[ERROR] 2020-01-01 08:00:25,587 [root] [serialhdl:_get_identify_data:72] mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/usr/share/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/usr/share/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/usr/share/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/usr/share/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
[ERROR] 2020-01-01 08:00:30,821 [root] [serialhdl:_get_identify_data:72] mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/usr/share/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/usr/share/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/usr/share/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/usr/share/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
[ERROR] 2020-01-01 08:00:32,269 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2020-01-01 01:02:13,953 [root] [klippy:_connect:207] MCU error during connect
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/klippy.py", line 160, in _connect
    self.send_event("klippy:mcu_identify")
  File "/usr/share/klipper/klippy/klippy.py", line 386, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/usr/share/klipper/klippy/mcu.py", line 804, in _mcu_identify
    raise error(str(e))
error: mcu 'mcu': Unable to connect
[ERROR] 2022-10-19 19:11:43,345 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 19:11:54,324 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:12:30,462 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:13:53,878 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 19:13:58,528 [root] [klippy:invoke_shutdown:366] Transition to shutdown state: Lost communication with MCU 'mcu'
[ERROR] 2022-10-19 19:13:58,530 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Shutdown
[ERROR] 2022-10-19 19:14:32,788 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 19:14:32,801 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 19:14:44,010 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:16:09,720 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.035000
[ERROR] 2022-10-19 19:16:10,676 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 19:16:11,214 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.965 <-- ??????
[ERROR] 2022-10-19 19:18:34,162 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.865 <-- 4.965
[ERROR] 2022-10-19 19:18:35,807 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.765 <-- 4.865
[ERROR] 2022-10-19 19:18:38,029 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.665 <-- 4.765
[ERROR] 2022-10-19 19:18:40,281 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.565 <-- 4.665
[ERROR] 2022-10-19 19:18:53,742 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 3.565 <-- 4.565
[ERROR] 2022-10-19 19:18:56,794 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.565 <-- 3.565
[ERROR] 2022-10-19 19:19:20,857 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.565 <-- 2.565
[ERROR] 2022-10-19 19:19:37,958 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.565 <-- 1.565
[ERROR] 2022-10-19 19:19:38,577 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -0.435 <-- 0.565
[ERROR] 2022-10-19 19:19:39,176 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -1.435 <-- -0.435
[ERROR] 2022-10-19 19:19:43,156 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -2.435 <-- -1.435
[ERROR] 2022-10-19 19:19:47,005 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.435 --> -1.435 <-- -1.435
[ERROR] 2022-10-19 19:19:50,523 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.435 --> -1.935 <-- -1.435
[ERROR] 2022-10-19 19:19:54,091 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -2.435 <-- -1.935
[ERROR] 2022-10-19 19:19:57,501 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.435 --> -2.335 <-- -1.935
[ERROR] 2022-10-19 19:20:04,900 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.300
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-19 19:25:29,927 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,35.000 is z=-3.270000
[ERROR] 2022-10-19 19:25:33,421 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 117.000,35.000 is z=-0.680000
[ERROR] 2022-10-19 19:25:36,381 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 157.000,35.000 is z=-0.595000
[ERROR] 2022-10-19 19:25:39,163 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 197.000,35.000 is z=0.207500
[ERROR] 2022-10-19 19:25:41,067 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 237.000,35.000 is z=3.795000
[ERROR] 2022-10-19 19:25:42,985 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 237.000,75.000 is z=0.142500
[ERROR] 2022-10-19 19:25:45,643 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 197.000,75.000 is z=0.087500
[ERROR] 2022-10-19 19:25:48,322 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 157.000,75.000 is z=0.042500
