31295
Receive: 56 63.998314 63.950276 14: seq: 1d, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3536544092
Receive: 57 64.098374 64.050337 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3576544092
Receive: 58 64.155966 64.155839 13: seq: 13, spi_transfer_response oid=0 response=b'\xb0\x00\x1f\x00/'
Receive: 59 64.156398 64.156232 13: seq: 15, spi_transfer_response oid=2 response=b'p\x00\x1f\x00\x1d'
Receive: 60 64.156833 64.156601 13: seq: 17, spi_transfer_response oid=0 response=b'\xb0\x00\x00\x00\x00'
Receive: 61 64.157338 64.157128 13: seq: 19, spi_transfer_response oid=2 response=b'0\x00\x00\x00\x00'
Receive: 62 64.179639 64.157128 15: seq: 19, analog_in_state oid=14 next_clock=3726196224 value=31273
Receive: 63 64.198293 64.157128 14: seq: 19, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3616544100
Receive: 64 64.259644 64.250280 15: seq: 1b, analog_in_state oid=22 next_clock=3758196224 value=31296
Receive: 65 64.298410 64.250280 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3656544082
Receive: 66 64.398395 64.350148 14: seq: 1d, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3696544092
Receive: 67 64.479633 64.449814 15: seq: 1f, analog_in_state oid=14 next_clock=3846196224 value=31269
Receive: 68 64.498354 64.449814 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3736544092
Receive: 69 64.559631 64.550246 15: seq: 11, analog_in_state oid=22 next_clock=3878196224 value=31291
Receive: 70 64.571788 64.571565 11: seq: 12, clock clock=3765917068
Receive: 71 64.598372 64.571565 14: seq: 12, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3776544086
Receive: 72 64.693966 64.693713 13: seq: 15, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00]'
Receive: 73 64.695434 64.695178 13: seq: 16, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 74 64.698349 64.695178 14: seq: 16, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3816544017
Receive: 75 64.779691 64.750894 15: seq: 18, analog_in_state oid=14 next_clock=3966196224 value=31270
Receive: 76 64.798379 64.750894 14: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3856544092
Receive: 77 64.859690 64.849728 15: seq: 1a, analog_in_state oid=22 next_clock=3998196224 value=31293
Receive: 78 64.898375 64.849728 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3896544084
Receive: 79 64.998381 64.950191 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3936544092
Receive: 80 65.079633 65.050245 15: seq: 1e, analog_in_state oid=14 next_clock=4086196224 value=31272
Receive: 81 65.098318 65.050245 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=3976544094
Receive: 82 65.156744 65.156501 13: seq: 12, spi_transfer_response oid=0 response=b'\xf0\x00\x1f\x00='
Receive: 83 65.158027 65.157826 13: seq: 14, spi_transfer_response oid=2 response=b'0\x00\x1f\x00\x1e'
Receive: 84 65.159024 65.158807 13: seq: 16, spi_transfer_response oid=0 response=b'\xb0\x00\x00\x00\x00'
Receive: 85 65.159624 65.159412 15: seq: 17, analog_in_state oid=22 next_clock=4118196224 value=31292
Receive: 86 65.159966 65.159610 13: seq: 18, spi_transfer_response oid=2 response=b'p\x00\x00\x00\x00'
Receive: 87 65.198462 65.159610 14: seq: 18, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4016544088
Receive: 88 65.298363 65.250329 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4056544094
Receive: 89 65.379662 65.350647 15: seq: 1c, analog_in_state oid=14 next_clock=4206196224 value=31270
Receive: 90 65.398447 65.350647 14: seq: 1c, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4096544088
Receive: 91 65.459636 65.449725 14: seq: 1e, analog_in_state oid=22 next_clock=4238196224 value=31291
Receive: 92 65.498363 65.449725 14: seq: 1e, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4136544086
Receive: 93 65.555991 65.555789 11: seq: 11, clock clock=4159613702
Receive: 94 65.598344 65.555789 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4176544092
Receive: 95 65.679678 65.650545 14: seq: 13, analog_in_state oid=14 next_clock=31228928 value=31274
Receive: 96 65.694735 65.694588 13: seq: 15, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00N'
Receive: 97 65.695737 65.695585 13: seq: 17, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 98 65.698357 65.695585 14: seq: 17, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=4216544096
Receive: 99 65.707246 65.707004 12: seq: 19, shutdown clock=4220108132 static_string_id=Command request
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (29.49682763, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=2853556355 clock_est=(41.524 1676219947 49999984.140) min_half_rtt=0.000059 min_rtt_time=54.240 time_avg=41.524(307.117) clock_avg=1676219947.201(15355843871.008) pred_variance=332131052.687 clock_adj=(17.266 49998937.750)
Dumping serial stats: bytes_write=1114 bytes_read=5431 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 14.389475 14.389475 9: seq: 1d, identify offset=1800 count=40
Sent 1 14.390259 14.390259 9: seq: 1e, identify offset=1840 count=40
Sent 2 14.391132 14.391132 9: seq: 1f, identify offset=1880 count=40
Sent 3 14.391636 14.391636 9: seq: 10, identify offset=1920 count=40
Sent 4 14.392090 14.392090 9: seq: 11, identify offset=1960 count=40
Sent 5 14.392518 14.392518 9: seq: 12, identify offset=2000 count=40
Sent 6 14.392921 14.392921 9: seq: 13, identify offset=2040 count=40
Sent 7 14.393340 14.393340 9: seq: 14, identify offset=2080 count=40
Sent 8 14.393738 14.393738 9: seq: 15, identify offset=2120 count=40
Sent 9 14.394127 14.394127 9: seq: 16, identify offset=2160 count=40
Sent 10 14.394515 14.394515 9: seq: 17, identify offset=2200 count=40
Sent 11 14.394907 14.394907 9: seq: 18, identify offset=2240 count=40
Sent 12 14.395451 14.395451 9: seq: 19, identify offset=2280 count=40
Sent 13 14.397901 14.397901 9: seq: 1a, identify offset=2320 count=40
Sent 14 14.398786 14.398786 9: seq: 1b, identify offset=2360 count=40
Sent 15 14.399497 14.399497 9: seq: 1c, identify offset=2400 count=40
Sent 16 14.400528 14.400528 9: seq: 1d, identify offset=2440 count=40
Sent 17 14.401482 14.401482 9: seq: 1e, identify offset=2480 count=40
Sent 18 14.402213 14.402213 9: seq: 1f, identify offset=2520 count=40
Sent 19 14.402858 14.402858 9: seq: 10, identify offset=2560 count=40
Sent 20 14.403466 14.403466 9: seq: 11, identify offset=2600 count=40
Sent 21 14.403951 14.403951 9: seq: 12, identify offset=2640 count=40
Sent 22 14.404632 14.404632 9: seq: 13, identify offset=2680 count=40
Sent 23 14.405276 14.405276 9: seq: 14, identify offset=2720 count=40
Sent 24 14.405878 14.405878 9: seq: 15, identify offset=2760 count=40
Sent 25 14.406386 14.406386 9: seq: 16, identify offset=2800 count=40
Sent 26 14.406808 14.406808 9: seq: 17, identify offset=2840 count=40
Sent 27 14.407218 14.407218 9: seq: 18, identify offset=2880 count=40
Sent 28 14.407622 14.407622 9: seq: 19, identify offset=2920 count=40
Sent 29 14.408073 14.408073 9: seq: 1a, identify offset=2960 count=40
Sent 30 14.408630 14.408630 9: seq: 1b, identify offset=3000 count=40
Sent 31 14.409049 14.409049 9: seq: 1c, identify offset=3040 count=40
Sent 32 14.409452 14.409452 9: seq: 1d, identify offset=3080 count=40
Sent 33 14.409849 14.409849 9: seq: 1e, identify offset=3120 count=40
Sent 34 14.410245 14.410245 9: seq: 1f, identify offset=3137 count=40
Sent 35 14.444936 14.444936 6: seq: 10, get_uptime
Sent 36 14.496290 14.496290 6: seq: 11, get_clock
Sent 37 14.547308 14.547308 6: seq: 12, get_clock
Sent 38 14.598460 14.598460 6: seq: 13, get_clock
Sent 39 14.649516 14.649516 6: seq: 14, get_clock
Sent 40 14.700747 14.700747 6: seq: 15, get_clock
Sent 41 14.752377 14.752377 6: seq: 16, get_clock
Sent 42 14.803582 14.803582 6: seq: 17, get_clock
Sent 43 14.855008 14.855008 6: seq: 18, get_clock
Sent 44 14.857257 14.857257 6: seq: 19, get_clock
Sent 45 14.872356 14.872356 6: seq: 1a, get_config
Sent 46 14.873764 14.873764 7: seq: 1b, allocate_oids count=0
Sent 47 14.873923 14.873923 12: seq: 1c, finalize_config crc=3912464276, get_config
Sent 48 15.842232 15.842232 6: seq: 1d, get_clock
Sent 49 16.826242 16.826242 6: seq: 1e, get_clock
Sent 50 17.811343 17.811343 6: seq: 1f, get_clock
Sent 51 18.796249 18.796249 6: seq: 10, get_clock
Sent 52 19.780703 19.780703 6: seq: 11, get_clock
Sent 53 20.765687 20.765687 6: seq: 12, get_clock
Sent 54 21.749299 21.749299 6: seq: 13, get_clock
Sent 55 22.734072 22.734072 6: seq: 14, get_clock
Sent 56 23.718425 23.718425 6: seq: 15, get_clock
Sent 57 24.702826 24.702826 6: seq: 16, get_clock
Sent 58 25.687713 25.687713 6: seq: 17, get_clock
Sent 59 26.672167 26.672167 6: seq: 18, get_clock
Sent 60 27.656511 27.656511 6: seq: 19, get_clock
Sent 61 28.640797 28.640797 6: seq: 1a, get_clock
Sent 62 29.625632 29.625632 6: seq: 1b, get_clock
Sent 63 30.609827 30.609827 6: seq: 1c, get_clock
Sent 64 31.594088 31.594088 6: seq: 1d, get_clock
Sent 65 32.578265 32.578265 6: seq: 1e, get_clock
Sent 66 33.562607 33.562607 6: seq: 1f, get_clock
Sent 67 34.547694 34.547694 6: seq: 10, get_clock
Sent 68 35.531951 35.531951 6: seq: 11, get_clock
Sent 69 36.516894 36.516894 6: seq: 12, get_clock
Sent 70 37.501774 37.501774 6: seq: 13, get_clock
Sent 71 38.486845 38.486845 6: seq: 14, get_clock
Sent 72 39.471639 39.471639 6: seq: 15, get_clock
Sent 73 40.456893 40.456893 6: seq: 16, get_clock
Sent 74 41.441771 41.441771 6: seq: 17, get_clock
Sent 75 42.426256 42.426256 6: seq: 18, get_clock
Sent 76 43.410793 43.410793 6: seq: 19, get_clock
Sent 77 44.395496 44.395496 6: seq: 1a, get_clock
Sent 78 45.380101 45.380101 6: seq: 1b, get_clock
Sent 79 46.364414 46.364414 6: seq: 1c, get_clock
Sent 80 47.349354 47.349354 6: seq: 1d, get_clock
Sent 81 48.333627 48.333627 6: seq: 1e, get_clock
Sent 82 49.318608 49.318608 6: seq: 1f, get_clock
Sent 83 50.302764 50.302764 6: seq: 10, get_clock
Sent 84 51.287361 51.287361 6: seq: 11, get_clock
Sent 85 52.271826 52.271826 6: seq: 12, get_clock
Sent 86 53.256181 53.256181 6: seq: 13, get_clock
Sent 87 54.240447 54.240447 6: seq: 14, get_clock
Sent 88 55.224439 55.224439 6: seq: 15, get_clock
Sent 89 56.209285 56.209285 6: seq: 16, get_clock
Sent 90 57.194189 57.194189 6: seq: 17, get_clock
Sent 91 58.178782 58.178782 6: seq: 18, get_clock
Sent 92 59.163542 59.163542 6: seq: 19, get_clock
Sent 93 60.148480 60.148480 6: seq: 1a, get_clock
Sent 94 61.132787 61.132787 6: seq: 1b, get_clock
Sent 95 62.117586 62.117586 6: seq: 1c, get_clock
Sent 96 63.101761 63.101761 6: seq: 1d, get_clock
Sent 97 64.086599 64.086599 6: seq: 1e, get_clock
Sent 98 65.070943 65.070943 6: seq: 1f, get_clock
Sent 99 65.719462 65.719462 6: seq: 10, emergency_stop
Dumping receive queue 100 messages
Receive: 0 14.394247 14.394127 49: seq: 17, identify_response offset=2160 data=b'\xbc\xbd\xb1\xa9g\x82}\xb4\x9e\xcd\xeb\xf2G]#\xed\x9cxB\x9a\x957\x1e\x0e6\tn\x8aG\xd4\xdd\x8d\x9175\xe8n\xa0</'
Receive: 1 14.394635 14.394515 49: seq: 18, identify_response offset=2200 data=b"\x0e\x9c\xf1\xb6\x84\xf4\xd0\x18(\xf0r#\xa4\xe4\xb0%\x94\x9a\xd5T\xa3\xbe\x011f\xe5L'*\xca\x18\xf8=\xc7\x8b\xc2\x84\xfcy\x82"
Receive: 2 14.395028 14.394907 49: seq: 19, identify_response offset=2240 data=b'c1T\xcaCil\xecO=\x8fm\xe4\xa2\x91\xf1\xb1\xe2\x06\xafR\x952\x0cF\xc3\xbe\xee\x1e\xa8x\xfa\x95\xeb\x05`)4\xa0A'
Receive: 3 14.395646 14.395451 49: seq: 1a, identify_response offset=2280 data=b'Y\x1cx\xd3\xbe@\x9f\x82\xcd\x8b[\x8bp\xc27{\x10\xe0\x97\xf9c\xc9\x01\xea\xb7])\x17u\x943\x96>C\x85\x15\x97GeN'
Receive: 4 14.398108 14.397901 49: seq: 1b, identify_response offset=2320 data=b'\xfc\x19\nL\x12o\xf9\xa8\xefD\xb1\x8d\x18\xa2\x99\x1a3gl\x01\xcfb\xed\x1a\x1bA\xb0\x98\xf2\xbb\xca\x9d\xf9\x0f)\xb7\xda\x11\x8f]'
Receive: 5 14.398974 14.398786 49: seq: 1c, identify_response offset=2360 data=b'\xc7\xf6\x85\x92\t\xc9\x03\xfb^\xef}\x15\xd1~O\xb5\xa0\xa9M\xfc^I\x11)\xc1-I\xae\xfax\xef\xe1\x0bt\xff\t{E\xdaw'
Receive: 6 14.399691 14.399497 49: seq: 1d, identify_response offset=2400 data=b'Hz\x14\xb2\x10\xd4X\x0b\xc1L\xffC[\xdca4\xea\xb4"+i\x10\x06\xb5\xba\x1c\x02h\x02\\,\xae\x00\t\xd3XSC\xc7\x81'
Receive: 7 14.400713 14.400528 49: seq: 1e, identify_response offset=2440 data=b"\x95\xc7Y\xfa.j\xa2.\x90\x8a\xaat\xe0\xd5)X\xc7\x02\x1b\x89\rn\xb29\xc1u'\xa52i\t\xf69\x02\xed\xe5\xd4\xdeZ`"
Receive: 8 14.401678 14.401482 49: seq: 1f, identify_response offset=2480 data=b"\xa1\xa2\x9d\xa0e'hNv\xf4\xca\xe4\xc0*\x1a\xcdX\x89|0\x86\xdf\xdbwoTaG\x9d\xadS\x98\xec9&\ri\xba\x04\xb6"
Receive: 9 14.402377 14.402213 49: seq: 10, identify_response offset=2520 data=b']\xfb\xf2\x0e#\x8f\xb2\xbd\x05\x173&\xb5\x034R\xd3\xfe*\x9d\xdd!5\xf5p\xe9^PkZ\xc3\x080;\x03\xdc\xaez\xb9\xcc'
Receive: 10 14.403021 14.402858 49: seq: 11, identify_response offset=2560 data=b'\xcb\xe3\xd4~\x04\xe5\x83T\xa5\xa2\x071o^:\x00pC^O\x07Yt\xeaPlIVJ\xa6*\x8ed5\x7f!\x81\xf3\xd4\x90'
Receive: 11 14.403618 14.403466 49: seq: 12, identify_response offset=2600 data=b'\xc7\xdc\xc3\x02\xc4\x84JO\xac\x89lO\x1a\xad;\xf6\x16\xf2!(s\xee\xb0J\xdbc\xa3]\xfe\x8d\x8aA\xf5\xb6jS#\xfd\xe2Z'
Receive: 12 14.404164 14.403951 49: seq: 13, identify_response offset=2640 data=b'Q\xf7\\b\xbb\x12=<\xf9\x9e\x12\xc0\x08\xc2\xb2\x1a\x922\xf5\x18\xf6\xf3\xd5\xf5O\xf4\xd0aZ\xfd\xaa:F\x03\xab\x8b\x01\xb3\x08\xec'
Receive: 13 14.404804 14.404632 49: seq: 14, identify_response offset=2680 data=b'\x06\x9c)\x01\xd1\xaa\xc9\xa9\xe3\xc3\x89N\xaa\xc8\tb\xe1\x0b\xe9\xe7\xc9\xe3\x02\xe6\x9fP\xcf\xc5\xe1&MU\xc2\xad?2\x95q\xd3G'
Receive: 14 14.405444 14.405276 49: seq: 15, identify_response offset=2720 data=b'\x96*\x17\x01\x1fY\xb6\x86q\xfc\xe9\x93j\xf8@\xba"9\xbd*\xeb6\xa7_\xc5K\x0c\xa3m\xc9\x17\xcd\xd4\x97\xe8P\xce\xb6E]'
Receive: 15 14.406034 14.405878 49: seq: 16, identify_response offset=2760 data=b'CJ\xf7\xddL\x9dL}\x1d\x7f\xb9\xbbi\xbf\xe7\xe0\xcc\x90j/\xf6\x1d\xfe\xd6\xc2{;\xc6\xc6\xcbKLFm\x7fu\xd6\xce\xa7%'
Receive: 16 14.406517 14.406386 49: seq: 17, identify_response offset=2800 data=b'\xcf5\xc0\xb046\xcf\xd63\x8a\xc2k\x9e2\x05\xd1\xe7\xc1\xc8D\xe9\x98\xeb\x08l\xec\xe3\x19x*\xfd\x12\xa0N\xa8\x1e\x0cp\xceh'
Receive: 17 14.406935 14.406808 49: seq: 18, identify_response offset=2840 data=b'\x96j\xc4@\x80\xf2\x19\xdfl\x91Z\xf5d?\xc7\xb5\xa6\xd0\x83\xdc\xed\xfe\x12\xe3\xbfy\xa5\x91\xe0\xa6\xed\xa3\xcb\x16\xeeT7k\r\xe8'
Receive: 18 14.407343 14.407218 49: seq: 19, identify_response offset=2880 data=b's\x02\x11\xe4\xe5iQl\x9c\x98\x07\x92\x19W\xc7\xae\x01\x7fp\xba\x88\xff\xfe\x02[\xc7\xee\xcd!7\xca\xe3\xba\x1b\xf4mD\xea\xf5\xf5'
Receive: 19 14.407745 14.407622 49: seq: 1a, identify_response offset=2920 data=b"=\\\xdb\xe0'm\xbaD\\|\xa0p\xd2d\xcb\xf2J\x0b\x14T\xce\xf4\x89\xbfDE1\x92\x9f\xed+\xff%\x15\x9d\xce\xa9\xe8\xca{"
Receive: 20 14.408247 14.408073 49: seq: 1b, identify_response offset=2960 data=b'\x87\x98\xdf\x88\x9c\xcaR\xbd\x83\x94\x88\x07\xc2\x07)\xf8Oq[t&.\xb8\x9bW\x83\xf3\x02H\xfd*\xfb\x8b\xac4\xf4)\xbc>\x99'
Receive: 21 14.408760 14.408630 49: seq: 1c, identify_response offset=3000 data=b'O\x80x\xd1\xb9\xee\xe6\xc9\x05\xfb\xfdr\xff\xa61\xf9\xf6\xdb\x89\x7f\xaa\x19\x91*\xa1\x87Q\x95\x11\x9b\x98\nj\xe9lAN\x8d\xfe\x91'
Receive: 22 14.409174 14.409049 49: seq: 1d, identify_response offset=3040 data=b"\xbf\x93)f\xaeC\xb8h\x1f\xd2S\x0f\xc4\x1e\xa8\xce\xe7\x9e\xf1\x0blc2\xb6\xa1\xae'sM\xc5\xd3\x13`;\x91N\xbb\xf5\x1b\x85"
Receive: 23 14.409576 14.409452 49: seq: 1e, identify_response offset=3080 data=b'\xce\x82\xca\xc2v-\xcf\xbeNz\x9ee\xab<\xbf*\xa0\xe9\xa9~\xf2\xdd\xce\x1a\x1c\xb3\xfeg\xa2`\x17\xdc\xaf.\xc3\xf0r\x05BN'
Receive: 24 14.409973 14.409849 26: seq: 1f, identify_response offset=3120 data=b"_\x1e\xee\xb6Q\xb2\xde\x84\xab\xe0\xd3\x7f\x01'\xd3\x1e\x16"
Receive: 25 14.410366 14.410245 9: seq: 10, identify_response offset=3137 data=b''
Receive: 26 14.445128 14.444936 12: seq: 11, uptime high=0 clock=322251672
Receive: 27 14.496488 14.496290 11: seq: 12, clock clock=324819439
Receive: 28 14.547516 14.547308 11: seq: 13, clock clock=327370648
Receive: 29 14.598656 14.598460 11: seq: 14, clock clock=329927498
Receive: 30 14.649839 14.649516 11: seq: 15, clock clock=332486993
Receive: 31 14.701444 14.700747 11: seq: 16, clock clock=335046823
Receive: 32 14.752619 14.752377 11: seq: 17, clock clock=337625649
Receive: 33 14.803858 14.803582 11: seq: 18, clock clock=340186055
Receive: 34 14.855215 14.855008 11: seq: 19, clock clock=342755968
Receive: 35 14.857518 14.857257 11: seq: 1a, clock clock=342867807
Receive: 36 14.872560 14.872356 10: seq: 1b, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 37 14.874065 14.873923 15: seq: 1d, config is_config=1 crc=3912464276 is_shutdown=0 move_count=1024
Receive: 38 15.842548 15.842232 11: seq: 1e, clock clock=392122436
Receive: 39 16.826544 16.826242 11: seq: 1f, clock clock=441322581
Receive: 40 17.811691 17.811343 11: seq: 10, clock clock=490578326
Receive: 41 18.000251 17.811343 14: seq: 10, stats count=146 sum=174580 sumsq=1177804
Receive: 42 18.796442 18.796249 11: seq: 11, clock clock=539818453
Receive: 43 19.780871 19.780703 11: seq: 12, clock clock=589040142
Receive: 44 20.765882 20.765687 11: seq: 13, clock clock=638290670
Receive: 45 21.749457 21.749299 11: seq: 14, clock clock=687469643
Receive: 46 22.734236 22.734072 11: seq: 15, clock clock=736708399
Receive: 47 23.100249 22.734072 13: seq: 15, stats count=56 sum=18328 sumsq=88612
Receive: 48 23.718621 23.718425 11: seq: 16, clock clock=785927194
Receive: 49 24.703005 24.702826 11: seq: 17, clock clock=835146981
Receive: 50 25.687885 25.687713 11: seq: 18, clock clock=884391088
Receive: 51 26.672337 26.672167 11: seq: 19, clock clock=933613550
Receive: 52 27.656666 27.656511 11: seq: 1a, clock clock=982830374
Receive: 53 28.200139 27.656511 13: seq: 1a, stats count=56 sum=17961 sumsq=83640
Receive: 54 28.640936 28.640797 11: seq: 1b, clock clock=1032044067
Receive: 55 29.625821 29.625632 11: seq: 1c, clock clock=1081287203
Receive: 56 30.609965 30.609827 11: seq: 1d, clock clock=1130495469
Receive: 57 31.594251 31.594088 11: seq: 1e, clock clock=1179709433
Receive: 58 32.578425 32.578265 11: seq: 1f, clock clock=1228918047
Receive: 59 33.200174 32.578265 13: seq: 1f, stats count=55 sum=15695 sumsq=78695
Receive: 60 33.562754 33.562607 11: seq: 10, clock clock=1278134847
Receive: 61 34.548057 34.547694 11: seq: 11, clock clock=1327393725
Receive: 62 35.532194 35.531951 11: seq: 12, clock clock=1376605722
Receive: 63 36.517077 36.516894 11: seq: 13, clock clock=1425850340
Receive: 64 37.501923 37.501774 11: seq: 14, clock clock=1475093198
Receive: 65 38.300152 37.501774 13: seq: 14, stats count=56 sum=18532 sumsq=123079
Receive: 66 38.487005 38.486845 11: seq: 15, clock clock=1524347186
Receive: 67 39.471795 39.471639 11: seq: 16, clock clock=1573586716
Receive: 68 40.457277 40.456893 11: seq: 17, clock clock=1622856445
Receive: 69 41.441940 41.441771 11: seq: 18, clock clock=1672093828
Receive: 70 42.426382 42.426256 11: seq: 19, clock clock=1721316525
Receive: 71 43.300156 42.426256 13: seq: 19, stats count=55 sum=17094 sumsq=105941
Receive: 72 43.410912 43.410793 11: seq: 1a, clock clock=1770542927
Receive: 73 44.395627 44.395496 11: seq: 1b, clock clock=1819778506
Receive: 74 45.380229 45.380101 11: seq: 1c, clock clock=1869008678
Receive: 75 46.364750 46.364414 11: seq: 1d, clock clock=1918231102
Receive: 76 47.349528 47.349354 11: seq: 1e, clock clock=1967473118
Receive: 77 48.333791 48.333627 11: seq: 1f, clock clock=2016685952
Receive: 78 48.333820 48.333627 13: seq: 1f, stats count=56 sum=18734 sumsq=107884
Receive: 79 49.318769 49.318608 11: seq: 10, clock clock=2065935241
Receive: 80 50.302903 50.302764 11: seq: 11, clock clock=2115142147
Receive: 81 51.287505 51.287361 11: seq: 12, clock clock=2164372396
Receive: 82 52.272161 52.271826 11: seq: 13, clock clock=2213599718
Receive: 83 53.256369 53.256181 11: seq: 14, clock clock=2262814948
Receive: 84 53.400228 53.256181 13: seq: 14, stats count=56 sum=20507 sumsq=189378
Receive: 85 54.240566 54.240447 11: seq: 15, clock clock=2312025614
Receive: 86 55.224573 55.224439 11: seq: 16, clock clock=2361224812
Receive: 87 56.209419 56.209285 11: seq: 17, clock clock=2410467117
Receive: 88 57.194332 57.194189 11: seq: 18, clock clock=2459713662
Receive: 89 58.178932 58.178782 11: seq: 19, clock clock=2508942706
Receive: 90 58.400267 58.178782 13: seq: 19, stats count=55 sum=15975 sumsq=66518
Receive: 91 59.163802 59.163542 11: seq: 1a, clock clock=2558184948
Receive: 92 60.148636 60.148480 11: seq: 1b, clock clock=2607428548
Receive: 93 61.132945 61.132787 11: seq: 1c, clock clock=2656643295
Receive: 94 62.117724 62.117586 11: seq: 1d, clock clock=2705883446
Receive: 95 63.101894 63.101761 11: seq: 1e, clock clock=2755091801
Receive: 96 63.500113 63.101761 13: seq: 1e, stats count=56 sum=17784 sumsq=89653
Receive: 97 64.086759 64.086599 11: seq: 1f, clock clock=2804334832
Receive: 98 65.071279 65.070943 11: seq: 10, clock clock=2853556355
Receive: 99 65.719709 65.719462 12: seq: 11, shutdown clock=2885979575 static_string_id=Command request
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=29946727399 p=-19775 i=40000 c=-500 a=0
queue_step 1: t=29966727399 p=-20275 i=40000 c=-500 a=0
queue_step 2: t=29986727399 p=-20775 i=40000 c=-500 a=0
queue_step 3: t=30006727399 p=-21275 i=40000 c=-500 a=0
queue_step 4: t=30026727399 p=-21775 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=29946767410 p=19824 i=40000 c=500 a=0
queue_step 1: t=29966767410 p=20324 i=40000 c=500 a=0
queue_step 2: t=29986767410 p=20824 i=40000 c=500 a=0
queue_step 3: t=30006767410 p=21324 i=40000 c=500 a=0
queue_step 4: t=30026767410 p=21824 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=72.491869 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 74.974780: (117.5, 92.5, 289.6417226875003)
Stats 66.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000007 bytes_write=14259 bytes_read=18431 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008209 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1114 bytes_read=5431 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999984 adj=49998937  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.71 cputime=2.784 memavail=3328676 print_time=75.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Homing failed due to printer shutdown
Stats 67.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14597 bytes_read=18872 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008187 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1120 bytes_read=5447 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999986 adj=49999067  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.71 cputime=2.805 memavail=3328300 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 68.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14616 bytes_read=18990 bytes_retransmit=9 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008209 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=1126 bytes_read=5463 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49999098  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.71 cputime=2.813 memavail=3328300 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 69.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14622 bytes_read=19111 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1132 bytes_read=5492 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999989 adj=49999059  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.71 cputime=2.820 memavail=3328300 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 70.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14628 bytes_read=19232 bytes_retransmit=9 bytes_invalid=0 send_seq=859 receive_seq=859 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1138 bytes_read=5508 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999999 adj=49999048  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.71 cputime=2.828 memavail=3327836 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 71.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000005 bytes_write=14634 bytes_read=19338 bytes_retransmit=9 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008207 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1150 bytes_read=5540 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999991 adj=49999144  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.65 cputime=2.839 memavail=3327836 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 72.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14640 bytes_read=19473 bytes_retransmit=9 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008222 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1156 bytes_read=5556 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999967 adj=49998995  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.65 cputime=2.853 memavail=3327836 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 73.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14646 bytes_read=19594 bytes_retransmit=9 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008277 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=1162 bytes_read=5572 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999927 adj=49998706  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.65 cputime=2.866 memavail=3327836 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 74.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14652 bytes_read=19700 bytes_retransmit=9 bytes_invalid=0 send_seq=863 receive_seq=863 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008298 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1168 bytes_read=5601 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999877 adj=49998252  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.65 cputime=2.879 memavail=3327836 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 75.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14658 bytes_read=19821 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008312 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1174 bytes_read=5617 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999817 adj=49997830  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.65 cputime=2.892 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 76.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14664 bytes_read=19942 bytes_retransmit=9 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008326 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1180 bytes_read=5633 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999751 adj=49997383  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.68 cputime=2.905 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 77.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14670 bytes_read=20057 bytes_retransmit=9 bytes_invalid=0 send_seq=866 receive_seq=866 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008343 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1186 bytes_read=5649 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999680 adj=49996960  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.68 cputime=2.918 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 78.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14676 bytes_read=20178 bytes_retransmit=9 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008356 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=1192 bytes_read=5665 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999603 adj=49996570  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.68 cputime=2.931 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 79.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14682 bytes_read=20299 bytes_retransmit=9 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008361 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1198 bytes_read=5694 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999520 adj=49996174  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.68 cputime=2.944 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 80.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14688 bytes_read=20405 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008418 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1204 bytes_read=5710 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999434 adj=49995800  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.68 cputime=2.956 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 81.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14694 bytes_read=20526 bytes_retransmit=9 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008417 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1210 bytes_read=5726 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999349 adj=49995384  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.62 cputime=2.969 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 82.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14700 bytes_read=20661 bytes_retransmit=9 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008412 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1216 bytes_read=5742 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999265 adj=49995132  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.62 cputime=2.983 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 83.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14706 bytes_read=20767 bytes_retransmit=9 bytes_invalid=0 send_seq=872 receive_seq=872 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008408 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=1222 bytes_read=5758 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999184 adj=49994928  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.62 cputime=2.995 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 84.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=14712 bytes_read=20888 bytes_retransmit=9 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008402 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1228 bytes_read=5787 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999102 adj=49994785  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.62 cputime=3.009 memavail=3328384 print_time=75.572 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-250-ge9534d6f-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:25:49 2023 (1690572349.4 13.7)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 547775454992: New connection
webhooks client 547775454992: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 17.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=3236 bytes_read=6182 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400011617 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50005274 adj=50009816  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=2.62 cputime=1.986 memavail=3332880 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547775454992
webhooks: registering remote method 'reboot_machine' for connection id: 547775454992
webhooks: registering remote method 'pause_job_queue' for connection id: 547775454992
webhooks: registering remote method 'start_job_queue' for connection id: 547775454992
Stats 18.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=3242 bytes_read=6288 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009671 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000943 adj=50001525  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.62 cputime=2.009 memavail=3359964 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 19.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=3248 bytes_read=6394 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009977 host: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=825 bytes_read=4539 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999945 adj=49995533  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.62 cputime=2.017 memavail=3356720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 20.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=3254 bytes_read=6530 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008913 host: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49994656  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.57 cputime=2.037 memavail=3329496 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 21.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000121 bytes_write=3260 bytes_read=6649 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008211 host: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999871 adj=49996028  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=2.57 cputime=2.045 memavail=3334368 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 22.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000121 bytes_write=3266 bytes_read=6755 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008031 host: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999794 adj=49996707  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.57 cputime=2.054 memavail=3344664 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 23.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000121 bytes_write=3272 bytes_read=6887 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007967 host: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999746 adj=49997106  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.57 cputime=2.062 memavail=3346964 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 24.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000121 bytes_write=3278 bytes_read=6993 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007906 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=855 bytes_read=4632 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999724 adj=49997416  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.57 cputime=2.070 memavail=3347044 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 25.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000121 bytes_write=3284 bytes_read=7099 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008223 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999783 adj=49997707  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.69 cputime=2.079 memavail=3323808 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 26.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3290 bytes_read=7249 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008740 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999817 adj=49998024  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.69 cputime=2.091 memavail=3336156 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 27.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3296 bytes_read=7355 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008534 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999827 adj=49998092  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.69 cputime=2.104 memavail=3328792 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 28.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3302 bytes_read=7461 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008743 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999819 adj=49998386  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=2.69 cputime=2.114 memavail=3333452 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 29.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3308 bytes_read=7597 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008638 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=885 bytes_read=4725 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999792 adj=49998343  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.69 cputime=2.123 memavail=3332400 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 30.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3314 bytes_read=7703 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008500 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999775 adj=49998381  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.55 cputime=2.129 memavail=3331920 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 31.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3320 bytes_read=7838 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008323 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999790 adj=49998495  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.55 cputime=2.138 memavail=3330288 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 32.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3326 bytes_read=7959 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008267 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999796 adj=49998641  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=2.55 cputime=2.145 memavail=3330400 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 33.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3332 bytes_read=8065 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008218 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999818 adj=49998727  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.55 cputime=2.155 memavail=3330408 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 34.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3338 bytes_read=8182 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008257 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=915 bytes_read=4818 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999858 adj=49998881  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.55 cputime=2.168 memavail=3330408 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 35.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3344 bytes_read=8303 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008412 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999888 adj=49999036  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.43 cputime=2.181 memavail=3330408 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 36.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3350 bytes_read=8423 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008427 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999938 adj=49999041  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.43 cputime=2.195 memavail=3330188 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 37.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3356 bytes_read=8544 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008451 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999937 adj=49999253  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.43 cputime=2.206 memavail=3327292 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 38.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3362 bytes_read=8665 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008401 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999968 adj=49999139  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.43 cputime=2.214 memavail=3328720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 39.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3368 bytes_read=8771 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008345 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=945 bytes_read=4898 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49999298  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.43 cputime=2.221 memavail=3328824 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 40.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3380 bytes_read=8908 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008267 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999938 adj=49999204  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.23 cputime=2.229 memavail=3328576 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 41.