[ERROR] 2022-10-19 19:25:51,020 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 117.000,75.000 is z=-0.007500
[ERROR] 2022-10-19 19:25:53,745 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,75.000 is z=-0.102500
[ERROR] 2022-10-19 19:25:56,495 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,115.000 is z=-0.130000
[ERROR] 2022-10-19 19:25:59,238 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 117.000,115.000 is z=-0.070000
[ERROR] 2022-10-19 19:26:01,960 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 157.000,115.000 is z=-0.020000
[ERROR] 2022-10-19 19:26:04,666 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 197.000,115.000 is z=0.010000
[ERROR] 2022-10-19 19:26:07,359 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 237.000,115.000 is z=0.042500
[ERROR] 2022-10-19 19:26:10,074 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 237.000,155.000 is z=-0.100000
[ERROR] 2022-10-19 19:26:12,819 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 197.000,155.000 is z=-0.100000
[ERROR] 2022-10-19 19:26:15,561 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 157.000,155.000 is z=-0.070000
[ERROR] 2022-10-19 19:26:18,295 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 117.000,155.000 is z=-0.077500
[ERROR] 2022-10-19 19:26:21,034 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,155.000 is z=-0.102500
[ERROR] 2022-10-19 19:26:23,759 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,195.000 is z=0.000000
[ERROR] 2022-10-19 19:26:26,468 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 117.000,195.000 is z=-0.025000
[ERROR] 2022-10-19 19:26:29,192 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 157.000,195.000 is z=-0.080000
[ERROR] 2022-10-19 19:26:31,941 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 197.000,195.000 is z=-0.142500
[ERROR] 2022-10-19 19:26:34,713 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 237.000,195.000 is z=-0.195000
[ERROR] 2022-10-19 19:26:34,724 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Mesh Bed Leveling Complete
[ERROR] 2022-10-19 19:26:34,727 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Bed Mesh state has been saved to profile [default]
// for the current session.  The SAVE_CONFIG command will
// update the printer config file and restart the printer.
[ERROR] 2022-10-19 19:26:48,006 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// {"code":"key61, "msg":"Unknown command:ACCEPT", "values": ["ACCEPT"]}
[ERROR] 2022-10-19 19:26:49,228 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 19:26:55,345 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:27:42,667 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.042500
[ERROR] 2022-10-19 19:27:43,623 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 19:27:43,632 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.258 <-- ??????
[ERROR] 2020-01-01 01:00:28,773 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:36:45,784 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:37:35,827 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:37:49,962 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:38:48,754 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.015000
[ERROR] 2022-10-19 19:38:49,709 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 19:38:50,243 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.285 <-- ??????
[ERROR] 2022-10-19 19:43:25,145 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.015000
[ERROR] 2022-10-19 19:43:26,100 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 19:43:26,107 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.285 <-- ??????
[ERROR] 2022-10-19 19:43:51,331 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 6.285 <-- 7.285
[ERROR] 2022-10-19 19:43:59,069 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 5.285 <-- 6.285
[ERROR] 2022-10-19 19:44:02,403 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.285 <-- 5.285
[ERROR] 2022-10-19 19:44:02,920 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 3.285 <-- 4.285
[ERROR] 2022-10-19 19:44:05,991 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.285 <-- 3.285
[ERROR] 2022-10-19 19:44:08,962 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.285 <-- 2.285
[ERROR] 2022-10-19 19:44:13,500 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.285 <-- 1.285
[ERROR] 2022-10-19 19:44:16,975 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -0.715 <-- 0.285
[ERROR] 2022-10-19 19:44:19,744 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> 0.285 <-- 1.285
[ERROR] 2022-10-19 19:44:23,604 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.215 <-- 0.285
[ERROR] 2022-10-19 19:44:27,423 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.215 --> 0.285 <-- 1.285
[ERROR] 2022-10-19 19:44:29,268 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.215 --> 0.185 <-- 0.285
[ERROR] 2022-10-19 19:44:31,691 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.215 --> 0.085 <-- 0.185
[ERROR] 2022-10-19 19:44:34,465 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.215 --> -0.015 <-- 0.085
[ERROR] 2022-10-19 19:44:35,260 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.215 --> -0.115 <-- -0.015
[ERROR] 2022-10-19 19:44:38,377 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.215 <-- -0.115
[ERROR] 2022-10-19 19:44:44,540 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.315 <-- -0.215
[ERROR] 2022-10-19 19:44:50,017 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.415 <-- -0.315
[ERROR] 2022-10-19 19:44:53,703 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.515 <-- -0.415
[ERROR] 2022-10-19 19:45:06,151 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -1.015 <-- -0.715
[ERROR] 2022-10-19 19:45:10,583 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.115 --> -0.015 <-- -0.015
[ERROR] 2022-10-19 19:45:14,415 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.515 <-- -0.415
[ERROR] 2022-10-19 19:45:20,892 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -1.015 <-- -0.715
[ERROR] 2022-10-19 19:45:28,990 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -1.015 --> -0.915 <-- -0.715
[ERROR] 2022-10-19 19:45:31,850 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.815 <-- -0.715
[ERROR] 2022-10-19 19:45:34,463 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.815 --> -0.715 <-- -0.515
[ERROR] 2022-10-19 19:45:37,499 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.615 <-- -0.515
[ERROR] 2022-10-19 19:45:38,568 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.615 --> -0.515 <-- -0.415
[ERROR] 2022-10-19 19:45:40,490 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.515 --> -0.415 <-- -0.415
[ERROR] 2022-10-19 19:45:43,345 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.415 --> -0.315 <-- -0.315
[ERROR] 2022-10-19 19:45:48,611 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.515 --> -0.415 <-- -0.415
[ERROR] 2022-10-19 19:45:52,766 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.615 --> -0.515 <-- -0.415
[ERROR] 2022-10-19 19:45:55,927 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.615 <-- -0.515
[ERROR] 2022-10-19 19:46:00,059 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.815 --> -0.715 <-- -0.615
[ERROR] 2022-10-19 19:46:00,788 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.815 <-- -0.715
[ERROR] 2022-10-19 19:46:07,543 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.865 <-- -0.815
[ERROR] 2022-10-19 19:46:09,030 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -1.015 --> -0.915 <-- -0.865
[ERROR] 2022-10-19 19:46:11,203 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.865 <-- -0.815
[ERROR] 2022-10-19 19:46:12,233 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.865 --> -0.815 <-- -0.715
[ERROR] 2022-10-19 19:46:13,333 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.815 --> -0.765 <-- -0.715
[ERROR] 2022-10-19 19:46:17,443 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.865 --> -0.815 <-- -0.765
[ERROR] 2022-10-19 19:46:21,307 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.865 <-- -0.815
[ERROR] 2022-10-19 19:46:22,755 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -1.015 --> -0.915 <-- -0.865
[ERROR] 2022-10-19 19:46:24,357 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.915 --> -0.865 <-- -0.815
[ERROR] 2022-10-19 19:46:24,925 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.865 --> -0.815 <-- -0.765
[ERROR] 2022-10-19 19:46:25,532 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.815 --> -0.765 <-- -0.715
[ERROR] 2022-10-19 19:46:26,200 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.765 --> -0.715 <-- -0.615
[ERROR] 2022-10-19 19:46:30,133 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.715 --> -0.665 <-- -0.615
[ERROR] 2022-10-19 19:46:33,889 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.950
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-19 19:46:38,634 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 19:46:44,450 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:47:22,770 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 77.000,35.000 is z=-5.087500
[ERROR] 2022-10-19 19:47:24,875 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key194", "msg": "BLTouch failed to deploy.", "values": []}
[ERROR] 2022-10-19 19:47:25,926 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Failed to verify BLTouch probe is raised; retrying.
[ERROR] 2022-10-19 19:47:52,109 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.017500
[ERROR] 2022-10-19 19:47:53,064 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 19:47:53,070 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.932 <-- ??????