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3386 bytes_read=9043 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008247 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999932 adj=49999128  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.23 cputime=2.236 memavail=3328324 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 42.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3392 bytes_read=9149 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008265 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49999046  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.23 cputime=2.248 memavail=3328324 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 43.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3398 bytes_read=9270 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008284 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999950 adj=49999131  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.23 cputime=2.259 memavail=3331432 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 44.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3404 bytes_read=9388 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008238 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999940 adj=49999044  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.23 cputime=2.267 memavail=3331712 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 45.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3410 bytes_read=9492 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008197 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=981 bytes_read=5020 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999932 adj=49998987  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.05 cputime=2.274 memavail=3331476 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 46.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3416 bytes_read=9627 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008202 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=987 bytes_read=5036 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999929 adj=49998943  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.05 cputime=2.282 memavail=3332012 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 47.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3422 bytes_read=9748 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008192 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=993 bytes_read=5052 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999922 adj=49998903  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.05 cputime=2.289 memavail=3332012 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 48.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3428 bytes_read=9854 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008349 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=999 bytes_read=5068 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999931 adj=49998861  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.05 cputime=2.299 memavail=3332012 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 49.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3434 bytes_read=9975 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008322 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=1005 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999972 adj=49998791  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=2.05 cputime=2.311 memavail=3334096 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 50.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3440 bytes_read=10096 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008295 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=1011 bytes_read=5113 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999964 adj=49999164  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=1.89 cputime=2.319 memavail=3333284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 188.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=4280 bytes_read=26459 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008242 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=1851 bytes_read=7691 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999563 adj=49998021  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.40 cputime=4.105 memavail=3330308 print_time=197.975 buffer_time=0.312 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Attempting MCU 'mcu' reset command
Attempting MCU 'host' config_reset command
b'Got EOF when reading from device'
webhooks client 547775454992: Disconnected
Restarting printer
Start printer at Fri Jul 28 16:29:38 2023 (1690572578.2 189.8)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00'
webhooks client 547748255632: New connection
webhooks client 547748255632: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 197.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3041 bytes_read=5958 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006514 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49994386 adj=49983290  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.41 cputime=5.075 memavail=3328124 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 547748255632
webhooks: registering remote method 'reboot_machine' for connection id: 547748255632
webhooks: registering remote method 'pause_job_queue' for connection id: 547748255632
webhooks: registering remote method 'start_job_queue' for connection id: 547748255632
Stats 198.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3047 bytes_read=6079 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006008 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49996881 adj=49996902  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.41 cputime=5.100 memavail=3327632 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 199.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3053 bytes_read=6185 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006074 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=825 bytes_read=4540 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49997884 adj=50000069  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.41 cputime=5.115 memavail=3326624 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 200.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000105 bytes_write=3059 bytes_read=6317 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400006431 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=831 bytes_read=4556 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49998380 adj=50000908  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.38 cputime=5.124 memavail=3326632 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 201.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000105 bytes_write=3065 bytes_read=6434 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007005 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=837 bytes_read=4572 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999131 adj=50000890  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.38 cputime=5.137 memavail=3327372 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 202.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000105 bytes_write=3071 bytes_read=6540 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008232 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=843 bytes_read=4588 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999284 adj=50001621  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.38 cputime=5.154 memavail=3327640 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 203.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000105 bytes_write=3077 bytes_read=6661 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008328 host: mcu_awake=0.005 mcu_task_avg=0.000032 mcu_task_stddev=0.000022 bytes_write=849 bytes_read=4604 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999380 adj=50000757  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.38 cputime=5.171 memavail=3327640 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 204.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000016 mcu_task_stddev=0.000105 bytes_write=3083 bytes_read=6782 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008723 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=855 bytes_read=4633 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999279 adj=50000365  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.38 cputime=5.186 memavail=3327640 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 205.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3089 bytes_read=6902 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008285 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=861 bytes_read=4649 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999228 adj=49999398  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.35 cputime=5.195 memavail=3327392 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 206.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3095 bytes_read=7038 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008116 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=867 bytes_read=4665 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999253 adj=49999114  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.35 cputime=5.204 memavail=3327392 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_down
Stats 207.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3116 bytes_read=7149 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007924 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=873 bytes_read=4681 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999298 adj=49999043  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.35 cputime=5.215 memavail=3327540 print_time=18.147 buffer_time=0.618 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 208.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3130 bytes_read=7255 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007889 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=879 bytes_read=4697 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999338 adj=49998988  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.35 cputime=5.224 memavail=3327648 print_time=18.147 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 209.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3136 bytes_read=7391 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007859 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=885 bytes_read=4726 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999465 adj=49999093  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.35 cputime=5.237 memavail=3327648 print_time=18.147 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Sending BLTOUCH_DEBUG COMMAND=pin_up
Stats 210.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3157 bytes_read=7516 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=0 freq=400007922 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=891 bytes_read=4742 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999489 adj=49999444  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.258 memavail=3327648 print_time=20.960 buffer_time=0.429 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 211.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3176 bytes_read=7624 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008033 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=897 bytes_read=4758 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999522 adj=49999174  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.276 memavail=3327648 print_time=20.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 212.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3182 bytes_read=7757 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008166 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=903 bytes_read=4774 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999558 adj=49999163  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.293 memavail=3327648 print_time=20.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 213.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3188 bytes_read=7863 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008278 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=909 bytes_read=4790 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999595 adj=49999089  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.310 memavail=3327656 print_time=20.960 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 214.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3194 bytes_read=7969 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=400008592 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=915 bytes_read=4819 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999622 adj=49999066  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.328 memavail=3327404 print_time=24.734 buffer_time=0.201 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
probe: open
Stats 215.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3207 bytes_read=8138 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008555 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=921 bytes_read=4835 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999651 adj=49998842  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.37 cputime=5.349 memavail=3327160 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 216.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3213 bytes_read=8244 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008574 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=927 bytes_read=4851 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999642 adj=49998963  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.37 cputime=5.366 memavail=3327160 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 217.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3219 bytes_read=8350 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008509 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=933 bytes_read=4867 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999637 adj=49998807  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.37 cputime=5.383 memavail=3327164 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 218.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3225 bytes_read=8486 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008476 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=939 bytes_read=4883 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999633 adj=49998763  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.37 cputime=5.402 memavail=3327164 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 219.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3231 bytes_read=8592 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008457 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=945 bytes_read=4912 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999625 adj=49998718  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.37 cputime=5.418 memavail=3327172 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 220.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3237 bytes_read=8712 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008501 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=951 bytes_read=4928 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999617 adj=49998647  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.34 cputime=5.435 memavail=3327172 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 221.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3243 bytes_read=8848 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008448 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=957 bytes_read=4944 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999614 adj=49998545  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.34 cputime=5.454 memavail=3327172 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 222.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3249 bytes_read=8950 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008461 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=963 bytes_read=4960 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999616 adj=49998572  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.34 cputime=5.471 memavail=3326948 print_time=24.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_z' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_z' reports GSTAT:      00000000
Stats 223.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=4843 bytes_read=10133 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=349 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008441 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=969 bytes_read=4976 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999597 adj=49998568  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.34 cputime=5.564 memavail=3326956 print_time=33.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 224.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=5436 bytes_read=10617 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008243 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=975 bytes_read=5005 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999576 adj=49998456  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.34 cputime=5.586 memavail=3326964 print_time=34.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 225.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=6036 bytes_read=11070 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008173 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=981 bytes_read=5021 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999566 adj=49998358  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.32 cputime=5.608 memavail=3327112 print_time=35.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 226.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=6636 bytes_read=11508 bytes_retransmit=9 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008157 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=987 bytes_read=5037 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999558 adj=49998392  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.630 memavail=3327216 print_time=36.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 227.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=7236 bytes_read=11976 bytes_retransmit=9 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008128 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=993 bytes_read=5053 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999552 adj=49998390  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.32 cputime=5.652 memavail=3327216 print_time=37.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 228.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=8128 bytes_read=12540 bytes_retransmit=9 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008131 host: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=999 bytes_read=5069 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999567 adj=49998410  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.32 cputime=5.699 memavail=3327216 print_time=38.875 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
TMC 'stepper_y' reports GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
TMC 'stepper_y' reports GSTAT:      00000000