[ERROR] 2022-10-19 19:48:12,055 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 19:48:17,901 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 19:59:48,648 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 140.000,155.000 is z=-0.072500
[ERROR] 2022-10-19 19:59:49,608 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Result is z=2.877500
[ERROR] 2022-10-19 20:00:43,541 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// mcu: stepper_x:10850 stepper_y:8015 stepper_z:-20249
// stepper: stepper_x:140.000000 stepper_y:155.000000 stepper_z:2.877500
// kinematic: X:140.000000 Y:155.000000 Z:2.877500
// toolhead: X:140.000000 Y:155.000000 Z:2.877500 E:0.000000
// gcode: X:140.000000 Y:155.000000 Z:2.954581 E:0.000000
// gcode base: X:0.000000 Y:0.000000 Z:0.000000 E:0.000000
// gcode homing: X:0.000000 Y:0.000000 Z:0.000000
[ERROR] 2020-01-01 01:00:23,801 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 20:06:43,712 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 20:19:50,270 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:19:50,284 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 20:19:56,091 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 20:20:23,594 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key95","msg":"Must home axis first: 0.000 0.000 5.000 [0.000]", "values":[0.000, 0.000, 5.000, 0.000]}
[ERROR] 2022-10-19 20:21:25,900 [root] [klippy:invoke_shutdown:366] Transition to shutdown state: Shutdown due to webhooks request
[ERROR] 2022-10-19 20:21:25,903 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Shutdown
[ERROR] 2022-10-19 20:21:26,347 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code": "key5", "msg": "Probing failed due to printer shutdown"}
[ERROR] 2020-01-01 01:00:22,524 [root] [klippy:_connect:207] MCU error during connect
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/klippy.py", line 164, in _connect
    cb()
  File "/usr/share/klipper/klippy/mcu.py", line 748, in _connect
    config_params = self._send_get_config()
  File "/usr/share/klipper/klippy/mcu.py", line 735, in _send_get_config
    self._name, self._name))
error: {"code": "key298", "msg": "Can not update MCU mcu config as it is shutdown", "values":["mcu"]}
[ERROR] 2022-10-19 20:23:09,010 [root] [klippy:_connect:207] MCU error during connect
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/klippy.py", line 164, in _connect
    cb()
  File "/usr/share/klipper/klippy/mcu.py", line 748, in _connect
    config_params = self._send_get_config()
  File "/usr/share/klipper/klippy/mcu.py", line 735, in _send_get_config
    self._name, self._name))
error: {"code": "key298", "msg": "Can not update MCU mcu config as it is shutdown", "values":["mcu"]}
[ERROR] 2022-10-19 20:23:16,020 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:23:18,624 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:23:18,638 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 20:23:28,587 [root] [klippy:_connect:207] MCU error during connect
Traceback (most recent call last):
  File "/usr/share/klipper/klippy/klippy.py", line 164, in _connect
    cb()
  File "/usr/share/klipper/klippy/mcu.py", line 748, in _connect
    config_params = self._send_get_config()
  File "/usr/share/klipper/klippy/mcu.py", line 735, in _send_get_config
    self._name, self._name))
error: {"code": "key298", "msg": "Can not update MCU mcu config as it is shutdown", "values":["mcu"]}
[ERROR] 2022-10-19 20:23:37,356 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:23:37,370 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 20:23:48,335 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 20:25:38,847 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 160.000,120.000 is z=-0.015000
[ERROR] 2022-10-19 20:25:39,801 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-19 20:25:40,345 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.935 <-- ??????
[ERROR] 2022-10-19 20:27:59,320 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:27:59,334 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 20:28:05,067 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-19 20:28:46,544 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-19 20:28:46,559 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-19 20:28:52,281 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2020-01-01 01:00:24,847 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:17:35,802 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2020-01-01 01:00:26,455 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:26:54,703 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:31:45,784 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:31:45,798 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:31:51,513 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:37:09,401 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:37:09,415 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:37:15,128 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:38:11,058 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:38:11,072 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:38:16,878 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:40:08,573 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:40:08,587 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:40:14,395 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:41:45,746 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:41:48,720 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:42:02,588 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:42:56,899 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:42:56,913 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:43:02,613 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:43:46,341 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:43:46,355 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:43:52,101 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:44:26,042 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:44:26,056 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:44:31,826 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:45:16,145 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:45:16,159 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:45:21,859 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:47:54,633 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:51:24,191 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:51:24,206 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:51:29,925 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:52:12,609 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.015000
[ERROR] 2022-10-20 06:52:13,563 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 06:52:14,112 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.935 <-- ??????
[ERROR] 2022-10-20 06:52:57,258 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 06:52:57,268 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:53:03,059 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:53:29,452 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 06:53:30,407 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 06:53:30,414 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.932 <-- ??????
[ERROR] 2022-10-20 06:54:14,744 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 06:54:15,698 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 06:54:15,705 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.932 <-- ??????
[ERROR] 2022-10-20 06:54:35,974 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 06:54:41,762 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 06:55:21,656 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 06:55:49,439 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 06:58:33,993 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 06:58:34,948 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 06:58:34,954 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.932 <-- ??????
[ERROR] 2022-10-20 06:59:06,675 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.933 <-- 7.932
[ERROR] 2022-10-20 06:59:09,035 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -2.067 <-- 2.933
[ERROR] 2022-10-20 06:59:11,513 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.067 --> 2.933 <-- 7.932
[ERROR] 2022-10-20 06:59:41,884 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=0.012500
[ERROR] 2022-10-20 06:59:42,838 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 06:59:42,845 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.962 <-- ??????
[ERROR] 2022-10-20 06:59:56,919 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.963 <-- 7.962
[ERROR] 2022-10-20 07:00:00,691 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.463 <-- 2.963
[ERROR] 2022-10-20 07:00:02,466 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.963 <-- 2.463
[ERROR] 2022-10-20 07:00:04,299 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.463 <-- 1.963
[ERROR] 2022-10-20 07:00:08,616 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.363 <-- 1.463
[ERROR] 2022-10-20 07:00:10,438 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.263 <-- 1.363
[ERROR] 2022-10-20 07:00:12,960 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.163 <-- 1.263
[ERROR] 2022-10-20 07:00:16,211 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.063 <-- 1.163
[ERROR] 2022-10-20 07:00:18,657 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.963 <-- 1.063
[ERROR] 2022-10-20 07:00:22,132 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.863 <-- 0.963
[ERROR] 2022-10-20 07:00:24,816 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.763 <-- 0.863
[ERROR] 2022-10-20 07:00:27,254 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.663 <-- 0.763
[ERROR] 2022-10-20 07:00:30,987 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.563 <-- 0.663
[ERROR] 2022-10-20 07:00:35,008 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.463 <-- 0.563
[ERROR] 2022-10-20 07:00:43,500 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.363 <-- 0.463
[ERROR] 2022-10-20 07:00:47,241 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.263 <-- 0.363
[ERROR] 2022-10-20 07:00:51,288 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.163 <-- 0.263
[ERROR] 2022-10-20 07:00:54,875 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: 0.163 --> 0.213 <-- 0.263
[ERROR] 2022-10-20 07:01:01,354 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: 0.213 --> 0.263 <-- 0.363
[ERROR] 2022-10-20 07:01:06,476 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.700
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 07:01:09,991 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:01:15,791 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:01:59,781 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:02:33,585 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:04:14,947 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:07:39,240 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:16:57,148 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.025000
[ERROR] 2022-10-20 07:16:58,102 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:16:58,111 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.675 <-- ??????
[ERROR] 2022-10-20 07:17:26,412 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:17:32,188 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:17:59,641 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:18:30,475 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 07:18:31,429 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:18:31,438 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.682 <-- ??????
[ERROR] 2022-10-20 07:18:44,396 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.683 <-- 7.682
[ERROR] 2022-10-20 07:18:48,498 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.683 <-- 2.683
[ERROR] 2022-10-20 07:18:51,338 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.683 <-- 1.683
[ERROR] 2022-10-20 07:18:53,148 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -0.317 <-- 0.683
[ERROR] 2022-10-20 07:18:54,610 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> 0.683 <-- 1.683
[ERROR] 2022-10-20 07:18:56,036 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> 0.183 <-- 0.683
[ERROR] 2022-10-20 07:19:02,741 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> 0.083 <-- 0.183
[ERROR] 2022-10-20 07:19:04,309 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> -0.017 <-- 0.083
[ERROR] 2022-10-20 07:19:05,370 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> -0.117 <-- -0.017
[ERROR] 2022-10-20 07:19:06,432 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.317 --> -0.217 <-- -0.117
[ERROR] 2022-10-20 07:19:09,796 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -0.217 --> -0.167 <-- -0.117
[ERROR] 2022-10-20 07:19:13,699 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.850
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 07:19:17,719 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:19:23,525 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:19:53,094 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 07:19:54,048 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:19:54,056 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 07:20:19,972 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:26:11,187 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:26:27,278 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:32:18,092 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 07:32:18,107 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:32:23,785 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:33:31,513 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.017500
[ERROR] 2022-10-20 07:33:32,466 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:33:33,009 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 07:33:44,000 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:33:49,794 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:34:22,663 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 30.000,30.000 is z=-4.147500
[ERROR] 2022-10-20 07:34:25,079 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 70.000,30.000 is z=-0.110000
[ERROR] 2022-10-20 07:34:26,312 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,30.000 is z=1.762500
[ERROR] 2022-10-20 07:34:27,066 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key194", "msg": "BLTouch failed to deploy.", "values": []}
[ERROR] 2022-10-20 07:34:28,120 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Failed to verify BLTouch probe is raised; retrying.