Stats 229.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000006 bytes_write=9480 bytes_read=13564 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008149 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1005 bytes_read=5098 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999576 adj=49998558  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.32 cputime=5.775 memavail=3327216 print_time=39.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 230.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=9980 bytes_read=14108 bytes_retransmit=9 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008116 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1011 bytes_read=5114 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999583 adj=49998609  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.29 cputime=5.825 memavail=3327220 print_time=40.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 231.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=10477 bytes_read=14597 bytes_retransmit=9 bytes_invalid=0 send_seq=648 receive_seq=648 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008087 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1017 bytes_read=5130 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999590 adj=49998688  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=5.873 memavail=3327220 print_time=41.753 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 232.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=11809 bytes_read=15197 bytes_retransmit=9 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=400008189 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1023 bytes_read=5146 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999603 adj=49998744  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=5.962 memavail=3327488 print_time=43.101 buffer_time=0.555 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 233.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=11974 bytes_read=15460 bytes_retransmit=9 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=400008200 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=1029 bytes_read=5162 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999612 adj=49998689  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=5.990 memavail=3327488 print_time=43.101 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 234.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=12332 bytes_read=15870 bytes_retransmit=9 bytes_invalid=0 send_seq=733 receive_seq=733 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=400008220 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1035 bytes_read=5191 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999624 adj=49998741  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.028 memavail=3327488 print_time=45.035 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Transition to shutdown state: Shutdown due to webhooks request
Dumping gcode input 0 blocks
Dumping 20 requests for client 547748255632
Received 198.050907: b'{"id": 547610680960, "method": "objects/list", "params": {}}'
Received 198.052466: b'{"id": 547646386080, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 198.304436: b'{"id": 547610680960, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 198.306391: b'{"id": 547610680960, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 198.307973: b'{"id": 547610680960, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 198.309579: b'{"id": 547610680960, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 198.314648: b'{"id": 547610756912, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 198.314648: b'{"id": 547610757968, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 198.325581: b'{"id": 547610757008, "method": "info", "params": {}}'
Received 198.325581: b'{"id": 547610756576, "method": "objects/list", "params": {}}'
Received 198.326859: b'{"id": 547610756000, "method": "gcode/help", "params": {}}'
Received 198.342937: b'{"id": 547622451952, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "extruder": null, "heater_bed": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 198.551696: b'{"id": 547610757104, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "extruder": null, "heater_bed": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 198.551696: b'{"id": 547610758880, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": null, "manual_probe": null, "extruder": null, "heater_bed": null, "heater_fan my_nozzle_fan": null, "mcu": null, "mcu host": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _HOME_Y": null, "gcode_macro M808": null, "gcode_macro PROBE_XE": null, "gcode_macro PROBE_XD": null, "gcode_macro PROBE_YF": null, "gcode_macro PROBE_YT": null, "gcode_macro G29": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro Z_FORCE_MOVE": null, "gcode_macro TURN_Z_ON": null, "gcode_macro XY_FORCE_MOVE": null, "gcode_macro TURN_XY_ON": null, "stepper_enable": null, "tmc5160 stepper_x": null, "tmc5160 stepper_y": null, "tmc5160 stepper_z": null, "tmc5160 extruder": null, "heaters": null, "probe": null, "screws_tilt_adjust": null, "query_endstops": null, "system_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 207.377647: b'{"id": 547622453152, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_down"}}'
Received 210.189431: b'{"id": 547622451712, "method": "gcode/script", "params": {"script": "BLTOUCH_DEBUG COMMAND=pin_up"}}'
Received 214.645448: b'{"id": 547622451040, "method": "gcode/script", "params": {"script": "QUERY_PROBE"}}'
Received 221.473981: b'{"id": 547622450656, "method": "objects/query", "params": {"objects": {"webhooks": null, "print_stats": null, "virtual_sdcard": null, "display_status": null, "heaters": null, "toolhead": null, "extruder": null, "gcode_move": null, "fan": null, "heater_bed": null}}}'
Received 223.073319: b'{"id": 547622453152, "method": "gcode/script", "params": {"script": "G28"}}'
Received 235.699358: b'{"id": 547610756240, "method": "emergency_stop", "params": {}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[117.5, 92.5, 351.83950000000004, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (223.125009478, 0.0, 0.0)
MCU 'host' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=2302003371 clock_est=(214.009 1250448657 49999639.747) min_half_rtt=0.000051 min_rtt_time=224.212 time_avg=214.009(196.629) clock_avg=1250448657.597(9831403081.255) pred_variance=499281866.299 clock_adj=(-1.162 49998771.500)
Dumping serial stats: bytes_write=1047 bytes_read=5219 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 196.155235 196.155235 9: seq: 12, identify offset=1360 count=40
Sent 1 196.155893 196.155893 9: seq: 13, identify offset=1400 count=40
Sent 2 196.156579 196.156579 9: seq: 14, identify offset=1440 count=40
Sent 3 196.157235 196.157235 9: seq: 15, identify offset=1480 count=40
Sent 4 196.157874 196.157874 9: seq: 16, identify offset=1520 count=40
Sent 5 196.158517 196.158517 9: seq: 17, identify offset=1560 count=40
Sent 6 196.159161 196.159161 9: seq: 18, identify offset=1600 count=40
Sent 7 196.159799 196.159799 9: seq: 19, identify offset=1640 count=40
Sent 8 196.160442 196.160442 9: seq: 1a, identify offset=1680 count=40
Sent 9 196.161124 196.161124 9: seq: 1b, identify offset=1720 count=40
Sent 10 196.161772 196.161772 9: seq: 1c, identify offset=1760 count=40
Sent 11 196.162415 196.162415 9: seq: 1d, identify offset=1800 count=40
Sent 12 196.163057 196.163057 9: seq: 1e, identify offset=1840 count=40
Sent 13 196.163700 196.163700 9: seq: 1f, identify offset=1880 count=40
Sent 14 196.164366 196.164366 9: seq: 10, identify offset=1920 count=40
Sent 15 196.165078 196.165078 9: seq: 11, identify offset=1960 count=40
Sent 16 196.165752 196.165752 9: seq: 12, identify offset=2000 count=40
Sent 17 196.166397 196.166397 9: seq: 13, identify offset=2040 count=40
Sent 18 196.166995 196.166995 9: seq: 14, identify offset=2080 count=40
Sent 19 196.167567 196.167567 9: seq: 15, identify offset=2120 count=40
Sent 20 196.168132 196.168132 9: seq: 16, identify offset=2160 count=40
Sent 21 196.168798 196.168798 9: seq: 17, identify offset=2200 count=40
Sent 22 196.169378 196.169378 9: seq: 18, identify offset=2240 count=40
Sent 23 196.169948 196.169948 9: seq: 19, identify offset=2280 count=40
Sent 24 196.170516 196.170516 9: seq: 1a, identify offset=2320 count=40
Sent 25 196.171078 196.171078 9: seq: 1b, identify offset=2360 count=40
Sent 26 196.171644 196.171644 9: seq: 1c, identify offset=2400 count=40
Sent 27 196.172206 196.172206 9: seq: 1d, identify offset=2440 count=40
Sent 28 196.172815 196.172815 9: seq: 1e, identify offset=2480 count=40
Sent 29 196.173383 196.173383 9: seq: 1f, identify offset=2520 count=40
Sent 30 196.173946 196.173946 9: seq: 10, identify offset=2560 count=40
Sent 31 196.174506 196.174506 9: seq: 11, identify offset=2600 count=40
Sent 32 196.175067 196.175067 9: seq: 12, identify offset=2640 count=40
Sent 33 196.175645 196.175645 9: seq: 13, identify offset=2680 count=40
Sent 34 196.176210 196.176210 9: seq: 14, identify offset=2720 count=40
Sent 35 196.176816 196.176816 9: seq: 15, identify offset=2760 count=40
Sent 36 196.177384 196.177384 9: seq: 16, identify offset=2800 count=40
Sent 37 196.177973 196.177973 9: seq: 17, identify offset=2840 count=40
Sent 38 196.178538 196.178538 9: seq: 18, identify offset=2880 count=40
Sent 39 196.179099 196.179099 9: seq: 19, identify offset=2920 count=40
Sent 40 196.179659 196.179659 9: seq: 1a, identify offset=2960 count=40
Sent 41 196.180219 196.180219 9: seq: 1b, identify offset=3000 count=40
Sent 42 196.180821 196.180821 9: seq: 1c, identify offset=3040 count=40
Sent 43 196.181392 196.181392 9: seq: 1d, identify offset=3080 count=40
Sent 44 196.181953 196.181953 9: seq: 1e, identify offset=3120 count=40
Sent 45 196.182507 196.182507 9: seq: 1f, identify offset=3137 count=40
Sent 46 196.234448 196.234448 6: seq: 10, get_uptime
Sent 47 196.286482 196.286482 6: seq: 11, get_clock
Sent 48 196.337851 196.337851 6: seq: 12, get_clock
Sent 49 196.388476 196.388476 6: seq: 13, get_clock
Sent 50 196.439124 196.439124 6: seq: 14, get_clock
Sent 51 196.489823 196.489823 6: seq: 15, get_clock
Sent 52 196.541127 196.541127 6: seq: 16, get_clock
Sent 53 196.592524 196.592524 6: seq: 17, get_clock
Sent 54 196.643150 196.643150 6: seq: 18, get_clock
Sent 55 196.644453 196.644453 6: seq: 19, get_clock
Sent 56 196.656108 196.656108 6: seq: 1a, get_config
Sent 57 196.657065 196.657065 7: seq: 1b, allocate_oids count=0
Sent 58 196.657143 196.657143 11: seq: 1c, finalize_config crc=3912464276
Sent 59 196.657212 196.657212 6: seq: 1d, get_config
Sent 60 197.629086 197.629086 6: seq: 1e, get_clock
Sent 61 198.613656 198.613656 6: seq: 1f, get_clock
Sent 62 199.598326 199.598326 6: seq: 10, get_clock
Sent 63 200.582395 200.582395 6: seq: 11, get_clock
Sent 64 201.566693 201.566693 6: seq: 12, get_clock
Sent 65 202.551784 202.551784 6: seq: 13, get_clock
Sent 66 203.536578 203.536578 6: seq: 14, get_clock
Sent 67 204.521198 204.521198 6: seq: 15, get_clock
Sent 68 205.505937 205.505937 6: seq: 16, get_clock
Sent 69 206.490735 206.490735 6: seq: 17, get_clock
Sent 70 207.475014 207.475014 6: seq: 18, get_clock
Sent 71 208.460052 208.460052 6: seq: 19, get_clock
Sent 72 209.444448 209.444448 6: seq: 1a, get_clock
Sent 73 210.428929 210.428929 6: seq: 1b, get_clock
Sent 74 211.413199 211.413199 6: seq: 1c, get_clock
Sent 75 212.397742 212.397742 6: seq: 1d, get_clock
Sent 76 213.381939 213.381939 6: seq: 1e, get_clock
Sent 77 214.366248 214.366248 6: seq: 1f, get_clock
Sent 78 215.350836 215.350836 6: seq: 10, get_clock
Sent 79 216.335269 216.335269 6: seq: 11, get_clock
Sent 80 217.319545 217.319545 6: seq: 12, get_clock
Sent 81 218.304776 218.304776 6: seq: 13, get_clock
Sent 82 219.289138 219.289138 6: seq: 14, get_clock
Sent 83 220.273365 220.273365 6: seq: 15, get_clock
Sent 84 221.258354 221.258354 6: seq: 16, get_clock
Sent 85 222.242492 222.242492 6: seq: 17, get_clock
Sent 86 223.227043 223.227043 6: seq: 18, get_clock
Sent 87 224.211925 224.211925 6: seq: 19, get_clock
Sent 88 225.196035 225.196035 6: seq: 1a, get_clock
Sent 89 226.180037 226.180037 6: seq: 1b, get_clock
Sent 90 227.164139 227.164139 6: seq: 1c, get_clock
Sent 91 228.148126 228.148126 6: seq: 1d, get_clock
Sent 92 229.133571 229.133571 6: seq: 1e, get_clock
Sent 93 230.118285 230.118285 6: seq: 1f, get_clock
Sent 94 231.102396 231.102396 6: seq: 10, get_clock
Sent 95 232.087191 232.087191 6: seq: 11, get_clock
Sent 96 233.071516 233.071516 6: seq: 12, get_clock
Sent 97 234.055684 234.055684 6: seq: 13, get_clock
Sent 98 235.040585 235.040585 6: seq: 14, get_clock
Sent 99 235.705174 235.705174 6: seq: 15, emergency_stop
Dumping receive queue 100 messages
Receive: 0 196.159332 196.159161 49: seq: 19, identify_response offset=1600 data=b'\x14L<\xcc\x1c(\xf4@\xc0\xaa\x0f\x8a<\x10\xdc\x9b\x0f\x8a=\xd0&\x99\x81\x12\x07\xca@=|P\xea\x81\xc29\x1b\x99\x07\x8a\xe7l'
Receive: 1 196.159969 196.159799 49: seq: 1a, identify_response offset=1640 data=b'\xac=P\xa2\xd8\xf84\xf3\x8eP\xee(e\x08\xe38\x0ev\xa0\x90\x85LW\xc9\xbaR\xa9\xdcX\xf3t\x15Fw\xa0c\x9aJk\x14'
Receive: 2 196.160644 196.160442 49: seq: 1b, identify_response offset=1680 data=b'\x0c+~\xbf\xd2Z\xa5\xf6\xa3\xa9PM\x81F\xfa\x93\x91\x9aL\xc3\xc8\x9f\x8c\xd5\xe4\xda\x88\x86&\x135\x19\xae\xa2\xc4\x9fMi6\xda'
Receive: 3 196.161300 196.161124 49: seq: 1c, identify_response offset=1720 data=b'\xcc\xb6\xcah\xd6^\t\xcd\xaei\x16\xfc\x9c9+\xa4)\x02\xfd\xc4\x00\x85U.*m\x99LY\xf0\x9eR5j\xc1\\\xd55\xd3\x06'
Receive: 4 196.161942 196.161772 49: seq: 1d, identify_response offset=1760 data=b'h"\x93d\xcd$Gv,\xee9\x96\x89\x98\x92q?\xf2P{\xea\xaaF\x0f\xf6\xc4L\xb5RQX\xbd.Z\xd6v#\x03W\xc6'
Receive: 5 196.162585 196.162415 49: seq: 1e, identify_response offset=1800 data=b'0\x1c0\xb8\t"f\x8a\x98=\x1c\x05\x8c\xc9\xb3H\xd6\x83o\x04\x16)n\x03\xedW#\xc6I\xa8\xa7\x0f\xb0*\xec^\x8cLHV'
Receive: 6 196.163227 196.163057 49: seq: 1f, identify_response offset=1840 data=b'\xe8\xbd\xa8{@U\x94F\x96\x88\x8a^\x89j=\x9aUi\x82J\xb5`;\xde2S`[zH%\xae\xa9]\xc9\xfab\x90\x00R'
Receive: 7 196.163870 196.163700 49: seq: 10, identify_response offset=1880 data=b'\xbd,UF\x19\xc0\xc0!E\x91\xa3jZ^wS]\xd1\xb9\x94\xeb}u\x1bn\xbe\x87T\x14\xd9\x02\xe2\xf1\x88\x03\xeaI|\x11*'
Receive: 8 196.164583 196.164366 49: seq: 11, identify_response offset=1920 data=b'\xfb\x1a<f\x05\x19\x8f\x18\xbf\xa1,\xf2\x0b\xc9\x9ai\xe4\x8f\x96\x0e\xc4`\xf0\xe67\x8b\xedH\x03\x81\xf0#\xbb\x012\x94J\x8b\xa6\xa7'
Receive: 9 196.165265 196.165078 49: seq: 12, identify_response offset=1960 data=b'\xad\x19U\x8aXE\xbc\xc6\xc33\x08}#\xd6\xe1M\x07lt\xad\xd0\xc1G\xe3a\xa6Jx\x10\x18\xc9\x8d2:ujW\xc0o\\'
Receive: 10 196.165924 196.165752 49: seq: 13, identify_response offset=2000 data=b'a\xbe5%\x1d?tC\xc9m/\x86\xe9n1\xf5\xe2~|\xf7\xe6-C\xc3e\xa0\xcc\x02\xd0P\x0e{H\x01+*b\xdePJ'
Receive: 11 196.166572 196.166397 49: seq: 14, identify_response offset=2040 data=b'\xeb\xad\x8b}H&\xaa\x0bL\x14\xb5\xdc:\xd0%\xd5\x99\xd6\\P\x03\xef3\xa4J\xcb\x91\x12\xeeb,@ _}\xfb\x15u\xb0\x0c'
Receive: 12 196.167149 196.166995 49: seq: 15, identify_response offset=2080 data=b'\x91i\xd3\xba\xae1%\xa6T\xd6\x18,{\x94\xd4\x9f\x034\xd4-\xb0\x1d\xc8j\xa93c\x80M\x07\x96\xa5\xd5\x8ba\xfb\x10\xa3\xa8\x03'
Receive: 13 196.167716 196.167567 49: seq: 16, identify_response offset=2120 data=b'\xdbf\xa3m/R\x96u\x02\xd7\x15\xa5\xdd?\xf6\x18\x00\x8b`\xe4\xe7\xb0WbfM\xcbQ[:\x03i\xa9HN\xf9\xe3\x12\xcb\x80'
Receive: 14 196.168313 196.168132 49: seq: 17, identify_response offset=2160 data=b'\xbc\xbd\xb1\xa9g\x82}\xb4\x9e\xcd\xeb\xf2G]#\xed\x9cxB\x9a\x957\x1e\x0e6\tn\x8aG\xd4\xdd\x8d\x9175\xe8n\xa0</'
Receive: 15 196.168950 196.168798 49: seq: 18, identify_response offset=2200 data=b"\x0e\x9c\xf1\xb6\x84\xf4\xd0\x18(\xf0r#\xa4\xe4\xb0%\x94\x9a\xd5T\xa3\xbe\x011f\xe5L'*\xca\x18\xf8=\xc7\x8b\xc2\x84\xfcy\x82"
Receive: 16 196.169529 196.169378 49: seq: 19, identify_response offset=2240 data=b'c1T\xcaCil\xecO=\x8fm\xe4\xa2\x91\xf1\xb1\xe2\x06\xafR\x952\x0cF\xc3\xbe\xee\x1e\xa8x\xfa\x95\xeb\x05`)4\xa0A'
Receive: 17 196.170099 196.169948 49: seq: 1a, identify_response offset=2280 data=b'Y\x1cx\xd3\xbe@\x9f\x82\xcd\x8b[\x8bp\xc27{\x10\xe0\x97\xf9c\xc9\x01\xea\xb7])\x17u\x943\x96>C\x85\x15\x97GeN'
Receive: 18 196.170665 196.170516 49: seq: 1b, identify_response offset=2320 data=b'\xfc\x19\nL\x12o\xf9\xa8\xefD\xb1\x8d\x18\xa2\x99\x1a3gl\x01\xcfb\xed\x1a\x1bA\xb0\x98\xf2\xbb\xca\x9d\xf9\x0f)\xb7\xda\x11\x8f]'
Receive: 19 196.171228 196.171078 49: seq: 1c, identify_response offset=2360 data=b'\xc7\xf6\x85\x92\t\xc9\x03\xfb^\xef}\x15\xd1~O\xb5\xa0\xa9M\xfc^I\x11)\xc1-I\xae\xfax\xef\xe1\x0bt\xff\t{E\xdaw'
Receive: 20 196.171793 196.171644 49: seq: 1d, identify_response offset=2400 data=b'Hz\x14\xb2\x10\xd4X\x0b\xc1L\xffC[\xdca4\xea\xb4"+i\x10\x06\xb5\xba\x1c\x02h\x02\\,\xae\x00\t\xd3XSC\xc7\x81'
Receive: 21 196.172355 196.172206 49: seq: 1e, identify_response offset=2440 data=b"\x95\xc7Y\xfa.j\xa2.\x90\x8a\xaat\xe0\xd5)X\xc7\x02\x1b\x89\rn\xb29\xc1u'\xa52i\t\xf69\x02\xed\xe5\xd4\xdeZ`"
Receive: 22 196.172966 196.172815 49: seq: 1f, identify_response offset=2480 data=b"\xa1\xa2\x9d\xa0e'hNv\xf4\xca\xe4\xc0*\x1a\xcdX\x89|0\x86\xdf\xdbwoTaG\x9d\xadS\x98\xec9&\ri\xba\x04\xb6"
Receive: 23 196.173532 196.173383 49: seq: 10, identify_response offset=2520 data=b']\xfb\xf2\x0e#\x8f\xb2\xbd\x05\x173&\xb5\x034R\xd3\xfe*\x9d\xdd!5\xf5p\xe9^PkZ\xc3\x080;\x03\xdc\xaez\xb9\xcc'
Receive: 24 196.174094 196.173946 49: seq: 11, identify_response offset=2560 data=b'\xcb\xe3\xd4~\x04\xe5\x83T\xa5\xa2\x071o^:\x00pC^O\x07Yt\xeaPlIVJ\xa6*\x8ed5\x7f!\x81\xf3\xd4\x90'
Receive: 25 196.174655 196.174506 49: seq: 12, identify_response offset=2600 data=b'\xc7\xdc\xc3\x02\xc4\x84JO\xac\x89lO\x1a\xad;\xf6\x16\xf2!(s\xee\xb0J\xdbc\xa3]\xfe\x8d\x8aA\xf5\xb6jS#\xfd\xe2Z'
Receive: 26 196.175230 196.175067 49: seq: 13, identify_response offset=2640 data=b'Q\xf7\\b\xbb\x12=<\xf9\x9e\x12\xc0\x08\xc2\xb2\x1a\x922\xf5\x18\xf6\xf3\xd5\xf5O\xf4\xd0aZ\xfd\xaa:F\x03\xab\x8b\x01\xb3\x08\xec'
Receive: 27 196.175797 196.175645 49: seq: 14, identify_response offset=2680 data=b'\x06\x9c)\x01\xd1\xaa\xc9\xa9\xe3\xc3\x89N\xaa\xc8\tb\xe1\x0b\xe9\xe7\xc9\xe3\x02\xe6\x9fP\xcf\xc5\xe1&MU\xc2\xad?2\x95q\xd3G'
Receive: 28 196.176361 196.176210 49: seq: 15, identify_response offset=2720 data=b'\x96*\x17\x01\x1fY\xb6\x86q\xfc\xe9\x93j\xf8@\xba"9\xbd*\xeb6\xa7_\xc5K\x0c\xa3m\xc9\x17\xcd\xd4\x97\xe8P\xce\xb6E]'
Receive: 29 196.176969 196.176816 49: seq: 16, identify_response offset=2760 data=b'CJ\xf7\xddL\x9dL}\x1d\x7f\xb9\xbbi\xbf\xe7\xe0\xcc\x90j/\xf6\x1d\xfe\xd6\xc2{;\xc6\xc6\xcbKLFm\x7fu\xd6\xce\xa7%'
Receive: 30 196.177556 196.177384 49: seq: 17, identify_response offset=2800 data=b'\xcf5\xc0\xb046\xcf\xd63\x8a\xc2k\x9e2\x05\xd1\xe7\xc1\xc8D\xe9\x98\xeb\x08l\xec\xe3\x19x*\xfd\x12\xa0N\xa8\x1e\x0cp\xceh'
Receive: 31 196.178124 196.177973 49: seq: 18, identify_response offset=2840 data=b'\x96j\xc4@\x80\xf2\x19\xdfl\x91Z\xf5d?\xc7\xb5\xa6\xd0\x83\xdc\xed\xfe\x12\xe3\xbfy\xa5\x91\xe0\xa6\xed\xa3\xcb\x16\xeeT7k\r\xe8'
Receive: 32 196.178687 196.178538 49: seq: 19, identify_response offset=2880 data=b's\x02\x11\xe4\xe5iQl\x9c\x98\x07\x92\x19W\xc7\xae\x01\x7fp\xba\x88\xff\xfe\x02[\xc7\xee\xcd!7\xca\xe3\xba\x1b\xf4mD\xea\xf5\xf5'
Receive: 33 196.179248 196.179099 49: seq: 1a, identify_response offset=2920 data=b"=\\\xdb\xe0'm\xbaD\\|\xa0p\xd2d\xcb\xf2J\x0b\x14T\xce\xf4\x89\xbfDE1\x92\x9f\xed+\xff%\x15\x9d\xce\xa9\xe8\xca{"
Receive: 34 196.179808 196.179659 49: seq: 1b, identify_response offset=2960 data=b'\x87\x98\xdf\x88\x9c\xcaR\xbd\x83\x94\x88\x07\xc2\x07)\xf8Oq[t&.\xb8\x9bW\x83\xf3\x02H\xfd*\xfb\x8b\xac4\xf4)\xbc>\x99'
Receive: 35 196.180370 196.180219 49: seq: 1c, identify_response offset=3000 data=b'O\x80x\xd1\xb9\xee\xe6\xc9\x05\xfb\xfdr\xff\xa61\xf9\xf6\xdb\x89\x7f\xaa\x19\x91*\xa1\x87Q\x95\x11\x9b\x98\nj\xe9lAN\x8d\xfe\x91'
Receive: 36 196.180971 196.180821 49: seq: 1d, identify_response offset=3040 data=b"\xbf\x93)f\xaeC\xb8h\x1f\xd2S\x0f\xc4\x1e\xa8\xce\xe7\x9e\xf1\x0blc2\xb6\xa1\xae'sM\xc5\xd3\x13`;\x91N\xbb\xf5\x1b\x85"