[ERROR] 2022-10-20 07:37:19,315 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.020000
[ERROR] 2022-10-20 07:37:20,273 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:37:20,278 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.830 <-- ??????
[ERROR] 2022-10-20 07:37:26,441 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:37:32,212 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:37:58,179 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.015000
[ERROR] 2022-10-20 07:37:59,133 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:37:59,138 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.835 <-- ??????
[ERROR] 2022-10-20 07:38:10,456 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:38:16,213 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:39:34,772 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.017500
[ERROR] 2022-10-20 07:39:35,726 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:39:35,731 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 07:43:29,502 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 07:43:29,516 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:43:35,255 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:44:28,372 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 07:44:29,326 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:44:29,333 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 07:44:40,750 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:44:46,538 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:45:14,634 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.017500
[ERROR] 2022-10-20 07:45:15,587 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:45:15,595 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 07:45:26,988 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:45:32,724 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:46:03,157 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,127.000 is z=-0.015000
[ERROR] 2022-10-20 07:46:04,111 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:46:04,119 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.835 <-- ??????
[ERROR] 2022-10-20 07:46:30,569 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 07:47:58,339 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 07:47:58,354 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 07:48:04,155 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 07:49:48,005 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.015000
[ERROR] 2022-10-20 07:49:48,959 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 07:49:48,966 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.835 <-- ??????
[ERROR] 2022-10-20 09:56:02,889 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// mcu: stepper_x:2319 stepper_y:2880 stepper_z:1994
// stepper: stepper_x:139.000000 stepper_y:163.000000 stepper_z:10.000000
// kinematic: X:139.000000 Y:163.000000 Z:10.000000
// toolhead: X:139.000000 Y:163.000000 Z:10.000000 E:0.000000
// gcode: X:139.000000 Y:163.000000 Z:10.000000 E:0.000000
// gcode base: X:0.000000 Y:0.000000 Z:0.000000 E:0.000000
// gcode homing: X:0.000000 Y:0.000000 Z:0.000000
[ERROR] 2022-10-20 10:01:26,867 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,163.000 is z=-0.015000
[ERROR] 2022-10-20 10:01:27,824 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:01:27,832 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.835 <-- ??????
[ERROR] 2020-01-01 01:00:24,572 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:04:10,020 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:05:50,226 [root] [__init__:logging_callback:253] Got EOF when reading from device
[ERROR] 2022-10-20 10:05:50,236 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:05:56,045 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2020-01-01 01:00:23,379 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:09:45,335 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key3", "msg":"Printer is not ready The klippy host software is attempting to connect.  Please retry in a few moments."}
[ERROR] 2022-10-20 10:09:45,337 [root] [gcode:_respond_raw:467] ++++++++++++++msg:ok
[ERROR] 2022-10-20 10:09:45,338 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key3", "msg":"Printer is not ready The klippy host software is attempting to connect.  Please retry in a few moments."}
[ERROR] 2022-10-20 10:09:45,340 [root] [gcode:_respond_raw:467] ++++++++++++++msg:ok
[ERROR] 2022-10-20 10:09:48,217 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:11:04,697 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// {"code":"key61, "msg":"Unknown command:TESTZ", "values": ["TESTZ"]}
[ERROR] 2022-10-20 10:12:22,498 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.017500
[ERROR] 2022-10-20 10:12:23,452 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:12:23,996 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.832 <-- ??????