Receive: 37 196.181541 196.181392 49: seq: 1e, identify_response offset=3080 data=b'\xce\x82\xca\xc2v-\xcf\xbeNz\x9ee\xab<\xbf*\xa0\xe9\xa9~\xf2\xdd\xce\x1a\x1c\xb3\xfeg\xa2`\x17\xdc\xaf.\xc3\xf0r\x05BN'
Receive: 38 196.182101 196.181953 26: seq: 1f, identify_response offset=3120 data=b"_\x1e\xee\xb6Q\xb2\xde\x84\xab\xe0\xd3\x7f\x01'\xd3\x1e\x16"
Receive: 39 196.182655 196.182507 9: seq: 10, identify_response offset=3137 data=b''
Receive: 40 196.234737 196.234448 12: seq: 11, uptime high=0 clock=361708762
Receive: 41 196.286616 196.286482 11: seq: 12, clock clock=364306179
Receive: 42 196.337992 196.337851 11: seq: 13, clock clock=366874797
Receive: 43 196.388586 196.388476 11: seq: 14, clock clock=369404207
Receive: 44 196.439281 196.439124 11: seq: 15, clock clock=371938545
Receive: 45 196.489943 196.489823 11: seq: 16, clock clock=374472006
Receive: 46 196.541295 196.541127 11: seq: 17, clock clock=377039265
Receive: 47 196.592673 196.592524 11: seq: 18, clock clock=379608205
Receive: 48 196.643255 196.643150 11: seq: 19, clock clock=382137550
Receive: 49 196.644631 196.644453 11: seq: 1a, clock clock=382206664
Receive: 50 196.656240 196.656108 10: seq: 1b, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 51 196.657310 196.657212 15: seq: 1e, config is_config=1 crc=3912464276 is_shutdown=0 move_count=1024
Receive: 52 197.629203 197.629086 11: seq: 1f, clock clock=431434902
Receive: 53 198.613780 198.613656 11: seq: 10, clock clock=480663194
Receive: 54 199.100608 198.613656 15: seq: 10, stats count=147 sum=232210 sumsq=2143051
Receive: 55 199.598461 199.598326 11: seq: 11, clock clock=529896699
Receive: 56 200.582533 200.582395 11: seq: 12, clock clock=579099934
Receive: 57 201.567006 201.566693 11: seq: 13, clock clock=628319848
Receive: 58 202.552020 202.551784 11: seq: 14, clock clock=677571156
Receive: 59 203.536819 203.536578 11: seq: 15, clock clock=726810620
Receive: 60 204.100878 203.536578 13: seq: 15, stats count=55 sum=21224 sumsq=175387
Receive: 61 204.521309 204.521198 11: seq: 16, clock clock=776037358
Receive: 62 205.506047 205.505937 11: seq: 17, clock clock=825273789
Receive: 63 206.490884 206.490735 11: seq: 18, clock clock=874514791
Receive: 64 207.475175 207.475014 11: seq: 19, clock clock=923729254
Receive: 65 208.460215 208.460052 11: seq: 1a, clock clock=972980927
Receive: 66 209.200823 208.460052 13: seq: 1a, stats count=56 sum=15663 sumsq=76200
Receive: 67 209.444809 209.444448 11: seq: 1b, clock clock=1022205448
Receive: 68 210.429171 210.428929 11: seq: 1c, clock clock=1071425245
Receive: 69 211.413465 211.413199 11: seq: 1d, clock clock=1120639288
Receive: 70 212.398026 212.397742 11: seq: 1e, clock clock=1169866833
Receive: 71 213.382246 213.381939 11: seq: 1f, clock clock=1219077214
Receive: 72 214.200835 213.381939 13: seq: 1f, stats count=55 sum=27767 sumsq=286373
Receive: 73 214.366544 214.366248 11: seq: 10, clock clock=1268292158
Receive: 74 215.351171 215.350836 11: seq: 11, clock clock=1317522035
Receive: 75 216.335526 216.335269 11: seq: 12, clock clock=1366740134
Receive: 76 217.319803 217.319545 11: seq: 13, clock clock=1415953659
Receive: 77 218.305041 218.304776 11: seq: 14, clock clock=1465214947
Receive: 78 219.200945 218.304776 13: seq: 14, stats count=55 sum=28290 sumsq=287126
Receive: 79 219.289462 219.289138 11: seq: 15, clock clock=1514432051
Receive: 80 220.273593 220.273365 11: seq: 16, clock clock=1563642840
Receive: 81 221.258593 221.258354 11: seq: 17, clock clock=1612892390
Receive: 82 222.242754 222.242492 11: seq: 18, clock clock=1662099518
Receive: 83 223.227169 223.227043 11: seq: 19, clock clock=1711323421
Receive: 84 224.212028 224.211925 11: seq: 1a, clock clock=1760566100
Receive: 85 224.212038 224.211925 13: seq: 1a, stats count=56 sum=25767 sumsq=272758
Receive: 86 225.196158 225.196035 11: seq: 1b, clock clock=1809772381
Receive: 87 226.180167 226.180037 11: seq: 1c, clock clock=1858972285
Receive: 88 227.164264 227.164139 11: seq: 1d, clock clock=1908177040
Receive: 89 228.148395 228.148126 11: seq: 1e, clock clock=1957380190
Receive: 90 229.133789 229.133571 11: seq: 1f, clock clock=2006651205
Receive: 91 229.300928 229.133571 13: seq: 1f, stats count=56 sum=18582 sumsq=127516
Receive: 92 230.118522 230.118285 11: seq: 10, clock clock=2055886442
Receive: 93 231.102642 231.102396 11: seq: 11, clock clock=2105091746
Receive: 94 232.087479 232.087191 11: seq: 12, clock clock=2154332862
Receive: 95 233.071765 233.071516 11: seq: 13, clock clock=2203548184
Receive: 96 234.055964 234.055684 11: seq: 14, clock clock=2252757510
Receive: 97 234.300974 234.055684 13: seq: 14, stats count=55 sum=27316 sumsq=244457
Receive: 98 235.040899 235.040585 11: seq: 15, clock clock=2302003371
Receive: 99 235.705669 235.705174 12: seq: 16, shutdown clock=2335238159 static_string_id=Command request
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=400000000 last_clock=18141531884 clock_est=(214.231 9627641606 400008240.982) min_half_rtt=0.000068 min_rtt_time=224.686 time_avg=214.231(205.780) clock_avg=9627641606.925(82313554830.205) pred_variance=30471849382.839
Dumping serial stats: bytes_write=12952 bytes_read=16310 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 232.150496 232.150496 13: seq: 18, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 1 232.151665 232.151665 13: seq: 19, queue_step oid=9 interval=25000 count=800 add=0
Sent 2 232.199992 232.199992 20: seq: 1a, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=4029568781
Sent 3 232.250585 232.250585 13: seq: 1b, queue_step oid=9 interval=25000 count=800 add=0
Sent 4 232.300218 232.300218 20: seq: 1c, queue_step oid=9 interval=25000 count=800 add=0, trsync_set_timeout oid=11 clock=4069568765
Sent 5 232.324706 232.324706 8: seq: 1d, trsync_trigger oid=11 reason=3
Sent 6 232.326218 232.326218 17: seq: 1e, endstop_home oid=10 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0, trsync_trigger oid=11 reason=3
Sent 7 232.327172 232.327172 7: seq: 1f, stepper_get_position oid=9
Sent 8 232.328125 232.328125 13: seq: 10, spi_send oid=1 data=b'j\x00\x00\x00\x00'
Sent 9 232.328213 232.328213 13: seq: 11, spi_transfer oid=1 data=b'j\x00\x00\x00\x00'
Sent 10 232.329368 232.329368 7: seq: 12, endstop_query_state oid=10
Sent 11 232.330347 232.330347 8: seq: 13, reset_step_clock oid=9 clock=0
Sent 12 232.331439 232.331439 21: seq: 14, spi_send oid=1 data=b'\x80\x00\x00\x00\x0c', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 13 232.332443 232.332443 21: seq: 15, spi_send oid=1 data=b'\x94\x00\x00\x00\x00', spi_transfer oid=1 data=b'\x00\x00\x00\x00\x00'
Sent 14 232.360109 232.360109 56: seq: 16, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=9 dir=1, set_next_step_dir oid=12 dir=1, queue_step oid=9 interval=4080569234 count=1 add=0, queue_step oid=9 interval=318030 count=1 add=0, queue_step oid=9 interval=210818 count=4 add=-27204, queue_step oid=9 interval=123907 count=8 add=-6165, queue_step oid=9 interval=79777 count=18 add=-1609
Sent 15 232.360109 232.360109 63: seq: 17, queue_step oid=6 interval=4083116346 count=1 add=0, queue_step oid=6 interval=232148 count=1 add=0, queue_step oid=12 interval=4083116346 count=1 add=0, queue_step oid=12 interval=232148 count=1 add=0, queue_step oid=6 interval=150217 count=5 add=-16395, queue_step oid=12 interval=150217 count=5 add=-16395, queue_step oid=9 interval=53203 count=34 add=-510
Sent 16 232.360109 232.360109 61: seq: 18, queue_step oid=6 interval=82148 count=12 add=-3066, queue_step oid=12 interval=82148 count=12 add=-3066, queue_step oid=6 interval=50813 count=23 add=-822, queue_step oid=12 interval=50813 count=23 add=-822, queue_step oid=9 interval=36887 count=37 add=-353, queue_step oid=6 interval=34040 count=60 add=-254, queue_step oid=12 interval=34040 count=60 add=-254
Sent 17 232.360109 232.360109 64: seq: 19, queue_step oid=9 interval=25094 count=69 add=-116, queue_step oid=6 interval=20032 count=68 add=-93, queue_step oid=12 interval=20032 count=68 add=-93, queue_step oid=9 interval=17960 count=97 add=-48, queue_step oid=6 interval=14408 count=98 add=-38, queue_step oid=12 interval=14408 count=98 add=-38, queue_step oid=9 interval=13798 count=154 add=-24
Sent 18 232.360109 232.360109 61: seq: 1a, queue_step oid=6 interval=11093 count=123 add=-19, queue_step oid=12 interval=11093 count=123 add=-19, queue_step oid=6 interval=8974 count=173 add=-10, queue_step oid=12 interval=8974 count=173 add=-10, queue_step oid=9 interval=10365 count=149 add=-10, queue_step oid=6 interval=7399 count=200 add=-6, queue_step oid=12 interval=7399 count=200 add=-6, queue_step oid=9 interval=9056 count=224 add=-6
Sent 19 232.360109 232.360109 61: seq: 1b, queue_step oid=6 interval=6311 count=151 add=-3, queue_step oid=12 interval=6311 count=151 add=-3, queue_step oid=9 interval=7835 count=257 add=-4, queue_step oid=6 interval=6003 count=197 add=-2, queue_step oid=12 interval=6003 count=197 add=-2, queue_step oid=6 interval=5731 count=169 add=-2, queue_step oid=12 interval=5731 count=169 add=-2, queue_step oid=9 interval=6900 count=625 add=-1
Sent 20 232.367823 232.367823 64: seq: 1c, queue_step oid=6 interval=5457 count=294 add=-1, queue_step oid=12 interval=5457 count=294 add=-1, queue_step oid=6 interval=5234 count=34428 add=0, queue_step oid=12 interval=5234 count=34428 add=0, queue_step oid=9 interval=6340 count=215 add=-1, queue_step oid=9 interval=6203 count=3531 add=0, queue_step oid=9 interval=6202 count=23000 add=0, queue_step oid=9 interval=6203 count=3585 add=0
Sent 21 232.369150 232.369150 61: seq: 1d, queue_step oid=6 interval=5234 count=10037 add=0, queue_step oid=12 interval=5234 count=10037 add=0, queue_step oid=9 interval=6202 count=6466 add=0, queue_step oid=9 interval=6324 count=244 add=1, queue_step oid=9 interval=6686 count=201 add=1, queue_step oid=6 interval=5297 count=195 add=1, queue_step oid=12 interval=5297 count=195 add=1, queue_step oid=9 interval=6961 count=287 add=2
Sent 22 232.369150 232.369150 61: seq: 1e, queue_step oid=6 interval=5548 count=195 add=2, queue_step oid=12 interval=5548 count=195 add=2, queue_step oid=6 interval=5845 count=181 add=3, queue_step oid=12 interval=5845 count=181 add=3, queue_step oid=9 interval=7682 count=226 add=6, queue_step oid=6 interval=6265 count=185 add=4, queue_step oid=12 interval=6265 count=185 add=4, queue_step oid=6 interval=7147 count=170 add=7
Sent 23 232.369150 232.369150 62: seq: 1f, queue_step oid=12 interval=7147 count=170 add=7, queue_step oid=9 interval=9201 count=166 add=10, queue_step oid=6 interval=8484 count=147 add=13, queue_step oid=12 interval=8484 count=147 add=13, queue_step oid=9 interval=11069 count=118 add=19, queue_step oid=6 interval=10626 count=109 add=27, queue_step oid=12 interval=10626 count=109 add=27, queue_step oid=9 interval=13684 count=136 add=49
Sent 24 232.369150 232.369150 59: seq: 10, queue_step oid=6 interval=13984 count=74 add=66, queue_step oid=12 interval=13984 count=74 add=66, queue_step oid=6 interval=19758 count=42 add=205, queue_step oid=12 interval=19758 count=42 add=205, queue_step oid=9 interval=20911 count=62 add=125, queue_step oid=6 interval=30636 count=39 add=532, queue_step oid=12 interval=30636 count=39 add=532
Sent 25 232.369150 232.369150 62: seq: 11, queue_step oid=9 interval=29915 count=32 add=367, queue_step oid=6 interval=54525 count=13 add=1795, queue_step oid=12 interval=54525 count=13 add=1795, queue_step oid=9 interval=43223 count=36 add=1209, queue_step oid=6 interval=78847 count=7 add=7977, queue_step oid=12 interval=78847 count=7 add=7977, queue_step oid=6 interval=156980 count=2 add=29623
Sent 26 232.369150 232.369150 59: seq: 12, queue_step oid=12 interval=156980 count=2 add=29623, queue_step oid=6 interval=272414 count=1 add=0, queue_step oid=12 interval=272414 count=1 add=0, queue_step oid=9 interval=92031 count=10 add=3531, queue_step oid=9 interval=137433 count=5 add=13011, queue_step oid=9 interval=231084 count=1 add=0, queue_step oid=9 interval=277470 count=1 add=0
Sent 27 232.561823 232.561823 64: seq: 13, get_clock, queue_step oid=9 interval=403006 count=1 add=0, queue_digital_out oid=18 clock=60646189 on_ticks=590000, trsync_start oid=5 report_clock=372646189 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=472646189, endstop_home oid=4 clock=372646189 sample_ticks=6000 sample_count=4 rest_ticks=400000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 28 232.672970 232.672970 13: seq: 14, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 29 232.673060 232.673060 13: seq: 15, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 30 232.674019 232.674019 13: seq: 16, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 31 232.674097 232.674097 13: seq: 17, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 32 233.147657 233.147657 13: seq: 18, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 33 233.147793 233.147793 13: seq: 19, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 34 233.147991 233.147991 13: seq: 1a, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 35 233.148455 233.148455 13: seq: 1b, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 36 233.150475 233.150475 21: seq: 1c, spi_send oid=0 data=b'\x01\x00\x00\x00\x00', spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 37 233.151330 233.151330 13: seq: 1d, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 38 233.151429 233.151429 13: seq: 1e, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 39 233.546232 233.546232 14: seq: 1f, get_clock, queue_digital_out oid=18 clock=292646188 on_ticks=0
Sent 40 233.674024 233.674024 13: seq: 10, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 41 233.674139 233.674139 13: seq: 11, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 42 233.675052 233.675052 13: seq: 12, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 43 233.675138 233.675138 13: seq: 13, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 44 233.846097 233.846097 15: seq: 14, queue_digital_out oid=18 clock=332646189 on_ticks=466000
Sent 45 233.946111 233.946111 13: seq: 15, queue_digital_out oid=18 clock=372646189 on_ticks=0
Sent 46 234.043073 234.043073 8: seq: 16, trsync_trigger oid=5 reason=3
Sent 47 234.044020 234.044020 14: seq: 17, endstop_home oid=4 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0 trsync_oid=0 trigger_reason=0
Sent 48 234.044261 234.044261 8: seq: 18, trsync_trigger oid=5 reason=3
Sent 49 234.045065 234.045065 7: seq: 19, stepper_get_position oid=12
Sent 50 234.045900 234.045900 13: seq: 1a, spi_send oid=2 data=b'j\x00\x00\x00\x00'
Sent 51 234.045976 234.045976 13: seq: 1b, spi_transfer oid=2 data=b'j\x00\x00\x00\x00'
Sent 52 234.046861 234.046861 7: seq: 1c, stepper_get_position oid=6
Sent 53 234.047723 234.047723 13: seq: 1d, spi_send oid=0 data=b'j\x00\x00\x00\x00'
Sent 54 234.047797 234.047797 13: seq: 1e, spi_transfer oid=0 data=b'j\x00\x00\x00\x00'
Sent 55 234.048766 234.048766 7: seq: 1f, endstop_query_state oid=4
Sent 56 234.049657 234.049657 11: seq: 10, reset_step_clock oid=6 clock=0, reset_step_clock oid=12 clock=0
Sent 57 234.052664 234.052664 56: seq: 11, queue_digital_out oid=18 clock=475503246 on_ticks=260000, trsync_start oid=5 report_clock=827552558 report_ticks=40000000 expire_reason=2, stepper_stop_on_trigger oid=12 trsync_oid=5, stepper_stop_on_trigger oid=6 trsync_oid=5, trsync_set_timeout oid=5 clock=927552558, endstop_home oid=4 clock=827552558 sample_ticks=6000 sample_count=4 rest_ticks=40000 pin_value=1 trsync_oid=5 trigger_reason=1
Sent 58 234.148631 234.148631 13: seq: 12, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 59 234.148782 234.148782 13: seq: 13, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 60 234.149228 234.149228 13: seq: 14, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 61 234.150277 234.150277 29: seq: 15, spi_transfer oid=2 data=b'o\x00\x00\x00\x00', spi_send oid=0 data=b'\x01\x00\x00\x00\x00', spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 62 234.151586 234.151586 13: seq: 16, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 63 234.152012 234.152012 13: seq: 17, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 64 234.530564 234.530564 14: seq: 18, get_clock, queue_digital_out oid=18 clock=707503245 on_ticks=0
Sent 65 234.675073 234.675073 13: seq: 19, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 66 234.675642 234.675642 13: seq: 1a, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 67 234.676843 234.676843 13: seq: 1b, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 68 234.677261 234.677261 13: seq: 1c, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 69 234.883024 234.883024 15: seq: 1d, queue_digital_out oid=18 clock=747503246 on_ticks=466000
Sent 70 234.983014 234.983014 13: seq: 1e, queue_digital_out oid=18 clock=787503246 on_ticks=0
Sent 71 235.032704 235.032704 29: seq: 1f, set_next_step_dir oid=6 dir=1, set_next_step_dir oid=12 dir=0, queue_step oid=6 interval=834352558 count=1 add=0, queue_step oid=12 interval=834352558 count=1 add=0
Sent 72 235.082303 235.082303 63: seq: 10, queue_step oid=6 interval=292820 count=1 add=0, queue_step oid=12 interval=292820 count=1 add=0, queue_step oid=6 interval=191755 count=4 add=-22695, queue_step oid=12 interval=191755 count=4 add=-22695, queue_step oid=6 interval=109997 count=10 add=-4471, queue_step oid=12 interval=109997 count=10 add=-4471, queue_step oid=6 interval=68108 count=22 add=-1144
Sent 73 235.082303 235.082303 45: seq: 11, queue_step oid=12 interval=68108 count=22 add=-1144, queue_step oid=6 interval=44843 count=25 add=-286, queue_step oid=12 interval=44843 count=25 add=-286, queue_step oid=6 interval=40011 count=736 add=0, queue_step oid=12 interval=40011 count=737 add=0
Sent 74 235.132474 235.132474 21: seq: 12, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 75 235.151550 235.151550 13: seq: 13, spi_send oid=0 data=b'o\x00\x00\x00\x00'
Sent 76 235.152142 235.152142 13: seq: 14, spi_transfer oid=0 data=b'o\x00\x00\x00\x00'
Sent 77 235.153573 235.153573 13: seq: 15, spi_send oid=2 data=b'o\x00\x00\x00\x00'
Sent 78 235.153884 235.153884 13: seq: 16, spi_transfer oid=2 data=b'o\x00\x00\x00\x00'
Sent 79 235.154164 235.154164 13: seq: 17, spi_send oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 80 235.154720 235.154720 13: seq: 18, spi_transfer oid=0 data=b'\x01\x00\x00\x00\x00'
Sent 81 235.155798 235.155798 13: seq: 19, spi_send oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 82 235.156112 235.156112 13: seq: 1a, spi_transfer oid=2 data=b'\x01\x00\x00\x00\x00'
Sent 83 235.181897 235.181897 21: seq: 1b, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 84 235.232599 235.232599 21: seq: 1c, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 85 235.282205 235.282205 28: seq: 1d, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=967552956
Sent 86 235.331865 235.331865 21: seq: 1e, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 87 235.382546 235.382546 28: seq: 1f, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=1007552962
Sent 88 235.432197 235.432197 21: seq: 10, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 89 235.482384 235.482384 28: seq: 11, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=1047552966
Sent 90 235.515222 235.515222 6: seq: 12, get_clock
Sent 91 235.532615 235.532615 21: seq: 13, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 92 235.582479 235.582479 28: seq: 14, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=1087552950
Sent 93 235.632284 235.632284 21: seq: 15, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0
Sent 94 235.675291 235.675291 13: seq: 16, spi_send oid=1 data=b'o\x00\x00\x00\x00'
Sent 95 235.675735 235.675735 13: seq: 17, spi_transfer oid=1 data=b'o\x00\x00\x00\x00'
Sent 96 235.676879 235.676879 13: seq: 18, spi_send oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 97 235.677244 235.677244 13: seq: 19, spi_transfer oid=1 data=b'\x01\x00\x00\x00\x00'