[ERROR] 2022-10-20 10:13:29,088 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.732 <-- 7.832
[ERROR] 2022-10-20 10:13:37,313 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.632 <-- 7.732
[ERROR] 2022-10-20 10:13:45,606 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.132 <-- 7.632
[ERROR] 2022-10-20 10:14:04,026 [root] [probe:probe_calibrate_finalize:272] ++++++++++++++z_offset_is_ok error
[ERROR] 2022-10-20 10:14:04,027 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: -4.300
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:14:23,208 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 139.000,162.000 is z=0.257500
[ERROR] 2022-10-20 10:14:24,164 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:14:24,171 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 8.107 <-- ??????
[ERROR] 2022-10-20 10:15:11,408 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key197", "msg": "Already in a manual Z probe. Use ABORT to abort it.", "values": []}
[ERROR] 2022-10-20 10:15:31,394 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:15:32,353 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:15:32,366 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.837 <-- ??????
[ERROR] 2022-10-20 10:15:49,150 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.337 <-- 7.837
[ERROR] 2022-10-20 10:16:02,839 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 6.838 <-- 7.337
[ERROR] 2022-10-20 10:16:09,204 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 6.338 <-- 6.838
[ERROR] 2022-10-20 10:16:19,006 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 5.838 <-- 6.338
[ERROR] 2022-10-20 10:16:22,167 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 5.338 <-- 5.838
[ERROR] 2022-10-20 10:16:42,220 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 3.825 <-- 4.325
[ERROR] 2022-10-20 10:16:50,473 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 3.325 <-- 3.825
[ERROR] 2022-10-20 10:16:53,716 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.825 <-- 3.325
[ERROR] 2022-10-20 10:17:05,542 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.325 <-- 2.825
[ERROR] 2022-10-20 10:17:19,067 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.825 <-- 2.325
[ERROR] 2022-10-20 10:17:29,046 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.325 <-- 1.825
[ERROR] 2022-10-20 10:17:35,120 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.825 <-- 1.325
[ERROR] 2022-10-20 10:17:41,922 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.325 <-- 0.825
[ERROR] 2022-10-20 10:18:04,556 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: 0.325 --> 0.825 <-- 1.325
[ERROR] 2022-10-20 10:18:12,191 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: 0.325 --> 0.725 <-- 0.825
[ERROR] 2022-10-20 10:18:24,915 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.113
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:18:35,006 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:18:40,727 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:20:32,364 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// PROBE_ACCURACY at X:0.000 Y:0.000 Z:0.000 (samples=10 retract=8.000 speed=5.0 lift_speed=5.0)
[ERROR] 2022-10-20 10:20:32,367 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key96", "msg": "Must home before probe", "values": []}
[ERROR] 2022-10-20 10:21:00,404 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// PROBE_ACCURACY at X:110.000 Y:125.000 Z:10.000 (samples=10 retract=8.000 speed=5.0 lift_speed=5.0)
[ERROR] 2022-10-20 10:21:02,964 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:06,516 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:10,070 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:13,624 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:17,177 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:20,731 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.010000
[ERROR] 2022-10-20 10:21:24,285 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:27,837 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:31,391 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:34,944 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:21:37,549 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe accuracy results: maximum 2.103000, minimum 2.100500, range 0.002500, average 2.100750, median 2.100500, standard deviation 0.000750
[ERROR] 2022-10-20 10:26:29,875 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Sending BLTOUCH_DEBUG COMMAND=pin_down
[ERROR] 2022-10-20 10:26:44,270 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Sending BLTOUCH_DEBUG COMMAND=pin_up
[ERROR] 2022-10-20 10:27:03,182 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Sending BLTOUCH_DEBUG COMMAND=touch_mode
[ERROR] 2022-10-20 10:27:21,947 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe: TRIGGERED
[ERROR] 2022-10-20 10:30:45,081 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.012500
[ERROR] 2022-10-20 10:30:46,034 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Result is z=2.100500
[ERROR] 2020-01-01 01:00:22,335 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:32:22,010 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key3", "msg":"Printer is not ready The klippy host software is attempting to connect.  Please retry in a few moments."}
[ERROR] 2022-10-20 10:32:22,011 [root] [gcode:_respond_raw:467] ++++++++++++++msg:ok
[ERROR] 2022-10-20 10:32:22,012 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key3", "msg":"Printer is not ready The klippy host software is attempting to connect.  Please retry in a few moments."}
[ERROR] 2022-10-20 10:32:22,015 [root] [gcode:_respond_raw:467] ++++++++++++++msg:ok
[ERROR] 2022-10-20 10:32:24,897 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:34:41,533 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.017500
[ERROR] 2022-10-20 10:34:42,490 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:34:43,022 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.096 <-- ??????