Sent 98 235.681695 235.681695 28: seq: 1a, queue_step oid=6 interval=40000 count=500 add=0, queue_step oid=12 interval=40000 count=500 add=0, trsync_set_timeout oid=5 clock=1127552962
Sent 99 235.705138 235.705138 6: seq: 1b, emergency_stop
Dumping receive queue 100 messages
Receive: 0 231.149903 231.149528 13: seq: 16, spi_transfer_response oid=0 response=b'|\x00\x00\x00\x00'
Receive: 1 231.149925 231.149528 13: seq: 16, spi_transfer_response oid=2 response=b'|\x00\x00\x00\x00'
Receive: 2 231.197933 231.150631 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3529568782
Receive: 3 231.208885 231.199944 15: seq: 18, analog_in_state oid=14 next_clock=3651098112 value=31278
Receive: 4 231.288893 231.250541 15: seq: 19, analog_in_state oid=22 next_clock=3683098112 value=31282
Receive: 5 231.297904 231.250541 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3569568781
Receive: 6 231.398007 231.350043 14: seq: 1b, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3609568765
Receive: 7 231.497947 231.450786 14: seq: 1e, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3649568784
Receive: 8 231.508863 231.500485 15: seq: 1f, analog_in_state oid=14 next_clock=3771098112 value=31281
Receive: 9 231.577767 231.577571 11: seq: 11, clock clock=3681521149
Receive: 10 231.588854 231.577571 15: seq: 11, analog_in_state oid=22 next_clock=3803098112 value=31282
Receive: 11 231.597871 231.577571 14: seq: 11, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3689568775
Receive: 12 231.673157 231.672929 13: seq: 15, spi_transfer_response oid=1 response=b'0\x00\x1f\x008'
Receive: 13 231.674136 231.673943 13: seq: 17, spi_transfer_response oid=1 response=b'0\x00\x00\x00\x00'
Receive: 14 231.697887 231.673943 14: seq: 17, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3729568772
Receive: 15 231.797885 231.750091 14: seq: 19, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3769568780
Receive: 16 231.808855 231.800764 15: seq: 1a, analog_in_state oid=14 next_clock=3891098112 value=31281
Receive: 17 231.888854 231.850664 15: seq: 1b, analog_in_state oid=22 next_clock=3923098112 value=31281
Receive: 18 231.897953 231.850664 14: seq: 1b, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3809568770
Receive: 19 231.997861 231.950331 14: seq: 1e, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3849568774
Receive: 20 232.097882 232.050868 14: seq: 10, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3889568777
Receive: 21 232.108852 232.099964 15: seq: 11, analog_in_state oid=14 next_clock=4011098112 value=31284
Receive: 22 232.147458 232.147230 13: seq: 13, spi_transfer_response oid=0 response=b'|\x81\x1f\x00%'
Receive: 23 232.148534 232.148292 13: seq: 15, spi_transfer_response oid=2 response=b'|\x81\x1f\x00,'
Receive: 24 232.149876 232.149566 13: seq: 17, spi_transfer_response oid=0 response=b'|\x00\x00\x00\x00'
Receive: 25 232.150783 232.150496 13: seq: 19, spi_transfer_response oid=2 response=b'|\x00\x00\x00\x00'
Receive: 26 232.188881 232.151665 15: seq: 1a, analog_in_state oid=22 next_clock=4043098112 value=31283
Receive: 27 232.197867 232.151665 14: seq: 1a, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3929568781
Receive: 28 232.297870 232.250585 14: seq: 1c, trsync_state oid=11 can_trigger=1 trigger_reason=0 clock=3969568765
Receive: 29 232.324660 232.300218 14: seq: 1d, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=3980286892
Receive: 30 232.324957 232.324706 10: seq: 1e, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 31 232.326490 232.326218 10: seq: 1f, trsync_state oid=11 can_trigger=0 trigger_reason=1 clock=0
Receive: 32 232.327393 232.327172 10: seq: 10, stepper_position oid=9 pos=-40128
Receive: 33 232.328389 232.328213 13: seq: 12, spi_transfer_response oid=1 response=b'4\x00\x00\x03\n'
Receive: 34 232.329620 232.329368 14: seq: 13, endstop_state oid=10 homing=0 next_clock=3980293381 pin_value=0
Receive: 35 232.331681 232.331439 13: seq: 15, spi_transfer_response oid=1 response=b'4\x00\x00\x00\x0c'
Receive: 36 232.332687 232.332443 13: seq: 16, spi_transfer_response oid=1 response=b'4\x00\x00\x00\x00'
Receive: 37 232.408871 232.369150 15: seq: 13, analog_in_state oid=14 next_clock=4131098112 value=31281
Receive: 38 232.488915 232.369150 15: seq: 13, analog_in_state oid=22 next_clock=4163098112 value=31284
Receive: 39 232.562147 232.561823 11: seq: 14, clock clock=4075262961
Receive: 40 232.673276 232.673060 13: seq: 16, spi_transfer_response oid=1 response=b'\xb0\x00\x1f\x01\r'
Receive: 41 232.674305 232.674097 13: seq: 18, spi_transfer_response oid=1 response=b'\xb0\x00\x00\x00\x00'
Receive: 42 232.708953 232.674097 14: seq: 18, analog_in_state oid=14 next_clock=4251098112 value=31276
Receive: 43 232.788933 232.674097 14: seq: 18, analog_in_state oid=22 next_clock=4283098112 value=31281
Receive: 44 233.008911 232.674097 14: seq: 18, analog_in_state oid=14 next_clock=76130816 value=31274
Receive: 45 233.088849 232.674097 14: seq: 18, analog_in_state oid=22 next_clock=108130816 value=31280
Receive: 46 233.148020 233.147793 13: seq: 1a, spi_transfer_response oid=0 response=b'\xf0\x00\x1f\x00\x86'
Receive: 47 233.149262 233.148455 13: seq: 1c, spi_transfer_response oid=2 response=b'\xf0\x00\x1f\x00\x98'
Receive: 48 233.150811 233.150475 13: seq: 1d, spi_transfer_response oid=0 response=b'\xf0\x00\x00\x00\x00'
Receive: 49 233.151596 233.151429 13: seq: 1f, spi_transfer_response oid=2 response=b'\xb0\x00\x00\x00\x00'
Receive: 50 233.308881 233.151429 14: seq: 1f, analog_in_state oid=14 next_clock=196130816 value=31280
Receive: 51 233.388857 233.151429 15: seq: 1f, analog_in_state oid=22 next_clock=228130816 value=31285
Receive: 52 233.546461 233.546232 10: seq: 10, clock clock=174046829
Receive: 53 233.608827 233.546232 15: seq: 10, analog_in_state oid=14 next_clock=316130816 value=31283
Receive: 54 233.674353 233.674139 13: seq: 12, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00^'
Receive: 55 233.675332 233.675138 13: seq: 14, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 56 233.688842 233.675138 15: seq: 14, analog_in_state oid=22 next_clock=348130816 value=31283
Receive: 57 233.908963 233.846097 15: seq: 15, analog_in_state oid=14 next_clock=436130816 value=31280
Receive: 58 233.988807 233.946111 15: seq: 16, analog_in_state oid=22 next_clock=468130816 value=31286
Receive: 59 234.043010 233.946111 14: seq: 16, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=372646488
Receive: 60 234.043032 233.946111 14: seq: 16, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=372664724
Receive: 61 234.043289 234.043073 10: seq: 17, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 62 234.044450 234.044261 10: seq: 19, trsync_state oid=5 can_trigger=0 trigger_reason=1 clock=0
Receive: 63 234.045264 234.045065 9: seq: 1a, stepper_position oid=12 pos=3971
Receive: 64 234.046148 234.045976 13: seq: 1c, spi_transfer_response oid=2 response=b'|\x00\x00\x03\xec'
Receive: 65 234.047133 234.046861 9: seq: 1d, stepper_position oid=6 pos=-4029
Receive: 66 234.047961 234.047797 13: seq: 1f, spi_transfer_response oid=0 response=b'|\x00\x00\x01\xec'
Receive: 67 234.049009 234.048766 14: seq: 10, endstop_state oid=4 homing=0 next_clock=373046189 pin_value=1
Receive: 68 234.148956 234.148782 13: seq: 14, spi_transfer_response oid=0 response=b'|\x81\x1f\x00m'
Receive: 69 234.150550 234.150277 13: seq: 16, spi_transfer_response oid=2 response=b'|\x81\x1f\x00u'
Receive: 70 234.150567 234.150277 13: seq: 16, spi_transfer_response oid=0 response=b'|\x00\x00\x00\x00'
Receive: 71 234.152268 234.152012 13: seq: 18, spi_transfer_response oid=2 response=b'|\x00\x00\x00\x00'
Receive: 72 234.208880 234.152012 15: seq: 18, analog_in_state oid=14 next_clock=556130816 value=31282
Receive: 73 234.288855 234.152012 15: seq: 18, analog_in_state oid=22 next_clock=588130816 value=31282
Receive: 74 234.508893 234.152012 15: seq: 18, analog_in_state oid=14 next_clock=676130816 value=31284
Receive: 75 234.530805 234.530564 11: seq: 19, clock clock=567790493
Receive: 76 234.588840 234.530564 15: seq: 19, analog_in_state oid=22 next_clock=708130816 value=31280
Receive: 77 234.675828 234.675642 13: seq: 1b, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00\\'
Receive: 78 234.677446 234.677261 13: seq: 1d, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 79 234.808849 234.677261 15: seq: 1d, analog_in_state oid=14 next_clock=796130816 value=31282
Receive: 80 234.888810 234.883024 15: seq: 1e, analog_in_state oid=22 next_clock=828130816 value=31286
Receive: 81 235.108862 235.082303 15: seq: 12, analog_in_state oid=14 next_clock=916130816 value=31278
Receive: 82 235.152443 235.152142 13: seq: 15, spi_transfer_response oid=0 response=b'\xfc\x81\x1f\x00a'
Receive: 83 235.154186 235.153884 13: seq: 17, spi_transfer_response oid=2 response=b'|\x81\x1f\x00a'
Receive: 84 235.155073 235.154720 13: seq: 19, spi_transfer_response oid=0 response=b'\xfc\x00\x00\x00\x00'
Receive: 85 235.156397 235.156112 13: seq: 1b, spi_transfer_response oid=2 response=b'|\x00\x00\x00\x00'
Receive: 86 235.180350 235.156112 14: seq: 1b, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=827552856
Receive: 87 235.188827 235.181897 15: seq: 1c, analog_in_state oid=22 next_clock=948130816 value=31284
Receive: 88 235.280179 235.232599 14: seq: 1d, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=867552956
Receive: 89 235.380199 235.331865 14: seq: 1f, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=907552962
Receive: 90 235.408955 235.382546 15: seq: 10, analog_in_state oid=14 next_clock=1036130816 value=31278
Receive: 91 235.409418 235.382546 15: seq: 10, stats count=484 sum=752049 sumsq=15269555
Receive: 92 235.480291 235.432197 14: seq: 11, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=947552966
Receive: 93 235.488906 235.482384 15: seq: 12, analog_in_state oid=22 next_clock=1068130816 value=31287
Receive: 94 235.515562 235.515222 11: seq: 13, clock clock=961662700
Receive: 95 235.580211 235.532615 14: seq: 14, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=987552950
Receive: 96 235.675937 235.675735 13: seq: 18, spi_transfer_response oid=1 response=b'\xf8\x80\x1f\x00]'
Receive: 97 235.677451 235.677244 13: seq: 1a, spi_transfer_response oid=1 response=b'\xf8\x00\x00\x00\x00'
Receive: 98 235.680175 235.677244 14: seq: 1a, trsync_state oid=5 can_trigger=1 trigger_reason=0 clock=1027552962
Receive: 99 235.705424 235.705138 12: seq: 1c, shutdown clock=1037633808 static_string_id=Command request
Stats 235.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=12952 bytes_read=16310 bytes_retransmit=9 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008240 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1047 bytes_read=5219 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999639 adj=49998771  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.27 cputime=6.103 memavail=3326880 print_time=45.735 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Dumping stepper 'stepper_x' (mcu) 5 queue_step:
queue_step 0: t=18167801670 p=230 i=40000 c=-500 a=0
queue_step 1: t=18187801670 p=-270 i=40000 c=-500 a=0
queue_step 2: t=18207801670 p=-770 i=40000 c=-500 a=0
queue_step 3: t=18227801670 p=-1270 i=40000 c=-500 a=0
queue_step 4: t=18247801670 p=-1770 i=40000 c=-500 a=0
Dumping stepper 'stepper_z' (mcu) 5 queue_step:
queue_step 0: t=18167841681 p=-171 i=40000 c=500 a=0
queue_step 1: t=18187841681 p=329 i=40000 c=500 a=0
queue_step 2: t=18207841681 p=829 i=40000 c=500 a=0
queue_step 3: t=18227841681 p=1329 i=40000 c=500 a=0
queue_step 4: t=18247841681 p=1829 i=40000 c=500 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=45.044554 mt=14.010740 sv=25.000000 a=0.000000 sp=(117.500000,92.500000,351.714500) ar=(0.000000,0.000000,-1.000000)
Requested toolhead position at shutdown time 45.543757: (117.5, 92.5, 339.2344218750002)
Homing failed due to printer shutdown
Stats 236.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=13330 bytes_read=16782 bytes_retransmit=9 bytes_invalid=0 send_seq=792 receive_seq=792 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008219 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1053 bytes_read=5235 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999635 adj=49998849  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.27 cputime=6.153 memavail=3326464 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 237.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=13375 bytes_read=16924 bytes_retransmit=9 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008200 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1059 bytes_read=5251 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999629 adj=49998784  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.27 cputime=6.164 memavail=3326464 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 238.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=13381 bytes_read=17045 bytes_retransmit=9 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008181 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1065 bytes_read=5267 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999626 adj=49998706  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.27 cputime=6.173 memavail=3326220 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 239.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000004 mcu_task_stddev=0.000006 bytes_write=13387 bytes_read=17166 bytes_retransmit=9 bytes_invalid=0 send_seq=798 receive_seq=798 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008196 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1071 bytes_read=5296 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999622 adj=49998675  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.27 cputime=6.183 memavail=3326220 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 240.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=13393 bytes_read=17286 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008183 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1077 bytes_read=5312 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999619 adj=49998602  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.25 cputime=6.192 memavail=3326220 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 241.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=13399 bytes_read=17407 bytes_retransmit=9 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008211 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1083 bytes_read=5328 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999622 adj=49998593  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.25 cputime=6.207 memavail=3326220 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 242.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=13405 bytes_read=17528 bytes_retransmit=9 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008212 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1089 bytes_read=5344 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999635 adj=49998585  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.25 cputime=6.226 memavail=3325972 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 243.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=13411 bytes_read=17632 bytes_retransmit=9 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008222 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1095 bytes_read=5360 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999642 adj=49998715  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.25 cputime=6.243 memavail=3325984 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 244.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000002 bytes_write=13417 bytes_read=17751 bytes_retransmit=9 bytes_invalid=0 send_seq=803 receive_seq=803 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008240 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=1101 bytes_read=5389 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999646 adj=49998749  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.25 cputime=6.263 memavail=3325984 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 245.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13423 bytes_read=17886 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008237 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=1107 bytes_read=5405 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999653 adj=49998734  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.23 cputime=6.281 memavail=3325984 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 246.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13429 bytes_read=17992 bytes_retransmit=9 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008245 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=1113 bytes_read=5421 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999657 adj=49998770  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.23 cputime=6.300 memavail=3325992 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 247.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13435 bytes_read=18113 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008260 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=1119 bytes_read=5437 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999665 adj=49998766  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.23 cputime=6.318 memavail=3325992 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 248.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13441 bytes_read=18234 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008261 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=1125 bytes_read=5453 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999670 adj=49998801  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.23 cputime=6.337 memavail=3325992 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 249.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13447 bytes_read=18340 bytes_retransmit=9 bytes_invalid=0 send_seq=808 receive_seq=808 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008268 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1131 bytes_read=5482 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999679 adj=49998811  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.23 cputime=6.354 memavail=3325992 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 250.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13453 bytes_read=18475 bytes_retransmit=9 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008292 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1137 bytes_read=5498 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999682 adj=49998853  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.374 memavail=3325996 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 251.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13459 bytes_read=18596 bytes_retransmit=9 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008300 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1143 bytes_read=5514 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999687 adj=49998804  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.392 memavail=3325996 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 252.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13465 bytes_read=18702 bytes_retransmit=9 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008292 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1149 bytes_read=5530 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999691 adj=49998805  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.410 memavail=3325996 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 253.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13471 bytes_read=18823 bytes_retransmit=9 bytes_invalid=0 send_seq=812 receive_seq=812 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008303 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1155 bytes_read=5546 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999698 adj=49998823  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.428 memavail=3325996 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 254.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13477 bytes_read=18940 bytes_retransmit=9 bytes_invalid=0 send_seq=813 receive_seq=813 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008309 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1161 bytes_read=5575 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999701 adj=49998838  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.29 cputime=6.446 memavail=3325996 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 255.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13483 bytes_read=19060 bytes_retransmit=9 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008313 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1173 bytes_read=5607 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999707 adj=49998822  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.26 cputime=6.465 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 256.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13489 bytes_read=19181 bytes_retransmit=9 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008311 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1179 bytes_read=5623 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999706 adj=49998836  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.26 cputime=6.484 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 257.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13495 bytes_read=19302 bytes_retransmit=9 bytes_invalid=0 send_seq=816 receive_seq=816 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008303 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1185 bytes_read=5639 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999710 adj=49998789  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.26 cputime=6.501 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 258.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13501 bytes_read=19408 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008306 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1191 bytes_read=5655 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999712 adj=49998812  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.26 cputime=6.519 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 259.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13507 bytes_read=19529 bytes_retransmit=9 bytes_invalid=0 send_seq=818 receive_seq=818 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008295 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1197 bytes_read=5684 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999711 adj=49998801  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.26 cputime=6.537 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 260.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13513 bytes_read=19664 bytes_retransmit=9 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008289 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1203 bytes_read=5700 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999712 adj=49998773  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.24 cputime=6.556 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 261.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13519 bytes_read=19770 bytes_retransmit=9 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008293 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1209 bytes_read=5716 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999710 adj=49998768  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.24 cputime=6.573 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 262.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13525 bytes_read=19891 bytes_retransmit=9 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008296 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1215 bytes_read=5732 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999710 adj=49998715  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.24 cputime=6.589 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 263.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13531 bytes_read=20012 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008291 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1221 bytes_read=5748 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999713 adj=49998698  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.24 cputime=6.607 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 264.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13537 bytes_read=20118 bytes_retransmit=9 bytes_invalid=0 send_seq=823 receive_seq=823 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008293 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1227 bytes_read=5777 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999715 adj=49998739  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.24 cputime=6.625 memavail=3325760 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 265.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13543 bytes_read=20248 bytes_retransmit=9 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008297 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1233 bytes_read=5793 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999718 adj=49998747  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.22 cputime=6.643 memavail=3325004 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 266.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13549 bytes_read=20369 bytes_retransmit=9 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008289 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1239 bytes_read=5809 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999721 adj=49998757  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.22 cputime=6.662 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 267.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13555 bytes_read=20475 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008335 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1245 bytes_read=5825 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999723 adj=49998788  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.22 cputime=6.680 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 268.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13561 bytes_read=20596 bytes_retransmit=9 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008339 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1251 bytes_read=5841 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999724 adj=49998713  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.22 cputime=6.699 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 269.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13567 bytes_read=20717 bytes_retransmit=9 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008336 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1257 bytes_read=5870 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999733 adj=49998712  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.22 cputime=6.718 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 270.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13573 bytes_read=20837 bytes_retransmit=9 bytes_invalid=0 send_seq=829 receive_seq=829 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008337 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1263 bytes_read=5886 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999730 adj=49998826  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.21 cputime=6.737 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 271.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13579 bytes_read=20958 bytes_retransmit=9 bytes_invalid=0 send_seq=830 receive_seq=830 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008368 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1269 bytes_read=5902 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999727 adj=49998755  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.21 cputime=6.755 memavail=3325028 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 272.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13585 bytes_read=21079 bytes_retransmit=9 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008364 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1275 bytes_read=5918 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999723 adj=49998646  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.21 cputime=6.775 memavail=3331748 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 273.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13591 bytes_read=21185 bytes_retransmit=9 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008385 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1281 bytes_read=5934 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999720 adj=49998614  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.21 cputime=6.793 memavail=3331748 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 274.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13597 bytes_read=21306 bytes_retransmit=9 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008366 host: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=1287 bytes_read=5949 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999713 adj=49998550  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.21 cputime=6.811 memavail=3331748 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 275.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13603 bytes_read=21439 bytes_retransmit=9 bytes_invalid=0 send_seq=834 receive_seq=834 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008357 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1293 bytes_read=5977 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999708 adj=49998527  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.19 cputime=6.830 memavail=3331248 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 276.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13609 bytes_read=21542 bytes_retransmit=9 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008382 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1299 bytes_read=5992 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999705 adj=49998510  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.19 cputime=6.848 memavail=3331256 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 277.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13615 bytes_read=21663 bytes_retransmit=9 bytes_invalid=0 send_seq=836 receive_seq=836 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008371 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1305 bytes_read=6007 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999705 adj=49998471  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.19 cputime=6.866 memavail=3331256 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 278.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13621 bytes_read=21784 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008365 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1311 bytes_read=6022 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999703 adj=49998543  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.19 cputime=6.885 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 279.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13627 bytes_read=21890 bytes_retransmit=9 bytes_invalid=0 send_seq=838 receive_seq=838 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008356 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1317 bytes_read=6038 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999698 adj=49998545  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.19 cputime=6.903 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 280.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13633 bytes_read=22025 bytes_retransmit=9 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008368 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1323 bytes_read=6067 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999695 adj=49998528  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.17 cputime=6.921 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 281.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13639 bytes_read=22146 bytes_retransmit=9 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008393 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1329 bytes_read=6083 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999692 adj=49998500  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.17 cputime=6.940 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 282.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13645 bytes_read=22252 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008383 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1335 bytes_read=6099 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999692 adj=49998450  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.17 cputime=6.958 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 283.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13651 bytes_read=22373 bytes_retransmit=9 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008374 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1341 bytes_read=6115 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999687 adj=49998517  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.17 cputime=6.976 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 284.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13663 bytes_read=22510 bytes_retransmit=9 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008348 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1347 bytes_read=6131 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999684 adj=49998500  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.17 cputime=6.996 memavail=3330500 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 285.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13669 bytes_read=22630 bytes_retransmit=9 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008330 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1353 bytes_read=6160 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999680 adj=49998540  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=7.014 memavail=3329492 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 286.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13675 bytes_read=22747 bytes_retransmit=9 bytes_invalid=0 send_seq=846 receive_seq=846 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008318 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1359 bytes_read=6176 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999675 adj=49998538  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=7.033 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 287.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13681 bytes_read=22866 bytes_retransmit=9 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008306 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1365 bytes_read=6192 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999670 adj=49998514  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.16 cputime=7.051 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 288.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13687 bytes_read=22972 bytes_retransmit=9 bytes_invalid=0 send_seq=848 receive_seq=848 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008294 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1371 bytes_read=6208 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999666 adj=49998502  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=7.070 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 289.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13693 bytes_read=23093 bytes_retransmit=9 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008297 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=1377 bytes_read=6224 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999660 adj=49998497  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=7.087 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 290.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13699 bytes_read=23228 bytes_retransmit=9 bytes_invalid=0 send_seq=850 receive_seq=850 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008283 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1383 bytes_read=6253 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999656 adj=49998446  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.15 cputime=7.106 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 291.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13705 bytes_read=23334 bytes_retransmit=9 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008272 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1389 bytes_read=6269 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999651 adj=49998463  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.15 cputime=7.123 memavail=3329512 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 292.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13711 bytes_read=23455 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008267 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1395 bytes_read=6285 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999648 adj=49998453  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.15 cputime=7.141 memavail=3329520 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 293.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13717 bytes_read=23576 bytes_retransmit=9 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008254 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1401 bytes_read=6301 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999643 adj=49998454  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.15 cputime=7.159 memavail=3329520 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 294.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13723 bytes_read=23682 bytes_retransmit=9 bytes_invalid=0 send_seq=854 receive_seq=854 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008250 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=1407 bytes_read=6317 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999638 adj=49998450  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.15 cputime=7.177 memavail=3329520 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 295.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=13729 bytes_read=23817 bytes_retransmit=9 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008245 host: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=1413 bytes_read=6346 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999635 adj=49998429  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.13 cputime=7.194 memavail=3328436 print_time=46.158 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-250-ge9534d6f-dirty'
Untracked files: klippy/extras/stable_z_home.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Fri Jul 28 16:30:58 2023 (1690572658.4 12.7)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE={printer[printer.toolhead.extruder].target}
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	M109 S{last_extruder_temp}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}
	SET_GCODE_OFFSET X=0 Y=0
	G90
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing}
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M190 S{BED_TEMP}
	