[ERROR] 2022-10-20 10:35:12,916 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.096 <-- 7.096
[ERROR] 2022-10-20 10:35:18,355 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.096 <-- 2.096
[ERROR] 2022-10-20 10:35:20,067 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.096 <-- 1.096
[ERROR] 2022-10-20 10:35:26,913 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.000
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:35:32,812 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:35:38,568 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:36:22,877 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.017500
[ERROR] 2022-10-20 10:36:23,830 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:36:23,838 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 6.983 <-- ??????
[ERROR] 2022-10-20 10:36:43,605 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.983 <-- 6.983
[ERROR] 2022-10-20 10:36:47,437 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 0.000
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:36:50,557 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:36:56,328 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:37:24,122 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.010000
[ERROR] 2022-10-20 10:37:25,077 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:37:25,084 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 4.990 <-- ??????
[ERROR] 2022-10-20 10:37:49,848 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -0.010 <-- 4.990
[ERROR] 2022-10-20 10:37:53,336 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -1.010 <-- -0.010
[ERROR] 2022-10-20 10:37:55,091 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -2.010 <-- -1.010
[ERROR] 2022-10-20 10:37:57,652 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> -3.010 <-- -2.010
[ERROR] 2022-10-20 10:38:01,686 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -3.010 --> -2.510 <-- -2.010
[ERROR] 2022-10-20 10:38:03,984 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.510 --> -2.010 <-- -1.010
[ERROR] 2022-10-20 10:38:07,968 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.510 --> -2.110 <-- -2.010
[ERROR] 2022-10-20 10:38:10,257 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.510 --> -2.210 <-- -2.110
[ERROR] 2022-10-20 10:38:12,676 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: -2.510 --> -2.310 <-- -2.210
[ERROR] 2022-10-20 10:38:16,574 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.300
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:38:18,784 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:38:24,541 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:38:55,621 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// probe at 110.000,125.000 is z=-0.020000
[ERROR] 2022-10-20 10:38:56,576 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Starting manual Z probe. Use TESTZ to adjust position.
// Finish with ACCEPT or ABORT command.
[ERROR] 2022-10-20 10:38:56,583 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 7.280 <-- ??????
[ERROR] 2022-10-20 10:39:09,329 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 2.280 <-- 7.280
[ERROR] 2022-10-20 10:39:12,588 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 1.280 <-- 2.280
[ERROR] 2022-10-20 10:39:14,269 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.280 <-- 1.280
[ERROR] 2022-10-20 10:39:17,712 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.180 <-- 0.280
[ERROR] 2022-10-20 10:39:20,144 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.080 <-- 0.180
[ERROR] 2022-10-20 10:39:23,362 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Z position: ?????? --> 0.030 <-- 0.080
[ERROR] 2022-10-20 10:39:29,197 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// bltouch: z_offset: 2.250
// The SAVE_CONFIG command will update the printer config file
// with the above and restart the printer.
[ERROR] 2022-10-20 10:39:32,339 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:39:38,191 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:40:25,948 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 10:43:33,975 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Disconnect
[ERROR] 2022-10-20 10:43:39,550 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 10:44:08,170 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2020-01-01 01:00:22,362 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 11:12:32,853 [root] [gcode:_respond_raw:467] ++++++++++++++msg:// Klipper state: Ready
[ERROR] 2022-10-20 11:14:20,052 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}
[ERROR] 2022-10-20 11:14:50,136 [root] [gcode:_respond_raw:467] ++++++++++++++msg:!! {"code":"key243","msg":"Move out of range: 1.000 -7.000 5.000 [0.000]", "values":[1.000, -7.000, 5.000, 0.000]}