	G90
	
	G28
	
	G92 E0
	
	M82
	
	G1 Z10 F480
	G1 X6 Y20 F18000
	
	BED_MESH_PROFILE LOAD=default
	G1 X0 Y-5 Z0.15 F240
	
	M109 S{EXTRUDER_TEMP}
	G1 E15 F600
	
	
	
	
	
	G92 E0
	G1 Z0.3 F480

[gcode_macro PRINT_END]
gcode = 
	G1 E-15 F2400
	
	M140 S0
	M104 S0
	M106 S0
	
	G1 X117.5 Y200 Z220 F18000
	
	M84

[gcode_macro _HOME_Y]
gcode = 
	{% set RUN_CURRENT_Y = printer.configfile.settings['tmc5160 stepper_y'].run_current|float %}
	{% set HOME_CURRENT_Y = 0.7 %}
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={HOME_CURRENT_Y}
	SET_TMC_FIELD STEPPER=stepper_y FIELD=sgt VALUE=2
	
	G28 Y
	
	G91
	G1 Y10 F18000
	
	G4 P3000
	
	SET_TMC_CURRENT STEPPER=stepper_y CURRENT={RUN_CURRENT_Y}

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[manual_probe]

[gcode_macro PROBE_XE]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X66.5 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_XD]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X245 Y117.5 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YF]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y20 F12000
	PROBE_CALIBRATE

[gcode_macro PROBE_YT]
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	{% else %}
	G28
	{% endif %}
	G90
	BED_MESH_CLEAR
	G1 Z10 F420
	G1 X165 Y215 F12000
	PROBE_CALIBRATE

[gcode_macro G29]
gcode = 
	G28
	G90
	G21
	G92 E0
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE PROFILE=default METHOD=manual

[gcode_macro LOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=load_state
	
	G91
	G92 E0
	G1 E25 F{max_velocity}
	G1 E10 F{speed}
	
	
	RESTORE_GCODE_STATE NAME=load_state

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	{% set speed = params.SPEED|default(300) %}
	{% set max_velocity = printer.configfile.settings['extruder'].max_extrude_only_velocity %}
	SAVE_GCODE_STATE NAME=unload_state
	G91
	
	G92 E0
	G1 E25 F{speed}
	G1 E-10 F{max_velocity}
	
	
	RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro Z_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=-5  VELOCITY=7 ACCEL=125
	FORCE_MOVE STEPPER=stepper_z  DISTANCE=5   VELOCITY=7 ACCEL=125

[gcode_macro TURN_Z_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_z

[gcode_macro XY_FORCE_MOVE]
gcode = 
	FORCE_MOVE STEPPER=stepper_x DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=20   VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_x DISTANCE=-20  VELOCITY=100 ACCEL=5000
	FORCE_MOVE STEPPER=stepper_y DISTANCE=-20  VELOCITY=100 ACCEL=5000

[gcode_macro TURN_XY_ON]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x
	SET_STEPPER_ENABLE STEPPER=stepper_y

[sdcard_loop]

[mcu host]
serial = /tmp/klipper_host_mcu

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32h743xx_4B003E001851303232383230-if00
restart_method = command

[printer]
kinematics = corexz
max_velocity = 500
max_accel = 9000
max_accel_to_decel = 4500
max_z_velocity = 50
max_z_accel = 2500
square_corner_velocity = 10.0

[force_move]
enable_force_move = true

[exclude_object]

[gcode_arcs]
resolution = 0.1

[stepper_x]
step_pin = PD4
dir_pin = !PD3
enable_pin = !PD6
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = PC1
position_min = 0
position_endstop = 236
position_max = 236
homing_positive_dir = true
homing_speed = 25
homing_retract_dist = 5
second_homing_speed = 10

[tmc5160 stepper_x]
cs_pin = PD5
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[stepper_y]
step_pin = PA15
dir_pin = PA8
enable_pin = !PD1
rotation_distance = 32
microsteps = 64
full_steps_per_rotation = 200
endstop_pin = tmc5160_stepper_y:virtual_endstop
position_min = -7.5
position_endstop = -7.5
position_max = 250
homing_speed = 40
homing_retract_dist = 0

[tmc5160 stepper_y]
cs_pin = PD0
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.05
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0
diag1_pin = !PC3

[stepper_z]
step_pin = PE2
dir_pin = !PE3
enable_pin = !PE0
rotation_distance = 32
microsteps = 32
full_steps_per_rotation = 400
endstop_pin = probe:z_virtual_endstop
position_min = -0.3
position_max = 235
homing_speed = 25
second_homing_speed = 5
homing_retract_dist = 6.0

[tmc5160 stepper_z]
cs_pin = PE1
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 1.176
sense_resistor = 0.075
interpolate = true
stealthchop_threshold = 0

[extruder]
max_extrude_only_distance = 110
max_extrude_only_velocity = 60
step_pin = PD11
dir_pin = PD10
enable_pin = !PD13
rotation_distance = 4.637
microsteps = 16
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB3
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PA2
min_temp = 0
max_temp = 305
min_extrude_temp = 0
pressure_advance = 0.038
pressure_advance_smooth_time = 0.03
control = pid
pid_kp = 17.204
pid_ki = 1.349
pid_kd = 54.838

[tmc5160 extruder]
cs_pin = PD12
spi_software_miso_pin = PE15
spi_software_mosi_pin = PE13
spi_software_sclk_pin = PE14
run_current = 0.85
sense_resistor = 0.075
interpolate = true
hold_current = 0.1
stealthchop_threshold = 0

[heater_bed]
heater_pin = PD7
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA1
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.130
pid_ki = 0.993
pid_kd = 1202.863

[verify_heater extruder]
check_gain_time = 200
hysteresis = 5

[fan]
pin = PB6
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5

[heater_fan my_nozzle_fan]
pin = PB7
max_power = 1.0
shutdown_speed = 0
kick_start_time = 0.5
heater = extruder
heater_temp = 80
fan_speed = 1.0

[input_shaper]
shaper_type_x = zv
shaper_freq_x = 52.6
shaper_type_y = mzv
shaper_freq_y = 30.4

[safe_z_home]
home_xy_position = 117.5, 92.5
speed = 250
z_hop = 10
z_hop_speed = 25

[bltouch]
sensor_pin = ^PC13
control_pin = PE5
x_offset = 0.0
y_offset = 25.0
speed = 5
lift_speed = 25
stow_on_each_sample = false
samples = 3
probe_with_touch_mode = true
z_offset = 1.321

[bed_mesh]
speed = 200
mesh_min = 20, 17.5
mesh_max = 215, 190
horizontal_move_z = 6
probe_count = 5, 5
fade_start = 0.6
fade_end = 3.0
split_delta_z = 0.01
move_check_distance = 3.0
mesh_pps = 3, 3
bicubic_tension = 0.4
algorithm = bicubic

[screws_tilt_adjust]
screw1 = 26.5, 10
screw1_name = frontal esq
screw2 = 26.5, 182
screw2_name = traseiro esq
screw3 = 203.5, 182
screw3_name = traseiro dir
screw4 = 203.5, 10
screw4_name = frontal dir
horizontal_move_z = 6
speed = 300
screw_thread = CW-M4

[idle_timeout]
gcode = 
	
	
	
	TURN_OFF_HEATERS
	M84
timeout = 2700

[bed_mesh default]
version = 1
points = 
	0.119167, -0.055833, -0.035000, -0.011667, 0.107500
	0.137500, 0.015833, 0.034167, 0.052500, 0.150833
	0.122500, 0.009167, 0.030000, 0.068333, 0.146667
	0.132500, 0.015833, 0.014167, 0.059167, 0.129167
	0.130000, -0.014167, 0.013333, 0.024167, 0.115000
x_count = 5
y_count = 5
mesh_x_pps = 3
mesh_y_pps = 3
algo = bicubic
tension = 0.4
min_x = 20.0
max_x = 215.0
min_y = 17.5
max_y = 189.98
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi2b=PI2,PI3,PI1 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 BUS_PINS_spi5=PF8,PF9,PF7 BUS_PINS_spi5a=PH7,PF11,PH6 BUS_PINS_spi6=PG12,PG14,PG13 CLOCK_FREQ=400000000 MCU=stm32h743xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'host': Starting connect
Loaded MCU 'host' 113 commands (v0.11.0-235-gb9247810 / gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2)
MCU 'host' config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'host' printer configuration...
Configured MCU 'host' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks client 548028748128: New connection
webhooks client 548028748128: Client info {'program': 'Moonraker', 'version': 'v0.8.0-125-g937c766'}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (20.0, -7.5)    | (20.0, 17.5)
  1   | (68.8, -7.5)    | (68.8, 17.5)
  2   | (117.5, -7.5)   | (117.5, 17.5)
  3   | (166.2, -7.5)   | (166.2, 17.5)
  4   | (215.0, -7.5)   | (215.0, 17.5)
  5   | (215.0, 35.6)   | (215.0, 60.6)
  6   | (166.2, 35.6)   | (166.2, 60.6)
  7   | (117.5, 35.6)   | (117.5, 60.6)
  8   | (68.8, 35.6)    | (68.8, 60.6)
  9   | (20.0, 35.6)    | (20.0, 60.6)
  10  | (20.0, 78.7)    | (20.0, 103.7)
  11  | (68.8, 78.7)    | (68.8, 103.7)
  12  | (117.5, 78.7)   | (117.5, 103.7)
  13  | (166.2, 78.7)   | (166.2, 103.7)
  14  | (215.0, 78.7)   | (215.0, 103.7)
  15  | (215.0, 121.9)  | (215.0, 146.9)
  16  | (166.2, 121.9)  | (166.2, 146.9)
  17  | (117.5, 121.9)  | (117.5, 146.9)
  18  | (68.8, 121.9)   | (68.8, 146.9)
  19  | (20.0, 121.9)   | (20.0, 146.9)
  20  | (20.0, 165.0)   | (20.0, 190.0)
  21  | (68.8, 165.0)   | (68.8, 190.0)
  22  | (117.5, 165.0)  | (117.5, 190.0)
  23  | (166.2, 165.0)  | (166.2, 190.0)
  24  | (215.0, 165.0)  | (215.0, 190.0)
Stats 16.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3056 bytes_read=5941 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009593 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=813 bytes_read=4493 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50005257 adj=50005132  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.24 cputime=1.998 memavail=3333432 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548028748128
webhooks: registering remote method 'reboot_machine' for connection id: 548028748128
webhooks: registering remote method 'pause_job_queue' for connection id: 548028748128
webhooks: registering remote method 'start_job_queue' for connection id: 548028748128
Stats 17.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3062 bytes_read=6047 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008733 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=819 bytes_read=4509 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50002164 adj=50003751  heater_bed: target=0 temp=25.6 pwm=0.000 sysload=1.24 cputime=2.021 memavail=3370272 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 18.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3068 bytes_read=6153 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400009305 host: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=825 bytes_read=4525 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50001823 adj=49999032  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=2.030 memavail=3360140 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 19.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3074 bytes_read=6259 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008500 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000017 bytes_write=831 bytes_read=4555 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000905 adj=49998770  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.24 cputime=2.048 memavail=3335884 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 20.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000018 mcu_task_stddev=0.000112 bytes_write=3080 bytes_read=6395 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008369 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000017 bytes_write=837 bytes_read=4571 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000546 adj=49997539  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=2.058 memavail=3340084 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 21.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3086 bytes_read=6516 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008107 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000017 bytes_write=843 bytes_read=4587 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000438 adj=49997321  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=2.068 memavail=3343396 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 22.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3092 bytes_read=6622 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007998 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000017 bytes_write=849 bytes_read=4603 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000261 adj=49997677  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=2.081 memavail=3336280 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 23.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3098 bytes_read=6753 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007869 host: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000017 bytes_write=855 bytes_read=4619 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000155 adj=49997660  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=2.091 memavail=3327648 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 24.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3104 bytes_read=6859 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007802 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=861 bytes_read=4648 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000126 adj=49997793  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.22 cputime=2.100 memavail=3323312 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 25.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000002 mcu_task_stddev=0.000004 bytes_write=3110 bytes_read=6965 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007843 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=867 bytes_read=4664 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000110 adj=49998072  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=2.110 memavail=3333284 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 26.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3116 bytes_read=7115 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007729 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=873 bytes_read=4680 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000046 adj=49998266  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.37 cputime=2.118 memavail=3332456 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 27.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3122 bytes_read=7221 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007649 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=879 bytes_read=4696 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000121 adj=49998263  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=2.127 memavail=3332352 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 28.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3128 bytes_read=7342 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007772 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=885 bytes_read=4712 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000162 adj=49998793  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=2.141 memavail=3335876 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 29.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3134 bytes_read=7463 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007894 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=891 bytes_read=4741 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000139 adj=49998992  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.37 cputime=2.155 memavail=3335628 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 30.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3140 bytes_read=7569 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008029 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=897 bytes_read=4757 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000113 adj=49998871  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=2.167 memavail=3332428 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 31.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3146 bytes_read=7704 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008001 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=903 bytes_read=4773 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000068 adj=49998746  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=2.174 memavail=3331348 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 32.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3152 bytes_read=7825 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007925 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=909 bytes_read=4789 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000035 adj=49998660  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.42 cputime=2.181 memavail=3331348 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 33.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3158 bytes_read=7929 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007906 host: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=915 bytes_read=4805 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=50000004 adj=49998663  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=2.189 memavail=3331096 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 34.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3164 bytes_read=8047 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007895 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=921 bytes_read=4834 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999980 adj=49998664  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.42 cputime=2.196 memavail=3331096 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 35.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3170 bytes_read=8168 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007886 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=927 bytes_read=4850 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999993 adj=49998635  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=2.205 memavail=3330136 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 36.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3176 bytes_read=8288 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007987 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=933 bytes_read=4866 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999993 adj=49998801  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=2.217 memavail=3328524 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 37.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3182 bytes_read=8409 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007968 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=939 bytes_read=4882 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999983 adj=49998779  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=2.225 memavail=3328376 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 38.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3188 bytes_read=8530 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007960 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=945 bytes_read=4898 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999968 adj=49998788  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=2.232 memavail=3327812 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 39.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3200 bytes_read=8652 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007938 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=951 bytes_read=4927 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999965 adj=49998758  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.38 cputime=2.241 memavail=3327648 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 40.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3206 bytes_read=8773 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400007942 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=957 bytes_read=4943 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999963 adj=49998814  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=2.248 memavail=3327652 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 41.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3212 bytes_read=8908 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008002 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=963 bytes_read=4959 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999952 adj=49998834  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=2.258 memavail=3327656 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 42.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3218 bytes_read=9014 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008061 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=969 bytes_read=4975 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999962 adj=49998773  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=2.269 memavail=3326584 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 43.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3224 bytes_read=9135 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008044 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=975 bytes_read=4991 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999954 adj=49998834  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.27 cputime=2.276 memavail=3327276 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 44.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3230 bytes_read=9250 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008051 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=981 bytes_read=5007 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999948 adj=49998826  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.27 cputime=2.284 memavail=3327276 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 45.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3236 bytes_read=9356 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008025 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=987 bytes_read=5036 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999944 adj=49998807  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=2.291 memavail=3327072 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 46.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3242 bytes_read=9491 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008004 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=993 bytes_read=5052 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999941 adj=49998838  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.17 cputime=2.298 memavail=3327072 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 47.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3248 bytes_read=9612 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008054 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=999 bytes_read=5068 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999938 adj=49998857  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=2.309 memavail=3326596 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 48.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3254 bytes_read=9718 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008055 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=1005 bytes_read=5084 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999961 adj=49998806  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.17 cputime=2.320 memavail=3325876 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 49.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3260 bytes_read=9839 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008033 host: mcu_awake=0.000 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=1011 bytes_read=5100 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999964 adj=49999022  heater_bed: target=0 temp=25.7 pwm=0.000 sysload=1.17 cputime=2.327 memavail=3326720 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 50.4: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000001 mcu_task_stddev=0.000001 bytes_write=3266 bytes_read=9960 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=400008014 host: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=1017 bytes_read=5129 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=49999976 adj=49999050  heater_bed: target=0 temp=25.8 pwm=0.000 sysload=1.08 cputime=2.335 memavail=3326724 print_time=0.014 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000